Professional Documents
Culture Documents
Torrington Service Catalog
Torrington Service Catalog
Introduction
Timken Fafnir
1 Ball Bearings
9
Timken Torrington
2 Roller Bearings
262
Timken Torrington
3 Needle Roller Bearings
386
Timken Kilian
4 Precision Machined Bearings
564
5 Engineering E1
Introduction
Catalog Features: 2
Sales Engineering Services: 3
Conditions of Sale: 3
Warranty: 3
How to Order a Replacement Bearing: 4
Timken Fafnir
1 Ball Bearings
Radial and Angular Contact Bearings: 10
Superprecision Bearings: 56
Timken Torrington
2 Roller Bearings
ii
Timken Torrington
3 Needle Roller Bearings
Drawn Cup Needle Roller Bearings: 388
5 Engineering
Product Index
Product Index
iii
SALES ENGINEERING SERVICES the seller. There are no other representations, warran-
Part of the Timken worldwide service system is a corps of ties, or guarantees applicable to the sale of our products
highly trained sales engineers who are available to work unless otherwise expressly agreed to by us in writing.
toward solving new or unusual problems. Timken may have
already solved a similar problem and can offer a speedy, Purchaser’s Exclusive Remedy/Seller’s Express
cost-effective solution. Limit of Liability
Timken reserves the right to change the design and/or Purchaser’s exclusive remedy for any warranty claim, or
specifications of its products without notice. for any claim arising out of the purchase or use of our
To get the best performance out of the application, products, shall be the replacement of said products. We
especially when operating conditions are critical, we encour- will replace our products, without charge to the pur-
age the customer to discuss the application with The Timken chaser, f.o.b. our point of shipment. We will not be liable
Company. for any consequential, incidental, or other damages
sustained by purchaser, including but not limited to, loss
TERMS AND CONDITIONS OF SALE of profits or revenue, loss of use of product, cost of
All products described in this catalog are sold subject to capital, cost of substituted product, facilities, services, or
Timken’s Terms and Conditions of Sale, copies of which are claims of purchaser’s customers for any damages. Any
available from Timken’s Sales Offices. warranty claim of purchaser must be made within one
It is understood that the buyer, in selecting and ordering year of the date of shipment of the product. This
from this catalog which supersedes all previous editions, exclusive remedy applies regardless of the nature of
accepts all Terms and Conditions of Sale including the purchaser’s claim, whether in contract, tort, express or
following: implied warranty, negligence or strict liability, upon which
damages are claimed and regardless of whether the
Limited Warranty same is due to our negligence or any defect in our
We warrant, for a period of one year from the date of product.
shipment of our product to you that our products shall be
free of defects in material and workmanship, as shall be SPECIAL APPLICATIONS
determined by our manufacturing standards, and shall Some products, such as for aerospace applications, are
conform to the description on the face of this acknowl- made to special standards, and only the original equipment
edgment. THE WARRANTY DESCRIBED HEREIN manufacturer can determine if a particular bearing is suitable
SHALL BE IN LIEU OF ANY OTHER WARRANTY, for use in their equipment.
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIM-
ITED TO ANY IMPLIED WARRANTY OF MERCHANT- BEARING SHELF LIFE AND STORAGE
ABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Please note the above policy, listed in its complete form on
The terms contained herein constitute the entire agree- page E4 in the Engineering section of this catalog.
ment of the parties and the warranty representations of
WARNING:
Failure to observe the following warnings could lead to a risk of serious bodily harm:
• Proper maintenance and handling practices are critical. Follow equipment manufacturer’s
installation instructions. Failure to follow installation instructions and to maintain proper
lubrication can result in equipment failure.
• Never spin a bearing with compressed air. The components may be forcefully expelled.
Timken, Fafnir, Torrington and Kilian are registered trademarks of The Timken Company
© 2003 The Timken Company
The ordering of correct replacement bearings is vital to minimize 3. Inner width and outer width (not always the same dimension)
downtime and assure the correct interchanges. Timken suggests that 4. Shape of the outer ring: beveled vs. straight O.D.
you follow these simple steps to identify your bearings and then 5. List the unique features of the bearing or components such as:
proceed to the appropriate catalog section for correct bearing catalog relubrication holes in the outer ring, wireloc (snap ring) groove
number. in the outer ring O.D. etc. Replacement and nomenclature
If no identification number is legible, measure the following information for Timken bearings is found under “Introduction” in
dimensions: the catalog section for each bearing type.
1. Inner ring bore
2. Outer ring outside diameter
Ball Bearings
Roller Bearings
Thrust Bearings
BEARING
NUMBER
Thrust Ball LOCATIONS
BEARING NUMBER LOCATIONS
BEARING
NUMBER
Thrust Spherical Roller LOCATIONS
BEARING NUMBER LOCATIONS
TSR
BEARING
NUMBER
Thrust Cylindrical Roller LOCATIONS
BEARING NUMBER LOCATIONS
TP TPS
BEARING
NUMBER
Thrust Tapered Roller LOCATIONS
BEARING NUMBER LOCATIONS
Housed Units
METAL TAG
1 Timken Fafnir
Ball Bearings
1
Page
Superprecision Bearings . . . . . . . . . . . . . . . . . . 56
W 3 05 K LL
Numbers: Basic Type Series Additional Features
S1, 3, 5, 7, etc., single row inch, extra small B spherical outside diameter
30 single row metric, extra small BR cast bronze retainer
100 single row, extra large D one shield
200 single row, light DD two shields
300 single row, medium G Wireloc (snap ring)
5200 double row, light L one Mechani-Seal
5300 double row, medium LL two Mechani-Seals
7200 single row, angular contact, light MBR machined bronze retainer
7300 single row, angular contact, medium P one seal
7400 single row, angular contact, heavy PP two seals
9100 single row, extra-light PP2, 3, 4, etc. Tri-Ply Seals if prefix letter is W
9300 single row, ultra-light (example W208PPB5)
XLS inch dimension, conrad type R one land riding rubber seal
RR two land riding rubber seals
S external self-aligning
SMBR iron silicon bronze retainer
T one felt seal
TT two felt seals
10
Radial and
Angular Contact
Bearings
Page Page
RADIAL BEARINGS
1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 13 Tri-Ply Seal Series, Non-Relubricatable Type
Extra Small 30 Metric Series . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15 Spherical O.D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Extra Small 33 Series and S Inch Series . . . . . . . . . . . . . . . . . . . . 16 Tri-Ply Seal Series, Relubricatable Type . . . . . . . . . . . . . . . . . . . . 37
F Flanged Series, Cylindrical and Tapered O.D. . . . . . . . . . . . . . . 17 Tri-Ply Seal Series, Disk Harrow Units . . . . . . . . . . . . . . . . . . . . . . 38
RTF-Rubber Tire Flanged Housed Unit . . . . . . . . . . . . . . . . . . . . . 18 Light 200 Series, R-Seal Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Ultra-Light 9300K Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 XLS Series, Conrad and Maximum Capacity Types . . . . . . . . 44-45
11
INTRODUCTION
12
13
d D
One Shield Two Shields One Rubber Seal Two Rubber Seals
D DD P PP
C
Open
34K 34KD 34KDD 0.1575 4 0.6299 16 0.0003 0.008 0.197 5 0.012 0.3 0.01 0.005 125 560 365 1630
35K 35KD 35KDD 0.1969 5 0.7480 19 0.00035 0.009 0.236 6 0.012 0.3 0.02 0.009 195 865 560 2450
36K 36KD 36KDD 0.2362 6 0.7480 19 0.00035 0.009 0.236 6 0.012 0.3 0.02 0.009 195 865 560 2450
37K 37KD 37KDD 0.2756 7 0.8661 22 0.00035 0.009 0.276 7 0.012 0.3 0.02 0.009 312 1400 830 3650
38K 38KD 38KDD 0.3150 8 0.8661 22 0.00035 0.009 0.276 7 0.012 0.3 0.02 0.009 312 1400 830 3650
38KV — — 0.3150 8 0.9449 24 0.00035 0.009 0.276 7 0.012 0.3 0.04 0.018 305 1370 830 3650
39K 39KD 39KDD 0.3543 9 1.0236 26 0.00035 0.009 0.315 8 0.012 0.3 0.04 0.018 440 1960 1120 5000
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
SEALED TYPES
DIMENSIONS – TOLERANCES
Bearing Number Bore Outside Width Fillet Wt. Static Extended
(1)
d Diameter C Radius Load Dynamic
D Rating Load
one seal two seals +0.0000",-.0003" +0.0000",-.00035" +0.000",-0.005" Co Rating
P PP +0.000 mm,-.008 mm +.000 mm,-.009 mm +0.00 mm,-.12 mm CE
36P 36PP 0.2362 6 0.7480 19 0.394 10 0.012 0.3 0.03 0.014 195 865 560 2450
36P2 36PP2 0.2362 6 0.7480 19 0.236 6 0.012 0.3 0.03 0.014 195 865 560 2450
37P 37PP 0.2756 7 0.8661 22 0.394 10 0.012 0.3 0.04 0.018 305 1370 830 3650
37P2 37PP2 0.2756 7 0.8661 22 0.276 7 0.012 0.3 0.04 0.018 312 1400 830 3650
38P 38PP 0.3150 8 0.8661 22 0.394 10 0.012 0.3 0.04 0.018 305 1370 830 3650
38P2 38PP2 0.3150 8 0.8661 22 0.276 7 0.012 0.3 0.04 0.018 312 1400 830 3650
39P 39PP 0.3543 9 1.0236 26 0.315 8 0.024 0.6 0.05 0.023 440 1960 1120 5000
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
14
E E P
C
Extra Small 30 Metric Series C C
MECHANI-SEALS
Fafnir developed Mechani-Seals have been adapted to the 30 metric
series for effective grease retention and exclusion of foreign matter. They B B
are available with one Mechani-Seal (suffix L), with one Mechani-Seal and d K
D K K
one shield (suffix LD), and with two Mechani-Seals (suffix LL).
Because the Mechani-Seal is frictionless, the bearings can be operated at
speeds comparable to those at which the open type bearings can run.
B1 B1 B2
one
one
seal
and two
+0.0000"
D
+0.0000"
-0.0003" -0.00035"
+0.00 mm,-0.12 mm Offset
(2)
Rating
Co
Load
Rating
CE
1
seal shield seals +0.000mm +0.000 mm inner outer width O.D
(3)
L LD LL -0.008 mm -0.009 mm B1 B B2 C E P K
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg lbs. N lbs. N
21
36KL 36KLD 36KLL 0.2362 6 0.7480 19 0.406 10.31 0.386 9.80 0.562 14.27 0.315 8.00 0.012 0.3 0.378 9.60 0.428 10.87 ⁄32 16.7 0.020 0.50 0.03 0.014 195 865 560 2450
3
36KVL — — 0.2362 6 0.9449 24 0.406 10.31 0.386 9.80 — — 0.315 8.00 0.012 0.3 0.378 9.60 — — ⁄4 19.0 0.020 0.50 0.05 0.022 195 865 560 2450
47
37KL 37KLD 37KLL 0.2756 7 0.8661 22 0.406 10.31 0.386 9.80 0.562 14.27 0.315 8.00 0.012 0.3 0.378 9.60 0.440 11.18 ⁄64 18.7 0.020 0.50 0.04 0.018 312 1400 830 3650
3
37KVL 37KVLD — 0.2756 7 0.9449 24 0.406 10.31 0.386 9.80 — — 0.315 8.00 0.012 0.3 0.378 9.60 — — ⁄4 19.0 0.020 0.50 0.05 0.022 312 1400 830 3650
47
38KL 38KLD 38KLL 0.3150 8 0.8661 22 0.406 10.31 0.386 9.80 0.562 14.27 0.315 8.00 0.012 0.3 0.378 9.60 0.440 11.18 ⁄64 18.7 0.020 0.50 0.04 0.018 312 1400 830 3650
3
38KVL 38KVLD 38KVLL 0.3150 8 0.9449 24 0.406 10.31 0.386 9.80 0.562 14.27 0.315 8.00 0.012 0.3 0.378 9.60 0.438 11.13 ⁄4 19.0 0.020 0.50 0.05 0.022 305 1370 830 3650
47
— — 38KLL2 0.3150 8 0.8661 22 — — — — 0.497 12.62 0.315 8.00 0.012 0.3 — — 0.440 11.18 ⁄64 18.7 — — 0.05 0.022 305 1370 830 3650
3
— — 38KVLL2 0.3150 8 0.9449 24 — — — — 0.497 12.62 0.315 8.00 0.012 0.3 — — 0.438 11.13 ⁄4 19.0 — — 0.05 0.022 305 1370 830 3650
27
39KL2 39KLD2 — 0.3543 9 1.0236 26 0.406 10.31 0.386 9.80 — — 0.315 8.00 0.024 0.6 0.378 9.60 — — ⁄32 21.4 0.020 0.50 0.05 0.022 440 1960 1120 5000
— 39KVLD 39KVLL2 0.3543 9 1.1811 30 — — — — 0.646 16.41 0.354 9.00 0.024 0.6 — — 0.629 15.98 1 25.4 0.020 0.50 0.09 0.041 595 2650 1500 6550
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
(2)
Does not apply to bearings with two seals.
Note: Inner ring offset is .020 inches (.51mm) for the L, LD, and VLD versions.
(3)
Two seals (suffix LL) type only.
FELT-SEALS B B
d D d D d D
The 30 metric series is available with one felt seal (suffix T), with one
felt seal and one shield (suffix TD), and with two felt seals (suffix TT).
The felt seal provides an effective barrier against the entrance of
foreign matter and the escape of lubricant. It is a contact seal with
the felt riding on the ground surface of the inner ring O.D.
Because the felt washer absorbs some lubricant, these bearings
can be operated at moderate speeds without excessive heating. C C C1
These bearings are electric motor quality for applications where
One Felt One Felt Two Felt
extra quietness is a requirement. Seal Seal and Shield Seals
T TD TT
DIMENSIONS – TOLERANCES
Bearing Number Bore Outside Ring Width Inner Fillet Wt Static Extended
(1)
d Diameter +0.000", -.005" Ring Radius Load Dynamic
(2)
D +0.00 mm, -.12mm Offset Rating Load
+0.0000" +0.0000" Co Rating
one one seal two -0.0003" -0.00035" CE
seal and shield seals +0.000 mm +0.000 mm inner outer
T TD TT -0.008 mm -0.009 mm B C C1
in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg. lbs. N lbs. N
36KT 36KTD 36KTT 0.2362 6 0.7480 19 0.386 9.80 0.406 10.31 0.562 14.27 0.020 0.50 0.012 0.3 0.03 0.014 195 865 560 2450
36KVT 36KVTD — 0.2362 6 0.9449 24 0.386 9.80 0.406 10.31 — — 0.020 0.50 0.012 0.3 0.06 0.027 305 1370 830 3650
37KT 37KTD — 0.2756 7 0.8661 22 0.386 9.80 0.406 10.31 — — 0.020 0.50 0.012 0.3 0.04 0.018 305 1370 830 3650
37KVT 37KVTD — 0.2756 7 0.9449 24 0.386 9.80 0.406 10.31 — — 0.020 0.50 0.012 0.3 0.05 0.022 305 1370 830 3650
38KT 38KTD 38KTT 0.3150 8 0.8661 22 0.386 9.80 0.406 10.31 0.562 14.27 0.020 0.50 0.012 0.3 0.04 0.018 305 1370 830 3650
38KVT 38KVTD 38KVTT 0.3150 8 0.9449 24 0.386 9.80 0.406 10.31 0.562 14.27 0.020 0.50 0.012 0.3 0.05 0.022 305 1370 830 3650
39KT 39KTD 39KTT 0.3543 9 1.0236 26 0.437 11.10 0.453 11.51 0.562 14.27 0.016 0.40 0.024 0.6 0.06 0.027 440 1960 1120 5000
39KVT 39KVTD — 0.3543 9 1.1811 30 0.480 12.19 0.500 12.70 — — 0.020 0.50 0.024 0.6 0.09 0.041 595 2650 1500 6550
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
(2)
Does not apply to bearings with two seals.
15
DIMENSIONS – TOLERANCES
Bearing Number Bore Outside Width Fillet Wt Static Extended
(1)
d Diameter C Radius Load Dynamic
tolerance D tolerance Rating Load
+0.0000" +0.0000" Co Rating
+0.000 mm +0.000 mm +0.000,-0.005" CE
to minus to minus +0.00 mm,-0.13 mm
standard stainless in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg. lbs. N lbs. N
33K3 A33K3 0.1250 3.175 0.0003 0.008 0.3750 9.525 0.0004 0.010 0.156 3.96 0.012 0.3 0.01 0.005 48 212 160 710
33K4 A33K4 0.1250 3.175 0.0003 0.008 0.5000 12.700 0.0004 0.010 0.172 4.37 0.012 0.3 0.01 0.005 110 490 325 1430
33K5 A33K5 0.1875 4.762 0.0003 0.008 0.5000 12.700 0.0004 0.010 0.156 3.96 0.012 0.3 0.01 0.005 110 490 325 1430
S1K7 AS1K7 0.2500 6.350 0.0003 0.008 0.6250 15.875 0.0004 0.010 0.196 4.98 0.012 0.3 0.01 0.005 125 560 365 1630
S1K AS1K 0.2500 6.350 0.0003 0.008 0.7500 19.050 0.0004 0.010 0.219 5.56 0.016 0.4 0.02 0.009 260 1160 695 3100
S3K AS3K 0.3750 9.525 0.0003 0.008 0.8750 22.225 0.0004 0.010 0.219 5.56 0.016 0.4 0.02 0.009 312 1400 830 3650
S5K AS5K 0.5000 12.700 0.0003 0.008 1.1250 28.575 0.0004 0.010 0.250 6.35 0.016 0.4 0.04 0.018 500 2240 1270 5600
S7K AS7K 0.6250 15.875 0.0003 0.008 1.3750 34.925 0.0005 0.013 0.281 7.14 0.031 0.8 0.07 0.032 682 3050 1700 7500
S8K — 0.7500 19.050 0.0004 0.010 1.6250 41.275 0.0005 0.013 0.312 7.92 0.031 0.8 0.11 0.050 1000 4400 2320 10400
S9K — 0.8750 22.225 0.0004 0.010 1.8750 47.625 0.0005 0.013 0.375 9.52 0.031 0.8 0.14 0.064 1120 4900 2500 11000
S10K — 1.0000 25.400 0.0004 0.010 2.0000 50.800 0.0005 0.013 0.375 9.52 0.031 0.8 0.18 0.082 1120 4900 2500 11000
S11K — 1.1250 28.575 0.0004 0.010 2.1250 53.975 0.0005 0.013 0.375 9.52 0.031 0.8 0.20 0.091 1220 5400 2650 11800
S12K — 1.2500 31.750 0.0005 0.013 2.2500 57.150 0.0005 0.013 0.375 9.52 0.031 0.8 0.22 0.100 1340 6000 2750 12200
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
16
Flanged Series E E
CYLINDRICAL O.D.
Four sizes in the cylindrical O.D. series are offered in a flanged
construction. Flanged bearings have integral shoulders for mounting
in through-bored housings. These flanged bearings have straight D
J
d D d
outside diameters and are interchangeable with the corresponding H H
A A
unflanged sizes. The flanged group is available with double shields.
These bearings are electric motor quality for applications where
extra quietness is a requirement.
C C
Open Type Shielded Type
DIMENSIONS – TOLERANCES
Bearing Number Bore
d
Outside
Diameter
Width
C
Inner Ring
Shoulder
Flange Shielded Type
Overall
Wt Static
Load
Extended
Dynamic
1
chamfer D Width Rating Load
J x 45° A Co Rating
+0.0000" +0.010" +0.000" +0.000" +0.005" +0.000" CE
-0.0003" -0.000" -0.0004 -0.005" -0.002" E -0.005"
+0.000" mm +0.25 mm +0.000 mm +0.00 mm H +0.13 mm ±0.002" +0.00 mm H
open shielded* -0.008 mm -0.00 mm -0.010 mm. -0.13 mm min -0.05 mm ±0.05 mm -0.13 mm min
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg. lbs. N lbs. N
F33K3 F33KDD3 0.1250 3.175 0.012 0.30 0.3750 9.525 0.156 3.96 0.202 5.13 0.440 11.18 0.030 0.76 0.156 3.96 0.183 4.65 0.01 0.005 48 212 160 710
F33K5 F33KDD5 0.1875 4.762 0.012 0.30 0.5000 12.700 0.156 3.96 0.270 6.86 0.565 14.35 0.042 1.07 0.196 4.98 0.248 6.30 0.01 0.005 110 490 325 1430
(1)
FS1K7 FS1KDD7 0.2500 6.350 0.012 0.30 0.6250 15.875 0.196 4.98 0.349 8.86 0.690 17.53 0.042 1.07 0.196 4.98 0.332 8.43 0.01 0.005 125 560 365 1630
(1)
FS3K FS3KDD 0.3750 9.525 0.016 0.41 0.8750 22.225 0.219 5.56 0.517 13.13 0.969 24.61 0.062 1.57 0.281 7.14 0.475 12.06 0.02 0.009 310 1400 830 3650
(1)
Also available in stainless steel. To specify, add prefix “A” before bearing number.
* Also available with two contact seals. To specify, replace “KDD” in part number with “PP”.
E E
F F
TAPERED O.D.
The F Flanged Series has shoulders integral with the bearings for
mounting in through-bored housings. They are used where compact-
ness is essential or where it is not desirable to machine housing
shoulders. All sizes in this series have tapered outside diameters,
J
and all are available with double shields. J
D d D d
These bearings are particularly suitable for such applications as H H
B A B A
precision instruments, packaging machinery, motion picture
projectors and the like. Several sizes in this series are manufactured
in both standard bearing quality, chromium-alloy, high carbon steel
and stainless steel, as indicated in the tables. To specify stainless
steel, use the prefix A before the basic bearing number. Example:
AF4.
These bearings are electric motor quality for applications where C C
extra quietness is a requirement. Open Type Shielded Type
DIMENSIONS – TOLERANCES
Bearing Bore Outside Ring Widths Flange Wt Static Extended
Number d Diameter Inner Outer Load Dynamic
chamfer D Width Rating Load
J x 45° Inner C A Co CE
(3)
+0.0003" +0.010" +0.000" Width Project H +0.000" +0.005"
-0.0000" -0.000" -0.0004" B F -0.004" taper -0.002" E
+0.008 mm +0.025 mm +0.000 mm ±0.010" +0.005" +.00 mm per +0.13 mm ±0.002"
open shielded -0.000 mm" -.00 mm -.010" mm ±0.3 mm ±.13 mm min -0.10 mm foot -0.05 mm ±0.05 mm
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg. lbs. N lbs. N
(1)
F2 — 0.1875 4.762 0.010 0.25 0.4382 11.130 0.189 4.80 0.016 0.41 0.273 6.93 0.163 4.14 0.080 2.03 0.500 12.70 0.042 1.07 0.01 0.005 106 465 260 1160
— F2DD-2 0.1250 3.175 0.010 0.25 0.3757 9.534 0.188 4.77 0.015 0.38 0.181 4.60 0.163 4.14 0.075 1.90 0.438 11.13 0.037 0.94 0.01 0.005 48 212 160 710
F3 — 0.1875 4.762 0.010 0.25 0.5632 14.305 0.218 5.54 0.015 0.38 0.273 6.93 0.195 4.95 0.080 2.03 0.625 15.88 0.042 1.07 0.01 0.005 110 490 325 1430
— F3DD 0.1875 4.762 0.010 0.25 0.5632 14.305 0.250 6.35 0.015 0.38 0.245 6.22 0.226 5.74 0.068 1.73 0.625 15.88 0.042 1.07 0.01 0.005 110 490 325 1430
F4 F4DD 0.2500 6.350 0.010 0.25 0.6257 15.893 0.250 6.35 0.015 0.38 0.331 8.41 0.226 5.74 0.068 1.73 0.687 17.45 0.042 1.07 0.01 0.005 125 560 365 1630
(2)
F5 F5DD 0.3125 7.938 0.010 0.25 0.6882 17.480 0.250 6.35 0.015 0.38 0.410 10.41 0.226 5.74 0.068 1.73 0.750 19.05 0.042 1.07 0.01 0.005 196 865 540 2400
(1)
Full type, no retainer. Not recommended for speeds over 500 RPM.
(2)
H dimension is .381" (9.68 mm) for F5DD.
(3)
Land dimension of the inner ring.
17
Pressed steel housed units designed specifically for light duty applica-
tions are available in shaft sizes from 1⁄4 to 1⁄2 inch. This unit is designed
to simplify mounting on side plate or frame type housings. SET
SCREW
The unit consists of two identical steel stampings which house a
clamp type bearing having a spherical O.D. outer ring. The spherical d1
H2
MIN.
H J d FRAME
inside surface of each stamping mates with the spherical O.D. of the OPENING
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. N
7 9 25 25 7 7 7
S1PPB7-3 ST 0.2500 6.350 ⁄32 5.556 ⁄16 14.287 ⁄32 19.844 0.430 10.922 0.079 2.007 0.0269 0.683 1 ⁄32 45.244 ⁄8 22.225 1 ⁄32 30.956 ⁄32 0.219 4-40 70 312
9 25 3 3 3 17 7
S3PPB15 ST 0.3125 7.937 ⁄32 7.144 ⁄32 19.844 1 ⁄32 27.781 0.562 14.275 0.107 2.718 0.0329 0.836 2 ⁄32 53.181 1 ⁄16 30.163 1 ⁄32 38.894 ⁄32 0.219 8-36 150 668
9 25 3 3 3 17 7
S3PPB5 ST 0.3750 9.525 ⁄32 7.144 ⁄32 19.844 1 ⁄32 27.781 0.562 14.275 0.107 2.718 0.0329 0.836 2 ⁄32 53.181 1 ⁄16 30.163 1 ⁄32 38.894 ⁄32 0.219 8-36 150 668
5 29 9 11 7 25 7
S5PPB2 ST 0.5000 12.700 ⁄16 7.937 ⁄32 23.019 1 ⁄32 32.544 0.625 15.875 0.120 3.048 0.0359 0.912 2 ⁄32 59.531 1 ⁄16 36.512 1 ⁄32 45.244 ⁄32 0.219 8-36 220 980
* All setscrews are hex socket oval point, 6 fluted socket setscrews available upon request. ** Bore tolerance applies prior to collar assembly.
Setscrews with fused plastic patch available at added cost.
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. N
17 9 7 15 5 19
S1PP73RTF 0.2500 6.350 0.762 19.355 0.750 19.050 ⁄32 13.494 ⁄16 14.287 ⁄8 22.225 ⁄32 11.906 ⁄64 1.984 ⁄64 7.541 4-40 26 116
3 25 7 5 5 13
S3PP16RTF 0.3125 7.937 1.074 27.280 1.062 26.975 ⁄4 19.050 ⁄32 19.844 1 ⁄32 30.956 ⁄8 15.875 ⁄32 3.969 ⁄32 10.319 8-36 58 258
3 25 7 5 5 13
S3PP4RTF 0.3750 9.525 1.074 27.280 1.062 26.975 ⁄4 19.050 ⁄32 19.844 1 ⁄32 30.956 ⁄8 15.875 ⁄32 3.969 ⁄32 10.319 8-36 58 258
29 17 45 5 15
S5PP2RTF 0.5000 12.700 1.388 35.255 1.375 34.925 1 25.400 ⁄32 23.019 1 ⁄32 38.894 ⁄64 17.859 ⁄32 3.969 ⁄32 11.906 8-36 88 392
* All setscrews are hex socket oval point, 6 fluted socket setscrews available upon request. ** Bore tolerance applies prior to collar assembly.
Setscrews with fused plastic patch available at added cost.
18
Special Bearings 1/ 2
± 1/ 64
Pulley, guide roller and pinch roll bearings are available in several
bore sizes providing the advantages of light weight, low inertia, low
torque, and accurate running characteristics with minimum runout TO CLEAR .016R
and wobble. Many of these units feature outer ring assemblies with BOTH SIDES
integral molded “tires”. The most commonly used tire materials are
aluminum, steel, and a variety of engineered plastics such as nylon, 1.005
polycarbonate, acetal resin, or polyurethane. The tire material and .995 .7500 .334
.7496 .657
.2500 MIN.
configuration are determined by the particular application require- MAX.
.2495 REF. 5
ments. Standard materials and shapes can be made available in REF. /8
REF.
many sizes; and, Timken Engineering is prepared to cooperate in
testing any material you feel is suitable for your application.
Through Fafnir’s universal ring design, sealed or shielded
versions of the “special” are readily available with the most basic
bearing sizes. Varying degrees of seal drag are offered to suit the
.2812
sealing torque requirements dictated by the environmental conditions .2762
of the application.
The integral assembly design concept offers a complete package
of bearings, housings, shaft, etc. assembled and ready to mount on
S1KDD-RT 1
the machine. Units are custom designed to solve customer assembly
problems, minimize inventory of multiple components, and make
purchasing’s job easier in that one vendor is required instead of
several, all these factors contributing to an overall cost savings.
The bearing units shown have been developed especially for
business machine applications.
19
DIMENSIONS – TOLERANCES
Bearing Bore Outside Width Fillet Wt. Static Extended
(1)
Number d Diameter C Radius Load Dynamic
D Rating Load
tolerance tolerance tolerance Co Rating
+0.0000" +0.0000" +0.0000" CE
+0.000 mm +0.000 mm +0.000 mm
to minus to minus to minus
in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg lbs. N lbs. N
9301K 0.4724 12 0.0003 0.008 0.9449 24 0.00035 0.009 0.236 6 0.005 0.12 0.012 0.3 0.03 0.014 360 1600 830 3650
9302K 0.5906 15 0.0003 0.008 1.1024 28 0.00035 0.009 0.276 7 0.005 0.12 0.012 0.3 0.04 0.018 510 2270 1100 4890
(2)
9303K 0.6693 17 0.0003 0.008 1.1811 30 0.00035 0.009 0.276 7 0.005 0.12 0.012 0.3 0.06 0.027 570 2540 1180 5250
(2)
9305K 0.9843 25 0.0004 0.010 1.6535 42 0.00045 0.011 0.354 9 0.005 0.12 0.012 0.3 0.10 0.045 1020 4540 1800 8010
(2)(3)
9306K 1.1811 30 0.0004 0.010 1.8504 47 0.00045 0.011 0.354 9 0.005 0.12 0.012 0.3 0.16 0.075 1120 4980 1860 8270
9307K 1.3780 35 0.00045 0.012 2.1654 55 0.0005 0.013 0.394 10 0.005 0.12 0.024 0.6 0.21 0.095 1800 8010 3000 13300
9308K 1.5748 40 0.00045 0.012 2.4409 62 0.0005 0.013 0.472 12 0.005 0.12 0.024 0.6 0.31 0.141 2000 8900 3100 13800
9310K 1.9685 50 0.00045 0.012 2.8346 72 0.0005 0.013 0.472 12 0.005 0.12 0.024 0.6 0.37 0.168 2600 11560 3750 16700
9311K 2.1654 55 0.0006 0.015 3.1496 80 0.0005 0.013 0.512* 13 0.006 0.15 0.039 1 0.46 0.209 3150 14010 4250 18900
9313K 2.5591 65 0.0006 0.015 3.5433 90 0.0006 0.015 0.512* 13 0.006 0.15 0.039 1 0.55 0.250 3600 16010 4400 19600
9316K 3.1496 80 0.0006 0.015 4.3307 110 0.0006 0.015 0.630* 16 0.006 0.15 0.039 1 0.80 0.363 5400 24020 6400 28500
(1) (2)
Maximum shaft or housing fillet radius which bearing corners will clear. Also available with rubber seals. Specify 9303PP.
(3)
Also available with two shields. Specify 9306KDD. * Width tolerance is +.000" to -.006" (+.00mm to -.15mm)
in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg lbs. N lbs. N
9100K 0.3937 10 0.0003 0.008 1.0236 26 0.00035 0.009 0.3150 8 0.005 0.12 0.012 0.3 0.04 0.018 440 1960 1160 5160
9101K 0.4724 12 0.0003 0.008 1.1024 28 0.00035 0.009 0.3150 8 0.005 0.12 0.012 0.3 0.04 0.018 530 2360 1320 5870
9102K 0.5906 15 0.0003 0.008 1.2598 32 0.00045 0.011 0.3543 9 0.005 0.12 0.012 0.3 0.06 0.027 630 2800 1430 6360
9103K 0.6693 17 0.0003 0.008 1.3780 35 0.00045 0.011 0.3937 10 0.005 0.12 0.012 0.3 0.09 0.041 720 3200 1530 6800
9104K 0.7874 20 0.0004 0.010 1.6535 42 0.00045 0.011 0.4724 12 0.005 0.12 0.024 0.6 0.16 0.073 1120 5000 2400 10700
9105K 0.9843 25 0.0004 0.010 1.8504 47 0.00045 0.011 0.4724 12 0.005 0.12 0.024 0.6 0.17 0.077 1290 5740 2550 11300
9106K 1.1811 30 0.0004 0.010 2.1654 55 0.0005 0.013 0.5118 13 0.005 0.12 0.039 1.0 0.26 0.118 1800 8010 3350 14600
9107K 1.3780 35 0.00045 0.012 2.4409 62 0.0005 0.013 0.5512 14 0.005 0.12 0.039 1.0 0.32 0.145 2240 9960 4050 18000
9108K 1.5748 40 0.00045 0.012 2.6772 68 0.0005 0.013 0.5906 15 0.005 0.12 0.039 1.0 0.43 0.195 2750 12200 4500 20000
9109K 1.7717 45 0.00045 0.012 2.9528 75 0.0005 0.013 0.6299 16 0.005 0.12 0.039 1.0 0.55 0.249 3350 14900 5400 24000
9110K 1.9685 50 0.00045 0.012 3.1496 80 0.0005 0.013 0.6299 16 0.005 0.12 0.039 1.0 0.60 0.272 3600 16000 5600 24900
9111K 2.1654 55 0.0006 0.015 3.5433 90 0.0006 0.015 0.7087 18 0.006 0.15 0.039 1.0 0.86 0.390 4650 20700 7200 32000
9112K 2.3622 60 0.0006 0.015 3.7402 95 0.0006 0.015 0.7087 18 0.006 0.15 0.039 1.0 0.92 0.417 5100 22600 7500 33400
9113K 2.5591 65 0.0006 0.015 3.9370 100 0.0006 0.015 0.7087 18 0.006 0.15 0.039 1.0 0.98 0.445 5500 24500 7800 34700
9114K 2.7559 70 0.0006 0.015 4.3307 110 0.0006 0.015 0.7874 20 0.006 0.15 0.039 1.0 1.39 0.630 6700 29800 9720 43200
9115K 2.9528 75 0.0006 0.015 4.5276 115 0.0006 0.015 0.7874 20 0.006 0.15 0.039 1.0 1.50 0.680 7350 32700 10000 44500
9116K 3.1496 80 0.0006 0.015 4.9213 125 0.0007 0.018 0.8661 22 0.006 0.15 0.039 1.0 1.95 0.885 8000 35600 12200 54300
9117K 3.3465 85 0.0008 0.020 5.1181 130 0.0007 0.018 0.8661 22 0.008 0.20 0.039 1.0 2.13 0.966 8000 35600 12700 56500
9118K 3.5433 90 0.0008 0.020 5.5118 140 0.0007 0.018 0.9449 24 0.008 0.20 0.059 1.5 2.55 1.157 10800 48000 15000 66700
9119K 3.7402 95 0.0008 0.020 5.7087 145 0.0007 0.018 0.9449 24 0.008 0.20 0.059 1.5 2.62 1.188 11800 52500 15300 68100
9120K 3.9370 100 0.0008 0.020 5.9055 150 0.0007 0.018 0.9449 24 0.008 0.20 0.059 1.5 2.90 1.315 11800 52500 15300 68100
9121K 4.1339 105 0.0008 0.020 6.2992 160 0.0010 0.025 1.0236 26 0.008 0.20 0.079 2.0 3.59 1.628 13400 59600 17600 76900
9122K 4.3307 110 0.0008 0.020 6.6929 170 0.0010 0.025 1.1024 28 0.008 0.20 0.080 2.0 — — 16000 71100 20800 92500
9124K 4.7244 120 0.0008 0.020 7.0866 180 0.0010 0.025 1.1024 28 0.008 0.20 0.079 2.0 4.85 2.200 16000 71100 20000 88900
9126K 5.1181 130 0.0010 0.025 7.8740 200 0.0012 0.030 1.2992 33 0.010 0.25 0.079 2.0 7.39 3.352 20400 90700 26000 115600
9128K 5.5118 140 0.0010 0.025 8.2677 210 0.0012 0.030 1.2992 33 0.010 0.25 0.080 2.0 8.00 3.629 23600 105000 28000 124500
(1)
Maximum shaft or housing fillet radius which bearing corners will clear. Continued on the next page.
20
DIMENSIONS – TOLERANCES
Bearing Bore Outside Width Fillet Wt. Static Extended
(1)
Number d Diameter C Radius Load Dynamic
D Rating Load
tolerance tolerance tolerance Co Rating
+0.0000" +0.0000" +0.000" Ce
+0.000 mm +0.000 mm +0.00 mm
to minus to minus to minus
in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg lbs. N lbs. N
9130K
9132K
5.9055
6.2992
150
160
0.0010
0.0010
0.025
0.025
8.8583
9.4488
225
240
0.0012
0.0012
0.030
0.030
1.3780
1.4961
35
38
0.010
0.010
0.25
0.25
0.08
0.08
2.0
2.0
12.0
14.8
5.5
6.7
20800
31000
92500
138000
25500
37500
113400
166800
1
9134K 6.6929 170 0.0010 0.025 10.2362 260 0.0014 0.035 1.6535 42 0.010 0.25 0.08 2.0 19.8 9.0 36000 160000 42500 189000
9136K 7.0866 180 0.0010 0.025 11.0236 280 0.0014 0.035 1.8110 44 0.010 0.25 0.08 2.0 24.3 11.0 44000 195700 50000 222000
9138K 7.4803 190 0.0012 0.030 11.4173 290 0.0014 0.035 1.8110 46 0.012 0.30 0.08 2.0 26.5 12.0 45500 204000 48000 216000
9140K 7.8740 200 0.0012 0.030 12.2047 310 0.0014 0.035 2.0079 51 0.012 0.30 0.08 2.0 34.0 15.4 55000 245000 55000 245000
9144K 8.6614 220 0.0012 0.030 13.3858 340 0.0016 0.040 2.2047 56 0.012 0.30 0.10 2.5 44.2 20.0 65500 290000 63000 280000
9146K 9.4488 240 0.0012 0.030 14.1732 360 0.0016 0.040 2.2047 56 0.012 0.30 0.10 2.5 47.3 21.5 72000 320000 65500 290000
9152K 10.2362 260 0.0014 0.035 15.7480 400 0.0016 0.040 2.5591 65 0.014 0.35 0.12 3.0 69.6 31.6 90000 400000 78000 345000
9156K 11.0236 280 0.0014 0.035 16.5354 420 0.0018 0.045 2.5591 65 0.014 0.35 0.12 3.0 73.8 33.5 80000 355000 80000 360000
9160K 11.8110 300 0.0014 0.035 18.1102 460 0.0018 0.045 2.9134 74 0.014 0.35 0.12 3.0 102.9 46.6 118000 520000 93000 415000
9164K 12.5984 320 0.0016 0.040 18.8976 480 0.0018 0.045 2.9134 74 0.016 0.40 0.12 3.0 108.3 49.1 127000 570000 98000 430000
9180K 15.7480 400 0.0016 0.040 23.6220 600 0.0020 0.050 3.5433 90 0.016 0.40 0.16 4.0 — — 180000 815000 122000 550000
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
One Two One Two One Shield Open Two Two O.D.
Shield Shields Seal Seals And Seal Type Shields Seals
D DD P PP PD G DDG PPG O.D. Thickness Offset
in mm in mm in mm
21
C
DIMENSIONS – TOLERANCES
Bearing Bore Outside Width Fillet Wt. Static Extended
(1)
Number d Diameter C Radius Load Dynamic
D Rating Load
tolerance tolerance tolerance Co Rating
+0.0000" +0.0000" +0.000" CE
+0.000 mm +0.000 mm +0.00 mm
to minus to minus to minus
in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg lbs. N lbs. N
200K 0.3937 10 0.0003 0.008 1.1811 30 0.00035 0.009 0.3543 9 0.005 0.12 0.024 0.6 0.06 0.027 585 2600 1530 6800
201K 0.4724 12 0.0003 0.008 1.2598 32 0.00045 0.011 0.3937 10 0.005 0.12 0.024 0.6 0.08 0.036 680 3000 1730 7600
202K 0.5906 15 0.0003 0.008 1.3780 35 0.00045 0.011 0.4331 11 0.005 0.12 0.024 0.6 0.09 0.041 830 3470 1930 8650
203K 0.6693 17 0.0003 0.008 1.5748 40 0.00045 0.011 0.4724 12 0.005 0.12 0.024 0.6 0.14 0.064 1060 4700 2450 10900
204K 0.7874 20 0.0004 0.010 1.8504 47 0.00045 0.011 0.5512 14 0.005 0.12 0.039 1.0 0.23 0.104 1460 6500 3250 14400
205K 0.9843 25 0.0004 0.010 2.0472 52 0.0005 0.013 0.5906 15 0.005 0.12 0.039 1.0 0.28 0.127 1760 7800 3600 16000
206K 1.1811 30 0.0004 0.010 2.4409 62 0.0005 0.013 0.6299 16 0.005 0.12 0.039 1.0 0.43 0.195 2550 11300 5000 22200
207K 1.3780 35 0.00045 0.012 2.8346 72 0.0005 0.013 0.6693 17 0.005 0.12 0.039 1.0 0.64 0.29 3450 15300 6550 29100
208K 1.5748 40 0.00045 0.012 3.1496 80 0.0005 0.013 0.7087 18 0.005 0.12 0.039 1.0 0.83 0.376 4500 20000 8300 36900
209K 1.7717 45 0.00045 0.012 3.3465 85 0.0006 0.015 0.7480 19 0.005 0.12 0.039 1.0 0.94 0.426 4550 20200 8300 36900
210K 1.9685 50 0.00045 0.012 3.5433 90 0.0006 0.015 0.7874 20 0.005 0.12 0.039 1.0 1.05 0.476 5200 23100 9000 40000
211K 2.1654 55 0.0006 0.015 3.9370 100 0.0006 0.015 0.8268 21 0.006 0.15 0.059 1.5 1.4 0.635 6550 29100 11000 49000
212K 2.3622 60 0.0006 0.015 4.3307 110 0.0006 0.015 0.8661 22 0.006 0.15 0.059 1.5 1.78 0.807 8000 35500 13400 60000
213K 2.5591 65 0.0006 0.015 4.7244 120 0.0006 0.015 0.9055 23 0.006 0.15 0.059 1.5 2.24 1.016 9000 39900 14600 65000
214K 2.7559 70 0.0006 0.015 4.9213 125 0.0007 0.018 0.9449 24 0.006 0.15 0.059 1.5 2.44 1.107 9800 43500 16000 71100
215K 2.9528 75 0.0006 0.015 5.1181 130 0.0007 0.018 0.9843 25 0.006 0.15 0.059 1.5 2.64 1.198 10000 44400 16000 71100
216K 3.1496 80 0.0006 0.015 5.5118 140 0.0007 0.018 1.0236 26 0.006 0.15 0.079 2.0 3.27 1.483 12200 54200 18300 81300
217K 3.3465 85 0.0008 0.020 5.9055 150 0.0007 0.018 1.1024 28 0.008 0.20 0.079 2.0 4.10 1.86 14000 62200 21600 95900
218K 3.5433 90 0.0008 0.020 6.2992 160 0.0010 0.025 1.1811 30 0.008 0.20 0.079 2.0 4.87 2.209 16000 71100 24500 109000
220K 3.9370 100 0.0008 0.020 7.0866 180 0.0010 0.025 1.3386 34 0.008 0.20 0.080 2.0 8.98 4.07 20800 93000 30500 134000
221K 4.1339 105 0.0008 0.020 7.4803 190 0.0012 0.030 1.4173 36 0.008 0.20 0.080 2.0 8.32 3.77 20800 93000 28500 127000
222K 4.3307 110 0.0008 0.020 7.8740 200 0.0012 0.030 1.4961 38 0.008 0.20 0.080 2.0 9.47 4.3 23600 104900 34500 153000
224K 4.7244 120 0.0008 0.020 8.4646 215 0.0012 0.030 1.5748 40 0.008 0.20 0.080 2.0 15.56 7.06 30000 133000 39000 173000
226K 5.1181 130 0.0010 0.020 9.0551 230 0.0012 0.030 1.5748 40 0.010 0.25 0.120 3.0 14.63 6.64 33500 149000 42500 189000
228K 5.5118 140 0.0010 0.025 9.8425 250 0.0012 0.030 1.6535 42 0.010 0.25 0.120 3.0 24.66 11.19 36500 162000 45000 200000
230K 5.9055 150 0.0010 0.025 10.6299 270 0.0014 0.035 1.7717 45 0.010 0.25 0.120 3.0 26.8 12.1 40500 180000 49000 218000
232K 6.2992 160 0.0010 0.025 11.4173 290 0.0014 0.035 1.8898 48 0.010 0.25 0.120 3.0 33.1 15.0 53000 235000 58500 260000
234K 6.6929 170 0.0010 0.025 12.2047 310 0.0014 0.035 2.0472 52 0.010 0.25 0.160 4.0 41.1 18.7 62000 276000 65500 291000
236K 7.0866 180 0.0010 0.025 12.5984 320 0.0016 0.040 2.0472 52 0.010 0.25 0.160 4.0 42.7 19.4 67000 298000 69500 309000
238K 7.4803 190 0.0012 0.030 13.3858 340 0.0016 0.040 2.1654 55 0.012 0.30 0.160 4.0 50.7 23.0 65000 290000 67000 300000
240K 7.8740 200 0.0012 0.030 14.1732 360 0.0016 0.040 2.2835 58 0.012 0.30 0.160 4.0 58.2 26.4 83000 375000 80000 355000
242K 8.2677 210 0.0012 0.030 14.9606 380 0.0016 0.040 2.4016 61 0.012 0.30 0.160 4.0 71.4 32.4 76500 335000 73500 325000
244K 8.6614 220 0.0012 0.030 15.7480 400 0.0016 0.040 2.5591 65 0.012 0.30 0.160 4.0 81.4 36.9 86500 380000 80000 355000
246K 9.0551 230 0.0012 0.030 16.5354 420 0.0018 0.045 2.6772 68 0.012 0.30 0.160 4.0 93.3 44.6 95000 425000 85000 380000
248K 9.4488 240 0.0012 0.030 17.3228 440 0.0018 0.045 2.8346 72 0.012 0.30 0.160 4.0 103.1 46.8 116000 520000 102000 455000
250K 9.8425 250 0.0014 0.035 18.1102 460 0.0018 0.045 2.9921 76 0.012 0.30 0.160 4.0 122.4 55.5 129000 585000 110000 490000
252K 10.2362 260 0.0014 0.035 18.8976 480 0.0018 0.045 3.1496 80 0.014 0.35 0.200 5.0 139.0 63.0 143000 640000 118000 520000
256K 11.0236 280 0.0014 0.035 19.6850 500 0.0018 0.045 3.1496 80 0.014 0.35 0.200 5.0 141.4 64.1 160000 710000 125000 560000
260K 11.8110 300 0.0014 0.035 21.2598 540 0.0020 0.050 3.3465 85 0.014 0.35 0.200 5.0 192.7 87.4 150000 670000 116000 520000
264K 12.5984 320 0.0016 0.040 22.8346 580 0.0020 0.050 3.6220 92 0.016 0.40 0.200 5.0 208.5 94.6 220000 980000 160000 710000
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
22
— — — — — — — — — — — — — — — — — —
— — — — — — — — — — — — — — — — — —
222KD — — — — — — — — — — — — — — — — —
(1) (3)
The snap ring is normally packaged separately in the box with the bearing. Also available in"VV" sealed design, check on availability.
(2)
Available with snap ring as 200PDG.
Note: “N” prefix for NP(P) seals indicate non-removable seal.
23
DIMENSIONS – TOLERANCES
Bearing Bore Outside Width Fillet (1) Wt. Static Extended
Number d Diameter C Radius Load Dynamic
D Rating Load
tolerance tolerance tolerance CO Rating*
+0.0000" +0.0000" +0.000" CE
+0.000mm +0.000mm +0.00mm
to minus to minus to minus
in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg lbs. N lbs. N
202W 0.5906 15 0.0003 0.008 1.3780 35 0.00045 0.011 0.4331 11 0.005 0.12 0.024 0.6 0.12 0.054 1140 5060 2450 11000
(2)
204W 0.7874 20 0.0004 0.010 1.8504 47 0.00045 0.011 0.5512 14 0.005 0.12 0.039 1.0 0.25 0.113 2120 9300 4400 19500
205W(2) 0.9843 25 0.0004 0.010 2.0472 52 0.0005 0.013 0.5906 15 0.005 0.12 0.039 1.0 0.31 0.141 2750 12200 5100 22600
206W 1.1811 30 0.0004 0.010 2.4409 62 0.0005 0.013 0.6299 16 0.005 0.12 0.039 1.0 0.47 0.213 3800 16900 6950 31000
207W 1.3780 35 0.00045 0.012 2.8346 72 0.0005 0.013 0.6693 17 0.005 0.12 0.039 1.0 0.69 0.313 5100 22600 9000 40000
208W 1.5748 40 0.00045 0.012 3.1496 80 0.0005 0.013 0.7087 18 0.005 0.12 0.039 1.0 0.91 0.413 6400 28400 10600 47000
209W 1.7717 45 0.00045 0.012 3.3465 85 0.0006 0.015 0.7480 19 0.005 0.12 0.039 1.0 1.02 0.463 7100 31500 11200 50000
210W 1.9685 50 0.00045 0.012 3.5433 90 0.0006 0.015 0.7874 20 0.005 0.12 0.039 1.0 1.15 0.522 7800 34600 11800 52000
211W 2.1654 55 0.0006 0.015 3.9370 100 0.0006 0.015 0.8268 21 0.006 0.15 0.059 1.5 1.50 0.68 9150 40600 13700 61000
212W 2.3622 60 0.0006 0.015 4.3307 110 0.0006 0.015 0.8661 22 0.006 0.15 0.059 1.5 1.95 0.885 12200 54200 17600 78000
213W 2.5591 65 0.0006 0.015 4.7244 120 0.0006 0.015 0.9055 23 0.006 0.15 0.059 1.5 2.66 1.207 14600 64800 20800 92000
214W 2.7559 70 0.0006 0.015 4.9213 125 0.0007 0.018 0.9449 24 0.006 0.15 0.059 1.5 2.70 1.225 16000 71100 21600 96000
215W 2.9528 75 0.0006 0.015 5.1181 130 0.0007 0.018 0.9843 25 0.006 0.15 0.059 1.5 2.94 1.334 17000 75500 22400 99000
216W 3.1496 80 0.0006 0.015 5.5118 140 0.0007 0.018 1.0236 26 0.006 0.15 0.079 2.0 3.60 1.633 20400 90600 26000 114000
217W 3.3465 85 0.0008 0.020 5.9055 150 0.0007 0.018 1.1024 28 0.008 0.20 0.079 2.0 4.45 2.019 22400 96000 29000 129000
218W 3.5433 90 0.0008 0.020 6.2992 160 0.0010 0.025 1.1811 30 0.008 0.20 0.079 2.0 5.49 2.49 25500 96500 33500 149000
219W 3.7402 95 0.0008 0.020 6.6929 170 0.0010 0.025 1.2598 32 0.008 0.20 0.079 2.0 6.70 3.039 29000 112000 38000 169000
220W 3.9370 100 0.0008 0.020 7.0866 180 0.0010 0.025 1.3386 34 0.008 0.20 0.080 2.0 8.09 3.67 33500 127000 42500 188000
221W 4.1339 105 0.0008 0.020 7.4803 190 0.0012 0.030 1.4173 36 0.008 0.20 0.080 2.0 9.43 4.277 35500 134000 44000 195000
222W 4.3307 110 0.0008 0.020 7.8740 200 0.0012 0.030 1.4961 38 0.008 0.20 0.080 2.0 11.34 5.144 42500 160000 50000 222000
224W3 4.7244 120 0.0008 0.020 8.4646 215 0.0012 0.030 1.5748 40 0.010 0.25 0.080 2.0 14.52 6.586 41500 156000 50000 222000
226W3 5.1181 130 0.0010 0.020 9.0551 230 0.0012 0.030 1.5748 40 0.010 0.25 0.120 3.0 16.80 7.62 53000 196000 58500 260000
228W3 5.5118 140 0.0010 0.025 9.8425 250 0.0012 0.030 1.6535 42 0.010 0.25 0.120 3.0 20.50 9.3 58500 260000 61000 270000
230W 5.9055 150 0.0010 0.025 10.6299 270 0.0014 0.035 1.7717 45 0.010 0.25 0.120 3.0 27.50 12.5 65500 290000 67000 300000
232W 6.2992 160 0.0010 0.025 11.4173 290 0.0014 0.035 1.8898 48 0.010 0.25 0.120 3.0 34.00 15.4 76500 340000 73500 325000
234W 6.6929 170 0.0010 0.025 12.2047 310 0.0014 0.035 2.0472 52 0.010 0.25 0.160 4.0 42.00 19 85000 375000 78000 345000
236W 7.0866 180 0.0010 0.025 12.5984 320 0.0016 0.040 2.0472 52 0.010 0.25 0.160 4.0 43.80 19.9 90000 405000 81500 365000
238W 7.4803 190 0.0012 0.030 13.3858 340 0.0016 0.040 2.1654 55 0.012 0.30 0.160 4.0 52.00 23.6 104000 465000 91500 405000
240W 7.8740 200 0.0012 0.030 14.1732 360 0.0016 0.040 2.2835 58 0.012 0.30 0.160 4.0 59.80 27.1 125000 560000 106000 465000
242W 8.2677 210 0.0012 0.030 14.9606 380 0.0016 0.040 2.4016 61 0.012 0.30 0.160 4.0 73.30 33.2 129000 570000 104000 465000
244W 8.6614 220 0.0012 0.030 15.7480 400 0.0016 0.040 2.5591 65 0.012 0.30 0.160 4.0 83.90 38.1 153000 680000 120000 530000
246W 9.0551 230 0.0012 0.030 16.5354 420 0.0018 0.045 2.6772 68 0.012 0.30 0.160 4.0 100.70 45.6 156000 695000 118000 530000
248W 9.4488 240 0.0012 0.030 17.3228 440 0.0018 0.045 2.8346 72 0.012 0.30 0.160 4.0 107.40 48.7 193000 865000 143000 640000
250W 9.8425 250 0.0012 0.030 18.1102 460 0.0018 0.045 2.9921 76 0.012 0.30 0.160 4.0 126.80 57.5 208000 930000 150000 670000
252W 10.2362 260 0.0014 0.035 18.8976 480 0.0018 0.045 3.1496 80 0.014 0.35 0.200 5.0 144.20 65.4 232000 1020000 160000 720000
256W 11.0236 280 0.0014 0.035 19.6850 500 0.0018 0.045 3.1496 80 0.014 0.35 0.200 5.0 147.40 66.8 255000 1120000 170000 765000
260W 11.8110 300 0.0014 0.035 21.2598 540 0.0020 0.050 3.3465 85 0.014 0.35 0.200 5.0 198.00 89.8 245000 1100000 160000 720000
264W 12.5984 320 0.0016 0.040 22.8346 580 0.0020 0.050 3.6220 92 0.016 0.40 0.200 5.0 219.10 99.3 355000 1560000 216000 965000
(1)
Maximum shaft or housing fillet radius which bearing corners will clear. * For applications where thrust load exceeds 60% of radial load consult Timken.
(2)
These sizes have molded nylon cages.
24
Listed in the table below are Timken's line of Fafnir's maximum capacity
type bearings (200W series) with shields, seals and snap ring combina-
tions. The bearing number suffixes denote the following:
— — — — — — — — — — — — —
1
204WD — — — 204WG — — 2 ⁄16 52.4 0.042 1.07 0.136 3.45
17
205WD — — — 205WG — — 2 ⁄64 57.5 0.042 1.07 0.136 3.45
21
206WD — — — 206WG 206WDG — 2 ⁄32 67.5 0.065 1.65 0.190 4.83
5
207WD — — — 207WG 207WDG — 3 ⁄64 78.2 0.065 1.65 0.190 4.83
13
208WD 208WDD — — 208WG 208WDG 208WDDG 3 ⁄32 86.5 0.065 1.65 0.190 4.83
19
209WD 209WDD — — 209WG 209WDG — 3 ⁄32 91.3 0.065 1.65 0.190 4.83
(2) 51
210WD 210WDD — — 210WG 210WDG — 3 ⁄64 96.4 0.095 2.41 0.220 5.59
(3) 3
211WD 211WDD — — 211WG 211WDG — 4 ⁄16 106.4 0.095 2.41 0.220 5.59
37
212WD 212WDD — — 212WG 212WDG 212WDDG 4 ⁄64 116.3 0.095 2.41 0.220 5.59
3
213WD 213WDD 213WNP 213WNPP 213WG 213WDG 213WDDG 5 ⁄32 129.4 0.109 2.77 0.265 6.73
19
214WD 214WDD — — 214WG 214WDG — 5 ⁄64 134.5 0.109 2.77 0.265 6.73
1
215WD 215WDD 215WNP 215WNPP 215WG 215WDG 215WDDG 5 ⁄2 139.7 0.109 2.77 0.265 6.73
57
216WD 216WDD — — 216WG 216WDG — 5 ⁄64 149.6 0.109 2.77 0.297 7.54
9
217WD 217WDD — — 217WG 217WDG — 6 ⁄32 159.5 0.109 2.77 0.297 7.54
43
218WD 218WDD 218WNP — 218WG — — 6 ⁄64 169.5 0.109 2.77 0.297 7.54
219WD 219WDD — — — — — — — — — — —
19
220WD 220WDD — — 220WG — — 7 ⁄32 192.9 0.12 3.05 0.339 8.61
221WD — — — — — — — — — — — —
222WD — — — — — — — — — — — —
(4)
224WD — — — — — — — — — — — —
(1)
The snap ring is normally packaged separately in the box with the bearing.
(2)
Also available as a GWD type-filling slot opposite the shield and snap ring.
(3)
Also available as 211GW with filling slot on same side as snap ring.
(4)
Width is 1.6535" for the 224WD bearing.
25
DIMENSIONS – TOLERANCES
Bearing Number Bore Outside Diameter Width Inner Ring Widths Fillet Wt. Static Extended
(1)
d D B1 Ring +0.000", –.005" Radius Load Dynamic
one seal tolerance tolerance Offset 0.00",–.12mm Rating Load
one and +0.0000" +0.0000" Co Rating
seal shield +0.000 mm +0.000 mm Inner Outer CE
L LD to minus to minus B C
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg. lbs. N lbs. N
200KL 200KLD 0.3937 10 0.0003 0.008 1.1811 30 0.00035 0.009 0.500 12.70 0.020 0.51 0.480 12.19 0.354 8.99 0.024 0.6 0.08 0.036 585 2650 1530 6550
201KL 201KLD 0.4724 12 0.0003 0.008 1.2598 32 0.00045 0.011 0.500 12.70 0.020 0.51 0.480 12.19 0.394 10.01 0.024 0.6 0.09 0.041 680 3000 1730 7500
— 201KLD2 0.5118 13 0.0003 0.008 1.2598 32 0.00045 0.011 0.500 12.70 0.020 0.51 0.480 12.19 0.394 10.01 0.024 0.6 0.09 0.041 680 3000 1730 7500
201KL3 — 0.4358 11.07 0.0003 0.008 1.2598 32 0.00045 0.011 0.500 12.70 0.020 0.51 0.480 12.19 0.394 10.01 0.024 0.6 0.09 0.041 680 3000 1730 7500
202KL4 202KLD4 0.5512 14 0.0003 0.008 1.3780 35 0.00045 0.011 0.500 12.70 0.020 0.51 0.480 12.19 0.433 11.00 0.024 0.6 0.10 0.045 830 3690 1930 8650
202KL 202KLD 0.5906 15 0.0003 0.008 1.3780 35 0.00045 0.011 0.500 12.70 0.020 0.51 0.480 12.19 0.433 11.00 0.024 0.6 0.10 0.045 830 3450 1930 8650
202KL3 202KLD3 0.6299 16 0.0003 0.008 1.3780 35 0.00045 0.011 0.500 12.70 0.020 0.51 0.480 12.19 0.433 11.00 0.024 0.6 0.10 0.045 830 3450 1930 8650
203KL 203KLD 0.6693 17 0.0003 0.008 1.5748 40 0.00045 0.011 0.563 14.30 0.025 0.64 0.538 13.67 0.472 11.99 0.024 0.6 0.16 0.073 1060 4700 2450 10800
204KL 204KLD 0.7874 20 0.0004 0.010 1.8504 47 0.00045 0.011 0.625 15.88 0.025 0.64 0.600 15.24 0.551 14.00 0.039 1.0 0.25 0.113 1460 6200 3200 14300
205KL 205KLD 0.9843 25 0.0004 0.010 2.0472 52 0.0005 0.013 0.625 15.88 0.025 0.64 0.600 15.24 0.591 15.01 0.039 1.0 0.29 0.132 1760 7800 3600 16000
206KL 206KLD 1.1811 30 0.0004 0.010 2.4409 62 0.0005 0.013 0.787 20.00 0.039 0.99 0.748 19.00 0.630 16.00 0.039 1.0 0.51 0.231 2550 10000 5000 22200
207KL 207KLD 1.3780 35 0.00045 0.012 2.8346 72 0.0005 0.013 0.827 21.00 0.039 0.99 0.787 20.00 0.669 17.00 0.039 1.0 0.71 0.322 3450 13700 6550 29000
209KL 209KLD 1.7717 45 0.00045 0.012 3.3465 85 0.0006 0.015 1.024 26.00 — — 1.024 26.00 0.748 19.00 0.039 1.0 1.12 0.508 4550 17600 8300 37000
211KL 211KLD 2.1654 55 0.0006 0.015 3.9370 100 0.0006 0.015 1.063 27.00 — — 1.063 27.00 0.827 21.01 0.059 1.5 1.65 0.748 6550 29100 11000 49000
DIMENSIONS – TOLERANCES
Bearing Number Bore Outside Diameter Ring Widths Fillet Wt Static Extended
(1)
d D +0.000,–.005" Radius Load Dynamic
tolerance tolerance +0.00,–.12 mm Rating Load
two two +0.0000" +0.0000" Co Rating
seals seals +0.000 mm +0.000 mm Inner Outer CE
LL NPP to minus to minus B2 C
in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg. lbs. N lbs. N
(4)
200KLL2 200KRR3 0.3937 10 0.0003 0.008 1.1811 30 0.00035 0.009 0.646 16.40 0.354 8.99 0.024 0.6 0.08 0.036 585 2650 1530 6800
201KLL2 — 0.4724 12 0.0003 0.008 1.2598 32 0.00045 0.011 0.606 15.40 0.394 10.01 0.024 0.6 0.09 0.041 680 3000 1700 7500
201KLL3 — 0.5118 13 0.0003 0.008 1.2598 32 0.00045 0.011 0.606 15.40 0.394 10.01 0.024 0.6 0.09 0.041 680 3000 1700 7500
202KLL2 — 0.5906 15 0.0003 0.008 1.3780 35 0.00045 0.011 0.567 14.40 0.433 11.00 0.024 0.6 0.10 0.045 830 3690 1930 8650
202KLL3 202NPP11 0.6299 16 0.0003 0.008 1.3780 35 0.00045 0.011 0.567 14.40 0.433 11.00 0.024 0.6 0.10 0.045 830 3690 1930 8650
(2)
203KLL2 203NPP8 0.6693 17 0.0003 0.008 1.5748 40 0.00045 0.011 0.654 16.60 0.472 11.99 0.024 0.6 0.16 0.073 1060 4700 2450 10800
204KLL2 204NPP7 0.7874 20 0.0004 0.010 1.8504 47 0.00045 0.011 0.699 17.75 0.551 14.00 0.039 1.0 0.25 0.113 1460 6200 3200 14300
(3)
205KLL2 205NPP2 0.9843 25 0.0004 0.010 2.0472 52 0.0005 0.013 0.659 16.75 0.591 15.01 0.039 1.0 0.29 0.132 1760 7800 3600 16000
206KLL 206NPP2 1.1811 30 0.0004 0.010 2.4409 62 0.0005 0.013 0.945 24.00 0.630 16.00 0.039 1.0 0.51 0.231 2550 11300 5000 22200
207KLL — 1.3780 35 0.00045 0.012 2.8346 72 0.0005 0.013 0.984 25.00 0.669 17.00 0.039 1.0 0.71 0.322 3450 15300 6550 29000
208KLL — 1.5748 40 0.00045 0.012 3.1496 80 0.0005 0.013 1.188 30.18 0.709 18.01 0.039 1.0 1.02 0.463 4550 20200 8150 36000
209KLL — 1.7717 45 0.00045 0.012 3.3465 85 0.0006 0.015 1.181 30.00 0.748 19.00 0.039 1.0 1.12 0.508 4550 20200 8300 37000
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
(2)
Also available as 203KLL with .718" (18.24mm) inner ring width.
(3)
Also available as 205KLL with .812" (20.64mm) inner ring width.
(4)
Equipped with “R” seals.
26
E E P C
C C C
B B
d K K K D d
D
B1 B1 B2
One Mechani-Seal One Shield and
B2
Two Mechani-Seals Two Rubber Seals
(2)
1
L Mechani-Seal LL NPP
LD
OFFSET
THICKNESS
O.D.
LG LDG LLG
(1)
(Seal Projection) One One Two Snap Ring
(L, LD, LL Types Only) Mechani-Seal Mechani-Seal Mechani-Seals
and Shield
Width O.D.
E P K LG LDG LLG O.D. Thickness Offset
27
DIMENSIONS – TOLERANCES
Bearing Number Bore Outside Ring Widths Inner Fillet Wt. Static Extended
(1)
d Diameter 0.000",-.005" Ring Radius Load Dynamic
D 0.000",-.12 mm Offset Rating Load
one one seal tolerance tolerance CO Rating
seal and shield +0.0000" +0.0000" CE
T TD +0.000 mm +0.000 mm inner outer
to minus to minus B C
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg lbs. N lbs. N
200KT 200KTD 0.3937 10 0.0003 0.008 1.1811 30 0.00035 0.009 0.480 12.19 0.500 12.70 0.020 0.51 0.024 0.6 0.10 0.045 585 2600 1530 6790
— 200KTD2 0.4724 12 0.0003 0.008 1.1811 30 0.00035 0.009 0.480 12.19 0.500 12.70 0.020 0.51 0.024 0.6 0.10 0.045 585 2600 1530 6790
201KT 201KTD 0.4724 12 0.0003 0.008 1.2598 32 0.00045 0.011 0.480 12.19 0.500 12.70 0.020 0.51 0.024 0.6 0.10 0.045 680 3000 1730 7680
201KT2 201KTD2 0.5118 13 0.0003 0.008 1.2598 32 0.00045 0.011 0.480 12.19 0.500 12.70 0.020 0.51 0.024 0.6 0.10 0.045 680 3000 1730 7680
202KT 202KTD 0.5906 15 0.0003 0.008 1.3780 35 0.00045 0.011 0.480 12.19 0.500 12.70 0.020 0.51 0.024 0.6 0.11 0.05 830 3600 1930 8650
(2) (2)
202KT3 202KTD3 0.6299 16 0.0003 0.008 1.3780 35 0.00045 0.011 0.480 12.19 0.500 12.70 0.020 0.51 0.024 0.6 0.11 0.05 830 3600 1930 8650
203KT 203KTD 0.6693 17 0.0003 0.008 1.5748 40 0.00045 0.011 0.538 13.67 0.563 14.30 0.025 0.64 0.024 0.6 0.17 0.077 1060 4700 2450 10900
204KT 204KTD 0.7874 20 0.0004 0.010 1.8504 47 0.00045 0.011 0.600 15.24 0.625 15.88 0.025 0.64 0.039 1.0 0.26 0.118 1460 6500 3250 14400
205KT 205KTD 0.9843 25 0.0004 0.010 2.0472 52 0.0005 0.013 0.600 15.24 0.625 15.88 0.025 0.64 0.039 1.0 0.29 0.132 1760 7800 3600 16000
206KT 206KTD 1.1811 30 0.0004 0.010 2.4409 62 0.0005 0.013 0.748 19.00 0.788 19.99 0.039 0.99 0.039 1.0 0.54 0.245 2550 11300 5000 22200
207KT 207KTD 1.378 35 0.00045 0.012 2.8346 72 0.0005 0.013 0.787 19.99 0.827 21.01 0.039 0.99 0.039 1.0 0.79 0.358 3450 15300 6550 29000
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
(2)
202KT3 has .484" (12.29mm) inner ring width.
DIMENSIONS – TOLERANCES
Bearing Bore Outside Ring Widths Fillet Wt. Static Extended
(1)
Number d Diameter +0.000" Radius Load Dynamic
D -0.005" Rating Load
two tolerance tolerance +0.00 mm CO Rating
seals +0.0000" +0.0000" -0.12 mm CE
TT +0.000 mm +0.000 mm
to minus to minus C1
200KTT 0.3937 10 0.0003 0.008 1.1811 30 0.00035 0.009 0.656 16.66 0.024 0.6 0.10 0.045 585 2600 1530 6790
201KTT 0.4724 12 0.0003 0.008 1.2598 32 0.00045 0.011 0.656 16.66 0.024 0.6 0.10 0.045 680 3000 1730 7680
201KTT3 0.5118 13 0.0003 0.008 1.2598 32 0.00045 0.011 0.656 16.66 0.024 0.6 0.10 0.045 680 3000 1730 7680
202KTT 0.5906 15 0.0003 0.008 1.3780 35 0.00045 0.011 0.656 16.66 0.024 0.6 0.11 0.050 830 3600 1930 8650
203KTT 0.6693 17 0.0003 0.008 1.5748 40 0.00045 0.011 0.718 18.24 0.024 0.6 0.17 0.077 1060 4700 2450 10900
204KTT 0.7874 20 0.0004 0.010 1.8504 47 0.00045 0.011 0.812 20.62 0.039 1.0 0.26 0.118 1460 6500 3250 14400
205KTT 0.9843 25 0.0004 0.010 2.0472 52 0.0005 0.013 0.812 20.62 0.039 1.0 0.29 0.132 1760 7800 3600 16000
206KTT 1.1811 30 0.0004 0.010 2.4409 62 0.0005 0.013 0.945 24.00 0.039 1.0 0.54 0.245 2550 11300 5000 22200
207KTT 1.3780 35 0.00045 0.012 2.8346 72 0.0005 0.013 0.984 25.00 0.039 1.0 0.79 0.358 3450 15300 6550 29000
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
28
OFFSET
THICKNESS
O.D.
DIMENSIONS – TOLERANCES
(3)
Bearing Bore Outside Width Fillet Wt. Static Extended Snap Ring PPG
(1)
Number d Diameter C Radius Load Dynamic
D Rating Load
Co Rating
CE
tolerance tolerance +0.000"
Contact Mechani- +0.0000" +0.0000" -.005"
Seal seal +0.000 mm +0.000 mm +0.00 mm
PP LL to minus to minus -.12 mm O.D. thickness offset
in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg lbs. N lbs. N in. mm in. mm in. mm
W200PP — 0.3937 10 0.0003 0.008 1.1811 30 0.00035 0.009 0.562 14.27 0.024 0.6 0.10 0.045 600 2650 1500 6550 — — — — — —
W201PP — 0.4724 12 0.0003 0.008 1.2598 32 0.00045 0.011 0.625 15.88 0.024 0.6 0.12 0.054 695 3000 1700 7500 — — — — — —
W202PP — 0.5906 15 0.0003 0.008 1.3780 35 0.00045 0.011 0.625 15.88 0.024 0.6 0.14 0.064 780 3450 1930 8650 — — — — — —
(2) 3
W203PP — 0.6693 17 0.0003 0.008 1.5748 40 0.00045 0.011 0.688 17.48 0.024 0.6 0.20 0.091 1000 4400 2360 10600 1 ⁄4 44.4 0.042 1.07 0.185 4.7
W204PP W204KLL 0.7874 20 0.0004 0.010 1.8504 47 0.00045 0.011 0.812 20.62 0.039 1.0 0.33 0.150 1400 6200 3200 14300 — — — — — —
(2) 17
W205PP W205KLL 0.9843 25 0.0004 0.010 2.0472 52 0.0005 0.013 0.812 20.62 0.039 1.0 0.39 0.177 1560 6950 3450 15600 2 ⁄64 57.5 0.042 1.07 0.225 5.72
(2) 21
W206PP W206KLL 1.1811 30 0.0004 0.010 2.4409 62 0.0005 0.013 0.938 23.83 0.039 1.0 0.65 0.295 2280 10000 4800 21600 2 ⁄32 67.5 0.065 1.65 0.242 6.15
W207PP W207KLL 1.3780 35 0.00045 0.012 2.8346 72 0.0005 0.013 1.062 26.97 0.039 1.0 1.01 0.458 3050 13700 6400 28500 — — — — — —
W208PP W208KLL 1.5748 40 0.00045 0.012 3.1496 80 0.0005 0.013 1.188 30.18 0.039 1.0 1.39 0.630 4000 17600 8150 36000 — — — — — —
W209PP W209KLL 1.7717 45 0.00045 0.012 3.3465 85 0.0006 0.015 1.188 30.18 0.039 1.0 1.47 0.668 4000 17600 8150 36000 — — — — — —
W210PP — 1.9685 50 0.00045 0.012 3.5433 90 0.0006 0.015 1.188 30.18 0.039 1.0 1.69 0.767 4500 19600 8800 39000 — — — — — —
W214PP — 2.7559 70 0.0006 0.015 4.9213 125 0.0007 0.018 1.562 39.67 0.059 1.5 3.99 1.810 8500 37500 15600 69500 — — — — — —
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
(2)
Also available with snap ring. To order, add suffix “G” to bearing number. Example: W205PPG.
(3)
The snap ring is normally packaged separately in the box with the bearing.
29
DIMENSIONS – TOLERANCES
Bearing Bore Outside Diameter Width Fillet Wt. Static Extended
(1)
Number d C Radius Load Dynamic
tolerance tolerance tolerance CO Rating
+0.0000" +0.0000" +0.000" CE
+0.000 mm +.0.000 mm +.0.00 mm
to minus to minus to minus
in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg lbs. N lbs. N
300K 0.3937 10 0.0003 0.008 1.378 35 0.00045 0.011 0.433 11 0.005 0.12 0.024 0.6 0.12 0.054 780 3460 2080 9200
301K 0.4724 12 0.0003 0.008 1.4567 37 0.00045 0.011 0.472 12 0.005 0.12 0.039 1.0 0.14 0.064 815 3620 2120 9400
302K 0.5906 15 0.0003 0.008 1.6535 42 0.00045 0.011 0.512 13 0.005 0.12 0.039 1.0 0.18 0.082 1180 5240 3000 13300
303K 0.6693 17 0.0003 0.008 1.8504 47 0.00045 0.011 0.551 14 0.005 0.12 0.039 1.0 0.24 0.109 1460 6550 3450 15300
304K 0.7874 20 0.0004 0.010 2.0472 52 0.0005 0.013 0.591 15 0.005 0.12 0.039 1.0 0.31 0.141 1760 7800 4050 17900
305K 0.9843 25 0.0004 0.010 2.4409 62 0.0005 0.013 0.669 17 0.005 0.12 0.039 1.0 0.52 0.236 2750 12200 6000 26600
306K 1.1811 30 0.0004 0.010 2.8346 72 0.0005 0.013 0.748 19 0.005 0.12 0.039 1.0 0.78 0.354 3550 15600 7650 33900
307K 1.3780 35 0.00045 0.012 3.1496 80 0.0005 0.013 0.827 21 0.005 0.12 0.059 1.5 1.04 0.472 4150 18400 8500 37700
308K 1.5748 40 0.00045 0.012 3.5433 90 0.0006 0.015 0.906 23 0.005 0.12 0.059 1.5 1.42 0.644 5850 25900 11400 50600
309K 1.7717 45 0.00045 0.012 3.9370 100 0.0006 0.015 0.984 25 0.005 0.12 0.059 1.5 1.9 0.862 7100 31500 13400 59500
310K 1.9685 50 0.00045 0.012 4.3307 110 0.0006 0.015 1.063 27 0.005 0.12 0.079 2.0 2.48 1.125 8500 37700 15600 69300
311K 2.1654 55 0.0006 0.015 4.7244 120 0.0006 0.015 1.142 29 0.006 0.15 0.079 2.0 3.14 1.424 10000 44400 18300 81200
312K 2.3622 60 0.0006 0.015 5.1181 130 0.0007 0.018 1.22 31 0.006 0.15 0.079 2.0 3.89 1.765 11600 51500 20800 92300
313K 2.5591 65 0.0006 0.015 5.5118 140 0.0007 0.018 1.299 33 0.006 0.15 0.079 2.0 4.78 2.168 13400 59500 23600 104000
314K 2.7559 70 0.0006 0.015 5.9055 150 0.0010 0.025 1.378 35 0.006 0.15 0.079 2.0 5.77 2.617 15300 67900 26000 116000
315K 2.9528 75 0.0006 0.015 6.2992 160 0.0007 0.018 1.457 37 0.006 0.15 0.079 2.0 7 3.175 17300 76800 29000 128000
316K 3.1496 80 0.0006 0.015 6.6929 170 0.0010 0.025 1.535 39 0.006 0.15 0.079 2.0 8.28 3.756 19300 85700 31500 139000
317K 3.3465 85 0.0008 0.020 7.0866 180 0.0010 0.025 1.614 41 0.008 0.20 0.098 2.5 11.04 5.008 21600 95900 34000 151000
318K 3.5433 90 0.0008 0.020 7.4803 190 0.0012 0.030 1.693 43 0.008 0.20 0.098 2.5 11.29 5.121 24000 106000 36500 162000
320K 3.9370 100 0.0008 0.020 8.4646 215 0.0012 0.030 1.8504 47 0.008 0.20 0.098 2.5 15.62 7.085 31500 139000 41500 195000
321K 4.1339 105 0.0008 0.020 8.8583 225 0.0012 0.030 1.9291 49 0.008 0.20 0.098 2.5 22.52 10.21 36500 163000 48000 126000
322K 4.3307 110 0.0008 0.020 9.4488 240 0.0012 0.030 1.9685 50 0.008 0.20 0.098 2.5 26.82 12.17 37500 166000 49000 220000
326K 5.1181 130 0.0010 0.020 11.0236 280 0.0014 0.035 2.3228 58 0.01 0.25 0.098 2.5 41.6 18.9 54000 240000 63000 280000
330K 5.9055 150 0.001 0.025 12.5984 320 0.0016 0.040 2.559 65 0.01 0.25 0.098 2.5 59.7 27.1 69500 310000 75000 335000
332K 6.2992 160 0.0010 0.025 13.3858 340 0.0016 0.040 2.677 68 0.01 0.25 0.098 2.5 69.4 31.5 69500 310000 75000 335000
334K 6.6929 170 0.0010 0.025 14.1732 360 0.0016 0.040 2.8346 72 0.01 0.25 0.098 2.5 81.1 36.8 80000 355000 81500 360000
336K 7.0866 180 0.0010 0.025 14.9606 380 0.0016 0.040 2.9528 75 0.01 0.25 0.098 2.5 92.6 42 88000 390000 88000 390000
338K 7.4803 190 0.0012 0.030 15.7480 400 0.0016 0.040 3.0709 78 0.012 0.30 0.16 4.0 105 47.6 98000 440000 95000 425000
340K 7.8740 200 0.0012 0.030 16.5354 420 0.0018 0.045 3.1496 80 0.012 0.30 0.16 4.0 123.6 56.1 104000 465000 95000 425000
342K 8.2677 210 0.0012 0.030 17.3228 440 0.0018 0.045 3.3071 84 0.012 0.30 0.16 4.0 128.2 58.1 129000 570000 114000 510000
344K 8.6614 220 0.0012 0.030 18.1102 460 0.0018 0.045 3.4646 88 0.012 0.30 0.16 4.0 154 69.8 137000 610000 116000 520000
348K 9.4488 240 0.0012 0.030 19.6850 500 0.0018 0.045 3.7402 95 0.012 0.30 0.16 4.0 178.9 81.1 163000 735000 134000 600000
352K 10.2362 260 0.0014 0.035 21.2598 540 0.0020 0.050 4.0157 102 0.014 0.35 0.16 4.0 217 98.4 190000 850000 150000 670000
356K 11.0236 280 0.0014 0.035 22.8346 580 0.0020 0.050 4.2520 108 0.014 0.35 0.16 4.0 315 142.8 176000 780000 134000 585000
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
30
One Two One One Shield Two Open One One Two O.D.
1
Shield Shields Seal And Seal Seals Type Seal Shield Shields
D DD P PD PP G PG DG DDG O.D. Thickness Offset
315KD 315KDD — — — — — — — — — — — — —
316KD 316KDD — — — — — — — — — — — — —
317KD 317KDD — — — — — — — — — — — — —
— — — — — — — — — — — — — — —
320KD 320KDD — — — — — — — — — — — — —
(1)
The snap ring is normally packaged separately in the box with the bearing
Note: “N” prefix indicates a non-removable seal in NP(P) designs.
31
DIMENSIONS – TOLERANCES
Bearing Bore Outside Width Fillet Wt. Static Extended
(1)
Number d Diameter C Radius Load Dynamic
D Rating Load
tolerance tolerance tolerance Co Rating
+0.0000" +0.0000" +0.000" CE
+0.000 mm +0.000 mm +0.00 mm
to minus to minus to minus
in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg lbs. N lbs. N
303W 0.6693 17 0.0003 0.008 1.8504 47 0.00045 0.011 0.551 14 0.005 0.12 0.039 1.0 0.26 0.118 2120 9400 4650 20600
304W 0.7874 20 0.0004 0.010 2.0472 52 0.0005 0.013 0.591 15 0.005 0.12 0.039 1.0 0.34 0.154 2550 11300 5400 23900
305W 0.9843 25 0.0004 0.010 2.4409 62 0.0005 0.013 0.669 17 0.005 0.12 0.039 1.0 0.57 0.259 3900 17300 7650 33900
306W 1.1811 30 0.0004 0.010 2.8346 72 0.0005 0.013 0.748 19 0.005 0.12 0.039 1.0 0.85 0.386 5100 22600 9650 42800
307W 1.3780 35 0.00045 0.012 3.1496 80 0.0005 0.013 0.827 21 0.005 0.12 0.059 1.5 1.13 0.513 6550 29000 11600 51500
308W 1.5748 40 0.00045 0.012 3.5433 90 0.0006 0.015 0.906 23 0.005 0.12 0.059 1.5 1.86 0.844 8000 39000 15000 66000
309W 1.7717 45 0.00045 0.012 3.9370 100 0.0006 0.015 0.984 25 0.005 0.12 0.059 1.5 2.06 0.934 10600 47000 17600 78100
310W 1.9685 50 0.00045 0.012 4.3307 110 0.0006 0.015 1.063 27 0.005 0.12 0.079 2.0 2.66 1.207 12700 56000 20800 92000
311W 2.1654 55 0.0006 0.015 4.7244 120 0.0006 0.015 1.142 29 0.006 0.15 0.079 2.0 3.40 1.542 15000 66000 24000 106000
312W 2.3622 60 0.0006 0.015 5.1181 130 0.0007 0.018 1.220 31 0.006 0.15 0.079 2.0 4.24 1.923 17600 78000 27500 122000
313W 2.5591 65 0.0006 0.015 5.5118 140 0.0007 0.018 1.299 33 0.006 0.15 0.079 2.0 5.32 2.413 21600 96000 32500 144000
314W 2.7559 70 0.0006 0.015 5.9055 150 0.0007 0.018 1.378 35 0.006 0.15 0.079 2.0 6.36 2.885 22800 101000 34500 153000
315W 2.9528 75 0.0006 0.015 6.2992 160 0.0010 0.025 1.457 37 0.006 0.15 0.079 2.0 7.71 3.497 28500 127000 40500 180000
316W 3.1496 80 0.0006 0.015 6.6929 170 0.0010 0.025 1.535 39 0.006 0.15 0.079 2.0 9.15 4.15 32000 142000 44000 195000
317W 3.3465 85 0.0008 0.020 7.0866 180 0.0010 0.025 1.614 41 0.008 0.20 0.098 2.5 10.74 4.872 35500 157000 47500 211000
318W 3.5433 90 0.0008 0.020 7.4803 190 0.0012 0.030 1.693 43 0.008 0.20 0.098 2.5 12.39 5.62 39000 173000 51000 226000
319W 3.7402 95 0.0008 0.02 7.8740 200 0.0012 0.030 1.772 45 0.008 0.20 0.098 2.5 14.36 6.514 43000 191000 54000 239000
320W 3.9370 100 0.0008 0.020 8.4646 215 0.0012 0.030 1.850 47 0.008 0.20 0.098 2.5 17.62 7.992 51000 226000 61000 270000
321W 4.1339 105 0.0008 0.020 8.8583 225 0.0012 0.030 1.929 49 0.008 0.20 0.098 2.5 20.1 9.117 55000 244000 64000 284000
322W 4.3307 110 0.0008 0.020 9.4488 240 0.0012 0.030 1.968 50 0.008 0.20 0.098 2.5 23.84 10.814 60000 266000 68000 302000
324W 4.7244 120 0.0008 0.020 10.2362 260 0.0014 0.035 2.165 55 0.008 0.20 0.098 2.5 33.1 15.014 64000 284000 72000 319000
326W 5.1181 130 0.0010 0.025 11.0236 280 0.0014 0.035 2.3228 58 0.010 0.25 0.098 2.5 43.12 19.56 73500 326000 80000 355000
328W 5.5118 140 0.0010 0.025 11.8110 300 0.0014 0.035 2.441 62 0.010 0.25 0.098 2.5 50.8 23 91500 410000 90000 400000
330W 5.9055 150 0.0010 0.025 12.5984 320 0.0016 0.040 2.559 65 0.010 0.25 0.098 2.5 59.1 26.808 95000 422000 95000 422000
336W 7.0866 180 0.0010 0.025 14.9606 380 0.0016 0.040 3.1102 79 0.010 0.25 0.098 2.5 105.07 47.66 132000 600000 118000 524000
338W 7.4803 190 0.0012 0.030 15.7480 400 0.0016 0.040 3.0709 78 0.012 0.30 0.160 4.0 108.4 49.2 160000 720000 129000 580000
340W 7.8740 200 0.0012 0.030 16.5354 420 0.0018 0.045 3.1496 80 0.012 0.30 0.160 4.0 126.6 57.4 163000 730000 127000 570000
342W 8.2677 210 0.0012 0.030 17.3228 440 0.0018 0.045 3.3071 84 0.012 0.30 0.160 4.0 133.7 60.6 208000 935000 160000 720000
344W 8.6614 220 0.0012 0.030 18.1102 460 0.0018 0.045 3.4646 88 0.012 0.30 0.160 4.0 158.8 72 196000 880000 150000 700000
348W 9.4488 240 0.0012 0.030 19.6850 500 0.0018 0.045 3.7402 95 0.012 0.30 0.160 4.0 187.2 84.9 260000 1200000 186000 850000
352W 10.2362 260 0.0014 0.035 21.2598 540 0.002 0.050 4.0157 102 0.014 0.35 0.160 4.0 227.7 103.3 310000 1400000 208000 950000
356W 11.0236 280 0.0014 0.035 22.8346 580 0.002 0.050 4.2520 108 0.014 0.35 0.160 4.0 323.3 146.6 300000 1350000 190000 855000
(1)
Maximum shaft or housing fillet radius which bearing corners will clear. For applications where thrust loads exceeds 60% Radial Load, consult Timken Enginering.
32
— — — — — — — — — — —
17
— — 304WG — — 2 ⁄64 57.5 0.042 1.07 0.136 3.45
21
305WD — 305WG — — 2 ⁄32 67.5 0.065 1.65 0.190 4.83
5
306WD 306WDD 306WG 306WDG — 3 ⁄64 78.2 0.065 1.65 0.190 4.83
13
307WD 307WDD 307WG 307WDG — 3 ⁄32 86.5 0.065 1.65 0.190 4.83
(2) 51
308WD 308WDD 308WG 308WDG — 3 ⁄64 96.4 0.095 2.41 0.220 5.59
3
309WD 309WDD 309WG 309WDG — 4 ⁄16 106.4 0.095 2.41 0.220 5.59
37
310WD 310WDD 310WG 310WDG 310WDDG 4 ⁄64 116.3 0.095 2.41 0.220 5.59
3
311WD 311WDD 311WG 311WDG — 5 ⁄32 129.4 0.109 2.77 0.265 6.73
(3) 1
312WD 312WDD 312WG 312WDG 312WDDG 5 ⁄2 139.7 0.109 2.77 0.265 6.73
57
313WD 313WDD 313WG 313WDG 313WDDG 5 ⁄64 149.6 0.109 2.77 0.297 7.54
314WD 314WDD — — — — — — — — —
315WD 315WDD — — — — — — — — —
3
316WD 316WDD 316WG — — 7 ⁄16 182.6 0.120 3.05 0.339 8.61
317WD 317WDD — — — — — — — — —
— — — — — — — — — — —
— — — — — — — — — — —
320WD — — — — — — — — — —
— — — — — — — — — — —
61
— — 322WG — — 9 ⁄64 252.8 0.120 3.05 0.339 8.61
(1)
The snap ring is normally packaged separately in the box with the bearing.
(2)
Also available as a GW type- filling slot and snap ring on same side. Also available 308GW2 with 20 mm width.
(3)
Also available as 312WG-3 with filling slot on same side as snap ring.
33
OFFSET
THICKNESS
O.D.
DIMENSIONS – TOLERANCES
Bearing Bore Outside Width Fillet Wt. Static Extended Snap Ring PPG
(1)
Number d Diameter C Radius Load Dynamic
D Rating Load
tolerance tolerance +0.000" Co Rating
Rubber Mechani- +0.0000" +0.0000" -.005" CE
Seal seal +0.000 mm +0.000 mm +0.00 mm
PP LL to minus to minus -0.12 mm O.D. thickness offset
in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg lbs. N lbs. N in. mm in. mm in. mm
W304PP — 0.7874 20 0.0004 0.010 2.0472 52 0.0005 0.013 0.875 22.22 0.039 1.0 0.47 0.213 1760 7800 4050 17900 — — — — — —
(2) 21
W305PP — 0.9843 25 0.0004 0.010 2.4409 62 0.0005 0.013 1.000 25.40 0.039 1.0 0.78 0.354 2750 12200 6000 26600 2 ⁄32 67.5 0.065 1.65 0.190 4.82
W306PP — 1.1811 30 0.0004 0.010 2.8346 72 0.0005 0.013 1.188 30.18 0.039 1.0 1.23 0.558 3550 15600 7650 33900 — — — — — —
W307PP W307KLL 1.3780 35 0.00045 0.012 3.1496 80 0.0005 0.013 1.375 34.92 0.059 1.5 1.72 0.780 4150 18400 8500 37700 — — — — — —
(2) (2) 51
W308PP W308KLL 1.5748 40 0.00045 0.012 3.5433 90 0.0006 0.015 1.438 36.53 0.059 1.5 2.25 1.021 5850 25900 11400 50600 3 ⁄64 96.4 0.095 2.41 0.220 5.59
W309PP W309KLL 1.7717 45 0.00045 0.012 3.9370 100 0.0006 0.015 1.562 39.67 0.059 1.5 3.02 1.370 7100 31500 13400 59000 — — — — — —
W310PP — 1.9685 50 0.00045 0.012 4.3307 110 0.0006 0.015 1.750 44.45 0.079 2.0 4.03 1.828 8500 37700 15600 69000 — — — — — —
(2) (3) 3
W311PP W311KLL 2.1654 55 0.0006 0.015 4.7244 120 0.0006 0.015 1.938 49.23 0.079 2.0 5.26 2.386 10000 44400 18300 81000 5 ⁄32 129.4 0.109 2.77 0.265 0.73
(2) (3) 1
W312PP W312KLL 2.3622 60 0.0006 0.015 5.1181 130 0.0007 0.018 2.125 53.98 0.079 2.0 6.73 3.053 11600 51500 20800 92000 5 ⁄2 139.7 0.109 2.77 0.265 0.73
(3)
W313PP — 2.5591 65 0.0006 0.015 5.5118 140 0.0007 0.018 2.312 58.72 0.079 2.0 8.56 3.883 13400 59500 23600 104000 — — — — — —
(3)
W314PP — 2.7559 70 0.0006 0.015 5.9055 150 0.0007 0.018 2.500 63.50 0.079 2.0 10.43 4.731 15300 67000 26000 116000 — — — — — —
(3)
W315PP — 2.9528 75 0.0006 0.015 6.2992 160 0.0010 0.025 2.688 68.28 0.079 2.0 12.81 5.811 17300 76000 29000 128000 — — — — — —
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
(2)
Also available with snap ring. To order, add suffix “G” to bearing number. Example: W305PPG.
The snap ring is normally packaged separately in the box with the bearing.
(3)
Width tolerance is .000" to -.006" (.00mm to -.15mm).
34
Non-Relubricatable Type
Cylindrical O.D.
Tri-Ply Seal ball bearings are designed for environments where severe
contamination is present such as agricultural tillage equipment. The one-
piece Tri-Ply Seals incorporate a highly effective seal design molded to
d D d D
an exterior shroud cap to provide exceptionally effective protection
against the loss of lubricant and the entrance of wet or abrasive contami-
nants. A seven piece Tri-Ply construction is standard on certain sizes.
The shroud cap nests closely with the outside seal and helps protect the
rubber seal members from wrappage and abrasion.
A feature of these bearings is their balanced design identified by deep
races, large balls and extra wide or heavy, shock-resistant inner and outer
rings. The use of Tri-Ply Seal bearings simplifies housing designs, and
their extra inner ring width provides greater support on the shaft. For
speeds in excess of 500 RPM, consult Timken Engineering.
B
1
B
Type 1 Type 2
in. mm in. mm in. mm in. mm in. mm in. mm No. size lbs. kg lbs. N lbs. N
1
W208PP10 1-1 1.5005 38.113 0.0005 0.013 3.1496 80 0.0005 0.013 1.688 42.87 0.827 21.00 9 ⁄2 1.5 0.680 4500 19900 8300 36800
1
W210PP8 2- 1.5300 38.860 0.0100 0.250 3.5433 90 0.0006 0.015 1.188 30.18 1.188 30.18 10 ⁄2 1.97 0.894 5200 23000 9000 39900
1
W210PP2 2- 1.9380 49.230 0.0005 0.013 3.5433 90 0.0006 0.015 1.188 30.18 1.188 30.18 10 ⁄2 1.69 0.767 5200 23000 9000 39900
(1) 9
W211PP2 2-2 2.1880 55.580 0.0006 0.015 3.9370 100 0.0006 0.015 1.312 33.34 1.312 33.34 10 ⁄16 2.33 1.056 6550 29000 11000 48800
(1) 11
W214PP2 2- 2.7559 70.000 0.0006 0.015 4.9213 125 0.0008 0.020 1.562 39.69 1.562 39.69 10 ⁄16 4.19 1.901 9800 43500 16000 71000
(1) 1
W315PP2 2- 3.0056 76.342 0.0006 0.015 6.2992 160 0.0010 0.025 2.688 68.26 2.688 68.26 8 1 ⁄16 13.13 5.956 17300 76800 29000 128000
(1)
Inner and outer width tolerance is .000" to .006" (.00mm to -.15mm)
SQUARE BORE
Bearing Type-Fig. Shaft Size Outside Diameter Ring Width Balls Wt. Static Extended
Number D +0.000",-0.005" Load Dynamic
+0.00,-.12 mm Rating Load
tolerance CO Rating
+0.0000" CE
+0.000 mm B C
to minus Inner Outer No. Size
35
Non-Relubricatable Type
Spherical O.D.
These Tri-Ply Seal bearings are similar in design and features to
those shown on page 35 except for a spherical O.D.
d D d D
B
B
Figure 1 Figure 2 Figure 3 Type 1 Type 2
ROUND BORE
Bearing Type-Fig. Bore Outside Diameter Ring Width Balls Stamping Wt. Static Extended
Number d D +0.000",-0.005" Size Load Dynamic
+0.00,-.12 mm Rating Load
tolerance tolerance CO Rating
+0.0000" +0.0000" CE
+0.000 mm +0.000 mm B C
to minus to minus Inner Outer No. Size
in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbs. N lbs. N
1
W208PPB7 1–1 1.1880 30.170 0.0005 0.013 3.150 80 0.0005 0.013 1.188 30.18 0.709 18.00 9 ⁄2 80MS 1.41 0.64 4500 19900 8300 36800
1
W208PPB2 1– 1.5005 38.113 0.0005 0.013 3.150 80 0.0005 0.013 1.688 42.96 0.709 18.00 9 ⁄2 80MS 1.59 0.721 4500 19900 8300 36800
15
W208PPB23 1–1 1.5005 38.113 0.0005 0.013 3.150 80 0.0005 0.013 1.688 42.96 1.188 30.18 9 ⁄32 80MS 1.5 0.68 3550 15600 7200 32000
1
W209PPB2 2–2 1.7717 45.000 0.0005 0.013 3.346 85 0.0006 0.015 1.188 30.18 1.188 30.18 9 ⁄2 85MS 1.44 0.653 4550 20200 8300 36800
1
W209PPB4 2–2 1.5350 39.000 0.0100 0.250 3.346 85 0.0006 0.015 1.188 30.18 1.188 30.18 9 ⁄2 85MS 1.65 0.748 4550 20200 8300 36800
1
W210PPB2 2– 1.9380 49.230 0.0005 0.013 3.543 90 0.0006 0.015 1.188 30.18 1.188 30.18 10 ⁄2 90MS 1.56 0.708 5200 23000 9000 39900
1
W210PPB5 2– 1.7850 45.340 0.0100 0.250 3.543 90 0.0006 0.015 1.188 30.18 1.188 30.18 10 ⁄2 90MS 1.75 0.794 5200 23000 9000 39900
(1) 9
W211PPB2 2–2 2.1880 55.580 0.0006 0.015 3.937 100 0.0006 0.015 1.312 33.34 1.312 33.34 10 ⁄16 100MS 3.63 0.966 6550 29000 11000 48800
(1) 11
W214PPB2 2– 2.7559 70.000 0.0006 0.015 4.921 125 0.0008 0.020 1.562 39.69 1.562 39.69 10 ⁄16 — 3.96 1.796 9800 43500 16000 71000
(1) 11
W214PPB9 1– 2.7660 70.260 0.0010 0.025 4.921 125 0.0008 0.020 1.750 44.45 1.102 28.00 10 ⁄16 — 3.96 1.796 9800 43500 16000 71000
(1)
Inner and outer width tolerance is .000" to -.006" (.00mm to -.15mm)
SQUARE BORE
Bearing Type-Fig. Shaft Size Outside Diameter Ring Width Balls Stamping Wt. Static Extended
Number D +0.000",-0.005" Size Load Dynamic
+0.00,-.12 mm Rating Load
tolerance CO Rating
+0.0000" CE
+0.000 mm B C
to minus Inner Outer No. Size
36
Relubricatable Type
These Tri-Ply Seal bearings are similar in design and features to those
d D
shown on the preceding two pages and have a provision for relubrication.
B B B B
ROUND BORE
Bearing Type- Bore Outside Diameter Ring Width Balls L Wt. Static Extended
Number Fig. d D +0.000,-.005" Load Dynamic
tolerance tolerance +0.00,-0.12 mm Rating Load
+0.0000" +0.0000" CO Rating
+0.000 mm +0.000 mm B C CE
in. mm
to minus
in. mm in. mm
to minus
in. mm
Inner
in. mm in.
Outer
mm
No. size
Shaft Size
SQUARE BORE in. mm
1
GW208PPB6 2–1 1 25.4 3.1496 80 0.0005 0.013 1.438 36.53 0.827 21.00 9 ⁄2 0.223 5.66 1.75 0.794 4500 19900 8300 36800
1 1
GW208PPB5 2–1 1 ⁄8 28.6 3.1496 80 0.0005 0.013 1.438 36.53 0.827 21.00 9 ⁄2 0.223 5.66 1.47 0.667 4500 19900 8300 36800
1 1
GW208PPB8 1–1 1 ⁄8 28.6 3.1496 80 0.0005 0.013 1.438 36.53 1.188 30.18 9 ⁄2 0.329 8.36 1.75 0.794 4500 19900 8300 36800
1 1
GW208PPB17 3–1 1 ⁄8 28.6 3.3755 85.738 0.0005 0.013 1.438 36.53 1.188 30.18 9 ⁄2 0.326 8.28 20.4 0.925 4500 19900 8300 36800
1 1
GW209PPB5 1–2 1 ⁄4 31.8 3.3456 85 0.0006 0.015 1.438 36.53 1.188 30.18 9 ⁄2 0.346 8.79 1.75 0.794 4550 20200 8300 36800
1 1
GW209PPB8 2–2 1 ⁄4 31.8 3.3456 85 0.0006 0.015 1.438 36.53 0.866 22.00 9 ⁄2 0.179 4.55 1.65 0.748 4550 20200 8300 36800
1 1
GW210PP4 3– 1 ⁄8 28.6 3.5433 90 0.0006 0.015 1.188 30.18 1.188 30.18 10 ⁄2 0.355 9.02 2.31 1.048 5200 23000 9000 39900
1 1
GW210PPB4 4– 1 ⁄8 28.6 3.5433 90 0.0006 0.015 1.188 30.18 1.188 30.18 10 ⁄2 0.355 9.02 1.75 0.794 5200 23000 9000 39900
1 (2) 9
GW211PP3 3–2 1 ⁄2 38.1 3.9370 100 0.0006 0.015 1.312 33.34 1.312 33.34 10 ⁄16 0.392 9.96 2.79 1.266 6550 29000 11000 48800
1 (2) 9
GW211PPB3 4–2 1 ⁄2 38.1 3.9370 100 0.0006 0.015 1.312 33.34 1.312 33.34 10 ⁄16 0.392 9.96 2.66 1.207 6550 29000 11000 48800
1 (2) 9
GW211PP17 3–2 1 ⁄2 38.1 3.9370 100 0.0006 0.015 1.75 44.45 1.312 33.34 10 ⁄16 0.392 9.96 2.62 1.188 6550 29000 11000 48800
(2) 11
GW214PPB4 4– 2 50.8 4.9213 125 0.0008 0.020 1.562 39.69 1.562 39.69 10 ⁄16 0.414 10.52 4.75 2.155 9800 43500 16000 71000
3 (2) 23
GW216PPB4 2–3 1 ⁄4 44.4 5.5118 140 0.0008 0.020 2.5 63.50 1.181 30.00 11 ⁄32 0.240 6.1 — — 12200 54000 18300 81000
(1) 1 (2) 23
GW216PP2 2–3 2 ⁄4 57.2 5.5118 140 0.0008 0.020 2.5 63.50 1.181 30.00 11 ⁄32 0.240 6.1 — — 12200 54000 18300 81000
1 (2) 23
GW216PPB2 2–3 2 ⁄4 57.2 5.5118 140 0.0008 0.020 2.5 63.50 1.181 30.00 11 ⁄32 0.240 6.1 — — 12200 54000 18300 81000
(1) (2)
Cylindrical O.D. Inner and outer width tolerance is .000" to –.006" (.00mm to-.15mm).
37
Tri-Ply Series B
209 SERIES
Unit Shaft B H2 J N1 N L G H A A1 Static Extended
Number Diam. Ref. Load Dynamic
Rating Load
Co Rating
CE
in. in. in. in. in. in. in. in. in. in. in. lbs lbs
1 1 11 21 17 23 43 17
DHU 1 ⁄2 R–209 1 ⁄2 RD. 1 ⁄16 4 5 ⁄32 ⁄32 5 2.279 2 ⁄64 1 ⁄64 ⁄64 4000 8150
1 1 11 21 17 23 43 17
DHU 1 ⁄8 S–209 1 ⁄8 SQ. 1 ⁄16 4 5 ⁄32 ⁄32 5 2.279 2 ⁄64 1 ⁄64 ⁄64 4000 8150
3 3 11 21 17 23 43 17
DHU 1 ⁄4 R–209 1 ⁄4 RD. 1 ⁄16 4 5 ⁄32 ⁄32 5 2.279 2 ⁄64 1 ⁄64 ⁄64 4000 8150
1 1 3 21 17 23 43 17
DHU 1 ⁄4S–209 1 ⁄4 SQ. 1 ⁄4 4 5 ⁄32 ⁄32 5 2.279 2 ⁄64 1 ⁄64 ⁄64 4000 8150
3 3 21 17 23 43 17
DHU 491 A 1 ⁄4 RD. 1 ⁄4 4 5 ⁄32 ⁄32 5 2.279 2 ⁄64 1 ⁄64 ⁄64 4000 8150
211 SERIES
1 1 1 19 17 1 7 15 19
DHU 1 ⁄2 S–211 1 ⁄2 SQ. 2 4 5 ⁄2 ⁄32 ⁄32 5 ⁄2 2.746 2 ⁄8 1 ⁄16 ⁄64 5600 10800
3 3 1 1 19 17 1 7 15 19
DHU 1 ⁄4 R–211 1 ⁄4 RD. 2 ⁄8 4 5 ⁄2 ⁄32 ⁄32 5 ⁄2 2.746 2 ⁄8 1 ⁄16 ⁄64 5600 10800
3 3 3 1 19 17 1 7 15 19
DHU 2 ⁄16 R–211 2 ⁄16 RD. 2 ⁄16 4 5 ⁄2 ⁄32 ⁄32 5 ⁄2 2.746 2 ⁄8 1 ⁄16 ⁄64 5600 10800
mm mm mm mm mm mm mm mm mm mm mm N N
DHU 30S–209 30 SQ. 43 101.6 127 16.7 13.5 127 57.9 59.9 42.5 6.7 18000 36500
DHU 40R–209 40 SQ. 43 101.6 127 16.7 13.5 127 57.9 59.9 42.5 6.7 18000 36500
DHU 45R–209 45 RD. 43 101.6 127 16.7 13.5 127 57.9 59.9 42.5 6.7 18000 36500
DHU 50R–211 50 RD. 51 113.5 139.7 15.1 13.5 139.7 69.7 73 49.2 7.5 25000 48000
DHU 55R–211 55 RD. 51 113.5 139.7 15.1 13.5 139.7 69.7 73 49.2 7.5 25000 48000
38
G G G G A
C C C C
F
d D d
B B B B
1
Type 1 Type 2 Type 3 Type 4
Bearing Type Hex Hex Bore Outside Diameter Width F G Balls Wt Static Extended
Number Shaft A d D Load Dynamic
Size tolerance tolerance +0.0000 -0.005" Rating Load
+0.000" Across +0.0000" +0.000 mm -0.12 mm CO Rating
Across -0.00 mm corners +0.000 mm C B CE
Flats to plus min. to minus Outer Inner No. size
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. lbs. kg lbs. N lbs. N
NON-RELUBRICATABLE TYPE
9 7
202KRR3 1 ⁄16 0.563 14.30 0.005 0.13 0.648 16.46 1.3780 35 0.0005 .013 0.433 11 0.512 13 — — — — 8 ⁄32 0.12 0.054 1000 4400 2360 10600
11 5
204KRR2 1 ⁄16 0.695 17.65 0.005 0.13 0.796 20.22 1.8504 47 0.0005 .013 0.551 14 0.825 20.96 — — — — 8 ⁄16 0.32 0.145 1400 6200 3200 14300
7 5
205KRR2 1 ⁄8 0.876 22.25 0.005 0.13 1.010 25.65 2.0472 52 0.0005 .013 0.591 15 1.000 25.4 — — — — 9 ⁄16 0.44 0.2 1560 6950 3450 15600
7 5
205KRRB2 2 ⁄8 0.876 22.25 0.005 0.13 1.010 25.65 2.0472 52 0.0005 .013 0.591 15 1.000 25.4 — — — — 9 ⁄16 0.44 0.2 1560 6950 3450 15600
(1) 7 5
205PPB13 2 ⁄8 0.876 22.25 0.005 0.13 1.010 25.65 2.0472 52 0.0005 .013 0.591 15 1.000 25.4 1.680 42.67 0.795 20.19 9 ⁄16 0.44 0.2 1560 6950 3450 15600
(1) 3
206KPP3 1 1 1.001 25.43 0.005 0.13 1.154 29.31 2.4409 62 0.0005 .013 0.630 16 0.945 24 2.050 52.07 0.770 19.56 9 ⁄8 0.76 0.345 2280 10000 4800 21600
(1) 3
206KPPB3 2 1 1.001 25.43 0.005 0.13 1.154 29.31 2.4409 62 0.0005 .013 0.630 16 0.945 24 2.050 52.07 0.770 19.56 9 ⁄8 0.76 0.345 2280 10000 4800 21600
3
206KRR6 1 1 1.001 25.43 0.005 0.13 1.154 29.31 2.4409 62 0.0005 .013 0.630 16 0.945 24 2.050 52.07 0.770 19.56 9 ⁄8 0.75 0.34 2280 10000 4800 21600
3
206KRRB6 2 1 1.001 25.43 0.005 0.13 1.154 29.31 2.4409 62 0.0005 .013 0.630 16 0.945 24 2.050 52.07 0.770 19.56 9 ⁄8 0.75 0.34 2280 10000 4800 21600
1 7
207KPP3 1 1 ⁄4 1.251 31.77 0.005 0.13 1.433 36.40 2.8346 72 0.0005 .013 0.669 17 1.484 37.7 2.376 60.35 0.775 19.68 9 ⁄16 1 0.454 3050 13700 6400 28500
1 7
207KPPB3 2 1 ⁄4 1.251 31.77 0.005 0.13 1.433 36.40 2.8346 72 0.0005 .013 0.669 17 0.984 25 2.376 60.35 0.775 19.68 9 ⁄16 0.87 0.395 3050 13700 6400 28500
1 7
207KRRB9 2 1 ⁄8 1.126 28.60 0.005 0.13 1.298 32.97 2.8346 72 0.0005 .013 0.669 17 1.484 37.7 2.376 60.35 0.775 19.68 9 ⁄16 1 0.454 3050 13700 6400 28500
1 7
207KRRB12 2 1 ⁄8 1.126 28.60 0.005 0.13 1.298 32.97 2.8346 72 0.0005 .013 0.669 17 0.984 25 2.376 60.35 0.775 19.68 9 ⁄16 0.87 0.395 3050 13700 6400 28500
1 7
207KRR17 1 1 ⁄4 1.251 31.77 0.005 0.13 1.443 36.65 2.8346 72 0.0005 .013 0.669 17 0.984 25 2.376 60.35 0.775 19.68 9 ⁄16 0.87 0.395 3050 13700 6400 28500
1 7
207KRRB17 2 1 ⁄4 1.251 31.77 0.005 0.13 1.443 36.65 2.8346 72 0.0005 .013 0.669 17 0.984 25 2.376 60.35 0.775 19.68 9 ⁄16 0.87 0.395 3050 13700 6400 28500
(1) 1 1
W208PPB16 2 1 ⁄4 1.251 31.77 0.005 0.13 1.443 36.65 3.1496 80 0.0005 .013 0.709 18 1.438 36.53 2.694 68.43 0.995 25.27 9 ⁄2 1.45 0.658 4000 17600 8150 36000
3 1
W208KRRB6 2 1 ⁄8 1.376 34.95 0.005 0.13 1.587 40.30 3.1496 80 0.0005 .013 0.827 21 1.438 36.53 2.694 68.43 0.927 23.54 9 ⁄2 — — 4000 17600 8150 36000
1 1
W208KRR8 1 1 ⁄4 1.251 31.77 0.005 0.13 1.443 36.65 3.1496 80 0.0005 .013 0.709 18 1.438 36.53 2.694 68.43 0.805 20.45 9 ⁄2 1.45 0.658 4000 17600 8150 36000
1 1
209KRRB2 2 1 ⁄2 1.501 38.12 0.005 0.13 1.732 43.99 3.3456 85 0.0006 0.015 0.748 19 1.181 30 2.908 73.86 0.916 23.27 9 ⁄2 1.27 0.576 4000 17600 8150 36000
(1) 5 1
W210PPB7 2 1 ⁄8 1.626 41.30 0.005 0.13 1.876 47.65 3.5433 90 0.0006 0.015 1.188 30.18 1.188 30.18 — — — — 10 ⁄2 1.75 0.794 4500 19600 8800 39000
RELUBRICATABLE TYPE
(1) 3
G206KPP4 3 1 1.001 25.43 0.005 0.13 1.152 29.26 2.4409 62 0.005 0.13 0.709 18 0.945 24 — — — — 9 ⁄8 0.62 0.281 2280 10000 4800 21600
(1) 3
G206KPPB4 4 1 1.001 25.43 0.005 0.13 1.152 29.26 2.4409 62 0.005 0.13 0.709 18 0.945 24 2.050 52.07 0.770 19.56 9 ⁄8 0.61 0.277 2280 10000 4800 21600
3
G206KRRB6 4 1 1.001 25.43 0.005 0.13 1.152 29.26 2.4409 62 0.005 0.13 0.709 18 0.945 24 2.050 52.07 0.770 19.56 9 ⁄8 0.59 0.268 2280 10000 4800 21600
(1) 1 7
G207KPPB2 4 1 ⁄8 1.126 28.60 0.005 0.13 1.298 32.97 2.8346 72 0.005 0.13 0.748 19 1.484 37.7 2.375 60.32 1.000 25.40 9 ⁄16 1 0.454 3050 13700 6400 28500
1 1
GW208KRRB5 4 1 ⁄4 1.251 31.77 0.005 0.13 1.443 36.65 3.1496 80 0.005 0.13 0.827 21 1.438 36.51 2.694 60.35 0.883 22.43 9 ⁄2 1.4 0.635 4000 17600 8150 36000
(1) 1 1
GW208PPB22 2 1 ⁄4 1.255 31.88 0.005 0.13 1.447 36.75 3.1496 80 0.005 0.13 0.827 21 1.438 36.51 2.050 52.07 1.115 28.32 9 ⁄2 1.5 0.68 4000 17600 8150 36000
(1) 3 (2) 9
GC1200KPPB2 1 ⁄4 1.751 44.48 0.005 0.13 2.020 51.31 3.9370 100 0.0006 0.015 0.984 25 2.250 57.15 3.390 86.11 1.142 29.01 10 ⁄16 3.35 1.52 4500 19600 8800 39000
(1)
Tri-Ply Seal bearing.
(2)
Inner and outer ring tolerance is .000" to -.006" (.00mm to -15mm).
39
D
d F F
K F K
K
B B B
Type 1 Type 2 Type 3
in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. N lbs. N
203KR2 3 0.6253 15.883 0.0003 0.008 1.5748 40 0.0005 0.013 0.551 14.00 0.472 12 — — — — — — 0.024 0.6 0.962 24.44 1060 4700 2450 10900
203KRR2 1 0.6400 16.256 0.0050 0.130 1.5748 40 0.0005 0.013 0.720 18.29 0.472 12 — — — — — — 0.024 0.6 0.962 24.44 1060 4700 2450 10900
203KRR5 1 0.5150 13.081 0.0050 0.130 1.5748 40 0.0005 0.013 0.720 18.29 0.472 12 — — — — — — 0.024 0.6 0.962 24.44 1060 4700 2450 10900
203KRR7 1 0.6693 17 0.0003 0.008 1.5748 40 0.0005 0.013 0.654 16.61 0.472 12 — — — — — — 0.024 0.6 0.962 24.44 1060 4700 2450 10900
204KR2 3 0.7505 19.063 0.0005 0.013 1.7805 45.225 0.0005 0.013 0.610 15.49 0.61 15.49 — — — — — — 0.039 1 1.131 28.73 1460 6500 3250 14400
204KRR3 1 0.7874 20 0.0004 0.010 1.8504 47 0.0005 0.013 0.699 17.75 0.551 14 — — — — — — 0.039 1 1.131 28.73 1460 6500 3250 14400
205KR4 2 1.0005 25.413 0.0005 0.013 2.0472 52 0.0005 0.013 1.000 25.40 0.591 15 0.625 15.875 — — 1.68 42.67 0.039 1 1.331 33.81 1760 7800 3600 16000
206KR7 2 1.1811 30 0.0004 0.010 2.4409 62 0.0005 0.013 0.945 24.00 0.63 16 0.700 17.78 — — 2.05 52.07 0.039 1 1.586 40.28 2550 11300 4900 21800
206KRR8 1 1.1811 30 0.0004 0.010 2.4409 62 0.0005 0.013 0.945 24.00 0.63 16 — — 0.77 19.56 2.05 52.07 0.039 1 1.539 39.09 2250 11300 4900 21800
207KRR 1 1.3780 35 0.0005 0.013 2.8346 72 0.0005 0.013 0.984 25.00 0.669 17 — — 0.775 19.68 2.376 60.35 0.039 1 1.848 46.94 3450 15000 6550 29000
208KRR2 1 1.5748 40 0.0005 0.013 3.1496 80 0.0005 0.013 1.063 27.00 0.827 21 — — 0.839 21.31 2.695 68.45 0.039 1 2.057 52.25 4500 20000 8300 36900
209KRR3 1 1.7717 45 0.0005 0.013 3.3465 85 0.0005 0.013 1.063 27.00 0.827 21 — — 0.952 24.18 2.851 72.42 0.039 1 2.279 57.89 4550 20000 8300 36900
210KRR 1 1.9685 50 0.0005 0.013 3.5433 90 0.0006 0.015 1.181 30.00 0.787 20 — — 0.946 24.03 3.055 77.6 0.039 1 2.473 62.81 5200 32100 9000 40000
212KRR 1 2.3622 60 0.0006 0.015 4.3307 110 0.0006 0.015 1.417 36.00(2) 0.886 22 — — 1.182 30.02 3.932 99.87 0.039 1 3.01 76.45 8000 35500 13200 58600
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
(2)
Inner and outer width tolerance is .000" to .0006" (.00mm to -.15mm).
40
Bearing Number
.720"
.715"
18.288 Bearing Number
.610"
.605"
1
18.161 15.490
203KRR6 204RR7 15.370
.4724"
.4674"
Special Features 12.000 Special Features
11.872
■ 5⁄8 in. Bore ■ 3⁄4 in. Bore
■ 47 mm O.D. ■ 1.7805 in. O.D.
■ Thick outer ring ■ Replaces 204KRNP3
1.8504"
Typical Applications 1.8499" Typical Applications 1.7805"
47.000
1.7800"
Idler Pulley 46.987 Rolling Cultivator 45.225
45.212
Idler Sprocket Disk
.640"
.635"
16.26 .755"
16.13 .750"
19.18
19.05
.700"
Bearing Number .735" Bearing Number .695"
17.78
.730"
204RY2 18.67 205KP6 17.65
18.54
.281"
Special Features .610" Special Features 7.14
.605" REF.
■ 5⁄8 in. Bore 15.49 ■ 3⁄4 in. Bore
15.37
■ Gothic Arch Race ■ Tri-Ply Seal on one side
with shroud cap
Typical Applications 2.0472"
1.7805" 2.0467"
Planter 1.7800" Typical Applications 52.000
45.220 51.986
Double Disk Opener 45.210 Rolling Cultivator
.921"
.916"
.631" 23.390 .756"
.626" 23.270 .751"
16.030 19.200
15.900 19.080
41
.515" 1.4380"
.510" 1.4375"
13.080 36.525
12.950
36.512
.9449" 1.4375"
Bearing Number .9399" Bearing Number 1.4325"
36.512
24.000
206KP2 23.873 208PPB12 36.386
.6299" 1.1880"
1.1830"
Special Features .6249"
16.000
Special Features 30.175
30.048
■ Tri-Ply Seal on one side 15.872
■ 11⁄8 in. Square Bore
with shroud cap ■ Molded Tri-Ply seal
■ Heavy outer ring
Typical Applications
3.3760"
Combine Typical Applications 3.3750"
85.750
2.4409"
2.4404"
Disk Harrow 85.725
62.000
61.986
3.443"
3.433"
87.450 1.185"
1.1811" 87.200 1.175"
1.1807"
30.10
30.000 29.84
29.990 SQUARE
1.750"
.9843" 1.745"
Bearing Number .9793" Bearing Number 44.45
25.000 44.32
207KRR14 24.874 W211PPB6 1.438"
.6693" 1.433"
Special Features .6643"
17.000
Special Features 36.53
36.40
■ 11⁄4 in. Bore 16.873 ■ 11⁄2 in. Square Bore
■ Tri-Ply seal with shroud cap
Typical Applications ■ Heavy outer ring
Disk Harrow
Transport Wheel Typical Applications 4.077"
2.8346" 4.076"
2.8341" Disk Harrow 103.560
72.000 103.530
71.986
4.130"
4.120"
104.90 1.536"
1.2530"
104.65 1.526"
1.2525"
31.826 39.010
31.814 38.760
SQUARE
.9843"
.9793"
Bearing Number 25.000 Bearing Number 2.016"
51.21
24.874
207KYY .6693"
G1104KRXB2
.6643" .7480"
.7430" .672"
17.000
Special Features 19.000 17.07
16.873 Special Features 18.872
■ Molded double lip seal
■ Oil Seal on one side
Typical Applications Typical Applications
Disk Harrow Chain Case
Transport Wheel 2.8346"
2.8341"
2.8346"
72.000
2.8341"
71.986
72.000
71.986
SPHERICAL
1.3780" 1.484" 1.2505" 2.109" DIA.
