Professional Documents
Culture Documents
V Anvil Micrometer
V Anvil Micrometer
FEATURES
• Measures the outside diameter of cutting • V-anvils with a centerline groove are
Technical Data tools (such as taps, reamers, end mills) available. They are useful for measuring
Accuracy: Refer to the list of specifications with an odd number of flutes. pitch diameters of taps which have a small
Resolution*: .00005" / 0.001mm or 0.001mm • With ratchet stop for constant force. diameter by using single-wire method.
Graduation**: .001" or .0001", 0.01mm
Flatness (spindle/anvil): • Supplied with setting standard. • With SPC output (Series 314).
Analog model: .000024” / 0.6µm, .00005” / 1.3µm • Non-slip grip finish (digital models). • Supplied in fitted plastic case.
Digital Model: .000012" / 0.3µm, .00004" / 1µm
Spindle face: Carbide tipped
Display*: LCD
Battery*: SR44 (1 pc.), 938882
Battery life*: Approx. 2.4 years under normal use
*Digital models **Analog models
314-351-30
Function of Digital Model
Zero / ABS, Data hold, Data output, Preset,
inch/mm conversion (on inch/metric models only)
Function lock, 2 Presets
Alarm: Low voltage, Counting value composition error
114-202
114-204
SPECIFICATIONS
Pitch Diameter Measurement of Tap Metric Digital model for 3 flutes cutting head
by Single-wire Method Inch/Metric Range Resolution Order No. Accuracy Remarks Setting Standard Mass (g)
Wire 314-251-30 ±4µm w/Groove ø5mm 275
Anvil 1 - 15mm 0.001mm
Spindle 314-261-30 ±4µm — ø5mm 275
314-252-30 ±4µm w/Groove ø10mm 410
10 - 25mm 0.001mm
314-262-30 ±4µm — ø10mm 410
25 - 40mm 0.001mm 314-253-30 ±5µm — ø25mm 465
Tap
B-23