Professional Documents
Culture Documents
XL3t Part8
XL3t Part8
XL3t Part8
Filter Change on Time Only In Alloy and Electronic Alloy modes, there is an additional option which
enables you to control whether the time you set or the alloy library controls
the switching of the filters.
Select the Filter Change on Time Only checkbox to override the alloy
library’s settings. When this box is checked, your analyzer will ignore the
alloy library settings and change filters only according to the time intervals
you have set for each filter.
Select the Filter Element List Button to display the Element List for that
filter. This list shows the elements that the filter is best designed to detect.
Filter
Time Field
Select the Time field for the intended filter to change the filter switch time
for that Filter. The Filter Time Editor will appear. This enables you to set
the number of seconds each enabled filter is allotted before auto-switching
will occur when needed during sample testing. Your analyzer will
auto-switch from one filter to another when the testing time for that filter is
greater than or equal to the time you have chosen, and the identified alloy is
flagged as needing the switch in the NITON Alloy Library.
Select the “C” key to clear the current time, then from the virtual numeric
key pad, select each digit you want to input, then select “E” to enter.
The Language
Settings Screen
Selecting the “Language Settings” icon will load the Language Screen,
allowing you to change the language from the default English to French,
Spanish, Portuguese, or German.
Select the down-pointing triangle, and then select the language you want
from the drop down menu. The Menu system will now show on screen in
the language you have selected.
The Printer Setup Screen allows you to adjust which sections of your
reading data are sent to your optional printer. By default, your analyzer
prints the detected list, reading number, reading length, reading mode and
any applicable measurement data such as Alloy match grade names. You can
select any combination of options on the Printer Setup Screen to change
what is printed.
Print < LOD Selecting this option will enable printing of readings which are lower than
the Limit of Detection.
Print Complete Selecting this option will enable printing of all the data fields in the reading.
Print Data Field Selecting this option will enable printing of all entered data fields.
Print Date & Time Selecting this option will enable printing of the Date and Time.
Selecting the Beep Times icon opens the Beep Setup Screen, enabling
changes to the beep settings for various modes. The beeps sound as follows:
Mode This option allows you to change the beep settings for different modes
independently. Select the down arrow to access the list of modes.
First Beep This option allows you to change the delay before the First Beep.
Second Beep This option allows you to change the delay before the Second Beep.
Third Beep This option allows you to change the delay before the Third Beep.
Beep on Grade Match Selecting this option will enable a special beep when the reading chemistry
matches and alloy grade.
Selecting the Data Entry Settings icon opens the Data Entry Settings
Screen, enabling changes to the data entry settings for various modes.
By selecting the down arrow at the right of the “Num of Data Entry Boxes”
field, you may choose between Up to 5 or Up to 8 from the drop down
menu, changing the number of data entry boxes in the Data Entry Screen.