1.3775" 37.690 1.2500" 53.59
35.000 31.763
34.988 31.750
42
Special Bearings
Typical Major OEM
Size Special Features Application User Size Special Features Typical Application Major OEM User
5
200KRR3 Inner Ring Width .6457/.6407 Windrower Lockwood 205PP12 ⁄8" Bore Inner Width 1.500/ Cone Roller, Beet and Lockwood
One piece molded seals 1.495 Tri-Ply Seals Potato Harvester
7
J202KRR8 Extended Inner Width .880/.875 Tobacco Harvester Harrington 205PP13 ⁄8" Hex Bore Inner Width 1.000/ Corn Head Mechanism Allis Chalmers
1 3 .995 Tri-Ply Seals
202NPP9 ⁄2" Bore-O.D. corner turned to ⁄4" Baler Cam Foller Gehl
radius 206KRD Offset Rings Combine John Deere
Inner Width .748/.743
P202NPP11 Extra Wide Inner .5669/.5619 Cam Follower Harrington
Outer Width .6299/.6249
Bore 16mm .6299/.6296
“R” Seal on extended inner side
5
P203KRR3 ⁄8" Bore 2" O.D. Heavy section Cam Follower Guide New Holland
206KP2 Tri-Ply Seal one side Wide Inner Combine John Deere
outer ring Rolls for Baler Plunger
Ring .9449/.9399
5
203KRR6 ⁄8" Bore 47mm O.D.Heavy Baler Pick-up Vermeer
206KPP2 Tri-Ply Seals Wide Inner Ring Forrage Harvester Hesston
section outer ring
.9449/.9399
5
203NPP9 ⁄8" Bore .500" width Disk Grain Drill Opener John Deere 3
H206KRP2 ⁄4" Bore Wide Inner Ring .9449/ Disk Hiller and Bedders Cole
P203PP10 .6255/.6260" Bore Light Duty Disk
Applications
Kenneco A1391
206KPPB3
.9399 Extended on “R” seal side
P204KRRB5 Bore .793/.788 Inner Width Row Crop Machine New Holland
207KRR3 Large Inner Ring Bore Corner to Trencher Charles Machine
.6988/.6938
clear .090 R Shaft Fillet
204RR6 Ground Bore .7505/.7500 Width Planter Guage Wheels John Deere
207KRR8 Large Inner Ring Bore Corner to Baler Hesston
E8728 .610 O.D. 1.7805 Extra loose
clear .090 R Shaft Fillet Narrow
radial play. Replaces 204KRNP2
Inner .8499/.8399"
E8728
P207KRRB10 11⁄4 Bore Flare out type “R” Seal Corn Picker Snapping John Deere
P204RR6 Same as above except standard Garden Tractor Mower John Deere
with Shroud Cap Rolls
radial play. Replaces 204KRNP2 Spindle
207KRR12 11⁄8" Hex Bore Forage Harvester John Deere
H204KRNP6 Bore, O.D., Width same as Planter White
P204KR2 P207KRNPB13 Bore 1.2505/1.2500 Extended Corn Picker Gathering Avco New Idea
3 Inner 1.000/.945 on R Seal Side Chain
204RR7 ⁄4" Bore 1.7805 O.D. .610 Width Rolling Cultivator Disk Lilliston
E8728 Extra loose radial play. Replaces Sprockets, Pulleys and 207KRR14 Bore 1.2530/1.2525 Disk Harrow Transport John Deere
204KRNP2 E8728 Disk Opener Wheel
207KYY Double Lip Seal Disk Harrow Transport John Deere
205NPP2 Inner Width .6594/.6544 Miscellaneous John Deere
Wheel
3
205KR3 ⁄4" Bore , Special Races, Heavy Disk Hiller Planter and IHC P208KRR4 Bore 1.5312/1.5307 Large Inner Clutch Shaft Allis Chalmers
“R” Seal with Shroud Cap Cotton Picker A1849 Ring Bore Corner to clear .090R
3
⁄4" Bore Tri-Ply seal on one side Shaft Fillet
205KP6 Rolling Cultivator Lilliston
with shroud cap Coulter Bearing 208NPPB5 Bore 1.4380/1.4375 Plya Seals Crank Pin for Square New Holland
1
⁄2" Bore extended inner ring with Shroud Cap Baler
205KRR6 Windrow Digger Lockwood
1
⁄2" Bore 1.500/1.495 Extended 209KRRB2 1" Hex Bore Round Baler New Holland
205KRR7 Cone Roller Beet and Lockwood
Inner Ring with Offset race Potato Harvester 304KR2 Offset Inner Ring with .7087/ Tractor Water Pump J.I. Case
15
⁄16" Bore Tri-Ply Seals 1.375/ .7037 Width
205PPB7 Rolling Cultivator Lilliston
FS544 1.3760 Inner Width BB9105KRR2 1" Bore Inner Extended on one Hay Rake New Holland
7
⁄8" Hex Bore, One “R” Seal and side with 1.000/.995 Width Two
G205KPRB11 Corn Head Mechanism Gehl
one Tri-Ply Seal Inner Width 17/64 dia. holes in Inner Ring
1.000/.975 180° apart
3
⁄4" Bore Inner Width 1.3750/ Cultivator Kelley 9113KDD3 Cap Extends Past Inner Face on PTO Drive John Deere
205PP9
1.3700 Tri-Ply Seals FS264C one side
FS544
5
⁄8" Bore Inner Width 1.375/1.370 9114KDD3 Cap Extends Past Inner Face on PTO Drive John Deere
205PP10 Potato Harvester FMC
Tri-Ply Seals FS264C one side
1" Bore Inner Width 1.187/1.185 9117K3 Bore 3.2500/3.2492 PTO Drive John Deere
205PP11 Marker Wheel Roll-A-Cone
Tri-Ply Seals O.D. 5.000/4.9992
43
XLS44K 2.7500 69.850 0.0006 0.015 4.1250 104.775 0.0006 0.015 0.6875 17.460 0.005 0.13 0.047 1.2 0.99 0.449 4900 22000 6400 28500
XLS48K2 3.0000 76.200 0.0006 0.015 4.5000 114.300 0.0006 0.015 0.7500 19.050 0.005 0.13 0.047 1.2 1.25 0.567 7500 33500 9800 44000
XLS52K 3.2500 82.550 0.0008 0.020 4.7500 120.650 0.0008 0.020 0.7500 19.050 0.005 0.13 0.047 1.2 1.38 0.626 6700 30000 8000 35500
XLS56K 3.5000 88.900 0.0008 0.020 5.0000 127.000 0.0008 0.020 0.7500 19.050 0.005 0.13 0.065 1.7 1.48 0.671 7100 31500 8150 36500
XLS60K2 3.7500 95.250 0.0008 0.020 5.2500 133.350 0.0008 0.020 0.7500 19.050 0.005 0.13 0.063 1.6 1.57 0.712 7800 34500 8650 39000
XLS64K2 4.0000 101.600 0.0008 0.020 5.6240 142.849 0.0010 0.025 0.8750 22.230 0.005 0.13 0.080 2.0 1.75 0.794 9500 41500 10600 47500
41BIC196 4.1250 104.648 0.0008 0.020 6.0000 152.400 0.0010 0.025 0.8750 22.230 0.008 0.20 0.100 2.5 3.24 1.47 10600 47500 12500 55000
42BIC196 4.2500 107.950 0.0008 0.020 6.0000 152.400 0.0010 0.025 0.8750 22.230 0.008 0.20 0.100 2.5 3.03 1.374 10600 47500 12500 55000
43BIC206 4.3750 111.125 0.0008 0.020 6.2500 158.750 0.0010 0.025 0.8750 22.230 0.008 0.20 0.100 2.5 3.4 1.542 11400 51000 12900 57000
XLS72KD2 4.5000 114.300 0.0008 0.020 6.2490 158.730 0.0010 0.025 0.8750 22.230 0.008 0.20 0.080 2.0 2.47 1.120 12000 54000 13400 60000
45BIC206 4.5000 114.300 0.0008 0.020 6.2500 158.750 0.0010 0.025 0.8750 22.230 0.008 0.20 0.100 2.5 3.18 1.442 11400 51000 12900 57000
46BIC216 4.6250 117.475 0.0008 0.020 6.5000 165.100 0.0010 0.025 0.8750 22.230 0.008 0.20 0.100 2.5 3.56 1.615 12000 54000 13200 58500
47BIC216 4.7500 120.650 0.0010 0.025 6.5000 165.100 0.0010 0.025 0.8750 22.230 0.010 0.25 0.100 2.5 3.33 1.51 12700 57000 13700 61000
48BIC225 4.8750 123.825 0.0010 0.025 7.0000 177.800 0.0010 0.025 1.0000 25.400 0.010 0.25 0.100 2.5 4.97 2.254 15000 65500 16600 75000
XLS76K2 4.7500 120.650 0.0010 0.025 6.5000 165.100 0.0010 0.025 0.8750 22.230 0.010 0.25 0.065 1.7 2.55 1.157 12700 57000 13700 61000
XLS80K2 5.0000 127.000 0.0010 0.025 6.9990 177.775 0.0010 0.025 1.0000 25.400 0.010 0.25 0.080 2.0 3.55 1.61 15000 67000 16300 72000
50BIC225 5.0000 127.000 0.0010 0.025 7.0000 177.800 0.0010 0.025 1.0000 25.400 0.010 0.25 0.100 2.5 5.0 2.3 15000 65500 16600 75000
51BIC240 5.1250 130.175 0.0010 0.025 7.2500 184.150 0.0012 0.030 1.0000 25.400 0.010 0.25 0.100 2.5 5.5 2.5 15600 69500 17300 76500
52BIC240 5.2500 133.350 0.0010 0.025 7.2500 184.150 0.0012 0.030 1.0000 25.400 0.010 0.25 0.100 2.5 5.2 2.4 15600 69500 17300 76500
53BIC247 5.3750 136.525 0.0010 0.025 7.5000 190.500 0.0012 0.030 1.0000 25.400 0.010 0.25 0.100 2.5 5.7 2.6 16600 75000 17600 80000
55BIC247 5.5000 139.700 0.0010 0.025 7.5000 190.500 0.0012 0.030 1.0000 25.400 0.010 0.25 0.100 2.5 5.4 2.5 16600 75000 17600 80000
56BIC251 5.6250 142.875 0.0010 0.025 7.7500 196.850 0.0012 0.030 1.0000 25.400 0.010 0.25 0.100 2.5 5.9 2.7 16600 75000 17600 80000
57BIC251 5.7500 146.050 0.0010 0.025 7.7500 196.850 0.0012 0.030 1.0000 25.400 0.010 0.25 0.100 2.5 5.6 2.5 16600 75000 17600 80000
58BIC258 5.8750 149.225 0.0010 0.025 8.0000 203.200 0.0012 0.030 1.0000 25.400 0.010 0.25 0.100 2.5 6.1 2.8 17300 78000 18000 81500
60BIC258 6.0000 152.400 0.0010 0.025 8.0000 203.200 0.0012 0.030 1.0000 25.400 0.010 0.25 0.100 2.5 5.8 2.6 17300 78000 18000 81500
62BIC290 6.2500 158.750 0.0010 0.025 8.5000 215.900 0.0012 0.030 1.1250 28.575 0.010 0.25 0.120 3.0 7.7 3.5 23200 104000 23600 106000
65BIC298 6.5000 165.100 0.0010 0.025 8.7500 222.250 0.0012 0.030 1.1250 28.575 0.010 0.25 0.120 3.0 7.9 3.6 22000 98000 22800 102000
67BIC301 6.7500 171.450 0.0010 0.025 9.0000 228.600 0.0012 0.030 1.1250 28.575 0.010 0.25 0.120 3.0 8.2 3.7 23200 104000 23600 104000
70BIC309 7.0000 177.800 0.0010 0.025 9.5000 241.300 0.0012 0.030 1.2500 31.750 0.010 0.25 0.120 3.0 10.6 4.8 26000 116000 26500 118000
72BIC340 7.2500 184.150 0.0012 0.030 9.7500 247.650 0.0012 0.030 1.2500 31.750 0.012 0.31 0.120 3.0 10.8 4.9 27500 122000 27000 122000
75BIC348 7.5000 190.500 0.0012 0.030 10.0000 254.000 0.0014 0.036 1.2500 31.750 0.012 0.31 0.120 3.0 11.1 5 27500 122000 27000 122000
77BIC351 7.7500 196.850 0.0012 0.030 10.5000 266.700 0.0014 0.036 1.3750 34.925 0.012 0.31 0.120 3.0 13.9 6.3 32500 146000 32500 143000
80BIC359 8.0000 203.200 0.0012 0.030 10.7500 273.050 0.0014 0.036 1.3750 34.925 0.012 0.31 0.120 3.0 14.2 6.5 32500 146000 32500 143000
82BIC390 8.2500 209.550 0.0012 0.030 11.0000 279.400 0.0014 0.036 1.3750 34.925 0.012 0.31 0.120 3.0 14.6 6.6 34500 153000 33500 150000
85BIC391 8.5000 215.900 0.0012 0.030 11.5000 292.100 0.0014 0.036 1.5000 38.100 0.012 0.31 0.120 3.0 18.0 8.2 37500 166000 36500 163000
87BIC393 8.7500 222.250 0.0012 0.030 11.7500 298.450 0.0014 0.036 1.5000 38.100 0.012 0.31 0.120 3.0 18.5 8.4 40000 176000 38000 170000
90BIC401 9.0000 228.600 0.0012 0.030 12.0000 304.800 0.0014 0.036 1.5000 38.100 0.012 0.31 0.120 3.0 18.9 8.6 40000 176000 37500 166000
95BIC430 9.5000 241.300 0.0012 0.030 12.7500 323.850 0.0016 0.041 1.6250 41.275 0.014 0.36 0.160 4.0 23.4 10.6 45000 200000 42500 190000
100BIC439 10.0000 254.000 0.0014 0.036 13.2500 336.550 0.0016 0.041 1.6250 41.275 0.014 0.36 0.160 4.0 24.4 11.1 47500 212000 43000 193000
105BIC470 10.5000 266.700 0.0014 0.036 14.0000 355.600 0.0016 0.041 1.7500 44.450 0.014 0.36 0.160 4.0 29.8 13.5 57000 255000 50000 224000
110BIC479 11.0000 279.400 0.0014 0.036 14.5000 368.300 0.0016 0.041 1.7500 44.450 0.014 0.36 0.160 4.0 31.0 14.1 57000 255000 50000 220000
115BIC510 11.5000 292.100 0.0014 0.036 15.2500 387.350 0.0016 0.041 1.8750 47.625 0.014 0.36 0.200 5.0 37.2 16.9 64000 280000 54000 240000
120BIC519 12.0000 304.800 0.0014 0.036 16.0000 406.400 0.0018 0.046 2.0000 50.800 0.014 0.36 0.200 5.0 44.1 20 71000 315000 58500 255000
125BIC550 12.5000 317.500 0.0016 0.041 16.5000 419.100 0.0018 0.046 2.0000 50.800 0.016 0.41 0.200 5.0 45.7 20.7 73500 325000 60000 265000
135BIC580 13.5000 342.900 0.0016 0.041 18.0000 457.200 0.0018 0.046 2.2500 57.150 0.016 0.41 0.200 5.0 61.6 27.9 93000 415000 71000 315000
140BIC588 14.0000 355.600 0.0016 0.041 18.5000 469.900 0.0018 0.046 2.2500 57.150 0.016 0.41 0.200 5.0 63.4 28.8 93000 415000 69500 310000
145BIC610 14.5000 368.300 0.0016 0.041 19.5000 495.300 0.0018 0.046 2.5000 63.500 0.016 0.41 0.200 5.0 82.5 37.4 110000 490000 80000 355000
150BIC613 15.0000 381.000 0.0016 0.041 20.0000 508.000 0.0020 0.051 2.5000 63.500 0.016 0.41 0.200 5.0 84.8 38.5 110000 490000 80000 355000
155BIC615 15.5000 393.700 0.0016 0.041 20.5000 520.700 0.0020 0.051 2.5000 63.500 0.016 0.41 0.200 5.0 87.1 39.5 110000 490000 78000 345000
160BIC647 16.0000 406.400 0.0018 0.046 21.5000 546.100 0.0020 0.051 2.7500 69.850 0.018 0.46 0.200 5.0 107.6 48.8 132000 585000 90000 400000
165BIC660 16.5000 419.100 0.0018 0.046 22.0000 558.800 0.0020 0.051 2.7500 69.850 0.018 0.46 0.200 5.0 110.6 50.2 137000 620000 93000 415000
170BIC661 17.0000 431.800 0.0018 0.046 22.5000 571.500 0.0020 0.051 2.7500 69.850 0.018 0.46 0.200 5.0 113.3 51.4 137000 620000 93000 415000
175BIC680 17.5000 444.500 0.0018 0.046 23.5000 596.900 0.0020 0.051 3.0000 76.200 0.018 0.46 0.200 5.0 140.8 63.8 160000 710000 102000 455000
180BIC687 18.0000 457.200 0.0018 0.046 24.0000 609.600 0.0020 0.051 3.0000 76.200 0.018 0.46 0.200 5.0 144.0 65.3 160000 710000 102000 455000
185BIC695 18.5000 469.900 0.0018 0.046 24.5000 622.300 0.0020 0.051 3.0000 76.200 0.018 0.46 0.200 5.0 147.3 66.8 160000 710000 102000 455000
190BIC696 19.0000 482.600 0.0018 0.046 25.5000 647.700 0.0030 0.076 3.2500 82.550 0.018 0.46 0.200 5.0 177.9 80.7 180000 800000 112000 500000
195BIC710 19.5000 495.300 0.0020 0.051 26.0000 660.400 0.0030 0.076 3.2500 82.550 0.018 0.46 0.200 5.0 181.7 82.4 180000 800000 112000 500000
200BIC717 20.0000 508.000 0.0020 0.051 26.5000 673.100 0.0030 0.076 3.2500 82.550 0.020 0.51 0.200 5.0 185.9 84.3 190000 850000 114000 510000
205BIC725 20.5000 520.700 0.0020 0.051 27.5000 698.500 0.0030 0.076 3.5000 88.900 0.020 0.51 0.200 5.0 215.0 97.5 216000 965000 129000 570000
210BIC726 21.0000 533.400 0.0020 0.051 28.0000 711.200 0.0030 0.076 3.5000 88.900 0.020 0.51 0.200 5.0 219.8 99.7 228000 1020000 132000 585000
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
44
tolerance
+0.0000"
D
tolerance
+0.0000"
tolerance
+0.0000"
Rating
CO
Load
Rating
CE
1
+0.000 mm +0.000 mm +0.000 mm
to minus to minus to minus
in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg lbs. N lbs. N
41BIH196 4.1250 104.775 0.0008 0.020 6.0000 152.400 0.0010 0.025 0.8750 22.23 0.008 0.20 0.10 2.5 3.11 1.411 14000 63000 14600 65500
42BIH196 4.2500 107.950 0.0008 0.020 6.0000 152.400 0.0010 0.025 0.8750 22.23 0.008 0.20 0.10 2.5 2.91 1.32 16000 71000 16300 72000
43BIH206 4.3750 111.125 0.0008 0.020 6.2500 158.750 0.0010 0.025 0.8750 22.23 0.008 0.20 0.10 2.5 3.27 1.483 11400 51000 12900 57000
45BIH206 4.5000 114.300 0.0008 0.020 6.2500 158.750 0.0010 0.025 0.8750 22.23 0.008 0.20 0.10 2.5 3.05 1.383 16600 75000 16600 73500
46BIH216 4.6250 117.475 0.0008 0.020 6.5000 165.100 0.0010 0.025 0.8750 22.23 0.008 0.20 0.10 2.5 3.44 1.56 18000 80000 17300 76500
48BIH225 4.8750 123.825 0.0010 0.025 7.0000 177.800 0.0010 0.025 1.0000 25.40 0.010 0.25 0.10 2.5 4.87 2.209 23200 104000 22400 100000
50BIH225 5.0000 127.000 0.0010 0.025 7.0000 177.800 0.0010 0.025 1.0000 25.40 0.010 0.25 0.10 2.5 5.0 2.3 23200 104000 22400 100000
51BIH240 5.1250 130.175 0.0010 0.025 7.2500 184.150 0.0012 0.030 1.0000 25.40 0.010 0.25 0.10 2.5 5.5 2.5 24000 108000 22800 102000
52BIH240 5.2500 133.350 0.0010 0.025 7.2500 184.150 0.0012 0.030 1.0000 25.40 0.010 0.25 0.10 2.5 5.2 2.4 23200 104000 22400 100000
53BIH247 5.3750 136.525 0.0010 0.025 7.5000 190.500 0.0012 0.030 1.0000 25.40 0.010 0.25 0.10 2.5 5.7 2.6 25000 112000 23200 104000
55BIH247 5.5000 139.700 0.0010 0.025 7.5000 190.500 0.0012 0.030 1.0000 25.40 0.010 0.25 0.10 2.5 5.4 2.5 25000 112000 23200 104000
56BIH251 5.6250 142.875 0.0010 0.025 7.7500 196.850 0.0012 0.030 1.0000 25.40 0.010 0.25 0.10 2.5 5.9 2.7 26000 116000 23600 106000
57BIH251 5.7500 146.050 0.0010 0.025 7.7500 196.850 0.0012 0.030 1.0000 25.40 0.010 0.25 0.10 2.5 5.6 2.5 26000 116000 23600 106000
58BIH258 5.8750 149.225 0.0010 0.025 8.0000 203.200 0.0012 0.030 1.0000 25.40 0.010 0.25 0.10 2.5 6.1 2.8 26500 118000 24000 108000
60BIH258 6.0000 152.400 0.0010 0.025 8.0000 203.200 0.0012 0.030 1.0000 25.40 0.010 0.25 0.10 2.5 5.8 2.6 26500 118000 24000 108000
62BIH290 6.2500 158.750 0.0010 0.025 8.5000 215.900 0.0012 0.030 1.1250 28.575 0.010 0.25 0.12 3.0 7.7 3.5 33500 146000 30000 134000
65BIH298 6.5000 165.100 0.0010 0.025 8.7500 222.250 0.0012 0.030 1.1250 28.575 0.010 0.25 0.12 3.0 7.9 3.6 34500 153000 30500 137000
67BIH301 6.7500 171.450 0.0010 0.025 9.0000 228.600 0.0012 0.030 1.1250 28.575 0.010 0.25 0.12 3.0 8.2 3.7 35500 160000 31000 137000
70BIH309 7.0000 177.800 0.0010 0.025 9.5000 241.300 0.0012 0.030 1.2500 31.750 0.010 0.25 0.12 3.0 10.6 4.8 40500 180000 35500 160000
72BIH340 7.2500 184.150 0.0012 0.030 9.7500 247.650 0.0012 0.030 1.2500 31.750 0.012 0.31 0.12 3.0 10.8 4.9 42500 186000 36000 160000
75BIH348 7.5000 190.500 0.0012 0.030 10.0000 254.000 0.0014 0.036 1.2500 31.750 0.012 0.31 0.12 3.0 11.1 5.0 43000 193000 36500 163000
77BIH351 7.7500 196.850 0.0012 0.030 10.5000 266.700 0.0014 0.036 1.3750 34.925 0.012 0.31 0.12 3.0 13.9 6.3 51000 228000 44000 193000
80BIH359 8.0000 203.200 0.0012 0.030 10.7500 273.050 0.0014 0.036 1.3750 34.925 0.012 0.31 0.12 3.0 14.2 6.5 53000 236000 45000 200000
82BIH390 8.2500 209.550 0.0012 0.030 11.0000 279.400 0.0014 0.036 1.3750 34.925 0.012 0.31 0.12 3.0 10.6 6.6 55000 245000 45500 200000
85BIH391 8.5000 215.900 0.0012 0.030 11.5000 292.100 0.0014 0.036 1.5000 38.100 0.012 0.31 0.12 3.0 18.0 8.2 61000 270000 50000 224000
87BIH393 8.7500 222.250 0.0012 0.030 11.7500 298.450 0.0014 0.036 1.5000 38.100 0.012 0.31 0.12 3.0 18.5 8.4 61000 270000 50000 224000
90BIH401 9.0000 228.600 0.0012 0.030 12.0000 304.800 0.0014 0.036 1.5000 38.100 0.012 0.31 0.12 3.0 18.9 8.6 63000 280000 51000 228000
95BIH430 9.5000 241.300 0.0012 0.030 12.7500 323.850 0.0014 0.036 1.6250 41.275 0.014 0.36 0.16 4.0 23.4 10.6 71000 315000 57000 255000
100BIH439 10.0000 254.000 0.0014 0.036 13.2500 336.550 0.0016 0.041 1.6250 41.275 0.014 0.36 0.16 4.0 24.4 11.1 73500 325000 58500 260000
105BIH470 10.5000 266.700 0.0014 0.036 14.0000 355.600 0.0016 0.041 1.7500 44.450 0.014 0.36 0.16 4.0 29.8 13.5 90000 400000 68000 300000
110BIH479 11.0000 279.400 0.0014 0.036 14.5000 368.300 0.0016 0.041 1.7500 44.450 0.014 0.36 0.16 4.0 31.0 14.1 93000 415000 69500 305000
115BIH510 11.5000 292.100 0.0014 0.036 15.2500 387.350 0.0016 0.041 1.8750 47.625 0.014 0.36 0.20 5.0 37.2 16.9 104000 465000 75000 335000
120BIH519 12.0000 304.800 0.0014 0.036 16.0000 406.400 0.0018 0.046 2.0000 50.800 0.014 0.36 0.20 5.0 44.1 20 116000 510000 80000 355000
135BIH580 13.5000 342.900 0.0016 0.041 18.0000 457.200 0.0018 0.046 2.2500 57.150 0.016 0.41 0.20 5.0 61.6 27.9 146000 655000 95000 425000
140BIH588 14.0000 355.600 0.0016 0.041 18.5000 469.900 0.0018 0.046 2.2500 57.150 0.016 0.41 0.20 5.0 63.4 28.8 150000 680000 96500 430000
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
45
C
Filling-Slot Type Counterbore Type
DIMENSIONS – TOLERANCES
Bearing Bore Outside Width Fillet Weight Static Extended
(1)
Number d Diameter C Radius Load Dynamic
D Rating Load
tolerance tolerance +0.000" CO Rating
filling- counter- one +0.0000" +0.0000" -.010" filling- counter- CE
slot bore shield +0.000 mm +0.000 mm +0.00 mm slot bore shielded
type type D to minus to minus -.25 mm type type type
in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg lbs. kg lbs. kg lbs. N lbs. N
100 SERIES
(4)
120W2 — 120WD2N 3.9370 100 0.0008 0.020 6.2992 160 0.0010 0.025 1.102 28 0.079 2.01 4.5 2.041 — — 4.5 2.041 17000 75000 24000 106000
(3) (4)
122W 122WI 122WD2N 4.3307 110 0.0008 0.020 6.8898 175 0.0010 0.025 1.181 30 0.079 2.01 6.09 2.762 6.25 2.835 6.96 3.157 18000 80000 26000 116000
(4)
124W 124WI 124WD 4.7244 120 0.0008 0.020 7.4803 190 0.0012 0.030 1.260 32 0.079 2.01 7.66 3.475 7.8 3.538 7.64 3.466 22400 98000 31500 140000
126W 126WI 126WD 5.1181 130 0.0010 0.025 8.0709 205 0.0012 0.030 1.339 34 0.079 2.01 9.56 4.336 9.52 4.318 9.55 4.332 24500 110000 33500 146000
128W 128WI 128WD 5.5118 140 0.0010 0.025 8.6614 220 0.0012 0.030 1.417 36 0.079 2.01 11.55 5.239 11.56 5.244 11.67 5.294 27000 122000 36500 163000
130W — 130WD 5.9055 150 0.0010 0.025 9.2520 235 0.0012 0.030 1.496 38 0.079 2.01 13.84 6.278 — — 14.19 6.437 31500 140000 41500 183000
132W — 132WD 6.2992 160 0.0010 0.025 9.8425 250 0.0012 0.030 1.575 40 0.098 2.49 16.3 7.394 — — 16.5 7.484 35500 160000 46500 208000
134W — — 6.6929 170 0.0010 0.025 10.4331 265 0.0014 0.035 1.654 42 0.098 2.49 19.95 9.049 — — — — 40000 180000 51000 224000
— — 136WD2N 7.0866 180 0.0010 0.025 11.0236 280 0.0014 0.035 1.929 49 0.098 2.49 — — — — 24.26 11.004 45000 200000 55000 245000
(2)
138W — — 7.4803 190 0.0120 0.030 11.8110 300 0.0014 0.035 1.811 46 0.098 2.49 28.5 12.928 — — — — 56000 245000 64000 285000
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
(2)
+.000",-.010" (+.00mm,-.25mm)
(3)
35mm width
(4)
Width tolerance is +.000",-.008" (+.00mm,-.20mm)
46
7000WN Series
INTRODUCTION APPLICATIONS
The high performance 7000WN Angular Contact Series is specifically These design features are especially advantageous in applications
designed to support heavy thrust loads at lower operating temperatures such as oil refining pump systems where higher productivity through
at high speeds. Included in the angular contact series are the following minimum downtime and longer system life is an ongoing objective.
design features which are described in detail below: Other applications where these features are equally suited are deep
well pump motors, vertical and horizontal pumps, worm gear and right
• Refined Bore Diameter — better than ABEC 1 bore diameter
angle drives, spindles, live centers and gearboxes. For applications
Tolerance tolerances
requiring a high degree of axial and radial rigidity, these bearings are
• Increased Thrust Capacity — High operating contact angle recommended in preloaded duplex mountings.
• Extended Load Capacity — improved ball section ratio
MOUNTING
• Lower Operating Temperatures — low shoulder inner and outer rings
Although each 7000WN series bearing is a self-contained unit, the
improve oil flow
construction is such that they are frequently mounted as two bearings
An outstanding feature of this series is the refined bore diameter opposed, so that thrust can be carried in either direction.
tolerance. The closer bore tolerance in the WN series reduces the broad Unlike the radial type, the angular contact bearing, when mounted
range of interference and thus prevents the development of undesirable alone, requires adjustment and must be installed with care. As the
high preload in mounted duplex pairs. As a result, longer bearing life is
achieved and unduly high operating temperatures are avoided.
bearing is relatively loose axially before mounting, it is important that 1
the design incorporate some means to move the outer ring axially into
Combining exceptionally high shoulders on the thrust side of its correct position relative to the inner ring. This adjustment should be
both rings with a high operating angle, this series can support heavy made when the bearing is mounted. A common method is to place a
thrust loads. In addition, uniformity of load per ball under combined preload spring or shims at one bearing location.
loads is more favorable with a high contact angle and results in longer The correct adjustment of the single bearing is obtained when the
bearing life. initial axial looseness of the assembly is removed. This eliminates the
Maximum clearance between the one-piece brass or bronze cage possibility of premature bearing failure due to excessive preloading or
and the land diameters of both rings is achieved in the WN construction. looseness through improper adjustment.
Utilizing low shoulder diameters on the non-thrust sides of inner and Bearings designated “SU” are ground on both surfaces to permit
outer rings promotes efficient oil passage through the bearing resulting universal mounting. These duplex sets are ideally suited for applica-
in lower operating temperatures and longer bearing life. tions which involve a combination of radial loads from either direction.
The 7000WN series is divided into several designs. Sizes 7207- “SU” bearings are flush ground so that under a specific axial gage load
7218WN and 7304-7318WN have a 40 degree contact angle and a the inner ring will protrude beyond the face of the outer ring. This
one-piece, ball-piloted, pressed brass cage. Sizes 7219-7230WN and design results in an internal axial clearance within the bearing pair
7319-7330WN have a 40 degree contact angle and a one-piece, outer which helps to minimize build-up of excessive preload within the
ring-piloted, high-strength machined bronze cage. The 7412WN and bearings when mounted on a shaft with maximum interference.
7415WN both have a 40 degree contact angle and a one-piece conical, To assure correct mounting of bearings in the 7000WN series, the
high-strength machined bronze cage. word THRUST is marked on the thrust face of both the inner and outer
The 7000WN Angular Contact Series is available as single bearings rings. This face should abut against the housing shoulder or the end
and duplex sets. A single with the suffix “SU” is flush ground on both cover, depending on the required direction of thrust.
faces for universal mounting. Such bearings can be used as singles or
duplex mounted back-to-back (DB), face-to-face (DF), or tandem (DT), ORDERING INFORMATION
depending on the functional requirements of the design. The mounting
“SU” Suffix: All bearings are packaged singly.
of duplex ”SU” bearings will result in a preload range of minimum
To obtain a pair of SU flush ground
internal clearance to a solid preload.
bearings for duplex mounting, specify
Bearings without the ”SU” designation are not flush ground and are
two bearings.
intended to be used as singles. These bearings are used to support
Example: (2) 7210WN SU bearings.
thrust from one direction and are often accompanied by a preload
spring.
“DU” Suffix: All bearings are packaged as a pair
Bearings with the suffix ”DU” are flush ground on both faces for
in a single box. To obtain a pair of DU
universal mounting. A duplex pair of ”DU” bearings can be mounted
flush ground bearings for duplex
back-to-back (DB), face-to-face (DF), or tandem (DT), depending on the
mounting, specify one pair.
functional requirements of the design. These bearings, after mounting,
Example: one pair-7219WN MBR-DU.
will result in a range of positive light preload.
No Suffix: All bearings are packaged singly. No
other designation is required to obtain
single bearings.
Example: 7209WN
MOUNTING ARRANGEMENTS
Duplex- DB Duplex- DF Duplex- DT Tandem Three Bearings in Tandem Two in Tandem Opposed
Back-to-Back Face-to-Face with a Single Bearing
47
DIMENSIONS – TOLERANCES
Bearing Bore Outside Diameter Width Fillet Wt. Static Extended
Number d D C Radius(1) Load Dynamic
tolerance tolerance tolerance Rating Load
+0.0000" +0.0000" +0.0000" Co Rating
+0.000 mm +0.000 mm +0.000 mm CE
to minus to minus to minus
in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg lbs. N lbs. N
7201K 0.4724 12 0.0003 0.008 1.2598 32 0.00045 0.011 0.3937 10 0.005 0.12 0.024 0.6 0.08 0.036 630 2790 1600 7100
7202W 0.5906 15 0.0003 0.008 1.3780 35 0.00045 0.011 0.4331 11 0.005 0.12 0.024 0.6 0.1 0.045 1060 4700 2320 10300
7203W 0.6693 17 0.0003 0.008 1.5748 40 0.00045 0.011 0.4727 12 0.005 0.12 0.024 0.6 0.15 0.068 1560 6930 3200 14200
(2) (3)
7204WN 0.7874 20 0.0004 0.010 1.8504 47 0.00045 0.011 0.5512 14 0.005 0.12 0.039 1.0 0.23 0.104 1830 8100 3800 16800
(3)
7205WN 0.9843 25 0.0004 0.010 2.0472 52 0.0005 0.013 0.5906 15 0.005 0.12 0.039 1.0 0.29 0.132 2120 9400 3750 16600
7206WN 1.1811 30 0.0004 0.010 2.4409 62 0.0005 0.013 0.6299 16 0.005 0.12 0.039 1.0 0.46 0.209 3050 13500 5200 23000
7207WN 1.3780 35 0.0004 0.010 2.8346 72 0.0005 0.013 0.6693 17 0.005 0.12 0.039 1.0 0.63 0.286 4150 18000 6950 30800
7208WN 1.5748 40 0.0004 0.010 3.1496 80 0.0005 0.013 0.7087 18 0.005 0.12 0.039 1.0 0.73 0.331 5200 23000 8150 36000
7209WN 1.7717 45 0.0004 0.010 3.3465 85 0.0006 0.015 0.7480 19 0.005 0.12 0.039 1.0 0.96 0.435 5850 25900 9150 40500
7210WN 1.9685 50 0.0004 0.010 3.5433 90 0.0006 0.015 0.7874 20 0.005 0.12 0.039 1.0 1.12 0.508 6400 28400 9500 42500
7211WN 2.1654 55 0.0004 0.010 3.9370 100 0.0006 0.015 0.8268 21 0.006 0.15 0.059 1.5 1.4 0.635 8150 36200 11800 52000
7212WN 2.3622 60 0.0004 0.010 4.3307 110 0.0006 0.015 0.8661 22 0.006 0.15 0.059 1.5 1.84 0.835 10000 44000 14300 63000
7213WN 2.5591 65 0.0004 0.010 4.7244 120 0.0006 0.015 0.9055 23 0.006 0.15 0.059 1.5 2.34 1.061 11800 52400 16300 72400
7214WN 2.7559 70 0.0004 0.010 4.9213 125 0.0007 0.018 0.9449 24 0.006 0.15 0.059 1.5 2.58 1.17 12900 57300 17600 78000
7215WN 2.9528 75 0.0004 0.010 5.1181 130 0.0007 0.018 0.9843 25 0.006 0.15 0.059 1.5 2.8 1.27 13200 58000 17600 78000
7216WN 3.1496 80 0.0004 0.010 5.5118 140 0.0007 0.018 1.0236 26 0.006 0.15 0.079 2.0 3.27 1.483 15600 65500 20400 91500
7217WN 3.3465 85 0.0005 0.013 5.9055 150 0.0007 0.018 1.1024 28 0.008 0.20 0.079 2.0 4.62 2.096 18300 76500 23600 106000
7218WN 3.5433 90 0.0005 0.013 6.2992 160 0.0010 0.025 1.1811 30 0.008 0.20 0.079 2.0 5.66 2.567 21200 88000 27000 119000
7219WN MBR 3.7402 95 0.0005 0.013 6.6929 170 0.0010 0.025 1.2600 32 0.008 0.20 0.079 2.0 6.67 3.025 22800 93000 30000 133000
7220WN MBR 3.9370 100 0.0005 0.013 7.0866 180 0.0010 0.025 1.3390 34 0.008 0.20 0.079 2.0 7.62 3.46 25500 106000 33500 146000
7222WN MBR 4.3307 110 0.0005 0.013 7.8740 200 0.0012 0.030 1.4960 38 0.008 0.20 0.079 2.0 11.38 5.162 32500 134000 39000 173000
7224WN MBR 4.7244 120 0.0005 0.013 8.4646 215 0.0012 0.030 1.5750 40 0.008 0.20 0.079 2.0 14.01 6.354 36500 160000 42500 188000
7226WN MBR 5.1181 130 0.0007 0.018 9.0551 230 0.0012 0.030 1.5750 40 0.010 0.25 0.098 2.5 16.63 7.543 43000 176000 47500 211000
7228WN MBR 5.5118 140 0.0007 0.018 9.8425 250 0.0012 0.030 1.6540 42 0.010 0.25 0.098 2.5 21.24 9.634 47500 200000 50000 224000
7230WN MBR 5.9055 150 0.0007 0.018 10.6299 270 0.0014 0.035 1.7720 45 0.010 0.25 0.098 2.5 25.84 11.72 56000 240000 56000 248000
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
(2)
Also available as W design.
(3)
Also available with 20° contact angle and nylon cage.
Note: 7208WN-7212WN also available with a one piece, high strength machined bronze retainer (MBR).
This cage can be quoted on the other sizes by request.
48
DIMENSIONS – TOLERANCES
Bearing Bore Outside Diameter Width Fillet Wt. Static Extended
(1)
Number d D C Radius Load Dynamic
Rating Load
tolerance tolerance tolerance CO Rating
+0.0000" +0.0000" +0.0000" CE
+0.000 mm +0.000 mm +0.000 mm
to minus to minus to minus
in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg lbs. N lbs. N
7303W 0.6693 17 0.0003 0.008 1.8504 47 0.00045 0.011 0.5512 14 0.005 0.12 0.039 1.0 0.26 0.118 2080 9200 4550 20200
7304WN 0.7874 20 0.0004 0.010 2.0472 52 0.0005 0.013 0.5906 15 0.005 0.12 0.039 1.0 0.33 0.15 2160 9590 4400 19500
7305WN 0.9843 25 0.0004 0.010 2.4409 62 0.0005 0.013 0.6693 17 0.005 0.12 0.039 1.0 0.53 0.24 3000 13300 5850 26500
7306WN 1.1811 30 0.0004 0.010 2.8346 72 0.0005 0.013 0.7480 19 0.005 0.12 0.039 1.0 0.8 0.363 4650 20800 7800 34600
7307WN 1.3780 35 0.0004 0.010 3.1496 80 0.0005 0.013 0.8268 21 0.005 0.12 0.059 1.5 0.9 0.408 5400 23900 9300 41300
7308WN 1.5748 40 0.0004 0.010 3.5433 90 0.0006 0.015 0.9055 23 0.005 0.12 0.059 1.5 1.47 0.667 6800 30200 11400 50600
7309WN 1.7717 45 0.0004 0.010 3.9370 100 0.0006 0.015 0.9843 25 0.005 0.12 0.059 1.5 1.95 0.885 9000 39900 15000 66600
7310WN 1.9685 50 0.0004 0.010 4.3307 110 0.0006 0.015 1.0630 27 0.005 0.12 0.079 2.0 2.51 1.139 10800 47900 17300 76800
7311WN 2.1654 55 0.0004 0.010 4.7244 120 0.0006 0.015 1.1417 29 0.006 0.15 0.079 2.0 3.51 1.592 12700 56400 20000 88800
7312WN 2.3622 60 0.0004 0.010 5.1181 130 0.0007 0.018 1.2205 31 0.006 0.15 0.079 2.0 4.34 1.969 14600 64800 22800 101000
7313WN 2.5591 65 0.0004 0.010 5.5118 140 0.0007 0.018 1.2992 33 0.006 0.15 0.079 2.0 5.46 2.477 17000 75500 26000 115000
7314WN 2.7559 70 0.0004 0.010 5.9055 150 0.0007 0.018 1.3780 35 0.006 0.15 0.079 2.0 5.9 2.676 19300 85700 29000 128000
7315WN 2.9528 75 0.0004 0.010 6.2992 160 0.0010 0.025 1.4567 37 0.006 0.15 0.079 2.0 7.61 3.452 22000 98000 32000 142000
7316WN 3.1496 80 0.0004 0.010 6.6929 170 0.0010 0.025 1.5354 39 0.006 0.15 0.079 2.0 9.92 4.5 24500 108000 34500 153000
7317WN 3.3465 85 0.0005 0.013 7.0866 180 0.0010 0.025 1.6124 41 0.008 0.20 0.098 2.5 10.88 4.936 27500 122000 37500 166000
7318WN 3.5433 90 0.0005 0.013 7.4803 190 0.0012 0.030 1.6929 43 0.008 0.20 0.098 2.5 13.76 6.242 30500 135000 40000 177000
7319WN MBR 3.7402 95 0.0005 0.013 7.8740 200 0.0012 0.030 1.7717 45 0.008 0.20 0.098 2.5 14.77 6.7 33500 148000 43000 191000
7320WN MBR 3.9370 100 0.0005 0.013 8.4646 215 0.0012 0.030 1.8504 47 0.008 0.20 0.098 2.5 18.12 8.22 40000 177000 49000 217000
7321WN MBR 4.1339 105 0.0005 0.013 8.8583 225 0.0012 0.030 1.9291 49 0.008 0.20 0.098 2.5 20.92 9.49 43000 191000 51000 226000
7322WN MBR 4.3307 110 0.0005 0.013 9.4488 240 0.0012 0.030 1.9685 50 0.008 0.20 0.098 2.5 23.99 10.88 51000 226000 57000 253000
7324WN MBR 4.7244 120 0.0005 0.013 10.2362 260 0.0014 0.035 2.1654 55 0.008 0.20 0.098 2.5 31.62 14.34 58500 259000 64000 284000
7326WN MBR 5.1181 130 0.0007 0.018 11.0236 280 0.0014 0.035 2.2835 58 0.010 0.25 0.118 3.0 38.19 17.32 68000 302000 71000 315000
7328WN MBR 5.5118 140 0.0007 0.018 11.8110 300 0.0014 0.035 2.4409 62 0.010 0.25 0.118 3.0 44.7 20.28 78000 346000 76500 339000
7330WN MBR 5.9055 150 0.0007 0.018 12.5984 320 0.0016 0.040 2.5591 65 0.010 0.25 0.118 3.0 54.86 24.88 88000 390000 83000 368000
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
49
DIMENSIONS – TOLERANCES
Bearing Bore Outside Diameter Width Fillet Wt. Static Extended
(1)
Number d D C Radius Load Dynamic
Rating Load
tolerance tolerance tolerance CO Rating
+0.0000" +0.0000" +0.0000" CE
+0.000 mm +0.000 mm +0.000 mm
to minus to minus to minus
in. mm in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg lbs. N lbs. N
7405W 0.9843 25 0.0004 0.010 3.1496 80 0.0005 0.013 0.8268 21 0.005 0.12 0.060 1.5 2.04 0.925 5850 25900 12000 53300
7406W 1.1811 30 0.0004 0.010 3.5433 90 0.0006 0.015 0.9055 23 0.005 0.12 0.060 1.5 2.11 0.957 8000 35500 15600 69000
7407W 1.3780 35 0.00045 0.012 3.9370 100 0.0006 0.015 0.9843 25 0.005 0.12 0.060 1.5 2.21 1.002 9650 42800 18000 79900
7408W 1.5748 40 0.00045 0.012 4.3307 110 0.0006 0.015 1.0630 27 0.005 0.12 0.080 2.0 2.89 1.311 12700 56400 22400 99500
7409W 1.7717 45 0.00045 0.012 4.7244 120 0.0006 0.015 1.1417 29 0.005 0.12 0.080 2.0 3.63 1.647 14000 62000 24000 106000
7410WN 1.9685 50 0.00045 0.012 5.1181 130 0.0007 0.018 1.2205 31 0.005 0.12 0.080 2.0 4.84 2.195 15000 66600 26000 115000
7411PW 2.1654 55 0.0006 0.015 5.5118 140 0.0007 0.018 1.2992 33 0.006 0.15 0.080 2.0 5.91 2.681 16000 71000 27500 122000
7412WN 2.3622 60 0.0004 0.010 5.9055 150 0.0007 0.018 1.3780 35 0.006 0.15 0.080 2.0 7.18 3.257 19300 85700 30500 135000
7413WN 2.5591 65 0.0006 0.015 6.2992 160 0.0010 0.025 1.4567 37 0.006 0.15 0.080 2.0 8.59 3.896 20400 91500 32000 142000
7414WN 2.7559 70 0.0006 0.015 7.0866 180 0.0010 0.025 1.6535 42 0.006 0.15 0.100 2.5 12.54 5.688 26000 115500 39000 173000
7415WN 2.9528 75 0.0004 0.010 7.4803 190 0.0012 0.030 1.7717 45 0.006 0.15 0.100 2.5 14.87 6.745 33500 148000 45500 202000
7416WN 3.1496 80 0.0006 0.015 7.8740 200 0.0012 0.030 1.8898 48 0.006 0.15 0.100 2.5 17.08 7.747 34500 153000 46500 206000
7418PW 3.5433 90 0.0008 0.020 8.8583 225 0.0012 0.030 2.1268 54 0.008 0.20 0.120 3.0 24.6 11.159 45000 200000 53000 236000
7420PW 3.9370 100 0.0008 0.020 10.4331 265 0.0014 0.036 2.3622 60 0.008 0.20 0.120 3.0 41.1 18.643 63000 279000 71000 315000
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
50
1
C
DIMENSIONS – TOLERANCES
Bearing Bore Outside Diameter Width Fillet Contact Wt. Static Extended
(1)
Number d D C Radius Angle Load Dynamic
tolerance tolerance Rating Load
+0.0000" +0.0000" +0.000",-0.005" Co Rating
+0.000 mm +0.000 mm +0.00 mm,-0.12 mm CE
to minus to minus frac. decimal
in. mm in. mm in. mm in. mm in. in. mm in. mm lbs. kg lbs. N lbs. N
(2) 9
5200K 0.3937 10 0.0003 0.008 1.1811 30 0.00035 0.009 ⁄16 0.562 14.27 0.024 0.6 20° 0.12 0.054 1140 5060 2400 10600
(2) 5
5201K 0.4724 12 0.0003 0.008 1.2598 32 0.00045 0.012 ⁄8 0.625 15.88 0.024 0.6 20° 0.15 0.068 1060 4700 2040 9060
(2) 5
5202K 0.5906 15 0.0003 0.008 1.3780 35 0.00045 0.012 ⁄8 0.625 15.88 0.024 0.6 20° 0.16 0.073 1600 7100 3050 13500
(2) 11
5203K 0.6693 17 0.0003 0.008 1.5748 40 0.00045 0.012 ⁄16 0.688 17.48 0.024 0.6 20° 0.23 0.104 2080 9200 3800 16800
(2) 13
5204K 0.7874 20 0.0004 0.010 1.8504 47 0.00045 0.012 ⁄16 0.812 20.62 0.039 1.0 20° 0.36 0.163 2850 12600 5100 22600
(2) 13
5205K 0.9843 25 0.0004 0.010 2.0472 52 0.0005 0.013 ⁄16 0.812 20.62 0.039 1.0 20° 0.41 0.186 3400 15100 5600 24800
15
5206K 1.1811 30 0.0004 0.010 2.4409 62 0.0005 0.013 ⁄16 0.938 23.83 0.039 1.0 20° 0.65 0.295 4900 21700 7800 34600
15
5206W 1.1811 30 0.0004 0.010 2.4409 62 0.0005 0.013 ⁄16 0.938 23.83 0.039 1.0 30° 0.65 0.295 6100 27000 8800 39000
1
5207K 1.3780 35 0.00045 0.012 2.8346 72 0.0005 0.013 1 ⁄16 1.062 26.97 0.039 1.0 20° 1.06 0.481 6550 29000 10200 45000
1
5207W 1.3780 35 0.00045 0.012 2.8346 72 0.0005 0.013 1 ⁄16 1.062 26.97 0.039 1.0 30° 1.06 0.481 8300 36800 11600 51500
3
5208K 1.5748 40 0.00045 0.012 3.1496 80 0.0005 0.013 1 ⁄16 1.188 30.17 0.039 1.0 20° 1.32 0.566 7650 33900 11600 51500
3
5208W 1.5748 40 0.00045 0.012 3.1496 80 0.0005 0.013 1 ⁄16 1.188 30.17 0.039 1.0 30° 1.32 0.599 10600 47000 14000 62000
3
5209K 1.7717 45 0.00045 0.012 3.3456 85 0.0006 0.015 1 ⁄16 1.188 30.17 0.039 1.0 20° 1.54 0.699 8800 39000 12900 57000
3
5209W 1.7717 45 0.00045 0.012 3.3456 85 0.0006 0.015 1 ⁄16 1.188 30.17 0.039 1.0 30° 1.54 0.699 11600 51500 14600 64800
3
5210K 1.9685 50 0.00045 0.012 3.5433 90 0.0006 0.015 1 ⁄16 1.188 30.17 0.039 1.0 20° 1.66 0.753 10000 44400 14000 62000
3
5210W 1.9685 50 0.00045 0.012 3.5433 90 0.0006 0.015 1 ⁄16 1.188 30.17 0.039 1.0 30° 1.66 0.753 12700 56000 15000 66600
5 (4)
5211K 2.1654 55 0.0006 0.015 3.9370 100 0.0006 0.015 1 ⁄16 1.312 33.32 0.059 1.5 20° 2.29 1.039 12700 71000 17300 76000
5 (4)
5211W 2.1654 55 0.0006 0.015 3.9370 100 0.0006 0.015 1 ⁄16 1.312 33.32 0.059 1.5 30° 2.29 1.039 16000 62000 19000 84000
7 (4)
5212K 2.3622 60 0.0006 0.015 4.3307 110 0.0006 0.015 1 ⁄16 1.438 36.53 0.059 1.5 20° 3.06 1.388 14000 88800 19300 85000
7 (4)
5212W 2.3622 60 0.0006 0.015 4.3307 110 0.0006 0.015 1 ⁄16 1.438 36.53 0.059 1.5 30° 3.06 1.388 20000 72000 23800 103000
1 (4)
5213K 2.5591 65 0.0006 0.015 4.7244 120 0.0006 0.015 1 ⁄2 1.500 38.10 0.059 1.5 20° 4.24 1.923 17300 76800 22800 101000
(3) 1 (4)
5213 2.5591 65 0.0006 0.015 4.7244 120 0.0006 0.015 1 ⁄2 1.500 38.10 0.059 1.5 30° 4.24 1.923 20800 92000 22400 99500
9 (4)
5214K 2.7559 70 0.0006 0.015 4.9213 125 0.0007 0.018 1 ⁄16 1.562 39.67 0.059 1.5 20° 4.62 2.096 19000 84000 24500 108000
(3) 9 (4)
5214 2.7559 70 0.0006 0.015 4.9213 125 0.0007 0.018 1 ⁄16 1.562 39.67 0.059 1.5 30° 4.62 2.096 28500 126000 31500 139000
5 (4)
5215K 2.9528 75 0.0006 0.015 5.1181 130 0.0007 0.018 1 ⁄8 1.625 41.28 0.059 1.5 20° 5.15 2.336 19300 85700 24500 108000
(3) 5 (4)
5215 2.9528 75 0.0006 0.015 5.1181 130 0.0007 0.018 1 ⁄8 1.625 41.28 0.059 1.5 30° 5.15 2.336 31000 137000 32500 144000
(3) 3 (4)
5216 3.1496 80 0.0006 0.015 5.5118 140 0.0007 0.018 1 ⁄4 1.750 44.45 0.079 2.0 30° 6.32 2.867 36500 162000 38000 168000
(3) 15 (5)
5217 3.3465 85 0.0008 0.020 5.9055 150 0.0007 0.018 1 ⁄16 1.938 49.23 0.079 2.0 30° 8 3.629 40000 177000 42500 188000
1 (5)
5218W 3.5433 90 0.0008 0.020 6.2992 160 0.0010 0.025 2 ⁄16 2.062 52.37 0.079 2.0 20° 9.96 4.518 43000 191000 45500 202000
(3) 3 (5)
5219 3.7402 95 0.0008 0.020 6.6929 170 0.0010 0.025 2 ⁄16 2.188 55.58 0.079 2.0 30° 11.93 5.411 53000 235000 55000 244000
3 (5)
5220W 3.9370 100 0.0008 0.020 7.0866 180 0.0010 0.025 2 ⁄8 2.375 60.32 0.079 2.0 20° 14.42 6.541 57000 253000 58500 259000
9 (5)
5221W 4.1339 105 0.0008 0.020 7.4803 190 0.0012 0.030 2 ⁄16 2.563 65.10 0.079 2.0 20° 16.6 7.53 67600 301000 67500 300000
(3) 3 (5)
5222 4.3307 110 0.0008 0.020 7.8740 200 0.0012 0.030 2 ⁄4 2.750 69.85 0.079 2.0 30° 20.95 9.503 76500 339000 73500 326000
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
(2)
Sizes have PRB molded nylon retainers.
(3)
These sizes have contact angle converging inside the bearing.
(4)
Width tolerance is +.000 to -.006" (+.00mm to -.15mm).
(5)
Width tolerance is +.000 to -.008" (+.00mm to -.20mm).
Note: See page 53 for Shield and Snap Ring Combinations.
51
DIMENSIONS – TOLERANCES
Bearing Bore Outside Diameter Width Fillet Contact Wt. Static Extended
(1)
Number d D C Radius Angle Load Dynamic
tolerance tolerance Rating Load
+0.0000" +0.0000" +0.000",-0.005" CO Rating
+0.000 mm +0.000 mm +0.00 mm,-0.12 mm CE
to minus to minus frac. decimal
in. mm in. mm in. mm in. mm in. in. mm in. mm lbs. kg lbs. N lbs. N
3
5302 0.5906 15 0.0003 0.008 1.6535 42 0.00045 0.012 ⁄4 0.750 19.05 0.039 1.0 20° 0.31 0.141 2080 9200 3800 16800
7
5303K 0.6693 17 0.0003 0.008 1.8504 47 0.00045 0.012 ⁄8 0.875 22.22 0.039 1.0 20° 0.42 0.191 2850 12600 5100 22600
(2) 7
5304K 0.7874 20 0.0004 0.010 2.0472 52 0.0005 0.013 ⁄8 0.875 22.22 0.039 1.0 20° 0.49 0.222 3450 15300 6400 28400
(2)
5305K 0.9843 25 0.0004 0.010 2.4409 62 0.0005 0.013 1 1.000 25.40 0.039 1.0 20° 0.81 0.367 4750 21100 8500 37700
3
5306K 1.1811 30 0.0004 0.010 2.8346 72 0.0005 0.013 1 ⁄16 1.188 30.17 0.039 1.0 20° 1.35 0.612 6550 29000 10600 47000
3
5306W 1.1811 30 0.0004 0.010 2.8346 72 0.0005 0.013 1 ⁄16 1.188 30.17 0.039 1.0 30° 1.35 0.612 9300 41000 14000 62000
3
5307K 1.3780 35 0.00045 0.012 3.1496 80 0.0005 0.013 1 ⁄8 1.375 34.93 0.059 1.5 20° 1.92 0.871 8300 36000 13400 59500
3
5307W 1.3780 35 0.00045 0.012 3.1496 80 0.0005 0.013 1 ⁄8 1.375 34.93 0.059 1.5 30° 1.92 0.871 10800 47900 15600 69200
7
5308K 1.5748 40 0.00045 0.012 3.5433 90 0.0006 0.015 1 ⁄16 1.438 36.53 0.059 1.5 20° 2.51 1.139 10400 46000 16300 72400
7
5308W 1.5748 40 0.00045 0.012 3.5433 90 0.0006 0.015 1 ⁄16 1.438 36.53 0.059 1.5 30° 2.51 1.139 15000 66600 20400 90600
9
5309K 1.7717 45 0.00045 0.012 3.9370 100 0.0006 0.015 1 ⁄16 1.562 39.67 0.059 1.5 20° 3.16 1.433 12700 56400 19600 87000
9
5309W 1.7717 45 0.00045 0.012 3.9370 100 0.0006 0.015 1 ⁄16 1.562 39.67 0.059 1.5 30° 3.16 1.433 18300 81000 24000 106000
3
5310K 1.9685 50 0.00045 0.012 4.3307 110 0.0006 0.015 1 ⁄4 1.750 44.45 0.079 2.0 20° 4.61 2.091 16600 73000 25000 111000
3
5310W 1.9685 50 0.00045 0.012 4.3307 110 0.0006 0.015 1 ⁄4 1.750 44.45 0.079 2.0 30° 4.61 2.091 22000 97000 28500 126000
15 (3)
5311K 2.1654 55 0.0006 0.012 4.7244 120 0.0006 0.015 1 ⁄16 1.938 49.22 0.079 2.0 20° 6 2.722 19500 86700 28000 124400
15 (3)
5311W 2.1654 55 0.0006 0.015 4.7244 120 0.0006 0.015 1 ⁄16 1.938 49.22 0.079 2.0 20° 6 2.722 25500 113000 32500 144000
1 (3)
5312W 2.3622 60 0.0006 0.015 5.1181 130 0.0007 0.018 2 ⁄8 2.125 53.98 0.079 2.0 20° 7.54 3.420 34000 151000 43000 191000
5 (3)
5313W 2.5591 65 0.0006 0.015 5.5118 140 0.0007 0.018 2 ⁄16 2.312 58.72 0.079 2.0 20° 9.17 4.160 39000 173000 48000 213000
1 (3)
5314W 2.7559 70 0.0006 0.015 5.9055 150 0.0007 0.018 2 ⁄2 2.500 63.50 0.079 2.0 20° 11.82 5.362 44000 195000 54000 239000
11 (3)
5315W 2.9528 75 0.0006 0.015 6.2992 160 0.0010 0.025 2 ⁄16 2.689 68.30 0.079 2.0 20° 14.17 6.428 50000 222000 60000 266000
11 (3)
5316W 3.1496 80 0.0006 0.015 6.6929 170 0.0010 0.025 2 ⁄16 2.688 68.28 0.079 2.0 20° 16.24 7.366 56000 248000 64000 284000
7 (4)
5317W 3.3465 85 0.0008 0.020 7.0866 180 0.0010 0.025 2 ⁄8 2.875 73.02 0.098 2.5 20° 19.46 8.827 63000 279000 69500 308000
7 (4)
5318W 3.5433 90 0.0008 0.020 7.4803 190 0.0012 0.030 2 ⁄8 2.875 73.02 0.098 2.5 20° 21.2 9.616 69500 308000 75000 333000
1 (4)
5319W 3.7402 95 0.0008 0.020 7.8740 200 0.0012 0.030 3 ⁄16 3.062 77.77 0.098 2.5 30° 25.49 11.562 72000 319000 75000 333000
1 (4)
5320W 3.9370 100 0.0008 0.020 8.4646 215 0.0012 0.030 3 ⁄4 3.250 82.55 0.098 2.5 20° 31.57 14.320 85000 377000 85000 377000
5 (4)
5322W 4.3307 110 0.0008 0.020 9.4488 240 0.0012 0.030 3 ⁄8 3.625 92.08 0.098 2.5 20° 44.43 20.153 108000 479000 102000 453000
1 (4)
5324W 4.7244 120 0.0008 0.020 10.2362 260 0.0014 0.035 4 ⁄8 4.125 104.78 0.098 2.5 20° 62.37 28.291 125000 555000 112000 497000
1 (5)
5328W 5.5118 140 0.0010 0.025 11.8110 300 0.0014 0.035 4 ⁄2 4.500 114.30 0.118 3.0 20° 84 38.102 140000 630000 129000 570000
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
(2)
Sizes have PRB molded nylon retainers.
(3)
Width tolerance is +.000 to -.006" (+.00mm to -.15mm).
(4)
Width tolerance is +.000 to 0-.008" (+.00mm to -.20mm).
(5)
Width tolerance is +.000 to -.010" (+.00mm to -.25 mm)
Note: See opposite page for Shield and Snap Ring Combinations.
52
OFFSET
THICKNESS
O.D.
1
5200 SERIES
(1)
Bearing Width Wt. Bearing Snap Ring Wt.
Number +0.000",-.005" Number
+0.00 mm,-.12mm
fraction decimal O.D. Thickness Offset
in. in mm lbs. kg in. mm in. mm in. mm lbs kg
5 (3) 23
5200KDD2 ⁄8 0.625 15.88 0.12 0.054 — 1 ⁄64 34.5 0.042 1.07 0.120 3.05 — —
5 7
5201KD(DD) ⁄8 0.625 15.88 0.14 0.064 — 1 ⁄16 36.5 0.042 1.07 0.120 3.05 — —
35
— — — — — — — 1 ⁄64 39.3 0.042 1.07 0.120 3.05 — —
11 3
5203KD(KDD3) ⁄16 0.688 17.48 0.35 0.159 5203KDG 1 ⁄4 44.4 0.042 1.07 0.120 3.05 0.28 0.127
13 1
5204KD ⁄16 0.812 20.62 0.26 0.118 5204KG 2 ⁄16 52.4 0.042 1.07 0.136 3.45 0.33 0.15
7 17
5205KD ⁄8 0.875 22.22 0.45 0.204 5205KG 2 ⁄64 57.5 0.042 1.07 0.136 3.45 0.44 0.2
1 21
5206WD 1 ⁄16 1.062 26.97 0.74 0.336 5206WG(KG) 2 ⁄32 67.5 0.065 1.65 0.190 4.83 0.73 0.331
3 5
5207WD 1 ⁄16 1.188 30.17 1.21 0.546 5207KG 3 ⁄64 78.2 0.065 1.65 0.190 4.83 — —
3 13
5208WD 1 ⁄16 1.188 30.17 1.46 0.662 — 3 ⁄32 86.5 0.065 1.65 0.190 4.83 — —
3 19
5209WD 1 ⁄16 1.188 30.17 1.57 0.712 5209WG(KG) 3 ⁄32 91.3 0.065 1.65 0.190 4.83 1.59 0.721
5 51
5210WD 1 ⁄16 1.312 33.32 1.8 0.816 5210WG(KG) 3 ⁄64 96.4 0.095 2.41 0.220 5.59 1.7 0.771
5 3
5211WD 1 ⁄16 1.312 33.32 2.3 1.043 5211WG(KG) 4 ⁄16 106.4 0.095 2.41 0.220 5.59 2.35 1.066
9 37
5212WD 1 ⁄16 1.562 39.67 3.3 1.497 5212WG(KG) 4 ⁄64 116.3 0.095 2.41 0.220 5.59 3.14 1.424
3
5213WD — — — — — — 5 ⁄32 129.4 0.109 2.77 0.265 6.73 — —
(2) 9 19
5214WD 1 ⁄16 1.562 39.67 4.71 2.137 — 5 ⁄64 134.5 0.109 2.77 0.265 6.73 — —
(2) 1
— — — — — — 5215G 5 ⁄2 139.7 0.109 2.77 0.265 6.73 5.13 2.327
(2) 7 (2) 57
5216DD 1 ⁄8 1.875 47.62 6.75 3.062 5216G 5 ⁄64 149.6 0.109 2.77 0.297 7.54 6.53 2.962
(2) 9
— — — — — — 5217G 6 ⁄32 159.5 0.109 2.77 0.297 7.54 8.21 3.724
1 43
5218WD 2 ⁄16 2.062 52.37 9.93 4.504 — 6 ⁄64 169.5 0.109 2.77 0.297 7.54 — —
(2) 3
— — — — — — 5219G 7 ⁄16 182.6 0.12 3.05 0.339 8.61 12.12 5.498
5300 SERIES
(1)
Bearing Width Wt. Bearing Snap Ring Wt.
(4)
Number +0.000",-.005" Number
+0.00 mm,-.12mm
fraction decimal O.D. Thickness Offset
in. in mm lbs. kg in. mm in. mm in. mm lbs kg
7 1
5303KDD ⁄8 .875 22.25 — — 5303KG 2 ⁄16 52.4 0.042 1.07 0.136 3.45 0.5 0.227
7 17
5304KDD ⁄8 .875 22.25 — — 5304KG 2 ⁄64 57.6 0.042 1.07 0.136 3.45 0.51 0.231
21
5305KDD2 1 1.000 25.4 — — 5305KG 2 ⁄32 67.5 0.065 1.65 0.190 4.83 0.83 0.376
5 5
5306WD 1 ⁄16 1.312 33.32 1.41 0.64 5306WG(KG) 3 ⁄64 78.2 0.065 1.65 0.190 4.83 1.34 0.608
1 13
5307WD 1 ⁄2 1.500 38.10 1.89 0.857 5307WG(KG) 3 ⁄32 86.5 0.065 1.65 0.190 4.83 1.78 0.807
9 51
5308WD 1 ⁄16 1.562 39.67 2.52 1.143 5308WG(KG) 3 ⁄64 96.4 0.095 2.41 0.220 5.59 2.43 1.102
11 3
5309WD 1 ⁄16 1.688 42.88 3.67 1.665 5309WG(KG) 4 ⁄16 106.4 0.095 2.41 0.220 5.59 3.22 1.461
7 37
5310WD 1 ⁄8 1.875 47.62 4.45 2.019 5310WG(KG) 4 ⁄64 116.3 0.095 2.41 0.220 5.59 4.26 1.932
(4) 1 3
5311D 2 ⁄16 2.062 52.37 6.23 2.826 5311WG(KG) 5 ⁄32 129.4 0.109 2.77 0.265 6.73 6.15 2.789
(4) 1 1
5312D 2 ⁄4 2.250 57.15 7.54 3.42 5312WG(KG) 5 ⁄2 139.7 0.109 2.77 0.265 6.73 7.7 3.493
(4) 7 57
5313D 2 ⁄16 2.438 61.72 10.28 4.663 5313WG(KG) 5 ⁄64 149.6 0.109 2.77 0.297 7.54 9.46 4.291
9
— — — — — — 5314WG(KG) 6 ⁄32 159.5 0.109 2.77 0.297 7.54 12.05 5.466
43
5315KG 6 ⁄64 169.6 0.109 2.77 0.297 7.54 — —
(1)
The snap ring is normally packaged separately in the box with the bearing.
(2)
These sizes have contact angle converging inside bearing. (30°)
(3)
Inner ring width is .7500" (19.05mm).
(4)
Ring widths are different for these parts. Contact Timken sales engineer to validate size.
53
54
2 MM C 91 04 WI CR DUL A3188
56
Superprecision
Bearings
Page Page
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58-59 Ceramic Hybrid Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
1
Ultra Light 2MM9300WI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Ball Screw Support Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Extra Light MM9100K Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Load Ratings (Ball Screw Support) . . . . . . . . . . . . . . . . . . . . . . . . 94
Extra Light 2MM9100WI and 3MM9100WI Series . . . . . . . . . . . . . 66 Shaft and Housing Diameters (Ball Screw Bearings) . . . . . . . . . . 95
Extra Light 2MMV99100WN and 3MMV99100WN Series . . . . . . . 71 Shaft and Housing Shoulder Dimensions (Ball Screw Bearings) . . . . 96
Light MM200K Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 BSBU D Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Light 2MM200WI and 3MM200WI Series . . . . . . . . . . . . . . . . . . . 77 BSBU Q Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
57
INTRODUCTION
58
3MM-WI types, manufactured with 25° contact angle, are for use on
applications where the loading on the bearings is predominately thrust — and
a high degree of axial rigidity is a definite requirement. Typical applications for
these are large vertical rotary surface grinders, horizontal and vertical disc
grinders, and thrust bearing applications for heavy duty lathes where the
bearings must directly carry extremely high tail stock or chucking pressure.
2MM-WO types with 15°-18° initial contact angle are designed for extremely
high-speed applications where centrifugal force of the balls is the principal
load on the bearing. Unlike the MM-WI type which has a low shoulder outer
2MM-WI &
ring, the 2MM-WO type has full shoulders on both sides of the outer race and
3MM-WI Types
a low shoulder on one side of the inner ring. This design permits assembly
with a maximum complement of balls and a one-piece cage which pilots
against the precision-ground lands of the outer ring. Generally this bearing
series is supplied with a separable inner ring and ball retaining cage along
with special race geometry for extremely high speed operation.
2MM-WN types with 15° initial contact angle are designed to meet the needs 1
of machine manufacturers who require optimum oil flow through the bearings.
This design incorporates a low shoulder on the non-thrust side of both the
inner and outer rings. The maximum complement of balls is separated by a
one-piece cage which pilots against the ground land of the outer ring. All
problems involving high-speed bearing applications for which this type is
being considered should be referred to Timken Engineering.
2MM-WO Types
2MMV and 3MMV 99100WN types are available with 15° or 25° contact
angle variations and have been developed to operate under the demanding
requirements of high speed machine tools. They incorporate design features
which permit operation at higher speed than standard angular contact ball
bearings. The bore, outside diameter, and width are the same as the
MM9100 series.
This series is designed to operate at rotational speeds 20% greater than
the MM9100 series, with no increase in operating temperature. The greatest
advantage of these series is at speeds greater than 500,000 DN (Bore in mm
x RPM). Silicon nitride balls (ceramic) and precision machined ball separators 2MM-WN Types
are available and, when used, the ultimate performance will be achieved.
2MMV99100 Types
Ball Screw Support Bearings
To meet the requirements of the servo-controlled machinery field, Fafnir has
developed a new series of ball bearings specially designed for ball screw
applications. Design criteria for these bearings with maximum axial rigidity,
low drag torque, and extreme control of lateral eccentricity.
These bearings are manufactured to ABEC-7 tolerances and are of the
nonseparable angular-contact type design with a 60° contact angle and
maximum complement of balls.These bearings are supplied prelubricated
with heavy duty grease NLGI #2 . Bearings are supplied packaged in DB
arrangement. However, they can be mounted in duplexed pairs and in
multiplexed sets in either Back-to-Back (DB), Face-to-Face (DF) or Tandem
(DT) arrangements. MM9300WI DUH (Inch)
Standard sizes are available and are stocked and packaged as duplex MM…BS…DUH (Metric)
pairs, triplex sets or quadruplex sets. These bearings are designed primarily
for ball screw applications and should not be considered in other areas such
as spindles or gear-box shafting without approval by Timken Engineering.
These bearings are offered in both standard inch and metric envelope
dimensions. TDC (Thin Dense Chrome) plating is the recommended option
for enhanced life, wear and corrosion resistance.
59
WI Construction:
This design incorporates a low shoulder on the non-thrust side of
the outer rings. The maximum complement of balls is separated
by a one-piece cage which is piloted against the ground thrust
shoulder land of the outer ring.
d D d D D D
d d
TO ORDER: Specify bearing number with prefix
2MM for 15° contact angle and 3MM
for 25° contact angle.
Example 2MM9300WI CR
in. mm in. µm in. mm in. µm in. mm in. µm in. mm Qty. (Dia.) in.
9310WI 1.9685 50 2.5 6 2.8346 72 3.0 7 0.4724 12 47 120 0.024 0.6 23 1⁄4
9311WI 2.1654 55 3.0 7 3.1496 80 3.0 7 0.5118 13 59 150 0.039 1.0 23 9⁄ 32
9312WI 2.3622 60 3.0 7 3.3465 85 3.0 8 0.5118 13 59 150 0.039 1.0 25 9⁄ 32
9313WI 2.5591 65 3.0 7 3.5433 90 3.0 8 0.5118 13 59 150 0.039 1.0 27 9⁄ 32
9314WI 2.7559 70 3.0 7 3.9370 100 3.0 8 0.6299 16 59 150 0.039 1.0 24 11⁄ 32
9315WI 2.9528 75 3.0 7 4.1339 105 3.0 8 0.6299 16 59 150 0.039 1.0 25 11⁄ 32
9316WI 3.1496 80 3.0 7 4.3307 110 3.0 8 0.6299 16 59 150 0.039 1.0 27 11⁄ 32
9317WI 3.3465 85 3.0 8 4.7244 120 3.0 8 0.7087 18 79 200 0.039 1.0 26 3⁄ 8
9318WI 3.5433 90 3.0 8 4.9213 125 3.5 9 0.7087 18 79 200 0.039 1.0 26 13⁄ 32
9319WI 3.7402 95 3.0 8 5.1181 130 3.5 9 0.7087 18 79 200 0.039 1.0 28 13⁄ 32
9320WI 3.9370 100 3.0 8 5.5118 140 3.5 9 0.7874 20 79 200 0.039 1.0 29 13⁄ 32
9322WI 4.3307 110 3.0 8 5.9055 150 3.5 9 0.7874 20 79 200 0.039 1.0 31 13⁄ 32
9324WI 4.7244 120 3.0 8 6.4961 165 4.0 10 0.8661 22 79 200 0.039 1.0 30 15⁄ 32
9326WI 5.1181 130 4.0 10 7.0866 180 4.0 10 0.9449 24 98 250 0.059 1.5 30 17⁄ 32
9328WI 5.5118 140 4.0 10 7.4803 190 4.5 11 0.9449 24 98 250 0.059 1.5 32 17⁄ 32
9330WI 5.9055 150 4.0 10 8.2677 210 4.5 11 1.1024 28 98 250 0.079 2.0 27 11⁄ 16
9332WI 6.2992 160 4.0 10 8.6614 220 4.5 11 1.1024 28 98 250 0.079 2.0 27 23⁄ 32
9334WI 6.6929 170 4.0 10 9.0551 230 4.5 11 1.1024 28 98 250 0.079 2.0 29 23⁄ 32
9340WI 7.8740 200 4.5 12 11.0236 280 5.0 13 1.4961 38 118 300 0.083 2.1 27 15⁄ 16
60
* Limits shown for a single row, spring preloaded and grease lubricated bearing.
61
BSF Ball Spin Frequency: The frequency at which a single BPFI Ball Pass Frequency Inner: The frequency at which a
defect on a rolling element will be detected. single defect in the inner race will be detected.
FREQUENCY COEFFICIENTS
Bearing FTF BSF BPFO BPFI FTF
Number
Fundamental Train Ball Spin Ball Pass Frequency Ball Pass Frequency Fundamental Train
Frequency Frequency Outer Inner Frequency
(Inner Rotation) (Outer Rotation)
62
Ultra-Light
9300WI Series
2MM9300WI 62,000 46,500 31,000 0.09 0.15 0.06 0.08 105,400 79,100 52,700
2MM9301WI
2MM9302WI
53,800
44,500
40,300
33,400
26,900
22,200
0.11
0.17
0.17
0.28
0.07
0.12
0.10
0.15
91,500
75,700
68,500
56,800
45,700
37,700 1
2MM9303WI 40,100 30,100 20,000 0.19 0.30 0.12 0.16 68,200 51,200 34,000
2MM9304WI 33,700 25,300 16,800 0.4 0.6 0.25 0.34 57,300 43,000 28,600
2MM9305WI 27,800 20,900 13,900 0.4 0.7 0.29 0.39 47,300 35,500 23,600
2MM9306WI 23,800 17,800 11,900 0.5 0.8 0.34 0.45 40,500 30,300 20,200
2MM9307WI 20,300 15,200 10,200 0.8 1.2 0.51 0.68 34,500 25,800 17,300
2MM9308WI 17,900 13,400 9,000 1.2 1.9 0.80 1.07 30,400 22,800 15,300
2MM9309WI 16,000 12,000 8,000 1.3 2.1 0.88 1.18 27,200 20,400 13,600
2MM9310WI 14,600 11,000 7,300 1.4 2.3 0.95 1.27 24,800 18,700 12,400
2MM9311WI 13,300 10,000 6,600 1.9 3.0 1.3 1.7 22,600 17,000 11,200
2MM9312WI 12,200 9,200 6,100 2.0 3.2 1.4 1.8 20,700 15,600 10,400
2MM9313WI 11,400 8,500 5,700 2.1 3.4 1.4 1.9 19,400 14,500 9,700
2MM9314WI 10,500 7,900 5,200 3.6 5.7 2.4 3.2 17,900 13,400 8,800
2MM9315WI 9,800 7,400 4,900 3.8 6.1 2.5 3.4 16,700 12,600 8,300
2MM9316WI 9,300 7,000 4,600 4.0 6.4 2.7 3.5 15,800 11,900 7,800
2MM9317WI 8,600 6,500 4,300 5.3 8.6 3.6 4.8 14,600 11,100 7,300
2MM9318WI 8,200 6,200 4,100 5.9 9.4 3.9 5.2 13,900 10,500 7,000
2MM9319WI 7,800 5,900 3,900 6.1 9.7 4.1 5.4 13,300 10,000 6,600
2MM9320WI 7,300 5,500 3,600 7.5 12.0 5.0 6.7 12,400 9,400 6,100
2MM9322WI 6,700 5,000 3,400 8.1 13.0 5.4 7.3 11,400 8,500 5,800
2MM9324WI 6,200 4,600 3,100 11.1 17.8 7.4 9.9 10,500 7,800 5,300
2MM9326WI 5,700 4,300 2,800 14.6 23.3 9.7 13.0 9,700 7,300 4,800
2MM9328WI 5,300 4,000 2,600 15.5 24.8 10.4 13.8 9,000 6,800 4,400
2MM9330WI 5,000 3,700 2,500 24.8 39.7 16.6 22.1 8,500 6,300 4,300
2MM9332WI 4,600 3,500 2,300 26.2 41.9 17.5 23.3 7,900 5,900 3,900
2MM9334WI 4,400 3,300 2,200 28.2 45.2 18.9 25.1 7,500 5,600 3,700
2MM9340WI 3,700 2,800 1,800 56.8 90.9 37.9 50.6 6,300 4,700 3,100
Notes: For 3MM (25 Degree Contact Angle) Spindle Bearings, use 90% of the Permissible Operating Speeds above.
* For 2MMC and 3MMC Spindle Bearings, use 120% of the Permissible Operating Speeds.
63
* DB (back-to-back) or DF (face-to-face) arrangement only; For other mounting arrangements, contact Timken Engineering.
64
Extra Light
MM9100K Series
d D
C
MM9100K
FREQUENCY COEFFICIENTS
FTF Fundamental Train Frequency: The frequency at which BPFO Ball Pass Frequency Outer: The frequency at which a
the retainer will operate. single defect in the outer race will be detected.
BSF Ball Spin Frequency: The frequency at which a single BPFI Ball Pass Frequency Inner: The frequency at which a
defect on a rolling element will be detected. single defect in the inner race will be detected.
65
d D d D D D
d d
To specify a ceramic
hybrid bearing, add
“C” to the part
number, after the
prefix that specifies
precision type. C (WIDTH) C (WIDTH) C (WIDTH)
C X2 X2 X2
Back-to-Back Face-to-Face Tandem
DB DF DT
WI Type Duplex Mounting Arrangements
2MM &
3MM in. mm in. µm in. mm in. µm in. mm in. µm in. mm Qty. (Dia.) in.
9110WI 1.9685 50 2.5 6 3.1496 80 3.0 7 0.6299 16 47 120 0.039 1.0 18 11⁄ 32
9111WI 2.1654 55 3.0 7 3.5433 90 3.0 8 0.7087 18 59 150 0.039 1.0 18 13⁄ 32
9112WI 2.3622 60 3.0 7 3.7402 95 3.0 8 0.7087 18 59 150 0.039 1.0 19 13⁄ 32
9113WI 2.5591 65 3.0 7 3.9370 100 3.0 8 0.7087 18 59 150 0.039 1.0 20 13⁄ 32
9114WI 2.7559 70 3.0 7 4.3307 110 3.0 8 0.7874 20 59 150 0.039 1.0 19 15⁄ 32
9115WI 2.9528 75 3.0 7 4.5276 115 3.0 8 0.7874 20 59 150 0.039 1.0 20 15⁄ 32
9116WI 3.1496 80 3.0 7 4.9213 125 3.5 9 0.8661 22 59 150 0.039 1.0 20 17⁄ 32
9117WI 3.3465 85 3.0 8 5.1181 130 3.5 9 0.8661 22 79 200 0.039 1.0 21 17⁄ 32
9118WI 3.5433 90 3.0 8 5.5118 140 3.5 9 0.9449 24 79 200 0.059 1.5 20 19⁄ 32
9119WI 3.7402 95 3.0 8 5.7087 145 3.5 9 0.9449 24 79 200 0.059 1.5 21 19⁄ 32
9120WI 3.9370 100 3.0 8 5.9055 150 3.5 9 0.9449 24 79 200 0.059 1.5 22 19⁄ 32
9121WI 4.1339 105 3.0 8 6.2992 160 4.0 10 1.0236 26 79 200 0.079 2.0 21 21⁄ 32
9122WI 4.3307 110 3.0 8 6.6929 170 4.0 10 1.1024 28 79 200 0.079 2.0 22 11⁄ 16
9124WI 4.7244 120 3.0 8 7.0866 180 4.0 10 1.1024 28 79 200 0.079 2.0 23 11⁄ 16
9126WI 5.1181 130 4.0 10 7.8740 200 4.5 11 1.2992 33 98 250 0.079 2.0 21 13⁄ 16
9128WI 5.5118 140 4.0 10 8.2677 210 4.5 11 1.2992 33 98 250 0.079 2.0 22 13⁄ 16
9130WI 5.9055 150 4.0 10 8.8583 225 4.5 11 1.3780 35 98 250 0.079 2.0 22 7⁄ 8
9132WI 6.2992 160 4.0 10 9.4488 240 4.5 11 1.4961 38 98 250 0.079 2.0 22 15⁄ 16
9134WI 6.6929 170 4.0 10 10.2362 260 5.0 13 1.6535 42 98 250 0.079 2.0 22 1 1⁄ 16
9136WI 7.0866 180 4.0 10 11.0236 280 5.0 13 1.8110 46 98 250 0.079 2.0 20 1 3⁄ 16
9140WI 7.8740 200 4.5 12 12.2047 310 5.0 13 2.0079 51 118 300 0.079 2.0 20 1 5⁄ 16
66
* Limits shown for a single row, spring preloaded and grease lubricated bearing.
** All ceramic hybrid bearing preloads are equivalent to the table above.
67
BSF Ball Spin Frequency: The frequency at which a single BPFI Ball Pass Frequency Inner: The frequency at which a
defect on a rolling element will be detected. single defect in the inner race will be detected.
FREQUENCY COEFFICIENTS
Bearing FTF BSF BPFO BPFI FTF
Number
Fundamental Train Ball Spin Ball Pass Frequency Ball Pass Frequency Fundamental Train
Frequency Frequency Outer Inner Frequency
(Inner Rotation) (Outer Rotation)
68
Extra-Light
9100WI Series
2MM9100WI 54,800 41,100 27,400 0.2 0.4 0.15 0.20 93,200 69,900 46,600
2MM9101WI 45,800 34,400 22,900 0.3 0.4 0.17 0.22 77,900 58,500 38,900
2MM9102WI 38,900 29,200 19,400 0.3 0.5 0.22 0.29 66,100 49,600 33,000
2MM9103WI 34,500 25,900 17,200 0.4 0.7 0.28 0.37 58,700 44,000 29,200
2MM9104WI
2MM9105WI
29,700
24,700
22,300
18,500
14,800
12,400
0.7
0.9
1.2
1.4
0.50
0.59
0.66
0.78
50,500
42,000
37,900
31,500
25,200
21,100
1
2MM9106WI 20,400 15,300 10,200 1.3 2.0 0.84 1.12 34,700 26,000 17,300
2MM9107WI 18,100 13,600 9,000 1.6 2.6 1.09 1.46 30,800 23,100 15,300
2MM9108WI 15,900 11,900 8,000 2.0 3.2 1.35 1.80 27,000 20,200 13,600
2MM9109WI 14,300 10,000 7,200 2.5 4.0 1.68 2.24 24,300 18,200 12,200
2MM9110WI 13,000 9,800 6,500 2.8 4.4 1.9 2.5 22,100 16,700 11,100
2MM9111WI 11,800 8,800 5,900 4.0 6.4 2.7 3.5 20,100 15,000 10,000
2MM9112WI 10,900 8,200 5,400 4.2 6.8 2.8 3.8 18,500 13,900 9,200
2MM9113WI 10,200 7,600 5,100 4.5 7.2 3.0 4.0 17,300 12,900 8,700
2MM9114WI 9,400 7,000 4,700 6.3 10.0 4.2 5.6 16,000 11,900 8,000
2MM9115WI 8,800 6,600 4,400 6.6 10.6 4.4 5.9 15,000 11,200 7,500
2MM9116WI 8,200 6,200 4,100 8.6 13.8 5.8 7.7 13,900 10,500 7,000
2MM9117WI 7,800 5,800 3,900 9.1 14.5 6.0 8.1 13,300 9,900 6,600
2MM9118WI 7,400 5,500 3,700 11.7 18.8 7.8 10.4 12,600 9,400 6,300
2MM9119WI 7,000 5,200 3,500 12.2 19.5 8.1 10.9 11,900 8,800 6,000
2MM9120WI 6,600 5,000 3,300 12.1 19.4 8.1 10.8 11,200 8,500 5,600
2MM9121WI 6,300 4,700 3,200 15.9 25.4 10.6 14.1 10,700 8,000 5,400
2MM9122WI 6,000 4,500 3,000 18.9 30.2 12.6 16.8 10,200 7,700 5,100
2MM9124WI 5,500 4,100 2,800 20.5 32.8 13.7 18.2 9,400 7,000 4,800
2MM9126WI 5,100 3,800 2,600 31.7 50.7 21.1 28.2 8,700 6,500 4,400
2MM9128WI 4,700 3,500 2,400 33.8 54.0 22.5 30.1 8,000 6,000 4,100
2MM9130WI 4,500 3,400 2,200 41.1 65.7 27.4 36.5 7,700 5,800 3,700
2MM9132WI 4,200 3,100 2,100 51.0 81.6 34.1 45.4 7,100 5,300 3,600
2MM9134WI 3,900 2,900 2,000 66.3 106.0 44.2 59.0 6,600 4,900 3,400
2MM9136WI 3,700 2,800 1,800 88.4 141.5 59.0 78.7 6,200 4,700 3,100
2MM9140WI 3,300 2,500 1,600 121.0 193.5 80.7 107.6 5,600 4,300 2,700
Notes: For 3MM (25 Degree Contact Angle) Spindle Bearings, use 90% of the Permissible Operating Speeds above.
* For 2MMC and 3MMC Spindle Bearings, use 120% of the Permissible Operating Speeds.
69
* DB (back-to-back) or DF (face-to-face) arrangement only; For other mounting arrangements, contact Timken Engineering.
* DB (back-to-back) or DF (face-to-face) arrangement only; For other mounting arrangements, contact Timken Engineering.
70
d D d D D D
d d
To specify a ceramic
hybrid bearing, add “C”
1
to the part number, after
the prefix that specifies
precision type.
2MMV &
3MMV in. mm in. µm in. mm in. µm in. mm in. µm in. mm Qty. (Dia.) in.
99116WN 3.1496 80 3.0 7 4.9213 125 3.5 9 0.8661 22 59 150 0.039 1.0 29 11⁄ 32
99117WN 3.3465 85 3.0 8 5.1181 130 3.5 9 0.8661 22 79 200 0.039 1.0 31 11⁄ 32
99118WN 3.5433 90 3.0 8 5.5118 140 3.5 9 0.9449 24 79 200 0.059 1.5 28 13⁄ 32
99119WN 3.7402 95 3.0 8 5.7087 145 3.5 9 0.9449 24 79 200 0.059 1.5 29 13⁄ 32
99120WN 3.9370 100 3.0 8 5.9055 150 3.5 9 0.9449 24 79 200 0.059 1.5 31 13⁄ 32
99121WN 4.1339 105 3.0 8 6.2992 160 4.0 10 1.0236 26 79 200 0.079 2.0 30 7⁄ 16
99122WN 4.3307 110 3.0 8 6.6929 170 4.0 10 1.1024 28 79 200 0.079 2.0 30 15⁄ 32
99124WN 4.7244 120 3.0 8 7.0866 180 4.0 10 1.1024 28 79 200 0.079 2.0 32 15⁄ 32
99126WN 5.1181 130 4.0 10 7.8740 200 4.5 11 1.2992 33 98 250 0.079 2.0 32 17⁄ 32
99128WN 5.5118 140 4.0 10 8.2677 210 4.5 11 1.2992 33 98 250 0.079 2.0 34 17⁄ 32
99130WN 5.9055 150 4.0 10 8.8583 225 4.5 11 1.3780 35 98 250 0.079 2.0 34 19⁄ 32
71
* Limits shown for a single row, spring preloaded and grease lubricated bearing.
** All ceramic hybrid bearing preloads are equivalent to the table above.
72
BSF Ball Spin Frequency: The frequency at which a single BPFI Ball Pass Frequency Inner: The frequency at which a
defect on a rolling element will be detected. single defect in the inner race will be detected.
FREQUENCY COEFFICIENTS
Bearing FTF BSF BPFO BPFI FTF
Number
Fundamental Train Ball Spin Ball Pass Frequency Ball Pass Frequency Fundamental Train
Frequency Frequency Outer Inner Frequency
(Inner Rotation) (Outer Rotation)
73
2MMV99101WN 68,200 60,600 45,500 0.3 0.5 0.20 0.27 116,000 103,000 77,400
2MMV99102WN 57,900 51,400 38,600 0.4 0.6 0.24 0.32 98,400 98,400 65,600
2MMV99103WN 51,200 45,500 34,100 0.5 0.7 0.31 0.41 87,100 87,100 58,000
2MMV99104WN 39,400 35,000 26,300 0.9 1.4 0.58 0.77 67,000 67,000 44,700
2MMV99105WN 32,900 29,200 21,900 1.0 1.6 0.67 0.90 55,800 55,800 37,200
2MMV99106WN 26,600 23,600 17,700 1.3 2.1 0.87 1.17 45,100 45,100 30,100
2MMV99107WN 22,800 20,200 15,200 1.4 2.2 0.91 1.22 38,700 38,700 25,800
2MMV99108WN 19,800 17,600 13,200 1.7 2.7 1.14 1.52 33,700 33,700 22,400
2MMV99109WN 18,200 16,200 12,100 2.2 3.5 1.47 1.96 30,900 30,900 20,600
2MMV99110WN 16,700 14,800 11,100 2.4 3.8 1.58 2.11 28,300 28,300 18,900
2MMV99111WN 14,900 13,300 10,000 3.4 5.4 2.2 3.0 25,400 25,400 17,000
2MMV99112WN 13,900 12,300 9,200 3.6 5.8 2.4 3.2 23,600 23,600 15,600
2MMV99113WN 13,000 11,500 8,600 3.8 6.1 2.6 3.4 22,000 22,000 14,600
2MMV99114WN 11,900 10,600 7,900 5.1 8.2 3.4 4.6 20,200 20,200 13,400
2MMV99115WN 11,100 9,800 7,400 5.5 8.8 3.7 4.9 18,800 18,800 12,600
2MMV99116WN 10,400 9,300 7,000 7.1 11.3 4.7 6.3 17,700 17,700 11,900
2MMV99117WN 9,900 8,800 6,600 7.4 11.8 4.9 6.6 16,800 16,800 11,200
2MMV99118WN 9,400 8,300 6,200 9.7 15.6 6.5 8.7 15,900 15,900 10,500
2MMV99119WN 8,900 7,900 5,900 13.3 21.3 7.1 9.5 15,100 15,100 10,000
2MMV99120WN 8,500 7,500 5,600 10.6 17.0 7.4 9.9 14,400 14,400 9,500
2MMV99121WN 8,000 7,100 5,300 17.1 27.4 9.1 12.2 13,600 13,600 9,000
2MMV99122WN 7,700 6,800 5,100 16.0 25.6 10.7 14.2 13,000 13,000 8,700
2MMV99124WN 7,100 6,300 4,700 17.1 27.4 11.4 15.3 12,100 12,100 8,000
2MMV99126WN 6,400 5,700 4,300 25.8 41.3 17.2 23.0 10,900 10,900 7,300
2MMV99128WN 5,900 5,300 4,000 27.5 43.9 18.3 24.4 10,100 10,100 6,800
2MMV99130WN 5,600 5,000 3,700 43.9 70.3 29.3 39.1 9,500 9,500 6,300
Notes:
For 3MM (25 Degree Contact Angle) Spindle Bearings, use 90% of the Permissible Operating Speeds above.
For 2MMVC and 3MMVC Spindle Bearings, use 120% of Permissible Operating Speeds.
74
* DB (back-to-back) or DF (face-to-face) arrangement only; For other mounting arrangements, contact Timken Engineering.
75
d D
DIMENSIONS – TOLERANCES
Bearing Bore Outside Diameter Width Fillet Wt. Load Ratings
(1)
Number d D C Radius Static Extended
tolerance tolerance Load Dynamic
+0.0000" +0.0000" Rating Load
+0.000 mm +0.000 mm +0.000",-0.005" CO Rating
to minus to minus +0.00 mm,-.13 mm CE
in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg lbs. N lbs. N
MM201K-CR 0.4724 12 0.00015 0.0038 1.2598 32 0.0002 0.005 0.3937 10 0.024 0.6 0.1 0.045 600 2650 1700 7500
MM202K-CR 0.5906 15 0.00015 0.0038 1.3780 35 0.0002 0.005 0.4331 11 0.024 0.6 0.12 0.054 720 3200 1900 8500
MM203K-CR 0.6693 17 0.00015 0.0038 1.5748 40 0.0002 0.005 0.4724 12 0.024 0.6 0.15 0.068 930 4150 2400 10600
MM204K-CR 0.7874 20 0.00015 0.0038 1.8504 47 0.0002 0.005 0.5512 14 0.039 1.0 0.25 0.113 1290 5700 3200 14300
MM205K-CR 0.9843 25 0.00015 0.0038 2.0472 52 0.0002 0.005 0.5906 15 0.039 1.0 0.3 0.136 1500 6800 3450 15600
MM206K-CR 1.1811 30 0.00015 0.0038 2.4409 62 0.0002 0.005 0.6299 16 0.039 1.0 0.5 0.227 2200 9800 4900 21600
MM207K-CR 1.3780 35 0.00020 0.0051 2.8346 72 0.0002 0.005 0.6693 17 0.039 1.0 0.7 0.318 3000 13200 6400 28500
MM208K-CR 1.5748 40 0.00020 0.0051 3.1496 80 0.0003 0.008 0.7087 18 0.039 1.0 0.9 0.408 3900 17300 8150 36000
MM209K-CR 1.7717 45 0.00020 0.0051 3.3465 85 0.0003 0.008 0.7480 19 0.039 1.0 0.96 0.435 4000 17600 8150 36000
MM210K-CR 1.9685 50 0.00020 0.0051 3.5433 90 0.0003 0.008 0.7847 20 0.039 1.0 1.05 0.476 4500 20000 8800 39000
MM211K-CR 2.1654 55 0.00020 0.0051 3.9370 100 0.0003 0.008 0.8268 21 0.059 1.5 1.5 0.68 5700 25500 10800 48000
MM212K-CR 2.3622 60 0.00020 0.0051 4.3307 110 0.0003 0.008 0.8661 22 0.059 1.5 1.9 0.862 6300 28000 12200 54000
MM213K-CR 2.5591 65 0.00020 0.0051 4.7244 120 0.0003 0.008 0.9055 23 0.059 1.5 2.35 1.066 7800 34500 14300 64000
MM214K-CR 2.7559 70 0.00020 0.0051 4.9213 125 0.0004 0.010 0.9449 24 0.059 1.5 2.5 1.134 8500 37750 15600 69500
MM215K-CR 2.9528 75 0.00020 0.0051 5.1181 130 0.0004 0.010 0.9843 25 0.059 1.5 2.7 1.225 8650 38000 15600 69500
MM216K-CR 3.1496 80 0.00020 0.0051 5.5118 140 0.0004 0.010 1.0236 26 0.079 2.0 3.1 1.406 10200 45500 18000 80000
(1)
Maximum shaft or housing fillet radius which bearing corners clear.
Two piece inner ring-piloted composition cage is standard.
CR - Outer ring-piloted composition cage.
FREQUENCY COEFFICIENTS
FTF Fundamental Train Frequency: The frequency at which BPFO Ball Pass Frequency Outer: The frequency at which a
the retainer will operate. single defect in the outer race will be detected.
BSF Ball Spin Frequency: The frequency at which a single BPFI Ball Pass Frequency Inner: The frequency at which a
defect on a rolling element will be detected. single defect in the inner race will be detected.
76
TO ORDER:
Specify prefix 2MM for 15° contact
angle. Example: 2MM202WI
Specify prefix 3MM for 25° contact
d D d D D D
angle. Example: 3MM202WI d d
200WI 0.3937 10 1.5 3.8 1.1811 30 2.0 5.1 0.3543 9 16 40 0.024 0.6 8 7 ⁄32
201WI 0.4724 12 1.5 3.8 1.2598 32 2.5 6.4 0.3937 10 31 80 0.024 0.6 9 15⁄ 64
202WI 0.5906 15 1.5 3.8 1.3780 35 2.5 6.4 0.4331 11 31 80 0.024 0.6 10 15 ⁄64
203WI 0.6693 17 1.5 3.8 1.5748 40 2.5 6.4 0.4724 12 31 80 0.024 0.6 10 17⁄ 64
204WI 0.7874 20 2.0 5.1 1.8504 47 2.5 6.4 0.5512 14 47 130 0.039 1.0 10 5⁄ 16
205WI 0.9843 25 2.0 5.1 2.0472 52 3.0 7.7 0.5906 15 47 130 0.039 1.0 12 5⁄ 16
206WI 1.1811 30 2.0 5.1 2.4409 62 3.0 7.7 0.6299 16 47 130 0.039 1.0 12 3⁄ 8
207WI 1.3780 35 2.5 6.4 2.8346 72 3.0 7.7 0.6693 17 47 130 0.039 1.0 12 7⁄ 16
208WI 1.5748 40 2.5 6.4 3.1496 80 3.0 7.7 0.7087 18 47 130 0.039 1.0 11 1⁄ 2
209WI 1.7717 45 2.5 6.4 3.3465 85 3.0 7.7 0.7480 19 47 130 0.039 1.0 13 1⁄ 2
210WI 1.9685 50 2.5 6.4 3.5433 90 3.0 7.7 0.7874 20 47 130 0.039 1.0 14 1⁄ 2
211WI 2.1654 55 3.0 7.7 3.9370 100 3.0 7.7 0.8268 21 59 150 0.059 1.5 14 9⁄ 16
212WI 2.3622 60 3.0 7.7 4.3307 110 3.0 7.7 0.8661 22 59 150 0.059 1.5 14 5⁄ 8
213WI 2.5591 65 3.0 7.7 4.7244 120 3.0 7.7 0.9055 23 59 150 0.059 1.5 14 21 ⁄32
214WI 2.7559 70 3.0 7.7 4.9213 125 3.5 9.0 0.9449 24 59 150 0.059 1.5 14 11⁄ 16
215WI 2.9528 75 3.0 7.7 5.1181 130 3.5 9.0 0.9843 25 59 150 0.059 1.5 15 11⁄ 16
216WI 3.1496 80 3.0 7.7 5.5118 140 3.5 9.0 1.0236 26 59 150 0.079 2.0 15 3⁄ 4
217WI 3.3465 85 3.0 7.7 5.9055 150 3.5 9.0 1.1024 28 79 200 0.079 2.0 15 13⁄ 16
218WI 3.5433 90 3.0 7.7 6.2992 160 4.0 10.3 1.1811 30 79 200 0.079 2.0 14 7⁄ 8
219WI 3.7402 95 3.0 7.7 6.6929 170 4.0 10.3 1.2598 32 79 200 0.079 2.1 14 15⁄ 16
220WI 3.9370 100 3.0 7.7 7.0866 180 4.0 10.3 1.3386 34 79 200 0.079 2.1 14 1
222WI 4.3307 110 3.0 7.7 7.8740 200 4.5 11.5 1.4961 38 79 200 0.079 2.1 14 1 1⁄ 8
224WI 4.7244 120 3.0 7.7 8.4646 215 4.5 11.5 1.5748 40 79 200 0.079 2.1 14 1 3⁄ 16
226WI 5.1181 130 4.0 10.3 9.0551 230 4.5 11.5 1.5748 40 98 250 0.098 2.5 17 1 3⁄ 16
230WI 5.9055 150 4.0 10.3 10.6299 270 5.0 12.8 1.7717 45 98 250 0.098 2.5 15 1 1⁄ 2
77
* Limits shown for a single row, spring preloaded and grease lubricated bearing.
** All ceramic hybrid bearing preloads are equivalent to the table above.
3MM200WI 0.07 0.030 640 2,800 1,600 7,100 56,500 — — 10 40 30 130 60 270
3MM201WI 0.08 0.036 830 3,700 1,960 8,700 51,000 — — 10 40 30 130 60 270
3MM202WI 0.10 0.044 980 4,400 2,120 9,400 43,000 — — 15 70 40 180 80 360
3MM203WI 0.14 0.064 1,270 5,600 2,600 11,600 37,700 — — 20 90 75 330 100 440
3MM204WI 0.23 0.103 1,730 7,700 3,550 15,800 32,100 — — 30 130 80 360 125 560
3MM205WI 0.28 0.127 2,200 9,800 4,050 18,000 26,800 — — 35 160 90 400 150 670
3MM206WI 0.43 0.195 3,150 14,000 5,600 24,900 22,600 — — 50 220 125 560 200 890
3MM207WI 0.62 0.282 4,300 19,100 7,350 32,700 19,400 30 130 70 310 175 780 300 1330
3MM208WI 0.78 0.352 5,100 22,700 9,000 40,000 17,400 35 160 80 360 200 890 300 1330
3MM209WI 0.90 0.408 6,200 27,600 10,000 44,500 15,800 40 180 100 440 250 1110 400 1780
3MM210WI 1.01 0.457 6,800 30,200 10,400 46,300 14,400 45 200 110 490 275 1220 450 2000
3MM211WI 1.34 0.608 8,650 38,500 12,900 57,400 13,100 50 220 140 620 350 1560 550 2450
3MM212WI 1.74 0.787 10,600 47,100 15,600 69,400 11,900 55 240 170 760 425 1890 650 2890
3MM213WI 2.20 0.998 11,800 52,500 17,000 75,600 10,900 60 270 190 850 475 2110 750 3340
3MM214WI 2.37 1.074 12,900 57,400 18,600 82,700 10,300 65 290 200 890 500 2220 800 3560
3MM215WI 2.59 1.174 14,000 62,300 19,300 85,800 9,700 80 360 220 980 550 2450 850 3780
3MM216WI 3.19 1.448 16,600 73,800 22,000 97,900 9,100 90 400 250 1110 625 2780 1000 4450
3MM217WI 4.01 1.817 19,300 85,800 26,000 115,600 8,500 100 440 270 1200 675 3000 1100 4890
3MM218WI 4.84 2.196 20,800 92,500 28,500 126,800 8,000 110 490 300 1330 700 3110 1250 5560
3MM219WI 5.88 2.669 24,000 106,800 32,000 142,300 7,600 125 560 350 1560 700 3110 1400 6230
3MM220WI 7.07 3.209 27,000 120,100 36,000 160,100 7,200 135 600 390 1730 780 3470 1560 6940
3MM222WI 9.89 4.486 34,500 153,500 42,500 189,000 6,500 155 690 460 2050 920 4082 1840 8180
3MM224WI 11.81 5.358 39,000 173,500 46,500 206,800 6,000 185 820 505 2250 1010 4480 2020 8980
3MM226WI 14.26 6.468 47,500 211,300 52,000 231,300 5,500 220 980 575 2560 1150 5120 2300 10230
3MM230WI 22.00 9.980 65,500 291,300 67,000 298,000 4,800 290 1290 700 3110 1400 6230 2800 12450
* Limits shown for a single row, spring preloaded and grease lubricated bearing.
** All ceramic hybrid bearing preloads are equivalent to the table above.
78
FTF Fundamental Train Frequency: The frequency at which BPFO Ball Pass Frequency Outer: The frequency at which a
the retainer will operate. single defect in the outer race will be detected.
BSF Ball Spin Frequency: The frequency at which a single BPFI Ball Pass Frequency Inner: The frequency at which a
defect on a rolling element will be detected. single defect in the inner race will be detected.
FREQUENCY COEFFICIENTS
Bearing FTF BSF BPFO BPFI FTF
Number
Fundamental Train Ball Spin Ball Pass Frequency Ball Pass Frequency Fundamental Train
Frequency Frequency Outer Inner Frequency
(Inner Rotation) (Outer Rotation)
79
Light
200WI Series
2MM200WI 50,200 37,700 25,100 0.3 0.5 0.20 0.27 85,300 64,100 42,700
2MM201WI 45,400 34,000 22,200 0.4 0.6 0.25 0.33 79,100 57,800 39,400
2MM202WI 38,200 28,700 19,100 0.5 0.8 0.32 0.43 66,300 48,800 33,200
2MM203WI 33,500 25,100 16,500 0.7 1.1 0.45 0.59 58,100 42,700 29,100
2MM204WI 28,600 21,400 14,300 1.1 1.7 0.72 0.96 48,600 36,400 24,300
2MM205WI 23,800 17,900 11,900 1.3 2.1 0.88 1.18 40,500 30,400 20,200
2MM206WI 20,000 15,100 10,000 2.0 3.1 1.31 1.74 34,200 25,600 17,000
2MM207WI 17,300 13,000 8,600 2.7 4.4 1.82 2.43 29,400 22,000 14,600
2MM208WI 15,400 11,600 7,700 3.7 6.0 2.49 3.32 26,200 19,700 13,100
2MM209WI 14,000 10,500 7,000 4.2 6.6 2.77 3.70 22,800 17,900 11,900
2MM210WI 12,500 9,600 6,400 4.8 7.6 3.2 4.3 21,800 16,300 10,900
2MM211WI 11,600 8,700 5,800 6.1 9.7 4.1 5.4 19,700 14,800 9,900
2MM212WI 10,600 7,920 5,300 7.5 12.0 5.0 6.7 18,000 13,500 9,000
2MM213WI 9,700 7,260 4,800 9.2 14.6 6.1 8.1 16,500 12,300 8,200
2MM214WI 9,100 6,840 4,600 10.6 16.9 7.0 9.4 15,500 11,600 7,800
2MM215WI 8,600 6,480 4,300 11.6 18.6 7.8 10.3 14,600 11,020 7,300
2MM216WI 8,100 6,060 4,000 13.7 22.0 9.2 12.2 13,800 10,300 6,800
2MM217WI 7,500 5,640 3,800 16.9 27.1 11.3 15.1 12,800 9,590 6,500
2MM218WI 7,100 5,340 3,600 21.5 34.4 14.4 19.1 12,100 9,080 6,100
2MM219WI 6,700 5,040 3,400 25.8 41.4 17.3 23.0 11,400 8,570 5,800
2MM220WI 6,400 4,800 3,200 30.7 49.1 20.5 27.3 10,900 8,160 5,400
2MM222WI 5,800 4,320 2,900 42.3 67.6 28.2 37.6 9,900 7,340 4,900
2MM224WI 5,400 4,020 2,700 51.4 82.3 34.3 45.8 9,200 6,830 4,600
2MM226WI 4,900 3,660 2,400 50.8 81.3 33.9 45.2 8,300 6,220 4,100
2MM230WI 4,200 3,180 2,160 82.4 131.9 55.0 73.4 7,100 5,410 3,600
Notes: For 3MM (25 Degree Contact Angle) Spindle Bearings, use 90% of the Permissible Operating Speeds above.
* For 2MMC and 3MMC Spindle Bearings, use 120% of the Permissible Operating Speeds.
80
* DB (back-to-back) or DF (face-to-face) arrangement only; For other mounting arrangements, contact Timken Engineering.
* DB (back-to-back) or DF (face-to-face) arrangement only; For other mounting arrangements, contact Timken Engineering.
81
Medium MM300K
d D d D
C
C
MM300K 2MM300WI
3MM300WI
DIMENSIONS – TOLERANCES
Bearing Bore Outside Width Fillet Wt. Load Raings
(1)
Number d Diameter C Radius Static Extended
D Load Dynamic
tolerance tolerance Rating Load
+0.0000" +0.000" +0.000,-.005" CO Rating
+0.000mm +0.000mm +0.00mm, -.13mm CE
to minus to minus to minus
MM305K-CR 0.9843 25 0.00015 0.0038 2.4409 62 0.0002 0.005 0.6693 17 0.039 1.0 0.52 0.236 2360 10400 6000 26000
MM306K-CR 1.1811 30 0.00015 0.0038 2.8346 72 0.0002 0.005 0.7480 19 0.039 1.0 0.78 0.354 3100 13700 7500 33500
MM307K-CR 1.3780 35 0.0002 0.0051 3.1496 80 0.0002 0.005 0.8268 21 0.059 1.5 1.01 0.458 3550 16000 8300 37500
MM308K-CR 1.5748 40 0.0002 0.0051 3.5433 90 0.0003 0.008 0.9055 23 0.059 1.5 1.42 0.644 5100 22400 11000 49000
MM309K-CR 1.7717 45 0.0002 0.0051 3.9370 100 0.0003 0.008 0.9843 25 0.059 1.5 1.9 0.862 7100 31300 13200 58500
MM310K-CR 1.9685 50 0.0002 0.0051 4.3307 110 0.0003 0.008 1.0630 27 0.059 1.5 2.48 1.125 7350 32500 15300 68000
MM311K-CR 2.1654 55 0.0002 0.0051 4.7244 120 0.0003 0.008 1.1417 29 0.079 2.0 3.14 1.424 8650 39000 18000 80000
MM312K-CR 2.3622 60 0.0002 0.0051 5.1181 130 0.0004 0.010 1.2205 31 0.079 2.0 3.89 1.765 11600 51100 20400 90000
MM313K-CR 2.5591 65 0.0002 0.0051 5.5118 140 0.0004 0.010 1.2992 33 0.079 2.0 4.78 2.168 13400 59000 23200 102000
MM314K-CR 2.7559 70 0.0002 0.0051 5.9055 150 0.0004 0.010 1.3780 35 0.079 2.0 5.77 2.617 15300 67400 26000 116000
(1)
Maximum shaft or housing fillet radius which bearing corners clear.
Two piece inner ring-piloted composition cage is standard.
CR - ring-piloted composition cage.
FREQUENCY COEFFICIENTS
FTF Fundamental Train Frequency: The frequency at which BPFO Ball Pass Frequency Outer: The frequency at which a
the retainer will operate. single defect in the outer race will be detected.
BSF Ball Spin Frequency: The frequency at which a single BPFI Ball Pass Frequency Inner: The frequency at which a
defect on a rolling element will be detected. single defect in the inner race will be detected.
82
Medium C
2MM300WI Series
3MM300WI Series
Superprecision MM:
Superprecision bearings are manufactured to a ABEC-7 (ISO P4) d D
tolerance class.
WI Construction:
This design incorporates a low shoulder on the non-thrust side of
the outer rings. The maximum complement of balls is separated
by a one-piece cage which is piloted against the ground land of
the outer ring.
2MM &
3MM in. mm in. µm in. mm in. µm in. mm in. µm in. mm Qty. (Dia.)in.
311WI 2.1654 55 3.0 7 4.7244 120 3.0 8 1.1417 29 59 150 0.079 2.0 10 13 ⁄ 16
312WI 2.3622 60 3.0 7 5.1181 130 3.5 9 1.2205 31 59 150 0.079 2.0 10 7⁄ 8
313WI 2.5591 65 3.0 7 5.5118 140 3.5 9 1.2992 33 59 150 0.079 2.0 11 15 ⁄ 16
314WI 2.7559 70 3.0 7 5.9055 150 3.5 9 1.3780 35 59 150 0.079 2.0 11 1
319WI 3.7402 95 3.0 7 7.8740 200 4.0 10 1.7717 45 79 200 0.118 3.0 10 1 3⁄ 8
83
d D
C
RADIAL LOAD RATING AT 33 1⁄ 3 RPM
PHYSICAL CHARACTERISTICS – LOAD RATINGS Based on 1500 hours L10 Life and Permissible Speed
Bearing Weight Static Extended Permis- Preload Levels **
Number Per Bearing Load Rating Dynamic sible
Load Ratings Speed
Ng *
Co Ce Extralight Light Medium Heavy
(DUX) (DUL) (DUM) (DUH)
2MM306WI 0.72 0.328 4,500 20,000 8,800 39,100 22,100 — — 40 180 100 440 175 780
2MM307WI 0.98 0.443 5,700 25,400 10,600 47,100 19,200 — — 50 220 125 560 225 1000
2MM308WI 1.34 0.608 7,200 32,000 12,900 57,400 16,900 — — 65 290 150 670 275 1220
2MM309WI 1.78 0.809 8,650 38,500 15,300 68,100 15,100 — — 75 330 175 780 350 1560
2MM310WI 2.31 1.046 10,400 46,300 18,000 80,100 13,600 — — 100 440 225 1000 400 1780
2MM311WI 2.94 1.332 12,200 54,300 20,800 92,500 12,400 — — 125 560 250 1110 475 2110
2MM312WI 3.67 1.665 14,300 63,600 23,600 105,000 11,400 — — 125 560 300 1330 550 2450
2MM313WI 4.63 2.101 18,000 80,100 28,500 126,800 10,500 — — 150 670 375 1670 675 3000
2MM314WI 5.62 2.548 20,800 92,500 32,000 142,300 9,800 — — 175 780 425 1890 775 3450
2MM319WI 12.32 5.587 35,500 157,900 47,500 211,300 7,400 — — 300 1330 700 3110 1400 6230
3MM301WI 0.13 0.061 1,040 4,600 2,450 10,900 42,800 — — 20 90 40 180 70 310
3MM302WI 0.19 0.087 1,270 5,600 2,600 11,600 34,300 — — 20 90 40 180 80 360
3MM303WI 0.23 0.104 1,600 7,100 3,800 16,900 33,100 — — 25 110 60 270 100 440
3MM304WI 0.30 0.137 2,160 9,600 4,800 21,400 29,000 — — 35 160 80 360 140 620
3MM305WI 0.49 0.221 3,350 14,900 6,800 30,200 23,600 — — 50 220 120 530 200 890
3MM306WI 0.72 0.328 4,300 19,100 8,500 37,800 19,900 — — 60 270 150 670 250 1110
3MM307WI 0.98 0.443 5,600 24,900 10,200 45,400 17,300 — — 80 360 190 850 350 1560
3MM308WI 1.34 0.608 6,950 30,900 12,500 55,600 15,200 — — 100 440 250 1110 400 1780
3MM309WI 1.78 0.808 8,500 37,800 14,600 64,900 13,600 — — 120 530 300 1330 500 2220
3MM310WI 2.30 1.045 10,000 44,500 17,300 77,000 12,200 — — 140 620 350 1560 600 2670
3MM311WI 2.93 1.331 11,800 52,500 20,000 89,000 11,200 — — 175 780 400 1780 700 3110
3MM312WI 3.67 1.663 13,700 60,900 22,800 101,400 10,300 — — 200 890 450 2000 800 3560
3MM313WI 4.63 2.099 17,300 77,000 27,500 122,300 9,500 — — 250 1110 600 2670 1000 4450
3MM314WI 5.61 2.546 20,000 89,000 31,000 137,900 8,800 — — 275 1220 650 2890 1150 5120
3MM319WI 12.30 5.581 34,000 151,200 45,500 202,400 6,700 — — 475 2110 1100 4890 2000 8900
84
Medium
2MM300WI Series
Superprecision Bearings
FTF Fundamental Train Frequency: The frequency at which BPFO Ball Pass Frequency Outer: The frequency at which a
the retainer will operate. single defect in the outer race will be detected.
BSF Ball Spin Frequency: The frequency at which a single BPFI Ball Pass Frequency Inner: The frequency at which a
defect on a rolling element will be detected. single defect in the inner race will be detected.
FREQUENCY COEFFICIENTS
Bearing Number FTF BSF BPFO BPFI FTF
Fundamental Train Ball Spin Ball Pass Frequency Ball Pass Frequency Fundamental Train
Frequency Frequency Outer Inner Frequency
(Inner Rotation) (Outer Rotation)
Medium
3MM300WI Series
FREQUENCY COEFFICIENTS
Bearing Number FTF BSF BPFO BPFI FTF
Fundamental Train Ball Spin Ball Pass Frequency Ball Pass Frequency Fundamental Train
Frequency Frequency Outer Inner Frequency
(Inner Rotation) (Outer Rotation)
85
Medium
300WI Series
2MM301WI 35,700 28,600 19,000 0.6 1.0 0.40 0.53 60,700 48,600 32,400
2MM302WI 28,600 22,900 15,200 0.7 1.2 0.49 0.65 48,600 38,900 25,900
2MM303WI 27,600 22,100 14,700 1.2 2.0 0.83 1.10 46,900 37,500 25,000
2MM304WI 24,200 19,300 12,900 1.5 2.5 1.03 1.38 41,100 32,800 21,900
2MM305WI 19,700 15,700 10,500 2.3 3.8 1.57 2.09 33,400 26,700 17,800
2MM306WI 16,600 13,300 8,800 3.5 5.6 2.35 3.14 28,200 22,500 15,000
2MM307WI 14,400 11,500 7,700 4.6 7.4 3.07 4.10 24,500 19,600 13,100
2MM308WI 12,700 10,100 6,800 6.4 10.2 4.25 5.66 21,500 17,200 11,500
2MM309WI 11,300 9,100 6,000 8.5 13.6 5.68 7.58 19,300 15,400 10,300
2MM310WI 10,200 8,200 5,400 11.1 17.8 7.4 9.9 17,300 13,900 9,200
2MM311WI 9,300 7,400 5,000 14.2 22.7 9.5 12.6 15,800 12,600 8,400
2MM312WI 8,600 6,800 4,600 17.7 28.3 11.8 15.8 14,500 11,600 7,800
2MM313WI 7,900 6,300 4,200 20.7 33.2 13.8 18.5 13,400 10,700 7,100
2MM314WI 7,400 5,900 3,900 25.2 40.3 16.8 22.4 12,500 10,000 6,700
2MM319WI 5,600 4,400 3,000 60.9 97.4 40.6 54.1 9,400 7,500 5,000
Notes: For 3MM (25 Degree Contact Angle) Spindle Bearings, use 90% of the Permissible Operating Speeds above.
* For 2MMC and 3MMC Spindle Bearings, use 120% of the Permissible Operating Speeds.
86
00 — — — 00 — — —
01 0.100 0.159 0.253 01 0.335 0.438 0.551
02 0.157 0.234 0.327 02 0.380 0.496 0.658
03 0.152 0.222 0.312 03 0.364 0.509 0.626
04 0.189 0.285 0.380 04 0.453 0.623 0.782
10
11
0.464
0.504
0.671
0.694
0.892
0.956
10
11
1.022
1.133
1.453
1.557
1.810
1.956
1
12 0.513 0.765 1.034 12 1.220 1.665 2.103
13 0.596 0.903 1.208 13 1.425 1.995 2.456
14 0.634 0.951 1.282 14 1.501 2.087 2.632
15 — — — 15 — — —
16 — — — 16 — — —
17 — — — 17 — — —
18 — — — 18 — — —
19 0.803 1.178 1.660 19 1.880 2.593 3.306
87
Width
C
HX Series
Outside
D
Bored Diameter
Fillet
Fillet Radius
Radius
2MM in. mm in. µm in. mm in. µm in. mm in. µm in. mm qty. (Dia.) in.
11
9100HX 0.3937 10 1.5 4 1.0236 26 2.0 5 0.3150 8 16 40 0.012 0.3 10 ⁄64
3
9101HX 0.4724 12 1.5 4 1.1024 28 2.0 5 0.3150 8 32 80 0.012 0.3 10 ⁄16
3
9102HX 0.5906 15 1.5 4 1.2598 32 2.5 6 0.3543 9 32 80 0.012 0.3 12 ⁄16
7
9103HX 0.6693 17 1.5 4 1.3780 35 2.5 6 0.3937 10 32 80 0.012 0.3 12 ⁄32
1
9104HX 0.7874 20 2.0 5 1.6535 42 2.5 6 0.4724 12 50 130 0.024 0.6 12 ⁄4
9
9105HX 0.9843 25 2.0 5 1.8504 47 2.5 6 0.4724 12 50 130 0.024 0.6 13 ⁄32
5
9106HX 1.1811 30 2.0 5 2.1654 55 3.0 7 0.5118 13 50 130 0.039 1.0 13 ⁄16
5
9107HX 1.3780 35 2.5 6 2.4409 62 3.0 7 0.5512 14 50 130 0.039 1.0 15 ⁄16
5
9108HX 1.5748 40 2.5 6 2.6772 68 3.0 7 0.5906 15 50 130 0.039 1.0 16 ⁄16
3
9109HX 1.7717 45 2.5 6 2.9528 75 3.0 7 0.6299 16 50 130 0.039 1.0 15 ⁄8
3
9110HX 1.9685 50 2.5 6 3.1496 80 3.0 7 0.6299 16 50 130 0.039 1.0 16 ⁄8
5
9111HX 2.1654 55 3.0 7 3.5433 90 3.0 8 0.7087 18 60 150 0.043 1.0 24 ⁄16
5
9112HX 2.3622 60 3.0 7 3.7402 95 3.0 8 0.7087 18 60 150 0.043 1.1 25 ⁄16
11
9113HX 2.5591 65 3.0 7 3.9370 100 3.0 8 0.7087 18 60 150 0.043 1.1 25 ⁄32
3
9114HX 2.7559 70 3.0 7 4.3307 110 3.0 8 0.7874 20 60 150 0.043 1.1 25 ⁄8
3
9115HX 2.9528 75 3.0 7 4.5276 115 3.0 8 0.7874 20 60 150 0.043 1.1 26 ⁄8
7
9116HX 3.1496 80 3.0 7 4.9213 125 3.5 9 0.8661 22 60 150 0.043 1.1 25 ⁄16
7
9117HX 3.3465 85 3.0 8 5.1181 130 3.5 9 0.8610 22 80 210 0.043 1.1 26 ⁄16
7
9118HX 3.5433 90 3.0 8 5.5118 140 3.5 9 0.9449 24 80 210 0.059 1.5 28 ⁄16
1
9119HX 3.7402 95 3.0 8 5.7087 145 3.5 9 0.9449 24 80 210 0.059 1.5 26 ⁄2
1
9120HX 3.9370 100 3.0 8 5.9055 150 3.5 9 0.9449 24 80 210 0.059 2.0 27 ⁄2
1
9121HX 4.1339 105 3.0 8 6.2992 160 4.0 10 1.0236 26 80 210 0.079 2.0 28 ⁄2
1
9122HX 4.3307 110 3.0 8 6.6929 170 4.0 10 1.1024 28 80 210 0.079 2.0 30 ⁄2
9
9124HX 4.7244 120 3.0 8 7.0866 180 4.0 10 1.1024 28 80 210 0.079 2.0 29 ⁄16
** Maximum shaft or housing fillet radius which bearing corners will clear
** ABMA std. 20 (ras max).
88
Extra-Light
2MMV9100HX Series RADIAL LOAD RATING AT 33 1⁄ 3 RPM
PHYSICAL CHARACTERISTICS – LOAD RATINGS Based on 1500 hours L10 Life and Permissible Speed
Bearing Weight Static Extended Dynamic Permis- Preload Levels **
Number Per Bearing Load Rating Load Rating sible
Co Ce Speed Light Medium Heavy
Ng * (DUL) (DUM) (DUH)
2MMV9105HX 0.16 0.073 1,140 5,100 2,850 12,700 41,800 10 40 30 130 60 270
2MMV9106HX 0.23 0.104 1,430 6,400 3,450 15,300 34,900 15 70 45 200 90 400
2MMV9107HX 0.32 0.145 1,730 7,700 3,750 16,700 29,800 15 70 45 200 90 400
2MMV9108HX 0.40 0.181 1,900 8,500 3,900 17,300 26,200 15 70 45 200 90 400
2MMV9109HX 0.48 0.218 2,500 11,100 5,200 23,100 23,900 20 90 60 270 120 530
2MMV9110HX 0.52 0.236 2,700 12,000 5,400 24,000 21,800 20 90 60 270 120 530
2MMV9111HX
2MMV9112HX
0.88
0.94
0.399
0.426
3,000
3,150
13,300
14,000
4,800
4,900
21,400
21,800
18,700
17,400
25
25
110
110
75
75
330
330
150
150
670
670
1
2MMV9113HX 0.98 0.445 3,800 16,900 5,850 26,000 16,400 30 130 90 400 180 800
2MMV9114HX 1.38 0.626 4,500 20,000 6,800 30,200 15,000 35 160 105 470 210 930
2MMV9115HX 1.45 0.658 4,650 20,700 6,950 30,900 14,200 35 160 105 470 210 930
2MMV9116HX 1.93 0.875 6,100 27,100 9,150 40,700 13,200 45 200 135 600 270 1200
2MMV9117HX 2.02 0.916 6,400 28,500 9,300 41,400 12,600 50 220 150 670 300 1330
2MMV9118HX 2.71 1.229 6,950 30,900 9,500 42,300 11,700 50 220 150 670 300 1330
2MMV9119HX 2.73 1.238 8,300 36,900 11,800 52,500 11,300 60 270 180 800 360 1600
2MMV9120HX 2.84 1.288 8,650 38,500 12,000 53,000 10,800 60 270 180 800 360 1600
2MMV9121HX 3.69 1.674 9,000 40,000 12,200 54,300 10,100 60 270 180 800 360 1600
2MMV9122HX 4.70 2.132 9,650 42,900 12,500 55,600 9,500 65 290 195 870 390 1730
2MMV9124HX 4.89 2.218 11,800 52,500 15,300 68,100 8,900 80 360 240 1070 480 2140
* Limits shown for a single row, spring preloaded and grease lubricated bearing.
