Professional Documents
Culture Documents
Slides For Project
Slides For Project
Slides For Project
Make at least 500 cells in the Cylinder using the Sizing tool (Right click Mesh then insert then Sizing)
Procedure
Step 05
Create the Mesh
Create at least 10 inflation layers around the Cylinder using the Inflation tool
Procedure
Step 05
Create the Mesh
Select the UDF by using Add button then Build then Load
Right click Setup then Edit
Procedure
Step 06
Setup the Fluent Simulation
Use these settings from Materials tab Use these settings from Boundary Conditions tab
Procedure
Step 06
Setup the Fluent Simulation
Use these settings from Dynamic Mesh Use these settings from Remeshing tab
Procedure
Step 06
Setup the Fluent Simulation
Use these settings from Reference Values tab Use these settings from Methods tab
Procedure
Step 06
Setup the Fluent Simulation