** All ceramic hybrid bearing preloads are equivalent to the table above.
Extra-Light
2MMV9100HX Series
PERMISSIBLE OPERATING SPEEDS – RPM
2MMV9100HX Series
GREASE OIL
“DB” Mounting Grease Capacity Kluber Isoflex NBU 15 “DB” Mounting
15 Degree
Contact Angle (DUL) (DUM) (DUH) 25% 40% 15% 20% (DUL) (DUM) (DUH)
Light Medium Heavy (grams) (grams) (grams) (grams) Light Medium Heavy
2MMV9100HX 70,400 52,800 35,200 0.3 0.4 0.16 0.21 119,700 89,800 59,800
2MMV9101HX 63,100 47,300 31,600 0.3 0.5 0.18 0.24 107,300 80,400 53,700
2MMV9102HX 51,400 38,600 25,700 0.4 0.7 0.25 0.33 87,400 65,600 43,700
2MMV9103HX 47,100 35,300 23,600 0.6 0.9 0.33 0.44 80,100 60,000 40,100
2MMV9104HX 39,100 29,300 19,600 1.0 1.6 0.57 0.77 66,500 49,800 33,300
2MMV9105HX 33,400 25,100 16,700 1.2 1.9 0.70 0.93 56,800 42,700 28,400
2MMV9106HX 27,900 20,900 14,000 1.7 2.7 1.01 1.34 47,400 35,500 23,800
2MMV9107HX 23,800 17,900 11,900 2.1 3.4 1.25 1.67 40,500 30,400 20,200
2MMV9108HX 21,000 15,700 10,500 2.7 4.3 1.54 2.06 35,700 26,700 17,900
2MMV9109HX 19,100 14,300 9,600 3.5 5.6 2.12 2.83 32,500 24,300 16,300
2MMV9110HX 17,400 13,100 8,700 3.9 6.2 2.3 3.1 29,600 22,300 14,800
2MMV9111HX 15,000 11,200 7,500 4.6 7.3 2.5 3.3 25,500 19,000 12,800
2MMV9112HX 13,900 10,400 7,000 4.9 7.9 2.7 3.6 23,600 17,700 11,900
2MMV9113HX 13,100 9,800 6,600 5.5 8.8 3.1 4.1 22,300 16,700 11,200
2MMV9114HX 12,000 9,000 6,000 7.3 11.7 4.1 5.4 20,400 15,300 10,200
2MMV9115HX 11,400 8,500 5,700 7.7 12.4 4.3 5.7 19,400 14,500 9,700
2MMV9116HX 10,600 7,900 5,300 10.3 16.5 5.8 7.7 18,000 13,400 9,000
2MMV9117HX 10,100 7,600 5,000 10.8 17.3 6.1 8.1 17,200 12,900 8,500
2MMV9118HX 9,400 7,000 4,700 13.2 21.0 7.2 9.7 16,000 11,900 8,000
2MMV9119HX 9,000 6,800 4,500 14.6 23.4 8.3 11.1 15,300 11,600 7,700
2MMV9120HX 8,600 6,500 4,300 15.2 24.4 8.6 11.5 14,600 11,100 7,300
2MMV9121HX 8,100 6,100 4,000 18.3 29.3 10.2 13.6 13,800 10,400 6,800
2MMV9122HX 7,600 5,700 3,800 21.5 34.3 11.8 15.7 12,900 9,700 6,500
2MMV9124HX 7,100 5,300 3,600 24.4 39.1 13.7 18.3 12,100 9,000 6,100
Note: For 2MMVC and 3MMVC Spindle bearings, use 120% of Permissible Operating Speeds.
89
Extra-Light
2MMV9100HX Series
Frequency Coefficients Superprecision Bearings
90
Axial Stiffness
2MMV9100HX Series
(For Duplex Set *)
2MMV9100HX SERIES
Bore Light Medium Heavy
Number (106 lb/in.) (106 lb/in.) (106 lb/in.)
10
0.2122
0.2209
0.3268
0.3395
0.4396
0.4558
1
11 0.2960 0.4578 0.6183
12 0.3036 0.4689 0.6324
13 0.3329 0.5140 0.6930
14 0.3604 0.5561 0.7493
Radial Stiffness
2MMV9100HX Series
(For Duplex Set *)
2MMV9100HX SERIES
Bore Light Medium Heavy
Number (106 LB/IN.) (106 LB/IN.) (106 LB/IN.)
91
rable angular-contact type design with a 60° contact angle and maximum complement Quadruplex Mounting Duplex Mounting
of balls. These bearings are supplied prelubricated with heavy duty grease NLGI #2 .
Bearings are supplied packaged in DB arrangement. However, they can be mounted in applications and should not be considered in other areas such as spindles or
duplexed pairs and in multiplexed sets in either Back-to-Back (DB), Face-to-Face (DF) gear-box shafting without approval by Timken Engineering. These bearings are
or Tandem (DT) arrangements. offered in both standard inch and metric envelope dimensions. TDC (Thin
Standard sizes are available and are stocked and packaged as duplex pairs, triplex Dense Chrome) plating is the recommended option for enhanced life, wear and
sets or quadruplex sets. These bearings are designed primarily for ball screw corrosion resistance.
DUPLEX
in. mm in. mm in. mm in. mm in. mm in. mm lbs. kg
1
MM9306WI2H DUH 0.7874 20.000 0.00150 0.0038 1.8504 47.000 0.0002 0.005 1.2500 31.750 0.031 0.8 0.6 0.272
MM9308WI2H DUH 0.9385 23.838 0.00150 0.0038 2.4409 62.000 0.0002 0.005 1.2500 31.750 0.031 0.8 1.16 0.527
MM9310WI2H DUH 1.5000 38.100 0.00020 0.0050 2.8346 72.000 0.0002 0.005 1.2500 31.750 0.031 0.8 1.3 0.59
MM9311WI3H DUH 1.7510 44.475 0.00020 0.0050 3.0000 76.200 0.0002 0.005 1.2500 31.750 0.031 0.8 1.3 0.59
MM9313WI5H DUH 2.2500 57.150 0.00020 0.0050 3.5433 90.000 0.0003 0.008 1.2500 31.750 0.031 0.8 1.88 0.859
MM9316WI3H DUH 3.0000 76.200 0.00020 0.0050 4.3307 110.000 0.0003 0.008 1.2500 31.750 0.031 0.8 2.16 0.98
MM9321WI3 DUH 4.0000 101.600 0.00025 0.0064 5.7087 145.001 0.0003 0.008 1.7500 44.450 0.039 1.0 4.76 2.16
MM9326WI6H DUH 5.0000 127.000 0.00030 0.0075 7.0866 180.000 0.0004 0.010 1.7500 44.450 0.039 1.0 8.5 3.86
QUADRUPLEX
MM9306WI2H QUH 0.7874 20.000 0.00150 0.0038 1.8504 47.000 0.0002 0.005 2.5000 63.500 0.031 0.8 1.2 0.545
MM9308WI2H QUH 0.9385 23.838 0.00150 0.0038 2.4409 62.000 0.0002 0.005 2.5000 63.500 0.031 0.8 2.32 1.053
MM9310WI2H QUH 1.5000 38.100 0.00020 0.0050 2.8346 72.000 0.0002 0.005 2.5000 63.500 0.031 0.8 2.6 1.18
MM9311WI3H QUH 1.7510 44.475 0.00020 0.0050 3.0000 76.200 0.0002 0.005 2.5000 63.500 0.031 0.8 2.6 1.18
MM9313WI5H QUH 2.2500 57.150 0.00020 0.0050 3.5433 90.000 0.0003 0.008 2.5000 63.500 0.031 0.8 3.76 1.707
MM9316WI3H QUH 3.0000 76.200 0.00020 0.0050 4.3307 110.000 0.0003 0.008 2.5000 63.500 0.031 0.8 4.32 1.961
MM9321WI3 QUH 4.0000 101.600 0.00025 0.0064 5.7087 145.001 0.0004 0.010 3.5000 88.900 0.039 1.0 9.52 4.32
MM9326WI6H QUH 5.0000 127.000 0.00030 0.0075 7.0866 180.000 0.0004 0.010 3.5000 88.900 0.039 1.0 17 7.72
(1)
Maximum shaft or housing fillet radius which bearing corners clear.
DUPLEX
MM17BS47 DUH 0.6693 17 0.00016 0.004 1.8504 47 0.0002 0.005 1.1811 30 0.031 0.8 0.573 0.26
MM20BS47 DUH 0.7874 20 0.00016 0.004 1.8504 47 0.0002 0.005 1.1811 30 0.031 0.8 0.617 0.28
MM25BS62 DUH 0.9843 25 0.00016 0.004 2.4409 62 0.0002 0.005 1.1811 30 0.031 0.8 1.191 0.54
MM30BS62 DUH 1.1811 30 0.00016 0.004 2.4409 62 0.0002 0.005 1.1811 30 0.031 0.8 1.102 0.5
MM30BS72 DUH 1.1811 30 0.00016 0.004 2.8346 72 0.0002 0.005 1.1811 30 0.031 0.8 1.411 0.64
MM35BS72 DUH 1.3780 35 0.0002 0.005 2.8346 72 0.0002 0.005 1.1811 30 0.031 0.8 1.279 0.58
MM40BS72 DUH 1.5748 40 0.0002 0.005 2.8346 72 0.0002 0.005 1.1811 30 0.031 0.8 1.235 0.56
MM45BS75 DUH 1.7717 45 0.0002 0.005 2.9528 75 0.0002 0.005 1.1811 30 0.039 1.0 1.279 0.58
MM40BS90 DUH 1.5748 40 0.0002 0.005 3.5433 90 0.0003 0.008 1.1811 30 0.031 0.8 2.426 1.1
MM50BS90 DUH 1.9685 50 0.0002 0.005 3.5433 90 0.0003 0.008 1.1811 30 0.039 1.0 2.073 0.94
MM55BS90 DUH 2.1654 55 0.0002 0.005 3.5433 90 0.0003 0.008 1.1811 30 0.039 1.0 1.852 0.84
MM35BS100 DUH 1.3780 35 0.0002 0.005 3.9370 100 0.0003 0.008 1.5748 40 0.031 0.8 4.631 2.1
MM40BS100 DUH 1.5748 40 0.0002 0.005 3.9370 100 0.0003 0.008 1.5748 40 0.031 0.8 4.41 2
MM45BS100 DUH 1.7717 45 0.0002 0.005 3.9370 100 0.0003 0.008 1.5748 40 0.039 1.0 4.19 1.9
MM50BS100 DUH 1.9685 50 0.0002 0.005 3.9370 100 0.0003 0.008 1.5748 40 0.039 1.0 3.925 1.78
MM75BS110 DUH 2.9528 75 0.0002 0.005 4.3307 110 0.0003 0.008 1.1811 30 0.039 1.0 2.117 0.96
MM55BS120 DUH 2.1654 55 0.0002 0.005 4.7244 120 0.0003 0.008 1.5748 40 0.039 1.0 6.306 2.86
MM60BS120 DUH 2.3622 60 0.0002 0.005 4.7244 120 0.0003 0.008 1.5748 40 0.039 1.0 5.997 2.72
MM100BS150 DUH 3.9370 100 0.00024 0.006 5.9055 150 0.0004 0.010 1.7717 45 0.031 0.8 4.41 2
(1)
Maximum shaft or housing fillet radius which bearing corners clear.
93
DUPLEX
MM9306WI2H DUH 700 3110 4.3 750 3 0.034 5600 25000 5600 25000
MM17BS47 DUH
MM20BS47 DUH
MM9308WI2H DUH 1000 4450 6.0 1100 4 0.045 6550 29000 8000 35500
MM25BS62 DUH
MM30BS62 DUH
MM9310WI2H DUH 1400 6320 7.9 1390 5 0.056 8000 36000 10200 45500
MM30BS72 DUH
MM35BS72 DUH
MM40BS72 DUH
MM35BS100 DUH 2900 12,900 10.0 1760 2 0.28 15700 70500 21500 96000
MM40BS100 DUH
MM45BS100 DUH
MM50BS100 DUH
MM9311WI3H DUH 1500 6670 7.9 1390 5 0.56 8500 38000 11400 51000
MM9313WI5H DUH 1800 8010 9.4 1655 7 0.79 9150 40500 13700 61000
MM40BS90 DUH
MM50BS90 DUH
MM55BS90 DUH
MM9316WI3H DUH 2200 9790 11.9 2100 9 1.02 10000 44000 17300 76500
MM75BS110 DUH
MM9321WI3 DUH 4800 21350 14 2455 12 1.36 19000 85000 34000 150000
MM9326WI6H DUH 6000 26690 18.0 3150 23 2.27 20600 91600 42000 186000
MM55BS120DUH 3500 15570 12.0 2150 6 0.68 18000 80800 26400 117800
MM60BS120 DUH
MM100BS150 DUH 4800 21350 16.4 2900 10 1.09 19400 86400 33800 151300
QUADRUPLEX
MM9306WI2H QUH 1400 6230 8.6 1500 6 0.068 11200 50000 11200 50000
MM17BS47 QUH
MM20BS47 QUH
MM9308WI2H QUH 2000 8900 12 2200 8 0.9 13100 58000 16000 71000
MM25BS62 QUH
MM30BS62 QUH
MM9310WI2H QUH 2800 12450 14.4 2465 10 1.12 16000 72000 20400 91000
MM30BS72 QUH
MM35BS72 QUH
MM40BS72 QUH
MM35BS100 QUH 5800 25800 20.0 3520 4 0.56 43000 192000 31400 141000
MM40BS100 QUH
MM45BS100 QUH
MM50BS100 QUH
MM9311WI3H QUH 3000 13340 15.8 2780 10 1.12 17000 76000 22800 102000
MM9313WI5H QUH 3600 16010 18.8 3310 14 1.58 18300 81000 27400 122000
MM40BS90 QUH
MM50BS90 QUH
MM55BS90 QUH
MM9316WI3H QUH 4400 19570 23.8 4200 18 2.04 20000 88000 34600 153000
MM75BS110 QUH
MM9321WI3 QUH 9600 42700 28.4 4910 24 2.72 38000 170000 68000 300000
MM9326WI6H QUH 12000 53380 36.0 6300 40 4.5 41200 183200 84000 372000
MM55BS120 QUH 7000 31140 24.0 4300 12 1.36 36000 161600 52800 235600
MM60BS120 QUH
MM100BS150 QUH 9600 42700 32.8 6720 20 2.18 38800 172800 67600 302600
94
MM17BS47 0.66929 17.000 0.66917 16.991 1.8504 47.000 1.8507 47.008 MM45BS75 1.7716 45.000 1.7714 44.995 2.9527 75.000 2.9531 75.008
0.66913 16.996 0.66897 16.992 1.8502 46.995 1.8504 47.000 1.7714 44.995 1.7712 44.990 2.9525 74.995 2.9527 75.000
MM20BS47 0.7874 20.000 0.78728 19.997 1.8504 47.000 1.8507 47.008 MM45BS100 1.7716 45.000 1.7714 44.995 3.937 100.000 3.9374 100.010
0.78725 19.996 0.78708 19.992 1.8502 46.995 1.8504 47.000 1.7714 44.995 1.7712 44.990 3.9366 99.992 3.937 100.000
MM25BS62 0.98425 25.000 0.98413 24.997 2.4409 62.000 2.4412 62.008 MM50BS90 1.9685 50.000 1.9683 49.995 3.5433 90.000 3.5436 90.008
0.98409 24.996 0.98393 24.992 2.4407 61.995 2.4409 62.000 1.9683 49.995 1.9681 49.990 3.5429 89.992 3.5433 90.000
MM30BS62 1.1811 30.000 1.1809 29.997 2.4409 62.000 2.4412 62.008 MM50BS100 1.9685 50.000 1.9683 49.995 3.937 100.000 3.9374 100.010
1.1809 29.996 1.1807 29.992 2.4407 61.995 2.4409 62.000 1.9683 49.995 1.9681 44.990 3.9366 99.992 3.937 100.000
MM30BS72 1.1811 30.000 1.1809 29.997 2.8346 72.000 2.8349 72.008 MM55BS90 2.1653 55.000 2.1651 54.995 3.5433 90.000 3.5436 90.008
1.1809 29.996 1.1807 29.992 2.8344 71.995 2.8346 72.000 2.1651 54.995 2.1649 54.990 3.5429 89.992 3.5433 90.000
MM35BS72 1.3779 35.000 1.3777 34.995 2.8346 72.000 2.8349 72.008 MM55BS120 2.1653 55.000 2.1651 54.995 4.7244 120.000 4.7248 120.010
1.3777 34.995 1.3775 34.990 2.8344 71.995 2.8346 72.000 2.1651 54.995 2.1649 54.990 4.7241 119.992 4.7244 120.000
MM35BS100 1.3779 35.000 1.3777 34.995 3.9370 100.000 3.9374 100.010 MM60BS120 2.3622 60.000 2.3620 59.995 4.7244 120.000 4.7248 120.010
1.3777 34.995 1.3775 34.990 3.9366 99.992 3.9370 100.000 2.3620 59.995 2.3618 59.990 4.7241 119.992 4.7244 120.000
MM40BS72 1.5748 40.000 1.5746 39.995 2.8346 72.000 2.8349 72.008 MM75BS110 2.9527 75.000 2.9525 74.995 4.3307 110.000 4.3311 110.010
1.5746 39.995 1.5744 39.990 2.8344 71.995 2.8346 72.000 2.9525 74.995 2.9522 74.987 4.3304 109.992 4.3307 110.000
MM40BS90 1.5748 40.000 1.5746 39.995 3.5433 90.000 3.5436 90.008 MM100BS150 3.9370 100.000 3.9368 99.995 5.9055 150.000 5.9059 150.010
1.5746 39.995 1.5744 39.990 3.5429 89.992 3.5433 90.000 3.9367 99.940 3.9364 99.987 5.9051 149.990 5.9055 150.000
MM40BS100 1.5748 40.000 1.5746 39.995 3.9370 100.000 3.9374 100.010
1.5746 39.995 1.5744 39.990 3.9366 99.992 3.9370 100.000
95
MM17BS47 0.905 23.00 1.634 41.5 0.031 0.8 MM45BS75 2.047 52.00 2.717 69.00 0.03 1.0
MM20BS47 1.024 26.00 1.634 41.5 0.031 0.8 MM45BS100 2.126 54.00 3.543 90.00 0.03 1.0
MM25BS62 1.378 35.00 2.205 56.0 0.031 0.8 MM50BS90 2.323 59.00 3.228 82.00 0.03 1.0
MM30BS62 1.575 40.00 2.205 56.0 0.031 0.8 MM50BS100 2.323 59.00 3.543 90.00 0.03 1.0
MM30BS72 1.575 40.00 2.205 56.0 0.031 0.8 MM55BS90 2.48 63.00 3.228 82.00 0.03 1.0
MM35BS72 1.653 42.00 2.520 64.0 0.031 0.8 MM55BS120 2.559 65.00 4.331 110.00 0.03 1.0
MM35BS100 1.653 42.00 3.543 90.0 0.031 0.8 MM60BS120 2.756 70.00 4.331 110.00 0.03 1.0
MM40BS72 1.850 47.00 2.520 64.0 0.031 0.8 MM75BS110 3.307 84.00 4.016 102.00 0.03 1.0
MM40BS90 1.850 47.00 3.228 82.0 0.031 0.8 MM100BS150 4.331 110.00 5.433 138.00 0.03 1.0
MM40BS100 1.850 47.00 3.543 90.0 0.031 0.8
96
R
NI
surface perpendicular to the ball screw axis.
FAF
D
These units combine the features of MM-BS-DU (Duplex) ball D1
d d3
D2
screw bearings with an accurately manufactured housing and D3
laminar ring seals.
Each unit is prepacked with a measured quantity of high quality 45° 80 BU
BS
30 D
bearing grease and requires no further lubrication.
Units are supplied with the bearings in pairs or quad sets
mounted in the “DB” (“O”) arrangement. Other bearing arrangements
A
K L
can be accommodated if required and in these cases please contact 30° 0.0004 A E
us with details of your requirements.
C
Consult Timken Engineering for recommended shaft and
housing fits. 1
STANDARD SERIES – Dimensional Tolerances ± 0.005" (± .13 mm) unless otherwise stated.
Shaft Unit C d d1 d2 d3 D D1 D2 D3 E F K L N P Wt.
Diam. Number
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm kg
17 BSBU17D60 1.85 0.6693 0.17 0.26 1.42 2.3622 1.02 2.52 3.54 1.742 1.67 1.26 0.51 2.99 1.26 2.42
0.6691 2.3617 1.702
47.0 17.000 4.3 6.6 36.0 60.000 26.0 64.0 90.0 44.26 42.5 32.0 13.0 76.0 32.0 1.1
16.996 59.987 43.24
20 BSBU20D60 1.85 0.7874 0.17 0.26 1.42 2.3622 1.02 2.52 3.54 1.742 1.67 1.26 0.51 2.99 1.26 2.42
0.7872 2.3617 1.702
47.0 20.000 4.3 6.6 36.0 60.000 26.0 64.0 90.0 44.26 42.5 32.0 13.0 76.0 32.0 1.1
19.996 59.987 43.24
25 BSBU25D80 2.05 0.9842 0.17 0.36 1.97 3.1496 1.57 3.46 4.72 1.979 2.34 1.26 0.59 4.02 1.73 5.06
0.9841 3.1491 1.938
52.0 25.000 4.3 9.2 50.0 80.000 40.0 88.0 120.0 50.26 59.5 32.0 15.0 102.0 44.0 2.3
24.996 79.987 49.24
30 BSBU30D80 2.05 1.1811 0.17 0.36 1.97 3.1496 1.57 3.46 4.72 1.979 2.34 1.26 0.59 4.02 1.73 4.84
1.1809 3.1491 1.938
52.0 30.000 4.3 9.2 50.0 80.000 40.0 88.0 120.0 50.26 59.5 32.0 15.0 102.0 44.0 2.2
29.996 79.987 49.24
35 BSBU35D90 2.05 1.378 0.17 0.36 2.36 3.5433 1.81 3.86 5.12 1.979 2.62 1.26 0.59 4.45 1.93 7.04
1.3778 3.5427 1.938
52.0 35.000 4.3 9.2 60 90.000 46 98 130 50.26 66.5 32.0 15.0 113.0 49 3.2
34.995 89.985 49.24
40 BSBU40D90 2.05 1.5748 0.17 0.36 2.36 3.5433 1.81 3.86 5.12 1.979 2.62 1.26 0.59 4.45 1.93 6.82
1.5746 3.5427 1.938
52.0 40.000 4.3 9.2 60.0 90.000 46.0 98 130.0 50.26 66.5 32.0 15.0 113.0 49 3.1
39.995 89.985 49.24
40 BSBU40D124 2.6 1.5748 0.21 0.45 2.99 4.8819 2.6 5.04 6.5 2.530 3.54 1.71 0.67 5.75 2.52 13.42
1.5746 4.8812 2.490
66.0 40.000 5.3 11.4 76.0 124.000 66.0 128 165.0 64.26 90.0 43.5 17.0 146.0 64.0 6.1
39.995 123.982 63.24
45 BSBU45D124 2.6 1.7716 0.21 0.45 2.99 4.8819 2.6 5.04 6.5 2.530 3.54 1.71 0.67 5.75 2.52 13.2
1.7714 4.8812 2.490
66.0 45.000 5.3 11.4 76.0 124.000 66.0 128 165.0 64.26 90.0 43.5 17.0 146.0 64.0 6.0
44.995 123.982 63.24
50 BSBU50D124 2.6 1.9685 0.21 0.45 2.99 4.8819 2.6 5.04 6.5 2.530 3.54 1.71 0.67 5.75 2.52 12.898
1.9683 4.8812 2.490
66.0 50.000 5.3 11.4 76.0 124.000 66.0 128 165.0 64.26 90.0 43.5 17.0 146.0 64.0 5.9
49.995 123.982 63.24
97
R
NI
Consult Timken Engineering for recommended shaft and
FAF
D
housing fits. D1
d d3
D2
D3
BS
45° 80 BU
30 Q
A
K L
30° 0.0004 A E
STANDARD SERIES – Dimensional Tolerances ± 0.005" (± .13 mm) unless otherwise stated
Shaft Unit C d d1 d2 d3 D D1 D2 D3 E F K L N P Wt.
Diam. Number
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm kg
17 BSBU17Q60 3.03 0.6693 0.17 0.26 1.42 2.3622 1.02 2.52 3.54 2.924 1.67 1.26 0.51 2.99 1.26 3.74
0.6690 2.3617 2.864
77.0 17.000 4.3 6.6 36.0 60.000 26.0 64.0 90.0 74.26 42.5 32.0 13.0 76.0 32.0 1.7
16.993 59.987 72.74
20 BSBU20Q60 3.03 0.7874 0.17 0.26 1.42 2.3622 1.02 2.52 3.54 2.924 1.67 1.26 0.51 2.99 1.26 3.74
0.7872 2.3617 2.864
77.0 20.000 4.3 6.6 36.0 60.000 26.0 64.0 90.0 74.26 42.5 32.0 13.0 76.0 32.0 1.7
19.996 59.987 72.74
25 BSBU25Q80 3.23 0.9842 0.17 0.36 1.97 3.1496 1.57 3.46 4.72 3.160 2.34 1.26 0.59 4.02 1.73 7.7
0.9841 3.1491 3.100
82.0 25.000 4.3 9.2 50.0 80.000 40.0 88.0 120.0 80.26 59.5 32.0 15.0 102.0 44.0 3.5
24.996 79.987 78.74
30 BSBU30Q80 3.23 1.1811 0.17 0.36 1.97 3.1496 1.57 3.46 4.72 3.160 2.34 1.26 0.59 4.02 1.73 7.48
1.1809 3.1491 3.100
82.0 30.000 4.3 9.2 50.0 80 40.0 88.0 120.0 80.26 59.5 32.0 15.0 102.0 44.0 3.4
29.995 79.987 78.74
35 BSBU35Q90 3.23 1.3780 0.17 0.36 2.36 3.5433 1.81 3.86 5.12 3.160 2.62 1.26 0.59 4.45 1.93 10.12
1.3778 3.5427 3.100
82.0 40.000 4.3 9.2 60 90.000 46 98 130 80.26 66.5 32.0 15.0 113.0 49 4.6
39.000 89.985 78.74
40 BSBU40Q90 3.23 1.5748 0.17 0.36 2.36 3.5433 1.81 3.86 5.12 3.160 2.62 1.26 0.59 4.45 1.93 9.9
1.5746 3.5427 3.100
82.0 40.000 4.3 9.2 60.0 90.000 46.0 98 130.0 80.26 66.5 32.0 15.0 113.0 49 4.5
39.995 89.985 78.74
40 BSBU40Q124 4.17 1.5748 0.21 0.45 2.99 4.8819 2.6 5.04 6.5 4.105 3.54 1.71 0.67 5.75 2.52 21.34
1.5746 4.8812 4.045
106.0 40.000 5.3 11.4 76.0 124.000 66.0 128 165.0 104.26 90.0 43.5 17.0 146.0 64.0 9.7
39.995 123.982 102.74
45 BSBU45Q124 4.17 1.7716 0.21 0.45 2.99 4.8819 2.6 5.04 6.5 4.105 3.54 1.71 0.67 5.75 2.52 20.9
1.7714 4.8812 4.045
106.0 45.000 5.3 11.4 76.0 124.000 66.0 128 165.0 104.26 90.0 43.5 17.0 146.0 64.0 9.5
44.995 123.982 102.74
50 BSBU50Q124 4.17 1.9685 0.21 0.45 2.99 4.8819 2.6 5.04 6.5 4.105 3.54 1.71 0.67 5.75 2.52 20.46
1.9683 4.8812 4.045
106.0 50.000 5.3 11.4 76.0 124.000 66.0 128 165.0 104.26 90.0 43.5 17.0 146.0 64.0 9.3
49.995 123.982 102.74
98
BSPB D
G G C
H H E
0.0004 A 0.0004 A
0.0004 A 0.0004 AB
Standard and Heavy Duty Bearings B
The BSPB D series is a design of bearing pillow block unit for ball screw 0.0004 A
applications. J CENTER HEIGHT
D d
d4
The unit incorporates similar features to the BSBU D series but is
designed to bolt down onto a flat surface, parallel to the ball screw axis. K N
1 X 45°
In the standard unit, pilot holes for dowels are provided. Units with L
FOOT HEIGHT
finished holes for dowels can be supplied by special order if required. H
4 HOLES
EQUISPACED ON
'd1'
H
A
'F' P.C. DIA.
Consult Timken Engineering for recommended shaft and housing fits.
4 HOLES 'd3'
0.0008
S
R
P 2 HOLES 'd2'
0.0008
17 BSPB17D32 1.850 0.6693 0.17 0.31 0.35 1.42 1.02 1.742 1.67 1.8504 0.67 2.44 1.26 0.04 1.2598 1.50 0.87 0.35 0.33 3.37 3.3
1.848 0.6691 1.702 1.8499 1.2593
47.000 17.000 4.3 7.8 9.0 36.0 26.0 44.26 42.5 47.000 17 62 32.0 1.0 32.000 38.0 22.0 9.0 8.5 85.5 1.5
46.950 16.996 43.24 46.987 31.987
20 BSPB20D32 1.850 0.7874 0.17 0.31 0.35 1.42 1.02 1.742 1.67 1.8504 0.67 2.44 1.65 0.04 1.2598 1.50 0.87 0.35 0.33 3.37 3.3
1.848 0.7872 1.702 1.8499 1.2593
47.000 20.000 4.3 7.8 9.0 36.0 26.0 44.26 42.5 47.000 17 62 42.0 1.0 32.000 38.0 22.0 9.0 8.5 85.5 1.5
46.950 19.996 43.24 46.987 31.987
25 BSPB25D42 2.047 0.9842 0.17 0.39 0.43 1.97 1.57 1.979 2.34 2.4606 0.79 3.35 1.65 0.04 1.6535 1.65 0.98 0.39 0.39 4.53 6.16
2.045 0.9841 1.938 2.4601 1.6530
52.000 25.000 4.3 9.8 11.0 50.0 40.0 50.26 59.5 62.500 20 85 42.0 1.0 42.000 42.0 25.0 10.0 10.0 115.0 2.8
51.950 24.996 49.24 62.487 41.987
30 BSPB30D42 2.047 1.1811 0.17 0.39 0.43 1.97 1.57 1.979 2.34 2.4606 0.79 3.35 1.97 0.04 1.6535 1.65 0.98 0.39 0.39 4.53 5.94
2.045 1.1809 1.938 2.4601 1.6530
52.000 30.000 4.3 9.8 11.0 50.0 40.0 50.26 59.5 62.500 20 85 50.0 1.0 42.000 42.0 25.0 10.0 10.0 115.0 2.7
51.920 29.996 49.24 62.487 41.987
35 BSPB35D50 2.047 1.378 0.17 0.51 0.51 2.36 1.81 1.979 2.62 2.6772 0.81 3.74 1.97 0.04 1.9685 1.65 0.98 0.39 0.39 4.96 8.36
2.045 1.3778 1.938 2.6767 1.9680
52.000 35.000 4.3 13.0 13.0 60.0 46.0 50.26 66.5 68.000 20.5 95 50.0 1.0 50.000 42.0 25.0 10.0 10.0 126.0 3.8
51.950 34.995 49.24 67.987 49.987
40 BSPB40D50 2.047 1.5748 0.17 0.51 0.51 2.36 1.81 1.979 2.62 2.6772 0.81 3.74 1.26 0.04 1.9685 1.65 0.98 0.39 0.39 4.96 8.14
2.045 1.5746 1.938 2.6767 1.9680
52.000 40.000 4.3 13.0 13.0 60.0 46.0 50.26 66.5 68.000 20.5 95 32.0 1.0 50.000 42.0 25.0 10.0 10.0 126.0 3.7
51.950 39.995 49.24 67.987 49.987
40 BSPB40D65 2.598 1.5748 0.21 0.46 0.71 2.99 2.6 2.530 3.54 3.7402 1.18 5.12 2.56 0.04 2.5590 2.09 1.26 0.51 0.59 6.89 20.9
2.596 1.5746 2.490 3.7396 2.5585
66.000 40.000 5.3 11.8 18.0 76.0 66.0 64.26 90.0 95.000 30.0 130.0 65 1.0 65.000 53.0 32.0 13.0 15.0 175.0 9.5
65.950 39.995 63.24 94.987 64.987
45 BSPB45D65 2.598 1.7716 0.21 0.46 0.71 2.99 2.6 2.530 3.54 3.7402 1.18 5.12 2.56 0.04 2.5590 2.09 1.26 0.51 0.59 6.89 20.46
2.596 1.7714 2.490 3.7396 2.5585
66.000 45.000 5.3 11.8 18.0 76.0 66.0 64.26 90.0 95.000 30.0 130.0 65 1.0 65.000 53.0 32.0 13.0 15.0 175.0 9.3
65.950 44.995 63.24 94.987 64.987
50 BSPB50D65 2.598 1.9685 0.21 0.46 0.71 2.99 2.6 2.530 3.54 3.7402 1.18 5.12 2.56 0.04 2.5590 2.09 1.26 0.51 0.59 6.89 20.02
2.596 1.9683 2.490 3.7396 2.5585
66.000 50.000 5.3 11.8 18.0 76.0 66.0 64.26 90.0 95.000 30.0 130.0 65 1.0 65.000 53.0 32.0 13.0 15.0 175.0 9.1
65.950 49.995 63.24 94.987 64.987
99
G G C
0.0004
A
A
H H
0.0004 A E
0.0004 AB
Standard and Heavy Duty Bearings B
0.0004 A
The BSPB Q series is similar in design and features to the BSPB D J CENTER HEIGHT
1 X 45°
L
FOOT HEIGHT
H
4 HOLES
EQUISPACED ON
'd1'
H
A
'F' P.C. DIA.
4 HOLES 'd3'
0.0008
S
R
P 2 HOLES 'd2'
0.0008
T
U
STANDARD SERIES – Dimensional Tolerances ± 0.005" (± .13 mm) unless otherwise stated
Shaft Unit C d d1 d2 d3 d4 D E F G H J K L N P R S T U Wt.
Diam. Number
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm kg
17 BSPB17Q32 3.031 0.6693 0.17 0.31 0.35 1.42 1.02 2.924 1.67 1.8504 0.67 2.44 1.26 0.04 1.2598 2.68 0.87 0.35 0.33 3.37 5.72
3.030 0.6691 2.864 1.8499 1.2593
77.000 17.000 4.3 7.8 9.0 36.0 26.0 74.26 42.5 47.000 17 62 32.0 1.0 32.000 68.0 22.0 9.0 8.5 85.5 2.6
76.950 16.996 72.74 46.987 31.987
20 BSPB20Q32 3.031 0.7874 0.17 0.31 0.35 1.42 1.02 2.924 1.67 1.8504 0.67 2.44 1.26 0.04 1.2598 2.68 0.87 0.35 0.33 3.37 5.5
3.030 0.7872 2.864 1.8499 1.2593
77.000 20.000 4.3 7.8 9.0 36.0 26.0 74.26 42.5 47.000 17 62 32.0 1.0 32.000 68.0 22.0 9.0 8.5 85.5 2.5
76.950 19.996 72.74 46.987 31.987
25 BSPB25Q42 3.228 0.9842 0.17 0.39 0.43 1.97 1.57 3.160 2.34 2.4606 0.79 3.35 1.65 0.04 1.6535 2.83 0.98 0.39 0.39 4.53 10.12
3.226 0.9841 3.100 2.4601 1.6530
82.000 25.000 4.3 9.8 11.0 50.0 40.0 80.26 59.5 62.500 20 85 42.0 1.0 42.000 72.0 25.0 10.0 10.0 115.0 4.6
81.950 24.995 78.74 62.487 41.987
30 BSPB30Q42 3.228 1.1811 0.17 0.39 0.43 1.97 1.57 3.160 2.34 2.4606 0.79 3.35 1.65 0.04 1.6535 2.83 0.98 0.39 0.39 4.53 9.9
3.226 1.1809 3.100 2.4601 1.6530
82.000 30.000 4.3 9.8 11.0 50.0 40.0 80.26 59.5 62.500 20 85 42.0 1.0 42.000 72.0 25.0 10.0 10.0 115.0 4.5
81.950 29.996 78.74 62.487 41.987
35 BSPB35Q50 3.228 1.378 0.17 0.51 0.51 2.36 1.81 3.160 2.62 2.6772 0.81 3.74 1.97 0.04 1.9685 2.83 0.98 0.39 0.39 4.96 13.64
3.226 1.3778 3.100 2.6767 1.9680
82.000 35.000 4.3 13.0 13.0 60.0 46.0 80.26 66.5 68.000 20.5 95 50.0 1.0 50.000 72.0 25.0 10.0 10.0 126.0 6.2
81.950 34.995 78.74 67.987 49.987
40 BSPB40Q50 3.228 1.5748 0.17 0.51 0.51 2.36 1.81 3.160 2.62 2.6772 0.81 3.74 1.97 0.04 1.9685 2.83 0.98 0.39 0.39 4.96 13.2
3.226 1.5746 3.100 2.6767 1.9680
82.000 40.000 4.3 13.0 13.0 60.0 46.0 80.26 66.5 68.000 20.5 95 50.0 1.0 50.000 72.0 25.0 10.0 10.0 126.0 6
81.950 39.995 78.74 67.987 49.987
40 BSPB40Q65 4.173 1.5748 0.21 0.46 0.71 2.99 2.6 4.105 3.54 3.7402 1.18 5.12 2.56 0.04 2.5590 3.66 1.26 0.51 0.59 6.89 34.54
4.171 1.5746 4.045 3.7396 2.5585
106.000 40.000 5.3 11.8 18.0 76.0 66.0 104.26 90.0 95.000 30.0 130.0 65.0 1.0 65.000 93.0 32.0 13.0 15.0 175.0 15.7
105.950 39.995 102.74 94.987 65.987
45 BSPB45Q65 4.173 1.7716 0.21 0.46 0.71 2.99 2.6 4.105 3.54 3.7402 1.18 5.12 2.56 0.04 2.5590 3.66 1.26 0.51 0.59 6.89 33.88
4.171 1.7714 4.045 3.7396 2.5585
106.000 45.000 5.3 11.8 18.0 76.0 66.0 104.26 90.0 95.000 30.0 130.0 65.0 1.0 65.000 93.0 32.0 13.0 15.0 175.0 15.4
105.950 44.995 102.74 94.987 65.987
50 BSPB50Q65 4.173 1.9685 0.21 0.46 0.71 2.99 2.6 4.105 3.54 3.7402 1.18 5.12 2.56 0.04 2.5590 3.66 1.26 0.51 0.59 6.89 33.22
4.171 1.9683 4.045 3.7396 2.5585
106.000 50.000 5.3 11.8 18.0 76.0 66.0 104.26 90.0 95.000 30.0 130.0 65.0 1.0 65.000 93.0 32.0 13.0 15.0 175.0 15.1
105.950 49.995 102.74 94.987 65.987
100
1
FAFNIR MM-EX AND MM-XWO BEARINGS FOR REPLACEMENT ON EX-CELL-O SPINDLES
KEYWAY KEYWAY
DB DT DB DT
DF DF
101
MM-EX
Replacement Bearings
For Ex-Cell-O Spindles
102
MM-XWO
Replacement Bearings
For Ex-Cell-O Spindles
MM20 XWOCRDU E9103A XLO 20-107 0 0.37500/.37485 1.1250/1.1248 0.6875/.6675 40000 65000 80000
MM30XWOCRDU E9103C XLO 30-57 10 0.62500/.62485 1.5000/1.4998 1.000/.980 27000 30000 35000
MM30XWOCRDU E9103A XLO 30-107 0 0.62500/.62485 1.5000/1.4998 1.000/.980 35000 40000 60000
MM55XWOCRDU E9103E
MM55XWOCRDU E9103C
XLO 55-27
XLO 55-57
50
20
0.81250/.81235
0.81250/.81235
2.0000/1.9998
2.0000/1.9998
1.000/.980
1.000/.980
5000
20000
8000
22000
12000
24000 1
MM55XWOCRDU E9103A XLO 55-107 0 0.81250/.81235 2.0000/1.9998 1.000/.980 24000 27000 45000
MM57XWOCRDU E9103F XLO 57-17 100 1.06250/1.06235 2.2500/2.2498 1.000/.980 2000 4000 6000
MM57XWOCRDU E9103C XLO 57-57 20 1.06250/1.06235 2.2500/2.2498 1.000/.980 18000 20000 22000
MM57XWOCRDU E9103A XLO 57-107 0 1.06250/1.06235 2.2500/2.2498 1.000/.980 22000 25000 35000
MM67XWOCRDU E9103F XLO 67-17 90 1.2500/1.2498 2.4375/2.4373 1.250/1.230 3600 4500 6000
MM67XWOCRDU E9103C XLO 67-57 20 1.2500/1.2498 2.4375/2.4373 1.250/1.230 12500 15000 20000
MM67XWOCRDU E9103A XLO 67-107 0 1.2500/1.2498 2.4375/2.4373 1.250/1.230 16000 20000 30000
MM90XWOCRDU E9103F XLO 90-17 250 1.6250/1.6248 3.4375/3.4372 1.625/1.605 1000 2000 4000
MM90XWOCRDU E9103D XLO 90-47 175 1.6250/1.6248 3.4375/3.4372 1.625/1.605 3000 5000 8000
MM90XWOCRDU E9103C XLO 90-57 100 1.6250/1.6248 3.4375/3.4372 1.625/1.605 5000 7000 11000
MM90XWOCRDU E9103A XLO 90-77 20 1.6250/1.6248 3.4375/3.4372 1.625/1.605 10000 14000 20000
MM115XWOCRDU E9103E XLO 115-27 300 2.2500/2.2498 4.7500/4.7496 2.250/2.230 1000 2000 3000
MM115XWOCRDU E9103C XLO 115-47 150 2.2500/2.2498 4.7500/4.7496 2.250/2.230 3000 4500 7000
MM115XWOCRDU E9103A XLO 115-77 30 2.2500/2.2498 4.7500/4.7496 2.250/2.230 6000 8000 15000
MM135XWOCRDU E9103C XLO 135-67 50 1.2500/1.2498 2.6875/2.6873 1.250/1.230 6000 7000 12000
MM135XWOCRDU E9103A XLO 135-107 0 1.2500/1.2498 2.6875/2.6873 1.250/1.230 15000 19000 28000
MM155XWOCRDU E9103D XLO 155-37 300 2.7500/2.7498 4.7500/4.7496 2.250/2.230 1000 2000 3000
MM155XWOCRDU E9103B XLO 155-67 150 2.7500/2.7498 4.7500/4.7496 2.250/2.230 4000 5000 6500
MM155XWOCRDU E9103A XLO 155-87 50 2.7500/2.7498 4.7500/4.7496 2.250/2.230 6000 7000 10000
MM165XWOCRDU E9103E XLO 165-27 800 3.50000/3.49975 6.3125/6.3121 3.000/2.980 500 1000 2000
MM165XWOCRDU E9103C XLO 165-57 250 3.50000/3.49975 6.3125/6.3121 3.000/2.980 2000 3000 5000
MM165XWOCRDU E9103A XLO 165-87 50 3.50000/3.49975 6.3125/6.3121 3.000/2.980 5000 6500 9000
103
104
105
G1 103 K RRB
Numbers: Additional Features
Last three numbers indicate bore size — L one Mechani-seal
first in inches, last two in sixteenths LL two Mechani-seals
015 15⁄16" PP two seals
103 1-3⁄16" R one land riding rubber seal
203 2-3⁄16" RR two land riding rubber seals
25 25mm (metric) B spherical outside diameter
40 40mm (metric) S external self-aligning
PP2, 3, 4, etc., — Tri-Ply seals (if preceded by K)
TDC thin dense chrome plate
F food grade grease
172
Page Page
WIDE INNER RING BEARINGS SPECIAL SERIES
1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174-175 KL, KLB, KLL, KLLB Standard Series,
Collar Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176 Non-Relubricatable Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185
G-KLL, G-KLLB Standard Series Relubricatable Types . . . . 186
INDUSTRIAL SERIES KLLG Series, Wireloc Non-Relubricatable Types . . . . . . . . . 187
KR, KRB, KRR, KRRB, Non-Relubricatable Types . . . . . . . . . 177 GN-KLLB Heavy Series, Relubricatable Types . . . . . . . . . . . . 188
G-KRR, G-KRRB, Relubricatable Types . . . . . . . . . . . . . . . . . 178
GN-KRRB Heavy Series, Relubricatable Types . . . . . . . . . . . 179 INDUSTRIAL SERIES
Tri-Ply Seal Series, Non-Relubricatable and
STANDARD SERIES Relubricatable Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189
RA-RR, RA-RRB Series Non-Relubricatable Types . . . . . . . . 180 GC-KRRB Series, Concentric Collar, Relubricatable Types . 190
GRA-RR, GRA-RRB Series, Relubricatable Types . . . . . . . . . 181 GY-KRRB Setscrew Series Extra-Wide Inner,
YA-RR, YA-RRB Series, Non-Relubricatable Types . . . . . . . . 182 Relubricatable Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191
GYA-RR, GYA-RRB Series, Relubricatable Types . . . . . . . . . 183 GYM-KRRB Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
RAL-NPPB Series, Non-Relubricatable Types . . . . . . . . . . . . 184 ER Series, Relubricatable Types . . . . . . . . . . . . . . . . . . . . . . . 193
SM Series, A and B Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194
SMN Heavy Series, A and B Types . . . . . . . . . . . . . . . . . . . . . . 195
SM-S Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
SMN-S Heavy Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
173
INTRODUCTION type is used for mounting in straight-bored housings. The spherical O.D.
type must be mounted in a corresponding spherical seat and is used to
The Fafnir line of Timken, originated the wide inner ring bearing design for compensate for shaft or housing misalignments.
ball bearings which could be easily mounted on straight shafts and
positioned without shoulders, locknuts or adapters. Environment
The internal bearing construction is basically the same as the deep race, Surrounding conditions such as humidity, corrosive fumes, thermal (either
single row radial type with ability to carry radial, thrust and combined loads, high or low temperature), vibration, radiation, electrical discharge and many
while providing low friction qualities which are characteristic of high-grade others can detract from optimum performance. The use of improved seals,
bearings. The inner ring is generally extended on both sides of the race to choice of lubricant most resistant to the exact environment, etc. may permit
provide additional shaft support, and is locked to the shaft by specially adequate bearing life to be achieved under these less ideal conditions.
designed set screws or by the Fafnir-originated, eccentric self-locking collar Contact Timken Engineering to discuss highly corrosive applica-
or concentric collar. The wide inner ring bearings are also available with tions (i.e.. food processing, chemical exposure) where Fafnir TDC®
cylindrical or spherical outside diameters. The cylindrical or straight O.D. (RR and GY-KRRB Series) bearings can be utilized.
RR Series
These bearings feature the flareout, contact type R-seal which encloses a synthetic rubber
impregnated washer between two metal caps. Most sizes incorporate Fafnir’s Shroud-Seal
design. R-seal wide inner ring bearings are available in the following non-relubricatable
variations: KR (one seal, cylindrical O.D.), KRR and KRRB (two seals). Relubricatable
versions are: G-KRR, G-KRRB and GN-KRRB (heavy-duty).
RR Series
LL Series
These bearings are dimensionally interchangeable with the RR series, but have non-contact
labyrinth seals and steel cages for low torque, high speed and higher temperature service.
(Up to 350°F.)
RA-RR Series
The RA-RR series features an extended inner ring and self-locking collar for simple effective
shaft retention in a standard series bearing. The newly developed, positive contact, land-riding
R-seal provides improved protection against the heavy contamination encountered in many
applications. All sizes have a heat stabilized, moisture conditioned 6/6 nylon retainer which
has proven extremely effective under conditions of misalignment.
RA-RR extended inner ring bearings are available as RA-RR (two-seals, straight O.D.) and
RA-RRB (two seals, spherical O.D.). Relubricatable versions are GRA-RR and GRA-RRB.
RA-RR Series
Tri-Ply-Seal Series
Tri-Ply Seal bearings are designed for environments where severe conditions and moisture
are present. The new one piece Tri-Ply seals incorporate a highly effective seal design
molded to an exterior shroud cap. The shroud cap protects the seal lips from fiber wrap and
abrasion while enhancing the overall sealing effectiveness of the unit. All units incorporate
the self-locking collar and have a nylon retainer.
Tri-ply Seal bearings are available in both a non-relubricatable (KPPB) and relubricatable
version (G-KPPB). Tri-Ply-Seal Series
174
GY-KRRB Series
Full width inner ring GY-KRRB bearings increase shaft support in HVAC, conveyors and other
industrial applications. They feature superfinished raceways, grade 10 balls and anti-backout
nylon patch setscrews. Flexible 6/6 nylon retainers and land riding shroud seals also ensure
excellent performance. They are factory prelubricated and relubricable setscrew mounting
feature is ideal for reversing applications. GY-KRRB Series
YA-RR series
The (G)YA-RR (B) series relubricatable and non-relubricatable bearings are an extended inner
ring type with specially designed setscrews. Positive contact land riding R-Seals provide
protection against harmful contaminants and retain lubricant.
Setscrew series bearings are available in both non-relubricatable version YA-RRB and
relubricatable version GYA-RRB. Both types have nylon retainers.
1
YA-RR Series
ER Series
This series offers industry standard mounting dimensions and standard nomenclature for a
large variety of sizes of relubricatable, extended inner ring bearings for through-bored
housings. All bearings in this series have nylon retainers and are equipped with snap rings
which eliminate the need for machining housing shoulders. ER bearings are designed with a
unique setscrew locking device, that locks bearing to shaft and is resistant to loosening during
operation. Positive contact land riding R Seals provide protection against harmful contami-
nants and retain lubricant. ER bearings are all black oxide coated for corrosion resistance. ER Series
Ideal for low starting and running torque applications.
175
1. Observe cam design of the wide inner ring and self locking collar.
2. Mate the cam of the collar with the cam of the wide inner ring.
3. Press the locking collar against the wide inner ring and turn in the
direction of shaft rotation until tightly engaged.
4. With drift pin in collar hole, strike in direction of shaft rotation to lock.
For Stationary shafts and outer ring rotation, turn collar in opposite direction of rotation.
176
The RR Series wide inner ring ball bearings are designed especially
for extremely dirty or wet conditions. These bearings feature R-Seals
with flared lips which firmly contact the ground O.D. of the inner ring to S S S
d1 d1 d1
provide a positive seal against dust, dirt and other contaminants while d
L
F1
D
d
L
F1
D
d
L
F1
D
effectively retaining the lubricant. RR Series bearings are equipped B B B
1 15
KR One Seal KRR Two Seals KRRB Two Seals
Recommended shaft tolerances: ⁄ 2"-1 ⁄16", nominal to -.0005", -.013mm;
2"-2 15⁄16", nominal to -.0010", -.025mm. Cylindrical O.D. Cylindical O.D. Spherical O.D.
TO ORDER, SPECIFY BEARING NUMBER FOLLOWED BY “AND COLLAR”. EXAMPLE: 1103KRRB AND COLLAR.
Bearing Collar Basic Bore (1) O.D. Ring S L d1 B2 B1 F1 O P Brg. & Static Extended
1
Number Number Outer d D Widths Collar Wt. Load Dynamic
Ring Rating Load
Cylindrical Cylindrical Size B C CO Rating
O.D. O.D. Inner Outer CE
(Spherical
O.D.
) in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
lbs
kg
lbs
N
lbs
N
1
– 1008KRR (KRRB) S1008K ⁄2 0.34 0.154
5 3 35
1010KR 1010KRR (KRRB) S1010K 203 ⁄8 1.5748 1 ⁄32 0.472 ⁄64 5⁄32 1 ⁄8
1 17
⁄32 1
15
⁄32 1.339 0.652 0.562 0.32 0.145 1060 2400
11
– 1011KRR (KRRB) S1011K ⁄16 40 27.78 12 13.9 4.0 28.6 13.5 37.3 34.01 16.56 14.27 0.27 0.122 4700 10700
– E17KRR (KRRB) SE17K 17 0.27 0.122
3 11 43
1012KR 1012KRR (KRRB) S1012K 204 ⁄4 1.8504 1 ⁄32 0.551 ⁄64 5⁄32 5
1 ⁄16
17
⁄32 1
23
⁄32 1.532 0.652 0.602 0.45 0.204 1400 3200
– E20KRR (KRRB) SE20K 20 47 34.13 14 17.1 4.0 33.3 13.5 43.7 38.91 16.56 15.29 0.45 0.204 6200 14300
13
– 1013KRR — S1013K ⁄16 0.63 0.286
7
– 1014KRR (KRRB) S1014K 205 ⁄8 0.6 0.272
15 3 11
1015KR 1015KRR (KRRB) S1015K ⁄16 2.0472 1 ⁄8 0.591 ⁄16 5⁄32 1 ⁄2
1 17
⁄32 1
47
⁄64 1.779 0.656 0.623 0.56 0.254 1730 3550
1100KR 1100KRR (KRRB) S1100K 1 52 34.92 15 17.5 4.0 38.1 13.5 44.1 45.19 16.66 15.82 0.51 0.231 7700 15800
– E25KRR (KRRB) SE25K 25 0.51 0.231
1
– 1101 (KRRB) S1101K 1 ⁄16 0.91 0.413
1 7 (2) 23
1102KR 1102KRR (KRRB) S1102K 1 ⁄8 2.4409 1 ⁄16 0.630 ⁄32 5⁄32 1 ⁄4
3 5
⁄8 1
29
⁄32 2.068 0.770 0.700 0.89 0.404 2500 4900
3
1103KR 1103KRR (KRRB) S1103K 206 1 ⁄16 62 36.51 16 18.3 4.0 44.4 15.9 48.4 52.53 19.56 17.78 0.83 0.376 11100 21200
1
– 1103KRR3 (KRRB3) S1103K3 1 ⁄4 0.77 0.349
– E30KRR (KRRB) SE30K 30 0.83 0.376
1
1104KR 1104KRR (KRRB) S1104K 1 ⁄4 1.44 0.653
5 31 (3) 5 1 43 1
– 1105KRR (KRRB) S1105K 207 1 ⁄16 2.8346 1 ⁄64 0.669 0.742 ⁄32 2 ⁄8 ⁄64 2 ⁄64 2.384 0.775 0.722 1.33 0.603 3400 6400
3
– 1106KRR (KRRB) S1106K 1 ⁄8 72 37.70 17 18.85 4.0 54.0 17.1 51.2 60.55 19.69 18.34 1.26 0.572 15100 28500
7
1107KR 1107KRR (KRRB) S1107 1 ⁄16 1.2 0.544
– E35KRR (KRRB) SE35K 35 1.26 0.572
1 11 (4) 27
1108KR 1108KRR (KRRB) S1108KT 1 ⁄2 3.1496 1 ⁄16 0.709 ⁄32 3⁄16 2 ⁄8
3 23
⁄32 2 ⁄32
7
2.669 0.805 0.757 1.74 0.789 4400 8150
9
– 1109KRR (KRRB) S1109KT 208 1 ⁄16 80 42.86 18 21.4 4.8 60.3 18.3 56.4 67.79 20.45 19.28 1.63 0.739 19600 36000
– E40KRR (KRRB) SE40K 40 1.63 0.739
5
– 1110KRR (KRRB) S1110K 1 ⁄8 1.98 0.898
11 11 27
1111KR 1111KRR (KRRB) S1111K 209 1 ⁄16 3.3465 1 ⁄16 0.748 ⁄32 3⁄16 2 ⁄2
1 23
⁄32 2 ⁄32
7
2.908 0.952 0.850 1.87 0.848 4500 8150
3
1112KR 1112KRR (KRRB) S1112K 1 ⁄4 85 42.86 19 21.4 4.8 63.5 18.3 56.4 73.86 24.18 21.59 1.82 0.825 20000 36000
– E45KRR (KRRB) SE45K 45 1.82 0.825
7 15 (5) 31
– 1114KRR (KRRB) S1114K 1 ⁄8 3.5433 1 ⁄16 0.787 ⁄32 3 ⁄16 2 ⁄4
3 23
⁄32 2
15
⁄32 3.059 0.965 0.876 2.33 1.057 5100 8800
15 (5)
1 ⁄16
(6) (6)
1115KR 1115KRR (KRRB) S1115K 210 90 49.21 20 24.6 4.8 69.9 18.3 62.7 77.7 24.51 22.25 2.18 1.000 22709 3900
– E50KRR (KRRB) SE50K 50 2.18 1.000
177
in. in. in. in. in. in. in. in. in. in. in. in. lbs lbs lbs
mm mm mm mm mm mm mm mm mm mm mm mm kg N N
1
— G1008KRRB S1008K ⁄2 0.34 0.154
9
— G1009KRRB S1009K ⁄16 0.31 0.141
5 3 35 5 1 17 15
G1010KRR G1010KRRB S1010K 203 ⁄8 1.5748 1 ⁄32 0.472 ⁄64 ⁄32 1 ⁄8 ⁄32 0.107 1 ⁄32 1.339 0.652 0.31 0.141 1060 2400
11
G1011KRR G1011KRRB S1011K ⁄16 40 27.78 12 13.9 4.0 28.6 13.5 2.72 37.3 34.01 16.56 0.26 0.118 4700 10700
GE17KRR GE17KRRB SE17K 17 0.26 0.118
3 11 43 5 5 17 23
G1012KRR G1012KRRB S1012K 204 ⁄4 1.8504 1 ⁄32 0.551 ⁄64 ⁄32 1 ⁄16 ⁄32 0.135 1 ⁄32 1.532 0.681 0.45 0.204 1400 3200
GE20KRR GE20KRRB SE20K 20 47 34.13 14 17.1 4.0 33.3 13.5 3.43 43.7 38.91 17.3 0.45 0.204 6200 14300
13
— G1013KRRB S1013K ⁄16 0.63 0.286
7 3 11 5 1 17 3
G1014KRR G1014KRRB S1014K 205 ⁄8 2.0472 1 ⁄8 0.591 ⁄16 ⁄32 1 ⁄2 ⁄32 0.152 1 ⁄4 1.779 0.656 0.58 0.263 1730 3550
15
G1015KRR G1015KRRB S1015K ⁄16 52 34.92 15 17.5 4.0 38.1 13.5 3.86 44.4 45.19 16.66 0.53 0.240 7700 15800
G1100KRR G1100KRRB S1100K 1 0.50 0.227
GE25KRR GE25KRRB SE25K 25 0.50 0.227
1
G1101KRR G1101KRRB S1101K 1 ⁄16 0.92 0.417
1 7 23 5 47 5 29
G1102KRR G1102KRRB S1102K 1 ⁄8 2.4409 1 ⁄16 0.709 ⁄32 ⁄32 1 ⁄64 ⁄8 0.156 1 ⁄32 2.068 0.849 0.89 0.404 2500 4900
3
G1103KRR G1103KRRB S1103K 206 1 ⁄16 62 36.51 18 18.3 4.0 44.1 15.9 3.96 48.4 52.53 21.56 0.83 0.376 11100 21800
1
— G1103KRRB3 S1103K3 1 ⁄4 0.77 0.349
GE30KRR GE30KRRB SE30K 30 0.83 0.376
1
G1104KRR G1104KRRB S1104K 1 ⁄4 1.44 0.653
5 31 5 1 43 1
— G1105KRRB S1105K 207 1 ⁄16 2.8346 1 ⁄64 0.748 0.742 ⁄32 2 ⁄8 ⁄64 0.145 2 ⁄64 2.384 0.856 1.36 0.617 3400 6400
3
G1106KRR G1106KRRB S1106K 1 ⁄8 72 37.70 19 18.85 4.0 54.0 17.1 3.68 51.2 60.55 21.74 1.29 0.585 15100 28500
7
G1107KRR G1107KRRB S1107 1 ⁄16 1.24 0.562
GE35KRR GE35KRRB SE35K 35 1.29 0.585
1 11 27 3 3 23 7
G1108KRR G1108KRRB S1108KT 1 ⁄2 3.1496 1 ⁄16 0.827 ⁄32 ⁄16 2 ⁄8 ⁄32 0.16 2 ⁄32 2.669 0.923 1.79 0.812 4400 8150
9
— G1109KRRB S1109KT 208 1 ⁄16 80 42.86 21 21.4 4.8 60.3 18.3 4.06 56.4 67.79 23.44 1.70 0.771 19600 36000
GE40KRR GE40KRRB SE40K 40 1.70 0.771
5
G1110KRR G1110KRRB S1110K 1 ⁄8 2.04 0.925
11 11 27 3 1 23 7
G1111KRR G1111KRRB S1111K 209 1 ⁄16 3.3465 1 ⁄16 0.866 ⁄32 ⁄16 2 ⁄2 ⁄32 0.179 2 ⁄32 2.908 1.07 1.94 0.880 4500 8150
3
G1112KRR G1112KRRB S1112K 1 ⁄4 85 42.86 22 21.4 4.8 63.5 18.3 4.55 56.4 73.86 27.18 1.84 0.835 20000 36000
GE45KRR GE45KRRB SE45K 45 1.84 0.835
13
— G1113KRR S1113K 1 ⁄16 2.46 1.116
7 15 (2) 31 3 3 23 15
— G1114KRRB S1114K 1 ⁄8 3.5433 1 ⁄16 0.903 ⁄32 ⁄16 2 ⁄4 ⁄32 0.185 2 ⁄32 3.059 1.083 2.28 1.034 5100 8800
15
G1115KRR G1115KRRB S1115K 210 1 ⁄16 90 49.21 23 24.6 4.8 69.9 18.3 4.7 62.7 77.7 27.51 2.24 1.016 22700 39200
GE50KRR GE50KRRB SE50K 50 2.24 1.016
The heavy series R-Seal wide inner ring bearings are similar to the
standard series described on page 151 but are capable of withstanding
continuous, heavy or shock loads. The GN-KRRB series has heavier S G
section 300 series bearings, as well as a considerably thicker sealing F1
member in the contact-type diaphram seal. This design assures d d1
L D
complete retention of the lubricant and positive exclusion of all
B
contaminents. These bearings are especially effective at slow-to-
moderate speeds under the severest of conditions of dirt and corrosion.
B1
1
TO ORDER, SPECIFY BEARING NUMBER FOLLOWED BY “AND COLLAR”. Example: GN303KRRB and Collar.
(1)
Bearing Collar Basic Bore O.D. Ring S G L d1 B2 M B1 F1 O Brg. & Static Extended
Number Number Outer d D Widths Collar Wt. Load Dynamic
Ring Rating Load
Size B C CO Rating
Inner Outer CE
in. in. in. in. in. in. in. in. in. in. in. in. in. lbs lbs lbs
mm mm mm mm mm mm mm mm mm mm mm mm kg N N
3 7 11 3 5 15 11 31
GN103KRRB SN103K 306 1 ⁄16 2.8346 1 ⁄16 0.787 ⁄16 ⁄4 ⁄32 1 ⁄16 ⁄16 0.142 1 ⁄32 2.369 0.925 1.22 0.553 3550 7500
72 36.51 20 17.5 19.1 4 49.2 17.5 3.61 50 60.17 23.5 15600 33500
1
GN104KRRB SN104K 1 ⁄4 1.68 0.762
5 1 23 25 5 3 11 1
GN105KRRB SN105K 307 1 ⁄16 3.1496 1 ⁄2 0.866 ⁄32 ⁄32 ⁄32 2 ⁄16 ⁄16 0.156 2 ⁄32 2.638 1.063 1.64 0.744 4500 9150
3
GN106KRRB SN106K 1 ⁄8 80 38.10 22 18.3 19.8 4 55.6 17.5 3.96 51.6 67.01 27 1.6 0.726 20000 40500
7
GN107KRRB SN107K 1 ⁄16 1.56 0.708
(2) 1 5 25 27 3 1 13 1
GN108KRRB SN108K 308 1 ⁄2 3.5433 1 ⁄8 0.984 ⁄32 ⁄32 ⁄16 2 ⁄2 ⁄16 0.182 2 ⁄4 2.955 1.05 2.54 1.152 5500 11000
90 41.28 25 19.8 21.4 4.8 63.5 20.6 4.62 57.2 75.06 26.67 24500 49000
5 11 25 29 3 3 13 5
GN110KRRB SN110K 309 1 ⁄8 3.9370 1 ⁄16 1.063 ⁄32 ⁄32 ⁄16 2 ⁄4 ⁄16 0.197 2 ⁄16 3.251 1.123 3.65 1.656 6700 13200
11
GN111KRRB SN111K 1 ⁄16 100 42.86 27 19.8 23 4.8 69.9 20.6 5 58.7 82.58 28.52 3.21 1.456 30000 58500
3
GN112KRRB SN112K 1 ⁄4 2.95 1.388
7 15 31 31 3 63 7 5
GN114KRRB SN114K 310 1 ⁄8 4.3307 1 ⁄16 1.142 ⁄32 ⁄32 ⁄16 2 ⁄64 ⁄8 0.211 2 ⁄8 3.654 1.215 4.35 1.973 8000 15300
15
GN115KRRB SN115K 1 ⁄16 110 49.21 29 24.6 24.6 4.8 75.8 22.2 5.36 66.7 82.87 30.86 4.2 1.905 35500 68000
3 3 3 3 1 7 7
GN200KRRB SN200K 311 2 4.7244 2 ⁄16 1.22 1 ⁄32 1 ⁄32 ⁄16 3 ⁄4 ⁄8 0.216 2 ⁄8 4.007 1.475 4.7 2.132 9300 18000
3
GN203KRRB SN203K 2 ⁄16 120 55.56 31 27.8 27.8 4.8 82.6 22.2 5.49 73 101.78 37.47 5.22 2.368 41500 80000
7 7 7 7 1 1 15 1
GN207KRRB SN207K 312 2 ⁄16 5.1181 2 ⁄16 1.299 1 ⁄32 1 ⁄32 ⁄4 3 ⁄2 ⁄16 0.23 3 ⁄8 4.312 1.535 6.26 2.839 10800 20400
130 61.91 33 31 31 6.4 88.9 23.8 5.84 79.4 108.52 38.99 48000 90000
11 11 11 11 1 1 1
GN211KRRB SO211K 314 2 ⁄16 5.9055 2 ⁄16 1.457 1 ⁄32 1 ⁄32 ⁄4 4 1 ⁄16 0.265 3 ⁄2 4.973 1.77 9.94 4.509 14300 26000
150 68.26 37 34.1 34.1 6.4 101.6 27 6.73 88.9 126.31 44.96 63000 116000
15 15 15 15 1 7 1 15
GN215KRRB SN215K 315 2 ⁄16 6.2992 2 ⁄16 1.535 1 ⁄32 1 ⁄32 ⁄4 4 ⁄16 1 ⁄4 0.255 3 ⁄16 5.273 2.013 12.42 5.634 16000 28500
160 74.61 39 37.3 37.3 6.4 112.7 31.8 6.48 100 133.02 51.13 71000 125000
3 3 19 19 1 11 1 3
GN303KRRB SN303K 316 3 ⁄16 6.6929 3 ⁄16 1.614 1 ⁄32 1 ⁄32 ⁄4 4 ⁄16 1 ⁄4 0.286 4 ⁄16 5.623 2.010 15.71 7.126 18000 30500
170 80.96 41 40.5 40.5 6.4 119.1 31.8 7.26 106.4 142.82 51.05 80000 137000
7 7 21 21 5 1 7 9
GN307KRRB SN307K 318 3 ⁄16 7.4803 3 ⁄16 1.772 1 ⁄32 1 ⁄32 ⁄16 5 ⁄4 1 ⁄16 0.322 4 ⁄16 6.353 2.072 20.26 9.19 22400 33500
190 87.31 45 42.1 42.1 7.9 133.4 36.5 8.18 115.9 161.37 52.63 98000 156000
15 15 31 31 5 3 7 1
GN315KRRB SN315K 320 3 ⁄16 8.4646 3 ⁄16 1.929 1 ⁄32 1 ⁄32 ⁄16 5 ⁄4 1 ⁄16 0.308 5 ⁄16 7.199 2.337 26.97 12.233 22900 43000
215 100.01 49 50 50 7.9 146.1 36.5 7.82 129.6 182.85 59.36 132000 193000
(1) 3 3 1
Bore tolerances: 1 ⁄16"-2 ⁄16" nominal to +.0005", .013mm; 2 ⁄4"-3 3⁄16" nominal to +.0006", .015mm.
(2)
Also available with cylindrical O.D. Delete suffix “B’ Example: GN108KRR.
179
Non-Relubricatable Types B2
1
Recommended shaft tolerances: ⁄2"-115⁄16", nominal to -.0005", -.013mm;
2"-2 3/16", nominal to -.0010", -.025mm.
B1
TO ORDER, SPECIFY BEARING NUMBER FOLLOWED BY “AND COLLAR”. EXAMPLE: RA100RRB AND COLLAR.
(1)
Bearing Collar Basic Bore O.D. Ring S G L d1 B2 B1 Brg. & Static Extended
Number Number Outer d D Widths Collar Wt. Load Dynamic
Cylindrical Spherical Size B C CO Rating
O.D. O.D. Inner Outer CE
in. in. in. in. in. in. in. in. in. in. lbs lbs lbs
mm mm mm mm mm mm mm mm mm mm kg N N
1
RA008RR RA008RRB S1008K ⁄2 0.34 0.154
9 (2) 5 1 17 1
RA009RR RA009RRB S1009K ⁄16 1.5748 0.750 0.512 0.256 0.494 ⁄32 1 ⁄8 ⁄32 1 ⁄8 0.32 0.145 1060 2360
5
RA010RR RA010RRB S1010K 203 ⁄8 40 19.05 13 6.5 12.55 4.0 28.6 13.5 28.6 0.28 0.127 4700 10600
RAE17RR RAE17RRB SE17K 17 0.28 0.127
3 (3) 5 5 17 7
RA012RR RA012RRB S1012K 204 ⁄4 1.8504 0.844 0.591 0.295 0.548 ⁄32 1 ⁄16 ⁄32 1 ⁄32 0.29 0.132 1400 3200
RAE20RR RAE20RRB SE20K 20 47 21.44 15 7.49 13.92 4.0 33.3 13.5 31 0.29 0.132 6200 14300
13
RA013RR RA013RRB S1013K ⁄16 0.51 0.231
7 5 1 17 7
RA014RR RA014RRB S1014K 205 ⁄8 2.0472 0.844 0.591 0.295 0.548 ⁄32 1 ⁄2 ⁄32 1 ⁄32 0.47 0.213 1730 3550
15
RA015RR RA015RRB S1015K 16⁄ 52 21.44 15 7.49 13.92 4.0 38.1 13.5 31 0.44 0.2 7700 15800
RA100RR RA100RRB S1100K 1 0.41 0.186
RAE25RR RAE25RRB SE25K 25 0.41 0.186
1
RA101RR RA101RRB S1101K 1 ⁄16 0.77 0.349
1 5 47 5 13
RA102RR RA102RRB S1102K 1 ⁄8 2.4409 0.938 0.709 0.354 0.583 ⁄32 1 ⁄64 ⁄8 1 ⁄32 0.72 0.327 2500 4900
3
RA103RR RA103RRB S1103K 206 1 ⁄16 62 23.82 18 8.99 14.81 4.0 44.1 15.9 35.7 0.7 0.318 11100 21800
1
RA103RR2 RA103RRB2 S1103K3 1 ⁄4 0.65 0.295
RAE30RR RAE30RRB SE30K 30 0.7 0.318
1
RA104RR RA104RRB S1104K 1 ⁄4 1.24 0.562
5 5 1 43 17
RA105RR RA105RRB S1105K 207 1 ⁄16 2.8346 1.000 0.748 0.374 0.626 ⁄32 2 ⁄8 ⁄64 1 ⁄32 1.19 0.54 3400 6400
3
RA106RR RA106RRB S1106K 1 ⁄8 72 25.4 19 9.5 15.9 4.0 54.40 17.1 38.9 1.13 0.513 15100 28500
7
RA107RR RA107RRB S1107K 1 ⁄16 1.05 0.476
RAE35RR RAE35RRB SE35K 35 1.13 0.513
1 (4) 3 3 23 23
RA108RR RA108RRB S1108K 1 ⁄2 3.1496 1.188 0.866 0.433 0.755 ⁄16 2 ⁄8 ⁄32 1 ⁄32 1.53 0.694 4400 8150
9
RA109RR RA109RRB S1109K 208 1 ⁄16 80 30.18 22 11 19.18 4.8 60.3 18.3 43.7 1.43 0.649 19600 36000
RAE40RR RAE40RRB SE40K 40 1.43 0.649
5
RA110RR RA110RRB S1110K 1 ⁄8 1.72 0.78
11 3 1 23 23
RA111RR RA111RRB S1111K 209 1 ⁄16 3.3465 1.188 0.866 0.433 0.755 ⁄16 2 ⁄2 ⁄32 1 ⁄32 1.62 0.735 4500 8150
3
RA112RR RA112RRB S1112K 1 ⁄4 85 30.18 22 11 19.18 4.8 63.5 18.3 43.7 1.5 0.68 20000 36000
RAE45RR RAE45RRB SE45K 45 1.5 0.68
13
RA113RR RA113RRB S1113K 1 ⁄16 1.94 0.88
7 3 3 23 23
RA114RR RA114RRB S1114K 1 ⁄8 3.5433 1.188 0.866 0.433 0.755 ⁄16 2 ⁄4 ⁄32 1 ⁄32 1.83 0.83 5100 8800
15
RA115RR RA115RRB S1115K 210 1 ⁄16 90 30.18 22 11 19.18 4.8 69.9 18.3 43.7 1.70 0.771 22700 39200
RA115RR2 RA115RRB2 S1115K2 2 1.58 0.717
RAE50RR RAE50RRB SE50K 50 1.79 0.771
180
GRA-RR, GRA-RRB C
Standard Series M B
2
GRA-RR series bearings are the same as the RA-RR series and have
S
a provision for relubrication. GRA-RR series have cylindrical outside
G
diameters while GRA-RRB have spherical outside diameters. d1
d
L D
B
1
Recommended shaft tolerances: ⁄2"-115⁄16", nominal to -.0005", -.013mm; GRA-RRB Two Seals
2"-215/16", nominal to -.0010", -.025mm.
Spherical O.D.
B
1
1
TO ORDER, SPECIFY BEARING NUMBER FOLLOWED BY “AND COLLAR”. Example: GRA100RRB and Collar
(1)
Bearing Collar Basic Bore O.D. Ring S G L d1 B2 M B1 Brg. & Static Extended
Number Number Outer d D Widths Collar Wt. Load Dynamic
Ring Rating Load
Cylindrical Spherical Size B C Co Rating
O.D. O.D. Inner Outer CE
in. in. in. in. in. in. in. in. in. in. in. lbs lbs lbs
mm mm mm mm mm mm mm mm mm mm mm kg N N
1
GRA008RR GRA008RRB S1008K ⁄2 0.34 0.154
9 (2) 5 1 17 1
— GRA009RRB S1009K ⁄16 1.5748 0.750 0.512 0.256 0.494 ⁄32 1 ⁄8 ⁄32 0.107 1 ⁄8 0.32 0.145 1060 2360
5
GRA010RR GRA010RRB S1010K 203 ⁄8 40 19.05 13 6.5 12.55 4.0 28.6 13.5 2.72 28.6 0.28 0.127 4700 10600
GRAE17RR GRAE17RRB SE17K 17 0.28 0.127
3 5 5 17 7
GRA012RR GRA012RRB S1012K 204 ⁄4 1.8504 0.844 0.591
(3)
0.295 0.548 ⁄32 1 ⁄16 ⁄32 0.12 1 ⁄32 0.29 0.132 1400 3200
GRAE20RR GRAE20RRB SE20K 20 47 21.44 15 7.49 13.92 4.0 33.3 13.5 3.05 31 0.29 0.132 6200 14300
13
— GRA013RRB S1013K ⁄16 0.51 0.231
7 5 1 17 7
GRA014RR GRA014RRB S1014K 205 ⁄8 2.0472 0.844 0.591 0.295 0.548 ⁄32 1 ⁄2 ⁄32 0.142 1 ⁄32 0.47 0.213 1730 3550
15
— GRA015RRB S1015K ⁄16 52 21.44 15 7.49 13.92 4.0 38.1 13.5 3.61 31 0.44 0.2 7700 15800
GRA100RR GRA100RRB S1100K 1 0.41 0.186
GRAE25RR GRAE25RRB SE25K 25 0.41 0.186
1
GRA101RR GRA101RRB S1101K 1 ⁄16 0.77 0.349
1 5 47 5 13
GRA102RR GRA102RRB S1102K 1 ⁄8 2.4409 0.938 0.709 0.354 0.583 ⁄32 1 ⁄64 ⁄8 0.164 1 ⁄32 0.72 0.327 2500 4900
3
GRA103RR GRA103RRB S1103K 206 1 ⁄16 62 23.83 18 8.99 14.81 4.0 44.1 15.9 4.17 35.7 0.7 0.318 11100 21800
1
GRA103RR2 GRA103RRB2 S1103K3 1 ⁄4 0.65 0.295
GRAE30RR GRAE30RRB SE30K 30 0.7 0.318
1
GRA104RR GRA104RRB S1104K 1 ⁄4 1.24 0.562
5 5 1 43 17
— GRA105RRB S1105K 207 1 ⁄16 2.8346 1.000 0.748 0.374 0.626 ⁄32 2 ⁄8 ⁄64 0.145 1 ⁄32 1.19 0.54 3400 6400
3
— GRA106RRB S1106K 1 ⁄8 72 25.4 19 9.5 15.9 4.0 54.0 17.1 3.68 38.9 1.13 0.513 15100 28500
7
— GRA107RRB S1107K 1 ⁄16 1.05 0.476
GRAE35RR GRAE35RRB SE35K 35 1.13 0.513
1 3 3 23 23
1 ⁄2 ⁄16 2 ⁄8 ⁄32 0.164 1 ⁄32 1.53
(4)
GRA108RR GRA108RRB S1108K 3.1496 1.188 0.866 0.433 0.755 0.694 4400 8150
9
— GRA109RRB S1109K 208 1 ⁄16 80 30.18 22 11 19.18 4.8 60.3 18.3 4.17 43.7 1.43 0.649 19600 36000
GRAE40RR GRAE40RRB SE40K 40 1.43 0.649
5
— GRA110RRB S1110K 1 ⁄8 1.72 0.78
11 3 1 23 23
— GRA111RRB S1111K 209 1 ⁄16 3.3465 1.188 0.866 0.433 0.755 ⁄16 2 ⁄2 ⁄32 0.179 1 ⁄32 1.62 0.735 4500 8150
3
— GRA112RRB S1112K 1 ⁄4 85 30.18 22 11 19.18 4.8 63.5 18.3 4.55 43.7 1.5 0.68 20000 36000
— GRAE45RRB SE45K 45 1.5 0.68
13
— GRA113RRB S1113K 1 ⁄16 1.94 0.88
7 3 3 23 23
— GRA114RRB S1114K 1 ⁄8 3.5433 1.188 0.866 0.433 0.755 ⁄16 2 ⁄4 ⁄32 0.175 1 ⁄32 1.83 0.83 5100 8800
15
— GRA115RRB S1115K 210 1 ⁄16 90 30.18 22 11 19.18 4.8 69.9 18.3 4.44 43.7 1.70 0.771 22700 39200
— GRA115RRB2 S1115K2 2 1.58 0.717
— GRAE50RRB SE50K 50 1.79 0.771
181
YA-RR, YA-RRB C
Standard Series J
(1)
Bearing Basic Bore O.D. Ring S F J Set Brg. Static Extended
Number Outer d D Widths Screw Wt. Load Dynamic
Ring Size Rating Load
Cylindrical Spherical Size B C CO Rating
O.D. O.D. Inner Outer CE
in. in. in. in. in. in. in. in. lbs lbs lbs
mm mm mm mm mm mm mm mm kg N N
1 31
YA008RR YA008RRB ⁄2 1.5748 0.938 0.512(2) 0.313 ⁄32 0.187 10-32 0.19 1060 2360
5
YA010RR YA010RRB 203 ⁄8 40 23.8 13 7.95 24.6 4.75 M5X.8 0.09 4700 10600
YAE17RR YAE17RRB 17
3 9 1
YA012RR YA012RRB 204 ⁄4 1.8504 1.063 0.591(3) 0.349 1 ⁄64 0.237 ⁄4-28 0.3 1400 3200
YAE20RR YAE20RRB 20 47 27 15 8.86 29 6.02 M6X1 0.14 6200 14300
7
YA014RR YA014RRB 205 8 ⁄
15 21 1
YA015RR YA015RRB 16 ⁄ 2.0472 1.109 0.591 0.348 1 ⁄64 0.250 ⁄4-28 0.38 1730 3550
YA100RR YA100RRB 1 52 28.2 15 8.84 33.7 6.35 M6X1 0.17 7700 15800
YAE25RR YAE25RRB 25
1
YA102RR YA102RRB 1 ⁄8
3 37 5
YA103RR YA103RRB 206 1 ⁄16 2.4409 1.281 0.709 0.38 1 ⁄64 0.310 ⁄16-24(4) 0.58 2500 4900
1
YA103RR2 YA103RRB2 1 ⁄4 62 32.5 18 9.65 40.1 7.87 M8X1.25 0.26 11100 21800
YAE30RR YAE30RRB 30
1
YA104RR YA104RRB 1 ⁄4
3 27 5
YA106RR YA106RRB 207 1 ⁄8 2.8346 1.444 0.748 0.427 1 ⁄32 0.310 ⁄16-24 0.93 3400 6400
7
YA107RR YA107RRB 1 ⁄16 72 36.5 19 10.85 46.8 7.87 M8X1.25 0.42 15100 28500
YAE35RR YAE35RRB 35
1 1 5
YA108RR YA108RRB 208 1 ⁄2 3.1496 1.538 0.8661(5) 0.458 2 ⁄16 0.310 ⁄16-24 1.24 4000 8150
YAE40RR YAE40RRB 40 80 39.3 22 11.63 52.4 7.87 M8X1.25 0.56 17600 36000
5
YA110RR YA110RRB 1 ⁄8
11 9 5
YA111RR YA111RRB 209 1 ⁄16 3.3465 1.655 0.8861 0.53 2 ⁄32 0.310 ⁄16-24 1.18 4500 8150
3
YA112RR YA112RRB 1 ⁄4 85 42 22 13.46 57.9 7.87 M8X1.25 0.54 20000 36000
YAE45RR YAE45RRB 45
15 15 3
YA115RR YA115RRB 210 1 ⁄16 3.5433 1.746 0.8661 0.53 2 ⁄32 0.355 ⁄8-24 1.25 5100 8800
YA115RR2 YA115RRB2 2 90 44.3 22 13.46 62.7 9.02 M10X1.5 0.57 22700 39200
YAE50RR YAE50RRB 50
3 3
YA200RR YA200RRB 211 2 3.9370 1.833 0.9449 0.575 2 ⁄4 0.355 ⁄8-24 1.27 6400 10800
3
YA203RR YA203RRB 2 ⁄16 100 46.6 24 14.6 69.8 9.02 M10X1.5 0.58 28500 48000
YAE55RR YAE55RRB 55
(1) (4) 1
Bore tolerance is nominal to +.0005, .013mm YA103RR2 and YA103RRB2 use ⁄4-28 setscrew.
(2) (5)
Spherical O.D. outer ring width is .4724", 12mm Spherical O.D. outer ring width is .8268", 21mm
(3)
Spherical O.D. outer ring width is .5512", 14mm
182
GYA-RR, GYA-RRB C
Standard Series M J
B
1
(1)
Bearing Basic Bore O.D. Ring S F M J Set Brg. Static Extended
Number Outer d D Widths Screw Wt. Load Dynamic
Ring Size Rating Load
Cylindrical Spherical Size B C CO Rating
O.D. O.D. Inner Outer CE
in. in. in. in. in. in. in. in. in. lbs lbs lbs
mm mm mm mm mm mm mm mm mm kg N N
1 31
GYA008RR GYA008RRB ⁄2 1.5748 0.938 0.472 0.313 ⁄32 0.107 0.187 10-32 0.19 1060 2360
5
GYA010RR GYA010RRB 203 ⁄8 40 23.8 12 7.95 24.6 2.72 4.75 M5X.8 0.09 4700 10600
GYAE17RR GYAE17RRB 17
3 9 1
GYA012RR GYA012RRB 204 ⁄4 1.8504 1.063 0.551 0.349 1 ⁄64 0.12 0.237 ⁄4-28 0.3 1400 3200
GYAE20RR GYAE20RRB 20 47 27 14 8.86 29 3.05 6.02 M6X1 0.14 6200 14300
7
GYA014RR GYA014RRB 205 ⁄8
15 21 1
GYA015RR GYA015RRB 16⁄ 2.0472 1.109 0.591 0.348 1 ⁄64 0.142 0.250 ⁄4-28 0.38 1730 3550
GYA100RR GYA100RRB 1 52 28.2 15 8.84 33.7 3.61 6.35 M6X1 0.17 7700 15800
GYAE25RR GYAE25RRB 25
1
GYA102RR GYA102RRB 1 ⁄8
3 37 5
GYA103RR GYA103RRB 206 1 ⁄16 2.4409 1.281 0.709 0.38 1 ⁄64 0.164 0.310 ⁄16-24(2) 0.58 2500 4900
1
GYA103RR2 GYA103RRB2 1 ⁄4 62 32.5 18 9.65 40.1 4.17 7.87 M8X1.25 0.26 11100 21800
GYAE30RR GYAE30RRB 30
1
GYA104RR GYA104RRB 1 ⁄4
3 27 5
GYA106RR GYA106RRB 207 1 ⁄8 2.8346 1.444 0.748 0.427 1 ⁄32 0.145 0.310 ⁄16-24 0.93 3400 6400
7
GYA107RR GYA107RRB 1 ⁄16 72 36.5 19 10.85 46.8 3.68 7.87 M8X1.25 0.42 15100 28500
GYAE35RR GYAE35RRB 35
1 1 5
GYA108RR GYA108RRB 208 1 ⁄2 3.1496 1.538 0.8661 0.458 2 ⁄16 0.164 0.310 ⁄16-24 1.24 4000 8150
GYAE40RR GYAE40RRB 40 80 39.3 22 11.63 52.4 4.17 7.87 M8X1.25 0.56 17600 36000
5
GYA110RR GYA110RRB 1 ⁄8
11 9 5
GYA111RR GYA111RRB 209 1 ⁄16 3.3465 1.655 0.8661 0.53 2 ⁄32 0.179 0.310 ⁄16-24 1.18 4500 8150
3
GYA112RR GYA112RRB 1 ⁄4 85 42 22 13.46 57.9 4.54 7.87 M8X1.25 0.54 20000 36000
GYAE45RR GYAE45RRB 45
15 15 3
GYA115RR GYA115RRB 210 1 ⁄16 3.5433 1.746 0.8661 0.53 2 ⁄32 0.175 0.355 ⁄8-24 1.25 5100 8800
GYA115RR2 GYA115RRB2 2 90 44.3 22 13.46 62.7 4.44 9.02 M10X1.5 0.57 22700 39200
GYAE50RR GYAE50RRB 50
3 3
GYA200RR GYA200RRB 211 2 3.9370 1.833 0.9449 0.575 2 ⁄4 0.193 0.355 ⁄8-24 1.27 6400 10800
3
GYA203RR GYA203RRB 2 ⁄16 100 46.6 24 14.6 69.8 4.9 9.02 M10X1.5 0.58 28500 48000
GYAE55RR GYAE55RRB 55
(1) (2) 1
Bore tolerance is nominal to +.0005, .013mm GYA103RR2 and GYA103RRB2 use ⁄4-28 setscrew.
183
B1
TO ORDER, SPECIFY BEARING NUMBER FOLLOWED BY “AND COLLAR”. EXAMPLE: RAL100NPPB AND COLLAR.
(2)
Bearing Collar Basic Bore O.D. Ring S G F L d1 B2 B1 Static Extended
Number Number Outer d D Widths Load Dynamic
Ring Rating Load
Size B C CO Rating
Inner Outer CE
in. in. in. in. in. in. in. in. in. in. in. lbs lbs
mm mm mm mm mm mm mm mm mm mm N N
1 5 5 7 15
RAL008NPPB
(1)
LS008K ⁄2 1.3780 ⁄8 0.433 0.2116 0.4084 0.790 ⁄32 1 ⁄16 ⁄16 680 1700
9
RAL009NPPB LS009K 202 ⁄16 35 15.88 11 5.502 10.373 20.07 4 25.4 11.1 23.8 3000 7500
5
RAL010NPPB
(1)
LS010K ⁄8
3 21 1 11 7 31
RAL012NPPB
(1)
LS012K 9104 ⁄4 1.6535 ⁄32 0.472 0.2362 0.4198 0.990 ⁄8 1 ⁄64 ⁄16 ⁄32 1000 2320
42 16.67 12 6 10.663 25.15 3.2 29.8 11.1 24.6 4400 10400
13
RAL013NPPB LS013K ⁄16
7 11 5 27 15
RAL014NPPB LS014K 9105 ⁄8 1.8504 ⁄16 0.472 0.2362 0.4518 1.168 ⁄32 1 ⁄64 ⁄32 1 1120 2500
15
RAL015NPPB LS015K ⁄16 47 17.46 12 6 11.476 29.67 4 36.1 11.9 25.4 4900 11000
(1)
RAL100NPPB LS100K 1
1
RAL101NPPB LS101K 1 ⁄16
1 23 5 43 15 1
RAL102NPPB LS102K 9106 1 ⁄8 2.1654 ⁄32 0.512 0.2559 0.4628 1.43 ⁄32 1 ⁄64 ⁄32 1 ⁄32 1560 3350
3
RAL103NPPB LS103K 1 ⁄16 55 18.27 13 6.5 11.755 36.32 4 42.5 11.9 26.2 6950 14600
1
1 ⁄4
(1)
RAL103NPPB2 LS103K2
(1)
Also available with cylindrical O.D. (Delete suffix “B’ )
(2)
Bore tolerance is nominal to +.0005, .013mm
184
These wide inner ring ball bearings have either one or two Mechani-
Seals. Types KLB and KLLB have spherical outside diameters which S G
permit self-alignment when mounted in a housing with a correspond- D
ing spherical seat. d d1
L
All four types are prelubricated at the factory and require no
B
further lubrication.
These bearings are generally suitable for higher speed and/or
higher temperature applications. Because they incorporate non- KLLB Two Seals
contact seals, these bearings have very low rotational torque. Spherical O.D.
1
TO ORDER, SPECIFY BEARING NUMBER FOLLOWED BY “AND COLLAR”. EXAMPLE: 1100KLL AND COLLAR.
(4)
Bearing Number Collar Basic Bore O.D. Ring S&G L d1 B2 B1 Brg. & Static Extended
Number Outer d D Widths Collar Wt. Load Dynamic
Ring Rating Load
Cylindrical Cylindrical Size B C Co Rating
O.D. O.D. Inner Outer CE
in. in. in. in. in. in. in. in. in. lbs lbs lbs
(Spherical O.D.) mm mm mm mm mm mm mm mm mm kg N N
1
1008KL 1008KLL (KLLB) S1008K ⁄2 0.37 0.168
9 3 35 5 1 17 15
— 1009KLL S1009K 203 ⁄16 1.5748 1 ⁄32 0.4724 ⁄64 ⁄32 1 ⁄8 ⁄32 1 ⁄32 0.36 0.163 1060 2400
5
1010KL 1010KLL (KLLB) S1010K ⁄8 40 27.78 12 13.89 3.97 28.58 13.49 37.31 0.31 0.141 4700 10700
11
1011KL 1011KLL (KLLB) S1011K ⁄16 0.27 0.122
3 11 43 5 5 17 23
1012KL 1012KLL (KLLB) S1012K 204 ⁄4 1.8504 1 ⁄32 0.5512 ⁄64 ⁄32 1 ⁄16 ⁄32 1 ⁄32 0.46 0.209 1400 3200
47 34.13 14 17.06 3.97 33.34 13.5 43.7 6200 14300
13
— — S1013K ⁄16 0.63 0.286
7 3 11 5 1 17 47
1014KL 1014KLL (KLLB) S1014K 205 ⁄8 2.0472 1 ⁄8 0.5906 ⁄16 ⁄32 1 ⁄2 ⁄32 1 ⁄64 0.61 0.277 1730 3550
15
1015KL 1015KLL (KLLB) S1015K ⁄16 52 34.92 15 17.46 3.97 38.1 13.49 44.45 0.56 0.254 7700 15800
1100KL (KLB) 1100KLL (KLLB) S1100K 1 0.55 0.25
1
1101KL — S1101K 1 ⁄16 0.92 0.417
1 7 23 5 3 5 29
1102KL 1102KLL (KLLB) S1102K 206 1 ⁄8 2.4409 1 ⁄16 0.6299 ⁄32 ⁄32 1 ⁄4 ⁄8 1 ⁄32 0.91 0.413 2500 4900
3 (1)
1103KL (KLB) 1103KLL (KLLB) S1103K 1 ⁄16 62 36.51 16 18.26 3.97 44.1 15.88 48.42 0.82 0.372 11100 21800
1
1103KL3 1103KLL3 (KLLB3) S1103K3 1 ⁄4 0.79 0.358
1
1104KL 1104KLL (KLLB) S1104K 1 ⁄4 1.43 0.649
5 31 5 1 43 1
— 1105KLL (KLLB) S1105K 207 1 ⁄16 2.8346 1 ⁄64 0.6693 0.742 ⁄32 2 ⁄8 ⁄64 2 ⁄64 1.36 0.617 3400 6400
3 (2)
1106KL 1106KLL (KLLB) S1106K 1 ⁄8 72 37.70 17 18.85 3.97 54.0 17.46 51.2 1.28 0.581 15100 28500
7
1107KL (KLB) 1107KLL (KLLB) S1107 1 ⁄16 1.2 0.544
1 11 27 3 3 23 7
1108KL (KLB) 1108KLL (KLLB) S1108K 208 1 ⁄2 3.1496 1 ⁄16 0.7087 ⁄32 ⁄16 2 ⁄8 ⁄32 2 ⁄32 1.81 0.821 4000 8150
9 (3)
— 1109KLL (KLLB) S1109K 1 ⁄16 80 42.86 18 21.43 4.76 60.32 18.26 56.36 1.69 0.767 17600 36000
5 11 27 3 1 23 7
1110KL 1110KLL (KLLB) S1110K 1 ⁄8 3.3465 1 ⁄16 0.7480 ⁄32 ⁄16 2 ⁄2 ⁄32 2 ⁄32 2.06 0.934 4500 8150
11
1111KL 1111KLL (KLLB) S1111K 209 1 ⁄16 85 42.86 19 21.43 4.76 60.35 18.26 56.36 1.96 0.89 20000 36300
3
1112KL (KLB) 1112KLL (KLLB) S1112K 1 ⁄4 1.86 0.844
7 15 31 3 3 23 15
1114KL 1114KLL (KLLB) S1114K 210 1 ⁄8 3.5433 1 ⁄16 0.7874 ⁄32 ⁄16 2 ⁄4 ⁄32 2 ⁄32 2.37 1.075 5100 8800
15
1115KL (KLB) 1115KLL (KLLB) S1115K 1 ⁄16 90 49.21 20 24.61 4.76 69.9 18.26 62.71 2.25 1.021 22700 39000
3 3 3 13 13
1200KL (KLB) 1200KLL (KLLB) S1200K 2 3.9370 2 ⁄16 0.8268 1 ⁄32 ⁄16 3 ⁄16 2 ⁄16 3.4 1.54 6400 10800
1
— 1202KLL (KLLB) S1202K 211 2 ⁄8 100 55.56 21 27.98 4.76 76.2 20.64 71.44 3.1 1.406 28500 48000
3
1203KL 1203KLL (KLLB) S1203K 2 ⁄16 2.97 1.347
7 7 7 1 5 7 1
1207KL — S1207K 212 2 ⁄16 4.3307 2 ⁄16 0.8661 1 ⁄32 ⁄4 3 ⁄16 ⁄8 3 ⁄16 3.66 1.66 8000 13200
110 61.91 22 30.96 6.35 84.14 22.22 77.79 35600 58500
15 15 15 1 15 5
— 1215KLL (KLLB) S1215K 215 2 ⁄16 5.1181 2 ⁄16 0.9843 1 ⁄32 ⁄4 4 ⁄16 3 ⁄8 5 2.268 9800 15600
130 74.61 25 37.31 6.35 101.6 23.81 91.08 43600 69500
(1) (3)
Spherical O.D. outer ring width is .7087", 18mm Spherical O.D. outer ring width is .8268", 21mm
(2) (4) 1 3
Spherical O.D. outer ring width is .7480", 19mm Bore tolerance: /2"-2 /16", nominal to +.0005, .013mm
7 15
2 /16"-2 /16", nominal to +.0006, .015mm
185
B1
TO ORDER, SPECIFY BEARING NUMBER FOLLOWED BY “AND COLLAR”. EXAMPLE: G1015KLL AND COLLAR.
(1)
Bearing Collar Basic Bore O.D. Ring S&G L d1 B2 M B1 Brg. & Static Extended
Number Number Outer d D Widths Collar Wt. Load Dynamic
Ring Rating Load
Cylindrical Spherical Size B C Co Rating
O.D. O.D. Inner Outer CE
in. in. in. in. in. in. in. in. in. in. lbs lbs lbs
mm mm mm mm mm mm mm mm mm kg N N
1
— G1008KLLB S1008K ⁄2 0.33 0.150
9 3 35 5 1 17 15
— G1009KLLB S1009K 203 ⁄16 1.5748 1 ⁄32 0.4724 ⁄64 ⁄32 1 ⁄8 ⁄32 0.107 1 ⁄32 0.3 0.136 1060 2400
5
G1010KLL G1010KLLB S1010K ⁄8 40 27.78 12 13.9 4.0 28.6 13.5 2.72 37.3 0.31 0.141 4700 10700
11
G1011KLL G1011KLLB S1011K ⁄16 0.26 0.118
3 11 43 5 5 17 23
G1012KLL G1012KLLB S1012K 204 ⁄4 1.8504 1 ⁄32 0.5512 ⁄64 ⁄32 1 ⁄16 ⁄32 0.135 1 ⁄32 0.44 0.2 1400 3200
47 34.13 14 17.1 4.0 33.3 13.5 3.43 43.7 6200 14300
13
— G1013KLLB S1013K ⁄16 0.63 0.286
7 3 11 5 1 17 3
G1014KLL G1014KLLB S1014K 205 ⁄8 2.0472 1 ⁄8 0.5906 ⁄16 ⁄32 1 ⁄2 ⁄32 0.152 1 ⁄4 0.58 0.263 1730 3550
15
G1015KLL G1015KLLB S1015K ⁄16 52 34.92 15 17.5 4.0 38.1 13.5 3.86 44.45 0.54 0.245 7700 15800
G1100KLL G1100KLLB S1100K 1 0.49 0.222
1
G1101KLL — S1101K 1 ⁄16 0.93 0.422
1 7 23 5 3 5 29
G1102KLL G1102KLLB S1102K 206 1 ⁄8 2.4409 1 ⁄16 .7087 ⁄32 ⁄32 1 ⁄4 ⁄8 0.156 1 ⁄32 0.91 0.413 2500 4900
3
G1103KLL G1103KLLB S1103K 1 ⁄16 62 36.51 18 18.3 4.0 44.4 15.9 3.96 48.4 0.87 0.395 11100 21800
1
— G1103KLLB3 S1103K3 1 ⁄4 0.75 0.34
1
G1104KLL G1104KLLB S1104K 1 ⁄4 1.43 0.649
5 31 5 1 11 1
— G1105KLLB S1105K 207 1 ⁄16 2.8346 1 ⁄64 .7480 0.742 ⁄32 2 ⁄8 ⁄16 0.135 2 ⁄64 1.37 0.622 3400 6400
3
G1106KLL G1106KLLB S1106K 1 ⁄8 72 37.70 19 18.85 4.0 54.0 17.46 3.43 51.2 1.3 0.59 15100 28500
7
G1107KLL G1107KLLB S1107K 1 ⁄16 1.21 0.549
1 11 27 3 3 23 7
G1108KLL G1108KLLB S1108KT 208 1 ⁄2 3.1496 1 ⁄16 .8268 ⁄32 ⁄16 2 ⁄8 ⁄32 0.16 2 ⁄32 1.82 0.826 4000 8150
9
G1109KLL G1109KLLB S1109KT 1 ⁄16 80 42.86 21 21.4 4.8 60.3 18.3 4.06 56.4 1.73 0.785 17600 36000
5 11 27 3 1 23 7
G1110KLL G1110KLLB S1110K 1 ⁄8 3.3465 1 ⁄16 .8661 ⁄32 ⁄16 2 ⁄2 ⁄32 0.179 2 ⁄32 2.09 0.949 4500 8150
11
G1111KLL G1111KLLB S1111K 209 1 ⁄16 85 42.86 22 21.4 4.8 63.5 18.3 4.55 56.4 1.98 0.899 20000 36300
3
G1112KLL G1112KLLB S1112K 1 ⁄4 1.88 0.853
13 15 31 3 3 23 15
— G1113KLLB S1113K 1 ⁄16 3.5433 1 ⁄16 .9055 ⁄32 ⁄16 2 ⁄4 ⁄32 0.185 2 ⁄32 2.53 1.148 5100 8800
7
G1114KLL G1114KLLB S1114K 210 1 ⁄8 90 49.21 23 24.6 4.8 69.9 18.3 4.7 62.7 2.4 1.09 22700 39000
15
G1115KLL G1115KLLB S1115K 1 ⁄16 2.27 1.031
186
C
KLLG Special Series B2
with Wireloc
The KLLG wide inner ring bearing is exactly the same as the KLL type
except for a snap ring or wireloc in the outer ring. A wireloc mounting D1 S G
provides a convenient method of positively locating the bearing axially. D
d d1
L
Recommended shaft tolerances: 1
⁄2"-1 15⁄16", nominal to -.0005", -.013mm; B
2"-2 7⁄16", nominal to -.0010", -.025mm.
T
K
B1
(1)
1
Bearing Collar Basic Bore O.D. Ring S&G L d1 B2 B1 Snap Wire Dimensions Brg. & Static Extended
Number Number Outer d D Widths D1 T K Collar Wt. Load Dynamic
Ring Rating Load
Size B C Co Rating
Inner Outer CE
in. in. in. in. in. in. in. in. in. in. in. in. lbs lbs lbs
mm mm mm mm mm mm mm mm mm mm mm kg N N
1
1008KLLG S1008K ⁄2 0.38 0.173
9 3 35 5 1 17 15 3
1009KLLG S1009K 203 ⁄16 1.5748 1 ⁄32 0.4724 ⁄64 ⁄32 1 ⁄8 ⁄32 1 ⁄32 1 ⁄4 0.042 0.12 0.34 0.154 1060 2400
5
1010KLLG S1010K ⁄8 40 27.78 12 13.9 4.0 28.6 13.5 37.3 44.45 1.07 3.05 0.31 0.141 4700 10700
11
1011KLLG S1011K ⁄16 0.29 0.132
3 11 43 5 5 17 23 1
1012KLLG S1012K 204 ⁄4 1.8504 1 ⁄32 0.5512 ⁄64 ⁄32 1 ⁄16 ⁄32 1 ⁄32 2 ⁄16 0.042 0.136 0.45 0.204 1400 3200
47 34.13 14 17.1 4.0 33.3 13.5 43.7 52.39 1.07 3.45 6200 14300
13
1013KLLG S1013K ⁄16 0.6 0.272
7 3 11 5 1 17 47 17
1014KLLG S1014K 205 ⁄8 2.0472 1 ⁄8 0.5906 ⁄16 ⁄32 1 ⁄2 ⁄32 1 ⁄64 2 ⁄64 0.042 0.136 0.58 0.263 1730 3550
15
1015KLLG S1015K 16⁄ 52 34.92 15 17.5 4.0 38.1 13.5 44.1 57.55 1.07 3.45 0.54 0.245 7700 15800
1100KLLG S1100K 1 0.5 0.227
1 7 23 5 3 5 29 21
1101KLLG S1101K 1 ⁄16 2.4409 1 ⁄16 0.6299 ⁄32 ⁄32 1 ⁄4 ⁄8 1 ⁄32 2 ⁄32 0.065 0.190 0.94 0.427 2500 4900
1
1102KLLG S1102K 206 1 ⁄8 62 36.51 16 18.3 4.0 44.4 15.9 48.4 67.47 1.65 4.83 0.85 0.386 11100 21800
3
1103KLLG S1103K 1 ⁄16 0.85 0.386
1
1104KLLG S1104K 1 ⁄4 1.42 0.645
5 31 5 1 43 1 5
1105KLLG S1105K 207 1 ⁄16 2.8346 1 ⁄64 0.6693 0.742 ⁄32 2 ⁄8 ⁄64 2 ⁄64 3 ⁄64 0.065 0.190 1.33 0.604 3400 6400
3
1106KLLG S1106K 1 ⁄8 72 37.70 17 18.85 4.0 54.0 17.1 51.2 78.18 1.65 4.83 1.27 0.577 15100 28500
7
1107KLLG S1107K 1 ⁄16 1.19 0.54
1 11 27 3 3 23 7 13
1108KLLG S1108KT 208 1 ⁄2 3.1496 1 ⁄16 0.7087 ⁄32 ⁄16 2 ⁄8 ⁄32 2 ⁄32 3 ⁄32 0.065 0.190 1.82 0.826 4000 8150
9
1109KLLG S1109KT 1 ⁄16 80 42.86 18 21.4 4.8 60.3 18.3 56.4 86.52 1.65 4.83 1.73 0.785 17600 36000
5 11 27 3 1 23 7 19
1110KLLG S1110K 1 ⁄8 3.3465 1 ⁄16 0.7480 ⁄32 ⁄16 2 ⁄2 ⁄32 2 ⁄32 3 ⁄32 0.065 0.190 2.03 0.922 4500 8150
11
1111KLLG S1111K 209 1 ⁄16 85 42.86 19 21.4 4.8 63.5 18.3 56.4 91.28 1.65 4.83 1.94 0.881 20000 36300
3
1112KLLG S1112K 1 ⁄4 1.86 0.844
13 15 31 3 3 23 15 51
1113KLLG S1113K 1 ⁄16 3.5433 1 ⁄16 0.7874 ⁄32 ⁄16 2 ⁄4 ⁄32 2 ⁄32 3 ⁄64 0.095 0.22 2.28 1.035 5100 8800
7
1114KLLG S1114K 210 1 ⁄8 90 49.21 20 24.6 4.8 69.9 18.3 62.7 96.44 2.41 5.59 2.21 1.003 22700 39000
15
1115KLLG S1115K 1 ⁄16 2.14 0.971
187
Special Duty
The heavy GN-KLLB series ball bearings are similar in design to the
standard LL (Mechani-Seal) wide inner ring bearings but have heavier
section 300 series bearings. Unlike the standard series, however, the S G
seal in the heavy series is of three-piece construction and has two D
fixed inner members plus an external rotation slinger. d d1
L
1 B
Recommended shaft tolerances: ⁄8"-1 15⁄16", nominal to -.0005", -.013mm;
2"-2 15⁄16", nominal to -.0010", -.025mm.
B1
(1)
Bearing Collar Basic Bore O.D. Ring S G L d1 B2 M B1 Brg. & Static Extended
Number Number Outer d D Widths Collar Wt. Load Dynamic
Ring Rating Load
Size B C Outer Co Rating
Inner N-KLL GN-KLLB CE
in. in. in. in. in. in. in. in. in. in. in. lbs lbs lbs lbs
mm mm mm mm mm mm mm mm mm mm mm kg N N
1 7 11 3 5 15 11 31
GN102KLLB SN102K 1 ⁄8 2.8346 1 ⁄16 0.7480 0.7874 ⁄16 ⁄4 ⁄32 1 ⁄16 ⁄16 0.142 1 ⁄32 1.22 0.554 3550 7500
3
GN103KLLB SN103K 306 1 ⁄16 72 36.51 19 20 17.46 19.05 3.9 49.21 17.46 3.61 1.97 1.33 0.604 15800 33500
1 1 23 25 5 3 11 1
GN104KLLB SN104K 1 ⁄4 3.1496 1 ⁄2 0.8268 0.8661 ⁄32 ⁄32 ⁄32 2 ⁄16 ⁄16 0.156 2 ⁄32 1.43 0.649
3
GN106KLLB SN106K 307 1 ⁄8 38.10 21 22 18.3 19.84 3.9 55.6 17.46 3.96 51.59 1.54 0.699 4750 9150
7
GN107KLLB SN107K 1 ⁄16 80 1.61 0.731 21200 40500
1 5 25 27 3 1 13 1
GN108KLLB SN108K 308 1 ⁄2 3.5433 1 ⁄8 0.9055 0.9843 ⁄32 ⁄32 ⁄16 2 ⁄2 ⁄16 0.182 2 ⁄4 2.54 1.153 5850 11000
90 41.28 23 25 19.84 21.43 4.8 63.5 20.64 4.62 57.15 26100 49000
11 11 25 29 3 3 13 5
GN111KLLB SN111K 309 1 ⁄16 3.9370 1 ⁄16 0.9843 1.063 ⁄32 ⁄32 ⁄16 2 ⁄4 ⁄16 0.189 2 ⁄16 3.21 1.457 7100 13200
3
GN112KLLB SN112K 1 ⁄4 100 42.86 25 27 19.84 23.02 4.8 69.85 20.64 4.8 58.74 3.65 1.657 31600 58500
15 31 31 31 3 7 5
GN115KLLB SN115K 310 1 ⁄16 4.3307 1 ⁄32 1.063 1.1417 ⁄32 ⁄32 ⁄16 3 ⁄8 0.203 2 ⁄8 4.2 1.907 8500 15300
110 50 27 29 24.6 24.6 4.8 76.2 22.23 5.16 66.68 37900 68000
3 3 3 5 3 1 7 7
GN203KLLB SN203K 311 2 ⁄16 4.7244 2 ⁄16 1.1417 1.2205 1 ⁄32 1 ⁄32 ⁄16 3 ⁄4 ⁄8 0.216 2 ⁄8 5.22 2.37 9800 18000
120 55.56 29 31 27.8 29.37 4.8 82.55 22.23 5.49 73.02 43600 80000
7 7 7 7 1 1 15 1
GN207KLLB SN207K 312 2 ⁄16 5.1181 2 ⁄16 1.2205 1.2992 1 ⁄32 1 ⁄32 ⁄4 3 ⁄2 ⁄16 0.23 3 ⁄8 6.26 2.841 11600 20400
130 61.91 31 33 30.96 30.96 6.4 88.9 23.8 5.84 79.38 51700 90000
11 11 11 11 1 1 1
GN211KLLB SO211K 314 2 ⁄16 5.9055 2 ⁄16 1.378 1.4567 1 ⁄32 1 ⁄32 ⁄4 4 1 ⁄16 0.265 3 ⁄2 9.94 4.512 15000 26000
150 68.26 35 37 34.13 34.13 6.4 101.6 26.99 6.73 88.9 66800 116000
15 15 15 15 1 7 1 15
GN215KLLB SN215K 315 2 ⁄16 6.2992 2 ⁄16 — 1.5354 1 ⁄32 1 ⁄32 ⁄4 4 ⁄16 1 ⁄4 0.255 3 ⁄16 12.42 5.638 17000 28500
160 74.61 — 39 37.3 37.3 6.4 112.71 31.75 6.48 100.01 75700 125000
(1) 1 3
Bore tolerance : ⁄2"-2 /16", nominal to +.0005, .013mm
15
2 7⁄16"-2 ⁄16", nominal to +.0006, .015mm
188
O
Tri-Ply Seal Industrial Series C
Non-Relubricatable and M B2
Relubricatable Types
The non-relubricatable Tri-Ply Seal bearings are dimensionally S
interchangeable with KRRB bearings and can be used with standard F1
housings. The one piece Tri-Ply seals incorporate a highly effective d d
1D
seal design molded to an exterior shroud cap. The shroud cap protects L
B
the seal lip from fiber wrap and abrasion. These bearings, supplied
with a self-locking collar, are most effective in environments of severe
contamination and moisture.
The relubricatable Tri-Ply Seal bearings are dimensionally
interchangeable with G-KRRB bearings and can be used with standard
housings.
B1
Recommended shaft tolerances: a. heavy loads nominal to -.001", -.025mm;
b. light loads- nominal to -.002", -.050mm.
1
TO ORDER, SPECIFY BEARING NUMBER FOLLOWED BY “AND COLLAR”. EXAMPLE: G1115KPPB3 AND COLLAR.
(1)
Bearing Basic Bore O.D. Ring L d1 B2 S B1 M(2) F1 O Brg. & Static Extended
Number Outer d D Widths Collar Wt. Load Dynamic
Ring Rating Load
Size B C Co Rating
Inner Outer CE
Relubricatable Non-Relubricatable in. in. in. in. in. in. in. in. in. in. in. in. lbs lbs lbs
Type Type mm mm mm mm mm mm mm mm mm mm mm mm kg N N
13
G1013KPPB3 1013KPPB3 ⁄16 0.63 0.286
7 3 5 1 17 11 3
G1014KPPB3 1014KPPB3 205 ⁄8 2.0472 1 ⁄8 0.591 ⁄32 1 ⁄2 ⁄32 ⁄16 1 ⁄4 0.142 1.779 0.656 0.60 0.272 1730 3550
15
G1015KPPB3 1015KPPB3 16⁄ 52 34.92 15 3.9 38.1 13.5 17.5 44.4 3.61 45.19 16.66 0.56 0.254 7700 15800
G1100KPPB3 1100KPPB3 1 0.51 0.231
GE25KPPB3 E25KPPB3 25 0.51 0.231
1
G1101KPPB3 1101KPPB3 1 ⁄16 0.91 0.413
1 7 5 3 5 23 29
G1102KPPB3 1102KPPB3 1 ⁄8 2.4409 1 ⁄16 0.709 ⁄32 1 ⁄4 ⁄8 ⁄32 1 ⁄32 0.156 2.068 0.849 0.89 0.404 2500 4900
3
G1103KPPB3 1103KPPB3 206 1 ⁄16 62 36.51 18 3.9 44.4 15.9 18.3 48.4 4.19 52.53 21.56 0.83 0.376 11100 21800
1
G1103KPPB4 1103KPPB4 1 ⁄4 0.77 0.349
GE30KPPB3 E30KPPB3 30 0.83 0.376
1
G1104KPPB2 1104KPPB2 1 ⁄4 1.44 0.653
5 31 5 1 43 1
G1105KPPB2 1105KPPB2 207 1 ⁄16 2.8346 1 ⁄64 0.748 ⁄32 2 ⁄8 ⁄64 0.742 2 ⁄64 0.145 2.376 1.00 1.33 0.603 3400 6400
3
G1106KPPB2 1106KPPB2 1 ⁄8 72 37.70 19 3.9 54.0 17.1 18.85 51.2 3.68 60.35 25.40 1.26 0.572 15100 28500
7
G1107KPPB2 1107KPPB2 1 ⁄16 1.20 0.544
GE35KPPB2 E35KPPB2 35 1.26 0.572
1 11 3 3 23 27 7
G1108KPPB3 1108KPPB3 1 ⁄2 3.1496 1 ⁄16 0.827 ⁄16 2 ⁄8 ⁄32 ⁄32 2 ⁄32 0.223 2.669 0.923 1.74 0.789 4400 8150
9
G1109KPPB3 1109KPPB3 208 1 ⁄16 80 42.86 21 4.8 60.3 18.3 21.4 56.4 5.66 67.79 23.44 1.63 0.739 19600 36300
GE40KPPB3 E40KPPB3 40 1.63 0.739
5
G1110KPPB4 1110KPPB4 1 ⁄8 1.98 0.898
11 11 3 1 23 27 7
G1111KPPB4 1111KPPB4 209 1 ⁄16 3.3465 1 ⁄16 0.866 ⁄16 2 ⁄2 ⁄32 ⁄32 2 ⁄32 0.179 2.852 1.082 1.87 0.848 4500 8150
3
G1112KPPB4 1112KPPB4 1 ⁄4 85 42.86 22 4.8 63.5 18.3 21.4 56.4 4.55 72.44 27.48 1.82 0.826 20000 36300
GE45KPPB4 E45KPPB4 45 1.82 0.826
13
G1113KPPB3 1113KPPB3 1 ⁄16 2.46 1.116
7 15 3 3 23 31 15
G1114KPPB3 1114KPPB3 1 ⁄8 3.5433 1 ⁄16 0.906 ⁄16 2 ⁄4 ⁄32 ⁄32 2 ⁄32 0.185 3.059 1.083 2.28 1.034 5100 8800
15
G1115KPPB3 1115KPPB3 210 1 ⁄16 90 49.21 23 4.8 69.9 18.3 24.6 62.7 4.7 77.7 27.51 2.24 1.016 22700 39200
GE50KPPB3 E50KPPB3 50 2.24 1.016
189
O
GC-KRRB Industrial Series C
Concentric Collar M
Relubricatable Type
The GC-KRRB wide inner ring bearings are relubricatable with
spherical outside diameters and shroud seals. The metal shroud S S1
d d1
maintains tight seal contact against the inner ring and shields the D
rubber seals from damage due to dirt fiber wrap.
The concentric collar is locked to the shaft by two setscrews,
located 120° apart, which are mated with threaded holes in the collar
and drilled holes in the bearing inner ring. The extra-wide design
provides additional shaft support and extra large grease capacity.
1
Recommended shaft tolerances: ⁄2"-1 15/16", nominal to -.0005", -.013mm ;
2"-215⁄16", nominal to -.0010", -.025mm. B
TO ORDER, SPECIFY BEARING NUMBER . Example: GC1103KRRB (Concentric collar is assembled with bearing.)
(1)
Bearing Basic Bore O.D. Ring S S1 d1 M O Setscrew Brg. & Static Extended
Number Outer d D Widths Size Collar Wt. Load Dynamic
Ring Rating Load
Spherical Size B C Co Rating
O.D. Inner Outer CE
in. in. in. in. in. in. in. in. in. in. lbs lbs lbs
mm mm mm mm mm mm mm mm mm kg N N
1
GC1008KRRB ⁄2 0.34 0.154
5 3 7 39 11
GC1010KRRB 203 ⁄8 1.5748 1 ⁄64 0.472 ⁄16 ⁄64 ⁄32 0.107 0.579 10-32 0.32 0.145 1060 2360
11
GC1011KRRB ⁄16 40 26.59 12 11.1 15.5 34.1 2.72 14.71 M5x0.8 0.27 0.122 4700 10600
GCE17KRRB 17 0.27 0.122
3 7 31 47 1
GC1012KRRB 204 ⁄4 1.8504 1 ⁄32 0.551 ⁄64 ⁄64 1 ⁄2 0.135 0.814 10-32 0.45 0.204 1400 3200
GCE20KRRB 20 47 30.96 14 12.3 18.7 38.1 3.43 20.68 M5x0.8 0.45 0.204 6200 14300
7
GC1014KRRB 205 8 ⁄ 0.6 0.272
15 11 35 51 3 1
GC1015KRRB 16 ⁄ 2.0472 1 ⁄32 0.5905 ⁄64 ⁄64 1 ⁄4 0.142 0.777 ⁄4-28 0.56 0.254 1730 3550
GC1100KRRB 1 52 34.13 15 13.9 20.2 44.4 3.61 19.74 M6x1 0.51 0.231 7700 15800
GCE25KRRB 25 0.51 0.231
1
GC1102KRRB 206 1 ⁄8 0.89 0.404
3 15 37 57 1 1
GC1103KRRB 1 ⁄16 2.4409 1 ⁄32 0.709 ⁄64 ⁄64 2 ⁄16 0.156 0.965 ⁄4-28 0.83 0.376 2500 4900
1
GC1103KRRB3 1 ⁄4 62 37.31 18 14.7 22.6 52.4 4.19 24.51 M6x1 0.77 0.349 11100 21800
GCE30KRRB 30 0.83 0.376
1
GC1104KRRB 1 ⁄4 1.44 0.653
3 5 5 11 1
GC1106KRRB 207 1 ⁄8 2.8346 1 ⁄8 0.7481 ⁄8 1 2 ⁄32 0.145 1.018 ⁄4-28 1.26 0.572 3400 6400
7
GC1107KRRB 1 ⁄16 72 41.28 19 15.9 25.4 59.5 3.68 25.86 M6x1 1.20 0.544 15100 28500
GCE35KRRB 35 1.26 0.572
1 47 21 5 11 5
GC1108KRRB 208 1 ⁄2 3.1496 1 ⁄64 0.827 ⁄32 1 ⁄64 2 ⁄16 0.223 1.119 ⁄16-24 1.74 0.789 4000 8150
GCE40KRRB 40 80 44.05 21 16.7 27.4 68.3 5.66 28.42 M8x1.25 1.63 0.739 17600 36300
5
GC1110KRRB 1 ⁄8 1.98 0.898
11 27 11 5 7 5
GC1111KRRB 209 1 ⁄16 3.3465 1 ⁄32 0.866 1 ⁄16 1 ⁄32 2 ⁄8 0.179 1.268 ⁄16-24 1.87 0.848 4500 8150
3
GC1112KRRB 1 ⁄4 85 46.83 22 17.5 29.4 73 4.55 32.21 M8x1.25 1.82 0.826 20000 36300
GCE45KRRB 45 1.82 0.826
15 29 23 3 1 5
GC1115KRRB 210 1 ⁄16 3.5433 1 ⁄32 0.906 ⁄32 1 ⁄16 3 ⁄8 0.185 1.269 ⁄16-24 2.18 0.990 5100 8800
GCE50KRRB 50 90 48.42 23 18.3 30.2 79.4 4.7 32.23 M8x1.25 2.18 0.990 22700 39200
1 13 5 1 3
GC1200KRRB 2 3.9370 2 ⁄8 0.945 ⁄16 1 ⁄16 3 ⁄2 0.213 1.328 ⁄8-24 3.35 1.52 6400 10800
3
GC1203KRRB 211 2 ⁄16 100 53.97 24 20.6 33.3 88.9 5.41 33.73 M10x1.5 2.88 1.306 28500 48000
GCE55KRRB 55 2.88 1.306
7 3 29 15 3 3
GC1207KRRB 212 2 ⁄16 4.3307 2 ⁄8 1.063 ⁄32 1 ⁄32 3 ⁄4 0.202 1.379 ⁄8-24 3.45 1.565 8000 13200
GCE60KRRB 60 110 60.32 27 23.0 37.3 95.3 5.13 35.03 M10x1.5 35600 58800
15 25 1 23 1 3
GC1215KRRB 215 2 ⁄16 5.1181 2 ⁄32 1.142 1 ⁄16 1 ⁄32 4 ⁄2 0.219 1.506 ⁄8-20 5.82 2.64 9800 15600
GCE75KRRB 75 130 70.64 29 27.0 43.7 114.3 5.59 38.25 M10x1.5 43600 69500
(1) 3 3
Bore tolerances: 1 ⁄16"-2 ⁄16" nominal to +.0005, .013mm;
1 3
2 ⁄4"-3 ⁄16" nominal to +.0006", .015mm.
190
C
J
GY-KRRB Setscrew M
Industrial Series
D
This “Y” series extra wide inner ring setscrew bearing has increased d F
shaft support for HVAC and other industrial applications. The bearings
feature superfinished raceways, grade 10 balls, and antiback-out nylon
patch setscrews. They are factory prelubricated and are relubricatable.
Setscrew mounting feature is ideal for reversing load applications.
Recommended shaft tolerances: 1⁄2"-1 15/16", nominal to -.0005", -.013mm ;
2"-215⁄16", nominal to -.0010", -.025mm.
S S1
B
Bearing Basic Bore(1) O.D. Ring S S1 F M J Setscrew Static Extended
Number Outer d D Widths Size Load Dynamic
Ring Rating Load
Size B C Co Rating
Inner Outer CE
in. in. in. in. in. in. in. in. in. in. lbs lbs
GY1008KRRB
1
⁄2
mm mm mm mm mm mm mm mm mm mm N N
1
9
GY1009KRRB 203 ⁄16 1.5748 1.078 0.472 0.453 0.625 0.9 0.107 0.179 10-32 1000 2360
5
GY1010KRRB ⁄8 40 27.38 12 11.5 15.88 22.86 2.72 4.55 M5X.8 4400 10600
11
GY1011KRRB ⁄16
GYE15KRRB 15
GYE17KRRB 17
3
GY1012KRRB 204 ⁄4 1.8504 1.219 0.55 0.5 0.719 1.085 0.135 0.202 10-32 1400 3200
GYE20KRRB 20 47 30.96 14 12.7 18.26 27.56 3.43 5.13 M5X.8 6200 14300
13
GY1013KRRB ⁄16
7 1
GY1014KRRB 8 ⁄ 2.0472 1.343 0.591 0.562 0.781 1.332 0.152 0.248 ⁄4-28 1730 3550
15
GY1015KRRB 205 16 ⁄ 52 34.11 15 14.27 19.91 33.83 3.86 6.3 M6X1 7700 15800
GY1100KRRB 1
GYE25KRRB 25
1
GY1101KRRB 1 ⁄16
1 1
GY1102KRRB 206 1 ⁄8 2.4409 1.500 0.709 0.625 0.875 1.587 0.156 0.300 ⁄4-28 2500 4800
3
GY1103KRRB 1 ⁄16 62 38.1 18 15.88 22.22 40.31 3.96 7.62 M6X1 11000 21600
1
GY1103KRRB3 1 ⁄4
GYE30KRRB 30
1
GY1104KRRB 1 ⁄4
5 5
GY1105KRRB 207 1 ⁄16 2.8346 1.688 0.748 0.688 1 1.816 0.145 0.308 ⁄16-24 3400 6400
3
GY1106KRRB 1 ⁄8 72 42.87 19 17.48 25.4 46.18 3.68 7.82 M8X1.25 15100 28500
7
GY1107KRRB 1 ⁄16
GYE35KRRB 35
1 5
GY1108KRRB 208 1 ⁄2 3.1496 1.938 0.827 0.75 1.188 2.058 0.16 0.315 ⁄16-24 4400 8150
9
GY1109KRRB 1 ⁄16 80 49.22 21 19.05 30.17 52.27 4.06 8 M8X1.25 19600 36000
GYE40KRRB 40
5
GY1110KRRB 1 ⁄8
11 5
GY1111KRRB 209 1 ⁄16 3.3465 1.938 0.8661 0.75 1.188 2.28 0.179 0.315 ⁄16-24 4500 8150
3
GY1112KRRB 1 ⁄4 85 49.22 22 19.05 30.17 57.92 4.55 8 M8X1.25 20000 36000
GYE45KRRB 45
13
GY1113KRRB 1 ⁄16
7 3
GY1114KRRB 1 ⁄8 3.5433 2.031 0.8661 0.75 1.281 2.474 0.185 0.394 ⁄8-24 5100 8800
15
GY1115KRRB 210 1 ⁄16 90 51.59 22 19.05 32.54 62.84 4.7 10 M10X1.5 22700 39000
GY1115KRRB2 2
GYE50KRRB 50
GY1200KRRB 2
1 3
GY1201KRRB 211 2 ⁄16 3.9370 2.187 0.945 0.875 1.312 2.747 0.197 0.394 ⁄8-24 6400 10800
1
GY1202KRRB 2 ⁄8 100 55.55 24 22.22 33.32 69.77 5 10 M10X1.5 28500 48000
3
GY1203KRRB 2 ⁄16
GYE55KRRB 55
1
GY1204KRRB 2 ⁄4
5 3
GY1205KRRB 212 2 ⁄16 4.3307 2.562 1.063 1 1.562 3.011 0.202 0.394 ⁄8-24 8000 13200
3
GY1206KRRB 2 ⁄8 110 65.07 27 25.4 39.67 76.48 5.13 10 M10X1.5 35600 58500
7
GY1207KRRB 2 ⁄16
GYE60KRRB 60
5 7
GY1210KRRB 2 ⁄8 4.9213 2.75 1.102 1.062 1.687 3.422 0.2 0.472 ⁄16-20 8500 15600
11
GY1211KRRB 214 2 ⁄16 125 69.85 28 26.97 42.84 86.92 5.08 12 M12X1.75 37500 69500
GYE70KRRB 70
3
GY1212KRRB 2 ⁄4
7 7
GY1214KRRB 215 2 ⁄8 5.1181 3.063 1.142 1.312 1.75 3.619 0.219 0.472 ⁄16-20 9800 15600
15
GY1215KRRB 2 ⁄16 130 77.8 29 33.32 44.45 91.92 5.56 12 M12X1.75 43600 69500
GYE75KRRB 75
(1) 1
Bore tolerances: ⁄2"-2 3⁄16" nominal to +.0005, .013mm;
1 15
2 ⁄4"-3 ⁄16" nominal to +.0006",.015mm.
191
Medium Duty
C
GYM-KRRB Inserts M J
Setscrew Lock
The Fafnir GYM-KRRB series is designed to offer extended bearing
life, even in the most demanding industrial environments. This insert D
features a full width inner ring which provides extra support along d F
the shaft. This extra support feature, coupled with a flexible nylon
retainer, allows the GYM-KRRB inserts to operate for extended
periods with undersized shafts or misalignment conditions.
Fafnir’s GYM-KRRB series inserts are equipped with
a three-piece seal which protects against corrosion, contamination
and fiber wrap. These inserts also include nylon patch setscrews
which prevent setscrew back-out and provide superior holding
S S1
power, even in applications with severe vibration. B
in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm
1
GYM1100KRRB 206 1 2.4409 1.500 0.709 0.625 0.875 1.587 0.156 0.300 ⁄4 -28 0.94 2500 4900
62 38.10 18 15.88 22.22 40.31 3.96 7.62 M6 x 1 0.427 11100 21800
3 5
GYM1103KRRB 207 1 ⁄16 2.8346 1.688 0.748 0.688 1.000 1.816 0.145 0.308 ⁄16 -24 1.55 3400 6400
72 42.87 19 17.48 25.40 46.18 3.68 7.82 M8 x 1.25 0.704 15100 28500
7 5
GYM1107KRRB 208 1 ⁄16 3.1496 1.938 0.827 0.750 1.188 2.058 0.160 0.315 ⁄16 -24 1.8 4400 8150
80 49.22 21 19.05 30.17 52.27 4.06 8.00 M8 x 1.25 0.817 19600 36300
1 5
GYM1108KRRB 209 1 ⁄2 3.3465 1.938 0.866 0.750 1.188 2.280 0.179 0.315 ⁄16 -24 1.95 4500 8150
85 49.22 22 19.05 30.17 52.27 4.55 8.00 M8 x 1.25 0.885 20000 36300
11 3
GYM1111KRRB 210 1 ⁄16 3.5433 2.031 0.866 0.750 1.281 2.474 0.185 0.394 ⁄8 -24 2.8 5100 8800
3
1 ⁄4 90 51.59 22 19.05 32.54 62.84 4.70 10.00 M10 x 1.5 1.271 22700 39200
GYM1112KRRB 2.65 5100 8800
1.203 22700 39200
15 3
GYM1115KRRB 211 1 ⁄16 3.9370 2.187 0.945 0.875 1.312 2.747 0.197 0.394 ⁄8 -24 3.6 6400 10800
2 100 55.55 24 22.22 33.32 69.77 5.00 10.00 M10 x 1.5 1.634 28500 48100
GY1200KRRB 3.3 6400 10800
1.498 28500 48100
3 3
GYM1203KRRB 212 2 ⁄16 4.3307 2.562 1.063 1.000 1.562 3.011 0.202 0.394 ⁄8 -24 4.9 8000 13200
1
2 ⁄4 110 65.07 27 25.40 39.67 76.48 5.13 10.00 M10 x 1.5 2.225 35600 58800
GY1204KRRB 4.3 8000 13200
1.952 35600 58800
7 7
GYM1207KRRB 214 2 ⁄16 4.9213 2.750 1.102 1.062 1.687 3.422 0.200 0.472 ⁄16 -20 6.6 9650 15600
1
2 ⁄2 125 69.85 28 26.97 42.84 76.48 5.08 12.00 M12 x 1.75 2.996 43000 69500
GYM1208KRRB 6.3 9650 15600
2.86 43000 69500
11 7
GYM1211KRRB 215 2 ⁄16 5.1181 3.063 1.142 1.312 1.750 3.619 0.219 0.472 ⁄16 -20 6.7 9800 15600
130 77.80 29 33.32 44.45 91.92 5.56 12.00 M12 x 1.75 3.042 43600 69500
15 7
GYM1215KRRB 216 2 ⁄16 5.5118 3.063 1.142 1.312 1.750 3.619 0.219 0.472 ⁄16 -20 6.8 12000 18000
3 140 77.80 29 33.32 44.45 91.92 5.56 12.00 M12 x 1.75 3.087 53400 80200
GYM1300KRRB 12000 18000
53400 80200
192
ER Industrial Series X
T
Relubricatable Type M
Y
B 1
in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs.
mm mm mm mm mm mm mm mm mm mm mm mm mm kg
1
ER08* ⁄2 0.42 0.190
5 7 5 1 23 7 13 1 21 3 5 9
ER10* 204 ⁄8 1.8504 1 ⁄32 ⁄8 ⁄2 ⁄32 1 ⁄64 ⁄64 2 ⁄16 ⁄32 ⁄64 ⁄32 ⁄16 10 - 32 0.37 0.167 SM1012K
3
ER12* ⁄4 47 30.96 15.88 12.7 18.26 28.17 5.16 52.4 16.61 1.2 3.97 14.35 M5X.8 0.31 0.141
7
ER14* ⁄8 0.48 0.218
15 11 3 9 25 21 1 17 21 3 9 11 1
ER15 205 ⁄16 2.0472 1 ⁄32 ⁄4 ⁄16 ⁄32 1 ⁄64 ⁄4 2 ⁄64 ⁄32 ⁄64 ⁄64 ⁄16 ⁄4 - 28 0.43 0.195 SM1013K
ER16* 1 52 34.13 19.05 14.29 19.84 33.73 6.35 57.5 16.61 1.2 3.57 17.50 M6X1 0.40 0.181
1 1 7 5 7 19 19 21 45 1 7 51 1
ER18 206 1 ⁄8 2.4409 1 ⁄2 ⁄8 ⁄8 ⁄8 1 ⁄32 ⁄64 2 ⁄32 ⁄64 ⁄16 ⁄32 ⁄64 ⁄4 - 28 0.75 0.340 SM1101K
3
ER19 1 ⁄16 62 38.1 22.23 15.87 22.22 40.48 7.54 67.5 17.93 1.6 5.56 20.17 M6X1 0.69 0.313
1
ER20* 1 ⁄4 1.25 0.567
3 11 15 11 27 5 5 25 1 7 29 5
ER22* 207 1 ⁄8 2.8346 1 ⁄16 ⁄16 ⁄16 1 1 ⁄32 ⁄16 3 ⁄64 ⁄32 ⁄16 ⁄32 ⁄32 ⁄16 - 24 1.10 0.499 SM1104K
7
ER23* 1 ⁄16 72 42.86 23.81 17.46 25.4 46.83 7.94 78.2 19.76 1.6 5.56 23.11 M8X1.25 1.05 0.476
1 15 3 3 3 1 5 13 53 1 1 7 5
ER24* 208 1 ⁄2 3.1496 1 ⁄16 1 ⁄32 ⁄4 1 ⁄16 2 ⁄16 ⁄16 3 ⁄32 ⁄64 ⁄16 ⁄4 1 ⁄64 ⁄16 - 24 1.48 0.671 SM1108K
80 49.21 27.78 19.05 30.16 52.38 7.94 86.5 21.16 1.6 6.35 28.07 M8X1.25
11 15 3 3 3 9 5 19 53 1 1 7 5
ER27 209 1 ⁄16 3.3465 1 ⁄16 1 ⁄32 ⁄4 1 ⁄16 2 ⁄32 ⁄16 3 ⁄32 ⁄64 ⁄16 ⁄4 1 ⁄64 ⁄16 - 24 1.62 0.735 SM1110K
3
ER28* 1 ⁄4 85 49.21 27.78 19.05 30.16 57.94 7.94 91.3 21.16 1.6 6.35 28.07 M8X1.25 1.52 0.690
7 1 1 3 9 7 25 51 31 3 9 5 3
ER30 210 1 ⁄8 3.5433 2 ⁄32 1 ⁄8 ⁄4 1 ⁄32 2 ⁄16 ⁄64 3 ⁄64 ⁄32 ⁄32 ⁄32 1 ⁄64 ⁄8 - 24 1.88 0.853 SM1113K
15
ER31 1 ⁄16 90 51.59 28.58 19.05 32.54 55.66 9.92 96.4 24.66 2.4 7.14 27.31 M10X1.5 1.84 0.834
3 3 7 5 3 25 3 61 3 9 15 3
ER32* 211 2 3.9370 2 ⁄16 1 ⁄16 ⁄8 1 ⁄16 2 ⁄4 ⁄64 4 ⁄16 ⁄64 ⁄32 ⁄32 1 ⁄64 ⁄8 - 24 2.87 1.300 SM1200K
3
ER35 2 ⁄16 100 55.56 30.16 22.22 33.34 69.85 9.92 106.4 24.28 2.4 7.14 31.27 M10X1.5 2.39 1.084
7 9 1 9 1 25 37 7 3 17 29 3
ER39* 212 2 ⁄16 4.3307 2 ⁄16 1 ⁄4 1 1 ⁄16 3 ⁄64 ⁄64 4 ⁄64 1 ⁄64 ⁄32 ⁄64 1 ⁄64 ⁄8 - 24 3.20 1.450 SM1204K
110 65.09 31.75 25.4 39.69 76.60 9.92 116.3 28.24 2.4 6.75 36.83 M10X1.5
15 1 1 5 3 39 15 1 19 7 1 49 7
ER47 215 2 ⁄16 5.1180 3 ⁄16 1 ⁄2 1 ⁄16 1 ⁄4 3 ⁄64 ⁄32 5 ⁄2 1 ⁄64 ⁄64 ⁄4 1 ⁄64 ⁄16 - 20 4.88 2.210 SM1213K
130 77.79 38.1 33.33 44.45 91.68 11.91 139.7 33.02 2.8 6.35 44.78 M12X1.75
3 1 11 1 15 7 17 57 25 7 7 43 7
ER51 216 3 ⁄16 5.5110 3 ⁄16 1 ⁄16 1 ⁄8 1 ⁄16 3 ⁄8 ⁄32 5 ⁄64 1 ⁄64 ⁄64 ⁄16 1 ⁄64 ⁄16 - 20 7.61 3.450 SM1303K
140 77.79 42.86 28.58 49.21 98.43 13.49 149.6 35.32 2.8 11.11 42.47 M12X1.75
7 3 15 11 1 1 7 1 23 7 7 1 7
ER55 217 3 ⁄16 5.9051 3 ⁄8 1 ⁄16 1 ⁄32 2 ⁄32 4 ⁄8 ⁄16 6 ⁄4 1 ⁄64 ⁄64 ⁄16 2 ⁄64 ⁄16 - 20 — — SM1307K
150 85.72 49.21 34.16 51.57 104.84 11.91 159.5 34.53 2.8 11.02 51.21 M12X1.75
1 3
(1)
Bore tolerance: ⁄2"-2 ⁄16", nominal to +.0005", .013mm (2)
Use Cross Reference Bearing Numbers to locate Load Ratings on page 194.
1 15
2 ⁄4"-2 ⁄16", nominal to +.0006", .015mm
* ER-DD low drag/low torque version available
193
SM Industrial Series C
B2
C
B2
194
SMN010K
SMN011K
SMN010KB
SMN011KB
SN010K
SN011K
303
5
⁄
11
8
16⁄
1.8504
47
11
1 ⁄32 0.5512
34.13 14
43
17.07
⁄64 43
17.07
⁄64 1.021
25.93
5
4.0
⁄32 1 ⁄8
3
34.93
5
⁄8
15.88
13
1 ⁄16
46.05
0.53
0.48
0.24
0.218
1460
6550
3350
15000 1
3 3 5 3 5 7 5 27
SMN012K SMN012KB SN012K 304 ⁄4 2.0472 1 ⁄8 0.5906 ⁄8 ⁄4 1.151 ⁄32 1 ⁄16 ⁄8 1 ⁄32 0.5 0.227 1760 4000
52 34.93 15 15.9 19.05 29.24 4.0 36.51 15.88 46.83 7800 17600
13
SMN013K SMN013KB SN013K ⁄16 0.98 0.445
7 3 21 23 5 11 5 27
SMN014K SMN014KB SN014K 305 ⁄8 2.4409 1 ⁄8 0.6693 ⁄32 ⁄32 1.437 ⁄32 1 ⁄16 ⁄8 1 ⁄32 0.95 0.431 2750 5850
15
SMN015K SMN015KB SN015K 16⁄ 62 34.93 17 16.67 18.26 36.5 4.0 42.86 15.88 46.83 0.91 0.413 12200 26000
SMN100K SMN100KB SN100K 1 0.86 0.404
1 7 11 3 5 15 11 31
SMN101K SMN101KB SN101K 1 ⁄16 2.8346 1 ⁄16 0.7480 ⁄16 ⁄4 1.702 ⁄32 1 ⁄16 ⁄16 1 ⁄32 1.34 0.608 3550 7500
1
SMN102K SMN102KB SN102K 306 1 ⁄8 72 36.51 19 17.46 19.05 43.23 4.0 49.21 17.46 50 1.29 0.585 15600 33500
3
SMN103K SMN103KB SN103K 1 ⁄16 1.25 0.567
1
SMN104K SMN104KB SN104K 1 ⁄4 1.77 0.803
5 1 23 25 5 3 11 1
SMN105K SMN105KB SN105K 307 1 ⁄16 3.1496 1 ⁄2 0.8268 ⁄32 ⁄32 1.927 ⁄32 2 ⁄16 ⁄16 2 ⁄32 1.67 0.757 4750 9150
3
SMN106K SMN106KB SN106K 1 ⁄8 80 38.10 21 18.26 19.84 48.95 4.0 55.6 17.46 51.59 1.6 0.726 21200 40500
7
SMN107K SMN107KB SN107K 1 ⁄16 1.56 0.721
1 5 25 27 3 1 13 1
SMN108K SMN108KB SN108K 308 1 ⁄2 3.5433 1 ⁄8 0.9055 ⁄32 ⁄32 2.185 ⁄16 2 ⁄2 ⁄16 2 ⁄4 2.4 1.089 5850 11000
9
SMN109K SMN109KB SN109K 1 ⁄16 90 41.28 23 19.84 21.43 55.5 4.8 63.5 20.64 57.15 2.26 1.025 26100 49000
5 11 25 29 3 3 13 25
SMN110K SMN110KB SN110K 1 ⁄8 3.9370 1 ⁄16 0.9843 ⁄32 ⁄32 2.443 ⁄16 2 ⁄4 ⁄16 ⁄16 3.16 1.433 7100 13200
11
SMN111K SMN111KB SN111K 309 1 ⁄16 100 42.86 25 19.84 23.02 62.05 4.8 69.9 20.64 58.74 3 1.361 31600 58500
3
SMN112K SMN112KB SN112K 1 ⁄4 3 1.361
13 15 31 31 3 7 5
SMN113K SMN113KB SN113K 1 ⁄16 4.3307 1 ⁄16 1.063 ⁄32 ⁄32 2.708 ⁄16 3 ⁄8 2 ⁄8 4.18 1.896 8500 15300
7
SMN114K SMN114KB SN114K 310 1 ⁄8 110 49.21 27 24.61 24.61 68.78 4.8 76.2 22.2 66.68 3.98 1.805 37900 68000
15
SMN115K SMN115KB SN115K 1 ⁄16 3.83 1.737
5 3 (2)
(1)
Bore tolerance: ⁄8"-2 ⁄16", nominal to +.0005, .013mm For applications where thrust load exceeds 60% of radial load consult Timken Engineering.
1 (3)
3 ⁄4"- 4 3⁄16", nominal to +.0007", +.018mm. Order as MUOA assembly suggested.
7 15 (4)
4 ⁄16"-4 ⁄16", nominal to +.0008", +.020mm See page 260.
195
C
SM-S Industrial Series B2
B1
TO ORDER, SPECIFY BEARING NUMBER FOLLOWED BY “AND COLLAR”. EXAMPLE: SM1215KS AND COLLAR.
(1)
Bearing Collar Basic Bore O.D. Ring S&G F L d1 B2 B1 Brg. & Static Extended
Number Number Outer d D Widths Collar Wt. Load Dynamic
Ring Rating Load
Spherical Size B C CO Rating
O.D. Inner Outer CE
in. in. in. in. in. in. in. in. in. in. lbs lbs lbs
mm mm mm mm mm mm mm mm mm kg N N
3 11 5 1 17 47
SM1100KS S1100K 205S 1 2.2441 1 ⁄8 0.591 ⁄16 1.332 ⁄32 1 ⁄2 ⁄32 1 ⁄64 0.58 0.263 1730 3450
57 34.93 15 17.46 33.83 4.0 38.1 13.5 44.1 7700 15600
3 7 23 5 3 5 29
SM1103KS S1103K 206S 1 ⁄16 2.6772 1 ⁄16 0.6300 ⁄32 1.54 ⁄32 1 ⁄4 ⁄8 1 ⁄32 0.92 0.418 2500 4800
68 36.51 16 18.3 39.12 4.0 44.4 15.9 48.4 11100 21600
1 31 5 1 11 1
SM1104KS S1104K 207S 1 ⁄4 3.1102 1 ⁄64 0.669 0.742 1.816 ⁄32 2 ⁄8 ⁄16 2 ⁄64 1.6 0.726 3400 6400
7
SM1107KS S1107K 1 ⁄16 79 37.70 17 18.85 46.13 4.0 54.4 17.46 51.2 1.45 0.658 11500 28500
1 11 27 3 3 23 7
SM1108KS S1108KT 208S 1 ⁄2 3.4646 1 ⁄16 0.709 ⁄32 2.058 ⁄16 2 ⁄8 ⁄32 2 ⁄32 1.99 0.903 4400 8150
88 42.86 18 21.4 52.27 4.8 60.3 18.3 56.4 19600 36000
15 15 31 3 3 23 15
SM1115KS S1115K 210S 1 ⁄16 3.9370 1 ⁄16 0.7874 ⁄32 2.474 ⁄16 2 ⁄4 ⁄32 2 ⁄32 2.61 1.185 5100 8800
100 49.21 20 24.6 62.84 4.8 69.9 18.3 62.7 22700 39000
3 3 3 3 13 13
SM1203KS S1203K 211S 2 ⁄16 4.3307 2 ⁄16 0.8268 1 ⁄32 2.747 ⁄16 3 ⁄16 2 ⁄16 3.85 1.748 6400 10800
110 55.56 21 27.8 69.77 4.8 76.2 20.6 71.4 28500 48000
7 7 7 1 5 7 1
SM1207KS S1207K 212S 2 ⁄16 4.7244 2 ⁄16 0.8661 1 ⁄32 3.011 ⁄4 3 ⁄16 ⁄8 3 ⁄16 4.2 1.907 8000 13200
120 61.91 22 30.96 76.48 6.4 84.14 22.2 77.8 35600 58500
11 11 11 1 13 15 3
SM1211KS S1211KT 214S 2 ⁄16 5.5118 2 ⁄16 0.9449 1 ⁄32 3.422 ⁄4 3 ⁄16 ⁄16 3 ⁄8 6.55 2.974 9650 15600
140 68.26 24 34.13 86.92 6.4 96.84 23.81 79.4 43000 69500
15 15 15 1 15 5
SM1215KS S1215K 215S 2 ⁄16 5.7087 2 ⁄16 0.9843 1 ⁄32 3.619 ⁄4 4 ⁄16 3 ⁄8 7.8 3.541 9800 15300
145 74.61 25 37.3 91.92 6.4 101.6 23.81 92.08 43600 68000
3 3 19 1 3 15
SM1303KS S1303K 216S 3 ⁄16 6.1024 3 ⁄16 1.0236 1 ⁄32 3.874 ⁄4 4 ⁄8 1 3 ⁄16 9.14 4.15 12000 18000
155 80.96 26 40.48 98.4 6.4 111.13 25.4 100.01 53400 80000
7 7 23 1 7 3
SM1307KS S1307K 217S 3 ⁄16 6.4961 3 ⁄16 1.1024 1 ⁄32 4.127 ⁄4 4 ⁄16 1 4 ⁄16 10.33 4.69 13700 20800
165 87.31 28 43.66 104.83 6.4 112.71 25.4 106.36 61000 93000
(2) 15 15 31 1 1 1 15
SM1315WS S1315K 220S 3 ⁄16 7.874 3 ⁄16 1.3386 1 ⁄32 4.876 ⁄4 5 ⁄2 1 ⁄4 4 ⁄16 19.69 8.939 28500 38000
200 100.01 34 50 123.85 6.4 139.7 31.75 125.41 126900 170000
(1) 3 (2)
Bore tolerance: 1"-2 ⁄16", nominal to +.0005, +.013mm For applications where thrust load exceeds 60% of radial load consult Timken Engineering.
1 3
2 ⁄4"-3 ⁄16", nominal to +.0006, +.015mm
1 15
3 ⁄4"- 3 ⁄16", nominal to +.0007", +.018mm.
196
C
SMN-S Heavy Series B2
B1
TO ORDER, SPECIFY BEARING NUMBER FOLLOWED BY “AND COLLAR”. EXAMPLE: SMN215KS AND COLLAR. 1
Bearing Collar Basic Bore(1) O.D. Ring S G F L d1 B2 B1 Brg. & Static Extended
Number Number Outer d D Widths Collar Wt. Load Dynamic
Ring Rating Load
Size B C Co Rating
Inner Outer CE
in. in. in. in. in. in. in. in. in. in. in. lbs lbs lbs
mm mm mm mm mm mm mm mm mm mm kg N N
3 7 11 3 5 15 11 31
SMN103KS SN103K 306S 1 ⁄16 3.1496 1 ⁄16 .748 ⁄16 ⁄4 1.702 ⁄32 1 ⁄16 ⁄16 1 ⁄32 1.44 0.654 3550 7550
80 36.51 19 17.5 19.1 43.23 4.0 49.2 17.5 50.0 15600 33500
7 1 23 25 5 3 11 1
SMN107KS SN107K 307S 1 ⁄16 3.4646 1 ⁄2 0.8268 ⁄32 ⁄32 1.927 ⁄32 2 ⁄16 ⁄16 2 ⁄32 1.87 0.849 4750 9150
88 38.10 21 18.30 19.8 48.95 4.0 55.6 17.5 51.6 21200 40500
1 5 25 27 3 1 13 1
SMN108KS SN108KT 308S 1 ⁄2 3.9370 1 ⁄8 0.9055 ⁄32 ⁄32 2.185 ⁄16 2 ⁄2 ⁄16 2 ⁄4 2.96 1.344 5850 11000
100 41.28 23 19.80 21.4 55.5 4.8 63.5 20.6 57.2 26100 49000
11 11 25 29 3 3 13 5
SMN111KS SN111K 309S 1 ⁄16 4.3307 1 ⁄16 0.9843 ⁄32 ⁄32 2.443 ⁄16 2 ⁄4 ⁄16 2 ⁄16 3.73 1.693 7100 13200
110 42.86 25 19.80 23.0 62.05 4.8 69.9 20.6 58.7 31600 58500
15 15 31 31 3 7 5
SMN115KS SN115K 310S 1 ⁄16 4.7244 1 ⁄16 1.063 ⁄32 ⁄32 2.708 ⁄16 3 ⁄8 2 ⁄8 4.73 2.147 8500 15300
120 49.21 27 24.6 24.6 68.78 4.8 76.2 22.2 66.7 37900 68000
3 3 3 3 3 1 7 7
SMN203KS SN203K 311S 2 ⁄16 5.1181 2 ⁄16 1.1417 1 ⁄32 1 ⁄32 2.953 ⁄16 3 ⁄4 ⁄8 2 ⁄8 6.1 2.769 9800 18000
130 55.56 29 27.8 27.8 75.01 4.8 82.6 22.2 73.00 43600 80000
7 7 7 7 1 1 15 1
SMN207KS SN207K 312S 2 ⁄16 5.7087 2 ⁄16 1.2205 1 ⁄32 1 ⁄32 3.21 ⁄4 3 ⁄2 ⁄16 3 ⁄8 7.5 3.405 11600 20400
145 61.91 31 31 31 81.53 6.4 88.9 23.8 79.4 51700 90000
11 11 11 11 1 1 5
SMN211KS SO211K 314S 2 ⁄16 6.4961 2 ⁄16 1.378 1 ⁄32 1 ⁄32 3.731 ⁄4 4 1 ⁄16 3 ⁄8 11.42 5.185 15000 26000
165 68.26 35 34.10 34.1 94.7 6.4 101.6 27.0 92.1 66800 116000
15 15 15 15⁄ 1 7 1 15
SMN215KS SN215K 315S 2 ⁄16 6.8898 2 ⁄16 1.4567 1 ⁄32 1 32 3.952 ⁄4 4 ⁄16 1 ⁄4 3 ⁄16 14.22 6.456 17000 28500
175 74.61 37 37.3 37.3 100.38 6.4 112.7 31.8 100.0 75700 125000
3 3 19 19 1 11 1 3
SMN303KS SN303K 316S 3 ⁄16 7.4803 3 ⁄16 1.5354 1 ⁄32 1 ⁄32 4.209 ⁄4 4 ⁄16 1 ⁄4 4 ⁄16 17.71 8.04 19300 30500
190 80.96 39 40.5 40.5 106.91 6.4 119.10 31.8 106.4 86000 137000
7 7 23 23 5 1 7 9
SMN307KS SN307K 318S 3 ⁄16 8.2677 3 ⁄16 1.6929 1 ⁄32 1 ⁄32 4.729 ⁄16 5 ⁄4 1 ⁄16 4 ⁄16 25.97 1.79 24000 35500
210 87.31 43 43.7 43.7 120.12 7.9 133.4 36.5 115.9 106900 156000
11 11 17 5 5 1 7 13
SMO311WS-BR SO311K 319WB 3 ⁄16 8.6608 3 ⁄16 1.768 1 ⁄32 2 ⁄32 4.982 ⁄16 5 ⁄2 1 ⁄16 4 ⁄16 33.0 16.3 37500 50000
220 93.66 45 38.89 54.77 126.53 7.94 139.7 36.51 122.24 166000 224000
15 15 31 31 5 3 7 1
SMN315KS SN315K 320S 3 ⁄16 9.252 3 ⁄16 1.8504 1 ⁄32 1 ⁄32 5.306 ⁄16 5 ⁄4 1 ⁄16 5 ⁄16 34.85 15.822 31500 43000
235 100.01 47 50 50 134.77 7.9 146.0 36.5 128.6 140300 193000
(2) 7 3 15 1 5 1 11 9
SMN407WS-BR SN407K 322S 4 ⁄16 10.4331 4 ⁄16 1.9685 1 ⁄16 2 ⁄4 5.92 ⁄16 6 ⁄2 1 ⁄16 5 ⁄16 47.28 21.465 55000 63000
265 106.36 50 49.20 57.2 150.37 7.9 168.3 42.9 141.3 245000 280000
(2) 15 9 1 7 5 1 11 15
SMN415WS-BR SN415K 326S 4 ⁄16 11.811 4 ⁄16 2.3228 2 ⁄8 2 ⁄16 6.951 ⁄16 8 ⁄8 1 ⁄16 5 ⁄16 74.39 33.773 73500 78000
300 115.89 59 54.0 61.9 176.56 7.9 206.4 42.9 150.8 327400 345000
(1) 15 3 (2)
Bore tolerance: ⁄16"-2 ⁄16", nominal to +.0005, +.013mm For applications where thrust load exceeds 60% of radial load consult Timken Engineering.
1 3
2 ⁄4"-3 ⁄16", nominal to +.0006, +.015mm
1 3
3 ⁄4"-4 ⁄16", nominal to +.0007", +.018mm.
7 15
4 ⁄16"-4 ⁄16", nominal to +.0008", +.020mm.
197
AK low base
AO heavy series
AS high base
C cylindrical cartridge *Options:
CJ four bolt mount C concentric collar
CJT two bolt mount H heavy housing PT Polymer housing with TDC bearing
SA high base L expansion unit NT nickel plated with TDC bearing
TU take-up unit M medium duty ZT zinc plated with TDC bearing
R AK * 1 NT
L labyrinth seal with self-locking collar Bore Size
R contact shroud seal with self-locking collar inch 1⁄2" - 215⁄16"
S contact shroud seal, narrow inner ring, setscrew lock metric 15 - 75 mm
T Tri-Ply shroud seal with self-locking collar
V contact shroud seal, narrow inner ring, self-locking collar
Y contact shroud seal, with wide inner ring, setscrew lock
198 TORRINGTON
Fafnir
Housed Units
Page Page
FAFNIR HOUSED UNITS FLANGED UNITS/CAST IRON (continued)
1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200 FLCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201 RFC (Concentric Collar) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235
Survivor PT/NT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202-203 GVFD(R), VFD(R) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236
PILLOW BLOCKS/CAST IRON GRFD(R), RFD(R) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237
RAK, TAK, LAK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204 GVFTD(R), VFTD(R) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238
YAK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205 GRFTD(R), RFTD(R) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239
VAK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206 RC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240
RAS, TAS, LAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207 PILLOW BLOCKS/PRESSED STEEL
RASC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208 PBS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241
YAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209 PB, RPB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242
VAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210
FLANGED UNITS/PRESSED STEEL
SAS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
VFMST, LFST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243
RAKH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212
RAKHL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212 FLANGETTES/PRESSED STEEL
199
INTRODUCTION
Ball Bearing housed units originated by Timken's own Fafnir line, are unnecessary for the user to refine his design in excess of practical
available in a wide variety of types and sizes to accomodate a limits. If desired, units incorporating prelubricated wide inner ring
complete range of operating conditions. bearings may be furnished without grease fittings.
These units generally have cast iron housings and are designed There are several basic types of housed units available; Pillow
for mounting on straight shafts with a slip fit. The self-locking collar Blocks, Flanged Cartridges, Flangette Units, Cylindrical Cartridges
and the setscrew inner bearing designs provide ease in mounting, and Take-up Units. The type required is generally determined by its
bolt holes in housings take standard bolts for assembling these units application and mounting requirments. Within the basic type
to machinery frames. Several series are also available with the selected, numerous variations allow for load factors, shaft sizes,
concentric locking collar. mounting surface dimensions, base to shaft centerline heights and
As most of these units are made with a self aligning feature, it is lubrication requirements.
PILLOW BLOCKS
Pillow blocks, the most commonly used type of mounted units, are
designed to provide shaft support where the mounting surface is
parallel to the shaft axis. The bolt holes are usually slotted for
adjustment during mounting.
Pillow blocks are supplied in both standard and heavy duty series.
Pressed steel and rubber pillow blocks are also available for light duty
applications.
FLANGED CARTRIDGES
Flanged cartridges are used where a shaft passes through the
machine frame at a right angle. A four bolt mounting is the most
common, however, where the mounting area is restricted, three and
two bolt versions are available. A piloted flanged cartridge, also
available, provides additional mounting accuracy and support.
Flanged cartridges are supplied in both standard and heavy duty
series. Iron and rubber flanged cartridges are also available.
A complete line of Flangette Units, pressed steel flanged car-
tridges, provides an economical solution to light duty applications.
Two, three and four bolt mountings are available along with a
relubricable version.
CYLINDRICAL CARTRIDGES
Cylindrical cartridges, like flanged cartridges, provide shaft support
where the shaft axis is perpendicular to and passing through a
machined housing which is generally very thick. The outside diameter
of the cylindrical cartridges permits mounting with a press fit into a
straight, through-bored housing.
Cylindrical cartridges have a machined spherical bearing seat to
provide initial shaft alignment in standard duty applications. Synthetic,
conductive rubber cylindrical cartridges are also available for
applications where low cost, light duty, low noise operation is
essential.
TAKE-UP UNITS
Take-up units are used where shaft adjustment and belt tightening
devices are required, such as conveyor applications. Frames for take-
up units provide for either side or top mounting.
200
1. Slip the shaft through the pillow block or other Fafnir housed unit
which incorporates the wide inner ring bearing. Be certain the
bearing is aligned in position along the shaft to eliminate any
possibility of cramping loads.
1
2. Fasten the unit securely to the base using the proper bolt size.
3. Place the self-locking collar on the shaft with its cam adjacent to the
cam on the end of the bearing’s inner ring. Turn the collar in the
direction of shaft rotation. The eccentric recessed cam will slide over
and engage the corresponding cam on the bearing inner ring.
4. Using a lightweight hammer and a drift pin inserted in the drift pin
hole strike in the direction of shaft rotation to positively engage the
collar. The wide inner ring is now locked to the shaft.
201
All bearing inserts and locking collars are given the proprietary Timken
Fafnir TDC ® coating for superior corrosion protection. This coating is a
thin, dense chrome coating that will not crack or peel under known
application conditions. The bearing housings are available as high-
base and low base pillow blocks, and 2-bolt and 4-bolt flanged
cartridges for popular shaft sizes of 3/4" through 1 1/2" and 20mm
through 40 mm diameters. Bearing inserts are available with the self
locking collar or the setscrew locking device. The SURVIVOR PT
assemblies are dimensionally interchangeable with the current line of
Fafnir cast iron housed units.
Ordering information:
To order complete SURVIVOR polymer assemblies, simply add the “PT”
suffix to Fafnir’s current cast iron housed unit designations.
Example:
YCJT 1 PT or RAK 3/4 PT
PT Series
COMPONENT MATERIAL COMPONENT MATERIAL
BaIls Stainless Steel Grease Fitting Stainless Steel
Ball Retainer Nylon Grease Fitting Cover Nylon
Collar Fafnir TDC coated Rings Fafnir TDC coated
Crush Bushing Stainless Steel Seals Synthetic Rubber
Grease FDA Approved Seal Caps Stainless Steel
Housing Polymer Setscrew Stainless Steel
202
The SURVIVOR NT series units are available as high base and low
base pillow blocks, and 2-bolt and 4-bolt flanged cartridges for popular
shaft sizes of 1/2" through 2 15/16" (and selected metric diameters). Fafnir
also produces a take-up unit in the SURVIVOR NT series in limited
shaft sizes (RTU-NT). The bearing inserts are available with self-locking
collars. The SURVIVOR NT series is dimensionally interchangeable
with the current line of Fafnir cast iron housed units.
Ordering information:
To order complete SURVIVOR nickel-plated assemblies, simply add the
“NT” suffix to Fafnir’s current cast iron housed unit designations.
Example:
RCJT 1 NT or RAK 3/4 NT
NT Series
COMPONENT MATERIAL COMPONENT MATERIAL
Balls Stainless Steel Grease Fitting Stainless Steel
Ball Retainer Nylon Grease Fitting Cover Nylon
Collar Fafnir TDC coated Seals Synthetic Rubber
Rings Fafnir TDC coated Seal Caps Stainless Steel
(1)
Grease FDA Approved Setscrew Stainless Steel
Housing Finish Nickel plating
(1)
Standard SURVIVOR NT units are only available in the “R” series, self-locking collar types.
Setscrew lock series (“Y”) units are available for minimum quantity orders.
203
N1
Timken Fafnir RAK, TAK and LAK pillow blocks are recommended for
industrial applications where normal loads are encountered. They 45°
N
assure the user the advantages of a compact, one piece housing which
can be mounted in any position. The pillow blocks are self-aligning at H2 d1
mounting with the spherical outside diameter of the bearing fitting into a
H
corresponding spherical housing seat. These units are prelubricated
and ready for immediate installation. A grease fitting provides for H1
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: RAK 1 7⁄16", POPULAR SIZES ARE IN BOLD
204
Setscrew Units H2
F
Fafnir YAK series low base, setscrew, pillow blocks feature the new H
GY- KRRB bearing. This full width inner ring setscrew unit is well suited H1
Bearing Data
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: YAK 1 7⁄16", POPULAR SIZES ARE IN BOLD
Unit Shaft H H2 B L J J J A H1 F S1 E Bolt Bearing
Diam. MIN MAX Size Number 1
in. in. in. in. in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm
1 1 3 5 7 5 3 1 3 11 5 7 3
YAK ⁄2 1 ⁄16 2 ⁄32 1 ⁄64 4 ⁄8 3 ⁄8 2 ⁄4 4 ⁄2 1 ⁄16 ⁄32 0.9 ⁄8 1 ⁄32 ⁄8 GY1008KRRB
5
YAK ⁄8 26.99 53.2 27.4 123.8 92.1 69.8 114.4 30.2 8.7 22.86 15.9 30.95 10 GY1010KRRB
YAK 17 GYE17KRRB
1 15 7 25 9 1 15 23 11 3
1 ⁄4 ⁄32 1 ⁄32 ⁄32 4 ⁄16 1 ⁄4 ⁄32 ⁄32 1 ⁄32 ⁄8
3
YAK ⁄4 2 5 3 3 1.085 GY1012KRRB
YAK 20 31.75 62.7 30.9 127 96 76.2 155.8 31.8 11.9 27.56 18.3 34.13 10 GYE20KRRB
7
YAK ⁄8 GY1014KRRB
15 5 11 11 1 1 5 15 13 15 25 31 3
YAK 16⁄ 1 ⁄16 2 ⁄16 1 ⁄32 5 ⁄2 4 ⁄8 3 ⁄16 4 ⁄16 1 ⁄32 ⁄32 1.332 ⁄32 1 ⁄64 ⁄8 GY1015KRRB
YAK 1 33.34 68.3 34.1 139.7 104.8 84.1 125.4 35.7 11.9 33.83 19.8 37.7 10 GY1100KRRB
YAK 25 GYE25KRRB
1
YAK 1 ⁄8 GY1102KRRB
9 5 1 3 5 11 9 9 17 7 21 1
1 ⁄16 3 ⁄32 1 ⁄2 6 ⁄16 4 ⁄8 ⁄16 5 ⁄16 1 ⁄16 ⁄32 ⁄8 1 ⁄32 ⁄2
3
YAK 1 ⁄16 3 1.587 GY1103KRRB
1
YAK 1 ⁄4S 39.69 80.2 38.1 157.2 117.5 93.7 141.3 39.7 13.5 40.31 22.2 42.07 12 GY1103KRRB3
YAK 30 GYE30KRRB
1
YAK 1 ⁄4 GY1104KRRB
3 13 5 11 9 1 5 3 25 21 57 1
YAK 1 ⁄8 1 ⁄16 3 ⁄8 1 ⁄16 6 ⁄16 5 ⁄8 4 ⁄32 6 ⁄32 1 ⁄32 ⁄32 1.816 1 1 ⁄64 ⁄2 GY1106KRRB
7
YAK 1 ⁄16 46.04 92.1 42.9 166.7 130.2 105.6 154.8 45.2 16.7 46.13 25.4 48.02 12 GY1107KRRB
YAK 35 GYE35KRRB
15 15 15 1 3 11 13 7 3 3 1 1
1 ⁄16 ⁄16 ⁄16 7 ⁄16 5 ⁄8 4 ⁄32 6 ⁄32 1 ⁄8 ⁄4 1 ⁄16 2 ⁄8 ⁄2
1
YAK 1 ⁄2 3 1 2.058 GY1108KRRB
YAK 40 49.21 100 49.2 179.4 136.5 110.3 162.7 47.6 19 52.27 30.2 53.98 12 GYE40KRRB
5
YAK 1 ⁄8 GY1110KRRB
1 1 15 17 7 3 11 3 3 1
2 ⁄16 4 ⁄8 ⁄16 7 ⁄32 5 ⁄8 4 ⁄4 ⁄16 1 ⁄16 2 ⁄16 ⁄2
11
YAK 1 ⁄16 1 7 2 2.28 GY1111KRRB
3
YAK 1 ⁄4 52.39 104.8 49.2 191.3 149.2 120.7 177.8 50.8 17.5 57.92 30.2 55.56 12 GY1112KRRB
YAK 45 GYE45KRRB
3 7 1 7 7 7 7 3 11 9 3 5
2 ⁄16 4 ⁄16 2 ⁄32 7 ⁄8 6 ⁄32 5 ⁄32 7 ⁄32 2 ⁄16 ⁄16 1 ⁄32 2 ⁄8 ⁄8
15
YAK 1 ⁄16 2.474 GY1115KRRB
YAK 2S 55.56 112.7 51.6 200 158 132.6 183.4 55.6 17.5 62.84 32.5 60.33 16 GY1115KRRB2
YAK 50 GYE50KRRB
7 29 3 3 15 25 3 5 3 5 7 5
YAK 2 2 ⁄16 4 ⁄32 2 ⁄16 8 ⁄4 6 ⁄16 5 ⁄32 8 ⁄32 2 ⁄16 ⁄4 2.747 1 ⁄16 2 ⁄16 ⁄8 GY1200KRRB
3
YAK 2 ⁄16 61.91 124.6 55.6 222.3 176.2 146.9 205.6 58.7 19 69.77 33.3 61.91 16 GY1203KRRB
YAK 55 GYE55KRRB
1 11 13 9 7 13 1 9 3 7 9 3 5
YAK 2 ⁄4 2 ⁄16 5 ⁄32 2 ⁄16 9 ⁄16 7 ⁄32 6 ⁄4 8 ⁄16 2 ⁄8 ⁄8 3.011 1 ⁄16 2 ⁄4 ⁄8 GY1204KRRB
7
YAK 2 ⁄16 68.26 137.3 65.1 239.7 188.1 158.8 217.5 60.3 22.2 76.48 39.1 69.85 16 GY1207KRRB
YAK 60 GYE60KRRB
11 1 3 1 5 3 7 5 11 1 3
YAK 2 ⁄16 3 6 ⁄16 2 ⁄4 10 ⁄2 8 6 ⁄8 9 ⁄8 2 ⁄8 1 ⁄16 3.422 1 ⁄16 3 ⁄8 ⁄4 GY1211KRRB
YAK 70 76.2 154 69.9 266.7 203.2 168.3 238.1 73 33.3 86.92 42.9 79.4 20 GYE70KRRB
15 5 7 1 1 1 3 1 1 3 3 3
YAK 2 ⁄16 3 ⁄16 6 ⁄16 3 ⁄16 12 9 ⁄2 8 ⁄4 10 ⁄4 3 ⁄4 1 ⁄2 3.619 1 ⁄4 3 ⁄8 ⁄4 GY1215KRRB
YAK 75 84.14 163.5 77.8 304.8 241.3 209.5 223.1 82.5 38.1 91.92 44.4 85.73 20 GYE75KRRB
205
Fafnir’s proven RAK housing and unique RA-RR extended inner ring 45°
bearing. The RA-RR bearing employs a positive contact land-riding N
seal and a Fafnir originated self-locking collar to assure positive shaft B1
H2 d1
retention. The VAK pillow block can be mounted and will operate in
any position. Bearing housed units are factory prelubricated but a H
grease fitting is provided to allow for relubrication if required. H1
1
Recommended shaft tolerances: ⁄2"-1 15⁄16", nominal to -.0005", -.013mm; E
J S1 T
2"-2 3⁄16", nominal to -.0010", -.025mm.
F
L A
Bearing Data
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. EXAMPLE: VAK 1", POPULAR SIZES ARE IN BOLD.
206
RAS,TAS, LAS N1
B1
Industrial Series N
45°
Fafnir RAS, TAS and LAS pillow blocks are similar in design and equal H2 d1
in load carrying capacity to the RAK, TAK and LAK types but have a H
slightly higher base to center height dimension to make them inter- H1
changeable with certain other competitive designs.
The RAS pillow block is equipped with G-KRRB (R-Seal) wide inner E
J S1 T
ring bearings, the TAS with G-KPPB (Tri-Ply Seal) wide inner ring F
L A
bearings, and the LAS with the G-KLLB (Mechani-Seal) wide inner ring
bearings.
Contact Timken Engineering to discuss highly corrosive Bearing Data
applications (i.e. food processing, chemical exposure) where Unit Bearing Number Dimensions and Load Ratings
Fafnir TDC® bearings can be utilized.
RAS G-KRRB Page 178
1
Recommended shaft tolerances: /2"-1 15/16", nominal to -.0005", -.013mm; TAS G-KPPB Page 189
2"-2 3/16", nominal to -.0010", -.025mm.
LAS G-KLLB Page 186
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: RAS 1 3/16", POPULAR SIZES ARE IN BOLD
1
Unit Shaft H H2 B1 J L A H1 N N1 d1 S1 T Bolt Bearing Collar Housing Unit
Diam. Size Number(1) Number Number Wt.
in. in. in. in. in. in. in. in. in. in. in. in. in. in. new lbs
mm mm mm mm mm mm mm mm mm mm mm mm mm mm RAS (TAS) (old) kg
1
RAS ⁄2 G1008KRRB S1008K
5 3 7 15 5 7 3 15 7 7 1 59 19 3
RAS ⁄8 1 ⁄16 2 ⁄32 1 ⁄32 3 ⁄8 4 ⁄8 1 ⁄16 ⁄32 ⁄16 ⁄8 1 ⁄8 ⁄64 ⁄32 ⁄8 G1010KRRB S1010K T-40238 1.00
11
RAS ⁄
16 30.16 56.4 37.3 92.1 123.8 30.2 11.9 11.1 22.2 28.6 23.4 15.1 10 G1011KRRB S1011K (T-30595) 0.454
RAS 17 GE17KRRB SE17K
3 5 17 23 25 1 17 7 25 5 3 5 3
RAS ⁄4 1 ⁄16 2 ⁄32 1 ⁄32 3 ⁄32 5 1 ⁄4 ⁄32 ⁄16 ⁄32 1 ⁄16 1 ⁄64 ⁄8 ⁄8 G1012KRRB S1012K T-40239 1.40
RAS 20 33.34 64.3 43.7 96 127 31.8 13.5 11.1 19.8 33.3 26.6 15.9 10 GE20KRRB SE20K (T-30555) 0.635
7
RAS,TAS ⁄8 G1014KRRB (KPPB3) S1014K
15 7 13 3 1 1 13 19 7 13 1 1 45 3
RAS,TAS ⁄16 1 ⁄16 2 ⁄16 1 ⁄4 4 ⁄8 5 ⁄2 1 ⁄32 ⁄32 ⁄16 ⁄16 1 ⁄2 1 ⁄16 ⁄64 ⁄8 G1015KRRB (KPPB3) S1015K 1.77
RAS,TAS,LAS 1 36.51 71.4 44.4 104.8 139.7 35.7 15.1 11.1 20.6 38.1 27 17.9 10 G1100KRRB (KPPB3) S1100K T-30365 0.803
RAS,TAS 25 GE25KRRB (KPPB3) SE25K
1
RAS,TAS 1 ⁄16 G1101KRRB (KPPB3) S1101K
1 11 9 29 5 3 9 21 9 15 3 3 25 1
RAS,TAS 1 ⁄8 1 ⁄16 3 ⁄32 1 ⁄32 4 ⁄8 6 ⁄16 1 ⁄16 ⁄32 ⁄16 ⁄16 1 ⁄4 1 ⁄16 ⁄32 ⁄2 G1102KRRB (KPPB3) S1102K T-40241 2.86
3
RAS,TAS, LAS 1 ⁄16 42.86 83.3 48.4 117.5 157.2 39.7 16.7 14.3 23.8 49.5 30.2 19.9 12 G1103KRRB (KPPB3) S1103K (T-30300) 1.297
RAS,TAS 30 GE30KRRB (KPPB3) SE30K
1
RAS,TAS 1 ⁄4 G1104KRRB (KPPB2) S1104K
5 7 11 1 1 9 25 23 9 31 1 9 57 1
RAS,TAS 1 ⁄16 1 ⁄8 3 ⁄16 2 ⁄64 5 ⁄8 6 ⁄16 1 ⁄32 ⁄32 ⁄16 ⁄32 2 ⁄8 1 ⁄32 ⁄64 ⁄2 G1105KRRB (KPPB2) S1105K T-40242 3.69
3
RAS,TAS 1 ⁄8 47.62 93.7 51.2 130.2 166.7 45.2 18.3 14.3 24.6 54 32.5 22.7 12 G1106KRRB (KPPB2) S1106K (T-30410) 1.674
7
RAS,TAS, LAS 1 ⁄16 G1107KRRB (KPPB2) S1107K
RAS,TAS 35 GE35KRRB (KPPB2) SE35K
15 15 7 3 1 7 3 9 1 3 3 15 1
1 ⁄16 ⁄16 2 ⁄32 5 ⁄8 7 ⁄16 1 ⁄8 ⁄4 ⁄16 1 ⁄32 2 ⁄8 1 ⁄8 ⁄16 ⁄2
1
RAS,TAS 1 ⁄2 3 G1108KRRB (KPPB3) S1108KT T-40243 4.74
9
RAS,TAS 1 ⁄16 49.21 100 56.4 136.5 179.4 47.6 19 14.3 26.2 60.3 34.9 23.8 12 G1109KRRB (KPPB3) S1109KT (T-30484) 2.150
RAS,TAS 40 GE40KRRB (KPPB3) SE40K
5
RAS,TAS 1 ⁄8 G1110KRRB (KPPB4) S1110K
1 3 7 7 17 3 9 1 1 3 1
2 ⁄8 4 ⁄16 2 ⁄32 5 ⁄8 7 ⁄32 ⁄4 ⁄16 1 ⁄8 2 ⁄2 1 ⁄8 ⁄2
11
RAS,TAS 1 ⁄16 2 1 G1111KRRB (KPPB4) S1111K T-40244 5.31
3
RAS,TAS 1 ⁄4 53.98 106.4 56.4 149.2 191.3 50.8 19 14.3 28.6 63.5 34.9 25.4 12 G1112KRRB (KPPB4) S1112K (T-30682) 2.409
RAS,TAS 45 GE45KRRB (KPPB4) SE45K
7 1 1 15 7 7 3 3 11 15 3 1 3 5
RAS,TAS 1 ⁄8 2 ⁄4 4 ⁄2 2 ⁄16 6 ⁄32 7 ⁄8 2 ⁄16 ⁄4 ⁄16 ⁄16 2 ⁄4 1 ⁄2 1 ⁄32 ⁄8 G1114KRRB (KPPB3) S1114K T-40245 6.62
15
RAS,TAS,LAS 1 ⁄16 57.15 114.3 62.7 158 200 55.6 19 17.5 23.8 69.8 38.1 27.8 16 G1115KRRB (KPPB3) S1115K (T-30706) 3.003
RAS,TAS 50 GE50KRRB (KPPB3) SE50K
207
N1
Concentric Collar H2 d1
All RASC pillow blocks are equipped with GC-KRRB (R-Seal) wide H
inner ring bearings with concentric collars.The pillow blocks are self- H1
208
Setscrew Units H2 F
H
Fafnir YAS series high base, setscrew, pillow blocks feature the new H1
GY- KRRB bearing. This full width inner ring setscrew unit is well J Min.
suited for industrial applications involving wet and dirty J S1
environments.The housing is designed for two bolt mounting in any J Max. A
position. L
E
1
Recommended shaft tolerances: ⁄2"-1 15⁄16", nominal to -.0005", -.013mm; Bearing Data
2"-2 15⁄16", nominal to -.0010", -.025mm.
Unit Bearing Number Dimensions and Load Ratings
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: YAS 1 7⁄16", POPULAR SIZES IN BOLD. 1
Unit Shaft H H2 B L J J Min J Max A H1 F S1 E Bolt Bearing
Diam. Size Number
in. in. in. in. in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm
1 3 7 5 7 5 3 1 3 15 5 7 3
YAS ⁄2 1 ⁄16 2 ⁄32 1 ⁄64 4 ⁄8 3 ⁄8 2 ⁄4 4 ⁄2 1 ⁄16 ⁄32 0.9 ⁄8 1 ⁄32 ⁄8 GY1008KRRB
5
YAS ⁄8 30.16 56.4 27.4 123.8 92.1 69.8 114.3 30.2 11.9 22.86 15.9 30.95 10 GY1010KRRB
YAS 17 GYE17KRRB
5 17 7 25 9 1 17 23 11 3
1 ⁄16 ⁄32 1 ⁄32 ⁄32 4 ⁄16 1 ⁄4 ⁄32 ⁄32 1 ⁄32 ⁄8
3
YAS ⁄4 2 5 3 3 1.085 GY1012KRRB
YAS 20 33.34 64.3 30.9 127 96 76.2 155.8 31.8 13.5 27.56 18.3 34.13 10 GYE20KRRB
7
YAS ⁄8 GY1014KRRB
15 7 13 11 1 1 5 15 13 19 25 31 3
YAS 16⁄ 1 ⁄16 2 ⁄16 1 ⁄32 5 ⁄2 4 ⁄8 3 ⁄16 4 ⁄16 1 ⁄32 ⁄32 1.332 ⁄32 1 ⁄64 ⁄8 GY1015KRRB
YAS 1 36.51 71.4 34.1 139.7 104.8 84.1 125.4 35.7 15.1 33.83 19.8 37.7 10 GY1100KRRB
YAS 25 GYE25KRRB
1
YAS 1 ⁄8 GY1102KRRB
11 9 1 3 5 11 9 9 21 7 21 1
1 ⁄16 3 ⁄32 1 ⁄2 6 ⁄16 4 ⁄8 ⁄16 5 ⁄16 1 ⁄16 ⁄32 ⁄8 1 ⁄32 ⁄2
3
YAS 1 ⁄16 3 1.587 GY1103KRRB
1
YAS 1 ⁄4S 42.86 83.3 38.1 157.2 117.5 93.7 141.3 39.7 16.7 40.31 22.2 42.07 12 GY1103KRRB3
YAS 30 GYE30KRRB
1
YAS 1 ⁄4 GY1104KRRB
3 7 11 11 9 1 5 3 25 23 57 1
YAS 1 ⁄8 1 ⁄8 3 ⁄16 1 ⁄16 6 ⁄16 5 ⁄8 4 ⁄32 6 ⁄32 1 ⁄32 ⁄32 1.816 1 1 ⁄64 ⁄2 GY1106KRRB
7
YAS 1 ⁄16 47.62 93.6 42.9 166.7 130.2 105.6 154.8 45.2 18.3 46.13 25.4 48.02 12 GY1107KRRB
YAS 35 GYE35KRRB
15 15 15 1 3 11 13 7 3 3 1 1
1 ⁄16 ⁄16 ⁄16 7 ⁄16 5 ⁄8 4 ⁄32 6 ⁄32 1 ⁄8 ⁄4 1 ⁄16 2 ⁄8 ⁄2
1
YAS 1 ⁄2 3 1 2.058 GY1108KRRB
YAS 40 49.21 100 49.2 179.4 136.5 110.3 162.7 47.6 19.1 52.27 30.2 53.98 12 GYE40KRRB
1 1 1 15 1 3 11 13 7 29 3 1 1
YAS 1 ⁄2H 2 ⁄8 4 ⁄8 1 ⁄16 7 ⁄16 5 ⁄8 4 ⁄32 6 ⁄32 1 ⁄8 ⁄32 2.058 1 ⁄16 2 ⁄8 ⁄2 GY1108KRRB
53.98 104.8 49.2 179.4 136.5 110.3 162.7 47.6 23 52.27 30.2 53.98 12
5
YAS 1 ⁄8 GY1110KRRB
1 3 15 17 7 3 3 3 3 1
2 ⁄8 4 ⁄16 ⁄16 7 ⁄32 5 ⁄8 4 ⁄4 ⁄4 1 ⁄16 2 ⁄16 ⁄2
11
YAS 1 ⁄16 1 7 2 2.28 GY1111KRRB
3
YAS 1 ⁄4 53.98 106.3 49.2 191.3 149.2 120.7 177.8 50.8 19.1 57.92 30.2 55.56 12 GY1112KRRB
YAS 45 GYE45KRRB
1 1 1 7 7 7 7 3 3 9 3 5
2 ⁄4 4 ⁄2 2 ⁄32 7 ⁄8 6 ⁄32 5 ⁄32 7 ⁄32 2 ⁄16 ⁄4 1 ⁄32 2 ⁄8 ⁄8
15
YAS 1 ⁄16 2.474 GY1115KRRB
YAS 2S 57.15 114.3 51.6 200 158 132.6 183.4 55.6 19.1 62.84 32.5 60.33 16 GY1115KRRB2
YAS 50 GYE50KRRB
1 31 3 3 15 25 3 5 13 5 7 5
YAS 2 2 ⁄2 4 ⁄32 2 ⁄16 8 ⁄4 6 ⁄16 5 ⁄32 8 ⁄32 2 ⁄16 ⁄16 2.747 1 ⁄16 2 ⁄16 ⁄8 GY1200KRRB
3
YAS 2 ⁄16 63.5 126.2 55.6 222.3 176.2 146.9 205.6 58.7 20.6 69.77 33.3 61.91 16 GY1203KRRB
YAS 55 GYE55KRRB
1 3 15 9 7 13 1 9 3 15 9 3 5
YAS 2 ⁄4 2 ⁄4 5 ⁄32 2 ⁄16 9 ⁄16 7 ⁄32 6 ⁄4 8 ⁄16 2 ⁄8 ⁄16 3.011 1 ⁄16 2 ⁄4 ⁄8 GY1204KRRB
7
YAS 2 ⁄16 69.85 138.9 65.1 239.7 188.1 158.8 217.5 60.3 23.8 76.48 39.1 69.85 16 GY1207KRRB
YAS 60 GYE60KRRB
15 1 15 1 5 1 1 3 3 3 1 3
YAS 2 ⁄16 3 ⁄4 6 ⁄32 3 ⁄16 10 ⁄8 8 ⁄2 7 ⁄4 9 ⁄4 2 ⁄4 1 3.619 1 ⁄4 3 ⁄8 ⁄4 GY1215KRRB
YAS 75 82.55 164.3 77.8 269.9 215.9 184.2 247.7 69.9 25.4 91.92 44.4 79.38 20 GYE75KRRB
15 1 1 1 1 3 1 3
YAS 2 ⁄16H 3 ⁄2 7 3 ⁄16 13 9 7 11 3 ⁄2 1 ⁄4 3.619 1 ⁄4 3 ⁄2 ⁄4 GY1215KRRB
88.9 177.8 77.8 330.2 228.6 177.8 279.4 88.9 31.75 91.92 44.4 88.9 20
209
in load carrying capacity to the VAK series but have a slightly 45°
different base to center height dimension to make them interchange- N
able with certain other competitive designs. As with the VAK series B1
H2 d1
they are prelubricated, with a grease fitting provided for relubrication
if required. H
H1
1
Recommended shaft tolerances: /2"-1 15/16", nominal to -.0005", -.013mm;
2"-2 3/16", nominal to -.0010", -.025mm. JE S1 T
F
L A
Bearing Data
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: VAS 1 3⁄16", POPULAR SIZES IN BOLD.
Unit Shaft H H2 B1 J L A H1 N N1 d1 S1 T Bolt Bearing Collar Housing Unit
Diam. Size Number Number Number Wt.
in. in. in. in. in. in. in. in. in. in. in. in. in. in. new lbs
mm mm mm mm mm mm mm mm mm mm mm mm mm mm (old) kg
1 3 7 1 5 7 3 15 7 7 1 7 19 3
VAS ⁄2 1 ⁄16 2 ⁄32 1 ⁄8 3 ⁄8 4 ⁄8 1 ⁄16 ⁄32 ⁄16 ⁄8 1 ⁄8 ⁄8 ⁄32 ⁄8 GRA008RRB S1008K T-40238 1
5
VAS ⁄8 30.16 56.4 28.6 92.1 123.8 30.2 11.9 11.1 22.2 28.6 22.2 15.1 10 GRA010RRB S1010K (T-30595) 0.454
VAS 17 GRAE17RRB SE17K
5 17 7 25 1 17 7 25 5 59 5 3
1 ⁄16 ⁄32 1 ⁄32 ⁄32 1 ⁄4 ⁄32 ⁄16 ⁄32 1 ⁄16 ⁄64 ⁄8 ⁄8
3
VAS ⁄4 2 3 5 GRA012RRB S1012K T-40239 1.24
VAS 20 33.34 64.3 31 96 127 31.8 13.5 11.1 19.8 33.3 23.4 15.9 10 GRAE20RRB SE20K (T-30555) 0.563
7
VAS 8 ⁄ GRA013RRB S1013K
15 7 13 7 1 1 13 19 7 13 1 59 45 3
VAS 16 ⁄ 1 ⁄16 2 ⁄16 1 ⁄32 4 ⁄8 5 ⁄2 1 ⁄32 ⁄32 ⁄16 ⁄16 1 ⁄2 ⁄64 ⁄64 ⁄8 GRA015RRB S1015K 1.67
VAS 1 36.51 71.4 31 104.8 139.7 35.7 15.1 11.1 20.6 38.1 23.4 17.9 10 GRA100RRB S1100K T-30365 0.758
VAS 25 GRAE25RRB SE25K
1
VAS 1 ⁄8 GRA102RRB S1102K
11 9 13 5 3 9 21 9 15 47 1 25 1
1 ⁄16 3 ⁄32 ⁄32 4 ⁄8 6 ⁄16 1 ⁄16 ⁄32 ⁄16 ⁄16 ⁄64 1 ⁄16 ⁄32 ⁄2
3
VAS 1 ⁄16 1 1 GRA103RRB S1103K T-40241 2.72
1
VAS 1 ⁄4S 42.86 83.3 35.7 117.5 157.2 39.7 16.7 14.3 23.8 44.1 27 19.9 12 GRA103RRB2 S1103K3 (T-30300) 1.235
VAS 30 GRAE30RRB SE30K
1 7 11 17 1 9 25 23 9 31 1 5 57 1
VAS 1 ⁄4 1 ⁄8 3 ⁄16 1 ⁄32 5 ⁄8 6 ⁄16 1 ⁄32 ⁄32 ⁄16 ⁄32 2 ⁄8 1 ⁄32 ⁄64 ⁄2 GRA104RRB S1104K
3
VAS 1 ⁄8 47.62 93.7 38.9 130.2 166.7 45.2 18.3 14.3 24.6 54 29.4 22.7 12 GRA106RRB S1106K T-40242 3.51
7
VAS 1 ⁄16 GRA107RRB S1107K (T-30410) 1.594
VAS 35 GRAE35RRB SE35K
15 15 23 3 1 7 3 9 1 3 9 15 1
1 ⁄16 3 ⁄16 ⁄32 5 ⁄8 7 ⁄16 1 ⁄8 ⁄4 ⁄16 1 ⁄32 2 ⁄8 1 ⁄32 ⁄16 ⁄2
1
VAS 1 ⁄2 1 GRA108RRB S1108KT T-40243 4.48
VAS 40 49.21 100.0 43.7 136.5 179.4 47.6 19.0 14.3 26.2 60.3 32.5 23.8 12 GRAE40RRB SE40K (T-30484) 2.034
5
VAS 1 ⁄8 GRA110RRB S1110K
1 3 23 7 17 3 9 1 1 9 1
2 ⁄8 4 ⁄16 ⁄32 5 ⁄8 7 ⁄32 ⁄4 ⁄16 1 ⁄8 2 ⁄2 1 ⁄32 ⁄2
11
VAS 1 ⁄16 1 2 1 GRA111RRB S1111K T-40244 4.98
3
VAS 1 ⁄4 53.98 106.4 43.7 149.2 191.3 50.8 19.0 14.3 28.6 63.5 32.5 25.4 12 GRA112RRB S1112K (T-30682) 2.261
VAS 45 GRAE45RRB SE45K
7
VAS 1 ⁄8 GRA114RRB S1114K
1 1 23 7 7 3 3 23 5 3 9 3 5
2 ⁄4 4 ⁄2 ⁄32 6 ⁄32 7 ⁄8 2 ⁄16 ⁄4 ⁄32 1 ⁄32 2 ⁄4 1 ⁄32 1 ⁄32 ⁄8
15
VAS 1 ⁄16 1 GRA115RRB S1115K T-40245 6.11
VAS 2S 57.15 114.3 43.7 158 200 55.6 19.0 18.3 29.4 69.8 32.5 27.8 16 GRA115RRB2 S1115K2 (T-30706) 2.774
VAS 50 GRAE50RRB SE50K
1 31 29 15 3 5 13 23 5 7 5 5
VAS 2 2 ⁄2 4 ⁄32 1 ⁄32 6 ⁄16 8 ⁄4 2 ⁄16 ⁄16 ⁄32 1 ⁄32 3 1 ⁄16 1 ⁄32 ⁄8 GRA200RRB S1200K T-40246 7.33
3
VAS 2 ⁄16 63.5 126.2 48.4 176.2 222.3 58.7 20.6 18.3 29.4 76.2 36.5 29.4 16 GRA203RRB S1203K (T-30738) 3.328
VAS 55 GRAE55RRB SE55K
1
Note: All units have /8 pipe thread grease fitting except 1/2-11/16 and 3/4 units which have 1/4-28 fitting.
210
This streamlined, rugged one-piece SAS pillow block unit combines 45°
N
Fafnir’s proven RAS housing and GYA-RRB setscrew bearing. The
B
GYA-RRB bearing employs a positive contact land-riding seal and H2 F
specially designed setscrews. The SAS pillow block can be
H
mounted and will operate in any position. Bearing housed units are
H1
factory prelubricated but a grease fitting is provided to allow for
relubrication if required.
A
J 2
1
Recommended shaft tolerances: /2"-1 15/16", nominal to -.0005", -.013mm; L A
2"-2 3/16", nominal to -.0010", -.025mm.
Bearing Data
Unit Bearing Number Dimensions and Load Ratings
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: SAS 1", POPULAR SIZES IN BOLD.
in. in. in. in. in. in. in. in. in. in. in. in. in. new lbs
mm mm mm mm mm mm mm mm mm mm mm mm mm (old) kg
1 3 7 5 5 7 3 15 7 7 31 15 3
SAS ⁄2 1 ⁄16 2 ⁄32 ⁄8 3 ⁄8 4 ⁄8 1 ⁄16 ⁄32 ⁄16 ⁄8 ⁄32 ⁄16 ⁄8 GYA008RRB T-40238 0.92
5
SAS ⁄8 30.16 56.4 15.9 92.1 123.8 30.2 11.9 11.1 22.2 24.6 23.8 10 GYA010RRB (T-30595) 0.42
SAS 17 GYAE17RRB
3 5 17 23 25 1 17 7 25 9 1 3
SAS ⁄4 1 ⁄16 2 ⁄32 ⁄32 3 ⁄32 5 1 ⁄4 ⁄32 ⁄16 ⁄32 1 ⁄64 1 ⁄16 ⁄8 GYA012RRB T-40239 1.25
SAS 20 33.34 64.3 18.3 96 127 31.8 13.5 11.1 19.8 29 27 10 GYAE20RRB (T-30555) 0.57
7
SAS 8 ⁄ GYA014RRB
15 7 13 49 1 1 13 19 7 13 21 7 3
SAS 16 ⁄ 1 ⁄16 2 ⁄16 ⁄64 4 ⁄8 5 ⁄2 1 ⁄32 ⁄32 ⁄16 ⁄16 1 ⁄64 1 ⁄64 ⁄8 GYA015RRB T-30365 1.67
SAS 1 36.51 71.4 19.4 104.8 139.7 35.7 15.1 11.1 20.6 33.7 28.2 10 GYA100RRB 0.75
SAS 25 GYAE25RRB
1
SAS 1 ⁄8 GYA102RRB
11 9 29 5 3 9 21 9 15 37 9 1
1 ⁄16 3 ⁄32 ⁄32 4 ⁄8 6 ⁄16 1 ⁄16 ⁄32 ⁄16 ⁄16 1 ⁄64 1 ⁄32 ⁄2
3
SAS 1 ⁄16 GYA103RRB T-40241 2.52
1
SAS 1 ⁄4S 42.86 83.3 23 117.5 157.2 39.7 16.7 14.3 23.8 40.1 32.5 12 GYA103RRB2 (T-30300) 1.14
SAS 30 GYAE30RRB
1
SAS 1 ⁄4 GYA104RRB
3 7 11 1 1 9 25 23 9 31 27 7 1
SAS 1 ⁄8 1 ⁄8 3 ⁄16 1 ⁄64 5 ⁄8 6 ⁄16 1 ⁄32 ⁄32 ⁄16 ⁄32 1 ⁄32 1 ⁄16 ⁄2 GYA106RRB T-40242 3.35
7
SAS 1 ⁄16 47.62 93.6 25.8 130.2 166.7 45.2 18.3 14.3 24.6 46.8 36.5 12 GYA107RRB (T-30410) 1.52
SAS 35 GYAE35RRB
15 15 3 3 1 7 3 9 1 1 35 1
1 ⁄16 ⁄16 1 ⁄32 5 ⁄8 7 ⁄16 1 ⁄8 ⁄4 ⁄16 1 ⁄32 2 ⁄16 1 ⁄64 ⁄2
1
SAS 1 ⁄2 3 GYA108RRB T-40243 4.08
SAS 40 49.21 100 27.8 136.5 179.4 47.6 19 14.3 26.2 52.4 39.3 12 GYAE40RRB (T-30484) 1.85
1 15 3 3 1 7 3 9 1 1 35 1
2 ⁄8 ⁄16 1 ⁄32 5 ⁄8 7 ⁄16 1 ⁄8 ⁄4 ⁄16 1 ⁄32 2 ⁄16 1 ⁄64 ⁄2
1
SAS 1 ⁄2 H 3 GYA108RRB T-39528 4.08
53.90 100 27.8 136.5 179.4 47.6 19 14.3 26.2 52.4 39.3 12 1.85
5
SAS 1 ⁄8 GYA110RRB
1 3 1 7 17 3 9 1 9 21 1
2 ⁄8 4 ⁄16 1 ⁄8 5 ⁄8 7 ⁄32 ⁄4 ⁄16 1 ⁄8 2 ⁄32 1 ⁄32 ⁄2
11
SAS 1 ⁄16 2 GYA111RRB T-40244 4.55
3
SAS 1 ⁄4 53.9 106.3 28.6 149.2 191.3 51.0 19 14.3 28.6 57.9 42.1 12 GYA112RRB (T-30682) 2.06
SAS 45 GYAE45RRB
1 1 7 7 7 3 3 11 15 15 3 5
2 ⁄4 4 ⁄2 1 ⁄32 6 ⁄32 7 ⁄8 2 ⁄16 ⁄4 ⁄16 ⁄16 2 ⁄32 1 ⁄4 ⁄8
15
SAS 1 ⁄16 GYA115RRB T-40245 5.6
SAS 2S 57.2 114.3 30.9 158 200 55.6 19 17.5 23.8 62.7 44.4 16 GYA115RRB2 (T-30706) 2.54
SAS 50 GYAE50RRB
1 31 1 15 3 5 13 23 5 3 53 5
SAS 2 2 ⁄2 4 ⁄32 1 ⁄4 6 ⁄16 8 ⁄4 2 ⁄16 ⁄16 ⁄32 1 ⁄32 2 ⁄4 1 ⁄64 ⁄8 GYA200RRB T-40246 6.66
3
SAS 2 ⁄16 63.5 126.2 31.7 176.2 222.3 58.7 20.6 18.3 29.4 69.8 46.4 16 GYA203RRB (T-30738) 3.02
SAS 55 GYAE55RRB
1
Note: All units have /8 pipe thread grease fitting except 1/2-11/16 and 3/4 units which have 1/4-28 fitting.
211
Fafnir RAKH pillow blocks are similar in design to other series pillow blocks but d1
S1
N H2
have slightly different dimensions to allow interchangeability with certain
competitive designs. They may be used independently or in conjunction with H
RAKHL expansion units shown below. Used in this capacity, the RAKH pillow H1
FAFNIR
blocks provide fixed shaft location while the RAKHL and expansion units
allows for axial movement. J
A
2
The maximum operating temperature for the RAKH units is 250° F (121°C). L A
Units are supplied with self-locking collars.
Bearing Data
13
Recommended shaft tolerances: ⁄16"-1 15⁄16", nominal to -.0005", -.013mm; Unit Bearing Number Dimensions and Load Ratings
2"-2 15⁄16", nominal to -.0010", -.025mm.
RAKH G-KRRB Page 178
(1)
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: RAKH 1 7⁄16"
(2)
Unit Shaft H H2 B1 J L A H1 N N1 d1 S1 Bolt Bearing Collar Housing Unit
Diam. Size Number Number Number Wt.
in. in. in. in. in. in. in. in. in. in. in. in. in. new lbs
mm mm mm mm mm mm mm mm mm mm mm mm mm kg
3 1 3 11 1 5 9 1 1 3
RAKH 1 1 ⁄4 3 ⁄4 1 ⁄4 4 ⁄16 6 ⁄4 2 ⁄8 ⁄16 1 1 ⁄2 1 ⁄16 ⁄8 G1100KRRB S1100K T-22295 3.72
44.45 82.6 44.4 119.1 158.8 50.8 15.9 14.3 25.4 38.1 27 9.5 1.689
3 7 9 29 7 1 11 9 47 3 1
RAKH 1 ⁄16 1 ⁄8 3 ⁄16 1 ⁄32 5 6 ⁄8 2 ⁄4 ⁄16 ⁄16 1 1 ⁄64 1 ⁄16 ⁄2 G1103KRRB S1103K T-22216 4.81
47.63 90.5 48.4 127 174.6 57.2 17.5 14.3 25.4 44.1 30.2 12.7 2.184
1 1 1 11 1 3 9 3 1 9 1
RAKH 1 ⁄4 2 ⁄8 4 2 ⁄64 5 ⁄16 8 2 ⁄4 ⁄4 ⁄16 1 ⁄16 2 ⁄8 1 ⁄32 ⁄2 G1104KRRB S1104K T-22212 6.42
7
RAKH 1 ⁄16 53.98 101.6 51.2 144.5 203.2 57.2 19 14.3 30.2 54 32.5 12.7 G1107KRRB S1107K 2.915
1 5 3 7 1 3 5 13 11 1 3 3 1
RAKH 1 ⁄2 2 ⁄16 4 ⁄8 2 ⁄32 6 ⁄8 8 ⁄4 2 ⁄8 ⁄16 ⁄16 1 ⁄4 2 ⁄8 1 ⁄8 ⁄2 G1108KRRB S1108KT 8.82
58.74 111.1 56.4 155.6 222.2 66.7 20.6 17.5 31.8 60.3 34.9 12.7 T-22291 4.004
11 5 1 7 1 3 5 13 11 5 1 3 1
RAKH 1 ⁄16 2 ⁄16 4 ⁄2 2 ⁄32 6 ⁄8 8 ⁄4 2 ⁄8 ⁄16 ⁄16 1 ⁄16 2 ⁄2 1 ⁄8 ⁄2 G1111KRRB S1111K T-22293 8.88
3
RAKH 1 ⁄4 58.74 114.3 56.4 155.6 222.2 66.7 20.6 17.5 33.3 63.5 34.9 12.7 G1112KRRB S1112K 4.032
15 1 13 15 3 1 7 7 11 7 3 1 1
RAKH 1 ⁄16 2 ⁄2 4 ⁄16 2 ⁄32 6 ⁄4 9 ⁄2 2 ⁄8 ⁄8 ⁄16 1 ⁄16 2 ⁄4 1 ⁄2 ⁄2 G1115KRRB S1115K T-22214 11.23
63.5 122.2 62.7 171.4 241.3 73 22.2 17.5 36.5 69.8 38.1 12.7 5.098
3 3 3 13 1 1 1 1 13 7 23 5
RAKH, 2 ⁄16 2 ⁄4 5 ⁄8 2 ⁄16 7 ⁄4 10 ⁄4 3 ⁄8 1 ⁄16 ⁄16 1 ⁄16 3 1 ⁄32 ⁄8 G1203KRRB S1203K T-22297 14.82
RAKH 55 69.85 136.5 71.4 184.2 260.4 79.4 27 20.6 36.5 76.2 43.7 15.9 GE55KRRB SE55K 6.728
7 15 1 1 1 1 13 5 5 27 5
RAKH 2 ⁄16 3 5 ⁄16 3 ⁄16 8 11 ⁄4 3 ⁄4 1 ⁄16 ⁄16 1 ⁄8 3 ⁄16 1 ⁄32 ⁄8 G1207KRRB S1207K
76.2 150.8 77.8 203.2 285.8 82.6 27 20.6 41.3 84.1 46.8 15.9 T-22299 8.217
11 1 3 3 1 1 15 13 25 3
RAKH 2 ⁄16 3 ⁄2 6 ⁄4 3 ⁄8 9 13 3 ⁄2 1 ⁄8 ⁄16 2 3 ⁄16 1 ⁄32 ⁄4 G1211KRRB S1211K T-22303 25.32
88.9 171.4 85.7 228.6 330.2 88.9 28.6 23.8 50.8 96.8 45.2 19 11.495
15 1 5 1 1 15 5 3
RAKH, 2 ⁄16 3 ⁄2 7 3 ⁄8 9 13 3 ⁄2 1 ⁄4 ⁄16 2 4 2 ⁄32 ⁄4 G1215KRRB S1215K 25.98
88.9 177.8 92.1 228.6 330.2 88.9 31.8 23.8 50.8 101.6 54.8 19 T-22305 11.795
(1)
When used with the expansion unit, specify both units, shaft diameters and suffix.
G MAX.
S1 K MAX.
Fafnir RAKHL pillow blocks are designed to allow axial shaft expansion due to M MIN.
elevated temperatures or other conditions causing shaft movement. These H2
d1 HOUSING
BORE
units are designed for use with the Fafnir RAKH FS-160 pillow blocks, the H
RAKH units providing axial shaft location and the RAKHL allowing shaft FAFNIR H1
floatation. Due to limitations of the lubricant and seal material, the maximum
operating temperature for the RAKHL units is 250°F (121°C). Units are J A
supplied with self-locking collars. Steel “S” ring assures axial expansion. L
2
A
13 Bearing Data
Recommended shaft tolerances: ⁄16"-1 15⁄16", nominal to -.0005", -.013mm;
2"-2 15⁄16", nominal to -.0010", -.025mm. Unit Bearing Number Dimensions and Load Ratings
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. new lbs
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm kg
3 1 7 13 15 7 11 9 3 3 3 41 1
RAKHL 1 ⁄16 ⁄8 1 ⁄8 3 ⁄16 1 ⁄16 5 6 ⁄8 2 ⁄16 ⁄16 1 ⁄32 1 ⁄4 1 ⁄16 1 ⁄64 ⁄2 1103KRS S1103K A11414 4.81
3.2 47.63 96.8 49.2 127 174.6 50.8 17.5 14.3 25.4 2.4 44.5 30.2 41.7 12.7 2.182
3 1 3 11 11 15 1 3 9 3 1 1 9 57 1
7
⁄16 2 ⁄8 4 ⁄16 2 ⁄64 5 ⁄16 7 ⁄16 2 ⁄32 ⁄4 ⁄16 1 ⁄16 ⁄8 2 ⁄8 1 ⁄32 1 ⁄64 ⁄2 1106KRS S1106K A11199 6.42
RAKHL 1 ⁄16 4.8 53.98 106.4 55.2 144.5 201.6 51.6 19 14.3 30.2 3.2 54 32.5 48.02 12.7 1107KRS S1107K 2.912
15 1 1 3 9 3 1 1 7 11 7 5 3 1 33 1
RAKHL 1 ⁄16 ⁄4 2 ⁄2 5 ⁄32 2 ⁄16 6 ⁄4 9 ⁄2 2 ⁄2 ⁄8 ⁄16 1 ⁄16 ⁄32 2 ⁄4 1 ⁄2 2 ⁄64 ⁄2 1115KRS S1115K A11357 11.23
6.4 63.5 129.4 65.1 171.4 241.3 63.5 22.2 17.5 36.5 4 69.8 38.1 63.9 12.7 5.094
3 1 3 5 57 1 1 1 13 7 11 23 51 5
RAKHL 2 ⁄16 ⁄4 2 ⁄4 5 ⁄8 2 ⁄64 7 ⁄4 10 ⁄4 3 1 ⁄16 ⁄16 1 ⁄16 ⁄64 3 1 ⁄32 2 ⁄64 ⁄8 1203KRS S1203K A11358 14.82
6.4 69.85 142.9 73.4 184.2 260.4 76.2 27 20.6 36.5 4.4 76.2 43.7 71 15.9 6.722
7 1 1 3 1 1 1 13 5 3 5 27 5 5
2 ⁄16 ⁄4 6 ⁄4 3 ⁄32 11 ⁄4 3 ⁄4 1 ⁄16 ⁄16 1 ⁄8 ⁄16 3 ⁄16 1 ⁄32 3 ⁄64 ⁄8
(1)
RAKHL 3 8 1207KRS S1207K — 18.1
6.4 76.2 158.8 78.6 203.2 285.8 82.6 27 20.6 41.3 4.8 84.1 46.8 78.2 15.9 8.210
15 1 1 1 15 1 1 15 11 5 43 3
RAKHL 2 ⁄16 ⁄4 3 ⁄2 7 ⁄4 3 ⁄32 9 13 3 ⁄2 1 ⁄4 ⁄16 2 ⁄32 4 2 ⁄32 3 ⁄64 ⁄4 1215KRS S1215K T-28261 25.98
6.4 88.9 181 113.5 228.6 330.2 88.9 31.8 23.8 50.8 8.7 101.6 54.8 118.7 19 11.785
(1)
Special Order.
212
The durable, cast iron housings are powder paint coated, and maintain an H1
excellent finish while resisting corrosion, chemical and weather exposure. J Min.
Fafnir’s industrial-duty pillow blocks incorporate premium features designed to J S1
extend bearing life and will replace competitive designs. J Max. A
E
L
Bearing Data
Unit Bearing Number Dimensions
YASM GYM-KRRB Page 192
in. in. in. in. in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm mm mm mm
11 9 1 3 5 11 9 9 21 7 21 1
YASM 1 1 ⁄16 3 ⁄32 1 ⁄2 6 ⁄16 4 ⁄8 3 ⁄16 5 ⁄16 1 ⁄16 ⁄32 1.587 ⁄8 1 ⁄32 ⁄2 GYM1100KRRB
42.86 83.3 38.1 157.2 117.5 93.7 141.3 39.7 16.7 40.31 22.2 42.07 12
3 7 11 11 9 1 5 3 25 23 57 1
YASM 1 ⁄16 1 ⁄8 3 ⁄16 1 ⁄16 6 ⁄16 5 ⁄8 4 ⁄32 6 ⁄32 1 ⁄32 ⁄32 1.844 1 1 ⁄64 ⁄2 GYM1103KRRB
47.62 93.6 42.9 166.7 130.2 105.6 154.8 45.2 18.3 48.84 25.4 48.02 12
7 1 1 15 1 3 11 13 7 29 3 1 1
YASM 1 ⁄16 2 ⁄8 4 ⁄8 1 ⁄16 7 ⁄16 5 ⁄8 4 ⁄32 6 ⁄16 1 ⁄8 ⁄32 2.058 1 ⁄16 2 ⁄8 ⁄2 GYM1107KRRB
53.98 104.8 49.2 179.4 136.5 110.3 162.7 47.6 23 52.27 30.2 53.98 12
1 1 3 15 17 7 3 3 3 3 1
YASM 1 ⁄2 2 ⁄8 4 ⁄16 1 ⁄16 7 ⁄32 5 ⁄8 4 ⁄4 7 2 ⁄4 2.28 1 ⁄16 2 ⁄16 ⁄2 GYM1108KRRB
53.98 106.3 49.2 191.3 149.2 120.7 177.8 50.8 19.1 57.92 30.2 55.56 12
11 1 1 1 7 7 9 5 3 3 9 3 5
YASM 1 ⁄16 2 ⁄4 4 ⁄2 2 ⁄32 7 ⁄8 6 ⁄32 5 ⁄32 7 ⁄32 2 ⁄16 ⁄4 2.474 1 ⁄32 2 ⁄8 ⁄8 GYM1111KRRB
3
YASM 1 ⁄4 57.15 114.3 51.6 200 157.9 134.1 183.4 55.6 19.1 62.84 32.5 60.33 16 GYM1112KRRB
15 1 31 3 3 15 25 3 5 13 5 7 5
YASM 1 ⁄16 2 ⁄2 4 ⁄32 2 ⁄16 8 ⁄4 6 ⁄16 5 ⁄32 8 ⁄32 2 ⁄32 ⁄16 2.747 1 ⁄16 2 ⁄16 ⁄8 GYM1115KRRB
YASM 2 63.5 126.2 55.6 222.3 176.2 146.9 205.6 54.8 20.6 69.77 33.3 61.91 16 GYM1200KRRB
3 3 15 9 7 13 1 9 3 15 9 3 5
YASM 2 ⁄16 2 ⁄4 5 ⁄32 2 ⁄16 9 ⁄16 7 ⁄32 6 ⁄4 8 ⁄16 2 ⁄8 ⁄16 3.011 1 ⁄16 2 ⁄4 ⁄8 GYM1203KRRB
1
YASM 2 ⁄4 69.85 138.9 65.1 239.7 188.1 158.8 217.5 60.3 23.8 76.48 39.1 69.85 16 GYM1204KRRB
7 1 1 1 5 3 7 5 11 1 3
YASM 2 ⁄16 3 6 ⁄16 3 ⁄16 10 ⁄2 8 6 ⁄8 9 ⁄8 2 ⁄8 1 ⁄16 3.422 1 ⁄16 3 ⁄8 ⁄4 GYM1207KRRB
1
YASM 2 ⁄2 76.2 153.99 77.78 266.7 203.2 168.28 238.13 73.02 33.34 86.92 42.86 79.375 20 GYM1208KRRB
11 1 11 1 1 3 11 3
YASM 2 ⁄16 3 ⁄2 7 3 ⁄16 13 9 7 11 3 ⁄2 1 ⁄4 3.618 1 ⁄4 3 ⁄16 ⁄4 GYM1211KRRB
88.9 177.8 93.66 330.2 228.6 177.8 279.4 88.90 31.75 91.90 44.45 93.66 20
15 1 11 1 1 3 11 3
YASM 2 ⁄16 3 ⁄2 7 3 ⁄16 13 9 7 11 3 ⁄2 1 ⁄4 3.618 1 ⁄4 3 ⁄16 ⁄4 GYM1215KRRB
YASM 3 88.9 177.8 93.66 330.2 228.6 177.8 279.4 88.90 31.75 91.90 44.45 93.66 20 GYM1300KRRB
213
The Fafnir VTB series two bolt housed units are identical to the STB unit except the units are
A
assembled with GRA-RRB bearings with positive contact “R” seals , and locking collar. These
units are factory prelubricated, but a grease fitting is provided for relubrication if required.
Bearing Data B
C L
214
Bearing Data
7
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: RAO 1 ⁄16"
(1)
Unit Shaft H H2 B1 L1 J L A H1 N N1 d1 S1 T Bolt Bearing Collar Housing Unit
Diam. Size Number Number Number Wt.
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs
mm mm mm mm mm mm mm mm mm mm mm mm mm mm kg
3 7 11 31 9 3 13 15 7 5 3 15 9 31 1
RAO 1 ⁄16 1 ⁄8 3 ⁄16 1 ⁄32 3 ⁄16 5 ⁄8 6 ⁄16 1 ⁄16 ⁄8 ⁄8 ⁄4 1 ⁄16 1 ⁄32 ⁄32 ⁄2 GN103KRRB SN103K T-18798 4.18
47.63 93.7 50 90.5 136.5 173 49.2 22.2 15.9 19 49.2 32.5 24.6 12.7 1.898
7 1 3 1 9 1 15 5 3 3 5 1 1
RAO 1 ⁄16 2 ⁄8 4 ⁄32 2 ⁄32 4 6 7 ⁄16 2 ⁄8 ⁄16 ⁄8 ⁄4 2 ⁄16 1 ⁄16 1 ⁄16 ⁄2 GN107KRRB SN107K T-18626 5.30
53.98 104 51.6 101.6 152.4 192.1 54 23.8 15.9 19 55.6 33.3 27 12.7 2.406
1 3 5 1 1 3 1 3 1 3 1 15 3 5
RAO 1 ⁄2 2 ⁄8 4 ⁄8 2 ⁄4 4 ⁄2 6 ⁄4 8 ⁄2 2 ⁄8 1 ⁄16 ⁄4 1 2 ⁄2 1 ⁄32 1 ⁄16 ⁄8 GN108KRRB SN108K T-18800 8.27
60.33 117.5 57.2 114.3 171.4 215.9 60.3 27 19 25.4 63.5 37.3 30.2 15.9 3.755
11 5 1 5 1 7 5 3 3 3 17 5 5
RAO 1 ⁄16 2 ⁄8 5 ⁄8 2 ⁄16 5 7 ⁄2 9 ⁄16 2 ⁄8 1 ⁄16 ⁄4 1 2 ⁄4 1 ⁄32 1 ⁄16 ⁄8 GN111KRRB SN111K T-18802 11.08
66.68 130.2 58.7 127 190.5 239.7 66.7 30.2 19 25.4 69.8 38.9 33.3 15.9 5.03
15 13 9 5 7 1 7 7 5 3 21 7 5
RAO 1 ⁄16 2 ⁄16 5 ⁄16 2 ⁄8 5 ⁄16 8 ⁄4 10 ⁄16 2 ⁄8 1 ⁄16 ⁄4 1 3 1 ⁄32 1 ⁄16 ⁄8 GN115KRRB SN115K T-18804 13.80
71.44 141.3 66.7 138.1 209.6 265.1 73 33.3 19 25.4 76.2 42.1 36.5 15.9 6.265
3 1 1 7 15 5 1 7 7 1 1 25 9 3
RAO 2 ⁄16 3 ⁄16 6 ⁄32 2 ⁄8 5 ⁄16 9 11 ⁄16 3 ⁄8 1 ⁄16 ⁄8 1 ⁄8 3 ⁄4 1 ⁄32 1 ⁄16 ⁄4 GN203KRRB SN203K T-18806 17.49
77.79 153.2 73 150.8 228.6 287.3 79.4 36.5 22.2 28.6 82.6 45.2 39.7 19 7.94
7 5 17 1 7 3 5 5 1 7 1 1 29 21 3
RAO 2 ⁄16 3 ⁄16 6 ⁄32 3 ⁄8 6 ⁄16 9 ⁄4 12 ⁄16 3 ⁄16 1 ⁄2 ⁄8 1 ⁄8 3 ⁄2 1 ⁄32 1 ⁄32 ⁄4 GN207KRRB SN207K T-18808 21.50
84.14 165.9 79.4 163.5 247.6 312.7 84.1 38.1 22.2 28.6 88.9 48.4 42.1 19 9.761
11 13 9 1 7 1 3 13 3 5 5 29 7
RAO 2 ⁄16 3 ⁄16 7 ⁄16 3 ⁄2 7 ⁄16 11 ⁄4 14 ⁄16 3 ⁄16 1 ⁄4 1 1 ⁄16 4 2 ⁄32 1 ⁄32 ⁄8 GN211KRRB SO211K T-18810 33.75
96.84 192.1 88.9 188.9 285.8 360.4 96 44.4 25.4 33.3 101.6 54.8 48.4 22.2 15.322
15 1 1 15 15 1 1 7 5 7 15 1 7
RAO 2 ⁄16 4 ⁄8 8 ⁄16 3 ⁄16 7 ⁄16 12 15 ⁄8 4 ⁄16 1 ⁄8 1 1 ⁄16 4 ⁄16 2 ⁄32 2 ⁄32 ⁄8 GN215KRRB SN215K T-18601 40.10
104.78 204.8 100 201.6 304.8 384.2 103.2 47.6 25.4 33.3 112.7 62.7 51.6 22.2 18.205
(1)
LAO assembled with GN-KLLB bearing.
215
Fafnir RSA and LSA type pillow blocks are equipped with G-KRRB S1
wide inner ring ball bearings, and the LSA series is equipped with
G-KLLB wide inner ring bearings. 45°
N1
These pillow blocks are prelubricated and ready for immediate
use. A grease fitting is provided for relubrication if required. All units
N H2 d1
are supplied with a self locking collar.
1
Recommended shaft tolerances: ⁄2"-1 15⁄16", nominal to -.0005", -.013mm; H
2"-2 15⁄16", nominal to -.0010", -.025mm. H1
Bearing Data
FAFNIR
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: RSA 1 7⁄16", POPULAR SIZES IN BOLD
in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs
mm mm mm mm mm mm mm mm mm mm mm mm mm mm kg
1
RSA ⁄2 G1008KRRB S1008K
5 1 5 15 1 13 13 1 1 7 9 3 59 3
RSA ⁄8 1 ⁄4 2 ⁄16 1 ⁄32 2 ⁄8 3 ⁄16 4 ⁄16 1 ⁄4 ⁄2 ⁄16 ⁄16 1 ⁄16 ⁄64 ⁄8 G1010KRRB S1010K T-22784 1.50
11
RSA ⁄16 31.75 58.7 37.3 54 96.8 122.2 31.8 12.7 11.1 14.3 30.2 23.4 9.5 G1011KRRB S1011K 0.681
RSA 17 GE17KRRB SE17K
3 3 23 1 1 9 9 3 5 3 1
RSA ⁄4 1 ⁄4 3 1 ⁄32 2 ⁄2 5 6 ⁄2 2 ⁄16 ⁄16 ⁄4 1 ⁄16 1 ⁄64 ⁄2 G1012KRRB S1012K T-22741 2.70
RSA 20 44.45 76.2 43.7 63.5 127.0 165.1 50.8 14.3 14.3 19 33.3 26.6 12.7 GE20KRRB SE20K 1.226
7
RSA 8 ⁄ G1014KRRB S1014K
15 3 3 3 1 1 5 9 3 1 1 1
RSA 16 ⁄ 2 3 ⁄8 1 ⁄4 2 ⁄4 5 ⁄2 7 2 ⁄8 ⁄8 ⁄16 ⁄4 1 ⁄2 1 ⁄16 ⁄2 G1015KRRB S1015K T-22716 3.35
RSA 1 50.80 85.7 44.4 69.8 139.7 177.8 54 15.9 14.3 19 38.1 27 12.7 G1100KRRB S1100K 1.521
RSA 25 GE25KRRB SE25K
1
RSA 1 ⁄16 G1101KRRB S1101K
1 19 29 3 1 1 11 5 13 47 3 1
RSA 1 ⁄8 2 3 ⁄32 1 ⁄32 3 ⁄16 5 ⁄2 7 2 ⁄8 ⁄16 ⁄8 ⁄16 1 ⁄64 1 ⁄16 ⁄2 G1102KRRB S1102K T-22725 3.94
3
RSA,LSA 1 ⁄16 50.80 91.3 48.4 81 139.7 177.8 54 17.5 15.9 20.6 44.1 30.2 12.7 G1103KRRB S1103K 1.789
RSA 30 GE30KRRB SE30K
1
RSA,LSA 1 ⁄4 G1104KRRB S1104K
5 3 3 1 1 1 5 7 3 1 1 9 5
RSA 1 ⁄16 2 ⁄8 4 ⁄8 2 ⁄64 4 6 ⁄4 8 ⁄4 2 ⁄8 ⁄8 ⁄4 1 ⁄4 2 ⁄8 1 ⁄32 ⁄8 G1105KRRB S1105K T-22382 7.18
3
RSA 1 ⁄8 60.33 111.1 51.2 101.6 158.8 209.6 66.7 22.2 19 31.8 54 32.5 15.9 G1106KRRB S1106K 3.260
7
RSA,LSA 1 ⁄16 G1107KRRB S1107K
RSA 35 GE35KRRB SE35K
1 3 3 7 5 1 3 3 3 7 3 3 5
RSA 1 ⁄2 2 ⁄8 4 ⁄8 2 ⁄32 4 6 ⁄8 8 ⁄4 2 ⁄8 ⁄4 ⁄4 ⁄8 2 ⁄8 1 ⁄8 ⁄8 G1108KRRB S1108KT T-22752 6.45
9
RSA 1 ⁄16 60.33 111.1 56.4 101.6 168.3 209.6 60.3 19 19 22.2 60.3 34.9 15.9 G1109KRRB S1109KT 2.928
RSA 40 GE40KRRB SE40K
5
RSA 1 ⁄8 G1110KRRB S1110K
11 3 1 7 1 5 1 3 13 3 15 1 3 5
RSA,LSA 1 ⁄16 2 ⁄8 4 ⁄2 2 ⁄32 4 ⁄4 6 ⁄8 8 ⁄4 2 ⁄8 ⁄16 ⁄4 ⁄16 2 ⁄2 1 ⁄8 ⁄8 G1111KRRB S1111K T-22701 6.75
3
RSA 1 ⁄4 60.33 114.3 56.4 108 168.3 209.6 60.3 20.6 19 23.8 63.5 34.9 15.9 G1112KRRB S1112K 3.064
RSA 45 GE45KRRB SE45K
7 3 1 15 3 1 5 3 1 3 3 3 1 5
RSA 1 ⁄8 2 ⁄4 5 ⁄8 2 ⁄32 4 ⁄4 8 ⁄4 10 ⁄8 2 ⁄4 1 ⁄32 ⁄4 1 ⁄8 2 ⁄4 1 ⁄2 ⁄8 G1114KRRB S1114K T-22384 10.76
15
RSA,LSA 1 ⁄16 69.85 130.2 62.7 120.6 209.6 269.9 69.8 26.2 19 34.9 69.8 38.1 15.9 G1115KRRB S1115K 4.885
RSA 50 GE50KRRB SE50K
216
1
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: RSAO 1 7⁄16"
in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs
mm mm mm mm mm mm mm mm mm mm mm mm mm kg
3 3 1 31 3 5 1 3 7 5 1
RSAO,LSAO 1 ⁄16 2 ⁄8 4 ⁄4 1 ⁄32 3 ⁄4 6 ⁄8 8 ⁄4 2 ⁄8 ⁄8 ⁄8 1 1.918 1.280 ⁄2 GN103KRRB SN103K T-22678 6.47
60.33 108 50 95.2 168.3 209.6 60.3 22.2 15.9 25.4 48.7 32.5 12.7 2.937
7 3 13 1 1 1 5 3 15 3 1 5 5
RSAO,LSAO 1 ⁄16 2 ⁄4 4 ⁄16 2 ⁄32 4 ⁄8 8 ⁄4 10 ⁄8 2 ⁄4 ⁄16 ⁄4 1 ⁄8 2.168 1 ⁄16 ⁄8 GN107KRRB SN107K T-22496 9.15
69.85 122.2 51.6 104.8 209.6 269.9 69.8 23.8 19 28.6 55.1 33.3 15.9 4.154
1 1 3 1 1 3 1 1 3 1 15 5
RSAO,LSAO 1 ⁄2 3 ⁄8 5 ⁄8 2 ⁄4 4 ⁄2 9 11 ⁄8 3 ⁄8 1 ⁄16 ⁄4 1 ⁄8 2.480 1 ⁄32 ⁄8 GN108KRRB SN108K T-22672 12.90
79.38 136.6 57.2 114.3 228.6 288.9 79.4 27 19 28.6 63.0 37.3 15.9 5.857
11 1 5 5 3 1 3 3 1 17 5
RSAO,LSAO 1 ⁄16 3 ⁄8 5 ⁄8 2 ⁄16 5 9 11 ⁄8 3 ⁄8 1 ⁄16 ⁄4 1 ⁄8 2.730 1 ⁄32 ⁄8 GN111KRRB SN111K T-22498 14.45
3
RSAO 1 ⁄4 79.38 142.9 58.7 127 228.6 288.9 79.4 30.2 19 28.6 69.3 38.9 15.9 GN112KRRB SN112K 6.56
15 1 27 5 7 3 1 5 3 1 21 5
RSAO,LSAO 1 ⁄16 3 ⁄8 5 ⁄32 2 ⁄8 5 ⁄16 9 11 ⁄8 3 ⁄8 1 ⁄16 ⁄4 1 ⁄8 2.980 1 ⁄32 ⁄8 GN115KRRB SN115K T-22502 15.96
79.38 148.4 66.7 138.1 228.6 288.9 79.4 33.3 19 28.6 75.7 42.1 15.9 7.246
3 23 7 15 1 5 1 7 7 3 25 3
RSAO 2 3 ⁄4 6 ⁄32 2 ⁄8 5 ⁄16 10 ⁄4 12 ⁄8 3 ⁄2 1 ⁄16 ⁄8 1 ⁄8 3.230 1 ⁄32 ⁄4 GN200KRRB SN200K T-22500 22.45
3
RSAO,LSAO 2 ⁄16 95.25 170.7 73 150.8 260.4 320.7 88.9 36.5 22.2 34.9 82.0 45.2 19 GN203KRRB SN203K 10.192
7 1 11 1 7 1 3 1 7 3 29 3
RSAO,LSAO 2 ⁄16 4 ⁄8 7 ⁄32 3 ⁄8 6 ⁄16 11 ⁄4 13 ⁄4 4 1 ⁄2 ⁄8 1 ⁄8 3.480 1 ⁄32 ⁄4 GN207KRRB SN207K T-22494 35.56
104.78 186.5 79.4 163.5 285.8 349.2 101.6 38.1 22.2 34.9 88.4 48.4 19 16.144
11 9 9 1 7 3 3 3 3 5 7
RSAO,LSAO 2 ⁄16 4 ⁄16 8 ⁄32 3 ⁄2 7 ⁄16 12 15 ⁄8 4 ⁄8 1 ⁄4 1 1 ⁄8 3.980 2 ⁄32 ⁄8 GN211KRRB SO211K T-22492 42.50
115.89 210.3 88.9 188.9 304.8 390.5 111.1 44.4 25.4 34.9 101.1 54.8 22.2 19.295
15 9 9 15 3 3 3 7 3 15 7
RSAO,LSAO 2 ⁄16 4 ⁄16 8 ⁄16 3 ⁄16 8 12 ⁄8 15 ⁄8 4 ⁄8 1 ⁄8 1 1 ⁄8 4.418 2 ⁄32 ⁄8 GN215KRRB SN215K T-22490 44.25
115.89 217.5 100 203.2 314.3 390.5 111.1 47.6 25.4 34.9 112.2 62.7 22.2 20.09
3 9 25 3 7 3 3 3 15 3 19 7
RSAO 3 ⁄16 4 ⁄16 8 ⁄32 4 ⁄16 8 ⁄16 12 ⁄8 15 ⁄8 4 ⁄8 1 ⁄16 1 1 ⁄4 4.688 2 ⁄32 ⁄8 GN303KRRB SN303K T-22444 50.25
115.89 223 106.4 214.3 314.3 390.5 111.1 49.2 25.4 44.4 119.1 65.9 22.2 22.814
7 1 7 9 1 3 1 3 1 1 1 29
RSAO 3 ⁄16 5 ⁄8 9 ⁄8 4 ⁄16 9 ⁄2 13 ⁄8 16 ⁄8 4 ⁄4 2 ⁄4 1 ⁄8 2 ⁄8 5.250 2 ⁄32 1 GN307KRRB SN307K T-22446 68.25
130.18 250.8 115.9 241.3 339.7 409.6 120.6 57.2 28.6 54 133.4 73.8 25.4 30.986
15 11 1 1 3 3 5 1 9 1 3 3
RSAO 3 ⁄16 5 ⁄16 11 ⁄16 5 ⁄16 10 ⁄4 14 ⁄4 17 ⁄16 5 ⁄8 2 ⁄16 1 ⁄8 1 ⁄4 5.750 3 ⁄32 1 GN315KRRB SN315K T-22448 89.50
144.46 281 128.6 273 374.6 439.7 130.2 65.1 28.6 44.4 146 78.6 25.4 40.633
217
TO ORDER, SPECIFY UNIT, SHAFT DIAMETER, AND WHETHER FIXED OR FLOATING. Example: SAL 1 7⁄16"(one fixed, one floating).
Unit Shaft Total H O L1 A J L N N1 H1 A1 T Bolt Bearing Collar Housing Unit
Diam. Float Size Number Number Number Wt.
in. in. in. in. in. in. in. in. in. in. in. in. in. in. lb
mm mm mm mm mm mm mm mm mm mm mm mm mm kg
3 1 27 13 1 1 5 3 11 7 5 1
SAL 1 ⁄16 ⁄4 2 3 ⁄32 3 ⁄16 2 ⁄8 5 ⁄2 7 ⁄8 ⁄4 ⁄16 2 ⁄32 1 ⁄8 ⁄2 SM1103KS S1103K T-12127 8.30
6.4 50.8 97.6 96.8 54 139.7 177.8 15.9 19 17.5 56.4 41.3 12.7 3.768
1 1 3 1 1 3 1 1 3 3 15 21 5
SAL 1 ⁄4 ⁄4 2 ⁄8 4 ⁄8 4 ⁄4 2 ⁄8 6 ⁄4 8 ⁄4 ⁄4 1 ⁄4 2 ⁄32 1 ⁄32 ⁄8 SM1104KS S1104K T-13108 11.54
6.4 60.33 104.8 108 60.3 158.8 210 19 25.4 19 62.7 42.1 15.9 5.239
7 1 3 1 1 3 1 1 3 3 15 21 5
SAL 1 ⁄16 ⁄4 2 ⁄8 4 ⁄8 4 ⁄4 2 ⁄8 6 ⁄4 8 ⁄4 ⁄4 1 ⁄4 2 ⁄32 1 ⁄32 ⁄8 SM1107KS S1107K T-13108 11.54
6.4 60.33 104.8 108 60.3 158.8 210 19 25.4 19 62.7 42.1 15.9 5.239
1 5 3 1 3 3 5 1 3 3 1 3 5
SAL 1 ⁄2 ⁄16 2 ⁄8 4 ⁄4 4 ⁄4 2 ⁄8 6 ⁄8 8 ⁄4 ⁄4 1 ⁄4 2 ⁄2 1 ⁄4 ⁄8 SM1108KTS S1108KT T-12121 13.53
7.9 60.33 108 120.6 60.3 168.3 210 19 25.4 19 63.5 44.4 15.9 6.143
11 5 3 11 3 3 5 1 3 3 19 3 5
SAL 1 ⁄16 ⁄16 2 ⁄8 4 ⁄32 4 ⁄4 2 ⁄8 6 ⁄8 8 ⁄4 ⁄4 1 ⁄4 2 ⁄32 1 ⁄4 ⁄8 SM1111KS S1111K T-12121 12.92
7.9 60.33 110.3 120.6 60.3 168.3 210 19 25.4 19 65.9 44.4 15.9 5.866
15 5 3 19 1 3 1 5 3 7 23 7 5
SAL 1 ⁄16 ⁄16 2 ⁄4 4 ⁄32 5 ⁄4 2 ⁄4 8 ⁄4 10 ⁄8 ⁄4 1 ⁄8 2 ⁄32 1 ⁄8 ⁄8 SM1115KS S1115K T-12313 17.87
7.9 69.85 116.7 133.4 69.8 210 269.9 19 25.4 22.2 69.1 47.6 15.9 8.113
3 5 1 13 3 1 3 3 7 1 9 5
SAL 2 ⁄16 ⁄16 3 ⁄8 5 ⁄32 5 ⁄4 3 ⁄8 9 11 ⁄8 ⁄4 1 ⁄8 3 ⁄8 2 ⁄32 ⁄8 SM1203KS S1203K A-5845 24.18
7.9 79.38 137.3 146 79.4 228.6 288.9 19 25.4 22.2 79.4 57.9 15.9 10.978
7 3 1 29 1 1 3 3 7 1 13 5
SAL 2 ⁄16 ⁄8 3 ⁄8 5 ⁄32 6 ⁄4 3 ⁄8 9 11 ⁄8 ⁄4 1 ⁄8 3 ⁄2 2 ⁄32 ⁄8 SM1207KS S1207K A-5083 28.40
9.5 79.38 150 158.8 79.4 228.6 288.9 19 25.4 22.2 88.9 61.1 15.9 12.894
11 9 3 5 3 1 1 5 7 1 1 5 17 3
SAL 2 ⁄16 ⁄32 3 ⁄4 6 ⁄32 6 ⁄4 3 ⁄2 10 ⁄4 12 ⁄8 ⁄8 1 ⁄8 1 ⁄16 3 ⁄8 2 ⁄32 ⁄4 SM1211KTS S1211K T-18940 35.02
7.1 95.25 156.4 171.4 88.9 259.7 320.7 22.2 28.6 27 92.1 64.3 19 15.889
15 25 3 27 1 1 1 5 7 1 1 31 7 3
SAL 2 ⁄16 ⁄64 3 ⁄4 6 ⁄32 7 ⁄2 3 ⁄2 10 ⁄4 12 ⁄8 ⁄8 1 ⁄8 1 ⁄16 3 ⁄32 2 ⁄8 ⁄4 SM1215KS S1215K A-5088 44.50
9.9 95.25 173.8 190.5 88.9 259.7 320.7 22.2 28.6 27 100.8 73 19 20.203
7 3 9 11 3 3 3 3 1 1 7 1 3
SAL 3 ⁄16 ⁄8 4 ⁄16 7 ⁄32 8 ⁄8 4 ⁄8 12 ⁄8 15 ⁄8 1 1 ⁄4 1 ⁄4 4 ⁄32 3 ⁄8 ⁄4 SM1307KS S1307K A-5206 73.75
9.5 115.89 186.5 212.7 111.1 314.3 390.6 25.4 31.8 31.8 107.2 79.4 19 33.482
218
TO ORDER, SPECIFY UNIT, SHAFT DIAMETER, AND WHETHER FIXED OR FLOATING. Example: SAOL 1 7⁄16" (one fixed, one floating).
Unit Shaft Total H O L1 A J L N N1 H1 A1 T J1(1) Bolt Bearing Collar Housing Unit
Diam. Float No. Size Number Number Number Wt.
in. in. in. in. in. in. in. in. in. in. in. in. in. in. In. lbs
mm mm mm mm mm mm mm mm mm mm mm mm mm mm kg
3 5 3 1 3 3 5 1 5 7 11 3 11 1
SAOL 1 ⁄16 ⁄16 2 ⁄8 4 ⁄16 4 ⁄8 2 ⁄8 6 ⁄8 8 ⁄4 ⁄8 ⁄8 ⁄16 2 ⁄8 1 ⁄16 — 2 ⁄2 SMN103KS SN103K T-12389 12.16
7.9 60.33 103.2 111.1 60.3 168.3 210 15.9 22.2 17.5 60.3 42.9 — 12.7 5.521
7 23 3 3 3 3 1 5 3 13 23 21 5
SAOL 1 ⁄16 ⁄64 2 ⁄4 4 ⁄8 4 ⁄4 2 ⁄4 8 ⁄4 10 ⁄8 ⁄4 1 ⁄16 2 ⁄32 1 ⁄32 — 2 ⁄8 SMN107KS SN107K A-4779 15.5
9.1 69.8 111.1 120.6 69.8 209.6 269.9 19 25.4 20.6 69.1 42.1 — 12.9 7.037
1 3 1 7 3 1 3 3 13 15 15 5
SAOL 1 ⁄2 ⁄8 3 ⁄8 4 ⁄8 5 ⁄4 3 ⁄8 9 11 ⁄8 ⁄4 1 ⁄16 2 ⁄16 1 ⁄16 — 2 ⁄8 SMN108KS SN108K A-4778A 25
9.5 79.4 123.8 146 79.4 228.6 288.9 19 25.4 20.6 74.6 49.2 — 12.9 11.35
11 3 1 7 3 1 3 3 13 15 15 5
SAOL 1 ⁄16 ⁄8 3 ⁄8 4 ⁄8 5 ⁄4 3 ⁄8 9 11 ⁄8 ⁄4 1 ⁄16 2 ⁄16 1 ⁄16 — 2 ⁄8 SMN111KS SN111K A-4778 24.56
9.5 79.4 123.8 146 79.4 228.6 288.9 19 25.4 20.6 74.6 49.2 — 12.9 11.15
15 3 1 13 1 1 3 3 13 29 29 5
SAOL 1 ⁄16 ⁄8 3 ⁄8 4 ⁄16 6 ⁄4 3 ⁄8 9 11 ⁄8 ⁄4 1 ⁄16 2 ⁄32 1 ⁄32 — 2 ⁄8 SMN115KS SN115K A-3818 27.45
9.5 79.4 122.2 158.8 79.4 228.6 288.9 19 25.4 20.6 73.8 48.4 — 12.9 12.462
3 23 3 1 3 1 1 5 7 1 1 1 1 3
SAOL 2 ⁄16 ⁄64 3 ⁄4 5 ⁄2 6 ⁄4 3 ⁄2 10 ⁄4 12 ⁄8 ⁄8 1 ⁄4 1 ⁄16 3 ⁄4 2 ⁄4 — 2 ⁄4 SMN203KS SN203K A-4755 33.94
9.1 95.25 139.7 171.4 88.9 259.7 320.7 22.2 31.8 27 82.6 57.2 — 19 15.409
7 11 1 29 1 1 3 7 1 1 19 5 3
SAOL 2 ⁄16 ⁄32 4 ⁄8 5 ⁄32 7 ⁄2 4 11 ⁄4 13 ⁄4 ⁄8 1 ⁄4 1 ⁄16 3 ⁄32 2 ⁄16 — 2 ⁄4 SMN207KS SN207K A-3819 41.5
8.7 104.8 150 190.5 101.6 285.8 349.2 22.2 31.8 27 91.3 58.7 — 19 18.841
11 3 9 7 1 3 3 1 1 5 9 7
SAOL 2 ⁄16 ⁄8 4 ⁄16 6 ⁄8 8 ⁄2 4 ⁄8 12 15 ⁄8 1 1 ⁄4 1 ⁄4 4 ⁄16 2 ⁄16 — 2 ⁄8 SMN211KS SO211K A-4709 58
9.5 115.89 174.6 215.9 111.1 304.8 390.6 25.4 31.8 31.8 109.5 65.1 — 22.2 26.332
15 1 9 7 3 3 3 1 1 1 7 7
SAOL 2 ⁄16 ⁄2 4 ⁄16 7 8 ⁄8 4 ⁄8 12 ⁄8 15 ⁄8 1 1 ⁄4 1 ⁄4 4 ⁄8 2 ⁄8 — 2 ⁄8 SMN215KS SN215K A-4798 74.5
12.7 115.89 177.8 225.4 111.1 314.3 390.6 25.4 31.8 31.8 104.8 73 — 22.2 33.823
3 33 9 1 1 3 3 3 1 1 1 1 7
SAOL 3 ⁄16 ⁄64 4 ⁄16 7 ⁄4 9 ⁄2 4 ⁄8 12 ⁄8 15 ⁄8 1 1 ⁄4 1 ⁄4 4 ⁄4 3 2 ⁄4 4 ⁄8 SMN303KS SN303K A-4780 77.75
13.1 115.89 184.2 241.3 111.1 314.3 390.6 25.4 31.8 31.8 108 76.2 57.2 22.2 35.298
7 17 1 1 1 3 3 1 1 1 3 1 7
SAOL 3 ⁄16 ⁄32 5 ⁄8 7 ⁄2 10 ⁄4 4 ⁄4 13 ⁄8 16 ⁄8 1 1 ⁄4 1 ⁄4 4 ⁄8 3 ⁄8 3 4 ⁄8 SMN307KS SN307K A-4155 107.5
13.5 130.2 190.5 260.4 120.6 339.7 409.6 25.4 31.8 31.8 111.1 79.4 76.2 22.2 48.805
11 1 11 13 15 3 5 1 1 1 1 5
SAOL 3 ⁄16 ⁄2 5 ⁄16 8 ⁄32 11 4 ⁄16 14 ⁄4 17 ⁄16 1 ⁄8 1 ⁄2 1 ⁄4 5 ⁄4 3 ⁄32 — 2 1 SMO311WS SO311K A-4156 120
12.7 144.5 213.5 279.4 125.4 374.6 439.7 28.6 38.1 31.8 133.4 80.2 — 25.4 54.48
15 11 21 3 1 1 1 1 1 3 21 1
SAOL 3 ⁄16 ⁄16 6 8 ⁄32 11 ⁄4 5 ⁄4 15 ⁄2 18 ⁄2 1 ⁄8 1 ⁄2 1 ⁄8 5 3 ⁄32 3 ⁄4 4 1 SMN315KS SN315K A-4795 156
17.5 152.4 219.9 298.4 133.4 393.1 469.9 28.6 38.1 34.9 127 92.9 82.6 25.4 70.824
3 5 1 7 1 1 11 1 1 1 1 9 19
SAOL 4 ⁄16 ⁄8 6 ⁄2 8 ⁄8 12 ⁄2 6 ⁄4 17 ⁄16 21 ⁄4 1 ⁄8 1 ⁄2 1 ⁄2 5 ⁄32 3 ⁄32 4 4 1 SMN403WS SN403K T-14342 194
15.9 165.1 225.4 317.5 158.8 449.3 539.8 28.6 38.1 38.1 134.1 91.3 101.6 25.4 88.076
7 9 7 3 11 1 1 3 3 5 11 1 1
SAOL 4 ⁄16 ⁄16 7 9 12 ⁄8 6 ⁄4 17 ⁄16 21 ⁄4 1 ⁄4 1 ⁄4 1 ⁄4 5 ⁄16 3 ⁄16 4 ⁄4 4 1 ⁄8 SMN407WS SN407K T-11469 210
14.3 177.8 228.6 327 171.4 449.3 539.8 31.8 44.4 44.4 134.9 93.6 108 28.6 95.34
15 15 1 5 1 1 13 1 3 5 3 1
SAOL 4 ⁄16 1 ⁄64 8 ⁄4 10 ⁄16 15 7 ⁄4 20 ⁄4 24 ⁄16 1 ⁄4 1 ⁄4 2 6 4 ⁄16 4 ⁄4 4 1 ⁄8 SMN415WS SN415K T-11783 353
31.4 209.6 261.9 381 184.2 514.4 630.2 31.8 44.4 50.8 152.4 109.5 120.6 28.6 160.262
(1)
When four bolts are used, dimension J1 is distance between centers, and A1 and T are measured from center of base.
219
P
Bearing Data
220
These units are factory prelubricated, but a grease fitting is provided for
relubrication if required. All units are supplied with self-locking collars.
Contact Timken Engineering to discuss highly corrosive applica-
tions (i.e. food processing, chemical exposure) where Fafnir TDC®
bearings can be utilized. Fafnir Safety End Caps available for selected sizes, E1 A
A1
E1 A
A1
1
E
see page 261. L SQUARE E
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: RCJ 1 3/16", TCJ 13⁄16 , POPULAR SIZES IN BOLD.
(2)
Unit Shaft L J A1 A E N E1 S1 D d1 Bearing Collar Housing Unit
Diam. ref. ref. ref. ±.015" max. ref. ref. ±.005" Number(1) Number Number Wt.
in. in. in. in. in. in. in. in. in. in. in. new lbs
mm mm mm mm mm mm mm mm mm mm mm RCJ (TCJ) (old) kg
1
RCJ ⁄2 G1008KRRB S1008K
5 1 13 27 35 59 1
RCJ 8 ⁄ 3 2 ⁄8 ⁄32 0.929 1.599 ⁄64 ⁄64 ⁄64 2 ⁄16 1.105 G1010KRRB S1010K T-40278 1.16
11
RCJ 16 ⁄ 76.2 54 9.5 23.6 40.6 10.7 13.9 23.4 52.4 28.1 G1011KRRB S1011K (T-16659) 0.526
RCJ 17 GE17KRRB SE17K
3 1 7 27 41 3 3
3 ⁄8 2 ⁄2 ⁄16 ⁄64 ⁄64 1 ⁄64 2 ⁄8
3
RCJ ⁄4 1.094 1.828 1.292 G1012KRRB S1012K T-40267 1.6
RCJ 20 85.7 63.5 11.1 27.8 46.4 10.7 16.3 26.6 60.3 32.8 GE20KRRB SE20K (T-16661) 0.726
7
RCJ,TCJ 8 ⁄ G1014KRRB (KPPB3) S1014K
15 3 3 1 29 5 1 9
RCJ,TCJ 16 ⁄ 3 ⁄4 2 ⁄4 ⁄2 1.100 1.834 ⁄64 ⁄8 1 ⁄16 2 ⁄16 1.480 G1015KRRB (KPPB3) S1015K T-40262 2.07
RCJ,TCJ 1 95.2 69.8 12.7 27.9 46.6 11.5 15.9 27 65.1 37.6 G1100KRRB (KPPB3) S1100K (T-16663) 0.939
RCJ,TCJ 25 GE25KRRB (KPPB3) SE25K
1
RCJ,TCJ 1 ⁄16 G1101KRRB (KPPB3) S1101K
1 1 1 17 29 11 3
RCJ,TCJ 1 ⁄8 4 ⁄4 3 ⁄4 ⁄32 1.178 1.990 ⁄64 ⁄16 1 ⁄16 3 1.730 G1102KRRB (KPPB3) S1102K T-40266 2.87
3
RCJ,TCJ 1 ⁄16 107.9 82.6 13.5 29.9 50.5 11.5 17.5 30.2 76.2 43.9 G1103KRRB (KPPB3) S1103K (T-16664) 1.302
RCJ,TCJ 30 GE30KRRB (KPPB3) SE30K
1
RCJ,TCJ 1 ⁄4 G1104KRRB (KPPB2) S1104K
5 5 5 17 33 3 9 1
RCJ,TCJ 1 ⁄16 4 ⁄8 3 ⁄8 ⁄32 1.254 2.106 ⁄64 ⁄4 1 ⁄32 3 ⁄2 2.112 G1105KRRB (KPPB2) S1105K T-40253 3.94
3
RCJ,TCJ 1 ⁄8 117.5 92.1 13.5 31.8 53.5 13.1 19 32.5 88.9 53.6 G1106KRRB (KPPB2) S1106K (T-16617) 1.787
7
RCJ,TCJ 1 ⁄16 G1107KRRB (KPPB2) S1107K
RCJ,TCJ 35 GE35KRRB (KPPB2) SE35K
1 9 33 13 3 7
5 ⁄8 ⁄16 ⁄64 ⁄16 1 ⁄8 3 ⁄8
1
RCJ,TCJ 1 ⁄2 4 1.500 2.334 2.292 G1108KRRB (KPPB3) S1108KT T-40263 5.05
9
RCJ,TCJ 1 ⁄16 130.2 101.6 14.3 38.1 59.3 13.1 20.6 34.9 98.4 58.2 G1109KRRB (KPPB3) S1109KT (T-16666) 2.291
RCJ,TCJ 40 GE40KRRB (KPPB3) SE40K
5
RCJ,TCJ 1 ⁄8 G1110KRRB (KPPB4) S1110K
3 1 9 33 25 3 1
5 ⁄8 4 ⁄8 ⁄16 ⁄64 ⁄32 1 ⁄8 4 ⁄8
11
RCJ,TCJ 1 ⁄16 1.531 2.334 2.480 G1111KRRB (KPPB4) S1111K T-40264 5.7
3
RCJ,TCJ 1 ⁄4 136.5 104.8 14.3 38.9 59.3 13.1 19.8 34.9 104.8 63.0 G1112KRRB (KPPB4) S1112K (T-16667) 2.585
RCJ,TCJ 45 GE45KRRB (KPPB4) SE45K
7 5 3 9 43 29 1 7
RCJ,TCJ 1 ⁄8 5 ⁄8 4 ⁄8 ⁄16 1.688 2.615 ⁄64 ⁄32 1 ⁄2 4 ⁄16 2.730 G1114KRRB (KPPB3) S1114K T-40265 6.65
15
RCJ,TCJ 1 ⁄16 142.9 111.1 14.3 42.9 66.4 17.1 23 38.1 112.7 69.3 G1115KRRB (KPPB3) S1115K (T-16668) 3.016
RCJ,TCJ 50 GE50KRRB (KPPB3) SE50K
221
3
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: RCJC 1 ⁄16"
Unit Shaft L J A1 A E N E1 B D d1 S1 Bearing Collar Housing Unit
Diam. Number Number Number Wt.
in. in. in. in. in. in. in. in. in. in. in. in. lb
mm mm mm mm mm mm mm mm mm mm mm kg
5 1 7 7 3 25 5 3 1 11 39
RCJC ⁄8 3 2 ⁄8 ⁄16 ⁄8 1 ⁄16 ⁄64 ⁄16 1 ⁄64 2 ⁄16 1 ⁄32 ⁄64 GC1010KRRB C203 T-27113 1.07
76.2 53.98 11.1 22.2 30.2 9.9 7.9 26.6 52.4 34.1 15.5 0.486
3 3 1 7 1 9 25 17 7 3 1 47
RCJC ⁄4 3 ⁄8 2 ⁄2 ⁄16 1 ⁄64 1 ⁄32 ⁄64 ⁄64 1 ⁄32 2 ⁄8 1 ⁄2 ⁄64 GC1012KRRB C204 T-26605 1.42
85.7 63.5 11.1 25.8 32.5 9.9 6.7 31 60.3 38.1 18.7 0.645
3 3 7 1 27 29 19 11 9 3 51
RCJC 1 3 ⁄4 2 ⁄4 ⁄16 1 ⁄8 1 ⁄64 ⁄64 ⁄64 1 ⁄32 2 ⁄16 1 ⁄4 ⁄64 GC1100KRRB C205 T-26614 1.72
95.2 69.85 11.1 28.6 36.1 11.5 7.5 34.1 65.1 44.4 20.2 0.781
1 1 1 1 3 35 29 23 15 1 57
RCJC 1 ⁄8 4 ⁄4 3 ⁄4 ⁄2 1 ⁄16 1 ⁄64 ⁄64 ⁄64 1 ⁄32 3 2 ⁄16 ⁄64 GC1102KRRB C206 T-26630 2.5
3
RCJC 1 ⁄16 107.9 82.55 12.7 30.2 39.3 11.5 9.1 37.3 76.2 52.4 22.6 GC1103KRRB
1
RCJC 1 ⁄4 S GC1103KRRB3 1.135
1 5 5 9 11 3 33 13 5 1 11
RCJC 1 ⁄4 4 ⁄8 3 ⁄8 ⁄16 1 ⁄32 1 ⁄4 ⁄64 ⁄32 1 ⁄8 3 ⁄2 2 ⁄32 1 GC1104KRRB C207 T-26665 3.76
3
RCJC 1 ⁄8 117.5 92.08 14.3 34.1 44.4 13.1 10.3 41.3 88.9 59.5 25.4 GC1106KRRB 1.707
7
RCJC 1 ⁄16 GC1107KRRB
1 1 11 19 1 33 27 47 7 11 5
RCJC 1 ⁄2 5 ⁄8 4 ⁄16 1 ⁄32 2 ⁄64 ⁄64 ⁄64 1 ⁄64 3 ⁄8 2 ⁄16 1 ⁄64 GC1108KRRB C208 T-16666A 4.93
130.2 101.6 17.5 40.5 51.2 13.1 10.7 44.1 98.4 68.3 27.4 2.238
11 3 1 11 5 3 33 15 27 1 7 5
RCJC 1 ⁄16 5 ⁄8 4 ⁄8 ⁄16 1 ⁄8 2 ⁄32 ⁄64 ⁄32 1 ⁄32 4 ⁄8 2 ⁄8 1 ⁄32 GC1111KRRB C209 T-16667A 5.59
3
RCJC 1 ⁄4 136.5 104.78 17.5 41.3 53.2 13.1 11.9 46.8 104.8 73 29.4 GC1112KRRB 2.538
15 5 3 5 21 5 43 1 29 7 1 3
RCJC 1 ⁄16 5 ⁄8 4 ⁄8 ⁄8 1 ⁄32 2 ⁄32 ⁄64 ⁄2 1 ⁄32 4 ⁄16 3 ⁄8 1 ⁄16 GC1115KRRB C210 T-26700 6.16
142.9 111.12 15.9 42.1 54.8 17.1 12.7 48.4 112.7 79.4 30.2 2.797
3 1 3 3 5 43 9 1 3 1 5
RCJC 2 6 ⁄8 5 ⁄8 ⁄4 1 ⁄4 2 ⁄16 ⁄64 ⁄16 2 ⁄8 4 ⁄4 3 ⁄2 1 ⁄16 GC1200KRRB C211 T-26712 8.89
3
RCJC 2 ⁄16 161.9 130.18 19 44.4 58.7 17.1 14.3 54 120.6 88.9 33.33 GC1203KRRB 4.036
7 7 5 3 7 19 41 23 3 3 3 15
RCJC 2 ⁄16 6 ⁄8 5 ⁄8 ⁄4 1 ⁄8 2 ⁄32 ⁄64 ⁄32 2 ⁄8 5 ⁄8 3 ⁄4 1 ⁄32 GC1207KRRB C212 T-26726 10.85
174.6 142.88 19 47.6 65.9 16.3 18.3 60.3 136.5 95.2 37.3 4.926
15 3 7 1 31 25 27 25 3 1 23
RCJC 2 ⁄16 7 ⁄4 6 ⁄8 2 ⁄8 2 ⁄32 ⁄32 ⁄32 2 ⁄32 6 ⁄8 4 ⁄2 1 ⁄32 GC1215KRRB C215 T-27128 16.46
196.8 152.4 22.2 54 75.4 19.8 21.4 70.6 161.9 114.3 43.7 7.473
222
Setscrew Series G
BOLT SIZE
The Fafnir YCJ flange cartridges are basically the same design as the
RCJ series except they use specially designed setscrews rather than D B
the concentric collar as the shaft locking device. All YCJ units are F
1
Recommended shaft tolerances: ⁄2"-1 15⁄16", nominal to -.0005", -.013mm;
2"-2 15⁄16", nominal to -.0010", -.025mm.
1
223
J SQUARE S1
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: VCJ 1", POPULAR SIZES IN BOLD.
in. in. in. in. in. in. in. in. in. in. in. new lbs
mm mm mm mm mm mm mm mm mm mm mm (old) kg
1 1 13 27 1 1 7
VCJ ⁄2 3 2 ⁄8 ⁄32 0.929 1.548 ⁄64 1 ⁄8 2 ⁄16 1.105 ⁄8 GRA008RRB S1008K T-40278 1.16
5
VCJ ⁄8 76.2 53.98 10.3 23.6 39.3 10.7 28.6 52.4 28.1 22.2 GRA010RRB S1010K (T-16659) 0.527
VCJ 17 GRAE17RRB SE17K
3 1 7 27 7 3 59
3 ⁄8 2 ⁄2 ⁄16 ⁄64 1 ⁄32 2 ⁄8 ⁄64
3
VCJ ⁄4 1.094 1.706 1.292 GRA012RRB S1012K T-40267 1.44
VCJ 20 85.7 63.5 11.1 27.8 43.3 10.7 31 60.3 32.8 23.4 GRAE20RRB SE20K (T-16661A) 0.654
7
VCJ 8 ⁄ GRA014RRB S1014K
15 3 3 1 29 7 9 59
VCJ 16 ⁄ 3 ⁄4 2 ⁄4 ⁄2 1.100 1.696 ⁄64 1 ⁄32 2 ⁄16 1.480 ⁄64 GRA015RRB S1015K T-40262 1.97
VCJ 1 95.2 69.85 12.7 27.9 43.1 11.5 31 65.1 37.6 23.4 GRA100RRB S1100K (T-16663A) 0.894
VCJ 25 GRAE25RRB SE25K
1
VCJ 1 ⁄8 GRA102RRB S1102K
1 1 17 29 13 1
4 ⁄4 3 ⁄4 ⁄32 ⁄64 1 ⁄32 1 ⁄16
3
VCJ 1 ⁄16 1.178 1.856 3 1.730 GRA103RRB S1103K T-40266 2.73
1
VCJ 1 ⁄4 S 107.9 82.55 13.5 29.9 47.1 11.5 35.7 76.2 43.9 27 GRA103RRB2 S1103K3 (T-16664A) 1.239
VCJ 30 GRAE30RRB SE30K
1 5 5 17 33 17 1 5
VCJ 1 ⁄4 4 ⁄8 3 ⁄8 ⁄32 1.254 1.989 ⁄64 1 ⁄32 3 ⁄2 2.112 1 ⁄32 GRA104RRB S1104K T-40253 3.76
3
VCJ 1 ⁄8 117.5 92.08 13.5 31.8 50.5 13.1 38.9 88.9 53.6 29.4 GRA106RRB S1106K (T-16617A) 1.707
7
VCJ 1 ⁄16 GRA107RRB S1107
VCJ 35 GRAE35RRB SE35K
1 1 9 33 23 7 9
VCJ 1 ⁄2 5 ⁄8 4 ⁄16 1.500 2.297 ⁄64 1 ⁄32 3 ⁄8 2.292 1 ⁄32 GRA108RRB S1108KT T-40263 4.79
VCJ 40 130.2 101.6 14.3 38.1 58.3 13.1 43.7 98.4 58.2 32.5 GRAE40RRB SE40K (T-16666A) 2.175
5
VCJ 1 ⁄8 GRA110RRB S1110K
3 1 9 33 23 1 9
5 ⁄8 4 ⁄8 ⁄16 ⁄64 1 ⁄32 4 ⁄8 1 ⁄32
11
VCJ 1 ⁄16 1.531 2.244 2.480 GRA111RRB S1111K T-40264 5.37
3
VCJ 1 ⁄4 136.5 104.78 14.3 38.9 57.0 13.1 43.7 104.8 63.0 32.5 GRA112RRB S1112K (T-16667A) 2.438
VCJ 45 GRAE45RRB SE45K
7
VCJ 1 ⁄8 GRA114RRB S1114K
5 3 9 43 23 7 9
5 ⁄8 4 ⁄8 ⁄16 ⁄64 1 ⁄32 4 ⁄16 1 ⁄32
15
VCJ 1 ⁄16 1.688 2.400 2.730 GRA115RRB S1115K T-40265 6.14
VCJ 2S 142.9 111.12 14.3 42.9 61.0 17.1 43.7 112.7 69.3 32.5 GRA115RRB2 S1115K2 (T-16668A) 2.788
VCJ 50 GRAE50RRB SE50K
3 1 21 43 29 3 7
VCJ 2 6 ⁄8 5 ⁄8 ⁄32 1.844 2.672 ⁄64 1 ⁄32 4 ⁄4 2.980 1 ⁄16 GRA200RRB S1200K T-40236 7.2
3
VCJ 2 ⁄16 161.9 130.18 16.7 46.8 67.9 17.1 48.4 120.6 75.7 36.5 GRA203RRB S1203K (T-16683A) 3.269
VCJ 55 GRAE55RRB SE55K
224
J SQUARE E
SCJ Standard Series N
S1
HOLE SIZE
The Fafnir SCJ flange cartridges are furnished assembled and ready
for mounting by means of four bolts through the flange. SCJ Series
are ideal for applications where minimum shaft length is required.
The units are assembled with GYA-RRB bearings with positive
contact land-riding seals, and setscrew locking. These units are D B
F
factory prelubricated, but a grease fitting is provided for relubrication
if required.
Fafnir Safety End Caps available for selected sizes, see page 261.
Bearing Data
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: SCJ 1", POPULAR SIZES IN BOLD.
Unit Shaft
Diam.
L J A1 A E N B D F S1 Bearing
Number
Housing
Number
Unit
Wt.
1
in. in. in. in. in. in. in. in. in. in. in. lbs
mm mm mm mm mm mm mm mm mm mm mm kg
1 1 7 45 33 15 1 31 5
SCJ ⁄2 3 2 ⁄8 ⁄16 ⁄64 1 ⁄64 ⁄16 2 ⁄16 ⁄32 ⁄8 GYA008RRB T-40124 1.03
5
SCJ ⁄8 76.2 53.98 11.1 17.9 25.4 13.1 23.8 52.4 24.6 15.9 GYA010RRB 0.47
SCJ 17 GYAE17RRB
3 1 7 3 1 27 1 3 9 23
3 ⁄8 2 ⁄2 ⁄16 ⁄4 1 ⁄8 ⁄64 1 ⁄16 2 ⁄8 1 ⁄64 ⁄32
3
SCJ ⁄4 GYA012RRB T-40126 1.14
SCJ 20 85.7 63.5 11.1 19 28.6 10.7 27 60.3 29 18.3 GYAE20RRB 0.52
7
SCJ 8 ⁄ GYA014RRB
15 3 3 17 25 11 29 7 9 21 49
SCJ 16 ⁄ 3 ⁄4 2 ⁄4 ⁄32 ⁄32 1 ⁄64 ⁄64 1 ⁄64 2 ⁄16 1 ⁄64 ⁄64 GYA015RRB T-40128 1.5
SCJ 1 95.2 69.85 13.5 19.8 29.8 11.5 28.2 65.1 33.7 19.4 GYA100RRB 0.68
SCJ 25 GYAE25RRB
1
SCJ 1 ⁄8 GYA102RRB
3 1 1 9 27 11 29 9 37 29
SCJ 1 ⁄16 4 ⁄4 3 ⁄4 ⁄16 ⁄32 1 ⁄32 ⁄64 1 ⁄32 3 1 ⁄64 ⁄32 GYA103RRB T-40130 2.62
1
SCJ 1 ⁄4 S 107.9 82.55 14.3 21.4 34.1 11.5 32.5 76.2 40.1 23 GYA103RRB2 1.19
SCJ 30 GYAE30RRB
1
SCJ 1 ⁄4 GYA104RRB
3 5 5 19 31 1 33 7 1 27 1
SCJ 1 ⁄8 4 ⁄8 3 ⁄8 ⁄32 ⁄32 1 ⁄2 ⁄64 1 ⁄16 3 ⁄2 1 ⁄32 1 ⁄64 GYA106RRB T-40132 2.98
7
SCJ 1 ⁄16 117.5 92.08 15.1 24.6 38.1 13.1 36.5 88.9 46.8 25.8 GYA107RRB 1.35
SCJ 35 GYAE35RRB
1 1 5 1 39 33 35 7 1 3
SCJ 1 ⁄2 5 ⁄8 4 ⁄8 1 ⁄32 1 ⁄64 ⁄64 1 ⁄64 3 ⁄8 2 ⁄16 1 ⁄32 GYA108RRB T-40134 4.63
SCJ 40 130.2 101.6 15.9 26.2 40.9 13.1 39.3 98.4 52.4 27.8 GYAE40RRB 2.1
5
SCJ 1 ⁄8 GYA110RRB
11 3 1 5 1 23 33 21 1 9 1
SCJ 1 ⁄16 5 ⁄8 4 ⁄8 ⁄8 1 ⁄8 1 ⁄32 ⁄64 1 ⁄32 4 ⁄8 2 ⁄32 1 ⁄8 GYA111RRB T-40164 4.94
3
SCJ 1 ⁄4 136.5 104.78 15.9 28.6 43.6 13.1 42.1 104.8 57.9 28.6 GYA112RRB 2.24
SCJ 45 GYAE45RRB
5 3 21 1 13 43 3 7 15 7
5 ⁄8 4 ⁄8 ⁄32 1 ⁄8 ⁄16 ⁄64 1 ⁄4 4 ⁄16 2 ⁄32 1 ⁄32
15
SCJ 1 ⁄16 1 GYA115RRB T-40166 5.63
SCJ 2S 142.9 111.12 16.7 28.6 46 17.1 44.4 112.7 62.6 30.9 GYA115RRB2 2.55
SCJ 50 GYAE50RRB
3 1 23 7 57 43 53 3 3 1
SCJ 2 6 ⁄8 5 ⁄8 ⁄32 1 ⁄32 1 ⁄64 ⁄64 1 ⁄64 4 ⁄4 2 ⁄4 1 ⁄4 GYA200RRB T-40168 6.53
3
SCJ 2 ⁄16 161.9 130.18 18.2 30.9 48 17.1 46.4 120.6 69.8 31.7 GYA203RRB 2.96
SCJ 55 GYAE55RRB
225
Heavy Series N
HOLE SIZE
The Fafnir RCJO and LCJO type heavy series flange cartridges are
similar in design to the standard series. They are ideal for applica-
tions where minimum machining is to be done and are supplied
completely assembled, being mounted in place by means of bolts D
d1
through the flange.
RCJO units are assembled with GN-KRRB (R-Seal) wide inner
ring bearings, and LCJO units are equipped with GN-KLLB wide inner
ring bearings. These units are factory prelubricated, but a grease
fitting is provided for relubrication if required. Units are supplied with
self-locking collars and are dimensionally interchangeable. A1
E1 A
7
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: RCJO 1 ⁄16", LCJO 1 11⁄16"
Unit Shaft L J A1 A E N E1 S1 D d1 Bolt Bearing Collar Housing Unit
Diam. ref. ref. ref. ±.010" max. ref. ref. ref. ±.005" Size Number Number Number Wt.
in. in. in. in. in. in. in. in. in. in. in. in. lbs
mm mm mm mm mm mm mm mm mm mm mm kg
3 3 5 9 9 19 9 13 1
RCJO 1 ⁄16 4 ⁄4 3 ⁄8 ⁄16 1.500 2.115 ⁄16 ⁄32 1 ⁄32 3 ⁄16 1.918 ⁄2 GN103KRRB SN103K T-19165 4.0
120.6 92.1 14.3 38.1 53.7 14.3 15.1 32.5 96.8 48.7 12.7 1.816
7 1 5 9 9 5 1 1
RCJO 1 ⁄16 5 ⁄8 4 ⁄8 1.594 2.177 ⁄16 ⁄16 1 ⁄16 4 ⁄8 2.168 ⁄2 GN107KRRB SN107 T-19167 5.50
130.2 101.6 15.9 40.5 55.3 14.3 14.3 33.3 104.8 55.1 12.7 2.497
1 3 1 5 5 5 15 1 9
RCJO 1 ⁄2 5 ⁄8 4 ⁄8 ⁄8 1.750 2.396 ⁄8 ⁄8 1 ⁄32 4 ⁄2 2.480 ⁄16 GN108KRRB SN108K T-19169 6.90
136.5 104.8 15.9 44.4 60.8 15.9 15.9 37.3 114.3 63.0 14.3 3.133
11 5 3 11 5 19 17 7 9
RCJO 1 ⁄16 5 ⁄8 4 ⁄8 ⁄16 1.844 2.458 ⁄8 ⁄32 1 ⁄32 4 ⁄8 2.730 ⁄16 GN111KRRB SN111K T-19171 7.87
142.9 111.1 17.5 46.8 62.4 15.9 15.1 38.9 123.8 69.3 14.3 3.573
15 1 1 11 11 21 21 9 5
RCJO 1 ⁄16 6 ⁄2 5 ⁄8 ⁄16 2.094 2.771 ⁄16 ⁄32 1 ⁄32 5 ⁄16 2.980 ⁄8 GN115KRRB SN115K T-19173 11.42
165.1 130.2 17.5 53.2 70.4 17.5 16.7 42.1 141.3 75.7 15.9 5.185
3 5 11 11 11 25 1 5
RCJO 2 ⁄16 7 5 ⁄8 ⁄16 2.312 3.021 ⁄16 ⁄16 1 ⁄32 6 ⁄16 3.230 ⁄8 GN203KRRB SN203K T-19175 14.15
177.8 142.9 17.5 58.7 76.7 17.5 17.5 45.2 154 82.0 15.9 6.424
7 1 7 3 13 3 29 5 3
RCJO 2 ⁄16 7 ⁄2 5 ⁄8 ⁄4 2.562 3.333 ⁄16 ⁄4 1 ⁄32 6 ⁄16 3.480 ⁄4 GN207KRRB SN207K T-19177 16.32
190.5 149.2 19 65.1 84.7 20.6 19 48.4 160.3 88.4 19 7.409
11 7 7 15 27 5 5 7
RCJO 2 ⁄16 8 ⁄8 7 ⁄8 2.844 3.521 ⁄16 ⁄32 2 ⁄32 7 ⁄16 3.980 ⁄8 GN211KRRB SO211K T-19179 21.0
225.4 177.8 22.2 72.2 89.4 23.8 21.4 54.8 185.7 101.1 22.2 9.534
15 1 1 7 15 1 15 13 7
RCJO 2 ⁄16 9 ⁄8 7 ⁄4 ⁄8 3.062 4.146 ⁄16 1 ⁄16 2 ⁄32 7 ⁄16 4.418 ⁄8 GN215KRRB SN215K T-19181 31.12
231.8 184.2 22.2 77.8 105.3 23.8 27 62.7 198.4 112.2 22.2 14.128
7 1 1 1 7 29
RCJO 3 ⁄16 11 8 ⁄2 1 ⁄8 3.312 4.770 1 ⁄16 1 ⁄16 2 ⁄32 9 5.210 1 GN307KRRB SN307K T-24475 47.3
279.4 215.9 28.6 84.1 121.2 27 36.5 73.8 228.6 132.3 25.4 21.474
15 1 1 1 3 7 3 1 1
RCJO 3 ⁄16 12 ⁄2 9 ⁄2 1 ⁄4 3.812 5.260 1 ⁄16 1 ⁄16 3 ⁄32 10 ⁄2 5.730 1 ⁄8 GN315KRRB SN315K T-24477 67.5
317.5 241.3 31.8 96.8 133.6 30.2 36.5 78.6 266.7 145.5 28.6 30.645
226
in. in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm
1 1 17 1 7 3
YCJM 1 4 ⁄4 3 ⁄4 ⁄32 1.178 1.671 1 ⁄2 3 1.587 ⁄8 ⁄8 GYM1100KRRB
107.9 82.6 13.5 29.9 42.4 38.1 76.2 40.31 22.2 10
3 5 5 17 11 1 1
YCJM 1 ⁄16 4 ⁄8 3 ⁄8 ⁄32 1.254 1.827 1 ⁄16 3 ⁄2 1.843 1 ⁄2 GYM1103KRRB
117.5 92.1 13.5 31.8 46.4 42.9 88.9 46.81 25.4 12
7 1 9 15 7 3 1
YCJM 1 ⁄16 5 ⁄8 4 ⁄16 1.500 2.141 1 ⁄16 3 ⁄8 2.058 1 ⁄16 ⁄2 GYM1107KRRB
130.2 101.6 14.8 38.1 59.4 49.2 98.4 52.27 30.2 12
1 3 1 9 15 1 3 1
YCJM 1 ⁄2 5 ⁄8 4 ⁄8 ⁄16 1.531 2.141 1 ⁄16 4 ⁄8 2.28 1 ⁄16 ⁄2 GYM1108KRRB
136.5 104.8 14.3 38.9 54.4 49.2 104.8 57.92 30.2 12
11 5 3 9 1 7 9 5
YCJM 1 ⁄16 5 ⁄8 4 ⁄8 ⁄16 1.688 2.390 2 ⁄32 4 ⁄16 2.474 1 ⁄32 ⁄8 GYM1111KRRB
3
YCJM 1 ⁄4 142.9 111.1 14.3 42.9 60.7 51.6 112.7 62.84 32.5 16 GYM1112KRRB
15 3 1 21 3 3 15 5
YCJM 1 ⁄16 6 ⁄8 5 ⁄8 ⁄32 1.844 2.546 2 ⁄16 4 ⁄4 2.747 1 ⁄16 ⁄8 GYM1115KRRB
YCJM 2 161.9 130.2 16.7 46.8 64.7 55.6 120.7 69.77 33.3 16 GY1200KRRB
3 7 5 11 9 3 9 5
YCJM 2 ⁄16 6 ⁄8 5 ⁄8 ⁄16 1.937 2.926 2 ⁄16 5 ⁄8 3.011 1 ⁄16 ⁄8 GYM1203KRRB
1
YCJM 2 ⁄4 174.6 142.9 17.5 49.2 74.3 65.1 136.5 76.48 39.1 16 GY1204KRRB
7 3 7 3 3 11 5
YCJM 2 ⁄16 7 ⁄8 5 ⁄8 ⁄4 2.500 3.208 2 ⁄4 6 3.422 1 ⁄16 ⁄8 GYM1207KRRB
1
YCJM 2 ⁄2 187.3 149.2 19.0 63.5 81.5 69.9 152.4 86.92 42.9 16 GYM1208KRRB
11 3 7 1 3 3 3
YCJM 2 ⁄16 7 ⁄4 6 ⁄8 2.625 3.396 3 ⁄16 6 ⁄8 3.619 1 ⁄4 ⁄4 GYM1211KRRB
196.8 152.4 22.2 66.7 86.2 77.8 161.9 91.92 44.4 20
15 3 7 1 1 15 3
YCJM 2 ⁄16 7 ⁄4 6 ⁄8 2.625 3.576 3 ⁄16 7 ⁄16 3.873 1 ⁄16 ⁄4 GYM1215KRRB
YCJM 3 196.8 152.4 22.2 66.7 90.8 77.8 179.4 98.37 44.4 20 GYM1300KRRB
7 7 17 25 3 7 3
YCJM 3 ⁄16 8 ⁄16 9 ⁄32 1 2.776 3.981 3 ⁄32 7 ⁄4 4.397 2 ⁄32 ⁄4 GYM1307KRRB
214.3 242.1 25.4 70.5 101.1 95.94 196.8 111.68 56.4 20
15 9 3 1 5 1 11
YCJM 3 ⁄16 10 ⁄16 11 ⁄4 1 ⁄4 3.755 5.014 4 ⁄8 9 ⁄4 5.171 2 ⁄16 1 GYM1315KRRB
268.3 298.4 31.8 95.4 127.3 117.35 235.0 131.3 68.3 25
227
7
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: YCJM 1 ⁄16"
Unit Shaft H J L A E B A1 F S1 Bolt Bearing
Dia. ref. ±.010" ref. ±.015" max. ref. ±.001" G Number
in. in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm
9 19 1 1 17 7 3
YCJTM 1 5 ⁄16 4 ⁄32 3 ⁄8 1.178 1.671 1 ⁄2 ⁄32 1.587 ⁄8 ⁄8 GYM1100KRRB
141.3 116.7 79.5 29.9 42.4 38.1 13.5 40.31 22.2 10
3 1 1 5 11 15 1
YCJTM 1 ⁄16 6 ⁄8 5 ⁄8 3 ⁄8 1.254 1.827 1 ⁄16 ⁄32 1.843 1 ⁄2 GYM1103KRRB
155.6 130.2 92.1 31.8 46.4 42.9 11.9 46.79 25.4 12
7 3 21 1 15 1 3 1
YCJTM 1 ⁄16 6 ⁄4 5 ⁄32 4 ⁄8 1.500 2.141 1 ⁄16 ⁄2 2.058 1 ⁄16 ⁄2 GYM1107KRRB
171.5 143.7 104.8 38.1 54.4 49.2 12.7 52.27 30.2 12
1 1 27 3 15 1 3 1
YCJTM 1 ⁄2 7 ⁄16 5 ⁄32 4 ⁄8 1.531 2.141 1 ⁄16 ⁄2 2.280 1 ⁄16 ⁄2 GYM1108KRRB
179.4 148.4 111.1 38.9 54.4 49.2 12.7 57.92 30.2 12
11 7 3 9 1 1 9 5
YCJTM 1 ⁄16 7 ⁄16 6 ⁄16 4 ⁄16 1.688 2.390 2 ⁄32 ⁄2 2.473 1 ⁄32 ⁄8 GYM1111KRRB
3
YCJTM 1 ⁄4 188.9 157.2 115.9 42.9 60.7 51.6 12.7 62.81 32.5 16 GYM1112KRRB
15 1 1 3 21 15 5
YCJTM 1 ⁄16 8 ⁄2 7 ⁄4 5 1.844 2.546 2 ⁄16 ⁄32 2.747 1 ⁄16 ⁄8 GYM1115KRRB
YCJTM 2 215.9 184.2 127.0 46.8 64.7 55.6 16.7 69.77 33.3 16 GY1200KRRB
228
Industrial Series
Fafnir RCJT, TCJT, and LCJT flange cartridges are basically the same
design as the RCJ, TCJ, and LCJ types except they have two bolt holes H d1
J
instead of four. They are designed chiefly to fill the need for applications
where the mounting area is restricted.
The RCJT flange cartridge is equipped with G-KRRB (R-Seal) wide
inner ring bearings, the TCJT with G-KPPB (Tri-Ply Seal) wide inner ring
bearings, and the LCJT with the G-KLLB (Mechani-Seal) wide inner ring
bearings. A1
These units are factory prelubricated, but a grease fitting is L A
provided for relubrication if required. All units are supplied with self- E
locking collars. Bearing Data
Contact Timken Engineering to discuss highly corrosive
Unit Bearing Number Dimensions and Load Ratings
applications (i.e. food processing, chemical exposure) where Fafnir
TDC® bearings can be utilized. Fafnir Safety End Caps available for RCJT G-KRRB Page 178
selected sizes, see page 261. TCJT G-KPPB Page 189 1
LCJT G-KLLB Page 186
Recommended shaft tolerances: 1⁄2"-1 15⁄16", nominal to -.0005", -.013mm;
2"- 2 3⁄16", nominal to -.0010", -.025mm.
3
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: RCJT 1 ⁄16",TCJT 1 3⁄16 ; POPULAR SIZES IN BOLD.
Unit Shaft H J L A N E A1 d1 Bearing Collar Housing Unit
Diam. ref. ± .010" ref. ± .015" max. ref. ± .005" Number Number Number Wt.
in. in. in. in. in. in. in. in. in. new lbs
mm mm mm mm mm mm mm mm mm RCJT TCJT (old) kg
1
RCJT ⁄2 G1008KRRB — S1008K
5 7 1 27 13
RCJT ⁄8 3 ⁄8 3 2 ⁄8 0.929 ⁄64 1.599 ⁄32 1.105 G1010KRRB — S1010K T-40219 1.30
11
RCJT ⁄16 98.4 76.2 54.0 23.6 10.7 40.6 10.3 28.1 G1011KRRB — S1011K 0.590
RCJT 17 GE17KRRB — SE17K
13 17 3 27 7
4 ⁄32 3 ⁄32 2 ⁄8 ⁄64 ⁄16
3
RCJT ⁄4 1.094 1.828 1.292 G1012KRRB — S1012K T-40220 1.30
RCJT 20 111.9 89.7 60.5 27.8 10.7 46.4 11.1 32.8 GE20KRRB — SE20K 0.590
13
RCJT,TCJT ⁄16 G1013KRRB G1013KPPB3 S1013K
7 7 29 3 29 7
RCJT,TCJT ⁄8 4 ⁄8 3 ⁄32 2 ⁄4 1.100 ⁄64 1.839 ⁄16 1.480 G1014KRRB G1014KPPB3 S1014K T-40221 1.73
15
RCJT,TCJT ⁄16 123.8 99.2 69.8 27.9 11.5 46.7 11.1 23.9 G1015KRRB G1015KPPB3 S1015K (T-21412P) 0.785
RCJT,TCJT 1 G1100KRRB G1100KPPB3 S1100K
RCJT,TCJT 25 GE25KRRB GE25KPPB3 SE25K
1
RCJT,TCJT 1 ⁄16 G1101KRRB G1101KPPB3 S1101K
1 9 19 1 29 15
RCJT,TCJT 1 ⁄8 5 ⁄16 4 ⁄32 3 ⁄8 1.178 ⁄64 1.990 ⁄32 1.730 G1102KRRB G1102KPPB3 S1102K T-40222 2.40
3
RCJT,TCJT 1 ⁄16 141.3 116.7 79.4 29.9 11.5 50.5 11.9 43.7 G1103KRRB G1103KPPB3 S1103K (T-21548P) 1.09
1
TCJT 1 ⁄4 S — G1103KPPB4 S1103K3
RCJT,TCJT 30 GE30KRRB GE30KPPB3 SE30K
1 (1)
RCJT,TCJT 1 ⁄4 G1104KRRB G1104KPPB2 S1104K
5 1 1 5 33 15 (1)
RCJT,TCJT 1 ⁄16 6 ⁄8 5 ⁄8 3 ⁄8 1.254 ⁄64 2.106 ⁄32 2.112 G1105KRRB G1105KPPB2 S1105K T-40223 3.18
3 (1)
RCJT,TCJT 1 ⁄8 155.6 130.2 92.1 31.8 13.1 53.5 11.9 53.6 G1106KRRB G1106KPPB2 S1106K (T-21414) 1.444
7 (1)
RCJT,TCJT 1 ⁄16 G1107KRRB G1107KPPB2 S1107K
RCJT,TCJT 35 GE35KRRB GE35KPPB2 SE35K
1 3 21 1 33 1
RCJT,TCJT 1 ⁄2 6 ⁄4 5 ⁄32 4 ⁄8 1.500 ⁄64 2.334 ⁄2 2.292 G1108KRRB G1108KPPB3 S1108KT T-40224 4.83
9
RCJT,TCJT 1 ⁄16 171.4 143.6 104.7 38.1 13.1 59.3 12.7 58.2 — G1109KPPB3 S1109KT (T-22529) 2.193
RCJT,TCJT 40 GE40KRRB GE40KPPB3 SE40K
5
RCJT,TCJT 1 ⁄8 G1110KRRB G1110KPPB4 S1110K
1 27 3 33 1
7 ⁄16 ⁄32 4 ⁄8 ⁄64 ⁄2
11
RCJT,TCJT 1 ⁄16 5 1.531 2.334 2.480 G1111KRRB G1111KPPB4 S1111K T-40225 5.24
3
RCJT,TCJT 1 ⁄4 179.4 148 111.1 38.9 13.1 59.3 12.7 63.0 G1112KRRB G1112KPPB4 S1112K (T-21416) 2.379
RCJT,TCJT 45 GE45KRRB GE45KPPB4 SE45K
7 7 3 9 43 1
RCJT,TCJT 1 ⁄8 7 ⁄16 6 ⁄16 4 ⁄16 1.688 ⁄64 2.615 ⁄2 2.730 G1114KRRB G1114KPPB3 S1114K T-40226 6
15
RCJT,TCJT 1 ⁄16 188.9 157.2 115.9 42.9 17.1 66.4 12.7 69.3 G1115KRRB G1115KPPB3 S1115K (T-21418) 2.724
RCJT,TCJT 50 GE50KRRB GE50KPPB3 SE50K
229
Concentric Collar
The Fafnir RCJTC flange cartridges are basically the same design as
the RCJT series except they use the concentric collar rather than the
self-locking eccentric collar as the shaft locking device. All RCJTC
H J d1
units are equipped with GC-KRRB wide inner ring, concentric collar
bearings. The spherical outside diameter of these bearings mounted
in corresponding machined housing seats provides the initial self-
alignment. Bolt hole spacing dimensions are interchangeable with
most competitive units as well as the Fafnir RCJT series.
These units are factory prelubricated, but a grease fitting is pro-
vided for relubrication if required. All units are supplied with concentric A1
collars. L A
Fafnir Safety End Caps available for selected sizes, see page 261. E
Bearing Data
3
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: RCJTC 1 /16"
Unit Shaft H J L A E N A1 d1 S1 Bearing Collar Housing Unit
Diam. ref. ±.010" ref. ±.015" max. ref. ±.005" ref. Number Number Number Wt.
in. in. in. in. in. in. in. in. in. in. new lbs
mm mm mm mm mm mm mm mm mm (old) kg
5 7 3 25 21 39
RCJTC ⁄8 3 ⁄8 3 2 ⁄8 0.929 1.287 ⁄64 ⁄64 1.329 ⁄64 GC1010KRRB C203 T-40270 0.81
98.4 76.2 60.3 23.6 32.7 9.9 8.3 33.8 15.5 (T-27181) 0.368
3 13 17 3 25 7 47
RCJTC ⁄4 4 ⁄32 3 ⁄32 2 ⁄8 1.094 1.502 ⁄64 ⁄16 1.485 ⁄64 GC1012KRRB C204 T-40271 1.2
111.9 89.7 60.3 27.8 38.2 9.9 11.1 37.7 18.7 (T-27183) 0.545
7 57 3 15 17 51
RCJTC 1 4 ⁄8 3 ⁄64 2 ⁄4 1.100 1.569 ⁄32 ⁄32 1.735 ⁄64 GC1100KRRB C205 T-40272 1.58
123.8 98.81 69.8 27.9 39.8 11.9 13.5 44.1 20.2 (T-27200) 0.717
1 9 19 3 29 17 57
RCJTC 1 ⁄8 5 ⁄16 4 ⁄32 3 ⁄16 1.178 1.693 ⁄64 ⁄32 2.058 ⁄64 GC1102KRRB C206 T-401273 2.28
3
RCJTC 1 ⁄16 141.3 116.7 81 29.9 43.0 11.5 13.5 52.3 22.6 GC1103KRRB (T-27197) 1.035
1
RCJTC 1 ⁄4 S GC1103KRRB3
1 1 1 5 33 9
RCJTC 1 ⁄4 6 ⁄8 5 ⁄8 3 ⁄8 1.254 1.834 ⁄64 ⁄16 2.292 1 GC1104KRRB C207 T-40252 3.30
3
RCJTC 1 ⁄8 155.6 130.2 92.1 31.8 46.6 13.1 14.3 58.2 25.4 GC1106KRRB 1.498
7
RCJTC 1 ⁄16 GC1107KRRB
11 1 27 3 33 9 5
RCJTC 1 ⁄16 7 ⁄16 5 ⁄32 4 ⁄8 1.531 2.116 ⁄64 ⁄16 2.871 1 ⁄32 GC1111KRRB C209 T-40275 4.62
179.4 148.4 111.1 38.9 53.7 13.1 14.3 72.9 29.4 2.097
15 7 3 9 43 9 3
RCJTC 1 ⁄16 7 ⁄16 6 ⁄16 4 ⁄16 1.688 2.303 ⁄64 ⁄16 3.121 1 ⁄16 GC1115KRRB C210 T-40276 5.50
188.9 157.2 115.9 42.9 58.5 17.1 14.3 79.3 30.2 2.497
230
The Fafnir VCJT flange cartridges are basically the same in design and
outstanding features as the VCJ types except that they have two bolt
holes instead of four. This allows for mounting in restricted areas. The
units are assembled with GRA-RRB bearings with positive contact land-
riding seals, and self locking collars. These units are factory prelubri- B1
H J d1
cated, but a grease fitting is provided for relubrication if required.
Fafnir Safety End Caps available for selected sizes, see page 261.
Bearing Data
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: VCJT 1"; POPULAR SIZES IN BOLD.
in. in. in. in. in. in. in. in. in. in. in. new lbs
mm mm mm mm mm mm mm mm mm mm mm (old) kg
1 7 1 27 1 13 7
VCJT ⁄2 3 ⁄8 3 2 ⁄8 0.929 1.548 ⁄64 1 ⁄8 ⁄32 1.105 ⁄8 GRA008RRB S1008K T-40219 1.3
5
VCJT ⁄8 98.4 76.2 53.9 23.6 39.3 10.7 28.6 10.3 28.1 22.2 GRA010RRB S1010K (T-22244P) 0.59
VCJT 17 GRAE17RRB SE17K
3 13 17 3 25 7 7 59
VCJT ⁄4 4 ⁄32 3 ⁄32 2 ⁄8 1.094 1.706 ⁄64 1 ⁄32 ⁄16 1.292 ⁄64 GRA012RRB S1012K T-40220 1.44
VCJT 20 111.9 89.7 60.3 27.8 43.3 9.9 31 11.1 32.8 23.4 GRAE20RRB SE20K (T-21409P) 0.518
7
VCJT ⁄8 GRA014RRB S1014K
15 7 29 3 29 7 7 59
VCJT 16⁄ 4 ⁄8 3 ⁄32 2 ⁄4 1.100 1.701 ⁄64 1 ⁄32 ⁄16 1.480 ⁄64 GRA015RRB S1015K T-40221 1.63
VCJT 1 123.8 99.2 69.8 27.9 43.2 11.5 31 11.1 23.9 23.4 GRA100RRB S1100K (T-21412P) 0.74
VCJT 25 GRAE25RRB SE25K
1
VCJT 1 ⁄8 GRA102RRB S1102K
9 19 1 29 13 15 1
5 ⁄16 4 ⁄32 3 ⁄8 ⁄64 1 ⁄32 ⁄32 1 ⁄16
3
VCJT 1 ⁄16 1.178 1.856 1.730 GRA103RRB S1103K T-40222 2.26
1
VCJT 1 ⁄4 S 141.3 116.7 79.4 29.9 47.1 11.5 35.7 11.9 43.7 27 GRA103RRB2 S1103K3 (T-21548P) 1.026
VCJT 30 GRAE30RRB SE30K
1
VCJT 1 ⁄4 GRA104RRB S1104K
3 1 1 5 33 17 15 5
VCJT 1 ⁄8 6 ⁄8 5 ⁄8 3 ⁄8 1.254 1.989 ⁄64 1 ⁄32 ⁄32 2.112 1 ⁄32 GRA106RRB S1106K T-40223 3
7
VCJT 1 ⁄16 155.6 130.2 92.1 31.8 50.5 13.1 38.9 11.9 53.6 29.4 GRA107RRB S1107K (T-21414) 1.362
VCJT 35 GRAE35RRB SE35K
3 21 1 33 23 1 9
6 ⁄4 5 ⁄32 4 ⁄8 ⁄64 1 ⁄32 ⁄2 1 ⁄32
1
VCJT 1 ⁄2 1.500 2.243 2.292 GRA108RRB S1108KT T-40224 4.57
VCJT 40 171.4 143.6 104.7 38.1 56.9 13.1 43.7 12.7 58.2 32.5 GRAE40RRB SE40K (T-22529) 2.075
5
VCJT 1 ⁄8 GRA110RRB S1110K
1 27 3 33 23 1 9
7 ⁄16 5 ⁄32 4 ⁄8 ⁄64 1 ⁄32 ⁄2 1 ⁄32
11
VCJT 1 ⁄16 1.531 2.244 2.480 GRA111RRB S1111K T-40225 4.91
3
VCJT 1 ⁄4 179.4 148.0 111.1 38.9 57.0 13.1 43.7 12.7 63.0 32.5 GRA112RRB S1112K (T-21416) 2.229
VCJT 45 GRAE45RRB SE45K
7
VCJT 1 ⁄8 GRA114RRB S1114K
15 7 3 9 43 23 1 9
VCJT 1 ⁄16 7 ⁄16 6 ⁄16 4 ⁄16 1.688 2.400 ⁄64 1 ⁄32 ⁄2 2.730 1 ⁄32 GRA115RRB S1115K T-40226 5.49
VCJT 2S 188.9 157.2 115.8 42.9 61.0 17.1 43.7 12.7 69.3 32.5 GRA115RRB2 S1115K2 (T-21418) 2.492
VCJT 50 GRAE50RRB SE50K
1 1 43 29 21 7
VCJT 2 8 ⁄2 7 ⁄4 5 1.844 2.672 ⁄64 1 ⁄32 ⁄32 2.980 2. ⁄16 GRA200RRB S1200K T-40227 6.81
3
VCJT 2 ⁄16 215.9 184.1 127 46.8 67.9 17.1 48.4 16.7 75.7 36.5 GRA203RRB S1203K (T-23788) 3.092
VCJT 55 GRAE55RRB SE55K
231
YCJT Industrial G
HOLE
BOLT SIZE
S1
Setscrew Series
The Fafnir YCJT flange cartridges are basically the same design as
the YCJ series but are mounted with two bolts instead of four. All
YCJT units are equipped with GY-KRRB wide inner ring, setscrew
B
bearings. The spherical outside diameter of these bearings mounted H J F
in corresponding machined housing seats provides the initial self-
alignment.
These units are factory prelubricated, but a grease fitting is
provided for relubrication if required.
Fafnir Safety End Caps available for selected sizes, see page 261.
A1
Bearing Data A
Unit Bearing Number Dimensions and Load Ratings L E
YCJT GY-KRRB Page 191
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: YCJT 1 7⁄16"; POPULAR SIZES IN BOLD.
in. in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm mm
1 7 1 5 7 5 27
YCJT ⁄2 3 ⁄8 3 2 ⁄8 0.929 1.296 1 ⁄64 ⁄16 0.941 ⁄8 ⁄64 GY1008KRRB
5
YCJT ⁄8 98.4 76.2 54.0 23.6 32.9 27.4 11.1 23.9 15.9 10 GY1010KRRB
YCJT 17 GYE17KRRB
13 17 3 7 7 23 27
4 ⁄32 3 ⁄32 2 ⁄8 1 ⁄32 ⁄16 ⁄32 ⁄64
3
YCJT ⁄4 1.094 1.484 1.085 GY1012KRRB
YCJT 20 111.9 89.7 60.3 27.8 37.7 30.9 11.1 27.6 18.3 10 GYE20KRRB
7
YCJT ⁄8 GY1014KRRB
15 7 29 3 11 7 25 29
YCJT 16⁄ 4 ⁄8 3 ⁄32 2 ⁄4 1.100 1.546 1 ⁄32 ⁄16 1.331 ⁄32 ⁄64 GY1015KRRB
YCJT 1 123.8 99.2 69.9 27.9 39.3 34.1 11.1 33.8 19.8 11.5 GY1100KRRB
YCJT 25 GYE25KRRB
1
YCJT 1 ⁄8 GY1102KRRB
9 19 1 1 15 7 29
5 ⁄16 4 ⁄32 3 ⁄8 1 ⁄2 ⁄32 ⁄8 ⁄64
3
YCJT 1 ⁄16 1.178 1.671 1.587 GY1103KRRB
1
YCJT 1 ⁄4 S 141.3 116.7 79.45 29.9 42.4 38.1 11.9 40.3 22.2 11.5 GY1103KRRB3
YCJT 30 GYE30KRRB
1
YCJT 1 ⁄4 GY1104KRRB
3 1 1 5 11 15 33
YCJT 1 ⁄8 6 ⁄8 5 ⁄8 3 ⁄8 1.254 1.827 1 ⁄16 ⁄32 1.843 1 ⁄64 GY1106KRRB
7
YCJT 1 ⁄16 155.6 130.2 92.1 31.8 46.4 42.9 11.9 46.8 25.4 13 GY1107KRRB
YCJT 35 GYE35KRRB
3 21 1 15 1 3 33
6 ⁄4 5 ⁄32 4 ⁄8 1 ⁄16 ⁄2 1 ⁄16 ⁄64
1
YCJT 1 ⁄2 1.500 2.141 2.057 GY1108KRRB
YCJT 40 171.5 143.7 104.8 38.1 54.4 49.2 12.7 52.2 30.2 13 GYE40KRRB
5
YCJT 1 ⁄8 GY1110KRRB
1 27 3 15 1 3 33
7 ⁄16 5 ⁄32 4 ⁄8 1 ⁄16 ⁄2 1 ⁄16 ⁄64
11
YCJT 1 ⁄16 1.531 2.14 2.279 GY1111KRRB
3
YCJT 1 ⁄4 179.4 148.4 111.1 38.9 54.4 49.2 12.7 57.9 30.2 13 GY1112KRRB
YCJT 45 GYE45KRRB
15 7 3 9 1 1 9 43
YCJT 1 ⁄16 7 ⁄16 6 ⁄16 4 ⁄16 1.688 2.390 2 ⁄32 ⁄2 2.473 1 ⁄32 ⁄64 GY1115KRRB
YCJT 2S 188.9 157.2 115.9 42.9 60.7 51.6 12.7 62.8 32.5 17 GY1115KRRB2
YCJT 50 GYE50KRRB
1 1 3 21 15 43
YCJT 2 8 ⁄2 7 ⁄4 5 1.844 2.547 2 ⁄16 ⁄32 2.745 1 ⁄16 ⁄64 GY1200KRRB
3
YCJT 2 ⁄16 215.9 184.2 127 46.8 64.7 55.6 16.7 69.7 33.3 17 GY1203KRRB
YCJT 55 GYE55KRRB
232
The Fafnir SCJT flange cartridges are basically the same in design and
construction features as the SCJ types, but have only two bolt holes
(instead of four) for mounting in restricted areas. The units are as-
sembled with GYA-RRB bearings with positive contact land-riding seals,
and setscrew locking. These units are factory prelubricated, but a grease B
fitting is provided for relubrication if required. H J F
Fafnir Safety End Caps available for selected sizes, see page 261.
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: SCJT 1"; POPULAR SIZES IN BOLD. 1
Unit Shaft H J L A E N B A1 F S1 Bearing Housing Unit
Diam. Number Number Wt.
in. in. in. in. in. in. in. in. in. in. in. lbs
mm mm mm mm mm mm mm mm mm mm mm kg
1 7 3 45 25 15 7 31 5
SCJT ⁄2 3 ⁄8 3 2 ⁄8 ⁄64 1 ⁄64 ⁄16 ⁄16 ⁄32 ⁄8 GYA008RRB T-40136 0.75
5
SCJT ⁄8 98.4 76.2 60.3 17.9 25.4 9.9 23.8 11.1 24.6 15.9 GYA010RRB 0.34
SCJT 17 GYAE17RRB
3 13 17 9 3 1 25 1 7 9 23
SCJT ⁄4 4 ⁄32 3 ⁄32 2 ⁄16 ⁄4 1 ⁄8 ⁄64 1 ⁄16 ⁄16 1 ⁄64 ⁄32 GYA012RRB T-40138 0.94
SCJT 20 111.9 89.69 65.1 19 28.6 9.9 27 11.1 29 18.3 GYAE20RRB 0.43
7
SCJT 8 ⁄ GYA014RRB
15 7 57 3 25 11 15 7 7 21 49
SCJT 16 ⁄ 4 ⁄8 3 ⁄64 2 ⁄4 ⁄32 1 ⁄64 ⁄32 1 ⁄64 ⁄16 1 ⁄64 ⁄64 GYA015RRB T-40140 1.07
SCJT 1 123.8 98.82 69.9 19.8 29.8 11.9 28.2 11.1 33.7 19.4 GYA100RRB 0.48
SCJT 25 GYAE25RRB
1
SCJT 1 ⁄8 GYA102RRB
9 19 1 27 11 29 9 17 37 29
5 ⁄16 4 ⁄32 3 ⁄8 ⁄32 1 ⁄32 ⁄64 1 ⁄32 ⁄32 1 ⁄64 ⁄32
3
SCJT 1 ⁄16 GYA103RRB T-40142 1.58
1
SCJT 1 ⁄4 S 141.3 116.68 79.4 21.4 34.1 11.5 32.5 13.5 40.1 23 GYA103RRB3 0.72
SCJT 30 GYAE30RRB
1
SCJT 1 ⁄4 GYA104RRB
3 1 1 5 31 1 33 7 9 27 1
SCJT 1 ⁄8 6 ⁄8 5 ⁄8 3 ⁄8 ⁄32 1 ⁄2 ⁄64 1 ⁄16 ⁄16 1 ⁄32 1 ⁄64 GYA106RRB T-40144 2.37
7
SCJT 1 ⁄16 155.6 130.18 92.1 24.6 38.1 13.1 36.5 14.3 46.8 25.8 GYA107RRB 1.08
SCJT 35 GYAE35RRB
3 21 1 1 39 33 35 9 1 3
6 ⁄4 5 ⁄32 4 ⁄8 1 ⁄32 1 ⁄64 ⁄64 1 ⁄64 ⁄16 2 ⁄16 1 ⁄32
1
SCJT 1 ⁄2 GYA108RRB T-40146 4.34
SCJT 40 171.5 143.67 104.8 26.2 40.9 13.1 39.3 14.3 52.4 27.8 GYAE40RRB 1.97
5
SCJT 1 ⁄8 GYA110RRB
1 27 3 1 23 33 21 5 5 7
7 ⁄16 5 ⁄32 4 ⁄8 1 ⁄8 1 ⁄32 ⁄64 1 ⁄32 ⁄8 2 ⁄32 1 ⁄8
11
SCJT 1 ⁄16 GYA111RRB T-40170 4.48
3
SCJT 1 ⁄4 179.4 148.0 111.1 28.6 43.6 13.1 42.1 15.8 57.9 28.6 GYA112RRB 2.03
SCJT 45 GYAE45RRB
1 3 9 1 13 43 3 21 15 7
7 ⁄16 6 ⁄16 4 ⁄16 1 ⁄8 ⁄16 ⁄64 1 ⁄4 ⁄32 2 ⁄32 1 ⁄32
15
SCJT 1 ⁄16 1 GYA115RRB T-40172 4.98
SCJT 2S 179.4 157.16 115.8 28.6 46 17.1 44.4 16.6 62.7 30.9 GYA115RRB2 2.26
SCJT 50 GYAE50RRB
1 1 7 57 43 53 23 3 1
SCJT 2 8 ⁄2 7 ⁄4 5 1 ⁄32 1 ⁄64 ⁄64 1 ⁄64 ⁄32 2 ⁄4 1 ⁄4 GYA200RRB T-40174 6.14
3
SCJT 2 ⁄16 215.9 184.15 127 30.9 48 17.1 46.4 18.2 69.8 31.7 GYA203RRB 2.79
SCJT 55 GYAE55RRB
233
FA
popular light duty Pressed-Steel Flangette Unit.
FLCT
FNIR
H J d1 M
FLCT flange cartridges are equipped with RA-RRB extended inner
ring ball bearings with positive contact land-riding seals. These
bearings are permanently prelubricated and positively protected
against contaminants. The Fafnir invented self-locking collar
completes the assembly.
3
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: FLCT 1 ⁄16"
Unit Shaft H J L E A A3 N1 sq. Bolt d1 M Bearing Collar Housing Unit
Diam. Diam. Number Number Number Wt.
in. in. in. in. in. in. in. in. in. in. in. lbs
mm mm mm mm mm mm mm mm mm mm mm kg
1 3 1 5 3 37 9 9 1 1 1
FLCT ⁄2 3 ⁄16 2 ⁄2 2 ⁄16 1 ⁄16 ⁄64 ⁄32 ⁄32 ⁄4 1 ⁄8 1 ⁄2 RA008RRB S1008K T-34124 0.71
5
FLCT ⁄8 81 63.5 58.7 30.2 14.7 7.1 7.1 6.4 28.6 38.1 RA010RRB S1010K 0.322
FLCT 17 RAE17RRB SE17K
3 9 13 5 19 43 11 11 5 5 25
FLCT ⁄4 3 ⁄16 2 ⁄16 2 ⁄8 1 ⁄64 ⁄64 ⁄32 ⁄32 ⁄16 1 ⁄16 1 ⁄32 RA012RRB S1012K T-34122 0.98
FLCT 20 90.5 71.4 66.7 32.9 17.1 8.7 8.7 7.9 33.3 45.2 RAE20RRB SE20K 0.445
7
FLCT 8 ⁄ RA014RRB S1014K
15 3 51 23 11 11 11 5 1 63
FLCT 16 ⁄ 3 ⁄4 3 2 ⁄64 1 ⁄64 ⁄16 ⁄32 ⁄32 ⁄16 1 ⁄2 1 ⁄64 RA015RRB S1015K T-33753 1.1
FLCT 1 95.2 76.2 71 34.5 17.5 8.7 8.7 7.9 38.1 50.4 RA100RRB S1100K 0.499
FLCT 25 RAE25RRB SE25K
1
FLCT 1 ⁄8 RA102RRB S1102K
3 7 9 5 33 13 13 13 3 3 11
FLCT 1 ⁄16 4 ⁄16 3 ⁄16 3 ⁄16 1 ⁄64 ⁄16 ⁄32 ⁄32 ⁄8 1 ⁄4 2 ⁄32 RA103RRB S1103K T-34120 1.84
1
FLCT 1 ⁄4 S 112.7 90.5 84.1 38.5 20.6 10.3 10.3 9.5 44.4 59.5 RA103RRB2 S1103K3 0.835
FLCT 30 RAE30RRB SE30K
1
FLCT 1 ⁄4 RA104RRB S1104K
3 15 15 11 21 7 7 13 3 1 47
FLCT 1 ⁄8 4 ⁄16 3 ⁄16 3 ⁄16 1 ⁄32 ⁄8 ⁄16 ⁄32 ⁄8 2 ⁄8 2 ⁄64 RA106RRB S1106K T-34118 2.37
7
FLCT 1 ⁄16 125.4 100 93.7 41.1 22.2 11.1 10.3 9.5 54 69.5 RA107RRB S1107K 1.075
FLCT 35 RAE35RRB SE35K
234
J E
G
Bearing Data A3
E1
Unit Bearing Number Dimensions and Load Ratings
A
RFC GC-KRRB Page 190
1
1
Recommended shaft tolerances: ⁄2"-1 15⁄16", nominal to -.0005", -.013mm;
2"-2 3⁄16", nominal to -.0010", -.025mm.
7
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: RFC 1 ⁄16"
Unit Shaft D J H S1 K N G A E1 A3 E A1 d1 Bearing Collar Housing Unit
Diam. Number Number Number Wt.
in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs
mm mm mm mm mm mm mm mm mm mm mm mm mm kg
5 3 51 9 13 31 7 3 1 15 3 3
RFC 1 3 3 ⁄8 4 ⁄8 ⁄64 ⁄64 ⁄32 1 ⁄64 1 ⁄64 ⁄8 ⁄4 1 ⁄64 ⁄8 1 ⁄4 GC1100KRRB C205 T-27031 2.54
76.2 92.1 111.1 20.2 3.6 10.3 37.7 28.2 9.5 6.4 31.4 9.5 44.4 1.152
1 1 57 9 15 39 13 13 27 3 3 1
RFC 1 ⁄8 3.375 4 ⁄8 5 ⁄64 ⁄64 ⁄32 1 ⁄64 1 ⁄64 ⁄32 ⁄64 1 ⁄16 ⁄8 2 ⁄16 GC1102KRRB C206 T-27021 3.84
3
RFC 1 ⁄16 85.72 104.8 127 22.6 3.6 11.9 40.9 30.6 10.3 10.7 30.2 9.5 52.4 GC1103KRRB 1.742
1
RFC 1 ⁄4 S GC1103KRRB3
1 3 1 1 15 3 11 13 15 9 1 11
RFC 1 ⁄4 3.625 4 ⁄8 5 ⁄4 1 ⁄8 ⁄32 1 ⁄4 1 ⁄32 ⁄32 ⁄32 1 ⁄32 ⁄2 2 ⁄32 GC1104KRRB C207 T-26730 4.11
3
RFC 1 ⁄8 92.08 111.1 133.4 25.4 3.2 11.9 44.4 34.1 10.3 11.9 32.5 12.7 59.5 GC1106KRRB 1.864
7
RFC 1 ⁄16 GC1107KRRB
1 3 1 5 3 15 59 1 27 15 29 11
RFC 1 ⁄2 3.625 4 ⁄8 5 ⁄4 1 ⁄64 ⁄16 ⁄32 1 ⁄64 1 ⁄2 ⁄64 ⁄32 1 ⁄64 12 2 ⁄16 GC1108KRRB C208 T-26587 4.72
92.08 111.1 133.4 27.4 4.8 11.9 48.8 38.1 10.7 11.9 36.9 12.7 68.3 2.141
11 1 1 5 17 27 11 1 15 3 29 7
RFC 1 ⁄16 4.25 5 ⁄8 6 ⁄8 1 ⁄32 — ⁄32 1 ⁄32 1 ⁄32 ⁄2 ⁄32 1 ⁄8 ⁄64 2 ⁄8 GC1111KRRB C209 T-27276 6.21
3
RFC 1 ⁄4 107.95 130.2 155.6 29.4 — 13.5 46.8 34.1 12.7 11.9 34.9 11.5 73 GC1112KRRB 2.817
15 3 3 3 1 17 5 11 15 5 17 1 1
RFC 1 ⁄16 4.5 5 ⁄8 6 ⁄8 1 ⁄16 ⁄4 ⁄32 2 ⁄32 1 ⁄16 ⁄32 ⁄8 1 ⁄32 ⁄2 3 ⁄8 GC1115KRRB C210 T-26743 7.08
114.3 136.5 161.9 30.2 6.4 13.5 54.8 42.9 11.9 15.9 38.9 12.7 79.4 3.211
1 5 9 19 13 3 21 7 17 1 1
RFC 2 5 6 7 ⁄8 1 ⁄16 ⁄32 ⁄32 2 ⁄32 1 ⁄4 ⁄32 ⁄8 1 ⁄32 ⁄2 3 ⁄2 GC1200KRRB C211 T-28287 9
3
RFC 2 ⁄16 127 152.4 181 33.3 7.1 15.1 61.1 44.4 16.7 22.2 38.9 12.7 88.9 GC1203KRRB 4.082
235
H E
A H E1 A3
J
J A1
L1
50°
25°
H1
45°
30°
H2
MINIMUM
d1 d1 FRAME
OPENING
30° 30°
in. in. in. in. in. in. in. in. in. in. in. in. in. lbs
mm mm mm mm mm mm mm mm mm mm mm mm mm kg
(1)
RELUBRICATABLE SERIES
1 19 3 3 1 9 7 1 11 7 5 3 1
GVFD GVFDR ⁄2 1 ⁄32 2 ⁄32 3 ⁄16 2 ⁄2 ⁄32 1 ⁄8 1 ⁄4 ⁄16 ⁄8 ⁄16 ⁄8 1 ⁄8 GRA008RRB S1008K 0.58
5
GVFD GVFDR ⁄8 40.5 53.2 81 63.5 7.1 47.6 31.8 17.5 22.2 7.9 9.5 28.6 GRA010RRB S1010K 2.63
GVFD GVFDR 17 GRAE17RRB SE17K
3 25 3 9 13 11 5 11 25 59 23 27 5
GVFD GVFDR ⁄4 1 ⁄32 2 ⁄8 3 ⁄16 2 ⁄16 ⁄32 2 ⁄32 1 ⁄32 ⁄32 ⁄64 ⁄64 ⁄64 1 ⁄16 GRA012RRB S1012K 0.74
GVFD GVFDR 20 45.2 60.3 90.5 71.4 8.7 54.8 34.1 19.8 23.4 9.1 10.7 33.3 GRAE20RRB SE20K 0.336
7
GVFD GVFDR 8 ⁄ GRA014RRB S1014K
15 7 5 3 11 3 11 25 59 23 27 1
GVFD GVFDR 16 ⁄ 1 ⁄8 2 ⁄8 3 ⁄4 3 ⁄32 2 ⁄8 1 ⁄32 ⁄32 ⁄64 ⁄64 ⁄64 1 ⁄2 GRA015RRB S1015K 0.85
GVFD GVFDR 1 47.6 66.7 95.2 76.2 8.7 60.3 34.1 19.8 23.4 9.1 10.7 38.1 GRA100RRB S1100K 0.386
GVFD GVFDR 25 GRAE25RRB SE25K
1
GVFD GVFDR 1 ⁄8 GRA102RRB S1102K
3 7 3 7 9 13 13 17 7 3 27 15 3
GVFD GVFDR 1 ⁄16 2 ⁄32 3 ⁄32 4 ⁄16 3 ⁄16 ⁄32 2 ⁄16 1 ⁄32 ⁄8 1 ⁄64 ⁄64 ⁄32 1 ⁄4 GRA103RRB S1103K 1.34
1
GVFD GVFDR 1 ⁄4 S 56.4 78.6 112.7 90.5 10.3 71.4 38.9 22.2 26.6 10.7 11.9 44.5 GRA103RRB2 S1103K3 0.608
GVFD GVFDR 30 GRAE30RRB SE30K
1
GVFD GVFDR 1 ⁄4 GRA104RRB S1104K 1.81
3 13 1 13 15 13 7 21 15 5 7 1 1
GVFD GVFDR 1 ⁄8 2 ⁄32 3 ⁄2 4 ⁄16 3 ⁄16 ⁄32 3 ⁄32 1 ⁄32 ⁄16 1 ⁄32 ⁄16 ⁄2 2 ⁄8 GRA106RRB S1106K 0.821
7
GVFD GVFDR 1 ⁄16 61.1 88.9 122.2 100 10.3 81.8 42.1 23.8 29.4 11.1 12.7 54 GRA107RRB S1107
GVFD GVFDR 35 GRAE35RRB SE35K
1 29 7 13 11 17 17 29 1 9 1 5 3
GVFD GVFDR 1 ⁄2 2 ⁄32 3 ⁄8 5 ⁄16 4 ⁄16 ⁄32 3 ⁄32 1 ⁄32 1 ⁄8 1 ⁄32 ⁄2 ⁄8 2 ⁄8 GRA108RRB S1108KT 2.94
GVFD GVFDR 40 73.8 98.4 147.6 119.1 13.5 89.7 48.4 28.6 32.5 12.7 15.9 60.3 GRAE40RRB SE40K 1.334
5
GVFD GVFDR 1 ⁄8 GRA110RRB S1110K
11 15 7 7 3 17 25 29 1 9 1 5 1
GVFD GVFDR 1 ⁄16 2 ⁄16 4 ⁄32 5 ⁄8 4 ⁄4 ⁄32 3 ⁄32 1 ⁄32 1 ⁄8 1 ⁄32 ⁄2 ⁄8 2 ⁄2 GRA111RRB S1111K 3
3
GVFD GVFDR 1 ⁄4 74.6 107.2 149.2 120.6 13.5 96 48.4 28.6 32.5 12.7 15.9 63.5 GRA112RRB S1112K 1.361
GVFD GVFDR 45 GRAE45RRB SE45K
7 1 15 1 17 31 29 1 9 1 5 3
GVFD GVFDR 1 ⁄8 3 ⁄16 4 ⁄32 6 ⁄8 5 ⁄32 3 ⁄32 1 ⁄32 1 ⁄8 1 ⁄32 ⁄2 ⁄8 2 ⁄4 GRA114RRB S1114K 3.2
15
GVFD GVFDR 1 ⁄16 77.8 113.5 155.6 127 13.5 100.8 48.4 28.6 32.5 12.7 15.9 69.8 GRA115RRB S1115K 1.451
GVFD GVFDR 50 GRAE50RRB SE50K
(1) 1
All units have a ⁄4-28 grease fitting except as noted.
: 10-32 grease fitting
236
Bearing Data
H
J B1 H E1 A3
L1 A J
50°
25°
H1
45°
30°
H2
d1
H3
MINIMUM
FRAME
OPENING
d1 MINIMUM
FRAME
OPENING
1
30° 30°
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm kg
(1)
RELUBRICATABLE SERIES
1
GRFD GRFDR ⁄2 G1008KRRB S1008K
5 19 3 3 1 9 7 15 11 59 5 3 1 5 11
GRFD GRFDR ⁄8 1 ⁄32 2 ⁄32 3 ⁄16 2 ⁄2 ⁄32 1 ⁄8 1 ⁄32 ⁄16 ⁄64 ⁄16 ⁄8 1 ⁄8 1 ⁄32 ⁄64 G1010KRRB S1010K 0.57
11
GRFD GRFDR ⁄
16 40.5 53.2 81 63.5 7.1 47.6 37.3 17.5 23.4 7.9 9.5 28.6 29.4 4.4 G1011KRRB S1011K 0.259
GRFD GRFDR 17 GE17KRRB SE17K
3 25 3 9 13 11 5 23 25 3 23 27 5 11 1
GRFD GRFDR ⁄4 1 ⁄32 2 ⁄8 3 ⁄16 2 ⁄16 ⁄32 2 ⁄32 1 ⁄32 ⁄32 1 ⁄64 ⁄64 ⁄64 1 ⁄16 1 ⁄32 ⁄4 G1012KRRB S1012K 0.87
GRFD GRFDR 20 45.2 60.3 90.5 71.4 8.7 54.8 43.7 19.8 26.6 9.1 10.7 33.3 34.1 6.4 GE20KRRB SE20K 0.395
7
GRFD GRFDR ⁄8 G1014KRRB S1014K
15 7 5 3 11 3 3 25 1 23 27 1 17 17
GRFD GRFDR 16⁄ 1 ⁄8 2 ⁄8 3 ⁄4 3 ⁄32 2 ⁄8 1 ⁄4 ⁄32 1 ⁄16 ⁄64 ⁄64 1 ⁄2 1 ⁄32 ⁄64 G1015KRRB S1015K 1.02
GRFD GRFDR 1 47.6 66.7 95.2 76.2 8.7 60.3 44.4 19.8 27 9.1 10.7 38.1 38.9 6.7 G1100KRRB S1100K 0.463
GRFD GRFDR 25 GE25KRRB SE25K
1
GRFD GRFDR 1 ⁄16 G1101KRRB S1101K
1 7 3 7 9 13 13 29 7 3 27 15 3 13 1
GRFD GRFDR 1 ⁄8 2 ⁄32 3 ⁄32 4 ⁄16 3 ⁄16 ⁄32
2 ⁄16 1 ⁄32 ⁄8 1 ⁄16 ⁄64 ⁄32 1 ⁄4 1 ⁄16 ⁄4 G1102KRRB S1102K 1.38
3
GRFD GRFDR 1 ⁄16 56.4 78.6 112.7 90.5 10.3 71.4 48.4 22.2 30.2 10.7 11.9 44.5 46 6.4 G1103KRRB S1103K 6.26
1
GRFD GRFDR 1 ⁄4 S G1103KRRB3 S1103K3
GRFD GRFDR 30 GE30KRRB SE30K
1
GRFD GRFDR 1 ⁄4 G1104KRRB S1104K
5 13 1 13 15 13 7 1 15 9 7 1 1 3 1
GRFD GRFDR 1 ⁄16 2 ⁄32 3 ⁄2 4 ⁄16 3 ⁄16 ⁄32 3 ⁄32 2 ⁄64 ⁄16 1 ⁄32 ⁄16 ⁄2 2 ⁄8 2 ⁄32 ⁄4 G1105KRRB S1105K 1.89
3
GRFD GRFDR 1 ⁄8 61.1 88.9 122.2 100 10.3 81.8 51.2 23.8 32.5 11.1 12.7 54 53.2 6.4 G1106KRRB S1106K 0.857
7
GRFD GRFDR 1 ⁄16 G1107KRRB S1107K
GRFD GRFDR 35 GE35KRRB SE35K
1 29 7 13 11 17 17 7 1 3 1 5 3 11 7
GRFD GRFDR 1 ⁄2 2 ⁄32 3 ⁄8 5 ⁄16 4 ⁄16 ⁄32 3 ⁄32 2 ⁄32 1 ⁄8 1 ⁄8 ⁄2 ⁄8 2 ⁄8 2 ⁄32 ⁄32 G1108KRRB S1108KT 2.50
9
GRFD GRFDR 1 ⁄16 73.8 98.4 147.6 119.1 13.5 89.7 56.4 28.6 34.9 12.7 15.9 60.3 59.5 5.6 G1109KRRB S1109KT 1.138
GRFD GRFDR 40 GE40KRRB SE40K
5
GRFD GRFDR 1 ⁄8 G1110KRRB S1110K
11 15 7 7 3 17 25 7 1 3 1 5 1 9 7
GRFD GRFDR 1 ⁄16 2 ⁄16 4 ⁄32 5 ⁄8 4 ⁄4 ⁄32 3 ⁄32 2 ⁄32 1 ⁄8 1 ⁄8 ⁄2 ⁄8 2 ⁄2 2 ⁄16 ⁄32 G1111KRRB S1111K 3.28
3
GRFD GRFDR 1 ⁄4 74.6 107.2 149.2 120.6 13.5 96 56.4 28.6 34.9 12.7 15.9 63.5 65.1 5.6 G1112KRRB S1112K 1.488
GRFD GRFDR 45 GE45KRRB SE45K
7 1 15 1 17 31 15 1 1 1 5 3 3 11
GRFD GRFDR 1 ⁄8 3 ⁄16 4 ⁄32 6 ⁄8 5 ⁄32 3 ⁄32 2 ⁄32 1 ⁄8 1 ⁄2 ⁄2 ⁄8 2 ⁄4 2 ⁄4 ⁄32 G1114KRRB S1114K 3.73
15
GRFD GRFDR 1 ⁄16 77.8 113.5 155.6 127 13.5 100.8 62.7 28.6 38.1 12.7 15.9 69.8 69.8 8.7 G1115KRRB S1115K 1.692
GRFD GRFDR 50 GE50KRRB SE50K
(1) 1
All units have a ⁄4-28 grease fitting except as noted.
: 10-32 grease fitting
237
Bearing Data
L E
Unit Bearing Number Dimensions and Load Ratings A
H
J d1
GVFTD
E E1 A3
L A A1
L E1 A3
A1
25°
H2 37°
H MINIMUM H2
J d1 H
FRAME J MINIMUM
OPENING FRAME
OPENING
in. in. in. in. in. in. in. in. in. in. in. in. lbs
mm mm mm mm mm mm mm mm mm mm mm mm kg
(1)
RELUBRICATABLE SERIES
1 3 1 3 9 7 1 11 7 5 3 1
GVFTD GVFTDR ⁄2 3 ⁄16 2 ⁄2 2 ⁄32 ⁄32 1 ⁄8 1 ⁄4 ⁄16 ⁄8 ⁄16 ⁄8 1 ⁄8 GRA008RRB S1008K 0.54
5
GVFTD GVFTDR ⁄8 81 63.5 53.2 7.1 47.6 31.8 17.5 22.2 7.9 9.5 28.6 GRA010RRB S1010K 0.245
GVFTD GVFTDR 17 GRAE17RRB SE17K
3 9 13 3 11 5 11 25 59 23 27 5
GVFTD GVFTDR ⁄4 3 ⁄16 2 ⁄16 2 ⁄8 ⁄32 2 ⁄32 1 ⁄32 ⁄32 ⁄64 ⁄64 ⁄64 1 ⁄16 GRA012RRB S1012K 0.73
GVFTD GVFTDR 20 90.5 71.4 60.3 8.7 54.8 34.1 19.8 23.4 9.1 10.7 33.3 GRAE20RRB SE20K 0.331
7
GVFTD GVFTDR ⁄8 GRA014RRB S1014K
15 3 5 11 3 11 25 59 23 27 1
GVFTD GVFTDR 16⁄ 3 ⁄4 3 2 ⁄8 ⁄32 2 ⁄8 1 ⁄32 ⁄32 ⁄64 ⁄64 ⁄64 1 ⁄2 GRA015RRB S1015K 0.8
GVFTD GVFTDR 1 95.2 76.2 66.7 8.7 60.3 34.1 19.8 23.4 9.1 10.7 38.1 GRA100RRB S1100K 0.363
GVFTD GVFTDR 25 GRAE25RRB SE25K
1
GVFTD GVFTDR 1 ⁄8 GRA102RRB S1102K
3 7 9 3 13 13 17 7 3 27 15 3
GVFTD GVFTDR 1 ⁄16 4 ⁄16 3 ⁄16 3 ⁄32 ⁄32 2 ⁄16 1 ⁄32 ⁄8 1 ⁄64 ⁄64 ⁄32 1 ⁄4 GRA103RRB S1103K 1.34
1
GVFTD GVFTDR 1 ⁄4 S 112.7 90.5 78.6 10.3 71.4 38.9 22.2 26.6 10.7 11.9 44.5 GRA103RRB2 S1103K3 0.608
GVFTD GVFTDR 30 GRAE30RRB SE30K
1
GVFTD GVFTDR 1 ⁄4 GRA104RRB S1104K 1.9
3 13 15 1 13 7 21 15 5 7 1 1
GVFTD GVFTDR 1 ⁄8 4 ⁄16 3 ⁄16 3 ⁄2 ⁄32 3 ⁄32 1 ⁄32 ⁄16 1 ⁄32 ⁄16 ⁄2 2 ⁄8 GRA106RRB S1106K 0.862
7
GVFTD GVFTDR 1 ⁄16 122.2 100 88.9 10.3 81.8 42.1 23.8 29.4 11.1 12.7 54 GRA107RRB S1107K
GVFTD GVFTDR 35 GRAE35RRB SE35K
(1) 1
All units have a ⁄4-28 grease fitting.
238
Bearing Data
Relubricatable Series
L L E1 A3
B1
A
45°
50°
25°
37°
H3 H2
H H
J d1 MINIMUM J MINIMUM
FRAME
OPENING
FRAME
OPENING
1
N HOLE WIDTH SQ. N HOLE WIDTH SQ.
TOLERANCE ± .005 TOLERANCE ± .005
K
GRFTD GRFTDR A1
L Non-Relubricatable Series
E1 A3
E
A1
A K
H
J
H3 H2
d1 MINIMUM MINIMUM
FRAME FRAME
OPENING OPENING
RFTD RFTDR
in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs
mm mm mm mm mm mm mm mm mm mm mm mm mm mm kg
(1)
RELUBRICATABLE SERIES
1
GRFTD GRFTDR ⁄2 G1008KRRB S1008K
5 3 1 3 9 7 15 5 59 5 3 1 5 11
GRFTD GRFTDR ⁄8 3 ⁄16 2 ⁄2 2 ⁄32 ⁄32 1 ⁄8 1 ⁄32 ⁄8 ⁄64 ⁄16 ⁄8 1 ⁄8 1 ⁄32 ⁄64 G1010KRRB S1010K 0.56
11
GRFTD GRFTDR ⁄16 81 63.5 53.2 7.1 47.6 37.3 15.9 23.4 7.9 9.5 28.6 29.4 4.4 G1011KRRB S1011K 0.254
GRFTD GRFTDR 17 GE17KRRB SE17K
3 9 13 3 11 5 23 25 3 23 27 5 11 1
GRFTD GRFTDR ⁄4 3 ⁄16 2 ⁄16 2 ⁄8 ⁄32 2 ⁄32 1 ⁄32 ⁄32 1 ⁄64 ⁄64 ⁄64 1 ⁄16 1 ⁄32 ⁄4 G1012KRRB S1012K 0.85
GRFTD GRFTDR 20 90.5 71.4 60.3 8.7 54.8 43.7 19.8 26.6 9.1 10.7 33.3 34.1 6.4 GE20KRRB SE20K 0.386
7
GRFTD GRFTDR ⁄8 G1014KRRB S1014K
15 3 5 11 3 3 25 1 23 27 1 17 17
GRFTD GRFTDR 16⁄ 3 ⁄4 3 2 ⁄8 ⁄32 2 ⁄8 1 ⁄4 ⁄32 1 ⁄16 ⁄64 ⁄64 1 ⁄2 1 ⁄32 ⁄64 G1015KRRB S1015K 0.85
GRFTD GRFTDR 1 95.2 76.2 66.7 8.7 60.3 44.4 19.8 27 9.1 10.7 38.1 38.9 6.7 G1100KRRB S1100K 0.386
GRFTD GRFTDR 25 GE25KRRB SE25K
1
GRFTD GRFTDR 1 ⁄16 G1101KRRB S1101K
1 7 9 3 13 13 29 7 3 27 15 3 13 1
GRFTD GRFTDR 1 ⁄8 4 ⁄16 3 ⁄16 3 ⁄32 ⁄32 2 ⁄16 1 ⁄32 ⁄8 1 ⁄16 ⁄64 ⁄32 1 ⁄4 1 ⁄16 ⁄4 G1102KRRB S1102K 1.57
3
GRFTD GRFTDR 1 ⁄16 112.7 90.5 78.6 10.3 71.4 48.4 22.2 30.2 10.7 11.9 44.5 46 6.4 G1103KRRB S1103K 0.712
1
GRFTD GRFTDR 1 ⁄4 S G1103KRRB3 S1103K3
GRFTD GRFTDR 30 GE30KRRB SE30K
1
GRFTD GRFTDR 1 ⁄4 G1104KRRB S1104K
5 13 15 1 13 7 1 15 9 7 1 1 3 1
GRFTD GRFTDR 1 ⁄16 4 ⁄16 3 ⁄16 3 ⁄2 ⁄32 3 ⁄32 2 ⁄64 ⁄16 1 ⁄32 ⁄16 ⁄2 2 ⁄8 2 ⁄32 ⁄4 G1105KRRB S1105K 2.12
3
GRFTD GRFTDR 1 ⁄8 122.2 100 88.9 10.3 81.8 51.2 23.8 32.5 11.1 12.7 54 53.2 6.4 G1106KRRB S1106K 0.962
7
GRFTD GRFTDR 1 ⁄16 G1107KRRB S1107K
GRFTD GRFTDR 35 GE35KRRB SE35K
(1) 1
All units have a ⁄4-28 grease fitting.
239
RC Series
Fafnir RC series Cylindrical Cartridges are convienient units for
mounting in straight bore housings. They incorporate a wide inner
ring bearing with self-locking collar and spherical outside diameter S1
which is fitted to a corresponding spherical seat in the cartridge to D ±.001
provide self-alignment.
RC Cylindrical Cartridges are equipped with a G-KRRB (R-Seal)
wide inner ring ball bearing.
Recommended housing bore: Shaft Rotating - Nominal +.001" to +.003", +.025mm to +.076mm.
Shaft Stationary- Nominal +.000" to -.002", +.00mm to -.050mm.
Avoid excessive tightening of anchor bolts.
E1
1 15 A
Recommended shaft tolerances: ⁄2"-1 ⁄16", nominal to -.0005", -.013mm;
2"-3 15⁄16", nominal to -.0010", -.025mm.
Bearing Data
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: RC 1 3⁄16"; POPULAR SIZES IN BOLD.
Unit Shaft D A E1 S1 Bearing Collar Housing Unit Wt.
Diam. Number Number Number
RC 2 G1200KRRB S1200K
1 15 5 9 23
RC 2 ⁄8 4 ⁄16 2 ⁄16 ⁄16 1 ⁄32 G1202KRRB S1202K T-16804 6.97
3
RC 2 ⁄16 125.41 58.7 14.3 43.7 G1203KRRB S1203K 3.164
RC 55 GE55KRRB SE55K
7 7 9 9 27
RC 2 ⁄16 5 ⁄8 2 ⁄16 ⁄16 1 ⁄32 G1207KRRB S1207K T-17927 11.30
RC 60 149.23 65.1 14.3 46.8 GE60KRRB SE60K 5.13
1
All units have ⁄4"-28 grease fittings.
240
PBS Series J1 S1
O
The RA-RRB bearing used in the PBS pillow block has positive
contact land-riding seals with the improved shroud cap design and is
permanently prelubricated.
The base-to-center height and bolt spacing of PBS units make
them readily interchangeable with many standard pillow blocks on the
market. 1
Recommended shaft tolerances: nominal to -.0005", -.013mm.
Bearing Data
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm kg
1 3 5 5 7 11 1 1 7 9 9 9 13 13
PBS ⁄2 1 ⁄16 3 ⁄8 ⁄8 4 ⁄8 2 ⁄32 2 ⁄2 1 ⁄8 ⁄8 ⁄16 1 0.104 0.075 1 ⁄32 ⁄32 ⁄32 ⁄32 RA008RRB 40 600 0.75
5
PBS ⁄8 30.2 92.1 15.9 123.8 59.5 63.5 28.6 22.2 14.3 25.4 2.64 1.9 32.5 7.1 10.3 10.3 RA010RRB MST-(ZP) 2650 0.34
PBS 17 RAE17RRB
3 5 13 5 11 13 5 59 5 5 11 13 13
PBS ⁄4 1 ⁄16 3 ⁄16 ⁄8 5 2 ⁄16 2 ⁄16 1 ⁄16 ⁄64 ⁄8 1 0.119 0.083 1 ⁄16 ⁄32 ⁄32 ⁄32 RA012RRB 47 700 0.97
PBS 20 33.3 96.8 15.9 127 68.3 71.4 33.3 23.4 15.9 25.4 3.02 2.11 33.3 8.7 10.3 10.3 RAE20RRB MST-(ZP) 3100 0.44
7
PBS ⁄8 RA014RRB
15 7 3 13 1 27 1 59 11 11 11 7 7
PBS 16⁄ 1 ⁄16 3 ⁄4 ⁄16 5 ⁄4 2 ⁄32 3 1 ⁄2 ⁄64 ⁄16 1 0.134 0.083 1 ⁄32 ⁄32 ⁄16 ⁄16 RA015RRB 52 800 1.2
PBS 1 36.5 95.2 20.6 133.4 72.2 76.2 38.1 23.4 17.5 25.4 3.4 2.11 34.1 8.7 11.1 11.1 RA100RRB MST-(ZP) 3550 0.544
PBS 25 RAE25RRB
1
PBS 1 ⁄8 RA102RRB
3 11 11 7 1 11 9 3 3 11 3 15 13 9 9
PBS 1 ⁄16 1 ⁄16 4 ⁄16 ⁄8 6 ⁄4 3 ⁄32 3 ⁄16 1 ⁄4 1 ⁄64 ⁄16 1 ⁄16 0.134 0.104 1 ⁄32 ⁄32 ⁄16 ⁄16 RA103RRB 62 800 1.64
1
PBS 1 ⁄4S 42.9 119.1 22.2 158.8 84.9 90.5 44.4 26.6 17.5 30.2 3.4 2.64 37.3 10.3 14.3 14.3 RA103RRB2 MST-(ZP) 3550 0.744
PBS 30 RAE30RRB
1 7 7 1 23 15 1 5 7 3 13 13 9 9
PBS 1 ⁄4 1 ⁄8 5 ⁄8 6 ⁄2 3 ⁄32 3 ⁄16 2 ⁄8 1 ⁄32 ⁄8 1 ⁄8 0.149 0.104 1 ⁄16 ⁄32 ⁄16 ⁄16 RA104RRB 72 900 2.4
3
PBS 1 ⁄8 47.6 127 22.2 165.1 94.5 100 54 29.4 22.2 34.9 3.78 2.64 46 10.3 14.3 14.3 RA106RRB MST-(ZP) 4000 1.089
7
PBS 1 ⁄16 RA107RRB
PBS 35 RAE35RRB
(1) 1
Stamping thrust rating is ⁄5 of stamping radial load rating.
241
PB Series N
2 HOLES
O
RPB Series R
H2
A
The Fafnir PB pillow block is designed for extra light duty applications to d1
provide the advantages of ball bearings at low cost. The unit consists of a H
two piece separable zinc plated steel housing with spherical bearing seat.
This allows the spherically ground bearing initial self-alignment in all
H1
directions. J
The ball bearing is a RA-RRB extended inner ring type bearing and has L S T
positive contact land-riding seals and self-locking collar. It incorporates the PB Series
improved shroud cap design and is permanently prelubricated. TYP O
TYP
The RPB type pillow block has the same construction as the PB type, but 2
2 HOLES
has a thick, electrically conductive rubber interliner. Bearings in the RPB unit
are designated as RA-RRB FS-450 and have a special ball and race finish R
for exceptionally quiet operation. The bearing together with the rubber H2
A N d1
interliner comprise a RABR unit. Bearing is permanently prelubricated.
H
Recommended shaft tolerances: nominal to -.0005", -.013mm.
Bearing Data
H1
J min S1 T
Unit Bearing Number Dimensions and Load Ratings
J max
PB RA...RRB Page 180
L
RPB RA...RRB Page 180
RPB Series
3
TO ORDER – specify unit and shaft diameter. i.e.; PBS 1 ⁄16". Popular sizes are in bold.
Unit Shaft H H2 J J L A H1 N R d1 O S1 T Bearing Collar Stamping Unit
Diam. max min Number Number Radial Load Wt.
(1)
Rating
in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs lbs
mm mm mm mm mm mm mm mm mm mm mm mm mm mm N kg
7 3 3 3 5 11 11 1 1
PB
1
⁄2 ⁄8 1 ⁄4 3 ⁄16 2 ⁄16 3 ⁄8 1 0.1 ⁄32 ⁄32 1 ⁄8 0.718 0.869 ⁄2 RA008RRB S1008K 300 0.44
5
PB ⁄8 22.2 44.4 81 55.6 92.1 25.4 2.54 8.7 8.7 28.6 18.24 22.07 12.7 RA010RRB S1010K 1340 0.2
PB 17 RAE17RRB SE17K
1 1 1 1 13 13 5 5
2 ⁄16 3 ⁄2 2 ⁄2 4 ⁄8 ⁄32 ⁄32 1 ⁄16 ⁄8
3
PB ⁄4 1 1 0.1 0.859 0.923 RA012RRB S1012K 350 0.57
PB 20 25.4 52.4 88.9 63.5 104.8 25.4 2.54 10.3 10.3 33.3 21.82 23.44 15.9 RAE20RRB SE20K 1560 0.259
7
PB 8 ⁄ RA014RRB S1014K
15 1 7 15 13 1 1 13 13 1 9
PB 16 ⁄ 1 ⁄8 2 ⁄32 3 ⁄16 2 ⁄16 4 ⁄2 1 ⁄8 0.208 ⁄32 ⁄32 1 ⁄2 1 0.923 ⁄16 RA015RRB S1015K 400 0.65
PB 1 28.6 56.4 100 71.4 114 28.6 5.28 10.3 10.3 38.1 25.4 23.44 14.3 RA100RRB S1100K 1760 0.295
PB 25 RAE25RRB SE25K
1
PB 1 ⁄8 RA102RRB S1102K
3 5 5 1 7 1 13 13 3 3
PB 1 ⁄16 1 ⁄16 2 ⁄8 4 ⁄8 3 4 ⁄8 1 ⁄4 0.145 ⁄32 ⁄32 1 ⁄4 1 1.052 ⁄4 RA103RRB S1103K 600 1.05
1
PB 1 ⁄4S 33.3 66.7 104.8 76.2 123.8 31.8 3.68 10.3 10.3 44.5 25.4 26.72 19 RA103RRB2 S1103K3 2650 0.476
PB 30 RAE30RRB SE30K
(1) 1
Housing thrust rating is ⁄3 of housing radial load rating. Load ratings are upright mounted capacities with load direction toward base.
These units should not be mounted vertically or upside down.
242
VFMST Series
This zinc plated pressed metal flange unit is assembled with an
RA-RR prelubricated extended inner ring type bearing.
The VFMST is ideal for light duty applications and features flush L1
d1
H J
mounting, added contamination protection and is self-aligning. B1
Bearing Data
LFST Series
Fafnir LFST zinc plated, pressed steel, flush mounted, housed series Bearing Data
simplifies bearing flange unit installations. A special conductive Unit Bearing Number Dimensions and Load Ratings
rubber interliner reduces noise and vibration and allows for alignment
LFST RAL...NPP Page 184
while the pressed steel flange assures rigid bearing support. Bolt hole
spacing permits interchangeability with competitive mountings. The
LFST unit offers compactness, economy, corrosion resistant housing H
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: LFST 1" POPULAR SIZES ARE IN BOLD.
243
RR Flangette Units
Fafnir Flangette units consist of two interchangeable pressed steel, Recommended shaft tolerances: 1⁄2"-1 15⁄16", nominal to -.0005", -.013 mm;
2"- 2 23⁄16", nominal to -.0010", -.025 mm.
zinc plated flanges which house a standard Fafnir wide inner ring ball Bearing Data
bearing with self-locking collar. The spherical inside surfaces of each
Unit Bearing Number Dimensions and Load Ratings
pair of flanges mates with the spherical outside surface of the
bearing’s outer ring to provide initial self-alignment. RR KRRB Page 177
The RR Flangette is equipped with the KRRB (R-Seal) side inner
ring ball bearing. All units are non-relubricatable.
J J A
H2
H d1 MINIMUM
30° 30° FRAME
OPENING
N2
N
STAMPING SIZES HOLE WIDTH SQ. STAMPING SIZES
40MS-72MS TOLERANCE ± .005 80MS-100MS
P
A1
E K
(2)
Unit Shaft H A J N H2 A1 E K d1 Bolt P N2 Bearing Collar Stamping Unit
Diam. Hole Size flange hole Number Number Size Radial Wt.
Width diam. to Load
(1)
` short long clear sq. Rating
shank shank shank
in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs. lbs
mm mm mm mm mm mm mm mm mm mm mm mm mm mm N kg
1 3 9 1 9 15 15 1 1 13
RR ⁄2 3 ⁄16 ⁄16 2 ⁄2 ⁄32 1 ⁄16 0.15 1 ⁄32 1 ⁄8 ⁄4 0.006 0.1 ⁄32 1008KRRB S1008K 40MS 600 0.65
5
RR ⁄8 81 14.2 63.5 7.1 49.2 3.8 25.4 11.9 28.6 6.4 0.15 2.54 10.3 1010KRRB S1010K 2650 0.295
RR 17 E17KRRB SE17K
3 9 5 13 11 3 1 19 5 5 1
RR ⁄4 3 ⁄16 ⁄8 2 ⁄16 ⁄32 2 ⁄16 0.166 1 ⁄8 ⁄32 1 ⁄16 ⁄16 0.021 0.115 ⁄2 1012KRRB S1012K 47MS 700 0.89
RR 20 90.5 15.8 71.4 8.7 55.6 4.22 28.6 15.1 33.3 7.9 0.53 2.92 12.7 E20KRRB SE20K 3100 0.404
7
RR ⁄8 1014KRRB S1014K
15 3 11 11 3 1 19 1 5 1
RR 16⁄ 3 ⁄4 ⁄16 3 ⁄32 2 ⁄8 0.166 1 ⁄8 ⁄32 1 ⁄2 ⁄16 0.021 0.115 ⁄2 1015KRRB S1015K 52MS 800 1.08
RR 1 95.2 17.4 76.2 8.7 60.3 4.22 28.6 15.1 38.1 7.9 0.53 2.92 12.7 1100KRRB S1100K 3550 0.49
RR 25 E25KRRB SE25K
1
RR 1 ⁄8 1102KRRB S1102K
3 7 11 9 13 13 9 5 3 3 19
RR 1 ⁄16 4 ⁄16 ⁄16 3 ⁄16 ⁄32 2 ⁄16 0.208 1 ⁄32 ⁄8 1 ⁄4 ⁄8 0.011 0.104 ⁄32 1103KRRB S1103K 62MS 1100 1.66
1
RR 1 ⁄4S 112.7 17.4 90.5 10.3 71.4 5.28 32.5 15.9 44.5 9.5 0.28 2.64 15.1 1103KRRB3 S1103K3 4900 0.753
RR 30 E30KRRB SE30K
1
RR 1 ⁄4 1104KRRB S1104K
5 13 3 15 13 3 3 5 1 3 19
RR 1 ⁄16 4 ⁄16 ⁄4 3 ⁄16 ⁄16 3 ⁄16 0.208 1 ⁄8 ⁄8 2 ⁄8 ⁄8 0.011 0.104 ⁄32 1105KRRB S1105K 72MS 1400 2.12
3
RR 1 ⁄8 122.2 19 100 10.3 81 5.28 34.9 15.9 54 9.5 0.28 2.64 15.1 1106KRRB S1106K 6220 0.962
7
RR 1 ⁄16 1107KRRB S1107
RR 35 E35KRRB SE35K
1 13 13 11 17 9 1 23 3 1 49
RR 1 ⁄2 5 ⁄16 ⁄16 4 ⁄16 ⁄32 3 ⁄16 0.268 1 ⁄2 ⁄32 2 ⁄8 ⁄2 0.013 0.107 ⁄64 1108KRRB S1108KT 80MS 1700 2.52
9
RR 1 ⁄16 147.6 20.6 119.1 13.5 90.5 6.8 38.1 18.3 60.3 12.7 0.33 2.72 19.4 1109KRRB S1109KT 7500 1.143
RR 40 E40KRRB SE40K
5 7 7 3 17 13 1 23 1 1 49
RR 1 ⁄8 5 ⁄8 ⁄8 4 ⁄4 ⁄32 3 ⁄16 0.268 1 ⁄2 ⁄32 2 ⁄2 ⁄2 0.013 0.107 ⁄64 1110KRRB S1110K 85MS 1700 3.64
11
RR 1 ⁄16 149.2 22.2 120.6 13.5 96.8 6.8 38.1 18.3 63.5 12.7 0.33 2.72 19.4 1111KRRB S1111K 7500 1.651
RR 45 E45KRRB SE45K
7 1 7 17 21 13 3 1 49
RR 1 ⁄8 6 ⁄8 ⁄8 5 ⁄32 4 0.298 1 ⁄32 ⁄16 2 ⁄4 ⁄2 0 0.077 ⁄64 1114KRRB S1114K 90MS 1900 4.14
15
RR 1 ⁄16 155.6 22.2 127 13.5 101.6 7.56 42.1 20.6 69.8 12.7 0 1.96 19.4 1115KRRB S1115K 8500 1.878
RR 50 E50KRRB SE50K
RR 2 1200KRRB S1200K
1 9 15 7 17 7 7 15 1 49
RR 2 ⁄8 6 ⁄16 ⁄16 5 ⁄16 ⁄32 4 ⁄16 0.298 1 ⁄8 ⁄16 3 ⁄2 0 0.077 ⁄64 1202KRRB S1202K 100MS 2300 5
3
RR 2 ⁄16 166.7 23.8 138.1 13.5 112.7 7.56 47.6 23.8 76.2 12.7 0 1.96 19.4 1203KRRB S1203K 10200 2.268
RR 55 E55KRRB SE55K
(1)
Thrust ratings for stampings are 50% of radial ratings.
(2)
Stampings must be ordered in pairs to assemble bearing.
244
RA Flangette Units A
The RA zinc plated Flangette unit is like the Fafnir RR Flangette units J J
Bearing Data A1
A
2
Unit Bearing Number Dimensions and Load Ratings E K
in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs. lbs
mm mm mm mm mm mm mm mm mm mm mm mm mm mm N kg
1
RA ⁄2 RA008RRB S1008K
9 3 9 1 9 15 15 7 1 1 13
RA ⁄16 3 ⁄16 ⁄16 2 ⁄2 ⁄32 1 ⁄16 0.150 ⁄16 ⁄32 1 ⁄8 ⁄4 0.006 0.1 ⁄32 RA009RRB S1009K 40MS 600 0.61
5
RA ⁄8 81 14.2 63.5 7.1 49.2 3.81 23.8 5.6 28.6 6.4 0.15 2.54 10.3 RA010RRB S1010K 2650 0.277
RA 17 RAE17RRB SE17K
3 9 5 13 11 3 63 1 5 5 1
RA ⁄4 3 ⁄16 ⁄8 2 ⁄16 ⁄32 2 ⁄16 0.166 ⁄64 ⁄4 1 ⁄16 ⁄16 0.021 0.115 ⁄2 RA012RRB S1012K 47MS 700 0.8
RA 20 90.5 15.8 71.4 8.7 55.6 4.22 25 6.4 33.3 7.9 0.53 2.92 12.7 RAE20RRB SE20K 3100 0.363
13
RA ⁄16 RA013RRB S1013K
7 3 11 11 3 63 9 1 5 1
RA ⁄8 3 ⁄4 ⁄16 3 ⁄32 2 ⁄8 0.166 ⁄64 ⁄32 1 ⁄2 ⁄16 0.021 0.115 ⁄2 RA014RRB S1014K 52MS 800 0.9
15
RA ⁄16 95.2 17.4 76.2 8.7 60.3 4.22 25 7.1 38.1 7.9 0.53 2.92 12.7 RA015RRB S1015K 3550 0.408
RA 1 RA100RRB S1100K
RA 25 RAE25RRB SE25K
1
RA 1 ⁄16 RA101RRB S1103K
1 7 11 9 13 13 9 17 3 3 19
RA 1 ⁄8 4 ⁄16 ⁄16 3 ⁄16 ⁄32 2 ⁄16 0.208 1 ⁄64 ⁄64 1 ⁄4 ⁄8 0.011 0.104 ⁄32 RA102RRB S1102K 62MS 1100 1.47
3
RA 1 ⁄16 112.7 17.4 90.5 10.3 71.4 5.28 29.0 6.7 44.5 9.5 0.28 2.64 15.1 RA103RRB S1103K 4900 0.667
1
RA 1 ⁄4S RA103RRB3 S1103K3
RA 30 RAE30RRB SE30K
1
RA 1 ⁄4 RA104RRB S1104K
5 13 3 15 13 3 1 19 1 3 19
RA 1 ⁄16 4 ⁄16 ⁄4 3 ⁄16 ⁄32 3 ⁄16 0.208 1 ⁄4 ⁄64 2 ⁄8 ⁄8 0.011 0.104 ⁄32 RA105RRB S1105K 72MS 1400 1.96
3
RA 1 ⁄8 122.2 19 100 10.3 81 5.28 31.8 7.5 54 9.5 0.28 2.64 15.1 RA106RRB S1106K 6220 0.889
7
RA 1 ⁄16 RA107RRB S1107
RA 35 RAE35RRB SE35K
1 13 13 11 17 9 27 19 3 1 49
RA 1 ⁄2 5 ⁄16 ⁄16 4 ⁄16 ⁄32 3 ⁄16 0.268 1 ⁄64 ⁄64 2 ⁄8 ⁄2 0.013 0.107 ⁄64 RA108RRB S1108KT 80MS 1700 3.19
9
RA 1 ⁄16 147.6 20.6 119.1 13.5 90.5 6.8 36.1 7.5 60.3 12.7 0.33 2.72 19.4 RA109RRB S1109KT 7500 1.447
RA 40 RAE40RRB SE40K
5
RA 1 ⁄8 RA110RRB S1110K
11 7 7 3 17 13 27 19 1 1 49
RA 1 ⁄16 5 ⁄8 ⁄8 4 ⁄4 ⁄32 3 ⁄16 0.268 1 ⁄64 ⁄64 2 ⁄2 ⁄2 0.013 0.107 ⁄64 RA111RRB S1111K 85MS 1700 3.26
3
RA 1 ⁄4 149.2 22.2 120.6 13.5 96.8 6.8 36.1 7.5 63.5 12.7 0.33 2.72 19.4 RA112RRB S1112K 7500 1.479
RA 45 RAE45RRB SE45K
13
RA 1 ⁄16 RA113RRB S1113K
7 1 7 17 7 9 3 1 49
RA 1 ⁄8 6 ⁄8 ⁄8 5 ⁄32 4 0.300 1 ⁄16 ⁄32 2 ⁄4 ⁄2 0 0.077 ⁄64 RA114RRB S1114K 90MS 1900 3.68
15
RA 1 ⁄16 155.6 22.2 127 13.5 101.6 7.56 36.5 7.1 69.8 12.7 0 1.96 19.4 RA115RRB S1115K 8500 1.669
RA 50 RAE50RRB SE50K
RA 2 RA200RRB S1200K
1 9 15 7 17 7 19 29 1 49
RA 2 ⁄16 6 ⁄16 ⁄16 5 ⁄16 ⁄32 4 ⁄16 0.300 1 ⁄32 ⁄64 3 ⁄2 0 0.077 ⁄64 RA201RRB S1201K 100MS 2300 4.41
1
RA 2 ⁄8 166.7 23.8 138.1 13.5 112.7 7.56 40.5 8.3 76.2 12.7 0 1.96 19.4 RA202RRB S1202K 10200 2
3
RA 2 ⁄16 RA203RRB S1203K
RA 55 RAE55RRB SE55K
(1)
Thrust ratings for stampings are 50% of radial ratings.
(2)
Stampings must be ordered in pairs to assemble bearing.
245
Flangette Units d1
H2
MINIMUM
d1
H2
MINIMUM
FRAME
OPENING
FRAME
OPENING
The Fafnir two bolt zinc plated Flangette units are designed for
H
installations where the standard three bolt flangettes cannot be used J N2
Like the standard three-bolt Flangette, they are available with the P
RA-RRB extended inner ring ball bearings (RAT) and the KRRB wide A1
P
inner ring ball bearings (RRT) with self locking collars. HOLE WIDTH (SQ) A1
A
2
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: RAT 1" Flangette
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs. lbs
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm N kg
1 5 3 9 1 9 15 15 7 1 1 13
RAT ⁄2 2 ⁄16 3 ⁄16 ⁄16 2 ⁄2 ⁄32 1 ⁄16 0.150 ⁄16 ⁄32 1 ⁄8 ⁄4 0.006 0.1 ⁄32 RA008RRB S1008K 40MST 600 0.47
5
RAT ⁄8 58.7 81 14.2 63.5 7.1 49.2 3.81 23.8 5.6 28.6 6.4 0.15 2.54 10.3 RA010RRB S1010K 2650 0.213
RAT 17 RAE17RRB SE17K
3 5 9 5 13 11 3 63 1 5 5 1
RAT ⁄4 2 ⁄8 3 ⁄16 ⁄8 2 ⁄16 ⁄32 2 ⁄16 0.166 ⁄64 ⁄4 1 ⁄16 ⁄16 0.021 0.115 ⁄2 RA012RRB S1012K 47MST 700 0.66
RAT 20 66.7 90.5 15.8 71.4 8.7 55.6 4.22 25 6.4 33.3 7.9 0.53 2.92 12.7 RAE20RRB SE20K 3100 0.299
7
RAT 8 ⁄ RA014RRB S1014K
15 51 3 11 11 3 63 9 1 5 1
RAT 16 ⁄ 2 ⁄64 3 ⁄4 ⁄16 3 ⁄32 2 ⁄8 0.166 ⁄64 ⁄32 1 ⁄2 ⁄16 0.021 0.115 ⁄2 RA015RRB S1015K 52MST 800 0.73
RAT 1 71 95.2 17.4 76.2 8.7 60.3 4.22 25 7.1 38.1 7.9 0.53 2.92 12.7 RA100RRB S1100K 3550 0.331
RAT 25 RAE25RRB SE25K
1
RAT 1 ⁄16 RA101RRB S1103K
1 5 7 11 9 13 13 9 17 3 3 19
RAT 1 ⁄8 3 ⁄16 4 ⁄16 ⁄16 3 ⁄16 ⁄32 2 ⁄16 0.208 1 ⁄64 ⁄64 1 ⁄4 ⁄8 0.011 0.104 ⁄32 RA102RRB S1102K 62MST 1100 1.17
3
RAT 1 ⁄16 84.1 112.7 17.4 90.5 10.3 71.4 5.28 29 6.7 44.5 9.5 0.28 2.64 15.1 RA103RRB S1103K 4900 0.531
1
RAT 1 ⁄4S RA103RRB2 S1103K3
RAT 30 RAE30RRB SE30K
1
RAT 1 ⁄4 RA104RRB S1104K
5 11 15 7 15 13 3 17 17 1 3 19
RAT 1 ⁄16 3 ⁄16 4 ⁄16 ⁄8 3 ⁄16 ⁄32 3 ⁄16 0.208 1 ⁄64 ⁄64 2 ⁄8 ⁄8 0.011 0.104 ⁄32 RA105RRB S1105K 72MST 1400 1.05
3
RAT 1 ⁄8 93.7 125.4 22.2 100 10.3 81 5.28 32.1 6.7 54 9.5 0.28 2.64 15.1 RA106RRB S1106K 6220 0.476
7
RAT 1 ⁄16 RA107RRB S1107K
RAT 35 RAE35RRB SE35K
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: RRT 1" Flangette
Unit Shaft L H A J N H2 A1 E K d1 Bolt P N2 Bearing Collar Stamping Unit
Diam. Hole Size flange hole Number Number Size Radial Wt.
Width diam. to Load
short long clear sq. Rating
shank shank shank
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs. lbs
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm N kg
1 5 3 9 1 9 15 15 7 1 1 13
RRT ⁄2 2 ⁄16 3 ⁄16 ⁄16 2 ⁄2 ⁄32 1 ⁄16 0.150 ⁄16 ⁄32 1 ⁄8 ⁄4 0.006 0.1 ⁄32 1008KRRB S1008K 40MST 600 0.47
5
RRT ⁄8 58.7 81 14.2 63.5 7.1 49.2 3.81 23.8 5.6 28.6 6.4 0.15 2.54 10.3 1010KRRB S1010K 2650 0.213
RRT 17 E17KRRB SE17K
3 5 9 5 13 11 3 63 1 5 5 1
RRT ⁄4 2 ⁄8 3 ⁄16 ⁄8 2 ⁄16 ⁄32 2 ⁄16 0.166 ⁄64 ⁄4 1 ⁄16 ⁄16 0.021 0.115 ⁄2 1012KRRB S1012K 47MST 700 0.66
RRT 20 66.7 90.5 15.8 71.4 8.7 55.6 4.22 25 6.4 33.3 7.9 0.53 2.92 12.7 E20KRRB SE20K 3100 0.299
7
RRT 8 ⁄ 1014KRRB S1014K
15 51 3 11 11 3 63 9 1 5 1
RRT 16 ⁄ 2 ⁄64 3 ⁄4 ⁄16 3 ⁄32 2 ⁄8 0.166 ⁄64 ⁄32 1 ⁄2 ⁄16 0.021 0.115 ⁄2 1015KRRB S1015K 52MST 800 0.73
RRT 1 71 95.2 17.4 76.2 8.7 60.3 4.22 25 7.1 38.1 7.9 0.53 2.92 12.7 1100KRRB S1100K 3550 0.331
RRT 25 E25KRRB SE25K
1
RRT 1 ⁄16 1101KRRB S1103K
1 5 7 11 9 13 13 9 17 3 3 19
RRT 1 ⁄8 3 ⁄16 4 ⁄16 ⁄16 3 ⁄16 ⁄32 2 ⁄16 0.208 1 ⁄64 ⁄64 1 ⁄4 ⁄8 0.011 0.104 ⁄32 1102KRRB S1102K 62MST 1100 1.17
3
RRT 1 ⁄16 84.1 112.7 17.4 90.5 10.3 71.4 5.28 29 6.7 44.5 9.5 0.28 2.64 15.1 1103KRRB S1103K 4900 0.531
1
RRT 1 ⁄4S 1103KRRB3 S1103K3
RRT 30 E30KRRB SE30K
1
RRT 1 ⁄4 1104KRRB S1104K
5 11 15 7 15 13 3 17 17 1 3 19
RRT 1 ⁄16 3 ⁄16 4 ⁄16 ⁄8 3 ⁄16 ⁄32 3 ⁄16 0.208 1 ⁄64 ⁄64 2 ⁄8 ⁄8 0.011 0.104 ⁄32 1105KRRB S1105K 72MST 1400 1.05
3
RRT 1 ⁄8 93.7 125.4 22.2 100 10.3 81 5.28 32.1 6.7 54 9.5 0.28 2.64 15.1 1106KRRB S1106K 6220 0.476
7
RRT 1 ⁄16 1107KRRB S1107K
RRT 35 E35KRRB SE35K
246
30° 30°
RATR RA...RRB Page 180 H1
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: RATR 1" Flangette
Unit Shaft H3 H A J N H2 A1 E K d1 H1 L1 Bolt q{I N2 Bearing Collar Stamping Unit
Diam. Hole Size flange hole Number Number Size Radial Wt.
Width diam. to Load
short long clear sq. Rating
shank shank shank
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs. lbs
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm N kg
3 9 5 13 11 3 63 1 5 5 1 5 1
RATR ⁄4 3 3 ⁄16 ⁄8 2 ⁄16 ⁄32 2 ⁄16 0.166 ⁄64 ⁄4 1 ⁄16 1 ⁄16 1 ⁄16 ⁄16 0.006 0.1 ⁄2 RA012RRB S1012K 47MSTR 700 0.69
RATR 20 76.2 90.5 15.8 71.4 8.7 55.6 4.22 25 6.4 33.3 33.3 27 7.9 0.15 2.54 12.7 RAE20RRB SE20K 3100 0.313
7
RATR 8 ⁄ RA014RRB S1014K
15 1 3 11 11 3 63 9 1 3 3 5 1
RATR 16 ⁄ 3 ⁄8 3 ⁄4 ⁄16 3 ⁄32 2 ⁄8 0.166 ⁄64 ⁄32 1 ⁄2 1 ⁄8 1 ⁄32 ⁄16 0.021 0.115 ⁄2 RA015RRB S1015K 52MSTR 800 0.78
RATR 1 79.4 95.2 17.4 76.2 8.7 60.3 4.22 25 7.1 38.1 34.9 27.8 7.9 0.53 2.92 12.7 RA100RRB S1100K 3550 0.354
RATR 25 RAE25RRB SE25K
1
RATR 1 ⁄16 RA101RRB S1103K
1 11 7 11 9 13 13 9 17 3 1 3 19
RATR 1 ⁄8 3 ⁄16 4 ⁄16 ⁄16 3 ⁄16 ⁄32 2 ⁄16 0.208 1 ⁄64 ⁄64 1 ⁄4 1 ⁄2 1 ⁄8 0.011 0.104 ⁄32 RA102RRB S1102K 62MSTR 1100 1.16
3
RATR 1 ⁄16 93.7 112.7 17.4 90.5 10.3 71.4 5.28 29 6.7 44.5 38.1 25.4 9.5 0.28 2.64 15.1 RA103RRB S1103K 4900 0.526
1
RATR 1 ⁄4S RA103RRB2 S1103K3
RATR 30 RAE30RRB SE30K
1
RATR 1 ⁄4 RA104RRB S1104K
5 5 3 15 13 3 17 17 1 3 17 3 19
RATR 1 ⁄16 4 ⁄32 5 ⁄4 3 ⁄16 ⁄32 3 ⁄16 0.208 1 ⁄64 ⁄64 2 ⁄8 1 ⁄4 1 ⁄64 ⁄8 0.011 0.104 ⁄32 RA105RRB S1105K 72MSTR 1400 1.55
3
RATR 1 ⁄8 105.6 127 19 100 10.3 81 5.28 32.1 6.7 54 44.4 32.1 9.5 0.28 2.64 15.1 RA106RRB S1106K 6300 0.703
7
RATR 1 ⁄16 RA107RRB S1107K
RATR 35 RAE35RRB SE35K
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: RRTR 1" Flangette
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs. lbs
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm N kg
3 9 5 13 11 3 1 19 5 5 1 5 1
RRTR ⁄4 3 3 ⁄16 ⁄8 2 ⁄16 ⁄32 2 ⁄16 0.166 1 ⁄8 ⁄32 1 ⁄16 1 ⁄16 1 ⁄16 ⁄16 0.006 0.1 ⁄2 1012KRRB S1012K 47MSTR 700 0.69
RRTR 20 76.2 90.5 15.8 71.4 8.7 55.6 4.22 28.6 15.1 33.3 33.3 27 7.9 0.15 2.54 12.7 E20KRRB SE20K 3100 0.313
7
RRTR 8 ⁄ 1014KRRB S1014K
15 1 3 11 11 3 1 19 1 3 3 5 1
RRTR 16 ⁄ 3 ⁄8 3 ⁄4 ⁄16 3 ⁄32 2 ⁄8 0.166 1 ⁄8 ⁄32 1 ⁄2 1 ⁄8 1 ⁄32 ⁄16 0.021 0.115 ⁄2 1015KRRB S1015K 52MSTR 800 0.78
RRTR 1 79.4 95.2 17.4 76.2 8.7 60.3 4.22 28.6 15.1 38.1 34.9 27.8 7.9 0.53 2.92 12.7 1100KRRB S1100K 3550 0.354
RRTR 25 E25KRRB SE25K
1
RRTR 1 ⁄16 1101KRRB S1103K
1 11 7 11 9 13 13 9 5 3 1 3 19
RRTR 1 ⁄8 3 ⁄16 4 ⁄16 ⁄16 3 ⁄16 ⁄32 2 ⁄16 0.208 1 ⁄32 ⁄8 1 ⁄4 1 ⁄2 1 ⁄8 0.011 0.104 ⁄32 1102KRRB S1102K 62MSTR 1100 1.16
3
RRTR 1 ⁄16 93.7 112.7 17.4 90.5 10.3 71.4 5.28 32.5 15.9 44.5 38.1 25.4 9.5 0.28 2.64 15.1 1103KRRB S1103K 4900 0.526
1
RRTR 1 ⁄4S 1103KRRB3 S1103K3
RRTR 30 E30KRRB SE30K
1
RRTR 1 ⁄4 1104KRRB S1104K
5 5 3 15 13 3 3 41 1 3 17 3 19
RRTR 1 ⁄16 4 ⁄32 5 ⁄4 3 ⁄16 ⁄32 3 ⁄16 0.208 1 ⁄8 ⁄64 2 ⁄8 1 ⁄4 1 ⁄64 ⁄8 0.011 0.104 ⁄32 1105KRRB S1105K 72MSTR 1400 1.55
3
RRTR 1 ⁄8 105.6 127 19 100 10.3 81 5.28 34.9 16.3 54 44.4 32.1 9.5 0.28 2.64 15.1 1106KRRB S1106K 6300 0.703
7
RRTR 1 ⁄16 1107KRRB S1107
RRTR 35 E35KRRB SE35K
247
The relubricatable units incorporate G-KRRB wide inner ring ball 40°
45°
bearings and GRA-RRB extended inner ring ball bearings with positive
contact land-riding seals and self-locking collars. Two separate H2
d1
H2
MINIMUM
d1 MINIMUM
stampings are required to make a complete relubricatable flangette. FRAME
OPENING
FRAME
OPENING
Stamping A contains the boss for the grease fitting and a grease
groove which allows the grease to enter the holes in the outer ring of the N2
N2
bearing. Stamping B contains a similar groove for the same purpose.
With the grease groove in either stamping the bearing can be reversed
in the housing and still be relubricated. P P
N HOLE WIDTH SQ.
TOLERANCE ± .005 A1 A1
A A
Recommended shaft tolerances: 1⁄2"-1 15⁄16", nominal to -.0005", -.013mm; 2 2
TO ORDER, SPECIFY BEARING SERIES AND SHAFT DIAMETER. Example: GRA1" or GRR 1" Flangette
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm (GRA) (GRR) N
13
⁄16 GRA013RRB G1013KRRB S1013K
7 3 11 11 3 9 17 17 1 1
G52MSA ⁄8 3 ⁄4 ⁄16 3 ⁄32 2 ⁄8 0.166 1 1 ⁄64 ⁄64 ⁄32 1 ⁄2 0.021 0.115 ⁄2 GRA014RRB G1014KRRB S1014K 800
15
& ⁄16 95.2 17.4 76.2 8.7 60.3 4.22 25.4 29 6.7 13.5 38.1 0.53 2.92 12.7 GRA015RRB G1015KRRB S1015K 3550
G52MSB 1 GRA100RRB G1100KRRB S1100K
25 GRAE25RRB GE25KRRB SE25K
1
1 ⁄16 GRA101RRB G1101KRRB S1103K
1 7 3 9 13 13 5 19 17 39 47 19
G62MSA 1 ⁄8 4 ⁄16 ⁄4
3 ⁄16 ⁄322 ⁄16 0.208 1 ⁄32 1 ⁄64 ⁄64 ⁄64 1 ⁄64 0.011 0.104 ⁄32 GRA102RRB G1102KRRB S1102K 1100
3
& 1 ⁄16 112.7 19.05 90.5 10.3 71.4 5.28 29.4 32.9 6.7 15.5 44.1 0.28 2.64 15.1 GRA103RRB G1103KRRB S1103K 4900
1
G62MSB 1 ⁄4S GRA103RRB2 G1103KRRB2 S1103K3
30 GRAE30RRB GE30KRRB SE30K
1
1 ⁄4 GRA104RRB G1104KRRB S1104K
5 13 7 15 13 3 19 13 5 39 1 19
G72MSA 1 ⁄16 4 ⁄16 ⁄8 3 ⁄16 ⁄32 3 ⁄16 0.268 1 ⁄64 1 ⁄32 ⁄16 ⁄64 2 ⁄8 0.011 0.104 ⁄32 GRA105RRB G1105KRRB S1105K 1400
3
& 1 ⁄8 122.2 22.2 100 10.3 81 6.8 32.9 35.7 7.9 15.5 54 0.28 2.64 15.1 GRA106RRB G1106KRRB S1106K 6220
7
G72MSB 1 ⁄16 GRA107RRB G1107KRRB S1107K
35 GRAE35RRB GE35KRRB SE35K
(2) 1 13 1 11 17 9 7 17 31 45 3 49
G80MSA 1 ⁄2 5 ⁄16 1 ⁄4 4 ⁄16 ⁄32 3 ⁄16 0.298 1 ⁄16 1 ⁄32 ⁄64 ⁄64 2 ⁄8 0.013 0.107 ⁄64 GRA108RRB G1108KRRB S1108KT 1700
9
& 1 ⁄16 147.6 31.8 119.1 13.5 90.4 7.56 36.5 38.9 12.3 17.9 60.3 0.33 2.72 19.4 GRA109RRB G1109KRRB S1109KT 7500
(2)
G80MSB 40 GRAE40RRB GE40KRRB SE40K
(2) 5
G85MSA 1 ⁄8 GRA110RRB G1110KRRB S1110K
11 7 1 3 17 13 7 17 15 45 1 49
& 1 ⁄16 5 ⁄8 1 ⁄4 4 ⁄4 ⁄323 ⁄16 0.298 1 ⁄16 1 ⁄32 ⁄32 ⁄64 2 ⁄2 0.013 0.107 ⁄64 GRA111RRB G1111KRRB S1111K 1700
(2) 3
G85MSB 1 ⁄4 149.2 31.8 120.6 13.5 96.8 7.56 36.5 38.9 11.9 17.9 63.5 0.33 2.72 19.4 GRA112RRB G1112KRRB S1112K 7500
45 GRAE45RRB GE45KRRB SE45K
(2) 13
G90MSA 1 ⁄16 GRA113RRB G1113KRRB S1113K
7 1 17 29 43 21 13 3 49
& 1 ⁄8 6 ⁄8 1 5 ⁄32 4 0.328 1 ⁄64 1 ⁄64 ⁄64 ⁄16 2 ⁄4 – 0.077 ⁄64 GRA114RRB G1114KRRB S1114K 1900
(2) 15
G90MSB 1 ⁄16 155.6 25.4 127 13.5 101.6 8.34 36.9 42.5 8.3 20.6 69.8 – 1.96 19.4 GRA115RRB G1115KRRB S1115K 8500
50 GRAE50RRB GE50KRRB SE50K
248
CR
S1 T
RCR
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: RCSM 3⁄4" or RCR 3⁄4" or CR 3
⁄4", POPULAR SIZES ARE IN BOLD.
Unit Shaft D A A1 G M d1 S1 T Bearing Collar Housing Unit
Diam. Number(3) Number Radial Load Wt.
Rating(1)
in. in. in. in. in. in. in. in. in. lbs lbs
mm mm mm mm mm mm mm mm mm N kg
249
Bearing Data
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: RABR 1". POPULAR SIZES ARE IN BOLD.
in. in. in. in. in. in. in. in. in. in. in. lbs. lbs. lbs.
1
RS, RSU ⁄2 RA008RR — S1008K —
5 1 1 27 1 1 1 1 5 31 23 1
RS, RSU ⁄8 1 ⁄16 2 ⁄8 1 ⁄64 2 ⁄8 3 ⁄8 4 ⁄4 1 ⁄16 ⁄8 ⁄64 ⁄64 1 ⁄8 RA010RR — S1010K — 40 1.1 1.25
3 1 1 15 1 1 5 1 5 31 11 15
RS, RSU, RBG, RBGU ⁄4 1 ⁄4 2 ⁄2 1 ⁄32 2 ⁄2 3 ⁄2 4 ⁄8 1 ⁄8 ⁄8 ⁄64 ⁄32 1 ⁄16 RA012RR RB012 S1012K RS012 50 1.5 1.75
15 5 11 19 3 7 1 5 31 11 1
RS, RSU, RBG, RBGU ⁄16 1 ⁄16 2 ⁄16 1 ⁄32 2 ⁄4 3 ⁄8 5 1 ⁄4 ⁄8 ⁄64 ⁄32 1 ⁄2 RA015RR RB015 S1015K S1015K 60
5 11 19 3 7 1 5 31 11 1
RS, RSU, RBG, RBGU 1 1 ⁄16 2 ⁄16 1 ⁄32 2 ⁄4 3 ⁄8 5 1 ⁄4 ⁄8 ⁄64 ⁄32 1 ⁄2 RA100RR RB100 S1100K S1100K 60 1.8 2
3 9 5 3 3 1 3 3 39 3 47
RS, RSU, RBG, RBGU 1 ⁄16 1 ⁄16 3 ⁄32 1 ⁄4 3 ⁄16 4 ⁄2 6 1 ⁄8 ⁄4 ⁄64 ⁄8 1 ⁄64 RA103RR RB103 S1103K RS103 90 2.75 3.1
* Load ratings for RBGU pillow blocks are approximately twice the above figures. Special one ounce tubes of grease are available for relubrication.
§ Suffix for RA -RR bearing is FS450. To order, specify: RBG 1 grease tube.
250
NLTU Series
J1
TO ORDER COMPLETE ASSEMBLY, SPECIFY NLTU FRAME AND RTU TAKE-UP UNIT REQUIRED.
Example: NLTU5 frame and RTU 1 11⁄16". If frame only is required, order by frame number, i.e., NLTU3.
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs
mm mm mm mm mm mm mm mm mm mm mm mm mm kg
5
1 ⁄16, 3⁄4, 1
9 ⁄8
15
2 ⁄32
7
12 ⁄8
7
14 ⁄8
3
⁄16 1
1 ⁄16
1
2 ⁄8
9
5 ⁄16
9
6 ⁄16 1 ⁄4
3 7
6 ⁄16 1
1
⁄2 7
⁄16 8.13
13
⁄16, 7⁄8, 15⁄16, 1 231.8
7
11 ⁄16
62.7
17
2 ⁄32
327
7
15 ⁄16
377.8
7
17 ⁄16
4.8
3
⁄16
27
1 ⁄4
1
54
7
2 ⁄16
141.3
1
6 ⁄16
166.7
1
7 ⁄16
44.4
2
163.5
23
7 ⁄32
25.4
1
12.7
1
⁄2 7
⁄16
3.691
1
1 1 3
3 1 ⁄16,1 ⁄8,1 ⁄16, 290.5 64.23 392.1 432.2 4.8 31.8 61.9 154 179.4 50.8 196.1 25.4 12.7 11.02
1 5 3 7 7 7 7 7 3 1 17 1 1 23 1 7
1 ⁄4,1 ⁄16,1 ⁄8,1 ⁄16 11 ⁄16 2 ⁄16 15 ⁄16 17 ⁄16 ⁄16 1 ⁄4 2 ⁄32 6 ⁄16 7 ⁄16 2 7 ⁄32 1 ⁄2 ⁄16 5.003
290.5 61.9 392.1 432.2 4.8 31.8 64.3 154 179.4 50.8 196.1 25.4 12.7
1 9 3 21 1 3 3 7 13 5 13 1 3 1 9 1
5 1 ⁄2,1 ⁄16, 11 ⁄4 3 ⁄32 17 ⁄2 19 ⁄4 ⁄16 1 ⁄16 2 ⁄16 7 ⁄16 8 ⁄16 2 ⁄4 8 ⁄4 1 ⁄8 ⁄16 ⁄2 18.1
5 11 3
1 ⁄8,1 ⁄16,1 ⁄4, 298.4 92.9 444.5 501.6 4.8 36.5 71.4 185.7 223.8 57.2 222.5 28.6 14.3 8.217
13 7 15
1 ⁄16,1 ⁄8,1 ⁄16,
1 21 1 3 3 1 7 5 7 1 3 1 5 9
14 ⁄4 3 ⁄32 21 ⁄2 23 ⁄4 ⁄16 1 ⁄2 3 ⁄32 8 ⁄8 10 ⁄16 2 ⁄2 10 ⁄4 1 ⁄8 ⁄8 ⁄16
1 1 3
7 2, 2 ⁄16, 2 ⁄8, 2 ⁄16, 362 92.9 546.1 603.2 4.8 38.1 81.8 219.1 265.1 63.5 273 28.6 15.9 27.12
1 5 3 7 1 21 1 3 3 1 11 5 7 1 3 1 5 9
2 ⁄4, 2 ⁄16, 2 ⁄8, 2 ⁄16 14 ⁄4 3 ⁄32 21 ⁄2 23 ⁄4 ⁄16 1 ⁄2 3 ⁄32 8 ⁄8 10 ⁄16 2 ⁄2 10 ⁄4 1 ⁄8 ⁄8 ⁄16 12.312
362 92.9 546.1 603.2 4.8 38.1 84.9 219.1 265.1 63.5 273 28.6 15.9
TU Series R L1
TRAVEL
K
J J1
L A
TO ORDER COMPLETE ASSEMBLY, SPECIFY TU FRAME AND RTU OR TU TAKE-UP UNIT REQUIRED. Example: TU5 frame and RTU 1 11⁄16".
in. in. in. in. in. in. in. in. in. in. in. in. lbs.
mm mm mm mm mm mm mm mm mm mm kg
3 13 1 1 1 9 1 5 3 1 3
1 ⁄4, ⁄16, 8 4 ⁄2 16 ⁄2 18 ⁄2 ⁄16 2 ⁄2 5 ⁄32 1 ⁄8 2 ⁄8 — ⁄8 16.5
7
⁄8, 15⁄16,1 203.2 114.3 419.2 469.9 14.3 63.5 131 34.9 54 — 7.491
1 1 3 3 3 5 13 7 1 9 7
3 1 ⁄16,1 ⁄8, 1 ⁄16, 10 5 19 ⁄8 21 ⁄8 ⁄8 2 ⁄16 5 ⁄8 1 ⁄2 2 ⁄16 — ⁄16 25.25
1 5 3 7
1 ⁄4, 1 ⁄16, 1 ⁄8,1 ⁄16 254 127 492.1 542.9 15.9 71.4 149.2 38.1 65.1 — 11.464
1 9 5 1 7 7 3 1 3 1 1
5 1 ⁄2, 1 ⁄16, 1 ⁄8, 10 5 ⁄2 20 ⁄8 22 ⁄8 ⁄4 3 ⁄4 6 ⁄4 2 3 ⁄2 — ⁄2 44.5
11 3 13
1 ⁄16,1 ⁄4, 1 ⁄16, 254 139.7 530.2 581 19 82.6 171.4 50.8 88.9 — 20.203
7 15
1 ⁄8, 1 ⁄16
1 1 3 1 5 3 7 7 11 1 5
7 2, 2 ⁄16, 2 ⁄8, 2 ⁄16, 2 ⁄4, 12 6 ⁄8 25 ⁄8 27 ⁄8 ⁄8 4 8 ⁄32 2 ⁄2 4 — ⁄8 80
5 3 7
2 ⁄16, 2 ⁄8, 2 ⁄16 304.8 168.3 644.5 708 22.2 101.6 211.9 63.5 101.6 — 36.320
11 15
(1) 5 3 3 5 19 1 3 9 5
9 2 ⁄16, 2 ⁄16 12 7 ⁄8 27 ⁄8 30 ⁄8 1 4 ⁄8 9 ⁄32 3 ⁄4 4 ⁄4 2 ⁄16 ⁄8 116.25
304.8 193.7 695.3 771.5 25.4 117.5 243.7 82.6 120.6 65.1 52.778
(1) 23
Dimension K is 2 ⁄32" (69.1 mm) for 2 15⁄16" shaft diameters.
251
Bearing Data
RTU Industrial Series Unit Bearing Number Dimensions and Load Ratings
A2
3
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: RTU ⁄4" or RTU 2 11⁄16". POPULAR SIZES IN BOLD.
Unit Shaft G T S1 A2 A1 A L1 H2 N N2 L2 N1 P L3 H1 H Bearing Collar Housing Unit
Diam. Number Number Number Wt.
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm kg
7 13 1 11 17 5 21 1 3 1 1 5 15 1 5
1 ⁄8 ⁄16 1 ⁄16 1 ⁄32 ⁄32 1 ⁄8 2 ⁄32 2 ⁄4 ⁄4 1 ⁄4 ⁄2 ⁄8 1 ⁄16 2 ⁄4 3 ⁄8
3
RTU ⁄4 3 G1012KRRB S1012K T-18832 3.18
RTU 20 47.6 20.6 27 34.1 13.5 41.3 67.5 57.2 19 31.8 12.7 15.9 49.2 57.2 76.2 92.1 GE20KRRB SE20K 1.444
7
RTU 8 ⁄ G1014KRRB S1014K
15 15 7 1 15 17 3 21 1 3 1 1 5 3 1 5
RTU 16 ⁄ 1 ⁄16 ⁄8 1 ⁄16 1 ⁄32 ⁄32 1 ⁄4 2 ⁄32 2 ⁄4 ⁄4 1 ⁄4 ⁄2 ⁄8 1 ⁄8 2 ⁄4 3 3 ⁄8 G1015KRRB S1015K T-18696 3.3
RTU 1 42.9 22.2 27 37.3 13.5 44.4 67.5 57.2 19 31.8 12.7 15.9 34.9 57.2 76.2 92.1 G1100KRRB S1100K 1.498
RTU 25 GE25KRRB SE25K
1
RTU 1 ⁄16 G1101KRRB S1101K
1 3 3 1 17 27 7 7 7 1 5 5 1 1 1
RTU 1 ⁄8 2 ⁄16 1 1 ⁄16 1 ⁄2 ⁄32 2 2 ⁄32 2 ⁄16 ⁄8 1 ⁄16 ⁄2 ⁄8 1 ⁄8 2 ⁄2 3 ⁄2 4 ⁄8 G1102KRRB S1102K T-18694 4.23
3
RTU 1 ⁄16 55.6 25.4 30.2 38.1 13.5 50.8 72.2 61.9 22.2 36.5 12.7 15.9 41.3 63.5 88.9 104.8 G1103KRRB S1103K 1.92
RTU 30 GE30KRRB SE30K
1
RTU 1 ⁄4 G1104KRRB S1104K
5 5 7 9 7 17 3 15 1 7 7 1 5 15 3 1 1
RTU 1 ⁄16 2 ⁄32 ⁄8 1 ⁄32 1 ⁄16 ⁄32 1 ⁄4 2 ⁄16 2 ⁄2 ⁄8 1 ⁄16 ⁄2 ⁄8
1 ⁄16 2 ⁄4 3 ⁄2 4 ⁄8 G1105KRRB S1105K T-18692 4.46
3
RTU 1 ⁄8 54.8 22.2 32.5 36.5 13.5 44.5 74.6 63.5 22.2 36.5 12.7 15.9 49.2 69.8 88.9 104.8 G1106KRRB S1106K 2.025
7
RTU 1 ⁄16 G1107KRRB3 S1107K
RTU 35 GE35KRRB SE35K
21 9 3 3 11 9 15 1 1 15 5 3 3 1 31 3
2 ⁄32 1 ⁄32 1 ⁄8 1 ⁄4 ⁄16 2 ⁄16 3 ⁄32 3 ⁄4 1 ⁄8 1 ⁄16 ⁄8 ⁄4 2 ⁄32 3 ⁄4 3 ⁄32 4 ⁄4
1
RTU 1 ⁄2 G1108KRRB S1108KT T-18834 7.3
9
RTU 1 ⁄16 67.5 32.5 34.9 44.4 17.5 65.1 88.1 82.6 28.6 49.2 15.9 19 53.3 82.6 100.8 120.6 G1109KRRB S1109K 3.314
RTU 40 GE40KRRB SE40K
5
RTU 1 ⁄8 G1110KRRB S1110K
21 9 3 3 11 9 15 1 1 15 5 3 3 1 31 3
2 ⁄32 1 ⁄32 1 ⁄8 1 ⁄4 ⁄16 2 ⁄16 3 ⁄32 3 ⁄4 1 ⁄8 1 ⁄16 ⁄8 ⁄4 2 ⁄32 3 ⁄4 3 ⁄32 4 ⁄4
11
RTU 1 ⁄16 G1111KRRB S1111K T-18762 6.97
3
RTU 1 ⁄4 67.5 32.5 34.9 44.4 17.5 65.1 88.1 82.6 28.6 49.2 15.9 19 53.3 82.6 100.8 120.6 G1112KRRB S1112K 3.164
RTU 45 GE45KRRB SE45K
7 25 9 1 15 11 9 19 1 1 15 5 3 11 3 31 3
RTU 1 ⁄8 2 ⁄32 1 ⁄32 1 ⁄2 1 ⁄16 ⁄16 2 ⁄16 3 ⁄32 3 ⁄4 1 ⁄8 1 ⁄16 ⁄8 ⁄4 2 ⁄32 3 ⁄8 3 ⁄32 4 ⁄4 G1114KRRB S1114K T-18690 7.9
15
RTU 1 ⁄16 70.6 32.5 38.1 49.2 17.5 65.1 91.3 82.6 28.6 49.2 15.9 19 59.5 85.7 100.8 120.6 G1115KRRB S1115K 3.587
RTU 50 GE50KRRB SE50K
252
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: YTU 3⁄4". POPULAR SIZES ARE IN BOLD.
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
17 13 11 17 5 21 1 3 1 1 5 5 1 5
1 ⁄32 ⁄16 1 ⁄32 ⁄32 1 ⁄8 2 ⁄32 2 ⁄4 ⁄4 1 ⁄4 ⁄2 ⁄8 1 ⁄16 2 ⁄4 3 ⁄8
3
YTU ⁄4 0.719 3 GY1012KRRB T-18832
YTU 20 38.9 20.6 18.3 34.1 13.5 41.3 67.5 57.2 19 31.8 12.7 15.9 33.3 57.2 76.2 92.1 GYE20KRRB
7
YTU 8 ⁄ GY1014KRRB T-18696
15 21 7 15 17 3 21 1 3 1 1 5 3 1 5
YTU 16 ⁄ 1 ⁄32 ⁄8 0.781 1 ⁄32 ⁄32 1 ⁄4 2 ⁄32 2 ⁄4 ⁄4 1 ⁄4 ⁄2 ⁄8 1 ⁄8 2 ⁄4 3 3 ⁄8 GY1015KRRB
YTU 1 42.1 22.2 19.8 37.3 13.5 44.4 67.5 57.2 19 31.8 12.7 15.9 34.9 57.2 76.2 92.1 GY1100KRRB
YTU 25 GYE25KRRB
1 7 1 17 27 7 7 7 1 5 5 1 1 1
YTU 1 ⁄8 1 ⁄8 1 0.875 1 ⁄2 ⁄32 2 2 ⁄32 2 ⁄16 ⁄8 1 ⁄16 ⁄2 ⁄8 1 ⁄8 2 ⁄2 3 ⁄2 4 ⁄8 GY1102KRRB T-18694
3
YTU 1 ⁄16 47.6 25.4 22.2 38.1 13.5 50.8 72.2 61.9 22.2 36.5 12.7 15.9 41.3 63.5 88.9 104.8 GY1103KRRB
YTU 30 GYE30KRRB
1 7 7 7 17 3 15 1 7 7 1 5 15 3 1 1
YTU 1 ⁄4 1 ⁄8 ⁄8 1 1 ⁄16 ⁄32 1 ⁄4 2 ⁄16 2 ⁄2 ⁄8 1 ⁄16 ⁄2 ⁄8 1 ⁄16 2 ⁄4 3 ⁄2 4 ⁄8 GY1104KRRB T-18692
3
YTU 1 ⁄8 47.6 22.2 25.4 36.5 13.5 44.5 74.6 63.5 22.2 36.5 12.7 15.9 49.2 69.8 88.9 104.8 GY1106KRRB
7
YTU 1 ⁄16 GY1107KRRB3
YTU 35 GYE35KRRB
1 15 9 3 11 9 15 1 1 15 5 3 3 1 31 3
YTU 1 ⁄2 2 ⁄32 1 ⁄32 1.188 1 ⁄4 ⁄16 2 ⁄16 3 ⁄32 3 ⁄4 1 ⁄8 1 ⁄16 ⁄8 ⁄4 2 ⁄32 3 ⁄4 3 ⁄32 4 ⁄4 GY1108KRRB T-18834
YTU 40 62.7 32.5 30.2 44.4 17.5 65.1 88.1 82.6 28.6 49.2 15.9 19 53.3 82.6 100.8 120.6 GYE40KRRB
5
YTU 1 ⁄8 GY1110KRRB
11 15 9 3 11 9 15 1 1 15 5 3 3 1 31 3
YTU 1 ⁄16 2 ⁄16 1 ⁄32 1.188 1 ⁄4 ⁄16 2 ⁄16 3 ⁄32 3 ⁄4 1 ⁄8 1 ⁄16 ⁄8 ⁄4 2 ⁄32 3 ⁄4 3 ⁄32 4 ⁄4 GY1111KRRB T-18762
3
YTU 1 ⁄4 62.7 32.5 30.2 44.4 17.5 65.1 88.1 82.6 28.6 49.2 15.9 19 53.3 82.6 100.8 120.6 GY1112KRRB
YTU 45 GYE45KRRB
15 9 9 15 11 9 19 1 1 15 5 3 11 3 31 3
YTU 1 ⁄16 2 ⁄16 1 ⁄32 1.281 1 ⁄16 ⁄16 2 ⁄16 3 ⁄32 3 ⁄4 1 ⁄8 1 ⁄16 ⁄8 ⁄4 2 ⁄32 3 ⁄8 3 ⁄32 4 ⁄4 GY1115KRRB T-18690
YTU 1 50 65 32.5 32.5 49.2 17.5 65.1 91.3 82.6 28.6 49.2 15.9 19 59.5 85.7 100.8 120.6 GYE50KRRB
11 3 3 1 3 23 3 1 3 1 23 3 7
2 ⁄16 1 ⁄8 2 ⁄16 1 ⁄16 2 ⁄4 4 ⁄32 1 ⁄8 2 ⁄2 ⁄4 1 ⁄4 2 ⁄32 5 ⁄32 5 ⁄8
3
YTU 2 ⁄16 1.312 4 4 GY1203KRRB T-18828
YTU 55 68.3 34.9 33.3 55.6 27 69.8 119.9 101.6 34.9 63.5 19 31.8 69.1 101.6 129.4 149.2 GYE55KRRB
1 15 3 1 1 3 23 3 1 3 1 23 3 7
YTU 2 ⁄4 2 ⁄16 1 ⁄8 1.562 2 ⁄16 1 ⁄16 2 ⁄4 4 ⁄32 4 1 ⁄8 2 ⁄2 ⁄4 1 ⁄4 2 ⁄32 4 5 ⁄32 5 ⁄8 GY1204KRRB T-18830
7
YTU 2 ⁄16 74.6 34.9 39.7 52.4 27 69.8 119.9 101.6 34.9 63.5 19 31.8 69.1 101.6 129.4 149.2 GY1207KRRB
253
A1
Bearing Data A3
Unit Bearing Number Dimensions and Load Ratings
3
Recommended shaft tolerances: /4"-1 15/16", nominal to -.0005", -.013mm;
2"-2 15/16", nominal to -.0010", -.025mm.
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: VTU 3⁄4" or VTU 2 11⁄16". POPULAR SIZES ARE IN BOLD.
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. lbs
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm kg
3 47 13 59 11 17 5 21 1 3 1 1 5 5 1 5
VTU ⁄4 1 ⁄64 ⁄16 ⁄64 1 ⁄32 ⁄32 1 ⁄8 2 ⁄32 2 ⁄4 ⁄4 1 ⁄4 ⁄2 ⁄8 1 ⁄16 2 ⁄4 3 3 ⁄8 GRA012RRB S1012K T-18832 3.02
VTU 20 44.1 20.6 23.4 34.1 13.5 41.3 67.5 57.2 19 31.8 12.7 15.9 33.3 57.2 76.2 92.1 GRAE20RRB SE20K 1.372
7
VTU 8 ⁄ GRA014RRB
15 25 7 29 15 17 3 21 1 3 1 1 5 3 1 5
VTU 16 ⁄ 1 ⁄32 ⁄8 ⁄321 ⁄32 ⁄32 1 ⁄4 2 ⁄32 2 ⁄4 ⁄4 1 ⁄4 ⁄2 ⁄8 1 ⁄8 2 ⁄4 3 3 ⁄8 GRA015RRB S1015K T-18696 3.21
VTU 1 45.2 22.2 23.0 37.3 13.5 44.4 67.5 57.2 19 31.8 12.7 15.9 34.9 57.2 76.2 92.1 GRA100RRB S1100K 1.458
VTU 25 GRAE25RRB SE25K
1 1 1 1 17 27 7 7 7 1 5 5 1 1 1
VTU 1 ⁄8 2 ⁄16 1 1 ⁄16 1 ⁄2 ⁄32 2 2 ⁄32 2 ⁄16 ⁄8 1 ⁄16 ⁄2 ⁄8 1 ⁄8 2 ⁄2 3 ⁄2 4 ⁄8 GRA102RRB S1102K T-18694 4.10
3
VTU 1 ⁄16 52 25.4 27 38.1 13.5 50.8 72.2 61.9 22.2 36.5 12.7 15.9 41.3 63.5 88.9 104.8 GRA103RRB S1103K3 1.862
VTU 30 GRAE30RRB SE30K
1
VTU 1 ⁄4 GRA104RRB S1104K
3 1 7 5 7 17 3 15 1 7 7 1 5 15 3 1 1
VTU 1 ⁄8 2 ⁄32 ⁄8 1 ⁄32 1 ⁄16 ⁄32 1 ⁄4 2 ⁄16 2 ⁄2 ⁄8
1 ⁄16 ⁄2 ⁄8
1 ⁄16 2 ⁄4 3 ⁄2 4 ⁄8 GRA106RRB S1106K T-18692 4.30
7
VTU 1 ⁄16 51.6 22.2 29.4 36.5 13.5 44.5 74.6 63.5 22.2 36.5 12.7 15.9 49.2 69.8 88.9 104.8 GRA107RRB S1107K 1.953
VTU 35 GRAE35RRB SE35K
1 9 9 9 3 11 9 15 1 1 15 5 3 3 1 31 3
VTU 1 ⁄2 2 ⁄16 1 ⁄32 1 ⁄32 1 ⁄4 ⁄16 2 ⁄16 3 ⁄32 3 ⁄4 1 ⁄8 1 ⁄16 ⁄8 ⁄4 2 ⁄32 3 ⁄4 3 ⁄32 4 ⁄4 GRA108RRB S1108KT T-18834 7.03
VTU 40 65 32.5 32.5 44.4 17.5 65.1 88.1 82.6 28.6 49.2 15.9 19 53.3 82.6 100.8 120.6 GRAE40RRB SE40K 3.192
5
VTU 1 ⁄8 GRA110RRB S1110K
11 9 9 9 3 11 9 15 1 1 15 5 3 3 1 31 3
VTU 1 ⁄16 2 ⁄16 1 ⁄32 1 ⁄32 1 ⁄4 ⁄16 2 ⁄16 3 ⁄32 3 ⁄4 1 ⁄8 1 ⁄16 ⁄8 ⁄4 2 ⁄32 3 ⁄4 3 ⁄32 4 ⁄4 GRA111RRB S1111K T-18762 6.63
3
VTU 1 ⁄4 65 32.5 32.5 44.4 17.5 65.1 88.1 82.6 28.6 49.2 15.9 19 53.3 82.6 100.8 120.6 GRA112RRB S1112K 3.009
VTU 45 GRAE45RRB SE45K
7 9 9 9 15 11 9 19 1 1 15 5 3 11 3 31 3
VTU 1 ⁄8 2 ⁄16 1 ⁄32 1 ⁄32 1 ⁄16 ⁄16 2 ⁄16 3 ⁄32 3 ⁄4 1 ⁄8 1 ⁄16 ⁄8 ⁄4 2 ⁄32 3 ⁄8 3 ⁄32 4 ⁄4 GRA114RRB S1114K T-18690 7.36
15
VTU 1 ⁄16 65 32.5 32.5 49.2 17.5 65.1 91.3 82.6 28.6 49.2 15.9 19 59.5 85.7 100.8 120.6 GRA115RRB S1115K 3.342
VTU 50 GRAE50RRB SE50K
13 3 7 3 1 3 23 3 1 3 1 23 3 7
VTU 2 2 ⁄16 1 ⁄8 1 ⁄16 2 ⁄16 1 ⁄16 2 ⁄4 4 ⁄32 4 1 ⁄8 2 ⁄2 ⁄4 1 ⁄4 2 ⁄32 4 5 ⁄32 5 ⁄8 GRA200RRB S1200K T-18828 12.73
3
VTU 2 ⁄16 71.4 34.9 36.5 55.6 27 69.8 119.9 101.6 34.9 63.5 19 31.8 69.1 101.6 129.4 149.2 GRA203RRB S1203K 5.784
VTU 55 GRAE55RRB SE55K
254
3
Recommended shaft tolerances: 2"-2 /16", nominal to -.0010", -.025mm.
Bearing Data
1
Unit Bearing Number Dimensions and Load Ratings
TO ORDER, SPECIFY UNIT AND SHAFT DIAMETER. Example: YTU 3⁄4". POPULAR SIZES ARE IN BOLD.
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
TTU 2 G1200KPPB4
1 1 3 1 3 23 1 3 1 23 3 7
TTU 2 ⁄16 3.109 7 ⁄2 1.716 2.980 2 ⁄16 1 ⁄16 2 ⁄4 4 ⁄32 4 2 ⁄2 1.365 ⁄4 1 ⁄4 2 ⁄32 4 5 ⁄32 5 ⁄8 G1201KPPB4 T-18830
1
TTU 2 ⁄8 79 190.5 43.6 75.7 55.6 27 69.8 119.9 101.6 63.5 34.7 19 31.8 69.1 101.6 129.4 149.2 G1202KPPB4
3
TTU 2 ⁄16 G1203KPPB4
TTU 55 GE55KPPB4
255
α α α
A pressed steel pulley and a Fafnir precision ball bearing with rubber
BELT
seals are combined to make a complete economical self-contained
unit. There are two pulley designs - one for V-belts and one for the PITCH
DIA.
backs of V-belts. They are made for A, B, C and D section belts.
A chain idler is available that is identical in construction to the Flat .720 d D1 .720 d D1 .720 d
D D D
Idler with the addition of an assembled rubber “tire” (Detail part No.
A-10927). The rubber “tire” cushions the chain preventing undue
wear on the pulley surface or chain.
The ball bearing is a Fafnir single row radial type with inner ring
extended on both sides to provide clearance for abutting parts and
greater support on the shaft. The contact type Fafnir rubber seals
A A A
assure positive retention of lubricant and full protection against dirt,
dust or foreign matter. All units are non-relubricatable. V - IDLER FLAT - IDLER CHAIN - IDLER
Special features of the Fafnir Idler Pulley Units are the smoothly
rolled-over edges which eliminate belt chafing and scuffing, and the
thru “weep holes” on the rivet circle which allow water drainage when
the pulley is mounted in a horizontal position.
V IDLERS
(1) 3 1
006-11520A 32 WS3NPP3 0.394 / 0.385 3 ⁄4 — 0.49 2 ⁄2 — — 0.32
10.01 / 9.78 76.2 19 12.45 63.5 0.145
(2) 7 5
10874 34 203NPP 0.6693 / 0.6690 4 ⁄8 — 0.5 3 ⁄8 — — 0.92
17.000 / 16.993 101.6 22.2 12.7 92.1 0.417
7 5
010-10874 34 203KRR2 0.635 / 0.640 4 ⁄8 — 0.5 3 ⁄8 — — 0.96
16.13 / 16.26 101.6 22.2 12.7 92.1 0.435
1 1 3 1
008-10482 32 203KRR5 0.515 / 0.510 5 ⁄16 1 ⁄4 — 0.872 — 3 ⁄4 4 ⁄2 1.26
13.08 / 12.95 128.6 31.8 22.15 95.2 114.3 0.572
1 1 3 1
010-10482 32 203KRR2 0.635 / 0.640 5 ⁄16 1 ⁄4 — 0.872 — 3 ⁄4 4 ⁄2 1.23
16.13 / 16.26 128.6 31.8 22.15 95.2 114.3 0.558
5 1 3
008-10853 32 203KRR5 0.515 / 0.510 7 ⁄16 1 ⁄4 — 0.872 — 6 6 ⁄4 2.5
13.08 / 12.95 185.7 31.8 22.15 152.4 171.4 1.134
5 1 3
010-10853 32 203KRR2 0.635 / 0.640 7 ⁄16 1 ⁄4 — 0.872 — 6 6 ⁄4 2.47
16.13 / 16.26 185.7 31.8 22.15 152.4 171.4 1.12
FLAT IDLERS
(1) 5 7 7
006-11581A 10 WS3NPP3 0.394 / 0.385 3 ⁄8 1 ⁄32 3 ⁄8 — — — 0.57
10.01 / 9.78 92.1 30.6 76.2 22.2 0.259
5 7
008-10601 10 203KRR5 0.515 / 0.510 4 ⁄8 1 ⁄16 4 1 — — — 1.11
13.08 / 12.95 117.5 36.5 101.6 25.4 0.503
5 7
010-10601 10 203KRR2 0.635 / 0.640 4 ⁄8 1 ⁄16 4 1 — — — 1.08
16.13 / 16.26 117.5 36.5 101.6 25.4 0.49
1 7 1
008-10483 10 203KRR5 0.515 / 0.510 6 ⁄4 1 ⁄16 5 ⁄2 1 — — — 1.77
13.08 / 12.95 158.8 36.5 139.7 25.4 0.803
1 7 1
010-10483 10 203KRR2 0.635 / 0.640 6 ⁄4 1 ⁄16 5 ⁄2 1 — — — 1.74
16.13 / 16.26 158.8 36.5 139.7 25.4 0.789
1 7 1
008-10650 50 203KRR5 0.515 / 0.510 6 ⁄4 1 ⁄16 5 ⁄2 1 — — — 1.73
13.08 / 12.95 158.8 36.5 139.7 25.4 0.785
1 7 1
010-10650 50 203KRR2 0.635 / 0.640 6 ⁄4 1 ⁄16 5 ⁄2 1 — — — 1.7
16.13 / 16.26 158.8 36.5 139.7 25.4 0.771
3 13
008-11515 10 203KRR5 0.515 / 0.510 8 ⁄4 1 ⁄32 8 1 — — — 2.73
13.08 / 12.95 222.2 35.7 203.2 25.4 1.238
3 13
010-11515 10 203KRR2 0.635 / 0.640 8 ⁄4 1 ⁄32 8 1 — — — 2.7
16.13 / 16.26 222.2 35.7 203.2 25.4 1.225
3 29 1
008-10731 10 203KRR5 0.515 / 0.510 8 ⁄4 1 ⁄32 8 1 ⁄2 — — — 3.38
13.08 / 12.95 222.2 48.4 203.2 38.1 1.488
3 29 1
010-10731 10 203KRR2 0.635 / 0.640 8 ⁄4 1 ⁄32 8 1 ⁄2 — — — 3.25
16.13 / 16.26 222.2 48.4 203.2 38.1 1.474
CHAIN IDLERS
5 7 3
008-10927 10 203KRR5 0.515 / 0.510 4 ⁄8 1 ⁄16 4 ⁄8 1 — — — 1.27
13.08 / 12.95 117.5 36.5 111.1 25.4 0.576
5 7 3
010-10927 10 203KRR2 0.635 / 0.640 4 ⁄8 1 ⁄16 4 ⁄8 1 — — — 1.24
16.13 / 16.26 117.5 36.5 111.1 25.4 0.562
(1) (2)
Inner ring width .5469"-.5419"; 13.891mm-13.764mm. 12mm Inner ring width .4724"-.4674".
256
P d F
D A
1
TO ORDER, SPECIFY SPROCKET NUMBER. Example: 010-5017S Idler Sprocket.
5
008-5017-S 203KRR5 0.515 / 0.500 ⁄8 3.4 3.729 0.343 0.962 0.72 800 0.66
E8728 13.08 / 12.95 50 17 15.9 86.36 94.72 8.71 24.43 18.29 3550 0.299
3
008-6015-S 203KRR5 0.515 / 0.500 ⁄4 3.607 3.989 0.459 0.962 0.72 800 0.92
E8728 13.08 / 12.95 60 15 19 91.62 101.32 11.66 24.43 18.29 3550 0.417
1
010-4018-S 203KRR2 0.640 / 0.635 ⁄2 2.879 3.145 0.284 0.962 0.72 800 0.44
E8728 16.26 / 16.13 40 18 12.7 73.13 79.88 7.21 24.43 18.29 3550 0.2
5
010-5017-S 203KRR2 0.640 / 0.635 ⁄8 3.4 3.729 0.343 0.962 0.72 800 0.66
E8728 16.26 / 16.13 50 17 15.9 86.36 94.72 8.71 24.43 18.29 3550 0.299
3
010-6015-S 203KRR2 0.640 / 0.635 ⁄4 3.607 3.989 0.459 0.962 0.72 800 0.92
E8728 16.26 / 16.13 60 15 19 91.62 101.32 11.66 24.43 18.29 3550 0.417
5
011H-5017-S 204KRR2 0.695 / 0.690 ⁄8 3.4 3.729 0.343 1.131 0.72 800 0.66
E8728 HEX 50 17 15.9 86.36 94.72 8.71 28.73 18.29 3550 0.299
17.65 / 17.52
3
011H-6015-S 204RR2 0.695 / 0.690 ⁄4 3.607 3.989 0.459 0.962 0.72 800 0.92
E8728 HEX 60 15 19 91.62 101.32 11.66 24.43 18.29 3550 0.417
17.65 / 17.52
012-8012-S 204RR6 0.7500 / 0.7505 1 3.864 4.347 0.575 1.048 0.61 1080 1.49
E8728 19.18 / 19.05 80 12 25.4 98.15 110.41 14.6 26.62 15.49 4800 0.676
257
C MUB replaced by 1000KRB & Col. Standard Series (SM) Wide Inner Ring Example: 2 11⁄16 inch (uses MUB 2 11⁄16 inch)
(B type), collar, caps, and wire
DRNR 1000KR & Col.(Two) Single R-Seal (A-Type), complete bearing number marked on seal Example: DRNR 1 3⁄16 inch (uses two 1103KR & Col.)
FLCT RA000RRB & Col. Non-Relubricatable; B-Spherical outer ring; RR-Double R-Seal Bearing identification marked on seal.
GRFD, GRFDR, G1000KRRB & Col. G-Relubricatable; B-Spherical outer ring; RR-Double R-Seal Complete bearing number marked on seal
3
GRFTD, GRFTDR Example: GRFD 1 ⁄16 incn (uses G1103KRRB & col.)
GRKD, GRSD G1000KRRB & Col. G-Relubricatable; B-Spherical outer ring; RR-Double R-Seal Complete bearing number marked on seal
Example: GRKD 1 3⁄16 inch (uses G1103KRRB & Col.)
GVFD, GVFDR, GRA000RRB & Col. G-Relubricatable; B-Spherical outer ring; RR-Double R-Seal Bearing identification marked on seal.
GVFTD, GVFTDR
GVKD, GVSD GRA000RRB & Col. G-Relubricatable; B-Spherical outer ring; RR-Double R-Seal Bearing identification marked on seal.
LAK, LAS G1000KLLB & Col. G-Relubricatable; B-Spherical outer ring; LL-Double Mechani-Seal Complete bearing number marked on seal
Example: LAK 1 3⁄16 inch (uses G1103KLLB & Col.)
LAKHL 1000KLS & Col. L-Single Mechani-Seal; S-External self-aligning Complete bearing number marked on seal
Example: LAKHL 1 3⁄16 inch (uses 1103KLS & Col.)
LAO, LSAO GN000KLLB & Col. G-Relubricatable; B-Spherical outer ring; LL-Double Mechani-Seal Complete bearing number marked on seal
Example: LAO 1 3⁄16 inch (uses GN103KLLB & Col.)
LCJ, LCJT G1000KLLB & Col. G-Relubricatable; B-Spherical outer ring; Complete bearing number marked on seal
LL-Double Mechani-Seal Example: LCJ 1 3⁄16 inch (uses G1103KLLB & Col.)
LCJO GN000KLLB G-Relubricatable; N-Heavy Series; Complete bearing number marked on seal
B-Spherical outer ring; LL-Double Mechani-Seal Example: LCJO 1 3⁄16 inch (uses GN103KLLB & Col.)
PB, PBS, RA000RRB & Col. Non-Relubricatable; B-Spherical outer ring; RR-Double R-Seal Bearing identification marked on seal.
VKD, VSD
RA Flangette, RA000RRB & Col. Non-Relubricatable; B-Spherical outer ring; RR-Double R-Seal Bearing identification marked on seal.
RAT Flangette
RA Relubricatable GRA000RRB & Col. G-Relubricatable; B-Spherical outer ring; RR-Double R-Seal To order, specify bearings & markings,
Flangette Example: 1-GRA103RRB & Col., 1-G62MSA marking,
1-G62MSB marking
RAK, RAS, G1000KRRB & Col. G-Relubricatable; B-Spherical outer ring; RR-Double R-Seal Complete bearing number marked on seal
RAKH, RSA Example: RAK 1 3⁄16 inch (uses G1103KRRB & Col.)
RAKHL 1000KRS & Col R-Single R-Seal; S-External self-aligning Complete bearing number marked on seal
Example: RAKHL 1 3⁄16 inch (uses 1103KRS & Col.)
RAKN, RASN 1000KRRB & Col. Non-Relubricatable; B-Spherical outer ring; RR-Double R-Seal Complete bearing number marked on seal
Example: RAKN 1 3⁄16 inch (uses 1103KRRB & Col.)
RAO, RSAO GN000KRRB & Col. G-Relubricatable; B-Spherical outer ring; RR-Double R-Seal Complete bearing number marked on seal
Example: RSAO 3 3⁄16 inch (uses GN303KRRB & Col.)
RASC GC1000KRRB & Col. G-Relubricatable;C-Concentric collar; B-Spherical outer ring; Complete bearing number marked on seal
RR-Double R-Seal Example: RASC 1 3⁄16 inch (uses GC1103KRRB & Col.)
RCJ, RCJT, RC G1000KRRB & Col. G-Relubricatable; B-Spherical outer ring; RR-Double R-Seal Complete bearing number marked on seal
Example: RCJ 1 3⁄16 inch (uses G1103KRRB & Col.)
258
RFC, RCJC, GC1000KRRB & Col. G-Relubricatable; C-Concentric collar; Complete bearing number marked on seal
RCJTC B-Spherical outer ring; RR-Double R-Seal Example: 1 3⁄16 inch (uses GC1103KRRB & Col.)
RFD, RFDR, 1000KRRB & Col. Non-Relubricatable; B-Spherical outer ring; RR-Double R-Seal Complete bearing number marked on seal
RFTD, RFTDR Example: RFD: 1 3⁄16 inch (uses 1103KRRB & Col.)
RKD, RSD 1000KRRB & Col. Non-Relubricatable; B-Spherical outer ring; RR-Double R-Seal Complete bearing number marked on seal
Example: RKD 1 3⁄16 inch (uses 1103KRRB & Col.)
RPB RABR (Shaft Size) Non-Relubricatable; B-Spherical outer ring; RR-Double R-Seal RA000RRB FS-450 Bearing & Col mounted in rubber interliner
Example: RPB 1 3⁄16 (uses an RABR 1 3⁄16 inch)
RR Relubricatable G1000KRRB & Col. G-Relubricatable; B-Spherical outer ring; RR-Double R-Seal To order, specify bearing & markings,
Flangette Example: 1-G1100KRRB & Col., 1-G52MSA marking,
1-G52MSB marking 1
3 3
SA MUB replaced by 1000KRB & Col. Standard Series (SM) Wide Inner Ring Bearing (B type), collar, caps and wire Example: SA 1 ⁄16 inch (uses MUB 1 ⁄16 inch)
3
SAD MUBD replaced by 1000KRB & Col. Standard Series (SM) Wide Inner Ring Bearing Example: SA 1 ⁄16 inch (uses MUB 1 3⁄16 inch)
(B type), dust seal, collar, caps and wire
SADD MUBD replaced by N000KRB & Col. Rear dust seal otherwise same as SAD
SAL SM1000KS & Col. S-External self-aligning ring Example: SAL 1 3⁄16 inch (uses SM1103KS & Col.)
SAO MUOB replaced by 100KRB & Col. Heavy Series (SMN) Wide Inner Ring Bearing (B type), collar, caps and wire Example: SAO 1 3⁄16 inch (uses MUOB 1 3⁄16 inch)
SAOD MUOBD (Shaft Size} Heavy Series (SMN) Wide Inner Ring Bearing Example: SAOD 1 3⁄16 inch (uses MUOBD 1 3⁄16 inch)
(B type), dust seal, collar, caps and wire
SAODD MUOBD (Shaft Size} Rear dust seal otherwise same as SAOD
SAOL SMN000KS & Col. S-External self-aligning ring Heavy Series Example: SAOL 1 3⁄16 inch (uses SMN103KS & Col.)
SAS, SAK GYA000RRB G-Relubricatable; B-Spherical outer ring; RR-Double R-Seal Bearing identification marked on seal.
SCJ, SCJT GYA00RRB G-Relubricatable; B-Spherical outer ring; RR-Double R-Seal Bearing identification marked on seal.
TAK, TAS G1000KPPB & Col. G-Relubricatable; B-Spherical outer ring; PP-Double Tri-Ply-Seal Complete bearing number marked on seal
Example: TAK 1 3⁄16 inch (uses G1103KPPB3 & Col.)
TCJ, TCJT G1000KPPB & Col. G-Relubricatable; B-Spherical outer ring; PP-Double Tri-Ply Seal Complete bearing number marked on seal
Example: TCJ 1 3⁄16 inch (uses G1103KPPB3 & Col.)
VAK, VAS GRA000RRB & Col. G-Relubricatable; B-Spherical outer ring; RR-Double R-Seal Bearing identification marked on seal.
VCJ, VCJT GRA000RRB & Col. G-Relubricatable; B-Spherical outer ring; RR-Double R-Seal Bearing identification marked on seal.
VFD, VFDR, RA000RRB & Col. Non-Relubricatable; B-Spherical outer ring; RR-Double R-Seal Bearing identification marked on seal.
VFTD, VFTDR
YAS, YAK, YASM GY-KRRB G-Relubricatable; B-Spherical outer ring; RR-Double R-Seal Bearing identification marked on seal.
YCJ, YCJT, YTU Y-Series Wide inner ring
OTHER TYPES
LTU Take-UP G1000KLLB & Col. G-Relubricatable; B-Spherical outer ring; Complete bearing number marked on seal
LL-Double Mechani-Seal Example: LTU 1 3⁄16 inch (uses G1103KLLB & Col.)
RHC, RHCM GC1000KRRB & Col. G-Relubricatable;C-Concentric collar; Complete bearing number marked on seal
Hanger B-Spherical outer ring; RR-Double R-Seal Example: RCH 1 1⁄2 inch (uses GC1108KRRB & Col.)
RTU Take-Up G1000KRRB & Col. G-Relubricatable; B-Spherical outer ring; Complete bearing number marked on seal
RR-Double R-Seal Example: RTU 1 3⁄16 inch (uses G1103KRRB & Col.)
STU take-up GYA-RRB G-Relubricatable; B-Spherical outer ring; RR-Double R-Seal Complete bearing number marked on seal Example: STU
1 3⁄16 inch (uses GYA103RRB)
TU Take-Up MUB replaced by 1000KRB & Col. Standard Series (SM) Wide Inner Ring Bearing (B type), collar, caps and wire Example: TU 2 11⁄16 inch (uses MUB 2 11⁄16 & Col.)
YTU take-up GY-KRRB G-Relubricatable; B-Spherical outer ring; RR-Double R-Seal; Y-Series Complete bearing number marked on seal Example: YTU
Wide inner ring with set screw lock 1 3⁄16 inch (uses GY1103KRRB)
259
Machine Units
A complete machine unit consists of either a standard (SM) or heavy and rotates with it. The outer member is pressed in the housing against
(SMN) series wide inner ring bearing, an inner and outer sealing cap, a the face of the outer ring and is held in place by the round retaining wire.
retaining wire and self-locking collar – or an integrally sealed bearing The A type unit is designated MUA (standard series) or MUOA
and collar. These units are available as bearing replacements for Fafnir (heavy series); the B type MUB (standard series) or MUOB (heavy
power transmission units such as the SA, SAO, DSA and DSAO pillow series). The B type bearing is mounted in the spherical housing seat by
blocks, C and CO cylindrical cartridges or special housings. means of two slots milled diametrically opposite each other in the
The “caps” are two steel members which comprise a non-integral housing. The bearing can be inserted at right angles and swiveled into
frictionless labyrinth seal. The inner member is pressed on the inner ring position.
COLLAR
WIRE
A CAP
A TYPE B CAP
BEARING
Figure 1 shows a machine unit with an A type bearing carrying the
designation MUA (standard series) and MUOA (heavy series). It
consists of a wide inner ring, open type or one-piece R-seal bearing,
collar,caps and wire. The “caps” are two steel members which
comprise a non-integral frictionless labyrinth seal. The inner member is
pressed on the inner ring and rotates with it. The outer member is
pressed in the housing against the face of the outer ring and is held in
place by the round retaining wire.
A type units are being converted to a KR type bearing with
collar, “B” cap and wire. Figure 1-MUA, MUOA
COLLAR
B TYPE WIRE
A CAP
Figure 2 is the same as Figure 1 except that the bearing is B type and B CAP
BEARING
seal on collar side is either a labyrinth seal (as shown) or a one-piece R-
seal. In the latter case no wire is supplied. The designation of the
machine unit is MUB (standard series) or MUOB (heavy series). The B
type bearing is mounted in the spherical housing seat by means of
two slots milled diametrically opposite each other in the housing. The
bearing can be inserted at right angles and swiveled into position.No
additional shoulders or snap rings are required to locate this type.
B type units are being converted to a KRB type bearing and
collar.
Figure 2-MUB, MUOB
260
Kit Contents
2
Kit contains everything needed for
Fafnir safety end caps come in a convenient kit that contains
durable mounting.
everything required for a safe and durable mounting:
• Polymer end cap
• Adhesive-backed polymer mounting ring
Ordering Information
• Scuffing pad
• Cleaning cloth KIT(*) SHAFT SIZES
3
204 ECY KIT ⁄4, 20mm
7
205 ECY KIT ⁄8, 15⁄16, 1, 25mm
206 ECY KIT 11⁄16, 11⁄8, 13⁄16, 11⁄4S, 30mm
Installation
207 ECY KIT 11⁄4, 15⁄16, 13⁄8, 17⁄16, 35mm
Main steps in the simple mounting procedure include: 208 ECY KIT 11⁄2, 40mm
1. Use the scuffing pad on housing’s mating surface 209 ECY KIT 15⁄8, 111⁄16, 13⁄4, 45mm
where the mounting ring will be placed. 210 ECY KIT 115⁄16, 2S, 50mm
2. Clean off mounting area *Kits are designed to fit the following housed units-
4-Bolt: YCJ, RCJ, RCJC, TCJ, LCJ, SCJ, VCJ
3. Attach adhesive-backed mounting ring 2-Bolt: YCJT, RCJT, RCJTC, TCJT, LCJT, SCJT, VCJT
4. Hold mounting ring in place with pressure for 60
seconds
5. Allow adhesive to set for minimum of one hour
6. Snap end cap into place
261
263
222 17 K CJ W33 C3
double
130 row
spherical 23 (old ABMA part number)
130
5
264
Spherical
Roller
Bearings
Page Page
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266 SHAFT ADAPTER ACCESSORIES
FOR TAPERED BORE BEARINGS . . . . . . . . . . . . . 286-289
BEARING TYPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266
SHAFT ADAPTER ACCESSORIES
Modification Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 267
FOR STRAIGHT BORE BEARINGS . . . . . . . . . . . . . 290-291
265
INTRODUCTION
Timken Torrington self-aligning spherical roller bearing is a combination The inherent compensation for misalignment provided for by the
radial and thrust bearing, designed to operate even if shaft and housing spherical roller bearing offers the designer the opportunity to use
are, or become, misaligned under load. This type of heavy-load bearing weldments for housing frames instead of complex castings, eliminating
is the favored choice when conditions include heavy loads, plus high-cost machining operations. Even when castings may be preferred,
difficulties in establishing or maintaining housing alignment, or when bore alignment is less critical if spherical roller bearings are specified.
shaft deflection can be expected. Unit design and construction also make the spherical roller bearing
Shaft deflections and housing distortions caused by shock or heavy convenient to handle during installation or maintenance.
loads, which lead to misalignment, are compensated for by the internal Several types of radial spherical roller bearings are now offered by
self-alignment of the bearing elements during operation. Corner loading Torrington and include CJ, YM, YMB, YMD, and VCSJ types.
of rollers, a condition that limits service life on other types of bearings, Bearings are made to RBEC-1 tolerances. Life calculations, shaft
cannot develop in spherical roller bearings. Optimum bearing capacity and housing fits, internal clearances, tolerances and other technical data
can often be realized with up to ±1 1⁄2 degrees of misalignment, for these bearings are found in the Engineering section of this catalog.
depending on the size and series of bearing selected.
BEARING TYPES
YM
These bearings offer higher load ratings for longer life and incorporate
the advanced features of Timken Torrington TracTru™ technology. They
have precision-machined roller riding bronze cages and should be
considered for selection for more severe conditions of use.
YMB
These bearings offer higher load ratings for longer life and incorpo-
rate the advanced features of TracTru™ technology. They have
YM
precision machined, land riding bronze cages and should be
considered for selection for more severe conditions of use.
YMD
These bearings offer higher load ratings for longer life and incorpo-
rate the advanced features of TracTru™ technology. They have
precision machined, land riding two piece bronze cages and should
be considered for selection for more severe conditions of use.
CJ
These bearings offer higher load ratings for longer life and incorporate a
stamped steel window type cage for a broad range of applications, as
well as the advanced features of TracTru™ technology.
266
K Indicates tapered bore. All sizes available with straight or tapered bore. The suffix “K” is added
immediately after the basic numbers in the bearing description (i.e. 22222KCJ).
The taper ratio is 1:12 (diameter to width ). For the 22, 23, 30, 31, 32, 33 and 39 series. Series
40, 41 and 42 have a ratio of 1:30 (diameter to width).
C02 Indicates inner ring with extra close running accuracy (1⁄4 RBEC 1) and marked to show high
and low point of eccentricity.
C04 Indicates outer ring with extra close running accuracy (1⁄4 RBEC 1) and marked to show high
and low point of eccentricity.
W33 Lubrication holes and machined groove in the center of the O.D. are considered standard
features in spherical roller bearings. This feature eliminates the expense of machining a channel
in the housing to introduce lubricant to the bearing.
W94 Lubrication holes in inner ring and lubrication grooves in face of retainer.
W800 Combines W22, W88 and upper two-thirds of specified radial internal clearance.
Other modifications available, contact your local Timken distributor sales location for more information.
267
C C C
r r r
r r r
D D D
d E d E d E
F F F
CJ YM VCSJ
(max.) e
X=1
Y
X = .67
Y
Xo=1
YO (approx.) 2
in. in. in. in. in. in. lbs lbs lbs
mm mm mm mm mm mm kN kN rpm rpm kg
2.3622 5.1181 1.2205 0.08 2.99 4.65 40,200 35,500 0.24 2.81 4.19 2.75 2,300 3,300 4.2
21312VCSJ 60 130 31 2 76 118 179 158 1.9
2.3622 4.3307 1.1024 0.06 2.83 3.95 39,100 32,800 0.24 2.84 4.23 2.78 3,680 4,900 2.6
22212CJ 60 110 28 1.5 72 100 174 146 1.2
2.3622 4.3307 1.1024 0.06 2.83 3.95 36,900 31,400 0.24 2.84 4.23 2.78 3,680 4,900 2.6
22212YM
60 110 28 1.5 72 100 164 140 1.2
2.3622 5.1181 1.811 0.08 2.97 4.6 70,100 60,400 0.35 1.95 2.9 1.91 2,700 3,600 6.6
22312CJ
60 130 46 2 75 117 312 269 3
2.3622 5.1181 1.811 0.08 2.97 4.6 70,100 60,400 0.35 1.95 2.9 1.91 2,700 3,600 6.6
22312YM* 60 130 46 2 75 117 312 269 3
2.5591 5.5118 1.2992 0.08 3.23 5.04 48,300 42,500 0.23 2.91 4.33 2.84 2,100 3,100 5.3
21313VCSJ 65 140 33 2 82 128 215 189 2.4
2.5591 4.7244 1.2205 0.06 3.08 4.29 49,000 39,800 0.24 2.79 4.15 2.73 3,380 4,500 3.4
22213CJ
65 120 31 1.5 78 109 216.5 177 1.6
2.5591 4.7244 1.2205 0.06 3.08 4.29 46,000 38,200 0.24 2.79 4.15 2.73 3,380 4,500 3.4
22213YM 65 120 31 1.5 78 109 204 170 1.6
2.5591 5.5118 1.8898 0.08 3.21 4.96 74,900 65,200 0.33 2.06 3.06 2.01 2,480 3,300 8
22313CJ 65 140 48 2 82 126 333 290 3.6
2.5591 5.5118 1.8898 0.08 3.21 4.96 74,900 65,200 0.33 2.06 3.06 2.01 2,480 3,300 8
22313YM* 65 140 48 2 82 126 333 290 3.6
2.7559 5.9055 1.378 0.08 3.46 5.43 54,000 46,700 0.23 2.9 4.31 2.83 2,000 2,900 6.4
21314VCSJ 70 150 35 2 88 138 240 208 2.9
2.7559 4.9213 1.2205 0.06 3.31 4.52 52,000 41,400 0.22 3.01 4.48 2.94 3,150 4,200 3.6
22214CJ 70 125 31 1.5 84 115 231 184 1.6
2.7559 5.9055 2.0079 0.08 3.41 5.15 86,500 74,300 0.34 2 2.98 1.96 2,400 3,200 9.7
22314CJ 70 150 51 2 87 131 385 331 4.4
2.7559 5.9055 2.0079 0.08 3.41 5.15 86,500 74,300 0.34 2 2.98 1.96 2,400 3,200 9.7
22314YM* 70 150 51 2 87 131 385 331 4.4
2.9528 6.2992 1.4567 0.08 3.7 5.83 61,600 53,200 0.23 2.94 4.37 2.87 1,900 2,700 7.7
21315VCSJ 75 160 37 2 94 148 274 236.5 3.5
2.9528 5.1181 1.2205 0.06 3.48 4.72 54,100 42,900 0.22 3.14 4.67 3.07 3,080 4,100 3.8
22215CJ 75 130 31 1.5 88 120 241 191 1.7
2.9528 6.2992 2.1654 0.08 3.66 5.51 102,400 87,100 0.34 2 2.98 1.96 2,250 3,000 11.9
22315CJ 75 160 55 2 93 140 455.5 387 5.4
2.9528 6.2992 2.1654 0.08 3.66 5.51 102,400 87,100 0.34 2 2.98 1.96 2,250 3,000 11.9
22315YM* 75 160 55 2 93 140 455.5 387 5.4
(1) (3)
These factors apply for both inch and metric calculations. See Engineering section for The limiting speeds shown in these tables are applicable under the following conditions:
instructions on use. 1) Cooling conditions are normal.
(2)
Maximum shaft or housing fillet radius which bearing corners will clear. 2) Bearing load is light C/R≥ 14.
* Available in standard shaker screen bearing design configuration 3) Calculated L10 is>100,000HR.
(example: 223xxYMW33W800C4) 4) Lubrication is proper and oil, if used, is at the recommended sump level.
For conditions other than above, bearing selection should be reviewed with a Timken sales
engineer.
269
270
C C
r r
r r
D D
d E d E
F F
CJ YM
271
272
C
C
r
r
r r
D D
d E d E
F F
CJ YM
273
274
C
C
r
r
r r
D D
d E d E
F F
CJ YM
DIMENSIONS – LOAD RATINGS
(1) (3)
Shoulder Diameter Load Ratings Equivalent Radial load Factors Limiting Speed
Bearing d D C r E F Static Dynamic Dynamic Static Grease Oil Wt.
(2)
Number Bore O.D. Width Fillet Shaft Housing Load Load
Radius Rating Rating
T ≤e T >e
In All Cases
(max.)
CO C
e
R
X=1
Y
R
X = .67
Y
Xo=1
YO (approx.)
2
in. in. in. in. in. in. lbs lbs lbs
mm mm mm mm mm mm kN kN rpm rpm kg
7.0866 12.5984 3.3858 0.12 8.37 11.34 346,400 231,100 0.27 2.54 3.78 2.48 1,260 1,680 65.00
22236CJ 180 320 86 3 213 288 1,541 1,028 30
7.0866 14.9606 4.9606 0.12 8.75 13.14 553,600 395,100 0.34 1.98 2.94 1.93 930 1,240 153.00
22336YM
180 380 126 3 222 334 2,462 1,757 69
7.0866 11.0236 2.9134 0.08 8.02 10.28 320,800 191,500 0.23 2.95 4.40 2.89 1,130 1,500 37.00
23036YM 180 280 74 2 204 261 1,416 851 17
7.0866 11.811 3.7795 0.10 8.07 10.76 406,400 247,200 0.31 2.20 3.28 2.15 930 1,240 60.00
23136YM 180 300 96 2.5 205 273 1,808 1,100 27
7.0866 12.5984 4.4094 0.12 8.22 11.34 473,200 297,900 0.34 2.00 2.97 1.95 820 1,090 85.00
23236YM
180 320 112 3 209 288 2,105 1,325 39
7.0866 14.9606 5.9055 0.12 8.74 13.02 690,700 455,900 0.41 1.65 2.46 1.62 800 1,060 182.00
23336YM 180 380 150 3 222 331 3,072 2,028 83
7.0866 9.8425 2.0472 0.08 7.74 9.26 201,700 109,200 0.18 3.69 5.50 3.61 1,470 1,960 17.00
23936YM
180 250 52 2 197 235 897 486 7.7
7.0866 11.0236 3.937 0.08 7.81 10.23 384,800 223,100 0.33 2.03 3.02 1.98 810 1,080 50.00
24036CJ 180 280 100 2 198 260 1,699 992 23
7.0866 11.811 4.6457 0.10 7.91 10.81 464,100 280,300 0.38 1.78 2.65 1.74 700 930 74.00
24136CJ 180 300 118 2.5 201 275 2,049 1,247 33
7.4803 13.3858 3.622 0.12 8.81 12.04 406,600 270,200 0.27 2.53 3.77 2.48 1,190 1,590 79.00
22238YM 190 340 92 3 224 306 1,809 1,202 36
7.4803 15.748 5.1969 0.16 9.29 13.78 614,400 427,900 0.34 1.97 2.94 1.93 890 1,180 177.00
22338YM 190 400 132 4 236 350 2,733 1,903 80
7.4803 11.4173 2.9528 0.08 8.40 10.68 349,200 202,600 0.22 3.01 4.48 2.94 1,080 1,440 39.00
23038YM 190 290 75 2 213 271 1,542 901 18
7.4803 12.5984 4.0945 0.10 8.57 11.43 470,300 282,000 0.31 2.15 3.21 2.11 880 1,170 75.00
23138YM 190 320 104 2.5 218 290 2,092 1,254 34
7.4803 13.3858 4.7244 0.12 8.71 12.03 536,400 335,000 0.34 1.99 2.96 1.95 770 1,030 104.00
23238YM 190 340 120 3 221 306 2,386 1,490 47
7.4803 15.748 6.1024 0.16 9.21 13.72 750,700 495,000 0.40 1.68 2.51 1.65 760 1,010 208.00
23338YM 190 400 155 4 234 348 3,339 2,202 95
7.4803 10.2362 2.0472 0.08 8.15 9.64 204,600 108,000 0.18 3.84 5.72 3.75 1,400 1,870 18.00
23938YM 190 260 52 2 207 245 910 480 8.1
(1) (3)
These factors apply for both inch and metric calculations. See Engineering section for The limiting speeds shown in these tables are applicable under the following conditions:
instructions on use. 1) Cooling conditions are normal.
(2)
Maximum shaft or housing fillet radius which bearing corners will clear. 2) Bearing load is light C/R≥ 14.
3) Calculated L10 is>100,000HR.
4) Lubrication is proper and oil, if used, is at the recommended sump level.
For conditions other than above, bearing selection should be reviewed with a Timken sales
engineer.
275
276
C
r
D
d E
F
YM
(max.) e Y Y YO (approx.)
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
lbs
kN
lbs
kN rpm rpm
lbs
kg
2
9.4488 14.1732 3.622 0.10 10.53 13.13 483,900 266,000 0.23 2.91 4.34 2.85 870 1,160 72.00
23048YM 240 360 92 2.5 267 334 2,152 1,183 33
9.4488 15.748 5.0394 0.12 10.85 14.34 719,400 414,700 0.30 2.28 3.40 2.23 700 930 142.00
23148YMB
240 400 128 3 276 364 3,200 1,845 65
9.4488 17.3228 6.2992 0.12 11.06 15.51 942,100 570,800 0.35 1.92 2.86 1.88 600 800 236.00
23248YM
240 440 160 3 281 394 4,190 2,539 107
9.4488 19.685 7.6772 0.16 11.54 17.22 1,195,000 760,700 0.40 1.67 2.49 1.64 600 800 407.00
23348YM 240 500 195 4 293 437 5,315 3,384 185
9.4488 12.5984 2.3622 0.08 10.24 11.93 306,100 149,700 0.16 4.19 6.24 4.09 1,130 1,510 29.00
23948YM
240 320 60 2 260 303 1,362 666 13
9.4488 14.1732 4.6457 0.10 10.44 13.13 657,200 338,000 0.29 2.31 3.44 2.26 620 830 92.00
24048YM 240 360 118 2.5 265 334 2,923 1,503 42
9.4488 15.748 6.2992 0.12 10.65 14.32 918,500 504,800 0.37 1.80 2.68 1.76 530 700 178.00
24148YM
240 400 160 3 271 364 4,085 2,245 81
10.2362 18.8976 5.1181 0.16 12.15 16.94 792,700 517,500 0.27 2.46 3.66 2.41 860 1,140 230.00
22252YM 260 480 130 4 309 430 3,526 2,302 104
10.2362 21.2598 6.4961 0.20 12.63 18.71 1,031,000 702,600 0.32 2.13 3.17 2.08 650 870 401.00
22352YMB
260 540 165 5 321 475 4,586 3,125 182
10.2362 15.748 4.0945 0.12 11.47 14.54 621,600 345,200 0.24 2.85 4.24 2.78 790 1,050 104.00
23052YM 260 400 104 3 291 369 2,765 1,535 47
10.2362 17.3228 5.6693 0.12 11.89 15.73 891,300 503,900 0.30 2.23 3.31 2.18 640 850 197.00
23152YMB 260 440 144 3 302 400 3,965 2,241 89
10.2362 18.8976 6.8504 0.16 12.13 16.93 1,098,000 657,800 0.34 1.98 2.95 1.94 550 730 307.00
23252YM 260 480 174 4 308 430 4,884 2,926 139
10.2362 21.2598 8.1102 0.20 12.50 18.62 1,358,000 860,600 0.39 1.71 2.54 1.67 560 740 501.00
23352YM 260 540 206 5 318 473 6,040 3,828 227
10.2362 14.1732 2.9528 0.08 11.18 13.33 421,900 213,900 0.18 3.74 5.56 3.65 1,020 1,360 50.00
23952YM 260 360 75 2 284 339 1,877 951 23
10.2362 15.748 5.5118 0.12 11.34 14.53 870,600 448,100 0.32 2.12 3.15 2.07 560 750 140.00
24052YM
260 400 140 3 288 369 3,872 1,993 64
(1) (3)
These factors apply for both inch and metric calculations. See Engineering section for The limiting speeds shown in these tables are applicable under the following conditions:
instructions on use. 1) Cooling conditions are normal.
(2)
Maximum shaft or housing fillet radius which bearing corners will clear. 2) Bearing load is light C/R≥ 14.
3) Calculated L10 is>100,000HR.
4) Lubrication is proper and oil, if used, is at the recommended sump level.
For conditions other than above, bearing selection should be reviewed with a Timken sales
engineer.
277
278
C
r
D
d E
F
YM
279
280
C
r
D
d E
F
YM
18.1102 26.7717 6.4173 0.20 20.14 24.83 1,722,000 840,000 0.22 3.06 4.56 2.99 460 610 443.6
23092YMB 460 680 163 5 512 631 7,659 3,736 201.6
23192YMB
18.1102
460
29.9213
760
9.4488
240
0.24
6
20.64
524
27.23
692
2,529,000
11,249
1,330,000
5,916
0.30 2.24 3.33 2.19 370 490 953.1
433.2
2
18.1102 32.6772 11.6535 0.24 21.07 29.36 3,187,000 1,770,000 0.34 1.96 2.93 1.92 320 420 1533.0
23292YMB 460 830 296 6 535 746 14,176 7,873 696.8
18.1102 24.4094 4.6457 0.12 19.86 22.9 1,057,000 460,400 0.16 4.13 6.15 4.04 320 640 221.3
23992BR 460 620 118 3 504 582 4,702 2,048 100.6
18.1102 26.7717 8.5827 0.20 19.98 24.82 2,349,000 1,068,000 0.28 2.37 3.53 2.32 330 440 593.3
24092YMB 460 680 218 5 507 630 10,448 4,750 269.7
18.1102 29.9213 11.8110 0.24 20.36 27.24 3,363,000 1,668,000 0.37 1.82 2.71 1.78 280 370 1191.4
24192YMB 460 760 300 6 517 692 14,959 7,419 541.6
18.8976 27.5591 6.4961 0.20 20.96 25.61 1,814,000 863,000 0.22 3.14 4.67 3.07 440 590 464.8
23096YMB 480 700 165 5 532 650 8,069 3,839 211.3
18.8976 31.1024 9.7638 0.24 21.54 28.31 2,827,000 1,456,000 0.30 2.26 3.36 2.21 350 470 1059.5
23196YMB 480 790 248 6 547 719 12,574 6,476 481.6
18.8976 34.2520 12.2047 0.24 22.08 30.66 3,736,000 2,010,000 0.35 1.92 2.85 1.87 300 400 1771.0
23296YMB 480 870 310 6 561 779 16,618 8,940 805.0
18.8976 25.5906 5.0394 0.16 20.56 24.16 1,220,000 559,300 0.17 3.86 5.75 3.78 305 610 266.8
23996BR 480 650 128 4 522 614 5,427 2,488 121.3
18.8976 27.5591 8.5827 0.20 20.73 25.67 2,472,000 1,118,000 0.28 2.45 3.64 2.39 320 420 614.1
24096YMB 480 700 218 5 527 652 10,995 4,973 279.1
18.8976 31.1024 12.1260 0.24 21.34 28.24 3,657,000 1,763,000 0.37 1.85 2.75 1.80 260 350 1315.8
24196YMB 480 790 308 6 542 717 16,266 7,842 598.1
19.6850 28.3465 6.5748 0.20 21.68 26.48 1,857,000 888,600 0.21 3.26 4.85 3.18 430 570 486.4
230/500YMB 500 720 167 5 551 673 8,260 3,952 221.1
19.6850 32.6772 10.3937 0.24 22.54 29.64 3,170,000 1,613,000 0.30 2.22 3.30 2.17 340 450 1257.3
231/500YMB 500 830 264 6 573 753 14,100 7,175 571.5
19.6850 36.2205 13.2283 0.24 23.04 32.41 4,069,000 2,228,000 0.36 1.90 2.83 1.86 290 380 2174.4
232/500YMB 500 920 336 6 585 823 18,099 9,910 988.4
19.6850 26.3780 5.0394 0.16 21.43 24.96 1,287,000 570,900 0.17 4.02 5.98 3.93 295 590 276.3
239/500BR 500 670 128 4 544 634 5,725 2,539 125.6
19.6850 28.3465 8.5827 0.20 21.52 26.47 2,539,000 1,132,000 0.27 2.51 3.74 2.45 310 410 634.9
240/500YMB 500 720 218 5 547 672 11,293 5,035 288.6
19.6850 32.6772 12.7953 0.24 22.16 29.72 3,989,000 1,960,000 0.37 1.81 2.69 1.77 260 340 1547.8
241/500YMB 500 830 325 6 563 755 17,743 8,718 703.6
20.8661 30.7087 7.2835 0.20 23.16 28.54 2,212,000 1,065,000 0.21 3.14 4.68 3.07 400 530 657.4
230/530YMB 530 780 185 5 588 725 9,839 4,737 298.8
(1) (3)
These factors apply for both inch and metric calculations. See Engineering section for The limiting speeds shown in these tables are applicable under the following conditions:
instructions on use. 1) Cooling conditions are normal.
(2) 2) Bearing load is light C/R≥ 14.
Maximum shaft or housing fillet radius which bearing corners will clear.
3) Calculated L10 is>100,000HR.
4) Lubrication is proper and oil, if used, is at the recommended sump level.
For conditions other than above, bearing selection should be reviewed with a Timken sales
engineer.
281
282
C
r
D
d E
F
YM
240/630YMB
mm
24.8031
mm
36.2205
mm
11.4173
mm
0.24
mm
27.22
mm
33.72
kN
4,242,000
kN
1,840,000 0.28 2.41 3.59 2.36
rpm
240
rpm
320
kg
1414.00
2
630 920 290 6 691 856 18,868 8,184 642
241/630YMB 24.8031 40.5512 15.748 0.24 27.83 36.96 6,267,000 2,917,000 0.37 1.84 2.74 1.80 200 270 2882.00
630 1030 400 6 707 939 27,876 12,975 1307
230/670YMB 26.3780 38.5827 9.0551 0.24 29.28 35.85 3,587,000 1,625,000 0.22 3.12 4.65 3.05 320 420 1277.00
670 980 230 6 744 911 15,955 7,228 579
231/670YMB 26.3780 42.9134 13.2283 0.24 29.94 39.19 5,337,000 2,610,000 0.29 2.31 3.44 2.26 260 340 2695.00
670 1090 336 6 760 995 23,739 11,609 1222
232/670YMD 26.3780 48.0315 17.2441 0.35 30.68 43.20 7,219,000 3,800,000 0.35 1.95 2.91 1.91 220 290 4940.00
670 1220 438 9 779 1097 32,110 16,902 2241
239/670YMB 26.3780 35.4331 6.6929 0.20 28.63 33.49 2,513,000 1,060,000 0.16 4.15 6.18 4.06 410 540 666.00
670 900 170 5 727 851 11,178 4,715 302
240/670YMB 26.3780 38.5827 12.126 0.24 29.04 35.82 4,958,000 2,087,000 0.28 2.39 3.55 2.33 230 300 1709.00
670 980 308 6 738 910 22,053 9,283 775
241/670YMD 26.3780 42.9134 16.2205 0.24 29.57 39.20 6,830,000 3,175,000 0.36 1.90 2.82 1.85 190 250 3305.00
670 1090 412 6 751 996 30,380 14,122 1499
230/710YMB 27.9528 40.5512 9.2913 0.24 30.90 37.81 3,795,000 1,726,000 0.21 3.26 4.86 3.19 300 400 1426.00
710 1030 236 6 785 960 16,880 7,677 647
231/710YMB 27.9528 45.2756 13.5827 0.28 31.84 41.25 5,880,000 2,802,000 0.28 2.38 3.54 2.32 240 320 3064.00
710 1150 345 7 809 1048 26,154 12,463 1390
232/710YMB 27.9528 50.3937 17.7165 0.35 32.58 45.23 8,029,000 4,095,000 0.34 1.97 2.93 1.93 200 270 5539.00
710 1280 450 9 828 1149 35,713 18,215 2512
239/710YMB 27.9528 37.4016 7.0866 0.20 30.35 35.34 2,816,000 1,158,000 0.16 4.13 6.15 4.04 380 510 778.00
710 950 180 5 771 898 12,526 5,151 353
240/710YMB 27.9528 40.5512 12.4016 0.24 30.67 37.78 5,258,000 2,221,000 0.27 2.49 3.71 2.44 220 290 1903.00
710 1030 315 6 779 960 23,388 9,879 863
241/710YMB 27.9528 45.2756 17.2441 0.28 31.29 41.35 7,722,000 3,520,000 0.36 1.87 2.78 1.83 180 240 3890.00
710 1150 438 7 795 1050 34,347 15,657 1764
230/750YMB 29.5276 42.9134 9.8425 0.24 32.68 39.98 4,266,000 1,923,000 0.21 3.26 4.85 3.18 290 380 1697.00
750 1090 250 6 830 1015 18,975 8,554 770
231/750YMB 29.5276 48.0315 14.3701 0.28 33.47 43.94 6,552,000 3,192,000 0.28 2.38 3.55 2.33 230 300 3667.00
750 1220 365 7 850 1116 29,143 14,198 1663
232/750YMB 29.5276 53.5433 18.7008 0.43 34.56 47.96 9,007,000 4,557,000 0.34 1.98 2.95 1.94 200 260 6634.00
750 1360 475 11 878 1218 40,063 20,270 3009
239/750YMB 29.5276 39.3701 7.2835 0.20 32.00 37.26 3,040,000 1,248,000 0.16 4.23 6.30 4.14 360 480 878.00
750 1000 185 5 813 946 13,522 5,551 398
(1) (3)
These factors apply for both inch and metric calculations. See Engineering section for The limiting speeds shown in these tables are applicable under the following conditions:
instructions on use. 1) Cooling conditions are normal.
(2) 2) Bearing load is light C/R≥ 14.
Maximum shaft or housing fillet radius which bearing corners will clear.
3) Calculated L10 is>100,000HR.
4) Lubrication is proper and oil, if used, is at the recommended sump level.
For conditions other than above, bearing selection should be reviewed with a Timken sales
engineer.
283
C
r
D
d E
F
YM
DIMENSIONS – LOAD RATINGS
(1) (3)
Shoulder Diameter Load Ratings Equivalent Radial load Factors Limiting Speed
Bearing d D C r E F Static Dynamic Dynamic Static Grease Oil Wt.
(2)
Number Bore O.D. Width Fillet Shaft Housing Load Load
Radius Rating Rating
T ≤e T >e
In All Cases
R R
CO C Xo=1
X=1 X = .67
(max.) e Y Y YO (approx.)
in. in. in. in. in. in. lbs lbs lbs
mm mm mm mm mm mm kN kN rpm rpm kg
241/950YMB
37.4016
950
39.3701
59.0551
1500
55.9055
21.4567
545
12.1260
0.35
9.0
0.24
41.89
1064
43.36
53.99
1371
52.23
12,845,000
57,135
7,218,000
5,412,000
24,073
3,010,000
0.34
0.20
2.00
3.44
2.97
5.12
1.95
3.36
140
220
180
290
7968.75
3622.16
3396.9
2
230/1000YMB 1000 1420 308 6 1101 1327 32,106 13,388 1544.0
39.3701 62.2047 18.1890 0.35 44.54 56.92 11,132,000 4,935,000 0.27 2.47 3.68 2.42 170 230 7501.6
231/1000YMB 1000 1580 462 9 1131 1446 49,515 21,951 3409.8
39.3701 51.9685 9.2913 0.24 42.53 49.28 5,186,000 2,027,000 0.15 4.39 6.54 4.29 270 360 1901.1
239/1000YMB 1000 1320 236 6 1080 1252 23,067 9,016 864.1
39.3701 55.9055 16.2205 0.24 43.06 52.33 9,387,000 3,729,000 0.25 2.69 4.01 2.63 150 200 4543.9
240/1000YMB 1000 1420 412 6 1094 1329 41,753 16,587 2065.4
39.3701 62.2047 22.8346 0.35 44.08 56.85 14,475,000 6,031,000 0.34 1.98 2.95 1.93 130 170 9417.6
241/1000YMB 1000 1580 580 9 1120 1444 64,385 26,826 4280.7
41.7323 59.0551 12.7953 0.28 45.87 55.26 8,048,000 3,331,000 0.20 3.44 5.12 3.36 200 270 3972.3
230/1060YMB 1060 1500 325 7 1165 1404 35,798 14,816 1805.6
41.7323 65.3543 18.7008 0.43 46.99 60.01 12,036,000 5,328,000 0.27 2.53 3.77 2.48 170 220 8411.6
231/1060YMB 1060 1660 475 11 1194 1524 53,536 23,699 3823.5
41.7323 55.1181 9.8425 0.24 45.06 52.27 5,952,000 2,304,000 0.16 4.25 6.32 4.15 260 340 2268.9
239/1060YMB 1060 1400 250 6 1145 1328 26,474 10,248 1031.3
41.7323 59.0551 17.2441 0.28 45.55 55.23 11,131,000 4,280,000 0.26 2.61 3.88 2.55 140 190 5353.4
240/1060YMB 1060 1500 438 7 1157 1403 49,511 19,037 2433.4
44.0945 62.2047 13.5827 0.28 48.37 58.28 9,038,000 3,705,000 0.20 3.42 5.09 3.34 200 260 4649.5
230/1120YMB 1120 1580 345 7 1229 1480 40,201 16,480 2113.4
44.0945 68.8976 18.7008 0.43 49.67 63.34 12,606,000 5,616,000 0.25 2.67 3.98 2.62 160 210 9319.3
231/1120YMB 1120 1750 475 11 1262 1609 56,071 24,980 4236.0
44.0945 57.4803 9.8425 0.24 47.43 54.70 6,094,000 2,333,000 0.15 4.62 6.87 4.51 250 330 2379.6
239/1120YMB 1120 1460 250 6 1205 1389 27,106 10,377 1081.6
44.0945 62.2047 18.1890 0.28 48.05 58.25 12,505,000 4,760,000 0.26 2.62 3.90 2.56 140 180 6226.3
240/1120YMB 1120 1580 462 7 1220 1480 55,622 21,172 2830.1
46.4567 65.3543 13.9764 0.28 50.89 61.31 9,782,000 4,000,000 0.19 3.50 5.21 3.42 180 240 5251.1
230/1180YMB 1180 1660 355 7 1293 1557 43,510 17,792 2386.9
46.4567 72.8346 19.6850 0.43 52.45 66.87 14,034,000 6,204,000 0.25 2.68 4.00 2.62 150 200 11014.2
231/1180YMB 1180 1850 500 11 1332 1698 62,423 27,595 5006.4
46.4567 60.6299 10.7087 0.24 49.98 57.67 7,087,000 2,665,000 0.15 4.48 6.67 4.38 230 310 2890.0
239/1180YMB 1180 1540 272 6 1269 1465 31,523 11,854 1313.7
46.4567 65.3543 18.7008 0.28 50.56 61.28 13,438,000 5,114,000 0.25 2.67 3.98 2.61 130 170 7026.2
240/1180YMB 1180 1660 475 7 1284 1557 59,772 22,747 3193.7
49.2126 68.8976 14.7638 0.28 53.95 64.57 10,970,000 4,352,000 0.19 3.50 5.21 3.42 170 230 6103.6
230/1250YMB 1250 1750 375 7 1370 1640 48,795 19,358 2774.4
49.2126 76.7717 20.8661 0.43 55.38 70.62 15,747,000 6,895,000 0.25 2.67 3.98 2.62 140 190 12882.2
231/1250YMB 1250 1950 530 11 1407 1794 70,043 30,669 5855.5
49.2126 64.1732 11.0236 0.24 52.94 61.07 7,679,000 2,886,000 0.15 4.60 6.85 4.50 220 290 3325.1
239/1250YMB 1250 1630 280 6 1345 1551 34,156 12,837 1511.4
49.2126 68.8976 19.6850 0.28 53.62 64.53 14,985,000 5,534,000 0.25 2.68 3.99 2.62 130 170 8138.2
240/1250YMB 1250 1750 500 7 1362 1639 66,653 24,615 3699.2
(1) (3)
These factors apply for both inch and metric calculations. See Engineering section for The limiting speeds shown in these tables are applicable under the following conditions:
instructions on use. 1) Cooling conditions are normal.
(2) 2) Bearing load is light C/R≥ 14.
Maximum shaft or housing fillet radius which bearing corners will clear.
3) Calculated L10 is>100,000HR.
4) Lubrication is proper and oil, if used, is at the recommended sump level.
For conditions other than above, bearing selection should be reviewed with a Timken sales
engineer.
285
286
287
REMOVAL
NUT
Tapered bore bearing mounted with push type removable sleeve
SERIES 222K
Bearing Accessory Numbers Dimensions
Number Shaft Sleeve Dimensions Sleeve
Sleeve Locknut Lockwasher Removal B L a C Weight
Lockplate Nut Diameter Tolerance Pitch Diam. Removal Nut
d +.000 O.D.
22216K SK-8022 N-14 W-14 AN-18 2.7559 –.004 3.472 1.969 0.138 4.661 1.25
70 –.10 88.19 50 3.5 118.39 0.57
22217K SK-8522 AN-15 W-15 AN-19 2.9528 –.004 3.675 2.047 0.138 4.943 1.44
75 –.10 93.35 52 3.5 125.55 0.65
22218K SK-9022 AN-16 W-16 AN-20 3.1496 –.004 3.863 2.087 0.138 5.193 1.53
80 –10 98.12 53 3.5 131.90 0.69
22219K SK-9522 AN-17 W-17 AN-21 3.3465 –.004 4.066 2.244 0.157 5.443 1.81
85 –.10 103.28 57 4.0 138.25 0.82
22220K SK-10022 AN-18 W-18 AN-22 3.5433 –.004 4.269 2.323 0.157 5.724 2.00
90 –.10 109.12 59 4.0 145.39 0.91
22222K SK-11022 AN-20 W-20 ARN-22 3.9370 –.004 4.722 2.559 0.157 6.250 2.47
100 –.10 119.94 65 4.0 158.75 1.12
22224K SK-12022 AN-22 W-22 ARN-24 4.3307 –.005 5.129 2.835 0.157 6.875 3.13
110 –.13 130.28 72 4.0 174.63 1.42
22226K SK-13022 AN-22 W-22 ARN-26 4.5276 –.005 5.566 3.071 0.157 7.250 5.00
115 –.13 141.38 78 4.0 184.15 2.27
22228K SK-14022 AN-24 W-24 RN-28 4.9213 –.005 6.013 3.228 0.197 7.875 5.88
125 –.13 152.73 82 5.0 200.03 2.67
22230K SK-15022 AN-26 W-26 RN-30 5.3150 –.005 6.419 3.465 0.197 8.250 6.81
135 –.13 163.04 88 5.0 209.55 3.09
22232K SK-16022 AN-28 W-28 RN-32 5.5118 –.005 6.841 3.780 0.197 8.875 9.94
140 –.13 173.76 96 5.0 225.43 4.51
22234K SK-17022 AN-30 W-30 RN-34 5.9055 –.005 7.247 4.095 0.197 9.250 11.50
150 –.13 184.07 104 5.0 234.95 5.22
22236K SK-18022 AN-32 W-32 RN-36 6.2992 –.005 7.669 4.095 0.197 9.750 12.50
160 –.13 194.79 104 5.0 247.65 5.67
22238K SK-19022 AN-34 W-34 RN-38 6.6929 –.005 8.107 4.409 0.197 10.625 14.50
170 –.13 205.92 112 5.0 269.88 6.58
22240K SK-20022 AN-36 W-36 N-44 7.0866 –.005 8.544 4.646 0.197 11.005 16.37
180 –.13 217.02 118 5.0 279.53 7.43
22244K SK-22022 AN-40 W-40 N-048 7.8740 –.005 9.330 5.118 0.236 11.443 19.60
200 –.13 236.98 130 6.0 290.65 8.89
22248K SK-24022 N-44 W-44 N-052 8.6614 –.006 10.080 5.669 0.236 12.193 24.30
220 –.15 256.03 144 6.0 309.70 11.02
22252K SK-26022 N-048 P-48 N-056 9.4488 –.006 10.892 6.102 0.236 13.005 30.90
240 –.15 276.66 155 6.0 330.33 14.02
22256K SK-28022 N-052 P-52 RN-56 10.2362 –.006 11.861 6.102 0.315 16.75 33.10
260 –.15 301.27 155 8.0 425.45 15.01
22260K SK-30022 N-056 P-56 RN-60 11.0236 –.006 12.830 6.693 0.315 16.382 39.20
280 –.15 325.88 170 8.0 416.10 17.78
22264K SK-32022 N-060 P-60 RN-64 11.8110 –.006 13.611 7.087 0.394 17.000 46.30
300 –.15 345.72 180 10.0 431.80 21.00
288
SERIES 223K
Bearing Accessory Numbers Dimensions
Number Shaft Sleeve Dimensions Sleeve
Sleeve Locknut Lockwasher Removal B L a C Weight
Lockplate Nut Diameter Tolerance Pitch Diam. Removal Nut
d +.000 O.D.
22308K SK-4023 N-07 W-07 N-09 1.3780 –.003 1.730 1.575 0.118 2.536 0.25
35 –.08 43.94 40 3.0 64.41 0.11
22309K SK-4523 N-08 W-08 N-10 1.5748 –.003 1.930 1.732 0.118 2.693 0.31
40 –.08 49.02 44 3.0 68.40 0.14
22310K
22311K
SK-5023
SK-5523
N-09
N-10
W-09
W-10
RN-10
RN-11
1.7717
45
1.9685
–.003
–.08
–.003
2.167
55.04
2.370
1.969
50
2.126
0.118
3.0
0.118
3.000
76.20
3.219
0.47
0.21
0.56
2
50 –.08 60.20 54 3.0 81.76 0.25
22312K SK-6023 N-11 W-11 RN-12 2.1654 –.004 2.589 2.244 0.138 3.438 0.69
55 –.10 65.76 57 3.5 87.33 0.31
22313K SK-6523 N-12 W-12 AN-15 2.3622 –.004 2.878 2.402 0.138 3.880 0.84
60 –.10 73.10 61 3.5 98.55 0.38
22314K SK-7023 N-12 W-12 AN-16 2.3622 –.004 3.082 2.559 0.138 4.161 1.53
60 –.10 78.28 65 3.5 105.69 0.69
22315K SK-7523 N-13 W-13 AN-17 2.5591 –.004 3.285 2.717 0.138 4.411 1.78
65 –.10 83.44 69 3.5 112.04 0.81
22316K SK-8023 N-14 W-14 AN-18 2.7559 –.004 3.472 2.835 0.138 4.661 2.00
70 –.10 88.19 72 3.5 118.39 0.91
22317K SK-8523 AN-15 W-15 AN-19 2.9528 –.004 3.675 2.953 0.138 4.943 2.25
75 –.10 93.35 75 3.5 125.55 1.02
22318K SK-9023 AN-16 W-16 AN-20 3.1496 –.004 3.863 3.150 0.138 5.193 2.56
80 –10 98.12 80 3.5 131.90 1.16
22319K SK-9523 AN-17 W-17 AN-21 3.3465 –.004 4.066 3.346 0.157 5.443 2.94
85 –.10 103.28 85 4.0 138.25 1.33
22320K SK-10023 AN-18 W-18 AN-22 3.5433 –.004 4.269 3.543 0.157 5.724 3.38
90 –.10 109.12 90 4.0 145.39 1.53
22322K SK-11023 AN-20 W-20 ARN-22 3.9370 –.004 4.722 3.858 0.157 6.250 4.25
100 –.10 119.94 98 4.0 158.75 1.93
22324K SK-12023 AN-22 W-22 ARN-24 4.3307 –.005 5.129 4.134 0.157 6.875 5.00
110 –.13 130.28 105 4.0 174.63 2.27
22326K SK-13023 AN-22 W-22 ARN-26 4.5276 –.005 5.566 4.528 0.157 7.250 8.00
115 –.13 141.38 115 4.0 184.15 3.63
22328K SK-14023 AN-24 W-24 RN-28 4.9213 –.005 6.013 4.921 0.197 7.875 9.50
125 –.13 152.73 125 5.0 200.03 4.31
22330K SK-15023 AN-26 W-26 RN-30 5.3150 –.005 6.419 5.315 0.197 8.250 11.43
135 –.13 163.04 135 5.0 209.55 5.18
22332K SK-16023 AN-28 W-28 RN-32 5.5118 –.005 6.841 5.512 0.236 8.875 15.50
140 –.13 173.76 140 6.0 225.43 7.03
22334K SK-17023 AN-30 W-30 RN-34 5.9055 –.005 7.247 5.748 0.236 9.250 17.25
150 –.13 184.07 146 6.0 234.95 7.82
22336K SK-18023 AN-32 W-32 RN-36 6.2992 –.005 7.669 6.063 0.236 9.750 20.25
160 –.13 194.79 154 6.0 247.65 9.19
22338K SK-19023 AN-34 W-34 RN-38 6.6929 –.005 8.107 6.299 0.276 10.625 22.12
170 –.13 205.92 160 7.0 269.88 10.03
22340K SK-20023 AN-36 W-36 N-44 7.0866 –.005 8.544 6.693 0.276 11.005 25.25
180 –.13 217.02 170 7.0 279.53 11.45
22344K SK-22023 AN-40 W-40 N-048 7.8740 –.005 9.330 7.126 0.315 11.443 29.50
200 –.13 236.98 181 8.0 290.65 13.38
22348K SK-24023 N-44 W-44 N-052 8.6614 –.006 10.080 7.441 0.315 12.193 34.20
220 –.15 256.03 189 8.0 309.70 15.51
22352K SK-26023 N-048 P-48 N-056 9.4488 –.006 10.892 7.874 0.315 13.005 40.25
240 –.15 276.66 200 8.0 330.33 18.26
22356K SK-28023 N-052 P-52 RN-56 10.2362 –.006 11.861 8.268 0.394 16.75 48.50
260 –.15 301.27 210 10.0 425.45 22.00
289
inch inch inch inch inch inch inch inch inch inch inch inch inch inch inch inch inch inch
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
1 3 1 3 3 1 1 1
35 N 07 W 07 18 1.376 1.3678 1.3399 1.3359 1.3078 1.2922 1 ⁄4 ⁄32 ⁄2 ⁄32 ⁄16 ⁄8 2 ⁄16 0.448 0.050 1.416 2 ⁄4 0.176
34.95 34.74 34.03 33.93 33.22 32.82 31.75 2.4 12.7 2.4 4.8 3.2 52.39 11.4 1.3 36.0 57.2 4.5
7 1 17 3 5 1 1 15
40 N 08 W 08 18 1.563 1.5548 1.5269 1.5224 1.4948 1.4792 1 ⁄16 ⁄8 ⁄32 ⁄32 ⁄16 ⁄8 2 ⁄4 0.448 0.058 1.603 2 ⁄32 0.290
39.7 39.49 38.78 38.67 37.97 37.57 36.51 3.2 13.5 2.4 7.9 3.2 57.15 11.4 1.5 40.7 62.7 7.4
11 1 17 3 5 5 17 47
45 N 09 W 09 18 1.767 1.7588 1.7309 1.7264 1.6988 1.6832 1 ⁄16 ⁄8 ⁄32 ⁄32 ⁄16 ⁄32 2 ⁄32 0.448 0.058 1.817 2 ⁄64 0.290
44.88 44.67 43.96 43.85 43.15 42.75 42.86 3.2 13.5 2.4 7.9 4.0 64.3 11.4 1.5 46.2 69.5 7.4
7 1 19 3 5 5 11 59
50 N 10 W 10 18 1.967 1.9588 1.9309 1.9264 1.8988 1.8832 1 ⁄8 ⁄8 ⁄32 ⁄32 ⁄16 ⁄32 2 ⁄16 0.510 0.058 2.017 2 ⁄64 0.290
49.96 49.75 49.05 48.93 48.23 47.83 47.63 3.2 15.1 2.4 7.9 4.0 68.3 13.0 1.5 51.2 74.2 7.4
1 1 19 1 5 5 31 7
55 N 11 W 11 18 2.157 2.1488 2.1209 2.1158 2.0888 2.0732 2 ⁄16 ⁄8 ⁄32 ⁄8 ⁄16 ⁄32 2 ⁄32 0.510 0.063 2.207 3 ⁄64 0.290
54.79 54.58 53.87 53.74 53.06 52.66 52.39 3.2 15.1 3.2 7.9 4.0 75.4 13.0 1.6 56.1 79.0 7.4
1 1 5 1 5 5 5 11
60 N 12 W 12 18 2.360 2.3518 2.3239 2.3188 2.2918 2.2762 2 ⁄4 ⁄8 ⁄8 ⁄8 ⁄16 ⁄32 3 ⁄32 0.541 0.063 2.425 3 ⁄32 0.290
59.94 59.74 59.03 58.90 58.21 57.82 57.15 3.2 15.9 3.2 7.9 4.0 80.2 13.7 1.6 61.6 85.0 7.4
7 1 21 1 5 5 3 37
65 N 13 W 13 18 2.548 2.5398 2.5119 2.5068 2.4798 2.4642 2 ⁄16 ⁄8 ⁄32 ⁄8 ⁄16 ⁄32 3 ⁄8 0.573 0.063 2.613 3 ⁄64 0.290
64.72 64.51 63.80 63.67 62.99 62.59 61.91 3.2 16.7 3.2 7.9 4.0 85.7 14.6 1.6 66.4 90.9 7.4
5 1 21 1 5 1 5 53
70 N 14 W 14 18 2.751 2.7428 2.7149 2.7098 2.6828 2.6672 2 ⁄8 ⁄8 ⁄32 ⁄8 ⁄16 ⁄4 3 ⁄8 0.573 0.063 2.816 3 ⁄64 0.290
69.88 69.67 68.96 68.83 68.14 67.75 66.68 3.2 16.7 3.2 7.9 6.4 92.1 14.6 1.6 71.5 97.2 7.4
13 5 11 1 5 1 7 7
75 AN 15 W 15 12 2.933 2.9218 2.8789 2.8735 2.8308 2.7995 2 ⁄16 ⁄32 ⁄16 ⁄8 ⁄16 ⁄4 3 ⁄8 0.604 0.072 3.003 4 ⁄64 0.290
74.50 74.21 73.12 72.99 71.90 71.11 71.44 4.0 17.5 3.2 7.9 6.4 98.4 15.3 1.6 76.3 104.4 7.4
5 11 1 3 1 5 3
80 AN 16 W 16 12 3.137 3.1258 3.0829 3.0770 3.0348 3.0035 3 ⁄32 ⁄16 ⁄8 ⁄8 ⁄4 4 ⁄32 0.604 0.072 3.207 4 ⁄8 0.353
79.68 79.40 78.31 78.16 77.08 76.29 76.20 4.0 17.5 3.2 9.5 6.4 105.6 15.3 1.8 81.5 111.1 9.0
3 5 21 1 3 1 13 5
85 AN 17 W 17 12 3.340 3.3288 3.2859 3.2800 3.2378 3.2065 3 ⁄16 ⁄32 ⁄32 ⁄8 ⁄8 ⁄4 4 ⁄32 0.635 0.072 3.425 4 ⁄8 0.353
84.84 84.55 83.46 83.31 82.24 81.45 80.96 4.0 16.7 3.2 9.5 6.4 111.9 16.1 1.8 87.0 117.5 9.0
3 5 13 5 3 1 21 15
90 AN 18 W 18 12 3.527 3.5158 3.4729 3.4655 3.4248 3.3935 3 ⁄8 ⁄32 ⁄16 ⁄32 ⁄8 ⁄4 4 ⁄32 0.698 0.094 3.612 4 ⁄16 0.353
89.59 89.30 88.21 88.02 86.99 86.20 85.73 4.0 20.6 4.0 9.5 6.4 118.3 17.7 2.4 91.7 125.4 9.0
9 5 27 5 3 1 15 7
95 AN 19 W 19 12 3.730 3.7188 3.6759 3.6685 3.6278 3.5965 3 ⁄16 ⁄32 ⁄32 ⁄32 ⁄8 ⁄4 4 ⁄16 0.729 0.094 3.830 5 ⁄32 0.353
94.74 94.46 93.37 93.18 92.15 91.35 90.49 4.0 21.4 4.0 9.5 6.4 125.4 18.5 2.4 97.3 132.6 9.0
13 5 7 5 3 5 3 1
100 AN 20 W 20 12 3.918 3.9068 3.8639 3.8565 3.8158 3.7845 3 ⁄16 ⁄32 ⁄8 ⁄32 ⁄8 ⁄16 5 ⁄16 0.760 0.094 4.018 5 ⁄2 0.353
99.52 99.23 98.14 97.96 96.92 96.13 96.84 4.0 22.2 4.0 9.5 7.9 131.8 19.3 2.4 102.1 139.7 9.0
15 5 7 5 3 5 7 45
105 AN 21 W 21 12 4.122 4.1108 4.0679 4.0596 4.0198 3.9885 3 ⁄16 ⁄32 ⁄8 ⁄32 ⁄8 ⁄16 5 ⁄16 0.760 0.094 4.222 5 ⁄64 0.353
104.70 104.41 103.32 103.11 102.10 101.31 100.01 4.0 22.2 4.0 9.5 7.9 138.1 19.3 2.4 107.2 144.9 9.0
3 5 29 3 3 5 23 1
110 AN 22 W 22 12 4.325 4.3138 4.2709 4.2626 4.2228 4.1915 4 ⁄16 ⁄32 ⁄32 ⁄16 ⁄8 ⁄16 5 ⁄32 0.791 0.125 4.425 6 ⁄16 0.353
109.86 109.57 108.48 108.27 107.26 106.46 106.36 4.0 23.0 4.8 9.5 7.9 145.3 20.1 3.2 112.4 154.0 9.0
9 5 15 3 3 5 1 15
120 AN 24 W 24 12 4.716 4.7048 4.6619 4.6536 4.6138 4.5825 4 ⁄16 ⁄32 ⁄16 ⁄16 ⁄8 ⁄16 6 ⁄8 0.823 0.125 4.831 6 ⁄32 0.353
119.79 119.50 118.41 118.2 117.19 116.40 115.89 4.0 23.8 4.8 9.5 7.9 155.6 20.9 3.2 122.7 164.3 9.0
15 5 3 1 5 3 1
130 AN 26 W 26 12 5.106 5.0948 5.0519 5.0436 5.0038 4.9725 4 ⁄16 ⁄32 1 ⁄16 ⁄2 ⁄16 6 ⁄4 0.885 0.125 5.226 7 ⁄32 0.435
129.69 129.41 128.32 128.11 127.10 126.30 125.41 4.0 25.4 4.8 12.7 7.9 171.5 22.5 3.2 132.7 178.6 11.1
5 5 1 3 5 5 3 7
140 AN 28 W 28 12 5.497 5.4858 5.4429 5.4346 5.3948 5.3635 5 ⁄16 ⁄32 1 ⁄16 ⁄16 ⁄8 ⁄16 7 ⁄32 0.948 0.125 5.617 7 ⁄16 0.590
139.62 139.34 138.25 138.04 137.03 136.23 134.94 4.0 27.0 4.8 15.9 7.9 180.2 24.1 3.2 142.7 188.9 15.0
3 5 1 7 5 3 11 1
150 AN 30 W 30 12 5.888 5.8768 5.8339 5.8256 5.7858 5.7545 5 ⁄4 ⁄32 1 ⁄8 ⁄32 ⁄8 ⁄8 7 ⁄16 0.979 0.156 6.018 8 ⁄16 0.590
149.56 149.27 148.18 147.97 146.96 146.16 146.05 4.0 28.6 5.6 15.9 9.5 195.3 24.9 4.0 152.9 204.8 15.0
1 1 3 15 5 3 1 7
160 AN 32 W 32 8 6.284 6.2688 6.2028 6.1937 6.1306 6.0993 6 ⁄16 ⁄4 1 ⁄16 ⁄64 ⁄8 ⁄8 8 ⁄16 1.041 0.156 6.424 8 ⁄16 0.590
159.61 159.23 157.55 157.32 155.72 154.92 153.99 6.4 30.2 6.0 15.9 9.5 204.8 26.4 4.0 163.2 214.3 15.0
7 1 7 15 3 3 21 1
170 AN 34 W 34 8 6.659 6.6438 6.5778 6.5687 6.5056 6.4743 6 ⁄16 ⁄4 1 ⁄32 ⁄64 ⁄4 ⁄8 8 ⁄32 1.073 0.156 6.799 9 ⁄16 0.715
169.14 168.75 167.08 166.85 165.24 164.45 163.51 6.4 31.0 6.0 19.1 9.5 219.9 27.3 4.0 172.7 230.2 18.2
7 1 15 3 3 1 7
180 AN 36 W 36 8 7.066 7.0508 6.9848 6.9757 6.9126 6.8813 6 ⁄8 1⁄4 1 ⁄4 ⁄64 ⁄4 ⁄8 9 ⁄16 1.104 0.156 7.206 9 ⁄16 0.715
179.48 179.09 177.41 177.18 175.58 174.79 174.63 6.4 31.8 6.0 19.1 9.5 230.2 28.0 4.0 183.0 239.7 18.2
1 1 9 15 3 3 15 7
190 AN 38 W 38 8 7.472 7.4568 7.3908 7.3817 7.3186 7.2873 7 ⁄4 ⁄4 1 ⁄32 ⁄64 ⁄4 ⁄8 9 ⁄32 1.135 0.156 7.612 9 ⁄8 0.715
189.79 189.40 187.73 187.50 185.89 185.10 184.15 6.4 32.5 6.0 19.1 9.5 240.5 28.8 4.0 193.3 250.8 18.2
5 1 11 15 3 27 5
200 AN 40 W 40 8 7.847 7.8318 7.7658 7.7544 7.6936 7.6623 7 ⁄8 ⁄4 1 ⁄32 ⁄64 7⁄8 ⁄8 9 ⁄32 1.198 0.156 8.017 10 ⁄16 0.840
199.31 198.93 197.25 196.96 195.42 194.62 193.68 6.4 34.1 6.0 22.2 9.5 250.0 30.4 4.0 203.6 261.9 21.3
5 1 3 3 1 3 7
220 N 44 W 44 8 8.628 8.6128 8.5468 8.5347 8.4746 8.4433 8 ⁄16 ⁄4 1 ⁄8 ⁄8 1 ⁄16 ⁄8 11 1.250 0.125 8.703 11 ⁄16 0.940
219.15 218.77 217.09 216.78 215.25 214.46 211.14 6.4 34.9 9.5 27.0 9.5 279.4 31.8 3.2 221.1 290.5 23.9
(1)
See page 305 for recommended S-3 shaft tolerances.
290
H
M
1
D
16 DIA. SOFT IRON WIRE
( "R" LONG )
C1
The table below shows dimensions for locknuts, lockplates used in A S-3
the mounting of straight bore bearings on shafts.
Other dimensions and tolerances related to shaft configurations *1
4
are also shown. L H
1
Dimensions are presented according to bearing bore size and are (2)
C + D + 16
applicable to bearings in the various series (i.e., 222, 223 etc.) 3
* Sizes N670 and above : 8
inch inch inch inch inch inch inch inch inch inch inch inch inch inch inch inch inch
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
3 11 7 1 3 7 11 3 45
240 N 048 P 48 6 9.442 9.4218 9.3337 9.3213 9.2374 9.1905 9 ⁄16 1 ⁄16 ⁄16 1 ⁄8 1 ⁄8 11 ⁄16 1 ⁄32 0.885 ⁄8 8 1 ⁄64
239.83 239.31 237.08 236.76 234.63 233.44 233.36 42.86 11.1 28.6 34.9 290.5 34.1 22.48 9.5 203.2 43.26
15 25 7 3 15 3 13 3 49
260 N 052 P 52 6 10.192 10.1718 10.0837 10.0707 9.9874 9.9405 9 ⁄16 1 ⁄32 ⁄16 1 ⁄16 1 ⁄32 12 ⁄16 1 ⁄32 0.885 ⁄8 9 1 ⁄64
258.88 258.36 256.13 255.8 253.68 252.49 252.41 45.24 11.1 30.2 37.3 309.6 35.7 22.48 9.5 228.6 44.85
3 7 7 1 9 1 3 55
280 N 056 P 56 6 11.004 10.9838 10.8957 10.8827 10.7994 10.7525 10 ⁄4 1 ⁄8 ⁄16 1 ⁄4 1 ⁄16 13 1 ⁄2 1.010 ⁄8 9 1 ⁄64
279.50 278.99 276.75 276.42 274.31 273.11 273.05 47.63 11.1 31.8 39.7 330.2 38.1 25.65 9.5 228.6 47.23
1 15 7 3 5 3 9 1 31
300 N 060 P 60 6 11.785 11.7648 11.6767 11.6637 11.5804 11.5335 11 ⁄2 1 ⁄16 ⁄16 1 ⁄8 1 ⁄8 14 ⁄16 1 ⁄16 1.010 ⁄2 10 1 ⁄32
299.34 298.83 296.59 296.26 294.14 292.95 292.1 49.21 11.1 34.9 41.3 360.4 39.7 25.65 12.7 254.0 50.01
5 1 7 7 23 21 1 1
320 N 064 P 64 6 12.562 12.5418 12.4537 12.4402 12.3574 12.3105 12 ⁄16 2 ⁄32 ⁄16 1 ⁄16 1 ⁄32 15 1 ⁄32 1.010 ⁄2 10 2 ⁄16
340 N 068 P 68 5
319.08
13.303
318.56
13.287
316.32
13.203
315.98
13.187
313.88
13.083
312.69
13.036
312.74
1
13 ⁄16
51.59
7
2 ⁄32
11.1
7
⁄16
36.5
1
1 ⁄2
43.7
29
1 ⁄32
381.0
15 ⁄4
3
1
42.1
25
⁄32
25.65
1.010
12.7
1
⁄2
254.0
11
52.39
3
2 ⁄16
2
337.90 337.49 335.36 334.95 332.31 331.11 331.79 56.36 11.1 38.1 48.4 400.1 45.2 25.65 12.7 279.4 55.56
13 7 1 1 29 1 25 1 3
360 N 072 P 72 5 14.134 14.118 14.034 14.018 13.914 13.867 13 ⁄16 2 ⁄32 ⁄2 1 ⁄2 1 ⁄32 16 ⁄2 1 ⁄32 1.260 ⁄2 11 2 ⁄16
359.00 358.60 356.46 356.06 353.42 352.22 350.84 56.36 12.7 38.1 48.4 419.1 45.2 32.00 12.7 279.4 55.56
5 11 1 1 1 3 29 19 13
380 N 076 P 76 5 14.921 14.905 14.821 14.805 14.701 14.654 14 ⁄8 2 ⁄32 ⁄2 1 ⁄2 2 ⁄32 17 ⁄4 1 ⁄32 1.260 ⁄32 12 2 ⁄32
378.99 378.59 376.45 376.05 373.41 372.21 371.48 59.53 12.7 38.1 51.59 450.9 48.4 32.00 15.1 304.8 61.12
3 1 1 5 3 1 1 19 9
400 N 080 P 80 5 15.709 15.693 15.609 15.593 15.489 15.442 15 ⁄8 2 ⁄2 ⁄2 1 ⁄8 2 ⁄16 18 ⁄2 2 ⁄16 1.260 ⁄32 13 2 ⁄16
399.01 398.60 396.47 396.06 393.42 392.23 390.53 63.50 12.7 41.3 55.6 469.9 52.4 32.00 15.1 330.2 65.09
3 1 1 5 3 5 1 19 9
420 N 084 P 84 5 16.496 16.480 16.396 16.380 16.276 16.229 16 ⁄16 2 ⁄2 ⁄2 1 ⁄8 2 ⁄16 19 ⁄16 2 ⁄16 1.385 ⁄32 13 2 ⁄16
419.00 418.59 416.46 416.05 413.41 412.22 411.16 63.50 12.7 41.3 55.6 490.5 52.4 35.18 15.1 330.2 65.09
13 1 13 1 1 3 19 31
440 N 088 P 88 5 17.283 17.267 17.183 17.167 17.063 17.016 17 2 ⁄16 ⁄2 1 ⁄16 2 ⁄2 20 ⁄2 2 ⁄8 1.385 ⁄32 14 2 ⁄32
438.99 438.58 436.45 436.05 433.40 432.21 431.80 71.44 12.7 46.0 63.50 520.7 60.3 35.18 15.1 355.6 75.41
3 13 1 13 1 1 3 19 31
460 N 092 P 92 5 18.071 18.055 17.971 17.955 17.851 17.804 17 ⁄4 2 ⁄16 ⁄2 1 ⁄16 2 ⁄2 21 ⁄4 2 ⁄8 1.385 ⁄32 16 2 ⁄32
459.00 458.60 456.46 456.06 453.42 452.22 450.85 71.44 12.7 46.0 63.50 539.8 60.3 35.18 15.1 406.4 75.41
1 13 1 13 1 1 3 19 31
480 N 096 P 96 5 18.858 18.842 18.758 18.742 18.638 18.591 18 ⁄2 2 ⁄16 ⁄2 1 ⁄16 2 ⁄2 22 ⁄16 2 ⁄8 1.510 ⁄32 16 2 ⁄32
478.99 478.59 476.45 476.05 473.41 472.21 469.9 71.44 12.7 46.0 63.50 560.4 60.3 38.35 15.1 406.4 75.41
1 1 1 13 13 13 11 19 9
500 N 500 P 500 5 19.646 19.630 19.546 19.530 19.426 19.379 19 ⁄4 3 ⁄8 ⁄2 1 ⁄16 2 ⁄16 22 ⁄16 2 ⁄16 1.510 ⁄32 16 3 ⁄32
499.01 498.60 496.47 496.06 493.42 492.23 489.0 79.4 12.7 46.0 71.4 579.4 68.3 38.35 15.1 406.4 83.3
3 1 1 13 13 13 11 13 3 9
530 N 530 P 530 4 20.827 20.807 20.702 20.682 20.557 20.494 20 ⁄8 3 ⁄8 ⁄2 1 ⁄16 2 ⁄16 24 ⁄16 2 ⁄16 1.635 ⁄16 16 ⁄4 3 ⁄32
529.01 528.50 525.83 525.32 522.15 520.55 517.5 79.4 12.7 46.0 71.4 630.2 68.3 41.53 20.6 425.5 83.3
5 3 1 13 1 9 15 13 3 17
560 N 560 P 560 4 22.008 21.988 21.883 21.863 21.738 21.675 21 ⁄8 3 ⁄8 ⁄2 1 ⁄16 3 ⁄16 25 ⁄16 2 ⁄16 1.635 ⁄16 18 ⁄4 3 ⁄32
559.00 558.50 555.83 555.32 552.15 550.55 549.3 85.7 12.7 46.0 77.8 649.3 71.4 41.53 20.6 476.3 89.7
1 3 1 13 1 9 15 13 17
600 N 600 P 600 4 23.583 23.563 23.458 23.438 23.313 23.250 23 ⁄8 3 ⁄8 ⁄2 1 ⁄16 3 ⁄16 27 ⁄16 2 ⁄16 1.635 ⁄16 20 3 ⁄32
599.01 598.50 595.83 595.33 592.15 590.55 587.4 85.7 12.7 46.0 77.8 700.1 74.6 41.53 20.6 508.0 89.7
3 3 1 1 3 15 13 1 5
630 N 630 P 630 4 24.764 24.744 24.639 24.619 24.494 24.431 24 ⁄8 3 ⁄8 ⁄2 2 3 ⁄16 28 ⁄4 2 ⁄16 1.885 ⁄16 20 ⁄2 3 ⁄8
629.01 628.50 625.83 625.32 622.15 520.55 619.1 85.7 12.7 50.8 77.8 730.3 74.6 47.88 20.6 520.7 92.1
7 9 1 1 11 1 13 1 13
670 N 670 P 670 4 26.339 26.319 26.214 26.194 26.069 26.006 25 ⁄8 3 ⁄16 ⁄2 2 3 ⁄4 30 ⁄16 3 ⁄8 1.885 ⁄16 21 ⁄2 3 ⁄16
669.01 668.50 665.84 665.33 662.15 660.55 657.2 90.5 12.7 50.8 82.6 779.5 79.4 47.88 20.6 546.1 96.8
3 5 11 11 9 1 1
710 N 710 P 710 3 27.914 27.887 27.747 27.720 27.56 27.497 27 ⁄8 4 ⁄8 2 3 ⁄16 32 ⁄16 3 ⁄16 2.020 1 22 ⁄2 4 ⁄4
709.02 708.33 704.77 704.09 700.02 698.42 695.3 101.6 15.9 50.8 93.7 830.3 90.5 51.30 25.4 571.5 108.0
5 11 1 9 1
750 N 750 P 750 3 29.489 29.462 29.322 29.295 29.135 29.072 29 4 ⁄8 2 3 ⁄16 34 ⁄4 3 ⁄16 2.270 1 23 4 ⁄4
749.02 748.34 744.78 744.09 740.03 738.43 736.6 101.6 15.9 50.8 93.7 870.0 90.5 57.66 25.4 584.2 108.0
5 11 1 9 1 1
800 N 800 P 800 3 31.457 31.430 31.290 31.263 31.103 31.040 31 4 ⁄8 2 3 ⁄16 36 ⁄4 3 ⁄16 2.270 1 24 ⁄4 4 ⁄4
799.01 798.32 794.77 794.08 790.02 788.42 787.4 101.6 15.9 50.8 93.7 920.8 90.5 57.66 25.4 616.0 108.0
7 5 11 9 9 1 1
850 N 850 P 850 3 33.426 33.399 33.259 33.232 33.072 33.009 32 ⁄8 4 ⁄8 2 3 ⁄16 38 ⁄16 3 ⁄16 2.520 1 25 ⁄2 4 ⁄4
849.02 848.34 844.78 844.09 840.03 838.43 835.0 101.6 15.9 50.8 93.7 979.5 90.5 64.01 25.4 647.7 108.0
7 3 5 1 9 15 1 5
900 N 900 P 900 3 35.394 35.367 35.227 35.200 35.040 34.977 34 ⁄8 4 ⁄8 ⁄8 2 4 ⁄16 40 ⁄16 3 ⁄16 2.520 1 26 ⁄4 4 ⁄8
899.01 898.32 894.77 894.08 890.02 888.42 885.8 111.1 15.9 50.8 103.2 1030.3 100.0 64.01 25.4 666.8 117.5
3 1 3 1 15 1 5
950 N 950 P 950 3 37.363 37.336 37.196 37.169 37.009 36.946 36 ⁄4 4 ⁄2 ⁄4 2 4 ⁄4 43 3 ⁄16 2.520 1 27 ⁄4 4 ⁄8
949.02 948.33 944.78 944.09 940.03 938.43 933.5 114.3 19.1 50.8 108 1092.2 100.0 64.01 25.4 692.2 117.5
(1) (2)
See page 305 for recommended S-3 shaft tolerances. C is outer ring width which may be obtained from bearing dimension tables.
291
Mounting Procedures
Depending on the size of the bearing and the application, there are several inches off the bottom of the tank. Small support blocks separate
different methods for mounting roller bearings. In all methods, however, the bearing from the screen. It is important to keep the bearing away
certain basic rules must be followed. from any localized high-heat source that may raise its temperature
Cleanliness excessively, resulting in race hardness reduction.
Choose a clean environment. Work in an atmosphere free from dust or
moisture. If this is not obtainable, and sometimes in the field it isn’t, the
installer should make every effort to insure cleanliness by use of protec-
tive screens, clean cloths, etc.
Figure 1:
Plan the work Heat Expansion Method
Know in advance what you are going to do and have all the necessary
tools at hand. This reduces the amount of time for the job and lessens the OIL
chance for dirt to get into the bearing. BEARING
Inspection and preparation BEARING SUPPORT
BLOCK
All component parts of the machine should be on hand and thoroughly BEARING HELD
cleaned before proceeding. Housings should be cleaned, including FROM BOTTOM
blowing out the oil holes. Do not use air hose on bearings. If blind holes BY SCREEN FLAME BURNER
are used, insert magnetic rod to remove metal chips that might have been
lodged there during fabrication.
Shaft shoulders and spacer rings contacting the bearing should be Flame type burners are commonly used. An automatic device for
square with the shaft axis. The shaft fillet must be small enough to clear temperature control is desirable. If safety regulations prevent the use of
the radius of the bearing. an open heated oil bath, a mixture of 15% soluble-oil in water may be
On original installations, all component parts should be checked used. This mixture may be heated to a maximum of 200°F, without being
against the detail specification prints for dimensional accuracy. Shaft and flammable. The bath should be checked from to time to insure its proper
housing should be carefully checked for size and roundness. combination as the water evaporates. The bath leaves a thin film of oil
Shaft and housing finish on the bearing sufficient for temporary rust prevention, but normal
Shaft surfaces on which the bearing will be mounted must be clean and lubrication should be applied to the bearing as soon as possible after
free from nicks and burrs. For an application with stationary housing and installation. Be sure all of the soluble-oil in water solution has been
rotating shaft, it is suggested the bearing seat on the shaft be ground to drained away from the bearing.
63 RMS maximum. If it is impractical to use a ground finish, a machined Arbor press method
finish of 125 RMS is acceptable in many cases, but the amount of The alternate method of mounting, generally used only on smaller sizes,
interference fit should be slightly increased. Consult our engineering is to press the bearing onto the shaft or into the housing. This can be
department for recommendations. done by using an arbor press and a mounting tube as shown in Figure 2.
For a stationary outer ring which is required to float (i.e., slide The tube can be of soft steel with inside diameter slightly larger than the
axially in the housing), a housing finish of 63 RMS maximum is sug- shaft. The O.D. of the tube should not exceed the maximum shoulder
gested. Where the outer ring is not required to float, a surface finish of height given in the tables of dimensions. The tube should be faced
125RMS maximum is generally satisfactory. square at both ends, thoroughly clean inside and out, and long enough
to clear the end of the shaft after the bearing is mounted.
DON’T REMOVE THE BEARING FROM ITS WRAPPING UNTIL
ACTUALLY READY TO MOUNT IT.
Figure 2:
MOUNTING STRAIGHT BORE BEARINGS Arbor Press Method
Heat expansion method
Most applications require a tight interference fit on the shaft. Mounting is
simplified by heating the bearing to expand it sufficiently to slide easily
onto the shaft. Two methods of heating are in common use:
1. Tank of heated oil.
2. Induction heating.
The first is accomplished by heating the bearing in a tank of oil having
a high flash point. The oil temperature should not be allowed to exceed
250°F. A temperature of 200°F is sufficient for most applications. the
bearing should be heated at this temperature, generally for 20 or 30
minutes, until it is expanded sufficiently to slide onto the shaft very easily.
The induction heating method is particularly suited for mounting small
bearings in production line assembly. Induction heating is rapid and care
must be taken to prevent bearing temperature from exceeding 200°F.
Trial runs with the unit and bearing are usually necessary to obtain proper If the outer ring is being pressed into the housing, the O.D. of the
timing. Thermal crayons (such as Tempilstiks*) which melt at predeter- mounting tube should be slightly smaller than the housing bore, and the
mined temperatures can be used to check the bearing temperature. I.D. should not be less than the recommended housing shoulder diameter
While the bearing is still hot, it should be positioned squarely against in the tables of dimensions.
the shoulder. Lockwashers and locknuts, or clamping plates, are then Coat the shaft with a light machine oil to reduce the force needed for
installed to hold the bearing against the shoulder of the shaft. As the a press fit. Carefully place the bearing on the shaft making sure it is
bearing cools, the locknut or clamping plate should be tightened. square with the shaft axis. Apply steady pressure from the arbor ram to
In cases of outer ring rotation, where the outer ring is a tight fit in the drive the bearing firmly against the shoulder.
housing, the housing member can be expanded by heating. Never attempt a press fit on a shaft by applying pressure to the outer
The oil bath is shown in Figure 1. The bearing should not be in direct ring, or a press fit in a housing by applying pressure to the inner ring.
contact with the heat source. The usual arrangement is to have a screen
*Registered trademark Tempil Corp.
292
SHAFT MOUNTING TAPERED BORE inner ring. Periodically measure the RIC to keep track of the reduction
SPHERICAL ROLLER BEARINGS in RIC. Continue the procedure until the proper amount of reduction is
Although the fit of a tapered bore spherical roller bearing can be obtained – do not exceed recommended amount of reduction. As a final
determined by measuring the distance the bearing is forced onto the check, make sure that the remaining RIC equals or exceeds the
tapered seat, it is more practical to measure the reduction of radial minimum mounted clearance shown in the table below.
internal clearance caused by the expansion of the inner ring. This During mounting, the RIC should be checked at the unloaded roller.
procedure requires determining the initial RIC before mounting, and If this happens to be at the bottom, make sure that the roller is raised to
checking the RIC during mounting until the proper reduction of RIC seat firmly at the inboard position of the inner race.
has been accomplished. When the recommended amount of reduction of RIC has been
To determine initial RIC, the following procedure should be observed. accomplished, the bearing is properly fitted. Complete the procedure by
A feeler gauge with the thinnest blade of .0015" is used. Place the peening the lockwasher tang into the locknut slot, or securing the
bearing in an upright position with the inner and outer ring faces parallel. lockplate.
Place the thumbs on inner ring bore and ocillate inner ring two or three The following chart indicates the recommended reduction of RIC to
times, pressing down firmly. This “seats” the inner ring and rolling be used in mounting tapered bore spherical roller bearings on shafts or
elements. Position the individual roller assemblies so that a roller is at adapter sleeves:
the top of the inner ring –on both sides of the bearing. Press the top two
rollers inward to assure proper contact with the inner ring raceways. With
the rollers in correct position, insert a thin blade of the feeler gage
Recommended Reduction of RIC
between the rollers. Move it carefully along the top roller, between the
Bearing Recommended Minimum RIC after mounting
Bore Reduction of Bearings with Initial Clearances:
RIC inches
mm inches Normal
Over Incl. min. max (standard) C3 C4
293
294
Spherical
Roller Bearing
Pillow Blocks
Page Page
SPHERICAL ROLLER BEARING PILLOW BLOCKS DIMENSIONS – PILLOW BLOCK UNITS
AND TAKE-UP UNITS SAF225, SAF226 Series Adapter Mounting . . . . . . . . . . . 298
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 296 SDAF225, SDAF226 Series Adapter Mounting . . . . . . . . 299
Design and Construction . . . . . . . . . . . . . . . . . . . . . . . . . 296 SAF230, SDAF230 Series Adapter Mounting . . . . . . . . . 300
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297 SDAF231K, SDAF232K Series Adapter Mounting . . . . . 301
Adapter vs. Straight Bore SAF222, SAF223 Series, Straight Bore Mounting . . . . . . 302 2
Fixed and Float Pillow Blocks SDAF222, SDAF223 Series, Straight Bore Mounting . . . 303
Closed End Installations SDAF231, SDAF232 Series, Straight Bore Mounting . . . 304
Shaft Diameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297
Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297 Take-Up Units
295
INTRODUCTION
Torrington capabilities in the engineering and manufacture of
heavy-duty pillow blocks provide important benefits to users.
Another very important benefit is Timken’s worldwide sales
organization, staffed with experienced bearing engineers who are
available for consultation on any pillow block or bearing application.
Expert engineering assistance is available for applications involving
shaft sizes up to 40 inches and larger such as - BOF trunnions,
bridge blocks and ball mills. If your design calls for shaft sizes or
loads not listed in this catalog, contact the Timken sales office
nearest you for information about availability of special units.
Spherical Roller
Bearing
Tapered ring
Steel Stabilizing
Ring
Locknut
Lockwasher
296
MOUNTING
Adapter vs. Straight Bore Fixed and Float Pillow Blocks
Usually a spherical roller bearing pillow block assembly is mounted Any style of Torrington pillow blocks can be easily installed either at
on a straight shaft using a tapered bore bearing and adapter the float or fixed position on the shaft. For the fixed position, a
assembly. Standard commercial shafting can be used without stabilizing ring is added between the bearing outer face ring and the
additional machining. (Recommended shaft diameters are shown on housing shoulder to positively locate the shaft and prevent axial
page 281). Adapter mount also permits maximum flexibility in the movement.
axial positioning of the bearing on the shaft and will accommodate Some applications require centering of the bearing in its housing.
light locational thrust loads. Torrington pillow blocks for tapered bore To accomplish this, two special width stabilizing rings can be
and adapter-mounted bearings are available in Series 225, 226, ordered.
230, 231K and 232K. In the float position, the ring is not used allowing the bearing to
Adapter mounted spherical roller bearings require the correct move axially (a maximum of 3⁄8") to compensate for thermal
removal of diametrical clearance from the bearing to prevent relative expansion or contraction of the shaft.
rotation between inner race and sleeve or shaft. Failure to employ Pillow blocks ordered by the numbers in the dimension tables are
proper mounting procedures can cause heating and reduced fixed units. To order float units specify by adding suffix “Float” or
bearing performance. For proper shaft mounting of adapter type “FL” to the pillow block number.
spherical roller bearings, see page 292 of the spherical roller
bearing section. Closed End Installations
When application conditions produce heavy thrust loads or a In some applications, the shaft end is designed to terminate inside
need exists for exact axial location or a positive shaft interference the pillow block. For such a design, positive fitting end-closure
fit, a direct straight bore mounting may be the best option. This inserts are available to seal out contaminants and retain lubricant.
requires a shouldered shaft, machined for proper fit, and a straight Torrington heavy-duty end plugs include O-rings for positive sealing.
bore bearing. Torrington pillow block assemblies for straight bore Designers and installers need to make sure the shaft end does
applications are available in Series 222, 223, 231 and 232. not contact the closure. A minimum of 1⁄8" clearance at maximum
Recommended fits for shafts in cylindrical bore spherical roller thermal expansion is recommended between the end of the shaft
bearings are shown on pages E32 through E35 in the engineering and the closure. Dimension “Y” in the tables defines the maximum
section. For applications involving heavy shock, vibration, unbal-
anced rotating loads or other abnormal conditions, consult with
permissible length of shaft from centerline of the pillow block
housing. If end closure is desired, specify by adding “CL” (one end 2
Timken Engineering. closed) to the pillow block assembly number.
LUBRICATION
Torrington pillow block housings have been designed for grease and A lubrication groove and oil holes are provided in the bearing
oil bath lubrication. They can also be modified easily to accommodate outer ring. This feature, designated by adding suffix “W33” to the
circulating oil or oil/air mist systems. Grease fittings or sight gauges bearing number, should be specified whenever reordering bearings
are available upon request. for pillow blocks. In most cases, the fresh lubricant is fed directly to
the center of the bearing between the rows of rollers and distributed
to the rest of the bearing. This assures purging of the used lubricant
from the bearing.
LOAD RATINGS AND LIFE It should be noted that the load rating figures supplied in this
Load ratings for the spherical roller bearings which are used in catalog are applicable only when the load direction is generally
pillow blocks are found in the dimension tables for those bearings toward the base of the pillow block. If the pillow block must be
on pages 268 through 285. mounted so that the load could be applied in any other direction,
Life calculation formulas are found on page E54 of the Engineer- consult a Timken sales engineer.
ing section.
Besides individual bearing selection, the ability of the pillow
block to carry the operating load should be considered.
297
The basic number for ordering complete Torrington pillow block assemblies is
listed in the table below.
H L
Each assembly includes the housing cap and base, cap bolts,bearing, S-1
bearing adapter, locknut and washer, stabilizing ring, and triple ring seals. Y
If the pillow block housing only is desired use the numbers listed in column
A
headed “Housing Only”. These units include: cap, base, cap bolts, triple ring
seals, and stabilizing ring. D K FLOAT
END
Assembly and pillow blocks as described above, constitute fixed units. To
order float units, specify part number plus suffix “Float” or “FL”.
All assemblies shown are furnished in cast iron. If cast steel is desired, E F
add the letter “S” to the alpha prefix (i.e.SAFS 22515). B C
Four- bolt bases are standard on all assemblies except as noted.
inch inch inch inch inch inch inch inch inch inch inch inch inch lbs.
15 3 5 3 15 7 3 3 11 3 3 3 1
SAF22511 1 ⁄16 2 ⁄4 9 ⁄8 2 ⁄4 ⁄16 7 ⁄8 7 ⁄8 ⁄4 5 ⁄32 1 ⁄16 3 ⁄4 1 ⁄16 2 ⁄2 22211K SNW-11 SAF 511 SR-11-0 LER-24 16
3 1 1 1 3 25 1 5 7 1
SAF22513 2 ⁄16 3 11 3 ⁄8 1 9 ⁄2 8 ⁄8 ⁄4 5 ⁄32 1 ⁄8 4 ⁄16 1 ⁄32 2 ⁄2 22213K SNW-13 SAF 513 SR-13-0 LER-29 19.5
7 1 1 1 1 5 5 3 1 3 9 5
SAF22515 2 ⁄16 3 ⁄4 11 ⁄4 3 ⁄8 1 ⁄8 9 ⁄8 8 ⁄8 — 6 ⁄8 1 ⁄4 4 ⁄4 1 ⁄32 2 ⁄8 22215K SNW-15 SAF515 SR-15-0 LER37 30
7 1 1 1 1 5 5 7 3 1 3 9 1
FSAF22515 2 ⁄16 3 ⁄4 11 ⁄4 3 ⁄8 1 ⁄8 9 ⁄8 8 ⁄8 1 ⁄8 6 ⁄8 1 ⁄4 4 ⁄4 1 ⁄32 4 ⁄2 22215K SNW-15 FSAF515 SR-15-0 LER37 30
11 1 1 3 5 7 11 7 21 3
SAF22516 2 ⁄16 3 ⁄2 13 3 ⁄2 1 ⁄16 11 9 ⁄8 — 6 ⁄8 1 ⁄32 4 ⁄8 1 ⁄64 2 ⁄4 22216K SNW-16 SAF516 SR-16-13 LER44 37
11 1 1 3 5 1 7 11 7 21 5
FSAF22516 2 ⁄16 3 ⁄2 13 3 ⁄2 1 ⁄16 11 9 ⁄8 2 ⁄8 6 ⁄8 1 ⁄32 4 ⁄8 1 ⁄64 4 ⁄8 22216K SNW-16 FSAF516 SR-16-13 LER44 37
15 3 1 1 7 1 7 15 27 3
SAF22517 2 ⁄16 3 ⁄4 13 3 ⁄2 1 ⁄4 11 9 ⁄8 — 7 ⁄4 1 ⁄16 4 ⁄16 1 ⁄64 2 ⁄4 22217K SNW-17 SAF517 SR-17-14 LER53 40
15 3 1 1 7 1 1 7 15 27 5
FSAF22517 2 ⁄16 3 ⁄4 13 3 ⁄2 1 ⁄4 11 9 ⁄8 2 ⁄8 7 ⁄4 1 ⁄16 4 ⁄16 1 ⁄64 4 ⁄8 22217K SNW-17 FSAF517 SR-17-14 LER53 40
3 3 7 1 5 3 3 17 1 37 3
SAF22518 3 ⁄16 4 13 ⁄4 3 ⁄8 1 ⁄2 11 ⁄8 10 ⁄8 — 7 ⁄4 1 ⁄32 6 ⁄4 1 ⁄64 2 ⁄4 22218K SNW-18 SAF518 SR-18-15 LER69 49
3 3 7 1 5 3 1 3 17 1 37 5
FSAF22518 3 ⁄16 4 13 ⁄4 3 ⁄8 1 ⁄2 11 ⁄8 10 ⁄8 2 ⁄8 7 ⁄4 1 ⁄32 6 ⁄4 1 ⁄64 4 ⁄8 22218K SNW-18 FSAF518 SR-18-15 LER69 49
7 1 1 3 3 1 5 11 3 49 7
SAF22520 3 ⁄16 4 ⁄2 15 ⁄4 4 ⁄8 1 ⁄4 13 ⁄8 11 ⁄8 — 8 ⁄16 1 ⁄4 6 1 ⁄64 2 ⁄8 22220K SNW-20 SAF520 SR-20-17 LER102 65
7 1 1 3 3 1 5 3 11 3 49 3
FSAF22520 3 ⁄16 4 ⁄2 15 ⁄4 4 ⁄8 1 ⁄4 13 ⁄8 11 ⁄8 2 ⁄8 8 ⁄16 1 ⁄4 6 1 ⁄64 4 ⁄4 22220K SNW-20 FSAF520 SR-20-17 LER102 65
15 15 1 3 1 5 3 9 7 3 61 3
SAF22522 3 ⁄16 4 ⁄16 16 ⁄2 4 ⁄4 2 14 ⁄2 12 ⁄8 2 ⁄4 9 ⁄16 1 ⁄8 6 ⁄8 1 ⁄64 4 ⁄4 22222K SNW-22 SAF522 SR-22-19 LER109 81
3 1 1 3 1 1 1 3 1 15 3 3 3
SAF22524 4 ⁄16 5 ⁄4 16 ⁄2 4 ⁄4 2 ⁄8 14 ⁄2 13 ⁄4 2 ⁄4 10 ⁄4 1 ⁄16 7 ⁄8 2 ⁄32 4 ⁄4 22224K SNW-24 SAF524 SR-24-20 LER113 94
7 3 1 3 5 1 9 7 17 7
SAF22526 4 ⁄16 6 18 ⁄8 5 ⁄8 2 ⁄8 16 14 ⁄8 3 ⁄4 11 ⁄16 2 ⁄16 8 2 ⁄64 4 ⁄8 22226K SNW-26 SAF526 SR-26-0 LER117 137
15 1 7 3 1 3 3 1 3 13
SAF22528 4 ⁄16 6 20 ⁄8 5 ⁄8 2 ⁄8 17 ⁄8 16 3 ⁄8 11 ⁄4 2 ⁄8 7 ⁄4 2 ⁄32 4 1 22228K SNW-28 SAF528 SR-28-0 LER122 159
3 5 1 1 1 1 3 1 3 3 37
SAF22530 5 ⁄16 6 ⁄16 21 ⁄4 6 ⁄4 2 ⁄2 18 ⁄4 17 3 ⁄4 12 ⁄2 2 ⁄16 8 ⁄8 2 ⁄64 4 1 22230K SNW-30 SAF530 SR-30-0 LER125 189
7 11 1 5 1 3 3 5 3 3 49
SAF22532 5 ⁄16 6 ⁄16 22 6 ⁄4 2 ⁄8 19 ⁄4 17 ⁄8 3 ⁄4 13 ⁄16 2 ⁄16 8 ⁄4 2 ⁄64 4 1 22232K SNW-32 SAF532 SR-32-0 LER130 225
15 1 3 3 3 5 3 1 9 5 3 59
SAF22534 5 ⁄16 7 ⁄16 24 ⁄4 6 ⁄4 2 ⁄4 21 ⁄8 19 ⁄8 4 ⁄4 14 ⁄16 2 ⁄16 9 ⁄8 2 ⁄64 4 1 22234K SNW-34 SAF534 SR-34-0 LER140 300
7 1 3 1 5 7 5 1 9 11 61
SAF22536 6 ⁄16 7 ⁄2 26 ⁄4 7 ⁄8 3 23 ⁄8 20 ⁄8 4 ⁄8 15 ⁄2 2 ⁄16 9 ⁄16 2 ⁄64 4 1 22236K SNW-36 SAF536 SR-36-30 LER148 330
15 7 1 1 3 5 1 11 5 3 7 1
SAF22538 6 ⁄16 7 ⁄8 28 7 ⁄2 3 ⁄8 24 ⁄8 21 ⁄8 4 ⁄2 15 ⁄16 2 ⁄8 10 ⁄4 3 ⁄64 4 1 ⁄4 22238K SNW-38 SAF538 SR-38-32 LER155 375
3 1 1 3 1 3 11 13 9 1
SAF22540 7 ⁄16 8 ⁄4 29 ⁄2 8 3 ⁄8 25 22 ⁄2 5 17 ⁄16 2 ⁄16 10 ⁄16 3 ⁄32 4 1 ⁄4 22240K SNW-40 SAF540 SR-40-34 LER159 445
15 1 3 3 3 7 3 1 5 3 1 17 1
SAF22544 7 ⁄16 9 ⁄2 32 ⁄4 8 ⁄4 3 ⁄4 27 ⁄8 24 ⁄4 5 ⁄4 19 ⁄8 3 ⁄8 11 ⁄2 3 ⁄32 4 1 ⁄2 22244K SNW-44 SAF544 SR-44-38 LER167 615
(1) (3)
See page 305 for recommended shaft diameter S-1 tolerances. Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting.
(2) (4)
“Housing Only” includes: cap, base, cap bolts, triple ring seals and stabilizing rings Includes sleeve, locknut and lockwasher. Add shaft size to order.
as required. Note: Limiting speeds are found in dimension tables in the spherical roller bearing section.
inch inch inch inch inch inch inch inch inch inch inch inch inch lbs.
15 1 1 3 3 1 5 11 13 5 57 7
SAF22617 2 ⁄16 4 ⁄2 15 ⁄4 4 ⁄8 1 ⁄4 13 ⁄8 11 ⁄8 — 8 ⁄16 1 ⁄16 6 ⁄8 1 ⁄64 2 ⁄8 22317K SNW-117 SAF617 SR-20-17 LER184 81
15 1 1 3 3 1 5 3 11 13 5 57 3
FSAF22617 2 ⁄16 4 ⁄2 15 ⁄4 4 ⁄8 1 ⁄4 13 ⁄8 11 ⁄8 2 ⁄8 8 ⁄16 1 ⁄16 6 ⁄8 1 ⁄64 4 ⁄4 22317K SNW-117 FSAF617 SR-20-17 LER184 81
3 3 1 3 1 1 3 3 3
SAF22618 3 ⁄16 4 ⁄4 15 ⁄2 4 ⁄8 2 13 ⁄2 12 2 ⁄4 9 ⁄16 2 7 2 ⁄64 4 ⁄4 22318K SNW-118 SAF618 SR-21-18 LER188 90
7 1 1 3 1 1 1 3 1 1 3 19 3
SAF22620 3 ⁄16 5 ⁄4 16 ⁄2 4 ⁄4 2 ⁄8 14 ⁄2 13 ⁄4 2 ⁄4 10 ⁄4 2 ⁄8 7 ⁄8 2 ⁄64 4 ⁄4 22320K SNW-120 SAF620 SR-24-20 LER102 113
15 3 1 3 5 1 9 1 31 7
SAF22622 3 ⁄16 6 18 ⁄8 5 ⁄8 2 ⁄8 16 14 ⁄8 3 ⁄4 11 ⁄16 2 ⁄2 8 2 ⁄64 4 ⁄8 22322K SNW-122 SAF622 SR-0-22 LER109 151
3 5 1 1 1 1 3 1 9 3 41
SAF22624 4 ⁄16 6 ⁄16 21 ⁄4 6 ⁄4 2 ⁄2 18 ⁄4 17 3 ⁄4 12 ⁄2 2 ⁄16 8 ⁄8 2 ⁄64 4 1 22324K SNW-124 SAF624 SR-0-24 LER113 201
7 11 1 5 1 3 3 5 5 3 27
SAF22626 4 ⁄16 6 ⁄16 22 6 ⁄4 2 ⁄8 19 ⁄4 17 ⁄8 3 ⁄4 13 ⁄16 2 ⁄8 8 ⁄4 2 ⁄32 4 1 22326K SNW-126 SAF626 SR-0-26 LER117 245
15 1 3 3 3 5 3 1 9 11 3 5
SAF22628 4 ⁄16 7 ⁄16 24 ⁄4 6 ⁄4 2 ⁄4 21 ⁄8 19 ⁄8 4 ⁄4 14 ⁄16 2 ⁄16 9 ⁄8 3 ⁄64 4 1 22328K SNW-128 SAF628 SR-0-28 LER122 310
3 1 3 1 5 7 5 1 7 11 17
SAF22630 5 ⁄16 7 ⁄2 26 ⁄4 7 ⁄8 3 23 ⁄8 20 ⁄8 4 ⁄8 15 ⁄2 2 ⁄8 9 ⁄16 3 ⁄64 4 1 22330K SNW-130 SAF630 SR-36-30 LER125 350
7 7 1 1 3 5 1 11 15 3 7 1
SAF22632 5 ⁄16 7 ⁄8 28 7 ⁄2 3 ⁄8 24 ⁄8 21 ⁄8 4 ⁄2 15 ⁄16 2 ⁄16 10 ⁄4 3 ⁄16 4 1 ⁄4 22332K SNW-132 SAF632 SR-38-32 LER130 420
15 1 1 3 1 3 1 13 19 1
SAF22634 5 ⁄16 8 ⁄4 29 ⁄2 8 3 ⁄8 25 22 ⁄2 5 17 ⁄16 3 ⁄16 10 ⁄16 3 ⁄32 4 1 ⁄4 22334K SNW-134 SAF634 SR-40-34 LER140 485
7 7 1 1 1 5 1 1 3 1 47 1
SAF22636 6 ⁄16 8 ⁄8 31 ⁄4 8 ⁄4 3 ⁄2 26 ⁄8 24 5 ⁄4 18 ⁄2 3 ⁄8 11 ⁄4 3 ⁄64 4 1 ⁄4 22336K SNW-136 SAF636 SR-0-36 LER148 545
15 1 3 3 3 7 3 1 5 11 1 57 1
SAF22638 6 ⁄16 9 ⁄2 32 ⁄4 8 ⁄4 3 ⁄4 27 ⁄8 24 ⁄4 5 ⁄4 19 ⁄8 3 ⁄16 11 ⁄2 3 ⁄64 4 1 ⁄2 22338K SNW-138 SAF638 SR-44-38 LER155 655
3 7 1 1 1 1 3 3 1 5 1
SAF22640 7 ⁄16 9 ⁄8 34 ⁄4 9 4 29 ⁄2 26 ⁄4 5 ⁄2 20 ⁄16 3 ⁄4 12 ⁄4 4 ⁄64 4 1 ⁄2 22340K SNW-140 SAF640 SR-0-40 LER159 725
(1) (3)
See page 305 for recommended shaft diameter S-1 tolerances. Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting.
(2) (4)
“Housing Only” includes: cap, base, cap bolts, triple ring seals and stabilizing rings Includes sleeve, locknut and lockwasher. Add shaft size to order.
as required. Note: Limiting speeds are found in dimension tables in the spherical roller bearing section.
298
inch inch inch inch inch inch inch inch inch inch inch inch inch lbs.
7 1 1 7 1 5 3 15 3 3 49 3
SDAF22520 3 ⁄16 4 ⁄2 15 ⁄4 6 1 ⁄8 13 ⁄8 11 ⁄8 3 ⁄8 8 ⁄16 1 ⁄4 6 ⁄4 1 ⁄64 4 ⁄4 22220K SNW-20 SDAF520 SR-20-17 LER75 81
SDAF22522
SDAF22524
15
3 ⁄16
3
4 ⁄16
15
4 ⁄16
1
5 ⁄4
1
16 ⁄2
1
16 ⁄2
3
6 ⁄4
7
6 ⁄8
1
2 ⁄8
1
2 ⁄4
1
14 ⁄2
1
14 ⁄2
5
12 ⁄8
1
13 ⁄4
4
1
4 ⁄8
7
9 ⁄8
1
10 ⁄2
7
1 ⁄8
15
1 ⁄16
1
7 ⁄4
3
7 ⁄8
61
1 ⁄64
3
2 ⁄32
4
4
7
7
⁄8
⁄8
22222K
22224K
SNW-22
SNW-24
SDAF522
SDAF524
SR-22-19
SR-24-20
LER93
LER113
94
137
2
7 3 1 3 5 1 7 7 17
SDAF22526 4 ⁄16 6 18 ⁄8 7 ⁄2 2 ⁄8 16 14 ⁄8 4 ⁄2 11 ⁄8 2 ⁄16 8 2 ⁄64 4 1 22226K SNW-26 SDAF526 SR-26-0 LER117 159
15 1 1 3 1 1 1 1 13 13 1
SDAF22528 4 ⁄16 6 20 ⁄8 7 ⁄2 2 ⁄8 17 ⁄8 16 4 ⁄2 12 ⁄16 2 ⁄8 7 ⁄16 2 ⁄32 4 1 ⁄8 22228K SNW-28 SDAF528 SR-28-0 LER122 189
3 5 1 7 1 1 3 13 3 3 37 1
SDAF22530 5 ⁄16 6 ⁄16 21 ⁄4 7 ⁄8 2 ⁄2 18 ⁄4 17 4 ⁄4 12 ⁄16 2 ⁄16 8 ⁄8 2 ⁄64 4 1 ⁄8 22230K SNW-30 SDAF530 SR-30-0 LER125 225
7 11 1 1 1 3 11 3 3 49 1
SDAF22532 5 ⁄16 6 ⁄16 22 8 ⁄4 2 ⁄2 19 ⁄4 17 ⁄8 5 13 ⁄16 2 ⁄16 8 ⁄4 2 ⁄64 4 1 ⁄8 22232K SNW-32 SDAF532 SR-32-0 LER130 300
15 1 3 1 5 3 1 1 5 5 59 1
SDAF22534 5 ⁄16 7 ⁄16 24 ⁄4 9 2 ⁄2 21 ⁄8 19 ⁄8 5 ⁄2 14 ⁄4 2 ⁄16 9 ⁄8 2 ⁄64 4 1 ⁄4 22234K SNW-34 SDAF534 SR-34-0 LER140 310
7 1 3 3 3 5 7 7 3 9 61 1
SDAF22536 6 ⁄16 7 ⁄2 26 ⁄4 9 ⁄8 2 ⁄4 23 ⁄8 20 ⁄8 5 ⁄8 15 ⁄16 2 ⁄16 10 2 ⁄64 4 1 ⁄4 22236K SNW-36 SDAF536 SR-36-30 LER148 350
15 7 5 1 1 1 1 5 5 7 3
SDAF22538 6 ⁄16 7 ⁄8 27 ⁄8 10 3 23 ⁄2 21 ⁄2 6 ⁄4 16 ⁄4 2 ⁄8 10 ⁄8 3 ⁄64 4 1 ⁄8 22238K SNW-38 SDAF538 SR-38-32 LER224 420
3 1 3 1 1 3 1 11 1 9 3
SDAF22540 7 ⁄16 8 ⁄4 28 ⁄4 10 ⁄2 3 ⁄4 25 23 6 ⁄4 17 ⁄8 2 ⁄16 11 ⁄8 3 ⁄32 4 1 ⁄8 22240K SNW-40 SDAF540 SR-40-34 LER228 545
15 1 1 1 7 5 1 1 3 7 17 1
SDAF22544 7 ⁄16 9 ⁄2 32 11 ⁄4 3 ⁄2 27 ⁄8 25 ⁄8 7 ⁄4 19 ⁄4 3 ⁄8 11 ⁄8 3 ⁄32 4 1 ⁄2 22244K SNW-44 SDAF544 SR-44-36 LER236 665
(1) (3)
See page 305 for recommended shaft diameter S-1 tolerances. Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting.
(2) (4)
“Housing Only” includes: cap, base, cap bolts, triple ring seals and stabilizing rings Includes sleeve, locknut and lockwasher. Add shaft size to order.
as required. Note: Limiting speeds are found in dimension tables in the spherical roller bearing section.
inch inch inch inch inch inch inch inch inch inch inch inch inch lbs.
15 1 1 7 1 5 3 15 13 3 57 3
SDAF22617 2 ⁄16 4 ⁄2 15 ⁄4 6 1 ⁄8 13 ⁄8 11 ⁄8 3 ⁄8 8 ⁄16 1 ⁄16 6 ⁄4 1 ⁄64 4 ⁄4 22317K SNW-117 SDAF617 SR-20-17 LER59 94
3 3 1 1 1 5 7 7 3 3
SDAF22618 3 ⁄16 4 ⁄4 15 ⁄2 6 ⁄8 2 13 ⁄2 12 3 ⁄8 9 ⁄16 2 6 ⁄8 2 ⁄64 4 ⁄4 22318K SNW-118 SDAF618 SR-21-18 LER69 137
7 1 1 7 1 1 1 1 1 1 3 19 7
SDAF22620 3 ⁄16 5 ⁄4 16 ⁄2 6 ⁄8 2 ⁄4 14 ⁄2 13 ⁄4 4 ⁄8 10 ⁄2 2 ⁄8 7 ⁄8 2 ⁄64 4 ⁄8 22320K SNW-120 SDAF620 SR-24-20 LER75 159
15 3 1 3 5 1 7 1 31
SDAF22622 3 ⁄16 6 18 ⁄8 7 ⁄2 2 ⁄8 16 14 ⁄8 4 ⁄2 11 ⁄8 2 ⁄2 8 2 ⁄64 4 1 22322K SNW-122 SDAF622 SR-0-22 LER93 189
3 5 1 7 1 1 3 13 9 3 41 1
SDAF22624 4 ⁄16 6 ⁄16 21 ⁄4 7 ⁄8 2 ⁄2 18 ⁄4 17 4 ⁄4 12 ⁄16 2 ⁄16 8 ⁄8 2 ⁄64 4 1 ⁄8 22324K SNW-124 SDAF624 SR-0-24 LER113 225
7 11 1 1 1 3 11 5 3 27 1
SDAF22626 4 ⁄16 6 ⁄16 22 8 ⁄4 2 ⁄2 19 ⁄4 17 ⁄8 5 13 ⁄16 2 ⁄8 8 ⁄4 2 ⁄64 4 1 ⁄8 22326K SNW-126 SDAF626 SR-0-26 LER117 300
15 1 3 1 5 3 1 1 11 5 5 1
SDAF22628 4 ⁄16 7 ⁄16 24 ⁄4 9 2 ⁄2 21 ⁄8 19 ⁄8 5 ⁄2 14 ⁄4 2 ⁄16 9 ⁄8 3 ⁄64 4 1 ⁄8 22328K SNW-128 SDAF628 SR-0-28 LER122 310
3 1 3 3 3 5 7 7 3 7 3 17 1
SDAF22630 5 ⁄16 7 ⁄2 26 ⁄4 9 ⁄8 2 ⁄4 23 ⁄8 20 ⁄8 5 ⁄8 15 ⁄16 2 ⁄8 9 ⁄4 3 ⁄64 4 1 ⁄4 22330K SNW-130 SDAF630 SR-36-30 LER125 395
7 7 5 1 1 1 1 15 5 7 3
SDAF22632 5 ⁄16 7 ⁄8 27 ⁄8 10 3 23 ⁄2 21 ⁄2 6 ⁄4 16 ⁄4 2 ⁄16 10 ⁄8 3 ⁄16 4 1 ⁄8 22332K SNW-132 SDAF632 SR-38-32 LER211 420
15 1 3 1 1 3 1 1 1 19 3
SDAF22634 5 ⁄16 8 ⁄4 28 ⁄4 10 ⁄2 3 ⁄4 25 23 6 ⁄4 17 ⁄8 3 ⁄16 11 ⁄8 3 ⁄32 4 1 ⁄8 22334K SNW-134 SDAF634 SR-40-34 LER215 525
7 7 1 3 1 3 1 7 15 7 3 47 1
SDAF22636 6 ⁄16 8 ⁄8 30 ⁄2 10 ⁄4 3 ⁄4 26 ⁄8 24 ⁄8 6 ⁄8 17 ⁄16 3 ⁄8 11 ⁄8 3 ⁄64 4 1 ⁄2 22336K SNW-136 SDAF636 SR-0-36 LER220 645
15 1 1 1 7 5 1 1 11 13 57 1
SDAF22638 6 ⁄16 9 ⁄2 32 11 ⁄4 3 ⁄2 27 ⁄8 25 ⁄8 7 ⁄4 19 ⁄4 3 ⁄16 11 ⁄16 4 ⁄64 4 1 ⁄2 22338K SNW-138 SDAF638 SR-44-38 LER224 705
3 7 1 3 1 1 5 5 15 3 1 5 5
SDAF22640 7 ⁄16 9 ⁄8 33 ⁄2 11 ⁄4 3 ⁄2 29 ⁄4 26 ⁄8 7 ⁄8 19 ⁄16 3 ⁄4 12 ⁄4 4 ⁄64 4 1 ⁄8 22340K SNW-140 SDAF640 SR-0-40 LER228 825
(1) (3)
See page 305 for recommended shaft diameter S-1 tolerances. Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting.
(2) (4)
“Housing Only” includes: cap, base, cap bolts, triple ring seals and stabilizing rings Includes sleeve, locknut and lockwasher. Add shaft size to order.
as required. Note: Limiting speeds are found in dimension tables in the spherical roller bearing
299
inch inch inch inch inch inch inch inch inch inch inch inch inch lbs.
3 1 1 3 3 1 5 3 11 9 55 3
SAF23024K 4 ⁄16 4 ⁄2 15 ⁄4 4 ⁄8 1 ⁄4 13 ⁄8 11 ⁄8 2 ⁄8 8 ⁄16 1 ⁄16 6 1 ⁄64 ⁄4 23024K SNW-3024 SAF024K SR-20-17 LER113 60
7 15 1 3 1 5 3 9 11 3 1 3
SAF23026K 4 ⁄16 4 ⁄16 16 ⁄2 4 ⁄4 2 14 ⁄2 12 ⁄8 2 ⁄4 9 ⁄16 1 ⁄16 6 ⁄8 2 ⁄32 ⁄4 23026K SNW-3026 SAF026K SR-22-19 LER117 76
15 1 1 3 1 1 1 3 1 13 3 1 3
SAF23028K 4 ⁄16 5 ⁄4 16 ⁄2 4 ⁄4 2 ⁄8 14 ⁄2 13 ⁄4 2 ⁄4 10 ⁄4 1 ⁄16 7 ⁄8 2 ⁄8 ⁄4 23028K SNW-3028 SAF028K SR- 0-20 LER122 90
3 3 1 3 5 1 9 5 13 7
SAF23030K 5 ⁄16 6 18 ⁄8 5 ⁄8 2 ⁄8 16 14 ⁄8 3 ⁄4 11 ⁄16 2 ⁄16 8 2 ⁄64 ⁄8 23030K SNW-3030 SAF030K SR- 0-21 LER125 125
7 3 1 3 5 1 9 1 11 7
SAF23032K 5 ⁄16 6 18 ⁄8 5 ⁄8 2 ⁄8 16 14 ⁄8 3 ⁄4 11 ⁄16 2 ⁄16 8 2 ⁄32 ⁄8 23032K SNW-3032 SAF032K SR- 0-22 LER130 132
15 1 7 3 1 3 3 3 3 33
SAF23034K 5 ⁄16 6 20 ⁄8 5 ⁄8 2 ⁄8 17 ⁄8 16 3 ⁄8 11 ⁄4 1 ⁄4 7 ⁄4 2 ⁄64 1 23034K SNW-3034 SAF034K SR- 0-24 LER140 154
7 11 1 5 1 3 3 5 3 3 11
SAF23036K 6 ⁄16 6 ⁄16 22 6 ⁄4 2 ⁄8 19 ⁄4 17 ⁄8 3 ⁄4 13 ⁄16 2 ⁄16 8 ⁄4 2 ⁄16 1 23036K SNW-3036 SAF036K SR- 0-26 LER148 212
15 11 1 5 1 3 3 5 15 3 47
SAF23038K 6 ⁄16 6 ⁄16 22 6 ⁄4 2 ⁄8 19 ⁄4 17 ⁄8 3 ⁄4 13 ⁄16 1 ⁄16 8 ⁄4 2 ⁄64 1 23038K SNW-3038 SAF038K SR-32- 0 LER155 220
3 1 3 3 3 5 3 1 9 13 3 15
SAF23040K 7 ⁄16 7 ⁄16 24 ⁄4 6 ⁄4 2 ⁄4 21 ⁄8 19 ⁄8 4 ⁄4 14 ⁄16 2 ⁄16 9 ⁄8 2 ⁄16 1 23040K SNW-3040 SAF040K SR-34- 0 LER159 295
15 7 1 1 3 5 1 11 3 3 5 1
SAF23044K 7 ⁄16 7 ⁄8 28 7 ⁄2 3 ⁄8 24 ⁄8 21 ⁄8 4 ⁄2 15 ⁄16 2 ⁄8 10 ⁄4 3 ⁄32 1 ⁄4 23044K SNW-3044 SAF044K SR-38-32 LER167 370
7 7 1 1 3 1 3 1 1 17 1 7 7
SAF23048K-8 ⁄16 8 ⁄16 8 ⁄4 29 ⁄2 8 3 ⁄8 25 22 ⁄2 5 17 ⁄16 2 ⁄4 11 ⁄8 3 ⁄32 1 ⁄4 23048K SNP-3048-8 ⁄16 SAF048K-8 ⁄16 A8897 LER526 430
1 1 1 1 3 1 3 1 1 17 1 1 1
SAF23048K-8 ⁄2 8 ⁄2 8 ⁄4 29 ⁄2 8 3 ⁄8 25 22 ⁄2 5 17 ⁄16 2 ⁄4 11 ⁄8 3 ⁄32 1 ⁄4 23048K SNP-3048-8 ⁄2 SAF048K-8 ⁄2 A8897 LER527 428
15 15 1 1 3 1 3 1 1 17 1 15 15
SAF23048K-8 ⁄16 8 ⁄16 8 ⁄4 29 ⁄2 8 3 ⁄8 25 22 ⁄2 5 17 ⁄16 2 ⁄4 11 ⁄8 3 ⁄32 1 ⁄4 23048K SNP-3048-8 ⁄16 SAF048K-8 ⁄16 A8897 LER529 422
1 1 3 1 3 1 1 17 1
SAF23048K-9 9 8 ⁄4 29 ⁄2 8 3 ⁄8 25 22 ⁄2 5 17 ⁄16 2 ⁄4 11 ⁄8 3 ⁄32 1 ⁄4 23048K SNP-3048-9 SAF048K-9 A8897 LER530 420
7 7 1 3 3 3 7 3 1 7 15 7 53 1 7 7
SAF23052K-9 ⁄16 9 ⁄16 9 ⁄2 32 ⁄4 8 ⁄4 3 ⁄4 27 ⁄8 24 ⁄4 5 ⁄4 19 ⁄16 2 ⁄16 11 ⁄8 3 ⁄64 1 ⁄2 23052K SNP-3052-9 ⁄16 SAF052K-9 ⁄16 A8898 LER178-1 587
1 1 1 3 3 3 7 3 1 7 15 7 53 1 1 1
SAF23052K-9 ⁄2 9 ⁄2 9 ⁄2 32 ⁄4 8 ⁄4 3 ⁄4 27 ⁄8 24 ⁄4 5 ⁄4 19 ⁄16 2 ⁄16 11 ⁄8 3 ⁄64 1 ⁄2 23052K SNP-3052-9 ⁄2 SAF052K-9 ⁄2 A8898 LER178 585
15 15 7 1 1 1 1 3 15 1 61 1 15 15
SAF23056K-9 ⁄16 9 ⁄16 9 ⁄8 34 ⁄4 9 4 29 ⁄2 26 ⁄4 5 ⁄2 20 ⁄16 2 ⁄16 12 ⁄16 3 ⁄64 1 ⁄2 23056K SNP-3056-9 ⁄16 SAF056K-9 ⁄16 A8819 ER751 640
7 1 1 1 1 3 15 1 61 1
SAF23056K-10 10 9 ⁄8 34 ⁄4 9 4 29 ⁄2 26 ⁄4 5 ⁄2 20 ⁄16 2 ⁄16 12 ⁄16 3 ⁄64 1 ⁄2 23056K SNP-3056-10 SAF056K-10 A8819 ER705 635
7 7 7 1 1 1 1 3 15 1 61 1 7 7
SAF23056K-10 ⁄16 10 ⁄16 9 ⁄8 34 ⁄4 9 4 29 ⁄2 26 ⁄4 5 ⁄2 20 ⁄16 2 ⁄16 12 ⁄16 3 ⁄64 1 ⁄2 23056K SNP-3056-10 ⁄16 SAF056K-10 ⁄16 A8819 ER745 625
1 1 7 1 1 1 1 3 15 1 61 1 1 1
SAF23056K-10 ⁄2 10 ⁄2 9 ⁄8 34 ⁄4 9 4 29 ⁄2 26 ⁄4 5 ⁄2 20 ⁄16 2 ⁄16 12 ⁄16 3 ⁄64 1 ⁄2 23056K SNP-3056-10 ⁄2 SAF056K-10 ⁄2 A8819 ER710 620
(1) (3)
See page 305 for recommended shaft diameter S-1 tolerances. Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting.
(2) (4)
“Housing Only” includes: cap, base, cap bolts, triple ring seals and stabilizing rings Includes sleeve, locknut, lockwasher or lockplate. Add shaft size to order.
as required. Note: Limiting speeds are found in dimension tables in the spherical roller bearing section.
inch inch inch inch inch inch inch inch inch inch inch inch inch lbs.
15
SDAF23060K-10 ⁄16 10 15⁄16 12 38 ⁄4
1
14 ⁄4
3
3 ⁄2
1
33 ⁄2
1 3
32 ⁄4 9
7
23 ⁄16
7
4 ⁄16 15 ⁄2
1 9
4 ⁄32
5
1 ⁄8 23060K SNP-3060-10
15
⁄16 SDAF060K-10
15
⁄16 A8967 ER858 1175
1 3 1 1 3 7 7 1 9 5
SDAF23060K-11 11 12 38 ⁄4 14 ⁄4 3 ⁄2 33 ⁄2 32 ⁄4 9 23 ⁄16 4 ⁄16 15 ⁄2 4 ⁄32 1 ⁄8 23060K SNP-3060-11 SDAF060K-11 A8967 ER825 1174
7 7 1 3 1 1 3 7 1 1 7 5 7 7
SDAF23064K-11 ⁄16 11 ⁄16 12 38 ⁄4 14 ⁄4 3 ⁄2 33 ⁄2 32 ⁄4 9 23 ⁄16 4 ⁄16 15 ⁄2 4 ⁄16 1 ⁄8 23064K SNP-3064-11 ⁄16 SDAF064K-11 ⁄16 A8968 ER861 1275
1 1 1 3 1 1 3 7 1 1 7 5 1 1
SDAF23064K-11 ⁄2 11 ⁄2 12 38 ⁄4 14 ⁄4 3 ⁄2 33 ⁄2 32 ⁄4 9 23 ⁄16 4 ⁄16 15 ⁄2 4 ⁄16 1 ⁄8 23064K SNP-3064-11 ⁄2 SDAF064K-11 ⁄2 A8968 ER832 1274
15 15 1 3 1 1 3 7 1 1 7 5 15 15
SDAF23064K-11 ⁄16 11 ⁄16 12 38 ⁄4 14 ⁄4 3 ⁄2 33 ⁄2 32 ⁄4 9 23 ⁄16 4 ⁄16 15 ⁄2 4 ⁄16 1 ⁄8 23064K SNP-3064-11 ⁄16 SDAF064K-11 ⁄16 A8968 ER859 1269
1 3 1 1 3 7 1 1 7 5
SDAF23064K-12 12 12 38 ⁄4 14 ⁄4 3 ⁄2 33 ⁄2 32 ⁄4 9 23 ⁄16 4 ⁄16 15 ⁄2 4 ⁄16 1 ⁄8 23064K SNP-3064-12 SDAF064K-12 A8968 ER818 1268
7 7 1 3 1 7 3 13 7 7 7
SDAF23068K-12 ⁄16 12 ⁄16 12 39 15 ⁄4 4 ⁄16 33 ⁄2 32 10 24 3 ⁄16 15 ⁄4 4 ⁄16 1 ⁄8 23068K SNP-3068-12 ⁄16 SDAF068K-12 ⁄16 A8969 ER865 1553
1 1 1 3 1 7 3 13 7 1 1
SDAF23068K-12 ⁄2 12 ⁄2 12 39 15 ⁄4 4 ⁄16 33 ⁄2 32 10 24 3 ⁄16 15 ⁄4 4 ⁄16 1 ⁄8 23068K SNP-3068-12 ⁄2 SDAF068K-12 ⁄2 A8969 ER866 1552
15 15 13 3 3 1 1 1 7 1 53 7 15 15
SDAF23072K-12 ⁄16 12 ⁄16 12 ⁄16 41 ⁄4 15 ⁄4 4 ⁄2 36 ⁄2 35 10 ⁄2 26 3 ⁄8 16 ⁄4 4 ⁄64 1 ⁄8 23072K SNP-3072-12 ⁄16 SDAF072K-12 ⁄16 A8970 ER869 1632
13 3 3 1 1 1 7 1 53 7
SDAF23072K-13 13 12 ⁄16 41 ⁄4 15 ⁄4 4 ⁄2 36 ⁄2 35 10 ⁄2 26 3 ⁄8 16 ⁄4 4 ⁄64 1 ⁄8 23072K SNP-3072-13 SDAF072K-13 A8970 ER846 1630
7 7 13 3 3 1 1 1 7 1 53 7 7 7
SDAF23072K-13 ⁄16 13 ⁄16 12 ⁄16 41 ⁄4 15 ⁄4 4 ⁄2 36 ⁄2 35 10 ⁄2 26 3 ⁄8 16 ⁄4 4 ⁄64 1 ⁄8 23072K SNP-3072-13 ⁄16 SDAF072K-13 ⁄16 A8970 ER872 1614
1 1 13 3 3 1 1 1 7 1 53 7 1 1
SDAF23072K-13 ⁄2 13 ⁄2 12 ⁄16 41 ⁄4 15 ⁄4 4 ⁄2 36 ⁄2 35 10 ⁄2 26 3 ⁄8 16 ⁄4 4 ⁄64 1 ⁄8 23072K SNP-3072-13 ⁄2 SDAF072K-13 ⁄2 A8970 ER823 1610
15
SDAF23076K-13 ⁄16 13 15⁄16 13
12 ⁄16 41 ⁄4
3
15 ⁄4
3
4 ⁄2
1
36 ⁄2
1
35 10 ⁄2
1
26
7
3 ⁄16 16 ⁄4
1 1
5 ⁄16
7
1 ⁄8 23076K SNP-3076-13
15
⁄16 SDAF076K-13
15
⁄16 A8971 ER875 1687
13 3 3 1 1 1 7 1 1 7
SDAF23076K-14 14 12 ⁄16 41 ⁄4 15 ⁄4 4 ⁄2 36 ⁄2 35 10 ⁄2 26 3 ⁄16 16 ⁄4 5 ⁄16 1 ⁄8 23076K SNP-3076-14 SDAF076K-14 A8971 ER876 1685
(1) (3)
See page 305 for recommended shaft diameter S-1 tolerances. Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting.
(2) (4)
“Housing Only” includes: cap, base, cap bolts, triple ring seals and stabilizing rings Includes sleeve, locknut, lockwasher or lockplate. Add shaft size to order.
as required. Note: Limiting speeds are found in dimension tables in the spherical roller bearing section.
300
units. To order float units, specify part number plus suffix “Float” or
“FL”. E F
desired, add the letter “S” to the alpha prefix (i.e.SDAFS 23152K).
inch inch inch inch inch inch inch inch inch inch inch inch lbs.
1 1 1 3 1 3 7 3 3 5
9 ⁄2 10 ⁄4 13 ⁄8 3 ⁄4 30 ⁄2 8 ⁄4 20 ⁄8 3 ⁄8 13 ⁄4 1 ⁄8
SDAF23152K
SDAF23156K
SDAF23160K
15
9 ⁄16
15
10 ⁄16
12
12
35
1
38 ⁄4
1
38 ⁄4
3
14 ⁄4
3
14 ⁄4
3
3 ⁄8
3
3 ⁄8
1
33 ⁄2
1
33 ⁄2
29
3
32 ⁄4
3
32 ⁄4
9
9
7
23 ⁄16
7
23 ⁄16
3
4 ⁄4
1
4 ⁄8
3
15 ⁄8
3
15 ⁄8
5
1 ⁄8
5
1 ⁄8
23152K
23156K
23160K
SNP-3152
SNP-3156
SNP-3160
SDAF3152K
SDAF3156K
SDAF3160K
A5679
A8967
A8975
ER937
ER940
ER858
1050
1300
1350
2
15 13 3 3 1 1 1 3 3 1 7
SDAF23164K 11 ⁄16 12 ⁄16 41 ⁄4 15 ⁄4 4 ⁄2 36 ⁄2 35 10 ⁄2 25 ⁄4 4 ⁄8 16 ⁄4 1 ⁄8 23164K SNP-3164 SDAF3164K A8970 ER942 1900
7 3 3 1 3 3 7 15 1
SDAF23168K 12 ⁄16 14 43 ⁄4 17 ⁄4 5 38 ⁄4 36 ⁄4 10 ⁄4 27 ⁄8 4 ⁄16 18 ⁄4 2 23168K SNP-3168 SDAF3168K A8977 ER944 2550
7 1 1 1 3 1 7 1
SDAF23172K 13 ⁄16 14 ⁄2 46 17 ⁄8 5 ⁄4 40 ⁄4 39 ⁄4 11 28 ⁄8 5 17 ⁄2 2 23172K SNP-3172 SDAF3172K A8974 ER872 2600
15 1 1 1 3 1 7 5 1
SDAF23176K 13 ⁄16 14 ⁄2 46 17 ⁄8 5 ⁄4 40 ⁄4 39 ⁄4 11 28 ⁄8 4 ⁄8 17 ⁄2 2 23176K SNP-3176 SDAF3176K A8978 ER875 2600
1 3 3 1 1 3 1 1 1 1 1
SDAF23180K 15 15 ⁄2 48 ⁄4 18 ⁄4 5 ⁄2 43 ⁄2 41 ⁄4 12 ⁄4 30 ⁄2 5 ⁄8 19 ⁄4 2 ⁄4 23180K SNP-3180 SDAF3180K A8979 ER847 3000
3 1 1 3 1 3 3 1
SDAF23184K 15 ⁄4 17 52 21 5 ⁄2 46 ⁄8 44 ⁄8 14 ⁄2 33 ⁄4 6 21 ⁄4 2 ⁄4 23184K SNP-3184 SDAF3184K A8984 ER914 4400
1 1 1 3 1 3 9 3 1
SDAF23188K 16 ⁄2 17 52 21 5 ⁄2 46 ⁄8 44 ⁄8 14 ⁄2 33 ⁄4 5 ⁄16 21 ⁄4 2 ⁄4 23188K SNP-3188 SDAF3188K A8976 ER947 4600
1 5 3 7 1 3 1 1
SDAF23192K 17 18 54 ⁄4 21 ⁄8 5 ⁄4 48 ⁄8 47 ⁄8 15 35 ⁄4 6 22 ⁄4 2 ⁄2 23192K SNP-3192 SDAF3192K A8990 ER838 5100
1 5 3 7 1 3 1 1 1
SDAF23196K 18 18 54 ⁄4 21 ⁄8 5 ⁄4 48 ⁄8 47 ⁄8 15 35 ⁄4 5 ⁄2 22 ⁄4 2 ⁄2 23196K SNP-3196 SDAF3196K A8998 ER954 5200
(1) (3)
See page 305 for recommended shaft diameter S-1 tolerances. Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting.
(2) (4)
“Housing Only” includes: cap, base, cap bolts, triple ring seals and stabilizing rings Includes sleeve, locknut and lockplate. Add shaft size to order.
as required. Add shaft size to order. Note: Limiting speeds are found in dimension tables in the spherical roller bearing section.
inch inch inch inch inch inch inch inch inch inch inch inch lbs.
15 1 1 3 1 3 7 9 3 5
SDAF23248K 8 ⁄16 10 ⁄4 35 13 ⁄8 3 ⁄4 30 ⁄2 29 8 ⁄4 20 ⁄8 3 ⁄16 13 ⁄4 1 ⁄8 23248K SNP-148 SDAF3248K A5679 ER939 1100
7 1 3 3 1 3 7 3 3 5
SDAF23252K 9 ⁄16 12 38 ⁄4 14 ⁄4 3 ⁄8 33 ⁄2 32 ⁄4 9 23 ⁄16 4 ⁄4 15 ⁄8 1 ⁄8 23252K SNP-152 SDAF3252K A8968 ER937 1400
7 1 3 3 1 3 7 3 3 5
SDAF23256K 10 ⁄16 12 38 ⁄4 14 ⁄4 3 ⁄8 33 ⁄2 32 ⁄4 9 23 ⁄16 4 ⁄8 15 ⁄8 1 ⁄8 23256K SNP-3256 SDAF3256K A8975 ER940 1400
15 13 3 3 1 1 1 3 1 1 7
SDAF23260K 10 ⁄16 12 ⁄16 41 ⁄4 15 ⁄4 4 ⁄2 36 ⁄2 35 10 ⁄2 25 ⁄4 4 ⁄2 16 ⁄4 1 ⁄8 23260K SNP-3260 SDAF3260K A8970 ER941 1900
15 3 3 1 3 3 7 1 1
SDAF23264K 11 ⁄16 14 43 ⁄4 17 ⁄4 5 38 ⁄4 36 ⁄4 10 ⁄4 27 ⁄8 5 ⁄8 18 ⁄4 2 23264K SNP-3264 SDAF3264K A8977 ER942 2600
7 1 1 1 3 1 7 1
SDAF23268K 12 ⁄16 14 ⁄2 46 17 ⁄8 5 ⁄4 40 ⁄4 39 ⁄4 11 28 ⁄8 5 17 ⁄2 2 23268K SNP-3268 SDAF3268K A8978 ER944 2700
7 1 3 3 1 1 3 1 1 1 1 1
SDAF23272K 13 ⁄16 15 ⁄2 48 ⁄4 18 ⁄4 5 ⁄2 43 ⁄2 41 ⁄4 12 ⁄4 30 ⁄2 5 ⁄2 19 ⁄4 2 ⁄4 23272K SNP-3272 SDAF3272K A8979 ER872 3050
15 1 3 3 1 1 3 1 1 3 1 1
SDAF23276K 13 ⁄16 15 ⁄2 48 ⁄4 18 ⁄4 5 ⁄2 43 ⁄2 41 ⁄4 12 ⁄4 30 ⁄2 4 ⁄8 19 ⁄4 2 ⁄4 23276K SNP-3276 SDAF3276K A8980 ER875 3000
1 1 3 1 3 3 1
SDAF23280K 15 17 52 21 5 ⁄2 46 ⁄8 44 ⁄8 14 ⁄2 33 ⁄4 6 21 ⁄4 2 ⁄4 23280K SNP-3280 SDAF3280K A8976 ER847 4650
3 1 5 3 7 1 3 3 1 1
SDAF23284K 15 ⁄4 18 54 ⁄4 21 ⁄8 5 ⁄4 48 ⁄8 47 ⁄8 15 35 ⁄4 6 ⁄8 22 ⁄4 2 ⁄2 23284K SNP-3284 SDAF3284K A8990 ER951 4900
1 1 5 3 7 1 3 7 1 1
SDAF23288K 16 ⁄2 18 54 ⁄4 21 ⁄8 5 ⁄4 48 ⁄8 47 ⁄8 15 35 ⁄4 5 ⁄8 22 ⁄4 2 ⁄2 23288K SNP-3288 SDAF3288K A8988 ER952 5200
(1) (3)
See page 305 for recommended shaft diameter S-1 tolerances. Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting.
(2) (4)
“Housing Only” includes: cap, base, cap bolts, triple ring seals and stabilizing rings Includes sleeve, locknut and lockplate. Add shaft size to order.
as required. Add shaft size to order. Note: Limiting speeds are found in dimension tables in the spherical roller bearing section.
301
Each assembly includes the housing cap and base, cap bolts,
bearing, locknut and washer, stabilizing ring, and triple ring seals. L
H S-2
If the pillow block housing only is desired use the numbers listed in S-3
column headed “Housing Only”. These units include: cap, base, cap Y
inch inch inch inch inch inch inch inch inch inch inch inch inch inch lbs.
15 3 3 1 1 7 1 7 15 27 3
SAF22217 3 ⁄16 3 ⁄16 3 ⁄4 13 3 ⁄2 1 ⁄4 11 9 ⁄8 — 7 ⁄4 1 ⁄16 4 ⁄16 1 ⁄64 2 ⁄4 22217 AN17 W17 SAF217 SR-17-14 LER89 LER63 43
15 3 3 1 1 7 1 1 7 15 27 5
FSAF22217 3 ⁄16 3 ⁄16 3 ⁄4 13 3 ⁄2 1 ⁄4 11 9 ⁄8 2 ⁄8 7 ⁄4 1 ⁄16 4 ⁄16 1 ⁄64 4 ⁄8 22217 AN17 W17 FSAF217 SR-17-14 LER89 LER63 43
1 3 3 7 1 5 3 3 17 1 37 3
SAF22218 4 ⁄8 3 ⁄8 4 13 ⁄4 3 ⁄8 1 ⁄2 11 ⁄8 10 ⁄8 — 7 ⁄4 1 ⁄32 6 ⁄4 1 ⁄64 2 ⁄4 22218 AN18 W18 SAF218 SR-18-15 LER96 LER72 50
1 3 3 7 1 5 3 1 3 17 1 37 5
FSAF22218 4 ⁄8 3 ⁄8 4 13 ⁄4 3 ⁄8 1 ⁄2 11 ⁄8 10 ⁄8 2 ⁄8 7 ⁄4 1 ⁄32 6 ⁄4 1 ⁄64 4 ⁄8 22218 AN18 W18 FSAF218 SR-18-15 LER96 LER72 50
1 13 1 1 3 3 1 5 11 3 49 7
SAF22220 4 ⁄2 3 ⁄16 4 ⁄2 15 ⁄4 4 ⁄8 1 ⁄4 13 ⁄8 11 ⁄8 — 8 ⁄16 1 ⁄4 6 1 ⁄64 2 ⁄8 22220 AN20 W20 SAF220 SR-20-17 LER118 LER106 71
1 13 1 1 3 3 1 5 3 11 3 49 3
FSAF22220 4 ⁄2 3 ⁄16 4 ⁄2 15 ⁄4 4 ⁄8 1 ⁄4 13 ⁄8 11 ⁄8 2 ⁄8 8 ⁄16 1 ⁄4 6 1 ⁄64 4 ⁄4 22220 AN20 W20 FSAF220 SR-20-17 LER118 LER106 71
7 3 15 1 3 1 5 3 9 7 3 61 3
SAF22222 4 ⁄8 4 ⁄16 4 ⁄16 16 ⁄2 4 ⁄4 2 14 ⁄2 12 ⁄8 2 ⁄4 9 ⁄16 1 ⁄8 6 ⁄8 1 ⁄64 4 ⁄4 22222 AN22 W22 SAF222 SR-22-19 LER121 LER113 81
5 9 1 1 3 1 1 1 3 1 15 3 3 3
SAF22224 5 ⁄16 4 ⁄16 5 ⁄4 16 ⁄2 4 ⁄4 2 ⁄8 14 ⁄2 13 ⁄4 2 ⁄4 10 ⁄4 1 ⁄16 7 ⁄8 2 ⁄32 4 ⁄4 22224 AN24 W24 SAF224 SR-24-20 LER127 LER119 90
7 15 3 1 3 5 1 9 7 17 7
SAF22226 5 ⁄8 4 ⁄16 6 18 ⁄8 5 ⁄8 2 ⁄8 16 14 ⁄8 3 ⁄4 11 ⁄16 2 ⁄16 8 2 ⁄64 4 ⁄8 22226 AN26 W26 SAF226 SR-26-0 LER136 LER122 127
1 5 1 7 3 1 3 3 1 3 13
SAF22228 6 ⁄4 5 ⁄16 6 20 ⁄8 5 ⁄8 2 ⁄8 17 ⁄8 16 3 ⁄8 11 ⁄4 2 ⁄8 7 ⁄4 2 ⁄32 4 1 22228 AN28 W28 SAF228 SR-28-0 LER144 LER127 149
5 3 5 1 1 1 1 3 1 3 3 37
SAF22230 6 ⁄8 5 ⁄4 6 ⁄16 21 ⁄4 6 ⁄4 2 ⁄2 18 ⁄4 17 3 ⁄4 12 ⁄2 2 ⁄16 8 ⁄8 2 ⁄64 4 1 22230 AN30 W30 SAF230 SR-30-0 LER151 LER134 175
1 11 1 5 1 3 3 5 3 3 49
SAF22232 7 6 ⁄16 6 ⁄16 22 6 ⁄4 2 ⁄8 19 ⁄4 17 ⁄8 3 ⁄4 13 ⁄16 2 ⁄16 8 ⁄4 2 ⁄64 4 1 22232 AN32 W32 SAF232 SR-32-0 LER156 LER142 210
7 7 1 3 3 3 5 3 1 9 5 3 59
SAF22234 7 ⁄16 6 ⁄16 7 ⁄16 24 ⁄4 6 ⁄4 2 ⁄4 21 ⁄8 19 ⁄8 4 ⁄4 14 ⁄16 2 ⁄16 9 ⁄8 2 ⁄64 4 1 22234 AN34 W34 SAF234 SR-34-0 LER161 LER148 280
13 7 1 3 1 5 7 5 1 9 11 61
SAF22236 7 ⁄16 6 ⁄8 7 ⁄2 26 ⁄4 7 ⁄8 3 23 ⁄8 20 ⁄8 4 ⁄8 15 ⁄2 2 ⁄16 9 ⁄16 2 ⁄64 4 1 22236 AN36 W36 SAF236 SR-36-0 LER165 LER154 305
3 1 7 1 1 3 5 1 11 5 3 7 1
SAF22238 8 ⁄8 7 ⁄4 7 ⁄8 28 7 ⁄2 3 ⁄8 24 ⁄8 21 ⁄8 4 ⁄2 15 ⁄16 2 ⁄8 10 ⁄4 3 ⁄64 4 1 ⁄4 22238 AN38 W38 SAF238 SR-38-32 LER171 LER160 350
3 5 1 1 3 1 3 11 13 9 1
SAF22240 8 ⁄4 7 ⁄8 8 ⁄4 29 ⁄2 8 3 ⁄8 25 22 ⁄2 5 17 ⁄16 2 ⁄16 10 ⁄16 3 ⁄32 4 1 ⁄4 22240 AN40 W40 SAF240 SR-40-34 LER175 LER164 420
9 5 1 3 3 3 7 3 1 5 3 1 17 1
SAF22244 9 ⁄16 8 ⁄16 9 ⁄2 32 ⁄4 8 ⁄4 3 ⁄4 27 ⁄8 24 ⁄4 5 ⁄4 19 ⁄8 3 ⁄8 11 ⁄2 3 ⁄32 4 1 ⁄2 22244 N44 W44 SAF244 SR-44-38 LER179 LER170 590
(1) (3)
See page 305 for recommended shaft diameter S-2, S-3 tolerances. Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting.
(2)
“Housing Only” includes: cap, base, cap bolts, triple ring seals and stabilizing rings as required. Note: Limiting speeds are found in dimension tables in the spherical roller bearing section.
For threading information, see Adapter Accessories pages.
inch inch inch inch inch inch inch inch inch inch inch inch inch inch lbs.
15 3 1 1 3 3 1 5 11 13 57 7
SAF22317 3 ⁄16 3 ⁄16 4 ⁄2 15 ⁄4 4 ⁄8 1 ⁄4 13 ⁄8 11 ⁄8 — 8 ⁄16 1 ⁄16 6 1 ⁄64 2 ⁄8 22317 AN17 W17 SAF317 SR-20-17 LER109 LER188 80
15 3 1 1 3 3 1 5 3 11 13 57 3
FSAF22317 3 ⁄16 3 ⁄16 4 ⁄2 15 ⁄4 4 ⁄8 1 ⁄4 13 ⁄8 11 ⁄8 2 ⁄8 8 ⁄16 1 ⁄16 6 1 ⁄64 4 ⁄4 22317 AN17 W17 FSAF317 SR-20-17 LER109 LER188 80
1 3 3 1 3 1 1 3 3 3
SAF22318 4 ⁄8 3 ⁄8 4 ⁄4 15 ⁄2 4 ⁄8 2 13 ⁄2 12 2 ⁄4 9 ⁄16 2 7 2 ⁄64 4 ⁄4 22318 AN18 W18 FSAF318 SR-21-18 LER112 LER191 92
1 13 1 1 3 1 1 1 3 1 1 3 19 3
SAF22320 4 ⁄2 3 ⁄16 5 ⁄4 16 ⁄2 4 ⁄4 2 ⁄8 14 ⁄2 13 ⁄4 2 ⁄4 10 ⁄4 2 ⁄8 7 ⁄8 2 ⁄64 4 ⁄4 22320 AN20 W20 SAF320 SR-24-20 LER118 LER106 109
7 3 3 1 3 5 1 9 1 31 7
SAF22322 4 ⁄8 4 ⁄16 6 18 ⁄8 5 ⁄8 2 ⁄8 16 14 ⁄8 3 ⁄4 11 ⁄16 2 ⁄2 8 2 ⁄64 4 ⁄8 22322 AN22 W22 SAF322 SR-0-22 LER121 LER113 145
5 9 5 1 1 1 1 3 1 9 3 41
SAF22324 5 ⁄16 4 ⁄16 6 ⁄16 21 ⁄4 6 ⁄4 2 ⁄2 18 ⁄4 17 3 ⁄4 12 ⁄2 2 ⁄16 8 ⁄8 2 ⁄64 4 1 22324 AN24 W24 SAF324 SR-0-24 LER127 LER119 195
7 15 11 1 5 1 3 3 15 5 3 27
SAF22326 5 ⁄8 4 ⁄16 6 ⁄16 22 6 ⁄4 2 ⁄8 19 ⁄4 17 ⁄8 3 ⁄4 13 ⁄16 2 ⁄8 8 ⁄4 2 ⁄32 4 1 22326 AN26 W26 SAF326 SR-0-26 LER136 LER122 235
1 5 1 3 3 3 5 3 1 9 11 3 5
SAF22328 6 ⁄4 5 ⁄16 7 ⁄16 24 ⁄4 6 ⁄4 2 ⁄4 21 ⁄8 19 ⁄8 4 ⁄4 14 ⁄16 2 ⁄16 9 ⁄8 3 ⁄64 4 1 22328 AN28 W28 SAF328 SR-0-28 LER144 LER127 300
5 3 1 3 1 5 7 5 1 7 11 17
SAF22330 6 ⁄8 5 ⁄4 7 ⁄2 26 ⁄4 7 ⁄8 3 23 ⁄8 20 ⁄8 4 ⁄8 15 ⁄2 2 ⁄8 9 ⁄16 3 ⁄64 4 1 22330 AN30 W30 SAF330 SR-36-30 LER151 LER134 335
1 7 1 1 3 5 1 11 15 3 7 1
SAF22332 7 6 ⁄16 7 ⁄8 28 7 ⁄2 3 ⁄8 24 ⁄8 21 ⁄8 4 ⁄2 15 ⁄16 2 ⁄16 10 ⁄4 3 ⁄16 4 1 ⁄4 22332 AN32 W32 SAF332 SR-38-32 LER156 LER142 405
7 7 1 1 3 1 3 1 13 19 1
SAF22334 7 ⁄16 6 ⁄16 8 ⁄4 29 ⁄2 8 3 ⁄8 25 22 ⁄2 5 17 ⁄16 3 ⁄16 10 ⁄16 3 ⁄32 4 1 ⁄4 22334 AN34 W34 SAF334 SR-40-34 LER161 LER148 465
13 7 7 1 1 1 5 1 1 3 1 47 1
SAF22336 7 ⁄16 6 ⁄8 8 ⁄8 31 ⁄4 8 ⁄4 3 ⁄2 26 ⁄8 24 5 ⁄4 18 ⁄2 3 ⁄8 11 ⁄4 3 ⁄64 4 1 ⁄4 22336 AN36 W36 SAF336 SR-0-36 LER165 LER154 525
3 1 1 3 3 3 7 3 1 5 11 1 57 1
SAF22338 8 ⁄8 7 ⁄4 9 ⁄2 32 ⁄4 8 ⁄4 3 ⁄4 27 ⁄8 24 ⁄4 5 ⁄4 19 ⁄8 3 ⁄16 11 ⁄2 3 ⁄64 4 1 ⁄2 22338 AN38 W38 SAF338 SR-44-38 LER171 LER160 635
3 5 7 1 1 1 1 3 3 1 5 1
SAF22340 8 ⁄4 7 ⁄8 9 ⁄8 34 ⁄4 9 4 29 ⁄2 26 ⁄4 5 ⁄2 20 ⁄16 3 ⁄4 12 ⁄4 4 ⁄64 4 1 ⁄2 22340 AN40 W40 SAF340 SR-0-40 LER175 LER164 700
(1) (3)
See page 305 for recommended shaft diameter S-2, S-3 tolerances. Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting.
(2)
“Housing Only” includes: cap, base, cap bolts, triple ring seals and stabilizing rings as required. Note: Limiting speeds are found in dimension tables in the spherical roller bearing section.
302
column headed “Housing Only”. These units include: cap, base, cap A
bolts, triple ring seals, and stabilizing ring.
D K FLOAT
Assembly and pillow blocks as described above, constitute fixed END
units. To order float units, specify part number plus suffix “Float” or “FL”.
All assemblies shown are furnished in cast iron. If cast steel is E F
B C
desired, add the letter “S” to the alpha prefix (i.e.SDAFS 22220).
inch inch inch inch inch inch inch inch inch inch inch inch inch inch lbs.
1 13 1 1 7 1 5 3 15 3 3 49 3
SDAF22220 4 ⁄2 3 ⁄16 4 ⁄2 15 ⁄4 6 1 ⁄8 13 ⁄8 11 ⁄8 3 ⁄8 8 ⁄16 1 ⁄4 6 ⁄4 1 ⁄64 4 ⁄4 22220 AN20 W20 SDAF220 SR-20-17 LER118 LER106 81
SDAF22222
SDAF22224
7
5
3
9
15
1
1
4 ⁄8 4 ⁄16 4 ⁄16 16 ⁄2
1
5 ⁄16 4 ⁄16 5 ⁄4 16 ⁄2
3
6 ⁄4
7
6 ⁄8
1
2 ⁄8
1
2 ⁄4
1
14 ⁄2
1
14 ⁄2
5
12 ⁄8
1
13 ⁄4
4
1
4 ⁄8
7
9 ⁄8
1
10 ⁄2
7
15
1
1 ⁄8 7 ⁄4
3
1 ⁄16 7 ⁄8
61
1 ⁄64 4
3
2 ⁄32 4
7
7
⁄8
⁄8
22222
22224
AN22
AN24
W22
W24
SDAF222
SDAF224
SR-22-19 LER121 LER113
SR-24-20 LER127 LER119
109
113 2
7 15 3 1 3 5 1 7 7 17
SDAF22226 5 ⁄8 4 ⁄16 6 18 ⁄8 7 ⁄2 2 ⁄8 16 14 ⁄8 4 ⁄2 11 ⁄8 2 ⁄16 8 2 ⁄64 4 1 22226 AN26 W26 SDAF226 SR-26-0 LER136 LER122 151
1 5 1 1 3 1 1 1 1 13 13
SDAF22228 6 ⁄4 5 ⁄16 6 20 ⁄8 7 ⁄2 2 ⁄8 17 ⁄8 16 4 ⁄2 12 ⁄16 2 ⁄8 7 ⁄16 2 ⁄32 4 1 22228 AN28 W28 SDAF228 SR-28-0 LER144 LER127 175
5 3 5 1 7 1 1 3 13 3 3 37 1
SDAF22230 6 ⁄8 5 ⁄4 6 ⁄16 21 ⁄4 7 ⁄8 2 ⁄2 18 ⁄4 17 4 ⁄4 12 ⁄16 2 ⁄16 8 ⁄8 2 ⁄64 4 1 ⁄8 22230 AN30 W30 SDAF230 SR-30-0 LER151 LER134 201
1 11 1 1 1 3 11 3 3 49 1
SDAF22232 7 6 ⁄16 6 ⁄16 22 8 ⁄4 2 ⁄2 19 ⁄4 17 ⁄8 5 13 ⁄16 2 ⁄16 8 ⁄4 2 ⁄64 4 1 ⁄8 22232 AN32 W32 SDAF232 SR-32-0 LER156 LER142 245
7 7 1 3 1 5 3 1 1 5 5 59 1
SDAF22234 7 ⁄16 6 ⁄16 7 ⁄16 24 ⁄4 9 2 ⁄2 21 ⁄8 19 ⁄8 5 ⁄2 14 ⁄4 2 ⁄16 9 ⁄8 2 ⁄64 4 1 ⁄4 22234 AN34 W34 SDAF234 SR-34-0 LER161 LER148 300
13 7 1 3 3 3 5 7 7 3 9 61 1
SDAF22236 7 ⁄16 6 ⁄8 7 ⁄2 26 ⁄4 9 ⁄8 2 ⁄4 23 ⁄8 20 ⁄8 5 ⁄8 15 ⁄16 2 ⁄16 10 2 ⁄64 4 1 ⁄4 22236 AN36 W36 SDAF236 SR-36-30 LER165 LER154 335
3 1 7 5 1 1 1 1 5 5 7 3
SDAF22238 8 ⁄8 7 ⁄4 7 ⁄8 27 ⁄8 10 3 23 ⁄2 21 ⁄2 6 ⁄4 16 ⁄4 2 ⁄8 10 ⁄8 3 ⁄64 4 1 ⁄8 22238 AN38 W38 SDAF238 SR-38-32 LER240 LER229 405
3 5 1 3 1 1 3 1 11 1 9 3
SDAF22240 8 ⁄4 7 ⁄8 8 ⁄4 28 ⁄4 10 ⁄2 3 ⁄4 25 23 6 ⁄4 17 ⁄8 2 ⁄16 11 ⁄8 3 ⁄32 4 1 ⁄8 22240 AN40 W40 SDAF240 SR-40-34 LER244 LER233 465
9 5 1 1 1 7 5 1 1 3 7 17 1
SDAF22244 9 ⁄16 8 ⁄16 9 ⁄2 32 11 ⁄4 3 ⁄2 27 ⁄8 25 ⁄8 7 ⁄4 19 ⁄4 3 ⁄8 11 ⁄8 3 ⁄32 4 1 ⁄2 22244 N44 W44 SDAF240 SR-44-38 LER248 LER239 650
(1) (3)
See page 305 for recommended shaft diameter S-2, S-3 tolerances. Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting.
(2)
“Housing Only” includes: cap, base, cap bolts, triple ring seals and stabilizing rings as required. Note: Limiting speeds are found in dimension tables in the spherical roller bearing section.
inch inch inch inch inch inch inch inch inch inch inch inch inch inch lbs.
15 3 1 1 7 1 5 3 15 3 3 57 3
SDAF22317 3 ⁄16 3 ⁄16 4 ⁄2 15 ⁄4 6 1 ⁄8 13 ⁄8 11 ⁄8 3 ⁄8 8 ⁄16 1 ⁄16 6 ⁄4 1 ⁄64 4 ⁄4 22317 AN17 W17 SDAF317 SR-20-17 LER109 LER188 80
1 3 3 1 1 1 5 7 7 3 3
SDAF22318 4 ⁄8 3 ⁄8 4 ⁄4 15 ⁄2 6 ⁄8 2 13 ⁄2 12 3 ⁄8 9 ⁄16 2 6 ⁄8 2 ⁄64 4 ⁄4 22318 AN18 W18 SDAF318 SR-21-18 LER112 LER191 92
1 13 1 1 7 1 1 1 1 1 1 3 19 7
SDAF22320 4 ⁄2 3 ⁄16 5 ⁄4 16 ⁄2 6 ⁄8 2 ⁄4 14 ⁄2 13 ⁄4 4 ⁄8 10 ⁄2 2 ⁄8 7 ⁄8 2 ⁄64 4 ⁄8 22320 AN20 W20 SDAF320 SR-24-20 LER118 LER106 109
7 3 3 1 3 5 1 7 1 31
SDAF22322 4 ⁄8 4 ⁄16 6 18 ⁄8 7 ⁄2 2 ⁄8 16 14 ⁄8 4 ⁄2 11 ⁄8 2 ⁄2 8 2 ⁄64 4 1 22322 AN22 W22 SDAF322 SR-0-22 LER121 LER113 145
5 9 5 1 7 1 1 3 13 9 3 41 1
SDAF22324 5 ⁄16 4 ⁄16 6 ⁄16 21 ⁄4 7 ⁄8 2 ⁄2 18 ⁄4 17 4 ⁄4 12 ⁄16 2 ⁄16 8 ⁄8 2 ⁄64 4 1 ⁄8 22324 AN24 W24 SDAF324 SR-0-24 LER127 LER119 195
7 15 11 1 1 1 3 11 5 3 27 1
SDAF22326 5 ⁄8 4 ⁄16 6 ⁄16 22 8 ⁄4 2 ⁄2 19 ⁄4 17 ⁄8 5 13 ⁄16 2 ⁄8 8 ⁄4 2 ⁄64 4 1 ⁄8 22326 AN26 W26 SDAF326 SR-0-26 LER136 LER122 280
1 5 1 3 1 5 3 1 1 11 5 5 1
SDAF22328 6 ⁄4 5 ⁄16 7 ⁄16 24 ⁄4 9 2 ⁄2 21 ⁄8 19 ⁄8 5 ⁄2 14 ⁄4 2 ⁄16 9 ⁄8 3 ⁄64 4 1 ⁄4 22328 AN28 W28 SDAF328 SR-0-28 LER144 LER127 305
5 3 1 3 3 3 5 7 7 3 7 3 17 1
SDAF22330 6 ⁄8 5 ⁄4 7 ⁄2 26 ⁄4 9 ⁄8 2 ⁄4 23 ⁄8 20 ⁄8 5 ⁄8 15 ⁄16 2 ⁄8 9 ⁄4 3 ⁄64 4 1 ⁄4 22330 AN30 W30 SDAF330 SR-36-30 LER151 LER134 375
1 7 5 1 1 1 1 15 5 7 3
SDAF22332 7 6 ⁄16 7 ⁄8 27 ⁄8 10 3 23 ⁄2 21 ⁄2 6 ⁄4 16 ⁄4 2 ⁄16 10 ⁄8 3 ⁄16 4 1 ⁄8 22332 AN32 W32 SDAF332 SR-38-32 LER225 LER217 445
7 7 1 3 1 1 3 1 1 1 19 3
SDAF22334 7 ⁄16 6 ⁄16 8 ⁄4 28 ⁄4 10 ⁄2 3 ⁄4 25 23 6 ⁄4 17 ⁄8 3 ⁄16 11 ⁄8 3 ⁄32 4 1 ⁄8 22334 AN34 W34 SDAF334 SR-40-34 LER230 LER220 525
13 7 7 1 3 1 3 1 7 15 3 3 47 1
SDAF22336 7 ⁄16 6 ⁄8 8 ⁄8 30 ⁄2 10 ⁄4 3 ⁄4 26 ⁄8 24 ⁄8 6 ⁄8 17 ⁄16 3 ⁄8 11 ⁄8 3 ⁄64 4 1 ⁄2 22336 AN36 W36 SDAF336 SR-0-36 LER234 LER223 635
3 1 1 1 1 7 5 1 1 11 13 57 1
SDAF22338 8 ⁄8 7 ⁄4 9 ⁄2 32 11 ⁄4 3 ⁄2 27 ⁄8 25 ⁄8 7 ⁄4 19 ⁄4 3 ⁄16 11 ⁄16 3 ⁄64 4 1 ⁄2 22338 AN38 W38 SDAF338 SR-44-38 LER240 LER229 700
3 5 7 1 3 1 1 5 5 15 3 1 5 5
SDAF22340 8 ⁄4 7 ⁄8 9 ⁄8 33 ⁄2 11 ⁄4 3 ⁄2 29 ⁄4 26 ⁄8 7 ⁄8 19 ⁄16 3 ⁄4 12 ⁄4 4 ⁄64 4 1 ⁄8 22340 AN40 W40 SDAF340 SR-0-40 LER244 LER233 725
(1) (3)
See page 305 for recommended shaft diameter S-2, S-3 tolerances. Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting.
(2)
“Housing Only” includes: cap, base, cap bolts, triple ring seals and stabilizing rings as required. Note: Limiting speeds are found in dimension tables in the spherical roller bearing section.
303
Each assembly includes the housing cap and base, cap bolts,
bearing, locknut and washer, stabilizing ring, and triple ring seals.
If the pillow block housing only is desired use the numbers listed in H L
S-2
S-3
column headed “Housing Only”. These units include: cap, base, cap
Y
bolts, triple ring seals, and stabilizing ring.
A
Assembly and pillow blocks as described above, constitute fixed
units. To order float units, specify part number plus suffix “Float” or D K FLOAT
END
“FL”.
All assemblies shown are furnished in cast iron. If cast steel is E F
desired, add the letter “S” to the alpha prefix (i.e. SDAFS 23152). B C
For fixed applications both stabilizing rings must be used. Do not
use stabilizing rings for “float” mounting.
inch inch inch inch inch inch inch inch inch inch inch inch inch lbs.
1 15 1 1 3 1 3 7 3 1 5
SDAF23152 11 ⁄2 9 ⁄16 10 ⁄4 35 13 ⁄8 3 ⁄4 30 ⁄2 29 8 ⁄4 20 ⁄8 3 ⁄8 14 ⁄4 1 ⁄8 23152 NO52 P52 SDAF3152 A5679 ER832 ER845 1050
1 3 1 3 3 1 3 7 3 7 5
SDAF23156 12 ⁄2 10 ⁄4 12 38 ⁄4 14 ⁄4 3 ⁄8 33 ⁄2 32 ⁄4 9 23 ⁄16 4 ⁄4 15 ⁄8 1 ⁄8 23156 NO56 P56 SDAF3156 A8967 ER866 ER826 1250
1 1 3 3 1 3 7 1 7 5
SDAF23160 13 11 ⁄2 12 38 ⁄4 14 ⁄4 3 ⁄8 33 ⁄2 32 ⁄4 9 23 ⁄16 4 ⁄8 15 ⁄8 1 ⁄8 23160 NO60 P60 SDAF3160 A8975 ER824 ER832 1350
5 13 3 3 1 1 1 3 3 3 7
SDAF23164 14 12 ⁄16 12 ⁄16 41 ⁄4 15 ⁄4 4 ⁄2 36 ⁄2 35 10 ⁄2 25 ⁄4 4 ⁄8 16 ⁄4 1 ⁄8 23164 NO64 P64 SDAF3164 A8970 ER876 ER943 1850
1 3 3 1 3 3 7 15 3
SDAF23168 15 13 ⁄16 14 43 ⁄4 17 ⁄4 5 38 ⁄4 36 ⁄4 10 ⁄4 27 ⁄8 4 ⁄16 18 ⁄4 2 23168 NO68 P68 SDAF3168 A8977 ER847 ER846 2450
13 1 1 1 3 1 7
SDAF23172 16 13 ⁄16 14 ⁄2 46 17 ⁄8 5 ⁄4 40 ⁄4 39 ⁄4 11 28 ⁄8 5 18 2 23172 NO72 P72 SDAF3172 A8974 ER809 ER874 2500
5 1 1 1 3 1 7 5
SDAF23176 17 14 ⁄8 14 ⁄2 46 17 ⁄8 5 ⁄4 40 ⁄4 39 ⁄4 11 28 ⁄8 4 ⁄8 18 2 23176 NO76 P76 SDAF3176 A8978 ER811 ER946 2500
1 3 1 3 3 1 1 3 1 1 1 3 1
SDAF23180 17 ⁄2 15 ⁄8 15 ⁄2 48 ⁄4 18 ⁄4 5 ⁄2 43 ⁄2 41 ⁄4 12 ⁄4 30 ⁄2 5 ⁄8 19 ⁄4 2 ⁄4 23180 NO80 P80 SDAF3180 A8979 ER948 ER771 2800
1 3 1 1 3 1 3 1 1
SDAF23184 18 ⁄2 16 ⁄16 17 52 21 5 ⁄2 46 ⁄8 44 ⁄8 14 ⁄2 33 ⁄4 6 22 ⁄4 2 ⁄4 23184 NO84 P84 SDAF3184 A8984 ER949 ER914 4300
1 1 1 3 1 3 9 1 1
SDAF23188 19 ⁄2 17 17 52 21 5 ⁄2 46 ⁄8 44 ⁄8 14 ⁄2 33 ⁄4 5 ⁄16 22 ⁄4 2 ⁄4 23188 NO88 P88 SDAF3188 A8976 ER950 ER811 4300
3 1 5 3 7 1 3 3 1
SDAF23192 20 17 ⁄4 18 54 ⁄4 21 ⁄8 5 ⁄4 48 ⁄8 47 ⁄8 15 35 ⁄4 6 22 ⁄4 2 ⁄2 23192 NO92 P92 SDAF3192 A8990 ER808 ER953 5000
(1) (3)
See opposite page for recommended shaft diameter S-2, S-3 tolerances. Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting.
(2)
“Housing Only” includes: cap, base, cap bolts, triple ring seals and stabilizing rings as required. Note: Limiting speeds are found in dimension tables in the spherical roller bearing section.
For threading information, see Adapter Accessories pages.
inch inch inch inch inch inch inch inch inch inch inch inch inch
1 3 1 1 3 1 3 7 9 1 5
SDAF23248 10 ⁄2 9 ⁄16 10 ⁄4 35 13 ⁄8 3 ⁄4 30 ⁄2 29 8 ⁄4 20 ⁄8 3 ⁄16 14 ⁄4 1 ⁄8 23248 NO48 P48 SDAF3248 A5679 ER840 ER945 1100
1 15 1 3 3 1 3 7 3 7 5
SDAF23252 11 ⁄2 9 ⁄16 12 38 ⁄4 14 ⁄4 3 ⁄8 33 ⁄2 32 ⁄4 9 23 ⁄16 4 ⁄4 15 ⁄8 1 ⁄8 23252 NO52 P52 SDAF3252 A8968 ER832 ER845 1350
1 3 1 3 3 1 3 7 3 7 5
SDAF23256 12 ⁄2 10 ⁄4 12 38 ⁄4 14 ⁄4 3 ⁄8 33 ⁄2 32 ⁄4 9 23 ⁄16 4 ⁄8 15 ⁄8 1 ⁄8 23256 NO56 P56 SDAF3256 A8975 ER866 ER826 1400
1 13 3 3 1 1 1 3 1 3 7
SDAF23260 13 11 ⁄2 12 ⁄16 41 ⁄4 15 ⁄4 4 ⁄2 36 ⁄2 35 10 ⁄2 25 ⁄4 4 ⁄2 16 ⁄4 1 ⁄8 23260 NO60 P60 SDAF3260 A8970 ER846 ER856 1900
5 3 3 1 3 3 7 1 3
SDAF23264 14 12 ⁄16 14 43 ⁄4 17 ⁄4 5 38 ⁄4 36 ⁄4 10 ⁄4 27 ⁄8 5 ⁄8 18 ⁄4 2 23264 NO64 P64 SDAF3264 A8977 ER876 ER943 2500
1 1 1 1 3 1 7
SDAF23268 15 13 ⁄16 14 ⁄2 46 17 ⁄8 5 ⁄4 40 ⁄4 39 ⁄4 11 28 ⁄8 5 18 2 23268 NO68 P68 SDAF3268 A8978 ER847 ER846 2650
13 1 3 3 1 1 3 1 1 1 3 1
SDAF23272 16 13 ⁄16 15 ⁄2 48 ⁄4 18 ⁄4 5 ⁄2 43 ⁄2 41 ⁄4 12 ⁄4 30 ⁄2 5 ⁄2 19 ⁄4 2 ⁄4 23272 NO72 P72 SDAF3272 A8979 ER809 ER874 2950
5 1 3 3 1 1 3 1 1 3 3 1
SDAF23276 17 14 ⁄8 15 ⁄2 48 ⁄4 18 ⁄4 5 ⁄2 43 ⁄2 41 ⁄4 12 ⁄4 30 ⁄2 4 ⁄8 19 ⁄4 2 ⁄4 23276 NO76 P76 SDAF3276 A8980 ER811 ER946 3050
1 3 1 1 3 1 3 1 1
SDAF23280 17 ⁄2 15 ⁄8 17 52 21 5 ⁄2 46 ⁄8 44 ⁄8 14 ⁄2 33 ⁄4 6 22 ⁄4 2 ⁄4 23280 NO80 P80 SDAF3280 A8976 ER948 ER771 4500
1 3 1 5 3 7 1 3 3 3 1
SDAF23284 18 ⁄2 16 ⁄16 18 54 ⁄2 21 ⁄8 5 ⁄4 48 ⁄8 47 ⁄8 15 35 ⁄4 6 ⁄8 22 ⁄4 2 ⁄2 23284 NO84 P84 SDAF3284 A8990 ER955 ER951 5000
1 1 5 3 7 1 3 7 3 1
SDAF23288 19 ⁄2 17 18 54 ⁄2 21 ⁄8 5 ⁄4 48 ⁄8 47 ⁄8 15 35 ⁄4 5 ⁄8 22 ⁄4 2 ⁄2 23288 NO88 P88 SDAF3288 A8988 ER956 ER838 5050
(1) (3)
See opposite page for recommended shaft diameter S-2, S-3 tolerances. Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting.
(2)
“Housing Only” includes: cap, base, cap bolts, triple ring seals and stabilizing rings as required. Note: Limiting speeds are found in dimension tables in the spherical roller bearing section.
304
Shaft Diameters
2.9375
2.8710
2.9335
9
9 ⁄16
15
9 ⁄16
9.5625
9.9375
9.5565
9.9315
2
3 3.0000 2.9960 10 10.0000 9.9940
1 7
3 ⁄16 3.0625 3.0585 10 ⁄16 10.4375 10.4305
3 1
3 ⁄16 3.1875 3.1835 10 ⁄2 10.5000 10.4930
1 15
3 ⁄4 3.2500 3.2460 10 ⁄16 10.9375 10.9305
3
3 ⁄8 3.3750 3.3710 11 11.0000 10.9930
7 7
3 ⁄16 3.4375 3.4335 11 ⁄16 11.4375 11.4305
5 1
3 ⁄8 3.6250 3.6210 11 ⁄2 11.5000 11.4930
15 15
3 ⁄16 3.9375 3.9335 11 ⁄16 11.9375 11.9305
1
4 ⁄8 4.1250 4.1200 12 12.0000 11.9930
3 7
4 ⁄16 4.1875 4.1825 12 ⁄16 12.4375 12.4295
7 1
4 ⁄16 4.4375 4.4325 12 ⁄2 12.5000 12.4920
1 15
4 ⁄2 4.5000 4.4950 12 ⁄16 12.9375 12.9295
9
4 ⁄16 4.5625 4.5575 13 13.0000 12.9920
7 7
4 ⁄8 4.8750 4.8700 13 ⁄16 13.4375 13.4295
15 1
4 ⁄16 4.9375 4.9325 13 ⁄2 13.5000 13.4920
3 15
5 ⁄16 5.1875 5.1825 13 ⁄16 13.9375 13.9295
5
5 ⁄16 5.3125 5.3075 14 14.0000 13.9920
7
5 ⁄16 5.4375 5.4325 15 15.0000 14.9920
3
5 ⁄4 5.7500 5.7450 16 16.0000 15.9920
7
5 ⁄8 5.8750 5.8700 17 17.0000 16.9920
15 1
5 ⁄16 5.9375 5.9325 17 ⁄2 17.5000 17.4920
1 1
6 ⁄16 6.0625 6.0575 18 ⁄2 18.5000 18.4920
1 1
6 ⁄4 6.2500 6.2450 19 ⁄2 19.5000 19.4920
7
6 ⁄16 6.4375 6.4325 20 20.0000 19.9920
5
6 ⁄8 6.6250 6.6200
7
6 ⁄8 6.8750 6.8700
15
6 ⁄16 6.9375 6.9325
7 7.0000 6.9950
3
7 ⁄16 7.1875 7.1825
Triple lip seals for other shaft diameters are available upon special order.
305
TU Take-Up Units
The same care exercised in the selection of stationary pillow blocks are steel. TU take-up units are available with travel lengths from 12
must be applied to selecting the proper take-up unit. Load requirements to 36 inches, in 6-inch increments.
should be carefully evaluated before specifying a particular Torrington Catalog numbers shown here are for the TU take-up unit only;
take-up assembly. pillow block assemblies must be ordered separately. Both two -and
The pedestal of Torrington TU units is made of stress-relieved cast four-bolt pedestals are available and must be specified.
iron and the end bases are ductile iron, and the guide rail and screw
C + TRAVEL E
DIMENSIONS
TU Take-Up Pillow Block A C E F G H K
Unit Housing Number Bolt
Catalog (SAF or SDAF) Size
Number
306
FIXED
END
N SCREW
SIZE H L
S-1
FLOAT
A END
SHOWN WITH
END ENCLOSURE
D PLATE
F
E C
B T
A
SECTION A-A
DIMENSIONS
2
(1) (3) (2)
Take-Up Unit Shaft A B C D E F G H L N R T Bearing Adapter Stabilizing Triple Aprx.
and Frame Diam. Bolt Number Assembly Ring Seal Wt.
Number S-1 Size Number 1 Req’d 2 Req’d
travel in boldface
inch inch inch inch inch inch inch inch inch inch inch inch inch lbs.
15 5 1 1 3 1 5 3 1
TTU-55-12 1 ⁄16 4 ⁄8 28 ⁄2 3 ⁄2 1 ⁄4 26 ⁄2 - ⁄8 9 4 ⁄4 7 ⁄4 4 22211K SNW-11 SR-11-0 LER24 55
5 1 1 3 1 5 3 1
TTU-55-18 4 ⁄8 34 ⁄2 3 ⁄2 1 ⁄4 32 ⁄2 - ⁄8 9 4 ⁄4 7 ⁄4 4 22211K SNW-11 SR-11-0 LER24 60
5 1 1 3 1 5 3 1
TTU-55-24 4 ⁄8 40 ⁄2 3 ⁄2 1 ⁄4 38 ⁄2 - ⁄8 9 4 ⁄4 7 ⁄4 4 22211K SNW-11 SR-11-0 LER24 65
3 1 1 3 1 5 1 3 3
TTU-65-12 2 ⁄16 5 29 ⁄2 3 ⁄2 1 ⁄4 27 ⁄2 - ⁄8 10 4 ⁄2 ⁄4 7 ⁄4 4 22213K SNW-13 SR-13-0 LER29 60
1 1 3 1 5 1 3 3
TTU-65-18 5 35 ⁄2 3 ⁄2 1 ⁄4 33 ⁄2 - ⁄8 10 4 ⁄2 ⁄4 7 ⁄4 4 22213K SNW-13 SR-13-0 LER29 65
1 1 3 1 5 1 3 3
TTU-65-24 5 41 ⁄2 3 ⁄2 1 ⁄4 39 ⁄2 - ⁄8 10 4 ⁄2 ⁄4 7 ⁄4 4 22213K SNW-13 SR-13-0 LER29 70
7 3 1 1 3 1 3 1 1 7 1
TTU-75-6 2 ⁄16 5 ⁄16 24 ⁄2 3 ⁄2 1 ⁄4 22 ⁄2 - ⁄4 10 ⁄2 4 ⁄2 ⁄8 8 ⁄4 4 22215K SNW-15 SR-15-0 LER37 65
3 1 1 3 1 3 1 1 7 1
TTU-75-12 5 ⁄16 30 ⁄2 3 ⁄2 1 ⁄4 28 ⁄2 - ⁄4 10 ⁄2 4 ⁄2 ⁄8 8 ⁄4 4 22215K SNW-15 SR-15-0 LER37 70
3 1 1 3 1 3 1 1 7 1
TTU-75-18 5 ⁄16 36 ⁄2 3 ⁄2 1 ⁄4 34 ⁄2 - ⁄4 10 ⁄2 4 ⁄2 ⁄8 8 ⁄4 4 22215K SNW-15 SR-15-0 LER37 75
3 1 1 3 1 3 1 1 7 1
TTU-75-24 5 ⁄16 42 ⁄2 3 ⁄2 1 ⁄4 40 ⁄2 - ⁄4 10 ⁄2 4 ⁄2 ⁄8 8 ⁄4 4 22215K SNW-15 SR-15-0 LER37 80
3 1 1 3 1 3 1 1 7 1
TTU-75-30 5 ⁄16 48 ⁄2 3 ⁄2 1 ⁄4 46 ⁄2 - ⁄4 10 ⁄2 4 ⁄2 ⁄8 8 ⁄4 4 22215K SNW-15 SR-15-0 LER37 85
15 1 5 1 5 1 3 1
TTU-85-6 2 ⁄16 6 26 ⁄2 4 ⁄8 2 24 ⁄2 2 ⁄8 12 ⁄4 4 ⁄4 1 9 ⁄4 5 22217K SNW-17 SR-17-14 LER53 95
1 5 1 5 1 3 1
TTU-85-12 6 32 ⁄2 4 ⁄8 2 30 ⁄2 2 ⁄8 12 ⁄4 4 ⁄4 1 9 ⁄4 5 22217K SNW-17 SR-17-14 LER53 100
1 5 1 5 1 3 1
TTU-85-18 6 38 ⁄2 4 ⁄8 2 36 ⁄2 2 ⁄8 12 ⁄4 4 ⁄4 1 9 ⁄4 5 22217K SNW-17 SR-17-14 LER53 105
1 5 1 5 1 3 1
TTU-85-24 6 44 ⁄2 4 ⁄8 2 42 ⁄2 2 ⁄8 12 ⁄4 4 ⁄4 1 9 ⁄4 5 22217K SNW-17 SR-17-14 LER53 110
1 5 1 5 1 3 1
TTU-85-30 6 50 ⁄2 4 ⁄8 2 48 ⁄2 2 ⁄8 12 ⁄4 4 ⁄4 1 9 ⁄4 5 22217K SNW-17 SR-17-14 LER53 115
7 5 1 5 3 7 1 1
TTU-100-12 3 ⁄16 6 ⁄8 34 ⁄4 4 ⁄8 2 32 2 ⁄4 13 ⁄8 6 1 ⁄8 10 5 ⁄2 22220K SNW-20 SR-20-17 LER102 140
5 1 5 3 7 1 1
TTU-100-18 6 ⁄8 40 ⁄4 4 ⁄8 2 38 2 ⁄4 13 ⁄8 6 1 ⁄8 10 5 ⁄2 22220K SNW-20 SR-20-17 LER102 145
5 1 5 3 7 1 1
TTU-100-24 6 ⁄8 46 ⁄4 4 ⁄8 2 44 2 ⁄4 13 ⁄8 6 1 ⁄8 10 5 ⁄2 22220K SNW-20 SR-20-17 LER102 150
5 1 5 3 7 1 1
TTU-100-30 6 ⁄8 52 ⁄4 4 ⁄8 2 50 2 ⁄4 13 ⁄8 6 1 ⁄8 10 5 ⁄2 22220K SNW-20 SR-20-17 LER102 155
15 3 1 5 1 1 3 1 1 1
TTU-110-12 3 ⁄16 7 ⁄4 38 ⁄2 5 ⁄8 2 ⁄4 36 2 ⁄2 ⁄4 16 ⁄4 6 ⁄2 1 ⁄4 12 7 22222K SNW-22 SR-22-19 LER109 200
3 1 5 1 1 3 1 1 1
TTU-110-18 7 ⁄4 44 ⁄2 5 ⁄8 2 ⁄4 42 2 ⁄2 ⁄4 16 ⁄4 6 ⁄2 1 ⁄4 12 7 22222K SNW-22 SR-22-19 LER109 210
3 1 5 1 1 3 1 1 1
TTU-110-24 7 ⁄4 50 ⁄2 5 ⁄8 2 ⁄4 48 2 ⁄2 ⁄4 16 ⁄4 6 ⁄2 1 ⁄4 12 7 22222K SNW-22 SR-22-19 LER109 220
3 1 5 1 1 3 1 1 1
TTU-110-30 7 ⁄4 56 ⁄2 5 ⁄8 2 ⁄4 54 2 ⁄2 ⁄4 16 ⁄4 6 ⁄2 1 ⁄4 12 7 22222K SNW-22 SR-22-19 LER109 230
3 1 5 1 1 3 1 1 1
TTU-110-36 7 ⁄4 62 ⁄2 5 ⁄8 2 ⁄4 60 2 ⁄2 ⁄4 16 ⁄4 6 ⁄2 1 ⁄4 12 7 22222K SNW-22 SR-22-19 LER109 240
7 5 3 3 3 3 1 7 1 3
TTU-130-12 4 ⁄16 8 ⁄8 45 ⁄4 8 ⁄4 2 ⁄4 40 ⁄4 5 1 ⁄8 18 ⁄8 7 ⁄4 2 14 ⁄8 10 22226K SNW-26 SR-26-0 LER117 360
5 3 3 3 3 1 7 1 3
TTU-130-18 8 ⁄8 51 ⁄4 8 ⁄4 2 ⁄4 46 ⁄4 5 1 ⁄8 18 ⁄8 7 ⁄4 2 14 ⁄8 10 22226K SNW-26 SR-26-0 LER117 380
5 3 3 3 3 1 7 1 3
TTU-130-24 8 ⁄8 57 ⁄4 8 ⁄4 2 ⁄4 52 ⁄4 5 1 ⁄8 18 ⁄8 7 ⁄4 2 14 ⁄8 10 22226K SNW-26 SR-26-0 LER117 400
5 3 3 3 3 1 7 1 3
TTU-130-30 8 ⁄8 63 ⁄4 8 ⁄4 2 ⁄4 58 ⁄4 5 1 ⁄8 18 ⁄8 7 ⁄4 2 14 ⁄8 10 22226K SNW-26 SR-26-0 LER117 420
15 1 1 3 1 1 1 3 1 1 1
TTU-140-12 4 ⁄16 9 ⁄2 49 ⁄2 9 ⁄4 3 44 ⁄2 5 ⁄2 1 ⁄4 20 ⁄8 7 ⁄2 2 ⁄4 16 ⁄4 11 22228K SNW-28 SR-28-0 LER122 460
1 1 3 1 1 1 3 1 1 1
TTU-140-18 9 ⁄2 55 ⁄2 9 ⁄4 3 50 ⁄2 5 ⁄2 1 ⁄4 20 ⁄8 7 ⁄2 2 ⁄4 16 ⁄4 11 22228K SNW-28 SR-28-0 LER122 480
1 1 3 1 1 1 3 1 1 1
TTU-140-24 9 ⁄2 61 ⁄2 9 ⁄4 3 56 ⁄2 5 ⁄2 1 ⁄4 20 ⁄8 7 ⁄2 2 ⁄4 16 ⁄4 11 22228K SNW-28 SR-28-0 LER122 510
1 1 3 1 1 1 3 1 1 1
TTU-140-30 9 ⁄2 67 ⁄2 9 ⁄4 3 62 ⁄2 5 ⁄2 1 ⁄4 20 ⁄8 7 ⁄2 2 ⁄4 16 ⁄4 11 22228K SNW-28 SR-28-0 LER122 530
(1) (3)
See page 305 for recommended shaft diameter S-1 tolerances. Includes sleeve, locknut and lockwasher. Add shaft size to order.
(2)
Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting. Note: Limiting speeds are found in dimension tables in the spherical roller bearing section.
307
DUSTAC™ Shaft Seal force. Because of this special design, no special finish is required on
the shaft.
The DUSTAC™ shaft seal installs easily and quickly. No
For extremely contaminated environments, such as might be encoun- modification to the standard housing is required.
tered by pillow blocks located in taconite mines, the exclusive
Torrington DUSTAC™ shaft seal is recommended. ORDER INSTRUCTIONS
A DUSTAC™ shaft seal shuts out residual and air-borne contami- Torrington DUSTAC™ shaft seal may be ordered in place of the
nants even better than the triple labyrinth shaft seal. It contributes standard LER triple ring seals supplied with the pillow blocks listed.
significantly to extending bearing life, and reduces cost by preventing They are also available to retrofit existing installations.
premature bearing failure. To order pillow block housings with DUSTAC™ shaft seal on both
DUSTAC™ shaft seal is a patented device utilizing a V-shaped sides, add the suffix “DV” to the number (i.e.,SAF22522DV).
nitrile ring which rotates with the shaft and applies pressure to the To order pillow block housings with DUSTAC™ shaft seal and one
cartridge face to exclude contaminants. Because of this unique design, end closed, add the suffix “DC” to the number (i.e.,SAF22522DC).
no special finish is required on the shaft. The geometry of the Standard sizes of DUSTAC™ shaft seals are shown in the table
DUSTAC™ shaft seal also enhances the excluding effect of centrifugal below. Other sizes are available on request.
7. Lower shaft, bearing and seals into the housing base taking
care to guide the seals into the seal grooves. S-1
8. On each shaft there must be only one fixed bearing. If this
bearing is to be fixed, the stabilizing ring can be inserted
between the bearing outer ring and the housing shoulder on
the locknut side of the bearing. All other bearings on this shaft
should be centered in the housing. V-RING FACE SEAL
Mounted on shaft and rotates with
the shaft. Particles are deflected
9. The upper half of the housing or cap should be thoroughly from the sealing point due to the
rotation of the V-Ring Face Seal.
cleaned and checked for burrs. Place it over the bearing and
seals. The dowel pins will align the cap to the base. NOTE:
Housing caps and bases are not interchangeable. B
308
SRLS SERIES
Also split face labyrinth seals, SRLS, are available for easier installation
and removal when space is restricted. This seal is made of two halves
reamed and bolted together. An O-ring is incorporated in the seal bore
for additional contamination protection and also to prevent axial
displacement of the seal on its shaft when used in vibration applications.
Types RLS and SRLS are available for types SAF, SDAF and
T pillow blocks and take-up units. Pillow blocks or take-up units may be
obtained with one or two face labyrinth seals.
2
Taconite Seals
FTV SERIES
Flinger Taconite Seal With V-Ring
The FTV Taconite Seal combines the qualities of the face labyrinth seal
and the DUSTAC™ Seal to improve the efficiency of sealing for
extremely contaminated environments.
The rotating flinger added to the basic design, incorporated face
labyrinth grooves and compressing O-ring in the bore, protecting against
incursion of foreign matters and ensuring a regular pressure of the V-ring
to the cartridge face.
FTL SERIES
Flinger Taconite Seal With Lip Seal
The FTL Seal has the same property as above but the V-ring is
substituted to a Lip Seal working directly on the Flinger Lip to prevent the
shaft of any grooving.
The FTV and FTL Taconite Seal can be substituted in either ER or
LER ring SAF pillow block series and do not require modifications to the
standard housings. FTL FTV
309
3 4 1 4 5
Sine Bar Gages
Tapered bore, anti-friction bearings are mounted either on
2
adapter sleeves or on tapered shaft seats. In cases where
tapered bore bearings are mounted directly on the shaft,
the shaft must conform to the tapered bore of the bearing
to assure proper fit. If proper fit is not achieved, the results
might be:
1. Turning of the bearing inner race on the shaft.
1 Saddle
2. Uneven loading of the bearing. 2 Sine Bar
3. Severe inner race hoop stress. 3 Web Clamp
4 Locking Screws
4. Insufficient support (back-up) of the inner race on the 5 Micrometer ( not included )
shaft.
All of these conditions might lead to premature bearing on the use of sine bars, contact your Timken sales engineer,
failure. Therefore, the manufacture, maintenance, and or the Timken Engineering Department.
measurement of accurate shaft tapers is important. There A complete set for measurement of 1:12 shaft tapers con-
are two generally accepted ways of measuring tapered sists of 3", 4", 51/2", 7", 10" and 14" long sine bar gages, sine
shafts: ring gages and sine bar gages. Precision measure- bar saddle no. T-5491-C, web clamp no. T-5489-A and a
ment of tapered shafts is difficult with ring gages and may wooden box no. T-5224-C. A complete set for 1:30 shaft
be impossible in the case of large shafts where gages are tapers consists of 4", 6", 8", and 12" long sine bar gages.
large, cumbersome and heavy. Sine bars can be purchased individually, or in any combi-
Torrington sine bar gages provide an accurate and easy nation of sizes to meet your individual needs. All sine bars
method of measurement. Because Torrington sine bar require a sine bar saddle and web clamp. A Wooden box
gages are light weight and easy to handle, minimal skill is optional.
and practice are required to achieve precise gaging of the For prices and delivery contact your local authorized
shaft size and taper. For information and engineering data Timken distributor.
Part Number size inch for bearings Part Number size inch for bearings
T-3071-C 3.0000 22232K to 22240K T-3074-C 7.0000 230/530K to 230/750K
T-3071-C 3.0000 22322K to 22328K T-3074-C 7.0000 23168K to 23196K
T-3071-C 3.0000 23040K to 23048K T-3074-C 7.0000 23260K to 23276K
T-3071-C 3.0000 23130K to 23136K 239/750K to 239/1120K
T-3071-C 3.0000 23226K to 23230K
T-3075-C 10.0000 230/800K to 230/1180
23960K to 23972K
T-3075-C 10.0000 231/500K to 231/710K
T-3072-C 4.0000 22248K to 22256K T-3075-C 10.0000 23280K to 232/530K
T-3072-C 4.0000 22330K to 22340K 230/1250 and up
T-3072-C 4.0000 23052K to 23076K
T-3076-C 14.0000 231/750K and up
T-3072-C 4.0000 23138K to 23148K
T-3076-C 14.0000 232/560K and up
T-3072-C 4.0000 23232K to 23240K
239/118K and up
23976K to 239/560K
T-5476-C 4.0000 24040K to 24056K
T-3073-C 5.5000 22260K to 22264K
T-3073-C 5.5000 22344K to 22356K T-5476-C 4.0000 24132K to 24144K
T-3073-C 5.5000 23080K to 230/500K T-5477-C 6.0000 24060K to 24084K
T-3073-C 5.5000 23152K to 23164K T-5477-C 6.0000 24148K to 24160K
T-3073-C 5.5000 23244K to 23256K
T-5478-C 8.0000 24089K to 240/630K
239/600K to 239/710K
T-5478-C 8.0000 24164K to 24192K
Note: All Sine Bars require a sine bar saddle, T-5491-C and a web clamp T-5489-A T-5479-C 12.0000 240/670K and up
T-5479-C 12.0000 24196K and up
310
Hydraulic Nuts
Introduction
Torrington hydraulic nuts have been designed to install and
remove tapered bore bearings with minimal effort. The use
of hydraulic nuts allows for better control of the bearing
internal clearance reduction without damaging the bearing
or other components. Also, the hydraulic nut will consider-
ably reduce the downtime during installation or removal of
tapered bore bearings.
Description
The Torrington hydraulic nut consists of a female threaded • Pipe plug 1⁄4" B.S.P:
ring and a male ring with two o-ring seals. Use the hydraulic nut part number plus the number 647
All hydraulic nuts are supplied with: Example: HMVC 40/647
• Quick connection fittings (male 1⁄4" B.S.P. and female 3⁄8" • Quick Connection Fittings (male 1⁄4" B.S.P. and female
N.P.T.) 3
⁄8" N.P.T.):
• Two pipe plugs 1⁄4" B.S.P. Use the hydraulic nut part number plus the number 849.
• One set of spare o-rings. Example: HMVC 40/849
Ordering Components
To order spare components for the hydraulic nuts, please Hydraulic nut used to
order part numbers as listed below: withdraw a push type
• O-ring Seal Kits: adapter sleeve.
Use the hydraulic nut part number plus the number 132.
Example: HMVC 40/132
311
Series: Radial
Modifications:
2 digits indicates metric Internal
(First 2 letters are assigned by Timken engineers) letter
envelope dimensions Clearance:
other than “O” in first position indicates modification to
3 digits indicates inch R1 < R2
inner ring.
envelope dimensions R2 < R3
Letter other than “O” in second position indicates
R3 = Standard
modification to outer ring.
R4 > R3
R5 > R4
Common Modifications:
101 outer ring with special lubrication hole size
107 outer ring with standard lubrication holes and
machined lubrication groove in center of o.d.
127 steel cage
132 wide inner ring
229 rings and rollers made of carburized grade steel
305 inner ring with oversize bore outer ring with
standard lubrication holes and machined
lubrication groove in center of o.d.
334 centrifically cast bronze cage
771 mark bearings serially
NJ 2 04 E.TVP
Series Suffix
10 = width series 1; diameter series 0 (dimension series 10) E.TVP = “E” design bearing, molded
2= width series 0; diameter series 2 (dimension series 02) reinforced polymer
22 = width series 2; diameter series 2 (dimension series 22) window-type cage
3= width series 0; diameter series 3 (dimension series 03) M = machined brass cage
23 = width series 2; diameter series 3 (dimension series 23)
312
Radial
Cylindrical
Roller Bearings
Page Page
METRIC SERIES (SMALL BORE) STANDARD STYLES, DIMENSIONS – LOAD RATINGS
Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314 Bearing Types . . . . . . . . . . . . . . . . . . . . . . . . 322 - 324
Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 314 Bore Size 3.9370 - 5.1181in. (100 - 130mm) . . . . . . . . 325
Dimensional Accuracy . . . . . . . . . . . . . . . . . . . . . . 315
Bore Size 5.2500 - 5.9055in. (133 - 150mm) . . . . . . . . 326
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315
Bore Size 5.9055 - 6.6929in. (150 - 170mm) . . . . . . . . 327
Load Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 317
Tables of Dimensions . . . . . . . . . . . . . . . . . . . . . . . 319 Bore Size 6.6929 - 7.8740in. (170 - 200mm) . . . . . . . . 328 2
Bore Size 7.8740 - 9.0551in. (200 - 230mm) . . . . . . . . 329
Bore Size 9.0551 - 10.2362in. (230 - 260mm) . . . . . . . 330
Bore Size 10.2362 - 12.5in. (260 - 317.5mm) . . . . . . . 331
Bore Size 12.500 - 16.000in. (317.5 - 406.4mm) . . . . . 332
Bore Size 16.000 - 27.5in. (406.4 - 698.5mm) . . . . . . . 333
5200, A5200 Metric Series . . . . . . . . . . . . . . . . 334 - 335
5200, A5200 Metric Series Shaft and
Housings Fits and Tolerances . . . . . . . . . . . . . 336 - 337
313
NU NUP NJ
SUFFIXES
E.TVP E-design bearing, molded window type cage of engineered polymer.
M Machined brass cages.
314
the shaft or housing fillets. For this reason the maximum fillet 0,3 0,3 1 1,2
radius ras max of the mating component must be no greater 0,6 0,6 1,6 2,1
than the minimum chamfer dimension of the corresponding 1 1 2,3 2,8
cylindrical roller bearing ring corner rs min. 1,1 1 3 3,5
1,5 1,5 3,5 4,5
The shoulder of the mating components must be such
that, even with the maximum permissible single chamfer 2 2 4,4 5,5
dimension of the corresponding bearing ring, there is an 2,1 2,1 5,1 6
adequate contact surface area. Table 1 lists the maximum 3 2,5 6,2 7
fillet radius ras max and the minimum shoulder height. At high 4 3 7,3 8,5
5 4 9 10
axial loads the ribs must be supported over half their height.
6 5 11,5 13
(H + E and F + J
2 2 ) Shaft tolerances for cylindrical roller bearings with inner rings
are given in Table 3 on page 467.
where from bearing tables:
F raceway diameter of the inner ring
E raceway diameter of the outer ring
J rib diameter of the inner ring
H rib diameter of the outer ring
315
D1 D2 D3 D1 D3
NU NUP NJ
Table 2 – Mounting dimensions for metric series single row cylindrical roller bearings
Bore Shaft Bearing series
reference Dia 10 2..E 3..E
number 22..E 23..E
D1 D2 D1 D2 D3 D1 D2 D3
mm max min max min min max min min
02 15 20 23 26
03 17 21 25 27 24 27 30
04 20 25 27 26 29 32 27 30 33
05 25 30 32 31 34 37 33 37 40
06 30 35 38 37 40 44 40 44 48
07 35 41 44 43 46 50 45 48 53
08 40 46 49 49 52 56 51 55 60
09 45 52 54 54 57 61 57 60 66
10 50 57 59 58 62 67 63 67 73
11 55 63 66 65 68 73 69 72 80
12 60 68 71 71 75 80 75 79 86
13 65 73 76 77 81 87 81 85 93
14 70 78 82 82 86 92 87 92 100
15 75 83 87 87 90 96 93 97 106
16 80 90 94 94 97 104 99 105 114
316
317
Operating speed n
0,07
10000
0,06
0,05
0,04
Faz 0,03
C
0,02
0,01
1000
700
500
400
300
200
Dimension
series
10
Bearing 100 2..E
bore 3..E, 22..E
d 23..E
mm 70
50
40
30
20
10
318
r1 r1 r r1 r1 r
s
b
H F d E D F d J D J d1 H d F J E D
B B B
NU NJ NJ with HJ NUP
17 17 40 12 22,1 35,1 0,6 0,3 32 5,5 3 24,7 NJ203E.TVP HJ203E 18,9 16 14 000 22 000 0,068 0,009
17 40 12 22,1 35,1 0,6 0,3 32 1,2 NU203E.TVP 18,9 16 14 000 22 000 0,068
17 40 12 22,1 35,1 0,6 0,3 32 24,7 NUP203E.TVP 18,9 16 14 000 22 000 0,068
17 40 16 22,1 35,1 0,6 0,3 32 6 3 24,7 NJ2203E.TVP HJ2203E 25,3 23,3 14 000 22 000 0,091 0,01
17 40 16 22,1 35,1 0,6 0,3 32 1 NU2203E.TVP 25,3 23,3 14 000 22 000 0,091
17 40 16 22,1 35,1 0,6 0,3 32 24,7 NUP2203E.TVP 25,3 23,3 14 000 22 000 0,091
17 47 14 24,2 40,2 1,1 0,6 36,8 6,5 4 27,6 NJ303E.TVP HJ303E 26,7 22,8 13 000 21 000 0,121 0,012
17 47 14 24,2 40,2 1,1 0,6 36,8 1,2 NU303E.TVP 26,7 22,8 13 000 21 000 0,121
17 47 14 24,2 40,2 1,1 0,6 36,8 27,6 NUP303E.TVP 26,7 22,8 13 000 21 000 0,121
20 20 47 14 26,5 41,5 1 0,6 38,4 5,5 3 29,9 NJ204E.TVP HJ204E 29 26,5 12 000 18 000 0,133 0,011
20 47 14 26,5 41,5 1 0,6 38,4 1 NU204E.TVP 29 26,5 12 000 18 000 0,133
20 47 14 26,5 41,5 1 0,6 38,4 29,9 NUP204E.TVP 29 26,5 12 000 18 000 0,133
20 47 18 26,5 41,5 1 0,6 38,4 6,5 3 29,9 NJ2204E.TVP HJ2204E 34,1 32,7 12 000 18 000 0,142 0,012
20 47 18 26,5 41,5 1 0,6 38,4 1,8 NU2204E.TVP 34,1 32,7 12 000 18 000 0,142
20 47 18 26,5 41,5 1 0,6 38,4 29,9 NUP2204E.TVP 34,1 32,7 12 000 18 000 0,142
20 52 15 27,5 45,5 1,1 0,6 41,8 6,5 4 31,4 NJ304E.TVP HJ304E 32,6 28 12 000 18 000 0,152 0,017
20 52 15 27,5 45,5 1,1 0,6 41,8 1,1 NU304E.TVP 32,6 28 12 000 18 000 0,152
20 52 15 27,5 45,5 1,1 0,6 41,8 31,4 NUP304E.TVP 32,6 28 12 000 18 000 0,152
20 52 21 27,5 45,5 1,1 0,6 41,8 7,5 4 31,4 NJ2304E.TVP HJ2304E 42,9 40 12 000 18 000 0,207 0,02
20 52 21 27,5 45,5 1,1 0,6 41,8 2 NU2304E.TVP 42,9 40 12 000 18 000 0,207
20 52 21 27,5 45,5 1,1 0,6 41,8 31,4 NUP2304E.TVP 42,9 40 12 000 18 000 0,207
25 25 47 12 30,5 41,5 0,6 0,3 38,9 2,4 NU1005M1 14,7 13,6 9 800 15 000 0,083
25 52 15 31,5 46,5 1 0,6 43,3 6 3 34,9 NJ205E.TVP HJ205E 31 29,8 9 800 15 000 0,14 0,014
25 52 15 31,5 46,5 1 0,6 43,3 1,3 NU205E.TVP 31 29,8 9 800 15 000 0,14
25 52 15 31,5 46,5 1 0,6 43,3 34,9 NUP205E.TVP 31 29,8 9 800 15 000 0,14
25 52 18 31,5 46,5 1 0,6 43,3 6,5 3 34,9 NJ2205E.TVP HJ2205E 36,5 36,7 9 800 15 000 0,16 0,014
25 52 18 31,5 46,5 1 0,6 43,3 1,7 NU2205E.TVP 36,5 36,7 9 800 15 000 0,16
25 52 18 31,5 46,5 1 0,6 43,3 34,9 NUP2205E.TVP 36,5 36,7 9 800 15 000 0,16
25 62 17 34 54 1,1 1,1 50,1 7 4 38,3 NJ305E.TVP HJ305E 42,8 38,9 9 400 14 000 0,243 0,025
25 62 17 34 54 1,1 1,1 50,1 1,5 NU305E.TVP 42,8 38,9 9 400 14 000 0,243
25 62 17 34 54 1,1 1,1 50,1 38,3 NUP305E.TVP 42,8 38,9 9 400 14 000 0,243
25 62 24 34 54 1,1 1,1 50,1 8 4 38,3 NJ2305E.TVP HJ2305E 58,1 57,6 9 400 14 000 0,348 0,026
25 62 24 34 54 1,1 1,1 50,1 1,9 NU2305E.TVP 58,1 57,6 9 400 14 000 0,348
25 62 24 34 54 1,1 1,1 50,1 38,3 NUP2305E.TVP 58,1 57,6 9 400 14 000 0,348
1) Max. axial displacement
319
r1 r1 r r1
b
H F d E D F d J D J d1
B B
NU NJ NJ with HJ
45 45 75 16 52,5 67,5 1 0,6 63,9 2,5 NU1009M 37,4 43,1 5 600 8 600 0,287
45 85 19 54,5 76,5 1,1 1,1 72,4 8,5 5 59,1 NJ209E.TVP HJ209E 68 73,5 5 600 8 600 0,445 0,055
45 85 19 54,5 76,5 1,1 1,1 72,4 1,9 NU209E.TVP 68 73,5 5 600 8 600 0,445
45 85 19 54,5 76,5 1,1 1,1 72,4 59,1 NUP209E.TVP 68 73,5 5 600 8 600 0,445
45 85 23 54,5 76,5 1,1 1,1 72,4 9 5 59,1 NJ2209E.TVP HJ2209E 77,7 87 5 600 8 600 0,53 0,055
45 85 23 54,5 76,5 1,1 1,1 72,4 2,3 NU2209E.TVP 77,7 87 5 600 8 600 0,53
45 85 23 54,5 76,5 1,1 1,1 72,4 59,1 NUP2209E.TVP 77,7 87 5 600 8 600 0,53
1) Max. axial displacement
320
r1 r
s
H d F J E D
NUP
50 50 80 16 57,5 72,5 1 0,6 68,9 2,1 NU1010M 33 37,3 5 000 7 800 0,315
50 90 20 59,5 81,5 1,1 1,1 77,4 9 5 64,1 NJ210E.TVP HJ210E 67,7 74,5 5 100 7 800 0,49 0,061
50 90 20 59,5 81,5 1,1 1,1 77,4 2,2 NU210E.TVP 67,7 74,5 5 100 7 800 0,49
50 90 20 59,5 81,5 1,1 1,1 77,4 64,1 NUP210E.TVP 67,7 74,5 5 100 7 800 0,49
50 90 23 59,5 81,5 1,1 1,1 77,4 9 5 64,1 NJ2210E.TVP HJ210E 81,2 94,1 5 100 7 800 0,575 0,061
50 90 23 59,5 81,5 1,1 1,1 77,4 2,2 NU2210E.TVP 81,2 94,1 5 100 7 800 0,575
50 90 23 59,5 81,5 1,1 1,1 77,4 64,1 NUP2210E.TVP 81,2 94,1 5 100 7 800 0,575
50 110 27 65 97 2 2 91,4 13 8 71,4 NJ310E.TVP HJ310E 114 119 4 800 7 400 1,14 0,151
50 110 27 65 97 2 2 91,4 3 NU310E.TVP 114 119 4 800 7 400 1,14
50 110 27 65 97 2 2 91,4 71,4 NUP310E.TVP 114 119 4 800 7 400 1,14
50 110 40 65 97 2 2 91,4 14,5 8 71,4 NJ2310E.TVP HJ2310E 166 192 4 800 7 400 1,74 0,155
50 110 40 65 97 2 2 91,4 4,2 NU2310E.TVP 166 192 4 800 7 400 1,74
50 110 40 65 97 2 2 91,4 71,4 NUP2310E.TVP 166 192 4 800 7 400 1,74
55 55 90 18 64,5 80,5 1,1 1 76,7 2,4 NU1011M 37,8 44 4 500 6 900 0,464
55 100 21 66 90 1,5 1,1 85,6 9,5 6 71 NJ211E.TVP HJ211E 87,2 100 4 500 7 000 0,665 0,087
55 100 21 66 90 1,5 1,1 85,6 1,7 NU211E.TVP 87,2 100 4 500 7 000 0,665
55 100 21 66 90 1,5 1,1 85,6 71 NUP211E.TVP 87,2 100 4 500 7 000 0,665
55 100 25 66 90 1,5 1,1 85,6 10 6 71 NJ2211E.TVP HJ2211E 102 123 4 500 7 000 0,78 0,088
55 100 25 66 90 1,5 1,1 85,6 2,2 NU2211E.TVP 102 123 4 500 7 000 0,78
55 100 25 66 90 1,5 1,1 85,6 71 NUP2211E.TVP 102 123 4 500 7 000 0,78
55 120 29 70,5 106,5 2 2 100,3 14 9 77,7 NJ311E.TVP HJ311E 142 149 4 400 6 800 1,47 0,195
55 120 29 70,5 106,5 2 2 100,3 3 NU311E.TVP 142 149 4 400 6 800 1,47
55 120 29 70,5 106,5 2 2 100,3 77,7 NUP311E.TVP 142 149 4 400 6 800 1,47
55 120 43 70,5 106,5 2 2 100,3 15,5 9 77,7 NJ2311E.TVP HJ2311E 205 239 4 400 6 800 2,23 0,2
55 120 43 70,5 106,5 2 2 100,3 4,3 NU2311E.TVP 205 239 4 400 6 800 2,23
55 120 43 70,5 106,5 2 2 100,3 77,7 NUP2311E.TVP 205 239 4 400 6 800 2,23
60 60 95 18 69,5 85,5 1,1 1 81,7 3,3 NU1012M 38,9 46,7 4 100 6 300 0,491
60 110 22 72 100 1,5 1,5 95,1 10 6 77,7 NJ212E.TVP HJ212E 98,6 109 4 200 6 500 0,825 0,108
60 110 22 72 100 1,5 1,5 95,1 1,6 NU212E.TVP 98,6 109 4 200 6 500 0,825
60 110 22 72 100 1,5 1,5 95,1 77,7 NUP212E.TVP 98,6 109 4 200 6 500 0,825
60 110 28 72 100 1,5 1,5 95,1 10 6 77,7 NJ2212E.TVP HJ212E 132 158 4 200 6 500 1,08 0,108
60 110 28 72 100 1,5 1,5 95,1 2,4 NU2212E.TVP 132 158 4 200 6 500 1,08
60 110 28 72 100 1,5 1,5 95,1 77,7 NUP2212E.TVP 132 158 4 200 6 500 1,08
65 65 100 18 74,5 90,5 1,1 1 86,7 3,3 NU1013M 40 49,4 3 800 5 900 0,523
65 120 23 78,5 108,5 1,5 1,5 103,2 10 6 84,6 NJ213E.TVP HJ213E 112 126 3 800 5 900 0,105 0,129
65 120 23 78,5 108,5 1,5 1,5 103,2 1,4 NU213E.TVP 112 126 3 800 5 900 0,105
65 120 23 78,5 108,5 1,5 1,5 103,2 84,6 NUP213E.TVP 112 126 3 800 5 900 0,105
65 120 31 78,5 108,5 1,5 1,5 103,2 10,5 6 84,6 NJ2213E.TVP HJ2213E 153 188 3 800 5 900 1,42 0,131
65 120 31 78,5 108,5 1,5 1,5 103,2 1,9 NU2213E.TVP 153 188 3 800 5 900 1,42
65 120 31 78,5 108,5 1,5 1,5 103,2 84,6 NUP2213E.TVP 153 188 3 800 5 900 1,42
For information on larger sizes of cylindrical roller radial bearings, see pages 317-327.
321
INTRODUCTION
Timken Torrington heavy-duty radial cylindrical roller bearings are inches are shown in this catalog, and even larger sizes can be
designed to provide the highest possible radial capacity for a given provided on special order. Consult a Timken sales engineer for
cross section, and to perform under heavy radial loads. complete information on your bearing size requirements.
These bearings incorporate improved internal proportions devel- The standard cylindrical roller bearing furnished by Torrington
oped through computer assisted optimization studies, to make consists of an outer ring, a complement of “Controlled Contour”
maximum use of the total available cross-sectional area. The rollers, a cage and an inner ring. Timken Torrington 5200 Series
Torrington “Controlled Contour” rollers redistribute end-stress concen- bearings include styles without an inner ring for applications where
tration and provide more uniform distribution of the applied load. the shaft functions as the inner ring. Bearing rings and rollers are
Cylindrical roller bearings with bore sizes from 100mm up to 27.5 manufactured from bearing-quality steel.
Bearing Types
STANDARD SIZES
Six standard styles of Timken Torrington cylindrical roller bearings application. Standard cage material is fully machined bronze with
are listed in this section of the catalog. All six styles have the same stamped steel also available.
roller complement for a given cross-section or envelope, and For convenience, all six styles of bearings are listed in the
therefore, the same radial load capacity. dimension tables in order of ascending bore size, with both inch and
In all six styles, one ring (either the inner or the outer) has two metric sizes indicated for each bearing . ABMA designations are
integral roller-guiding ribs. The other ring is separable from the used for these Timken Torrington bearings. Inch sized bearings are
assembly, and has either one integral rib or none. The two-rib ring identified by the letter “I” with the part number in bold type. RIU, for
locates the roller complement axially, and the ground diameter of the example, indicates an inch bearing, while RU indicates the equiva-
ribs may be used to support the cage. lent style in metric dimensions.
Moderate thrust loads from one direction only are acceptable for All types can be mounted with interference fits on either inner or
those styles with three integral ribs (RJ, RF, RT and RP). The outer ring (or both). In the latter case a bearing with increased
decision as to which ring should be double-ribbed is determined by internal clearance must be specified to provide proper running
conditions of assembly and mounting procedures in a specific clearance.
RIU, RU
These bearings carry radial load only and can accommodate
expansion or contraction. The relative axial displacement of one ring
to the other occurs with minimum friction while the bearing is rotating.
These bearings may be used in one or two positions for shaft support
if other means of axial location are provided. The outer ring has two
integral ribs while the inner ring has a cylindrical O.D. without ribs.
RIU, RU
RIN, RN
This series has the same characteristics as RIU, RU, bearings except
that two ribs are incorporated in the inner ring and the outer ring has
a cylindrical bore without ribs.
RIN, RN
322
RIJ, RJ
Types RIJ and RJ have double ribbed outer and single-ribbed inner
rings and can support heavy radial loads, as well as light unidirectional
thrust loads up to 10% of the radial load. The thrust load is transmitted
between the diagonally opposed rib faces in a sliding rather than a
rolling action. Thus, when limiting thrust conditions are approached,
lubrication can become critical.
Timken Engineering should be consulted for approval of such
applications. When thrust loads are very light, these bearings may be
used in an opposed mounting to locate the shaft. In such cases shaft
endplay should be adjusted at time of assembly.
RIJ, RJ
RIF, RF
This type has the same characteristics as RIJ and RJ except it
incorporates a double-ribbed inner ring and a single ribbed outer ring.
2
RIF, RF
RIT, RT
These types have a double-ribbed outer ring and a single ribbed inner
ring with an abutting loose rib which allows the bearing to provide axial
location and to carry light thrust loads in both directions. Factors
governing radial and thrust capacities are the same as for RIJ and RJ.
A type RIT or RT bearing may be used in conjunction with a type RN
or RU bearing for applications where axial shaft expansion is antici-
pated. In such cases the fixed bearing is usually placed nearest the
drive end of the shaft to minimize alignment variations in the drive. Shaft
endplay (or float) is determined by the axial clearance in the bearing.
RIT, RT
RIP, RP
These types have the same characteristics as RIT and RT except that
the inner ring is double-ribbed with a loose abutting rib.
RIP, RP
323
5200
This type carries radial load only and has a double-ribbed outer ring.
It has enhanced radial capacity due to internal design proportions.
The bearings are useful for installations where limited radial cross
section is available where the shaft serves as the inner ring.
5200 WS
A5200 WS
This type has the same characteristics as the 5200 except includes a
full width cylindrical O.D. inner ring.
A5200 WS
A5200 WM
This type has the same characteristics as the WS except with a
machined bronze cage.
A-52XX-WM
324
C
r
STANDARD STYLES
Six styles of radial cylindrical roller bearings are shown below. Each
style is identified by a special letter designation. The dimension and
load rating data applies to all six styles.
The inch series bearing numbers are presented in italicized type r
for convenient reference.
D
Life calculations, shaft and housing fits, tolerances and other d E
technical data for these bearings are found in the Engineering section of F
this catalog.
Check for availability.
100RU02 100RN02 100RJ02 100RF02 100RT02 100RP02 3.9370 7.0866 1.3386 4.5 6.5 0.08 8.5 55000 49000 2150
100 180 34 114 165 2 3.8 245.0 216.0
100RU03 100RN03 100RJ03 100RF03 100RT03 100RP03 3.9370 8.4646 1.8504 4.78 7.62 0.1 19.3 95000 86500 1900
3.9370
215
8.4646
47
3.2500
121
4.81
194
7.59
2.5
0.1
2.5
34.2
415.0
196000
380.0
150000 1900
2
100 215 82.6 122 193 2.5 15.5 865.0 670.0
40RIU130 40RIN130 40RIJ130 40RIF130 40RIT130 40RIP130 4.0000 5.6250 0.8750 4.31 5.31 0.1 2.4 30000 22000 2450
101.6 142.88 22.23 110 135 2.5 1.1 134.0 98.0
40RIU133 40RIN133 40RIJ133 40RIF133 40RIT133 40RIP133 4.0000 8.5000 1.7500 4.75 7.75 0.16 18.3 73500 72000 1890
101.6 215.9 44.45 121 197 4 8.3 325.0 320.0
105RU02 105RN02 105RJ02 105RF02 105RT02 105RP02 4.1339 7.4803 1.4173 4.75 6.88 0.08 10.2 57000 50000 2030
105 190 36 121 175 2 4.6 250.0 224.0
105RU32 105RN32 105RJ32 105RF32 105RT32 105RP32 4.1339 7.4803 2.5625 4.75 6.88 0.08 18.3 146000 108000 2030
105 190 65.1 121 175 2 8.3 655.0 480.0
105RU03 105RN03 105RJ03 105RF03 105RT03 105RP03 4.1339 8.8583 1.9291 5 8 0.1 22.2 100000 90000 1820
105 225 49 127 203 2.5 10.1 450.0 400.0
42RIU194 42RIN194 42RIJ194 42RIF194 42RIT194 42RIP194 4.2500 8.7500 2.7500 5 8 0.16 30.0 160000 129000 1820
107.95 222.25 69.85 127 203 4 13.6 720.0 570.0
110RU02 110RN02 110RJ02 110RF02 110RT02 110RP02 4.3307 7.874 1.4961 4.94 7.28 0.08 11.8 71000 62000 1930
110 200 38 125 185 2 5.4 315.0 275.0
110RU03 110RN03 110RJ03 110RF03 110RT03 110RP03 4.3307 9.4488 1.9685 5.31 8.47 0.1 25.8 170000 122000 1710
110 240 50 135 215 2.5 11.7 750.0 550.0
45RIU196 45RIN196 45RIJ196 45RIF196 45RIT196 45RIP196 4.5000 8.0000 1.3125 5.12 7.38 0.12 10.5 55000 50000 1890
114.3 203.2 33.34 130 187 3 4.8 245.0 224.0
120RU30 120RN30 120RJ30 120RF30 120RT30 120RP30 4.7244 7.0866 1.8110 5.12 6.69 0.08 9.3 88000 57000 2000
120 180 46 130 170 2 4.2 390.0 255.0
120RU02 120RN02 120RJ02 120RF02 120RT02 120RP02 4.7244 8.4646 1.5748 5.38 7.81 0.08 14.4 72000 64000 1790
120 215 40 137 198 2 6.5 320.0 285.0
120RU92 120RN92 120RJ92 120RF92 120RT92 120RP92 4.7244 8.4646 3.0000 5.38 7.81 0.08 27.3 196000 140000 1790
120 215 76.2 137 198 2 12.4 865.0 620.0
120RU03 120RN03 120RJ03 120RF03 120RT03 120RP03 4.7244 10.2362 2.1654 5.72 9.25 0.1 33.4 120000 112000 1580
120 260 55 145 235 2.5 15.2 540.0 490.0
130RU30 130RN30 130RJ30 130RF30 130RT30 130RP30 5.1181 7.874 2.0472 5.62 7.38 0.08 13.5 122000 80000 1820
130 200 52 143 187 2 6.1 540.0 355.0
130RU02 130RN02 130RJ02 130RF02 130RT02 130RP02 5.1181 9.0551 1.5748 5.84 8.34 0.10 16.3 80000 69500 1660
130 230 40 148 212 2.5 7.4 355.0 305.0
130RU92 130RN92 130RJ92 130RF92 130RT92 130RP92 5.1181 9.0551 3.1250 5.84 8.38 0.1 32.4 224000 153000 1660
130 230 79.4 148 213 2.5 14.7 980.0 680.0
130RU03 130RN03 130RJ03 130RF03 130RT03 130RP03 5.1181 11.0236 2.2835 6.22 9.94 0.12 40.8 134000 125000 1460
130 280 58 158 252 3 18.5 600.0 550.0
(1) (2)
Maximum shaft or housing fillet radius which bearing corners will clear. Limiting speed given for oil bath only; grease = oil.
2
Continued on the next page.
325
52RIU240 52RIN240 52RIJ240 52RIF240 52RIT240 52RIP240 5.2500 7.2500 1.0000 5.59 6.91 0.1 4.4 53000 36000 1890
133.35 184.15 25.4 142 175 2.5 2.0 232.0 160.0
53RIU241 53RIN241 53RIJ241 53RIF241 53RIT241 53RIP241 5.3750 7.5000 1.0000 5.84 7.16 0.1 4.9 54000 36500 1820
136.52 190.5 25.4 148 182 2.5 2.2 240.0 163.0
140RU30 140RN30 140RJ30 140RF30 140RT30 140RP30 5.5118 8.2677 2.0866 5.97 7.81 0.08 14.6 122000 80000 1710
140 210 53 152 198 2 6.6 540.0 355.0
140RU51 140RN51 140RJ51 140RF51 140RT51 140RP51 5.5118 8.6614 1.4173 6.09 8.09 0.08 11.6 68000 54000 1660
140 220 36 155 206 2 5.3 300.0 240.0
140RU91 140RN91 140RJ91 140RF91 140RT91 140RP91 5.5118 8.6614 2.5000 6.06 8.12 0.08 20.5 180000 116000 1660
140 220 63.5 154 206 2 9.3 800.0 520.0
140RU02 140RN02 140RJ02 140RF02 140RT02 140RP02 5.5118 9.8425 1.6535 6.25 9.09 0.1 20.2 104000 88000 1540
140 250 42 159 231 2.5 9.2 465.0 400.0
140RU92 140RN92 140RJ92 140RF92 140RT92 140RP92 5.5118 9.8425 3.2500 6.25 9.09 0.1 40.0 270000 186000 1540
140 250 82.6 159 231 2.5 18.2 1200.0 830.0
140RU03 140RN03 140RJ03 140RF03 140RT03 140RP03 5.5118 11.811 2.4409 6.62 10.69 0.12 50.2 150000 137000 1360
140 300 62 168 271 3 22.8 670.0 610.0
140RU93 140RN93 140RJ93 140RF93 140RT93 140RP93 5.5118 11.811 4.5000 6.62 10.69 0.12 92.5 400000 290000 1360
140 300 114.3 168 271 3 42.0 1760.0 1290.0
56RIU246 56RIN246 56RIJ246 56RIF246 56RIT246 56RIP246 5.6250 7.7500 1.0000 6.09 7.41 0.1 5.0 57000 37500 1750
142.88 196.85 25.4 155 188 2.5 2.3 2.50.0 166.0
150RU30 150RN30 150RJ30 150RF30 150RT30 150RP30 5.9055 8.8583 2.2047 6.44 8.31 0.08 17.7 146000 95000 1600
150 225 56 16.4 211 2 8.0 640.0 415.0
150RU51 150RN51 150RJ51 150RF51 150RT51 150RP51 5.9055 9.2520 1.4961 6.5 8.66 0.08 13.9 90000 69500 1560
150 235 38 165 220 2 6.3 400.0 310.0
150RU91 150RN91 150RJ91 150RF91 150RT91 150RP91 5.9055 9.2520 2.6250 6.5 8.66 0.08 24.5 204000 132000 1560
150 235 66.7 165 220 2 11.1 900.0 585.0
150RU02 150RN02 150RJ02 150RF02 150RT02 150RP02 5.9055 10.6299 1.7717 6.75 9.78 0.1 25.7 118000 100000 1430
150 270 45 171 248 2.5 11.7 520.0 440.0
150RU92 150RN92 150RJ92 150RF92 150RT92 150RP92 5.9055 10.6299 3.5000 6.69 9.84 0.1 50.9 315000 216000 1430
150 270 88.9 170 250 2.5 23.1 1400.0 950.0
150RU03 150RN03 150RJ03 150RF03 150RT03 150RP03 5.9055 12.5984 2.5591 7.16 11.34 0.12 60.1 183000 163000 1280
150 320 65 182 288 3 27.3 815.0 720.0
(1) (2)
Maximum shaft or housing fillet radius which bearing corners will clear. Limiting speed given for oil bath only; grease = oil.
2
326
STANDARD STYLES C
Six styles of radial cylindrical roller bearings are shown below. Each r
style is identified by a special letter designation. The dimension and load
rating data applies to all six styles.
The inch series bearing numbers are presented in italicized type for
convenient reference.
Life calculations, shaft and housing fits, tolerances and other
technical data for these bearings are found in the Engineering section of
this catalog. r
Check for availability. D
d E
F
60RIU248 60RIN248 60RIJ248 60RIF248 60RIT248 60RIP248 6.0000 10.5000 1.5625 6.81 9.69 0.16 21.4 100000 86500 1430
152.4 266.7 39.69 173 246 4 9.7 450.0 380.0
60RIU249 60RIN249 60RIJ249 60RIF249 60RIT249 60RIP249 6.0000 10.5000 2.4375 6.84 9.66 0.16 33.5 196000 146000 1430
152.4 266.7 61.91 174 245 4 15.2 865.0 640.0
60RIU250 60RIN250 60RIJ250 60RIF250 60RIT250 60RIP250 6.0000 12.0000 2.2500 7.16 10.84 0.2 45.6 166000 143000 1310
152.4 304.8 57.15 182 275 5 20.7 735.0 640.0
60RIU251 60RIN251 60RIJ251 60RIF251 60RIT251 60RIP251 6.0000 12.0000 3.5000 7.12 10.88 0.2 71.3 305000 228000 1310
152.4 304.8 88.9 181 276 5 32.3 1340.0 1020.0
160RU30 160RN30 160RJ30 160RF30 160RT30 160RP30 6.2992 9.4488 2.3622 6.88 8.88 0.08 21.7 170000 108000 1500
160 240 60 175 225 2 9.8 765.0 475.0
160RU51 160RN51 160RJ51 160RF51 160RT51 160RP51 6.2992 9.8425 1.5748 6.81 9.31 0.08 16.5 102000 78000 1460
160 250 40 173 237 2 7.5 455.0 345.0
160RU91 160RN91 160RJ91 160RF91 160RT91 160RP91 6.2992 9.8425 2.8750 6.81 9.34 0.08 30.3 240000 150000 1460
160 250 73 173 237 2 13.7 1060.0 670.0
160RU02 160RN02 160RJ02 160RF02 160RT02 160RP02 6.2992 11.4173 1.8898 7.19 10.5 0.1 31.8 150000 122000 1330
160 290 48 183 267 2.5 14.4 670.0 550.0
160RU92 160RN92 160RJ92 160RF92 160RT92 160RP92 6.2992 11.4173 3.8750 7.19 10.53 0.1 65.6 345000 236000 1330
160 290 98 183 267 2.5 29.8 1560.0 1060.0
160RU03 160RN03 160RJ03 160RF03 160RT03 160RP02 6.2992 13.3858 2.6772 7.62 12.06 0.12 71.0 204000 176000 1200
160 340 68 194 306 3 32.2 900.0 780.0
160RU93 160RN93 160RJ93 160RF93 160RT93 160RP93 6.2992 13.3858 5.2500 7.62 12.06 0.12 138.6 520000 375000 1200
160 340 133 194 306 3 62.8 2320.0 1660.0
170RU30 170RN30 170RJ30 170RF30 170RT30 170RP30 6.6929 10.2362 2.6378 7.31 9.56 0.08 29.1 228000 143000 1400
170 260 67 186 243 2 13.2 1020.0 640.0
170RU51 170RN51 170RJ51 170RF51 170RT51 170RP51 6.6929 10.4331 1.6535 7.38 9.75 0.1 19.4 114000 86500 1380
170 265 42 187 248 2.5 8.8 510.0 380.0
170RU91 170RN91 170RJ91 170RF91 170RT91 170RP91 6.6929 10.4331 3.0000 7.38 9.75 0.1 35.5 260000 166000 1380
170 265 76.2 187 248 2.5 16.1 1160.0 735.0
170RU02 170RN02 170RJ02 170RF02 170RT02 170RP02 6.6929 12.2047 2.0472 7.69 11.22 0.12 40.0 156000 132000 1250
170 310 52 195 285 3 18.2 695.0 585.0
170RU92 170RN92 170RJ92 170RF92 170RT92 170RP92 6.6929 12.2047 4.1250 7.72 11.19 0.12 80.6 430000 290000 1250
170 310 104.8 196 284 3 36.5 1930.0 1270.0
(1) (2)
Maximum shaft or housing fillet radius which bearing corners will clear. Limiting speed given for oil bath only; grease = oil.
2
327
170RU03 170RN03 170RJ03 170RF03 170RT03 170RP03 6.6929 14.1732 2.8346 8.06 12.81 0.12 84.1 228000 200000 1130
170 360 72 205 325 3 38.2 1020.0 880.0
170RU93 170RN93 170RJ93 170RF93 170RT93 170RP93 6.6929 14.1732 5.5000 8.06 12.81 0.12 162.4 585000 415000 1130
170 360 139.7 205 325 3 73.6 2600.0 1830.0
180RU51 180RN51 180RJ51 180RF51 180RT51 180RP51 7.0866 11.0236 1.7323 7.72 10.34 0.1 22.7 134000 100000 1300
180 280 44 196 263 2.5 10.3 600.0 440.0
180RU30 180RN30 180RJ30 180RF30 180RT30 180RP30 7.0866 11.0236 2.9134 7.75 10.38 0.08 38.4 280000 176000 1300
180 280 74 197 264 2 17.4 1250.0 780.0
180RU91 180RN91 180RJ91 180RF91 180RT91 180RP91 7.0866 11.0236 3.2500 7.75 10.31 0.1 42.9 325000 196000 1300
180 280 82.6 197 262 2.5 19.4 1430.0 880.0
180RU02 180RN02 180RJ02 180RF02 180RT02 180RP02 7.0866 12.5984 2.0472 8.06 11.62 0.12 41.6 160000 129000 1200
180 320 52 205 295 3 18.9 710.0 585.0
180RU92 180RN92 180RJ92 180RF92 180RT92 180RP92 7.0866 12.5984 4.2500 8.09 11.59 0.12 86.6 440000 285000 1200
180 320 108 206 294 3 39.3 1930.0 1270.0
180RU03 180RN03 180RJ03 180RF03 180RT03 180RP03 7.0866 14.9606 2.9528 8.5 13.56 0.12 97.0 270000 232000 1070
180 380 75 216 344 3 44.0 1200.0 1020.0
190RU30 190RN30 190RJ30 190RF30 190RT30 190RP30 7.4803 11.4173 2.9528 8.16 10.72 0.08 40.6 285000 176000 1250
190 290 75 207 272 2 18.4 1270.0 780.0
190RU51 190RN51 190RJ51 190RF51 190RT51 190RP51 7.4803 11.8110 1.8110 8.25 11.03 0.1 28.0 156000 114000 1230
190 300 46 210 280 2.5 12.7 695.0 510.0
190RU91 190RN91 190RJ91 190RF91 190RT91 190RP91 7.4803 11.8110 3.3750 8.25 11.06 0.1 52.5 365000 220000 1220
190 300 85.7 210 281 2.5 23.8 1630.0 980.0
190RU02 190RN02 190RJ02 190RF02 190RT02 190RP02 7.4803 13.3858 2.1654 8.5 12.38 0.12 50.0 208000 166000 1130
190 340 55 216 314 3 22.7 930.0 735.0
190RU92 190RN92 190RJ92 190RF92 190RT92 190RP92 7.4803 13.3858 4.5000 8.56 12.28 0.12 104.2 500000 325000 1130
190 340 114.3 217 312 3 47.3 2240.0 1460.0
190RU03 190RN03 190RJ03 190RF03 190RT03 190RP03 7.4803 15.7480 3.0709 9.16 14.06 0.16 113.5 290000 240000 1020
190 400 78 233 357 4 51.5 1320.0 1060.0
200RU30 200RN30 200RJ30 200RF30 200RT30 200RP30 7.8740 12.2047 3.2283 8.66 11.41 0.08 52.5 355000 212000 1180
200 310 82 220 290 2 23.8 1560.0 930.0
200RU51 200RN51 200RJ51 200RF51 200RT51 200RP51 7.8740 12.5984 1.8898 8.69 11.78 0.1 34.1 166000 122000 1150
200 320 48 221 299 2.5 15.5 735.0 550.0
200RU91 200RN91 200RJ91 200RF91 200RT91 200RP91 7.8740 12.5984 3.5000 8.69 11.78 0.12 63.4 365000 228000 1150
200 320 88.9 221 299 3 28.8 1630.0 1020.0
200RU02 200RN02 200RJ02 200RF02 200RT02 200RP02 7.8740 14.1732 2.2835 9.06 13 0.12 60.2 208000 163000 1070
200 360 58 230 330 3 27.3 930.0 735.0
(1) (2)
Maximum shaft or housing fillet which bearing corners will clear. Limiting speed given for oil bath only; grease = oil .
2
328
STANDARD STYLES C
Six styles of radial cylindrical roller bearings are shown below. Each r
style is identified by a special letter designation. The dimension and load
rating data applies to all six styles.
The inch series bearing numbers are presented in italicized type for
convenient reference.
Life calculations, shaft and housing fits, tolerances and other
technical data for these bearings are found in the Engineering section of
this catalog. r
Check for availability. D
d E
F
210RU51 210RN51 210RJ51 210RF51 210RT51 210RP51 8.2677 13.3858 1.9685 9.22 12.44 0.1 40.3 176000 134000 1090
210 340 50 234 316 2.5 18.3 780.0 600.0
210RU91 210RN91 210RJ91 210RF91 210RT91 210RP91 8.2677 13.3858 3.7500 9.16 12.5 0.1 77.7 440000 275000 1090
210 340 95.3 233 318 2.5 35.3 1960.0 1220.0
210RU02 210RN02 210RJ02 210RF02 210RT02 210RP02 8.2677 14.9606 2.4409 9.53 13.69 0.12 71.5 236000 190000 1020
210 380 62 242 348 3 32.4 1060.0 850.0
210RU92 210RN92 210RJ92 210RF92 210RT92 210RP92 8.2677 14.9606 5.0000 9.44 13.78 0.12 145.8 600000 400000 1020
210 380 127 240 350 3 66.1 2700.0 1760.0
210RU03 210RN03 210RJ03 210RF03 210RT03 210RP03 8.2677 17.3228 3.3071 9.94 15.66 0.16 146.2 325000 275000 920
210 440 84 252 398 4 66.3 1430.0 1220.0
85RIU391 85RIN391 85RIJ391 85RIF391 85RIT391 85RIP391 8.5000 11.5000 1.5000 9 11 0.12 16.5 122000 75000 1180
215.9 292.1 38.1 229 279 3 7.5 640.0 335.0
220RU30 220RN30 220RJ30 220RF30 220RT30 220RP30 8.6614 13.3858 3.5433 9.5 12.5 0.1 68.9 440000 260000 1070
220 340 90 241 318 2.5 31.2 1960.0 1160.0
220RU51 220RN51 220RJ51 220RF51 220RT51 220RP51 8.6614 13.7796 2.0079 9.59 12.84 0.1 43.2 193000 143000 1050
220 350 51 244 326 2.5 19.6 865.0 630.0
220RU91 220RN91 220RJ91 220RF91 220RT91 220RP91 8.6614 13.7796 3.8750 9.5 12.94 0.1 82.9 475000 290000 1050
220 350 98.4 241 329 2.5 37.6 2080.0 1290.0
220RU02 220RN02 220RJ02 220RF02 220RT02 220RP02 8.6614 15.7480 2.5591 10.06 14.38 0.12 84.4 260000 208000 970
220 400 65 256 365 3 38.3 1180.0 915.0
220RU92 220RN92 220RJ92 220RF92 220RT92 220RP92 8.6614 15.7480 5.2500 9.94 14.5 0.12 172.9 735000 455000 970
220 400 133.4 252 368 3 78.4 3250.0 2000.0
220RU03 220RN03 220RJ03 220RF03 220RT03 220RP03 8.6614 18.1102 3.4646 10.28 16.5 0.16 167.2 360000 305000 880
220 460 88 261 419 4 75.9 1600.0 1340.0
90RIU395 90RIN395 90RIJ395 90RIF395 90RIT395 90RIP395 9.0000 12.0000 1.5000 9.5 11.5 0.16 17.3 132000 80000 1120
228.6 304.8 38.1 241 292 4 7.8 585.0 355.0
90RIU396 90RIN396 90RIJ396 90RIF396 90RIT396 90RIP396 9.0000 14.5000 2.0000 10.03 13.47 0.2 48.4 208000 153000 1010
228.6 368.3 50.8 255 342 5 21.9 930.0 680.0
90RIU399 90RIN399 90RIJ399 90RIF399 90RIT399 90RIP399 9.0000 17.0000 4.6250 10.44 15.56 0.2 182.4 600000 415000 910
228.6 431.8 117.48 265 395 5 82.7 2600.0 1860.0
230RU51 230RN51 230RJ51 230RF51 230RT51 230RP51 9.0551 14.5669 2.0866 10.06 13.56 0.12 50.8 224000 163000 1000
230 370 53 256 344 3 23.1 1000.0 720.0
(1) (2)
Maximum shaft or housing fillet radius which bearing corners will clear. Limiting speed given for oil bath only; grease = oil .
2
329
230RU91 230RN91 230RJ91 230RF91 230RT91 230RP91 9.0551 14.5669 4.0000 10.06 13.56 0.12 97.7 550000 325000 1000
230 370 101.6 256 344 3 44.3 2450.0 1460.0
230RU02 230RN02 230RJ02 230RF02 230RT02 230RP02 9.0551 16.5354 2.7165 10.38 15.25 0.12 98.1 305000 240000 920
230 420 69 263 387 3 44.5 1370.0 1080.0
230RU92 230RN92 230RJ92 230RF92 230RT92 230RP92 9.0551 16.5354 5.5000 10.38 15.25 0.12 199.2 765000 490000 920
230 420 139 263 387 3 90.4 3400.0 2200.0
230RU03 230RN03 230RJ03 230RF03 230RT03 230RP03 9.0551 18.8976 3.5827 10.97 16.97 0.16 188.8 380000 315000 850
230 480 91 279 431 4 85.6 1700.0 1400.0
240RU30 240RN30 240RJ30 240RF30 240RT30 240RP30 9.4488 14.1732 3.6220 10.31 13.31 0.1 75.8 490000 275000 1000
240 360 92 262 338 2.5 34.4 2200.0 1220.0
240RU51 240RN51 240RJ51 240RF51 240RT51 240RP51 9.4488 15.3543 2.1654 10.44 14.38 0.12 59.8 236000 173000 950
240 390 55 265 365 3 27.2 1060.0 765.0
240RU91 240RN91 240RJ91 240RF91 240RT91 240RP91 9.4488 15.3543 4.2500 10.44 14.38 0.12 117.7 600000 355000 950
240 390 108 265 365 3 53.4 2700.0 1600.0
240RU02 240RN02 240RJ02 240RF02 240RT02 240RP02 9.4488 17.3228 2.8346 10.91 15.84 0.12 113.7 315000 250000 880
240 440 72 277 402 3 51.6 1400.0 1100.0
240RU92 240RN92 240RJ92 240RF92 240RT92 240RP92 9.4488 17.3228 5.7500 10.91 15.84 0.12 230.0 850000 540000 880
240 440 146 277 402 3 104.3 3750.0 2400.0
240RU03 240RN03 240RJ03 240RF03 240RT03 240RP03 9.4488 19.685 3.7402 11.38 17.75 0.16 215.0 450000 360000 810
240 500 95 289 451 4 97.5 2000.0 1600.0
95RIU430 95RIN430 95RIJ430 95RIF430 95RIT430 95RIP430 9.5000 12.7500 1.6250 10.03 12.22 0.16 21.5 156000 95000 1060
241.3 323.85 41.27 255 310 4 9.8 695.0 425.0
250RU51 250RN51 250RJ51 250RF51 250RT51 250RP51 9.8425 16.1417 2.2441 10.94 15.06 0.12 69.0 255000 190000 910
250 410 57 278 383 3 31.3 1140.0 850.0
250RU91 250RN91 250RJ91 250RF91 250RT91 250RP91 9.8425 16.1417 4.3750 10.94 15.06 0.12 134.3 610000 380000 910
250 410 111.1 278 383 3 60.9 2750.0 1700.0
250RU02 250RN02 250RJ02 250RF02 250RT02 250RP02 9.8425 18.1102 2.9921 11.47 16.47 0.16 131.8 360000 275000 850
250 460 76 291 418 4 59.8 1600.0 1220.0
250RU92 250RN92 250RJ92 250RF92 250RT92 250RP92 9.8425 18.1102 6.0000 11.47 16.47 0.16 263.9 915000 570000 850
250 460 152.4 291 418 4 119.7 4050.0 2550.0
250RU03 250RN03 250RJ03 250RF03 250RT03 250RP03 9.8425 20.4724 3.8583 11.81 18.5 0.2 240.3 475000 375000 780
250 520 98 300 470 5 109.0 2120.0 1660.0
100RIU433 100RIN433 100RIJ433 100RIF433 100RIT433 100RIP433 10.0000 13.2500 1.6250 10.59 12.66 0.16 22.4 163000 96500 1020
254 336.55 41.27 269 322 4 10.2 735.0 430.0
260RU30 260RN30 260RJ30 260RF30 260RT30 260RP30 10.2362 15.7480 4.0945 11.22 14.78 0.12 109.8 600000 345000 910
260 400 104 285 375 3 49.8 2600.0 1530.0
(1) (2)
Maximum shaft or housing fillet radius which bearing corners will clear. Limiting speed given for oil bath only; grease = oil.
2
330
STANDARD STYLES C
Six styles of radial cylindrical roller bearings are shown below. Each r
style is identified by a special letter designation. The dimension and load
rating data applies to all six styles.
The inch series bearing numbers are presented in italicized type for
convenient reference.
Life calculations, shaft and housing fits, tolerances and other
technical data for these bearings are found in the Engineering section of
this catalog. r
Check for availability. D
d E
F
260RU51 260RN51 260RJ51 260RF51 260RT51 260RP51 10.2362 16.9291 2.3228 11.44 15.72 0.12 79.6 270000 204000 870
10.2362
430
16.9291
59
4.5000
291
11.44
399
15.72
3
0.12
36.1
154.3
1200.0
695000
900.0
425000 870
2
260 430 114.3 291 399 3 70.0 3100.0 1900.0
260RU02 260RN02 260RJ02 260RF02 260RT02 260RP02 10.2362 18.8976 3.1496 11.81 17.31 0.16 150.4 400000 305000 810
260 480 80 300 440 4 68.2 1760.0 1370.0
260RU92 260RN92 260RJ92 260RF92 260RT92 260RP92 10.2362 18.8976 6.2500 11.81 17.31 0.16 300.4 1000000 630000 810
260 480 158.8 300 440 4 136.3 4400.0 2800.0
260RU03 260RN03 260RJ03 260RF03 260RT03 260RP03 10.2362 21.2598 4.0157 12.38 19.12 0.2 268.9 520000 415000 750
260 540 102 314 486 5 122.0 2320.0 1860.0
110RIU473 110RIN473 110RIJ473 110RIF473 110RIT473 110RIP473 11.0000 14.5000 1.7500 11.62 13.88 0.16 28.7 208000 118000 930
279.4 368.3 44.45 295 352 4 13.0 930.0 530.0
280RU30 280RN30 280RJ30 280RF30 280RT30 280RP30 11.0236 16.5354 4.1732 11.94 15.62 0.12 118.8 680000 380000 860
280 420 106 303 397 3 53.9 3050.0 1700.0
280RU51 280RN51 280RJ51 280RF51 280RT51 280RP51 11.0236 18.1102 2.4803 12.25 16.88 0.12 98.1 325000 228000 810
280 460 63 311 429 3 44.5 1430.0 1000.0
280RU91 280RN91 280RJ91 280RF91 280RT91 280RP91 11.0236 18.1102 4.8750 12.25 16.88 0.12 192.8 830000 475000 810
280 460 123.8 311 429 3 87.4 3750.0 2120.0
280RU02 280RN02 280RJ02 280RF02 280RT02 280RP02 11.0236 19.6850 3.1496 12.56 18.16 0.16 159.0 450000 335000 770
280 500 80 319 461 4 72.1 2000.0 1500.0
280RU92 280RN92 280RJ92 280RF92 280RT92 280RP92 11.0236 19.6850 6.5000 12.56 18.16 0.16 327.9 1180000 710000 770
280 500 165.1 319 461 4 148.7 5200.0 3150.0
280RU03 280RN03 280RJ03 280RF03 280RT03 280RP03 11.0236 22.8346 4.2520 13.44 20.44 0.2 327.6 620000 480000 700
280 580 108 341 519 5 148.6 2750.0 2160.0
300RU30 300RN30 300RJ30 300RF30 300RT30 300RP30 11.8110 18.1102 4.6457 13 16.91 0.12 166.0 830000 455000 790
300 460 118 330 429 3 75.3 3750.0 2040.0
300RU51 300RN51 300RJ51 300RF51 300RT51 300RP51 11.8110 18.8976 2.6378 12.94 17.78 0.12 108.2 375000 260000 770
300 480 67 329 452 3 49.1 1660.0 1160.0
300RU91 300RN91 300RJ91 300RF91 300RT91 300RP91 11.8110 18.8976 5.0000 12.94 17.78 0.12 205.1 900000 520000 770
300 480 127 329 452 3 93.0 4000.0 2320.0
300RU02 300RN02 300RJ02 300RF02 300RT02 300RP02 11.8110 21.2598 3.3465 13.5 19.56 0.16 199.6 510000 375000 710
300 540 85 343 497 4 90.5 2280.0 1660.0
300RU92 300RN92 300RJ92 300RF92 300RT92 300RP92 11.8110 21.2598 7.0000 13.5 19.56 0.16 415.6 1400000 830000 710
300 540 177.8 343 497 4 188.5 6200.0 3750.0
125RIU550 125RIN550 125RIJ550 125RIF550 125RIT550 125RIP550 12.5000 16.5000 2.0000 13.25 15.75 0.2 42.8 290000 160000 810
317.5 419.1 50.8 337 400 5 19.4 1290.0 710.0
(1) (2)
Maximum shaft or housing fillet radius which bearing corners will clear. Limiting speed given for oil bath only; grease = oil.
2
331
125RIU551 125RIN551 125RIJ551 125RIF551 125RIT551 125RIP551 12.5000 19.0000 2.6250 13.75 17.75 0.2 101.3 405000 260000 750
317.5 482.6 66.67 337 451 5 46.0 1800.0 1180.0
320RU30 320RN30 320RJ30 320RF30 320RT30 320RP30 12.5984 18.8976 4.7638 13.66 17.84 0.12 179.1 900000 480000 750
320 480 121 347 453 3 81.3 4050.0 2120.0
320RU51 320RN51 320RJ51 320RF51 320RT51 320RP51 12.5984 19.685 2.7953 13.88 18.41 0.12 120.7 425000 285000 730
320 500 71 352 468 3 54.7 1900.0 1270.0
320RU91 320RN91 320RJ91 320RF91 320RT91 320RP91 12.5984 19.6850 5.1250 13.88 18.41 0.12 221.2 980000 550000 730
320 500 130.2 352 468 3 100.3 4300.0 2450.0
320RU02 320RN02 320RJ02 320RF02 320RT02 320RP02 12.5984 22.8346 3.6220 14.5 20.94 0.16 253.4 550000 405000 670
320 580 92 368 532 4 114.9 2450.0 1800.0
320RU92 320RN92 320RJ92 320RF92 320RT92 320RP92 12.5984 22.8346 7.5000 14.56 20.88 0.16 521.1 1530000 900000 670
320 580 190.5 370 530 4 236.4 6700.0 4000.0
340RU30 340RN30 340RJ30 340RF30 340RT30 340RP30 13.3858 20.4724 5.2362 14.66 19.22 0.16 237.2 1040000 570000 700
340 520 133 372 488 4 107.6 4650.0 2550.0
135RIU580 135RIN580 135RIJ580 135RIF580 135RIT580 135RIP580 13.5000 18.0000 2.2500 14.38 17.12 0.2 60.0 345000 183000 750
342.9 457.2 57.15 365 435 5 27.2 1530.0 815.0
135RIU582 135RIN582 135RIJ582 135RIF582 135RIT582 135RIP582 13.5000 20.7500 4.1250 14.81 19.44 0.2 193.9 765000 455000 690
342.9 527.1 104.77 376 494 5 88.0 3450.0 2040.0
360RU30 360RN30 360RJ30 360RF30 360RT30 360RP30 14.1732 21.2598 5.2765 15.44 20 0.16 250.4 1100000 585000 670
360 540 134 392 508 4 113.6 4900.0 2600.0
145RIU610 145RIN610 145RIJ610 145RIF610 145RIT610 145RIP610 14.5000 19.5000 2.5000 15.38 18.62 0.2 79.0 455000 245000 690
368.3 495.3 63.5 391 473 5 35.8 2040.0 1100.0
380RU30 380RN30 380RJ30 380RF30 380RT30 380RP30 14.9606 22.0472 5.3150 16.22 20.78 0.16 263.4 1180000 610000 640
380 560 135 412 528 4 119.5 5200.0 2750.0
150RIU613 150RIN613 150RIJ613 150RIF613 150RIT613 150RIP613 15.0000 20.0000 2.5000 15.91 19.09 0.2 81.3 455000 245000 670
381 508 63.5 404 485 5 36.9 2040.0 1100.0
150RIU616 150RIN616 150RIJ616 150RIF616 150RIT616 150RIP616 15.0000 20.0000 2.8750 15.88 19.12 0.18 93.7 540000 280000 670
381 508 73.02 403 486 4.5 42.5 2400.0 12500.0
150RIU615 150RIN615 150RIJ615 150RIF615 150RIT615 150RIP615 15.0000 22.5000 4.5000 16.38 21.12 0.2 239.3 950000 540000 630
381 571.5 114.3 416 537 5 108.6 42500.0 2400.0
155RIU640 155RIN640 155RIJ640 155RIF640 155RIT640 155RIP640 15.5000 20.5000 2.5000 16.38 19.62 0.2 83.8 455000 245000 660
393.7 520.7 63.5 416 498 5 38.0 2040.0 1080.0
400RU30 400RN30 400RJ30 400RF30 400RT30 400RP30 15.7480 23.6220 5.8268 17.25 22.12 0.16 343.2 1340000 695000 600
400 600 148 438 562 4 155.7 6000.0 3100.0
160RIU643 160RIN643 160RIJ643 160RIF643 160RIT643 160RIP643 16.0000 21.5000 2.7500 17 20.5 0.2 106.2 560000 300000 630
406.4 546.1 69.85 432 521 5 48.2 2500.0 1320.0
160RIU644 160RIN644 160RIJ644 160RIF644 160RIT644 160RIP644 16.0000 23.7500 3.2500 17.5 22.25 0.2 190.4 630000 380000 590
406.4 603.25 82.55 444 565 5 86.4 2800.0 1700.0
(1) (2)
Maximum shaft or housing fillet radius which bearing corners will clear. Limiting speed given for oil bath only; grease = oil.
2
332
STANDARD STYLES C
Six styles of radial cylindrical roller bearings are shown below. Each
r
style is identified by a special letter designation. The dimension and load
rating data applies to all six styles.
The inch series bearing numbers are presented in italicized type for
convenient reference.
Life calculations, shaft and housing fits, tolerances and other
technical data for these bearings are found in the Engineering section of
this catalog. r
Check for availability. D
d E
F
160RIU645 160RIN645 160RIJ645 160RIF645 160RIT645 160RIP645 16.0000 23.7500 4.8750 17.41 22.34 0.2 285.4 1120000 600000 590
406.4 603.25 123.82 442 568 5 129.4 5000.0 2600.0 2
165RIU662 165RIN662 165RIJ662 165RIF662 165RIT662 165RIP662 16.5000 24.5000 5.0000 17.97 23.03 0.2 310.9 1200000 655000 580
419.1 622.3 127 456 585 5 141.0 5400.0 2900.0
420RU30 420RN30 420RJ30 420RF30 420RT30 420RP30 16.5354 24.4094 5.9055 18.03 22.91 0.16 362.6 1500000 750000 580
420 620 150 458 582 4 164.5 6550.0 3550.0
170RIU663 170RIN663 170RIJ663 170RIF663 170RIT663 170RIP663 17.0000 23.0000 3.0000 18.12 21.88 0.24 135.4 670000 355000 590
431.8 584.2 76.2 460 556 6 61.4 3000.0 1560.0
170RIU664 170RIN664 170RIJ664 170RIF664 170RIT664 170RIP664 17.0000 25.0000 3.5000 18.5 23.5 0.24 223.2 780000 455000 560
431.8 635 88.9 470 597 6 101.2 3450.0 2040.0
440RU30 440RN30 440RJ30 440RF30 440RT30 440RP30 17.3228 25.5906 6.1811 18.75 24.12 0.2 417.5 1660000 830000 550
440 650 157 476 613 5 189.4 7350.0 3650.0
180RIU683 180RIN683 180RIJ683 180RIF683 180RIT683 180RIP683 18.0000 27.0000 3.5000 19.69 25.31 0.24 270.1 780000 480000 520
457.2 685.8 88.9 500 643 6 122.5 3450.0 2160.0
180RIU684 180RIN684 180RIJ684 180RIF684 180RIT684 180RIP684 18.0000 27.0000 5.5000 19.69 25.31 0.24 423.8 1430000 765000 520
457.2 685.8 139.7 500 643 6 192.2 6300.0 3400.0
460RU30 460RN30 460RJ30 460RF30 460RT30 460RP30 18.1102 26.7717 6.4173 19.62 25.25 0.2 475.2 1800000 900000 530
460 680 163 498 641 5 215.6 8000.0 4000.0
185RIU696 185RIN696 185RIJ696 185RIF696 185RIT696 185RIP696 18.5000 27.5000 5.5000 20.19 25.81 0.24 434.6 1500000 800000 510
469.9 698.5 88.9 513 656 6 125.5 6550.0 3550.0
480RU30 480RN30 480RJ30 480RF30 480RT30 480RP30 18.8976 27.5591 6.4961 20.38 26.00 0.2 497.4 1830000 900000 510
480 700 165 518 660 5 225.6 8150.0 4000.0
500RU30 500RN30 500RJ30 500RF30 500RT30 500RP30 19.6850 28.3465 6.5748 21.25 26.78 0.2 518.7 1900000 930000 490
500 720 167 540 680 5 235.3 8300.0 4150.0
530RU30 530RN30 530RJ30 530RF30 530RT30 530RP30 20.8661 30.7087 7.2835 22.75 28.75 0.2 709.2 2360000 1140000 460
530 780 185 578 730 5 321.7 10600.0 5100.0
210RIU728 210RIN728 210RIJ728 210RIF728 210RIT728 210RIP728 21.0000 31.0000 6.3750 22.78 29.22 0.24 636.0 1900000 965000 450
533.4 787.4 161.92 579 742 6 288.5 8500.0 4300.0
220RIU744 220RIN744 220RIJ744 220RIF744 220RIT744 220RIP744 22.0000 28.0000 4.3750 23.12 26.88 0.2 247.3 1290000 550000 470
558.8 711.2 111.12 587 683 5 112.2 5700.0 2450.0
560RU30 560RN30 560RJ30 560RF30 560RT30 560RP30 22.0472 32.2835 7.6772 23.91 30.44 0.2 815.0 2550000 1250000 430
560 820 195 607 773 5 369.7 11400.0 5500.0
600RU30 600RN30 600RJ30 600RF30 600RT30 600RP30 23.6220 34.2520 7.8740 25.59 32.28 0.2 926.7 2800000 1340000 410
600 870 200 650 820 5 420.3 12500.0 6000.0
260RIU802 260RIN802 260RIJ802 260RIF802 260RIT802 260RIP802 26.0000 37.7500 5.0000 28.19 35.56 0.24 720.1 1630000 900000 370
660.4 958.85 127 716 903 6 326.6 7200.0 4000.0
275RIU808 275RIN808 275RIJ808 275RIF808 275RIT808 275RIP808 27.5000 40.0000 5.2500 29.81 37.69 0.24 850.3 1860000 1040000 350
698.5 1016 133.35 757 957 6 385.7 8300.0 4550.0
(1) (2)
Maximum shaft or housing fillet radius which bearing corners will clear. Limiting speed given for oil bath only; grease = oil.
2
333
D
In the bearing number: d E
F 52XX-WS A-52XX A-52XX-WS
W = double ribbed outer ring.
S = stamped steel land-riding cage. R
M = machined bronze land-riding cage. *Inner ring can be ordered seperately
DIMENSIONS
Bearing Number
Bearing with Brg. without Inner Ring Bore Outside Diam Width Shaft Housing Shaft Housing Wt.
Inner Ring Inner Ring Only d D C Shoulder Shoulder Fillet Fillet
Diameter Diameter *R †r
E F
max. max.
A-5220-WS — — 3.9370 100 7.0866 180 2.3750 60.325 4.62 117.5 6.56 166.7 0.16 4.0 0.08 2.0 15.9 7.2
(1)
— 5220 WS — 4.7690 121.133 7.0866 180 2.3750 60.325 — — 6.56 166.7 — — 0.08 2.0 12.1 5.5
— — A-5220 3.9370 100 4.7640 121.006 2.3750 60.325 4.62 117.5 — — 0.16 4.0 — — 3.8 1.7
A-5222-WS — — 4.3307 110 7.8740 200 2.7500 69.850 5.12 130.2 7.31 185.7 0.16 4.0 0.08 2.0 22.9 10.4
(1)
— 5222 WS — 5.2393 133.078 7.8740 200 2.7500 69.850 — — 7.31 185.7 — — 0.08 2.0 17.6 8.0
— — A-5222 4.3307 110 5.2343 132.951 2.7500 69.850 5.12 130.2 — — 0.16 4.0 — — 5.3 2.4
A-5224-WS — — 4.7244 120 8.4646 215 3.0000 76.200 5.69 144.5 7.75 196.8 0.19 4.8 0.08 2.0 28.6 13.0
(1)
— 5224 WS — 5.7191 145.265 8.4646 215 3.0000 76.200 — — 7.75 196.8 — — 0.08 2.0 21.7 9.8
— — A-5224 4.7244 120 5.7141 145.138 3.0000 76.200 5.69 144.5 — — 0.19 4.8 — — 6.9 3.1
A-5226-WS — — 5.1181 130 9.0551 230 3.1250 79.375 5.81 147.6 8.38 212.7 0.19 4.8 0.10 2.5 33.6 15.2
(1)
— 5226 WS — 6.1069 155.115 9.0551 230 3.1250 79.375 — — 8.38 212.7 — — 0.10 2.5 26.0 11.8
— — A-5226 5.1181 130 6.1013 154.973 3.1250 79.375 5.81 147.6 — — 0.19 4.8 — — 7.6 3.4
A-5228-WS — — 5.5118 140 9.8425 250 3.2500 82.550 6.50 165.1 9.12 231.8 0.19 4.8 0.10 2.5 41.7 18.9
(1)
— 5228 WS — 6.6379 168.603 9.8425 250 3.2500 82.550 — — 9.12 231.8 — — 0.10 2.5 31.9 14.5
— — A-5228 5.5118 140 6.6323 168.460 3.2500 82.550 6.50 165.1 — — 0.19 4.8 — — 9.8 4.4
A-5230-WS — — 5.9055 150 10.6299 270 3.5000 88.900 7.03 178.6 9.94 252.4 0.25 6.4 0.10 2.5 52.8 23.9
(1)
— 5230 WS — 7.1534 181.696 10.6299 270 3.5000 88.900 — — 9.94 252.4 — — 0.10 2.5 40.2 18.2
— — A-5230 5.9055 150 7.1474 181.544 3.5000 88.900 7.03 178.6 — — 0.25 6.4 — — 12.6 5.7
A-5232-WS — — 6.2992 160 11.4173 290 3.8750 98.425 7.50 190.5 10.56 268.3 0.25 6.4 0.10 2.5 67.8 30.8
(1)
— 5232 WS — 7.6294 193.787 11.4173 290 3.8750 98.425 — — 10.56 268.3 — — 0.10 2.5 51.9 23.5
— — A-5232 6.2992 160 7.6234 193.634 3.8750 98.425 7.50 190.5 — — 0.25 6.4 — — 15.9 7.2
A-5234-WS — — 6.6929 170 12.2047 310 4.1250 104.775 7.94 201.6 11.25 285.8 0.25 6.4 0.12 3.0 82.9 37.6
(1)
— 5234 WS — 8.0959 205.636 12.2047 310 4.1250 104.775 — — 11.25 285.8 — — 0.12 3.0 64.0 29.0
— — A-5234 6.6929 170 8.0899 205.483 4.1250 104.775 7.94 201.6 — — 0.25 6.4 — — 18.9 8.6
A-5236-WS — — 7.0866 180 12.5984 320 4.2500 107.950 8.31 211.1 11.72 297.7 0.25 6.4 0.12 3.0 89.0 40.4
(1)
— 5236 WS — 8.5213 216.441 12.5984 320 4.2500 107.950 — — 11.72 297.7 — — 0.12 3.0 68.0 30.8
— — A-5236 7.0866 180 8.5153 216.289 4.2500 107.950 8.31 211.1 — — 0.25 6.4 — — 21.0 9.5
A-5238-WS — — 7.4803 190 13.3858 340 4.5000 114.300 8.81 223.8 12.31 312.7 0.31 7.9 0.12 3.0 107.0 48.5
(1)
— 5238 WS — 9.0199 229.105 13.3858 340 4.5000 114.300 — — 12.31 312.7 — — 0.12 3.0 81.7 37.1
— — A-5238 7.4803 190 9.0131 228.933 4.5000 114.300 8.81 223.8 — — 0.31 7.9 — — 25.3 11.5
A-5240-WS — — 7.8740 200 14.1732 360 4.7500 120.650 9.25 235.0 12.81 325.4 0.31 7.9 0.12 3.0 127.0 57.6
(1)
— 5240 WS — 9.5421 242.369 14.1732 360 4.7500 120.650 — — 12.81 325.4 — — 0.12 3.0 97.0 44.0
— — A-5240 7.8740 200 9.5353 242.197 4.7500 120.650 9.25 235.0 — — 0.31 7.9 — — 30.0 13.6
A-5244-WM — — 8.6614 220 15.7480 400 5.2500 133.350 10.25 260.4 14.44 366.7 0.38 9.5 0.12 3.0 175.0 76.4
(1)
— 5244 WM — 10.4755 266.077 15.7480 400 5.2500 133.350 — — 14.44 366.7 — — 0.12 3.0 134.7 61.1
— — A-5244 8.6614 220 10.4687 265.905 5.2500 133.350 10.25 260.4 — — 0.38 9.5 — — 40.3 18.3
A-5248-WM — — 9.4488 240 17.3228 440 5.7500 146.050 11.22 285.0 15.84 402.4 0.38 9.5 0.12 3.0 234.0 106.1
(1)
— 5248 WM — 11.4712 291.368 17.3228 440 5.7500 146.050 — — 15.84 402.4 — — 0.12 3.0 180.2 81.7
— — A-5248 9.4488 240 11.4640 291.186 5.7500 146.050 11.22 285.0 — — 0.38 9.5 — — 53.8 24.4
(1)
* R is the maximum shaft fillet radius which bearing corners will clear. Minimum diameter under rollers.
† r is the maximum housing fillet radius which bearing corners will clear.
334
A-5222-WS
—
—
5222 WS
—
—
145000
145000
645000
645000
112000
112000
498000
498000
1940
1940
2
— — A-5222 — — — — —
335
in. in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm mm
4.7236 5.5108 -10 +22 +12 12T 32T 0 -10 10L 10T
120 140 -25 +56 +30 30T 81T 0 -25 25L 25T
5.5108 7.0856 -10 +28 +18 18T 38T 0 -10 10L 10T
140 180 -25 +71 +46 46T 97T 10 -25 25L 25T
7.0856 9.4476 -12 +32 +20 20T 44T 0 -12 12L 12T
180 240 -30 +81 +51 51T 112T 0 -30 30L 30T
(1)
When shaft is used as race surface, hardness to be Rc58 minimum and surface finish to be 15 RMS.
HOUSING FITS
All tolerances shown in ten thousandth (.0001") and micrometers (µm).
in. in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm mm
336
SHAFT DIAMETERS
RADIAL INTERNAL CLEARANCE (R6) 5200 BEARINGS WITHOUT INNER RING
Bearing Bore Radial Internal Bearing Slip Fit Housing* Press Fit Housing*
Clearance Number
Over Incl. min. max. max. min. max. min.
in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm
8.6614
220
9.4488
0.173
0.0072
0.254
0.0106 5232 WS
181.623
7.6265
181.597
7.6255
181.587
7.625
181.559
7.624
2
220 240 0.183 0.269 193.713 193.688 193.675 193.65
4.7244 7.0866 -10 -100 * All shaft diameters are based on a housing bore to housing O.D. ratio of 0.7.
120 180 -25 -254
337
TS single row
TSS single row steeper contact
angle
TDI two row converging contact
angles
TDOC, TDO two row diverging contact BEARING MODIFICATION CODE
angles
70 TS 340 A A 108
Modification code to Other modifications to
inner ring. the bearing.
Modification code to
outer ring
338
Radial
Tapered
Roller Bearings
Page Page
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340 DIMENSIONS — LOAD RATINGS
Design and Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340 Single Row TS, TSS Type . . . . . . . . . . . . . . . . . . . . . . . . . . 342 - 345
Bearing Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340, 341 Two-Row, Converging Angle, TDI Type . . . . . . . . . . . . . . . 346 - 347
339
INTRODUCTION
Timken Torrington tapered roller bearings are outstanding in their ability
to handle combinations of heavy radial and thrust loads at low or
intermediate speeds.
Four basic styles of tapered roller bearings are offered by Torrington:
single row, two-row converging, two-row diverging and four row. The
four-row style and steeper angle two row style, used predominantly in
metal mills, are described in a separate Timken publication, and are,
therefore, not included in this catalog.
Tapered roller bearings are shown in this catalog in bore sizes
starting at five inches. If a particular size and style combination is of
interest to you and is not listed, please contact a Timken sales engineer-
ing location for information on availability. Timken has the capability to
manufacture tapered roller bearings up to 168" (4270mm) outside
diameter, and is eager to work with designers to develop bearings for
specific needs.
Life and load calculations, tolerances, shaft and housing fits and other
technical data are found in the Engineering section of this catalog.
BEARING TYPES
Single-Row TS, TSS Types
Two types (TS and TSS) of single-row tapered roller bearings are
offered. Each has a cup, and a cone with a cage and roller assembly.
Type TS serves as the basic design for the TSS type.
Since single-row tapered roller bearings support thrust loads from
only one direction, the preferred mounting is in opposed pairs. The
proper internal clearance for the two bearings may be obtained by axial
adjustment at the time of assembly.
Type TSS bearings are similar to type TS, but have a steeper angle
of contact. These bearings are recommended for applications where
thrust is predominant.
TS TSS
340
TDI
Torrington type TDI bearing has a double-cone assembly and two
single-cups, and is supplied with a cup spacer unless otherwise
specified. It is important to submit sufficient application information to
allow determination of the proper internal clearance. The cup spacer for
each bearing is face ground after accurate measurement of the distance
between adjacent cup faces to obtain a predetermined internal
clearance for the bearing assembly. Consequently, spacers or compo-
nents may not be interchanged. A lubrication groove and oil holes are
included in the spacer. The type TDI bearing is suitable for roll neck
applications in light and medium duty metal rolling mills, and on many
other types of industrial equipment. Contact angle
lines converge
The design of type TDI is such that the contact angles converge as toward axis
they approach the axis of rotation. Consequently the use of these
bearings will not appreciably increase the rigidity of the shaft mounting,
and they should not be used singly on a shaft since they will not resist
overturning moments.
TDI Less rigid mounting
TDO, TDOC
The Torrington types TDO, and TDOC bearings have a double-cup, two
2
single-cone assemblies, and are supplied with a shaft supported cone
spacer unless otherwise specified. Spacers for individual bearings are
face ground to obtain the desired internal clearance for the assembly.
Spacers and components may not be interchanged. It is important to
submit sufficient application information to allow determination of the
proper internal clearance. TDO
Type TDO and TDOC style bearings are primarily used in a floating
cup mounting. The counterbored hole in the cup is for a drilled dowel
pin which prevents rotation of the loosely fitted double cup. Lubrication
may be introduced to the bearing through this hollow pin. The TDOC
style bearing incorporates the additional features of a lubrication groove Contact angle
and oil holes in the double cup for simplified lubrication through the outer lines diverge
toward axis
ring. Both of these style bearings may be lubricated through the shaft
by use of oil holes in the cone spacer. Type TDO style bearings
incorporate all the lubrication features of the TDOC style, but the dowel
hole feature is omitted. As the TDOC style bearing incorporate both TDOC More rigid mounting
outer ring lubrication features and a counter bored dowel hole, these
bearings may be submitted for both the TDO and formerly offered TDOD
style bearings.
In bearing types TDO, and TDOC the contact angles diverge as they
approach the axis of rotation, thus increasing the rigidity of the shaft
mounting. These bearings are, therefore, best suited for resisting
overturning moments. Due to increased bearing rigidity, housing bore
alignment is somewhat more critical than with the TDI style.
341
T
Single Row C C
T
D D
Db Db
da d da d
db db
Se Da Se Da
B B R
R
TS TSS
in. in. in. in. in. in. in. in. in. in. in. in. in. lbs. lbs. lbs.
mm mm mm mm mm mm mm mm mm mm mm mm mm rpm kN kN kg
70TS340AA108 7.0000 12.5970 3.500 3.3750 0.9375 2.5625 2.50 0.14 0.19 8.88 8.16 11.38 11.83 B 1.83 1190 213000 159000 68
177.800 319.964 88.9000 85.725 23.813 65.087 63.5 3.60 4.80 225.40 207.30 289.10 300.50 947.0 707.0 31
75TSS360AO109 7.5000 13.2500 3.8750 3.7500 1.0000 2.8750 4.82 0.25 0.25 9.84 8.28 11.69 12.81 B 0.99 1140 260000 194800 81
190.500 336.550 98.4250 95.250 25.400 73.025 122.4 6.40 6.40 249.90 210.30 296.9 325.40 1157.0 867.0 37
75TSS352BB1422 7.5000 16.8750 4.1875 3.7500 1.7500 2.4375 5.62 0.25 0.25 10.69 8.91 14.09 15.50 P 0.67 990 297000 204000 151
190.500 428.625 106.3630 95.250 44.450 61.912 142.7 6.40 6.40 271.50 226.20 358.00 393.70 1321.0 907.0 68
78TS380AO1249 7.8750 15.5000 4.3750 4.3750 1.0630 3.3125 2.99 0.25 0.25 10.25 9.37 13.37 14.03 S 1.96 1020 382000 279000 135
198.755 393.700 111.1250 111.125 27.000 84.137 75.9 6.40 6.40 260.30 238.00 339.60 356.40 1699.0 1241.0 61
80TSS406 8.0000 19.0000 4.6250 3.7500 1.7500 2.8750 5.35 0.25 0.25 12.34 10.56 16.31 17.75 B 0.69 850 323000 225000 208
203.200 482.600 117.4750 95.250 44.450 73.025 135.9 6.40 6.40 313.50 268.30 414.30 450.90 1437.0 1001.0 94
81TS426AA108 8.1250 13.2500 3.8750 3.9375 0.8125 3.0625 2.96 0.13 0.13 9.88 8.84 12.00 12.69 B 1.74 1140 302000 225300 76
206.375 336.550 98.4250 100.013 20.638 77.788 75.2 3.30 3.30 250.80 224.60 304.80 322.20 1343.0 1002.0 34
86TS425AA229 8.6250 14.1250 4.0000 4.0000 0.8750 3.1250 3.10 0.25 0.25 10.47 9.44 12.78 13.53 B 1.62 1140 312000 232500 88
219.075 358.775 101.6000 101.600 22.225 79.375 78.7 6.40 6.40 265.90 239.70 324.60 343.70 1388.0 1034.0 40
87TSS406 8.7500 19.0000 4.6250 3.7500 1.7500 2.8750 5.35 0.25 0.25 12.34 10.56 16.31 17.75 B 0.69 850 323000 225000 197
222.250 482.600 117.4750 95.250 44.450 73.025 135.9 6.40 6.40 313.50 268.30 414.30 450.90 1437.0 1001.0 89.4
90TS397CD108 9.0000 15.7500 3.5000 3.4375 1.0000 2.5000 3.36 0.41 0.13 11.25 10.22 14.00 14.75 B 1.27 950 278000 203200 98
228.600 400.050 88.9000 87.313 25.400 63.500 85.3 10.40 3.30 285.80 259.60 355.60 374.70 1237.0 904.0 44
90TS433AA957 9.0000 19.2500 2.5000 2.4395 0.9375 1.5625 2.92 0.25 0.25 11.19 10.47 14.13 14.63 P 1.24 950 198700 131000 224
228.600 488.950 63.5000 61.912 23.813 39.688 74.2 6.40 6.40 284.20 265.90 358.80 371.50 884.0 583.0 102
92TS442AA1005 9.2500 15.1250 4.4375 4.4375 0.8750 3.5625 3.34 0.25 0.25 11.31 10.12 13.50 14.25 S 1.76 980 403000 301000 115
234.950 384.175 112.7120 112.712 22.225 90.488 84.8 6.40 6.40 287.30 257.00 342.90 362.00 1793.0 1339.0 52
92TS442DB1422 9.2500 15.1250 4.4375 4.4375 0.8750 3.5625 3.34 0.25 0.25 11.31 10.13 13.50 14.25 P 1.76 980 458000 331000 113
234.950 384.175 112.7130 112.712 22.225 90.488 84.8 6.40 6.40 287.30 257.20 342.90 362.00 2037.0 1472.0 51.3
95TS443AA108 9.5000 17.5000 4.0000 3.9375 1.0000 3.0000 3.33 0.25 0.19 11.66 10.56 15.88 16.09 B 1.57 890 394000 282800 148
241.300 444.500 101.6000 100.013 25.400 76.200 84.6 6.40 4.80 296.20 268.20 403.20 408.80 1753.0 1258.0 67.1
(2)
* B = Machined Bronze; S = Stamped Steel; P = Pin Thrust factor K equals Radial Load Rating ÷ Thrust Load Rating. See page E58 in the Engineering
(1)
Maximum shaft or housing radius which bearing corners will clear. section for additional information.
(3)
Oil bath only; grease = oil
2
342
in. in. in. in. in. in. in. in. in. in. in. in. in. lbs. lbs. lbs.
mm mm mm mm mm mm mm mm mm mm mm mm mm rpm kN kN kg
97TS452AB108 9.750 16.000 4.5625 4.6250 0.8750 3.6875 3.40 0.25 0.25 11.84 10.78 14.44 15.18 B 1.92 920 449000 328200 131
97TS452BD1422
247.650
9.750
406.400 115.8870 117.475
0.8750
93.663
3.6880
86.4
3.40
6.40
0.25
6.40
0.25
300.80 273.80
11.84 10.78
366.70
14.44
385.80
513000
1460.0
362800
59.4
131
2
247.650 406.400 115.8870 117.475 22.225 93.675 86.4 6.40 6.40 300.80 273.80 366.80 385.80 2282.0 1614.0 59.4
100TS459CA1254 10.000 14.125 2.8125 2.8125 0.6875 2.1250 2.54 0.14 0.13 11.44 10.66 13.03 13.47 S 1.76 980 258000 178000 49
254.000 358.775 71.4380 71.438 17.463 53.975 64.5 3.60 3.30 290.50 270.70 331.00 342.10 1148.0 792.0 22.2
100TSS456FB1483 10.000 21.000 5.2500 4.7500 2.1875 3.0625 6.61 0.25 0.25 14.50 11.81 17.81 19.72 P 0.62 760 507300 358200 295
254.000 533.400 133.3500 120.650 55.563 77.788 167.9 6.40 6.40 368.30 300.00 452.40 500.90 2257.0 1593.0 133.8
102TS479DD265 10.250 16.625 3.3906 3.1406 0.7656 2.6250 2.76 0.27 0.13 12.16 11.44 15.09 15.59 B 1.78 880 290000 205700 97
260.350 422.275 86.1210 79.771 19.446 66.675 70.1 6.90 3.30 308.80 290.50 383.40 396.10 1290.0 915.0 44
105TSS482 10.500 17.500 4.7500 4.6250 1.2500 3.5000 4.63 0.25 0.25 13.22 11.32 15.72 17.09 B 1.01 840 445000 327800 162
266.700 444.500 120.6500 117.475 31.750 88.900 117.6 6.40 6.40 335.70 287.30 399.20 434.20 1979.0 1458.0 73.5
110TS9516AA1702 11.000 18.500 3.7500 3.6875 1.0000 2.7500 3.44 0.38 0.13 14.03 13.06 16.44 17.13 S 1.55 790 378300 267000 139
279.400 469.900 95.2500 93.663 25.400 69.850 87.4 9.70 3.30 356.40 331.70 417.60 435.10 1683.0 1188.0 63
115TS516AB108 11.500 18.500 3.7500 3.6875 1.0000 2.7500 3.64 0.38 0.13 13.47 12.41 16.56 17.34 B 1.38 800 368500 259800 133
292.100 469.900 95.2500 93.663 25.400 69.850 92.5 9.70 3.30 342.10 315.10 420.70 440.50 1639.0 1156.0 60.3
115TS534 11.500 20.496 5.0000 5.0000 1.1250 3.8750 4.29 0.50 0.25 14.53 13.13 18.18 19.19 B 1.51 740 575600 420700 254
292.100 520.598 127.0000 127.000 28.575 98.425 109.0 12.70 6.40 369.10 333.40 461.80 487.40 2560.0 1871.0 115
118TS9518 11.8125 16.625 3.2500 3.2500 0.7500 2.5000 3.02 0.25 0.13 13.59 12.72 15.38 15.93 S 1.74 830 317400 221900 76
300.037 422.275 82.5500 82.550 19.050 63.500 76.7 6.40 3.30 345.30 323.10 390.70 404.50 1412.0 987.0 34
120TS9557AO1249 12.000 17.500 2.5000 2.4375 0.9375 1.5625 2.85 0.31 0.06 14.03 13.41 16.28 16.69 S 1.55 790 207200 137900 68
304.800 444.500 63.5000 61.913 23.813 39.688 72.3. 7.90 1.50 356.40 340.60 413.50 423.90 921.0 613.0 30.8
120TS527AO149 12.000 22.000 5.3750 5.3750 1.5000 3.8750 4.85 0.05 0.25 15.25 13.75 19.50 20.56 B 1.35 690 626000 499900 315
304.800 558.800 136.5250 136.525 38.100 98.425 123.2 1.30 6.40 387.40 349.30 495.30 522.30 2785.0 2001.0 143
125TS9556AO1585 12.500 17.625 3.3750 3.3750 0.6875 2.6875 3.21 0.14 0.13 14.28 13.34 16.31 16.68 S 1.75 790 365000 255400 87
317.500 447.675 85.7250 85.725 17.463 68.263 81.5 3.60 3.30 362.70 338.80 414.30 423.70 1624.0 1136.0 39
125TS548AA108 12.500 23.500 5.3750 5.3750 1.5000 3.8750 5.12 0.78 0.25 16.09 14.44 20.72 21.97 B 1.25 660 707000 505000 346
317.500 596.900 136.5250 136.525 38.100 98.425 130.0 19.80 6.40 408.80 366.73 526.20 558.00 3145.0 2246.0 156.9
130TS561CD1005 13.000 19.000 3.3750 3.1560 1.0000 2.3750 3.32 0.25 0.13 15.00 14.00 17.50 18.13 S 1.48 740 349000 239100 100
330.200 482.600 85.7250 80.162 25.400 60.325 84.3 6.40 3.30 381.00 355.60 444.50 460.50 1552.0 1064.0 45.4
136TS587AA957 13.625 19.250 3.7500 3.7500 0.8120 2.9375 3.53 0.25 0.13 15.59 14.56 17.81 18.37 P 1.69 720 502000 338900 126
346.075 488.950 95.2500 95.250 20.625 74.613 89.7 6.40 3.30 396.10 369.90 452.40 469.1 2233.0 1508.0 55
137TS600 13.750 19.750 3.5625 3.3125 0.8125 2.7500 3.46 0.25 0.13 15.88 14.94 18.34 18.97 B 1.58 700 390000 269600 123
349.250 501.650 90.4880 84.138 20.638 69.850 87.9 6.40 3.30 403.40 379.50 465.90 479.20 1735.0 1199.0 56
150TS641CA1254 15.000 21.500 4.1250 4.1250 0.8750 3.2500 3.85 0.25 0.25 17.34 16.22 19.75 20.47 S 1.76 650 577000 401700 172
381.000 546.100 104.7750 104.775 22.225 82.550 97.8 6.40 6.40 440.40 412.00 501.70 519.90 2567.0 1787.0 78
(2)
* B = Machined Bronze; S = Stamped Steel; P = Pin Thrust factor K equals Radial Load Rating ÷ Thrust Load Rating. See page E58 in the
(1) Engineering section for additional information.
Maximum shaft or housing radius which bearing corners will clear.
(3)
Oil bath only; grease = oil
2 Continued on the next page.
343
C
T
TS TSS
in. in. in. in. in. in. in. in. in. in. in. in. in. lbs. lbs. lbs.
mm mm mm mm mm mm mm mm mm mm mm mm mm rpm kN kN kg
151TS642AA1250 15.1875 20.2500 3.2500 3.2500 0.7500 2.5000 3.90 0.25 0.13 17.09 15.97 18.81 19.50 S 1.40 670 429000 268000 96
385.763 514.350 82.550 82.550 19.050 63.500 99.1 6.40 3.30 434.10 405.60 477.80 495.30 1908.0 1272.0 44
151TS641BA1254 15.1250 21.5000 4.1250 4.1250 0.8750 3.2500 3.85 0.25 0.25 17.34 16.22 19.75 20.47 S 1.76 650 577000 401700 169
384.175 546.100 104.775 104.775 22.225 82.550 97.8 6.40 6.40 440.40 412.00 501.70 519.90 2567.0 1787.0 76.7
151TS641BA957 15.1250 21.5000 4.1250 4.1250 0.8750 3.2500 3.85 0.25 0.25 17.34 16.22 19.75 20.47 P 1.76 650 631100 429600 171
384.175 546.100 104.775 104.775 22.225 82.550 97.8 6.40 6.40 440.40 412.00 501.70 519.90 2807.0 1911.0 77.6
152TS660GD287 15.2460 21.5000 3.4375 3.4375 0.8120 2.6250 4.60 0.25 0.25 18.22 16.88 20.09 20.91 B 1.19 630 449000 303900 148
387.248 546.100 87.313 87.313 20.625 66.675 116.8 6.40 6.40 462.80 428.60 510.40 531.00 1997.0 1352.0 67.1
160TS652AA108 16.0000 20.0000 2.4375 2.4375 0.5625 1.8750 3.36 0.13 0.13 17.34 16.63 19.00 19.47 B 1.59 660 292000 191000 63
406.400 508.000 61.913 61.913 14.288 47.625 85.3 3.30 3.30 440.40 422.40 482.60 494.50 1299.0 850.0 28.6
160TS643 16.0000 21.6250 3.3750 3.3125 0.9375 2.4375 3.88 0.25 0.13 17.94 16.94 20.19 20.88 B 1.45 630 404300 274000 123
406.400 549.275 85.725 84.138 23.813 61.913 98.6 6.40 3.30 455.60 430.20 512.80 530.20 1798.0 1219.0 56
160TSS645AB128 16.0000 21.5000 3.0000 3.0000 0.8125 2.1875 5.23 0.25 0.25 18.09 16.81 20.03 20.88 B 0.94 630 333000 222500 112
406.400 546.100 76.200 76.200 20.628 55.563 132.8 6.40 6.40 459.60 427.00 508.80 530.20 1481.0 990.0 51
161TS660FD236 16.1250 21.5000 3.4375 3.4375 0.8125 2.6875 4.85 0.25 0.25 18.22 16.88 20.09 20.91 B 1.19 630 449000 303900 127
409.575 546.100 87.313 87.313 20.628 68.263 123.2 6.40 6.40 462.80 428.60 510.40 531.00 1997.0 1352.0 57.6
161TS662CA099 16.1875 24.0000 3.6250 3.3125 1.25 2.3750 3.70 0.27 0.25 18.50 17.69 22.09 22.59 P 1.59 590 458600 296900 181
411.163 609.600 92.075 84.137 31.75 60.325 94.0 6.90 6.40 469.90 449.30 561.20 573.90 2040.0 1321.0 82.1
163TS663AD1010 16.3750 23.2500 4.5000 4.5000 1.0000 3.5000 4.27 0.25 0.25 18.81 17.53 21.44 22.25 P 1.69 600 460000 506800 217
415.925 590.550 114.300 114.300 25.400 88.900 108.5 6.40 6.40 477.80 445.30 544.60 565.20 3318.0 2254.0 98.4
169TS672 16.9375 23.7500 3.0000 2.7500 1.0000 2.0000 4.47 0.25 0.25 19.16 18.28 22.03 22.66 B 1.17 580 328000 208600 133
430.213 603.250 76.200 69.850 25.400 50.800 113.5 6.40 6.40 486.60 464.30 559.60 575.50 1459.0 928.0 60
170TS670AA108 17.0000 21.0000 1.8125 1.8125 0.4375 1.3750 2.96 0.13 0.13 18.19 17.75 20.03 20.34 B 1.70 620 196000 121300 49
431.800 533.400 46.038 46.038 11.113 34.925 75.2 3.30 3.30 462.00 450.90 508.80 516.60 872.0 540.0 22.2
170TS668DC957 17.0000 22.5000 2.8750 2.8750 0.8440 2.0310 5.60 0.13 0.13 19.13 17.78 21.03 21.94 P 0.89 600 400700 268200 110
431.800 571.500 76.200 76.200 21.438 51.587 142.2 3.30 3.30 485.90 451.60 534.20 557.20 1782.0 1193.0 50
170TS688CA1254 17.0000 22.5000 2.9375 2.9375 0.8750 2.0625 4.88 0.13 0.13 19.13 17.75 20.88 21.63 S 1.07 600 387000 249000 110
431.800 571.500 74.613 74.613 22.225 52.387 124.0 3.30 3.30 485.90 450.90 530.40 549.40 1721.0 1108.0 49.9
176TS680AA957 17.6250 25.0000 4.7500 4.7500 1.0000 3.7500 4.58 0.25 0.25 20.19 18.81 23.13 24.00 P 1.68 550 864000 588600 269
447.675 635.000 120.650 120.650 25.400 92.250 116.3 6.40 6.40 512.80 477.80 587.40 609.60 3843.0 2618.0 122
176TS9680AA1254 17.6250 25.0000 4.7500 4.7500 1.0000 3.7500 4.48 0.25 0.25 20.34 19.03 23.03 23.84 S 1.76 550 803200 565400 266
447.675 635.000 120.650 120.650 25.400 92.250 113.8 6.40 6.40 516.70 483.40 585.00 605.60 3573.0 2515.0 121
180TS684 18.0000 23.5000 3.0000 2.8750 0.8750 2.1250 4.00 0.38 0.13 19.81 18.88 22.16 22.72 B 1.41 570 411000 265700 116
457.200 596.900 76.200 73.025 22.225 53.975 101.6 9.70 3.30 503.20 479.60 562.90 577.10 1828.0 1182.0 52.6
180TS698BA1032 18.0000 24.2500 3.3750 3.3750 0.7500 2.6250 3.86 0.25 0.25 20.78 19.81 22.88 23.47 S 1.76 550 554000 362000 160
457.200 615.950 85.725 85.725 19.050 66.675 98.0 6.40 6.40 527.80 503.20 581.20 596.10 2464.0 1610.0 73
180TS698AA1005 18.0000 24.2500 3.3750 3.3750 0.7500 2.6250 3.86 0.25 0.25 20.78 19.81 22.88 23.47 S 1.76 550 528800 349575 160
457.200 615.950 85.725 85.725 19.050 66.675 98.0 6.40 6.40 527.80 503.20 581.20 596.10 2352.0 1555.0 72.6
180TS693 18.0000 28.7460 4.7500 4.5000 1.5000 3.2500 4.14 0.38 0.25 21.22 20.25 26.03 26.72 B 1.84 510 712000 477800 383
457.200 730.148 120.650 120.650 38.100 82.550 105.2 9.70 6.40 539.00 514.40 661.20 678.70 3167.0 2125.0 173.7
(2)
* B = Machined Bronze; S = Stamped Steel; P = Pin Thrust factor K equals Radial Load Rating ÷ Thrust Load Rating. See page E58 in the
(1) Engineering section for additional information.
Maximum shaft or housing radius which bearing corners will clear.
(3)
Oil bath only; grease = oil
2
344
in. in. in. in. in. in. in. in. in. in. in. in. in. lbs. lbs. lbs.
mm mm mm mm mm mm mm mm mm mm mm mm mm rpm kN kN kg
188TS695CB957 18.875 26.750 5.0625 5.0625 1.0625 4.0000 4.86 0.25 0.25 21.84 20.34 24.91 25.84 P 1.69 510 956700 698100 329
479.425 679.450 128.5880 128.575 26.988 101.600 123.4 6.40 6.40 554.70 516.60 632.70 656.60 4256.0 3105.0 149.2
190TS698AA1005 19.000 24.250 3.3750 3.3750 0.7500 2.6250 3.86 0.25 0.25 20.78 19.81 22.88 23.47 S 1.76 550 528800 349575 145
482.600 615.950 85.7250 85.725 19.050 66.675 98.0 6.40 6.40 527.80 503.20 581.20 596.10 2352.0 1555.0 65.8
192TS9711AA1254 19.250 24.995 3.3125 3.3125 0.8750 2.4375 4.74 0.25 0.13 21.44 20.22 23.47 24.22 S 1.24 530 488000 318900 144
488.950 634.873 84.1380 84.138 22.225 61.913 120.4 6.40 3.30 544.50 513.60 596.11 615.16 2171.0 1419.0 65.32
192TS712AO130 19.253 24.995 3.1875 3.1875 0.6875 2.5000 4.05 0.25 0.13 21.47 20.53 23.62 24.49 B 1.62 530 486000 316800 147
489.026 634.873 80.9630 80.963 17.463 63.500 102.9 6.40 3.30 545.30 521.50 600.00 621.50 2162.0 1409.0 66.7
196TS712LB108 19.625 24.995 3.1875 3.1875 0.6875 2.5000 4.05 0.25 0.13 21.47 20.53 23.62 24.22 B 1.62 530 486000 316800 137
498.475 634.873 80.9630 80.963 17.463 63.500 102.9 6.40 3.30 545.30 521.50 600.00 615.20 2162.0 1409.0 62.1
197TS713FB1366 19.750 28.000 5.3750 5.3750 1.1875 4.1875 5.15 0.25 0.25 22.66 21.13 25.84 26.81 P 1.69 500 1070000 722800 380
200TS718
501.650
20.000
711.200
33.000
136.5250 136.525
5.7500 5.5000
30.162
1.6250
106.363
4.1250
130.8
6.39
6.40
0.38
6.40
0.38
575.46
24.16
536.70
22.44
656.44
29.78
681.03
1040000
3215.0
736700
172.4
672
2
508.000 838.200 146.0500 139.700 41.275 104.775 162.3 9.70 9.70 613.60 570.00 756.40 786.60 4626.0 3277.0 304.8
216TS742 21.625 27.250 3.1875 3.1875 0.7500 2.4375 4.43 0.25 0.25 23.56 22.56 25.81 26.41 B 1.56 480 549000 354500 158
549.275 692.150 80.9630 80.963 19.050 61.912 112.5 6.40 6.40 598.40 573.00 655.60 670.80 2442.0 1577.0 71.7
220TS746 22.000 29.000 3.4688 3.4688 0.9690 2.5000 4.36 0.25 0.25 24.19 23.28 27.25 27.84 B 1.71 460 612200 397200 215
558.800 736.600 88.1080 88.108 24.613 63.500 110.7 6.40 6.40 614.40 591.30 692.20 707.20 2723.0 1767.0 98
230TS757 23.000 27.000 1.9375 1.9375 0.5625 1.3750 4.45 0.14 0.13 24.41 23.75 25.91 26.31 B 1.35 470 178500 165000 68
584.200 685.800 49.2130 49.213 14.288 34.925 113.0 3.60 3.30 619.90 603.30 658.00 668.30 794.0 734.0 31
230TS758GE1359 23.000 35.500 5.9063 5.5000 1.6565 4.2500 5.69 0.31 0.36 26.78 25.31 32.41 33.38 P 1.65 400 1282000 875900 720
584.200 901.700 150.0200 139.700 42.075 107.950 144.5 7.90 9.10 680.20 642.90 823.10 847.70 5703.0 3896.0 327
239TS776DB1159 23.926 31.000 3.6875 3.6875 0.9380 2.7500 6.38 0.25 0.25 26.53 25.00 29.25 30.25 P 1.12 430 790000 497300 250
607.720 787.400 93.6630 93.663 23.825 69.850 162.1 6.40 6.40 673.90 635.00 743.00 768.40 3514.0 2212.0 113.4
240TS776CB229 24.000 31.000 3.6875 3.6875 0.9375 2.7500 6.38 0.25 0.25 26.53 25.00 29.25 30.25 P 1.12 430 790000 497300 250
609.600 787.400 93.6630 93.663 23.813 69.850 162.1 6.40 6.40 673.90 635.00 743.00 768.40 3514.0 2212.0 113
260TS808 26.000 33.625 3.3750 3.3650 1.0000 2.3750 4.86 0.38 0.25 28.34 27.41 31.75 32.31 B 1.69 400 706000 445000 265
660.400 854.075 85.7250 85.471 25.400 60.325 123.4 9.70 6.40 719.90 696.10 806.50 820.70 3140.0 1979.0 120.2
265TS810 26.500 31.250 2.6250 2.4375 0.6875 1.9375 4.50 0.25 0.25 28.03 27.31 30.09 30.50 B 1.62 410 465300 279300 123
673.100 793.750 66.6750 61.913 17.463 49.213 114.3 6.40 6.40 712.00 693.70 764.30 774.70 2070.0 1242.0 55.8
270TS812DA1784 27.000 34.500 3.6875 3.6250 0.9375 2.7500 5.94 0.25 0.25 29.33 28.31 32.56 33.34 P 1.37 380 857000 527800 298
685.800 876.300 93.6630 92.075 23.813 69.850 150.9 6.40 6.40 745.00 719.10 827.00 846.80 3812.0 2348.0 135.1
285TS815GA1418 28.500 36.000 3.3125 3.1875 0.9375 2.3750 5.29 0.13 0.25 30.78 29.91 34.16 34.78 P 1.55 370 723000 429400 274
723.900 914.400 84.1380 80.963 23.813 60.325 134.4 3.30 6.40 781.80 759.60 867.70 883.40 3216.0 1910.0 124.3
295TS821AA957 29.500 39.000 6.2795 6.2795 1.4375 4.8420 6.34 0.25 0.25 32.66 31.00 36.69 37.66 P 1.87 340 1818800 1191000 730
749.300 990.600 159.4990 159.499 36.513 122.987 161.0 6.40 6.40 829.60 787.40 931.90 956.60 8090.0 5298.0 331.1
295TS830AA957 29.500 38.000 3.6870 3.1875 1.6250 2.6250 6.30 0.25 0.13 32.94 31.87 35.59 36.25 P 1.32 350 748000 436000 307
749.300 965.200 93.6500 80.963 26.988 66.675 160.0 6.40 3.30 836.70 809.50 904.00 920.80 3470.0 1939.0 139.3
300TS830 30.000 38.000 3.6875 3.1875 1.6250 2.6250 6.23 0.25 0.13 32.94 31.88 35.59 36.25 B 1.32 350 647000 404000 324
762.000 965.200 93.6630 80.963 26.988 66.675 158.2 6.40 3.30 836.60 809.80 904.00 920.80 2998.0 1797.0 147
330TS834 33.000 41.000 3.6875 3.5000 1.0625 2.6250 6.91 0.25 0.25 35.63 34.34 39.00 39.78 B 1.31 320 950000 580600 372
838.200 1041.400 93.6630 88.900 26.988 66.675 175.5 6.40 6.40 904.90 872.20 990.60 1010.40 4226.0 2583.0 168.7
385TS863DB1177 38.500 44.500 2.6250 2.5000 0 .7500 1.8750 6.84 0.25 0.25 40.38 39.59 43.00 43.50 B 1.40 280 632000 351300 222
977.900 1130.300 66.6750 63.500 19.050 47.625 173.70 6.40 6.40 1025.60 1005.60 1092.20 1104.90 2811.0 1563.0 101
400TS864CC1177 40.000 50.000 4.0000 4.0000 1.3750 2.6250 8.02 0.38 0.38 43.16 41.94 47.47 48.22 B 1.38 260 1138000 683500 622
1016.000 1270.000 101.6000 101.600 34.925 66.675 203.70 9.65 9.65 1096.20 1065.20 1205.70 1224.80 5062.0 3040.0 282
(2)
* B = Machined Bronze; S = Stamped Steel; P = Pin Thrust factor K equals Radial Load Rating ÷ Thrust Load Rating. See page E58 in the
(1) Engineering section for additional information.
Maximum shaft or housing radius which bearing corners will clear.
(3)
Oil bath only; grease = oil
2
345
C
T
D
da d
Da
B
T
R
TDI
inch inch inch inch inch inch inch inch lbs. lbs. lbs.
mm mm mm mm mm mm mm mm RPM kN kN kg.
75TDI9415OO1249 7.5000 14.3720 6.0000 6.2500 0.13 0.13 9.36 12.53 S 1.46 1060 535100 378500 178
190.500 365.125 152.400 158.750 3.3 3.3 247.7 318.3 2381.0 1684.0 81
80TDI426BA1067 8.0000 13.2500 7.2500 7.1250 0.06 0.13 8.84 12.00 B 1.74 1110 604000 454600 152
203.200 336.550 184.150 180.975 1.5 3.3 224.6 304.8 2688.0 2023.0 68.9
81TDI426CC1482 8.1250 13.2500 7.2500 7.1250 0.06 0.13 8.87 12.00 P 1.74 1110 694600 504800 146
206.375 336.550 184.150 180.975 1.5 3.3 225.3 304.8 3091.0 2246.0 66.2
86TDI425AB108 8.6250 14.1250 7.8750 7.7500 0.06 0.25 9.44 12.78 B 1.62 1040 624000 465000 181
219.075 358.775 200.025 196.850 1.5 6.4 239.7 324.6 2777.0 2069.0 82
95TDI9451BB1633 9.5000 13.9990 4.3125 4.3125 0.13 0.19 10.41 12.59 S 1.66 1010 321800 220100 86
241.300 355.575 109.538 109.538 3.3 4.8 264.4 319.8 1431.0 979.0 39
97TDI452AB229 9.7500 16.0000 8.6250 8.5000 0.13 0.25 10.78 14.44 B 1.92 920 898000 656400 262
247.650 406.400 219.075 215.900 3.3 6.4 273.8 366.8 3995.0 2921.0 119
100TDI459AB672 10.0000 14.1250 5.1250 5.1250 0.06 0.13 10.66 13.03 B 1.76 980 454000 323000 97
254.000 358.775 130.175 130.175 1.5 3.3 270.7 331.0 2020.0 1437.0 44
100TDI457BA672 10.0000 17.5000 5.2500 5.2500 0.13 0.25 11.47 15.66 B 1.69 860 524000 358000 206
254.000 444.500 133.350 133.350 3.3 6.4 291.3 397.7 2332.0 1593.0 93
106TDI480BE1491 10.6250 15.0000 5.3750 5.3750 0.13 0.13 11.31 13.94 B 1.76 920 502000 354600 118
269.875 381.000 136.525 136.525 3.3 3.3 287.3 354.1 2234.0 1578.0 53.5
110TDI491CC1484 11.0000 18.0000 9.6250 9.6250 0.06 0.25 12.03 16.28 P 1.78 810 1200000 920600 356
279.400 457.200 244.475 244.475 1.5 6.4 305.6 413.5 5340.0 4096.0 161.5
115TDI534 11.5000 20.4960 9.5000 9.5000 0.50 0.25 13.13 18.17 B 1.51 740 1151200 841400 516
292.100 520.598 241.300 241.300 12.7 6.4 333.4 461.5 5122.0 3744.0 234
118TDI518BO1471 11.8125 16.6250 5.9375 5.9375 0.25 0.13 12.59 15.41 P 1.69 830 714000 500200 154
300.038 422.275 150.813 150.813 6.4 3.3 319.9 391.3 3177.0 2226.0 69.9
119TDI513AA957 11.9375 19.5000 10.3750 10.3750 0.13 0.25 13.34 17.59 P 2.33 750 1460000 1050000 449
303.213 495.300 263.525 263.575 3.3 6.4 338.9 452.0 6497.0 4672.0 204
119TDI528BA234 11.9940 17.2460 5.1875 5.1875 0.13 0.13 13.00 15.91 B 1.76 810 556000 391800 152
304.648 438.048 131.763 131.763 3.3 3.3 330.2 404.1 2474.0 1743.0 69
120TDI515AA108 12.0000 19.5000 6.5000 6.7500 0.13 0.25 13.50 17.34 B 1.46 750 766400 540800 302
304.800 495.300 165.100 171.450 3.3 6.4 342.9 440.5 3410.0 2406.0 137
131TDI582LD1731 13.1250 18.5000 6.5625 6.5625 0.13 0.13 14.00 17.06 S 1.74 750 874800 604400 236
333.375 469.900 166.688 166.688 3.3 3.3 355.6 433.4 3891.0 2688.0 107
135TDI9589AA1709 13.5000 21.0000 5.7500 5.5000 0.25 0.25 15.09 18.94 S 1.76 700 646800 435800 281
342.900 533.400 146.050 139.700 6.4 6.4 383.3 481.1 2877.0 1939.0 127
135TDI590BG1775 13.5060 17.9960 4.8125 4.8125 0.06 0.13 14.19 16.81 S 1.24 750 536000 354000 125
343.052 457.098 122.238 122.238 1.5 3.3 360.4 427.0 2384.0 1575.0 57
(2)
* B = Machined Bronze; S = Stamped Steel; P = Pin Thrust factor K equals Radial Load Rating ÷ 2 Thrust Load Rating. See page E58 in the
(1) Engineering section for additional information.
Maximum shaft or housing radius which bearing corners will clear.
(3)
Oil bath only; grease = oil
2
346
136TDI591AO696 13.6250 19.2500 6.8750 6.8750 0.13 0.13 14.56 17.81 P 1.69 720 980000 669600 238
346.075 488.950 174.625 174.625 3.3 3.3 369.8 452.4 4359.0 2979.0 108
145TDI9611AE1679 14.5000 20.6250 7.3125 7.3125 0.25 0.25 15.69 18.97 S 1.76 670 941600 660200 190
368.300 523.875 185.738 185.738 6.4 6.4 398.5 481.8 4188.0 2938.0 86.2
151TDI641AA957 15.1250 21.5000 7.6250 7.6250 0.13 0.25 16.22 19.75 P 1.76 650 126200 859200 338
384.175 546.100 193.675 193.675 3.3 6.4 412.0 501.7 5615.0 3823.0 153
160TDI649 16.0000 21.5000 5.4375 5.4375 0.06 0.25 16.84 20.13 B 1.22 630 720000 479000 214
406.400 546.100 138.112 138.112 1.5 6.4 427.8 511.3 3204.0 2131.0 97.1
160TDI654AA179 16.0030 26.4980 7.6875 7.6875 0.13 0.25 18.41 24.03 B 1.64 550 1276000 874400 664
161TDI9660AA1652
406.476
16.1250
673.049
21.5000
195.263
6.3750
195.263
6.3750
3.3
0.06
6.4
0.25
467.6
16.86
610.4
949500
3891.0
640000
301.2
244 2
409.575 546.100 161.925 161.925 1.5 6.4 428.6 508.8 4225.0 2848.0 110.7
162TDI661AA229 16.2500 24.4094 8.8125 8.8125 0.50 0.25 18.31 22.34 B 1.69 570 1402000 975400 566
412.750 619.999 223.837 223.837 12.70 6.4 465.1 567.5 6236.0 4340.0 257
163TDI663FA1084 16.3750 23.2500 8.2500 8.2500 0.38 0.25 17.53 21.44 P 1.69 600 1492000 1013600 427
415.925 590.550 209.550 209.550 9.70 6.4 445.3 544.6 6637.0 4510.0 194
165TDI665 16.5000 24.5000 6.1250 6.1250 0.14 0.27 18.06 22.53 B 1.66 580 900000 593800 297
419.100 622.300 155.575 155.575 3.60 6.90 458.8 572.3 4004.0 2641.0 135
165TDI664BA542 16.5000 29.0000 14.0000 14.0000 0.25 0.25 18.50 26.03 B 1.59 520 2644000 1873200 1488
419.100 736.600 355.600 355.600 6.40 6.4 469.9 661.2 11765.0 8335.0 675
176TDI680AA957 17.6250 25.0000 8.8125 8.8125 0.13 0.25 18.81 23.13 P 1.68 550 1728200 1177200 528
447.675 635.000 223.837 223.837 3.30 6.4 472.7 587.5 7690.0 5238.0 239.5
176TDI9680BA1652 17.6250 25.0000 8.8125 8.8125 0.13 0.25 19.03 23.03 S 1.76 550 1606400 1130800 531
447.675 635.000 223.837 223.837 3.3 6.4 483.4 585.0 7146.0 5030.0 241
180TDI683BA427 17.995 29.5000 16.2500 16.5000 0.13 0.25 20.09 26.53 P 2.33 500 3790000 2711400 1726
457.073 749.300 412.750 419.100 3.3 6.4 510.4 673.9 16859.0 12061.0 782.9
180TDI9684AB1804 18.0000 23.5000 5.1250 5.2500 0.06 0.13 19.03 21.88 P 1.45 570 850400 546400 194
457.200 596.900 130.175 133.350 1.50 3.30 483.4 555.8 3783.0 2430.0 88
180TDI685CC1464 18.0000 33.9960 14.5000 14.5000 0.25 0.25 21.22 29.88 P 1.76 450 3310000 2394000 2279
457.200 863.498 368.300 368.300 6.4 6.4 539.0 759.0 14729.0 10649.0 1034
188TDI695DB1048 18.8750 26.7500 9.3750 9.3750 0.13 0.25 20.34 24.91 P 1.69 510 2053400 1396200 644
479.425 679.450 238.125 238.125 3.30 6.4 516.7 632.6 9134.0 6211.0 292
192TDI712AO130 19.2530 24.9950 6.0000 6.0000 0.13 0.13 20.53 23.63 B 1.62 530 972000 633600 293
489.026 634.873 152.400 152.400 3.3 3.30 521.5 600.1 4325.0 2819.0 133
197TDI713BA838 19.7500 28.0000 9.8750 9.8750 0.13 0.25 21.13 25.84 P 1.69 490 2140000 1445600 745
501.650 711.200 250.825 250.825 3.3 6.4 536.6 656.4 9519.0 6430.0 338
204TDI721AA957 20.4375 29.0000 10.1875 10.1875 0.13 0.25 22.16 26.91 P 1.69 470 2390000 1604600 837
519.113 736.600 258.763 258.763 3.3 6.4 562.8 683.4 10631.0 7138.0 380
220TDI748CC1209 21.9950 35.4950 8.3750 8.8125 0.13 0.25 24.84 32.03 P 1.40 410 1960000 1302000 1279
558.673 901.573 212.725 223.837 3.3 6.4 630.9 813.6 8719.0 5792.0 580
220TDI745AA957 22.0000 29.0000 7.7500 7.7500 0.13 0.25 23.13 27.25 P 1.71 460 1780000 1158400 527
558.800 736.600 196.850 196.850 3.30 6.4 587.5 692.2 7918.0 5153.0 239
355TDI860AA957 35.5000 51.0000 17.2500 17.7500 0.19 0.50 38.16 47.06 P 1.8 270 7280000 5031600 4503
901.700 1295.4 438.150 450.850 4.80 12.7 969.2 1195.3 32383.0 22382.0 2043
(2)
* B = Machined Bronze; S = Stamped Steel; P = Pin Thrust factor K equals Radial Load Rating ÷ Thrust Load Rating. See page E58 in the
(1) Engineering section for additional information.
Maximum shaft or housing radius which bearing corners will clear.
(3)
Oil bath only; grease = oil
2
347
C C
cb
r r
ka
kb
D D
da d da d cup
Se Da Da
Se
T T cb
R R Dowel hole and pin dimensions
for TDOC bearings
TDO TDOC
75TDOC9421BB1254 7.5000 12.5000 5.7500 4.3750 6.35 0.22 0.06 9.81 11.75 — — — S 1.12 1140 366400 253400 102
190.500 317.500 146.050 111.125 161.4 5.6 1.5 249.2 298.5 — — — 1630.0 1127.0 46
75TDO414AA1029 7.5000 14.5000 7.6250 5.3750 6.45 0.25 0.06 10.09 13.41 — — — B 1.45 1050 484000 365000 197
190.500 368.300 193.675 136.525 163.8 6.4 1.5 256.3 340.6 — — — 2153.0 1624.0 89
75TDO415AA198 7.5000 14.5000 7.6250 5.3750 6.58 0.25 0.06 10.09 13.47 — — — B 1.35 1060 512000 376600 196
190.500 368.300 193.675 136.525 167.1 6.4 1.5 256.3 342.1 — — — 2277.0 1675.0 88.9
80TDO9421AO1585 8.0000 12.5000 5.7500 4.3750 6.38 0.22 0.06 9.81 11.75 — — — S 1.12 1160 366500 258100 97
203.200 317.500 146.050 111.125 162.1 5.6 1.5 249.2 298.5 — — — 1630.0 1148.0 44
81TDO9426A 8.1250 13.2500 8.3125 6.6875 6.47 0.13 0.06 10.00 12.50 — — — S 1.76 1110 609200 450600 158
206.375 336.550 211.138 169.862 164.3 3.3 1.5 254.0 317.5 — — — 2710.0 2004.0 72
86TDOC9429AA1861 8.6875 12.3750 5.1875 4.1875 4.82 0.25 0.06 9.97 11.77 1.12 0.87 0.37 S 1.76 1120 387000 268000 71
220.663 314.325 131.763 106.363 122.5 6.4 1.5 253.2 299.0 28.4 22.1 9.4 1721.0 1192.0 32.2
90TDO9448AA1254 9.0000 12.8750 4.5000 3.2500 5.04 0.25 0.06 10.59 12.20 — — — S 1.44 1070 302600 202800 72
228.600 327.025 114.300 82.550 128.0 6.4 1.5 269.0 309.9 — — — 1346.0 902.0 33
90TDO397 9.0000 15.7500 7.3750 5.3750 7.22 0.41 0.06 11.25 14.75 — — — B 1.27 950 556000 406400 208
228.600 400.050 187.325 136.525 183.4 10.4 1.5 285.8 374.7 — — — 2473.0 1808.0 94
90TDO393 9.0000 16.7500 8.2500 6.2500 6.70 0.28 0.06 11.34 15.50 — — — B 1.74 920 667000 483000 273
228.600 425.450 209.550 158.750 170.2 7.1 1.5 288.0 393.7 — — — 2967.0 2148.0 124
92TDO442AA1005 9.2500 15.1250 9.3750 7.6250 7.17 0.25 0.06 11.31 14.24 — — — S 1.76 980 806000 602000 231
234.950 384.175 238.125 193.675 182.1 6.4 1.5 287.3 361.7 — — — 3585.0 2678.0 105
95TDO446AA229 9.5000 16.0000 8.5000 7.2500 7.10 0.25 0.06 10.72 15.19 — — — B 1.62 930 764000 562000 251
241.300 406.400 215.900 184.150 180.3 6.4 1.5 272.3 385.8 — — — 3398.0 2500.0 114
98TDO455AO167 9.8130 15.0000 6.7500 5.0000 7.91 0.25 0.06 11.66 14.44 — — — B 1.02 960 490000 349600 155
249.250 381.000 171.450 127.000 200.9 6.4 1.5 296.2 366.8 — — — 2180.0 1555.0 70.3
100TDOC459CA1254 10.0000 14.1250 6.0000 4.6250 5.46 0.14 0.06 11.84 13.47 1.25 1.00 0.34 S 1.76 980 516000 356000 97
254.000 358.775 152.400 117.475 138.7 3.6 1.5 300.7 342.1 31.8 25.4 8.6 2295.0 1584.0 44
100TDO490OA180 10.0000 16.0000 6.1250 4.2500 7.09 0.25 0.06 12.63 15.28 — — — B 1.24 880 428000 294600 105
254.000 406.400 155.575 107.950 180.1 6.4 1.5 320.8 388.1 — — — 1904.0 1310.0 47.6
102TDO479OB1547 10.2500 16.6250 7.0312 5.5000 6.26 0.27 0.06 12.16 15.59 — — — B 1.78 880 580000 411400 202
260.350 422.275 178.592 139.700 159.0 6.9 1.5 308.9 396.0 — — — 2580.0 1830.0 92
(2)
* B = Machined Bronze; S = Stamped Steel; P = Pin Thrust factor K equals Radial Load Rating ÷ Thrust Load Rating. See page E58 in the
(1) Engineering section for additional information.
Maximum shaft or housing radius which bearing corners will clear.
(3)
Oil bath only; if grease = oil
2
348
105TDOC488BA1254 10.5000 14.0000 5.0000 4.0000 5.38 0.13 0.06 11.75 13.50 1.25 1 0.31 S 1.62 960 418400 281000 72
266.700 355.600 127.000 101.600 136.6 3.3 1.5 298.5 342.9 31.8 25.4 7.9 1861.0 1250.0 33
106TDO480BB108 10.6250 15.0000 6.2500 4.8750 5.74 0.25 0.06 12.06 14.44 — — — B 1.76 920 502000 354600 122
269.875 381.000 158.750 123.825 145.8 6.4 1.5 306.3 366.8 — — — 2233.0 1577.0 55
113TDO540 11.3750 16.0000 6.5000 5.1250 6.24 0.25 0.06 12.97 15.34 — — — B 1.69 860 556800 390000 144
288.925 406.400 165.100 130.175 158.5 6.4 1.5 329.4 389.6 — — — 2477.0 1735.0 65
115TDOC516DA957 11.5000
292.100
18.5000
469.900
7.8750
200.025
5.8750
149.225
7.72
196.1
0.38
9.7
0.06
1.5
13.47
342.1
17.34
440.4
1.37
34.8
1.12
28.4
0.46
11.7
P 1.38 800 806000
3585.0
556000
2473.0
273
123.8 2
115TDOC9516AA1254 11.5000 18.5000 7.8500 5.8750 7.37 0.38 0.06 14.03 17.13 1.37 1.12 0.46 S 1.55 790 755600 534000 279
292.100 469.900 199.390 149.225 187.2 9.7 1.5 356.4 435.1 34.8 28.4 11.7 3361.0 2375.0 127
118TDO9518AA1293 11.8125 16.6250 6.8750 5.3750 6.42 0.25 0.06 13.59 15.94 — — — S 1.74 830 634800 443800 159
300.037 422.275 174.625 136.525 163.1 6.4 1.5 345.2 404.9 — — — 2824.0 1974.0 72
120TDOC523DA1254 12.0000 15.5000 4.2500 3.2500 5.17 0.25 0.06 13.25 14.91 1.13 0.87 0.31 S 1.63 860 360000 232600 66
304.800 393.700 107.950 82.550 131.3 6.4 1.5 336.5 378.7 28.7 22.1 7.9 1601.0 1035.0 29.9
120TDO525 12.0000 16.2500 4.8750 3.6250 6.36 0.25 0.06 13.34 15.69 — — — B 1.35 840 394000 265400 107
304.800 412.750 123.825 92.075 161.5 6.4 1.5 338.8 398.5 — — — 1753.0 1181.0 49
120TDO9515AA1254 12.0000 19.5000 7.7500 5.7500 7.57 0.63 0.06 14.13 18.13 — — — S 1.46 750 806200 558600 305
304.800 495.300 196.850 146.050 192.3 16 1.5 358.9 460.5 — — — 3586.0 2485.0 139
120TDO527CA262 12.0000 22.0000 11.7500 8.7500 10.62 0.05 0.06 15.25 20.56 — — — B 1.35 690 1252000 899800 673
304.800 558.800 298.450 222.250 269.7 1.3 1.5 387.3 522.2 — — — 5569.0 4003.0 305
122TDOS9550AO1249 12.2500 22.0000 7.5000 4.3750 12.79 0.38 0.13 15.22 19.22 — — — S 0.66 730 658000 442000 473
311.150 558.800 190.500 111.125 324.9 9.7 3.3 386.6 488.2 — — — 2927.0 1966.0 214.5
125TDO557 12.5000 17.5000 5.7500 3.8750 6.58 0.31 0.06 14.03 16.69 — — — B 1.49 790 470000 287000 139
317.500 444.500 146.050 98.425 167.1 7.9 1.5 356.4 423.9 — — — 2091.0 1277.0 63
125TDOC9556AA1254 12.5000 17.6250 7.1250 5.7500 6.69 0.14 0.06 14.28 16.94 1.5 1.12 0.4 S 1.75 790 730000 510800 190
317.500 447.675 180.975 146.050 169.9 3.6 1.5 362.7 430.3 38.1 28.4 10.2 3247.0 2272.0 86
130TDOC560 13.0000 16.3750 3.9375 2.9375 6.51 0.14 0.06 14.25 15.94 1.13 .87 .31 B 1.21 800 306000 202000 67
330.200 415.925 100.012 74.613 165.4 3.6 1.5 362.0 404.9 28.7 22.1 7.9 1361.0 898.0 30
130TDO561CD1005 13.0000 19.0000 7.0000 5.0000 7.33 0.25 0.06 14.94 18.12 — — — S 1.48 740 694000 478200 200
330.200 482.600 177.800 127.000 186.2 6.4 1.5 379.5 460.2 — — — 3087.0 2127.0 91
131TDOC582BA957 13.1250 18.5000 7.5000 6.0000 7.02 0.25 0.06 15.00 17.68 1.3 1.12 .46 P 1.74 750 928000 632000 223
333.375 469.900 190.500 152.400 178.3 6.4 1.5 381.0 449.1 34.8 28.4 11.7 4128.0 2811.0 101
131TDO582BA1072 13.1250 18.5000 7.5000 6.0000 7.02 0.25 0.06 15.00 17.68 — — — P 1.74 750 928000 632000 223
333.375 469.900 190.500 152.400 178.3 6.4 1.5 381.0 449.1 — — — 4128.0 2811.0 101.2
136TDOC587AB957 13.6250 19.2500 7.8750 6.2500 7.36 0.25 0.06 15.59 18.37 1.37 1.12 0.47 P 1.75 720 1004000 677800 258
346.075 488.950 200.025 158.750 186.9 6.4 1.5 396.0 466.6 34.8 28.45 11.94 4466.0 3015.0 117
137TDOC600OA180 13.7500 20.2500 7.6250 6.0000 7.94 0.25 0.06 15.88 18.97 1.5 1.25 0.46 B 1.58 700 780000 539200 288
349.250 514.350 193.675 152.400 201.7 6.4 1.5 403.4 481.8 38.1 31.8 11.7 3470.0 2398.0 130.6
140TDOC580AA1254 14.0000 17.5000 5.3750 4.3750 5.93 0.14 0.06 15.34 16.84 1.13 .87 .37 S 1.90 750 526000 336000 111
355.600 444.500 136.525 111.125 150.6 3.6 1.5 389.6 427.7 28.7 22.1 9.4 2340.0 1495.0 50.3
140TDO615 14.0000 19.7500 6.1250 4.2500 8.86 0.25 0.06 16.62 19.09 — — — B 1.10 680 576000 384600 207
355.600 501.650 155.575 107.950 225.0 6.4 1.5 422.1 484.9 — — — 2562.0 1711.0 94
349
C C
cb
r r
ka
kb
D D
da d da d
Da Da cup
Se Se
T T cb
R R
Dowel hole and pin dimensions
for TDOC bearings
TDO TDOC
140TDOC600OA180 14.0000 20.2500 7.6250 6.0000 7.94 0.25 0.06 15.88 18.97 1.5 1.25 0.46 B 1.58 700 780000 539200 277
355.600 514.350 193.675 152.400 201.7 6.4 1.5 403.4 481.8 38.8 31.8 11.7 3470.0 2398.0 126
145TDO611AA1159 14.4980 20.6250 8.4375 6.6875 8.02 0.25 0.06 16.66 19.72 — — — P 1.69 670 1151200 780800 316
368.249 523.875 214.313 169.862 203.7 6.4 1.5 423.2 500.9 — — — 5121.0 3473.0 1433
146TDO9615AA1254 14.6250 19.7500 6.1250 4.2500 7.81 0.25 0.06 16.60 19.00 — — — S 1.33 680 576800 381000 208
371.475 501.650 155.575 107.950 198.4 6.4 1.5 421.6 482.6 — — — 2566.0 1695.0 94.3
150TDO618 15.0000 20.0000 5.5000 3.5000 8.70 0.25 0.06 16.66 19.28 — — — B 1.10 670 466000 302800 151
381.000 508.000 139.700 88.900 221.0 6.4 1.5 423.2 489.7 — — — 2073.0 1347.0 68
150TDOC641CA957 15.0000 21.5000 8.7500 7.0000 8.20 0.25 0.06 17.34 20.47 1.37 1.12 0.46 P 1.76 650 1262200 859200 364
381.000 546.100 222.250 177.800 208.3 6.4 1.5 440.4 519.9 34.8 28.4 11.7 5615.0 3822.0 165
150TDO663EA957 15.0000 23.2500 9.6250 7.6250 9.17 0.25 0.06 18.81 22.25 — — — P 1.69 600 1492000 1013600 553
381.000 590.550 244.475 193.675 232.9 6.4 1.5 477.8 565.2 — — — 6637.0 4509.0 250.8
151TDOC641BA1525 15.1250 21.5000 8.7500 7.0000 8.20 0.25 0.06 17.34 20.47 1.37 1.12 .47 S 1.76 650 1154000 803400 360
384.175 546.100 222.250 177.800 208.3 6.4 1.5 440.4 519.9 34.8 28.4 11.7 5133.0 3574.0 163
160TDO653EH952 16.0000 21.2500 5.620 4.0000 8.52 0.25 0.06 17.78 20.66 — — — B 1.26 630 608000 397800 188
406.400 539.750 142.875 101.600 216.4 6.4 1.5 451.6 524.8 — — — 2705.0 1770.0 85.3
160TDO675 16.0000 23.9970 7.0000 5.2500 8.02 0.31 0.06 19.19 22.78 — — — B 1.69 580 927000 620400 389
406.400 609.524 177.800 133.350 203.7 7.9 1.5 487.4 578.6 — — — 4124.0 2760.0 176
161TDO9660AC1676 16.1250 21.5000 7.3125 5.8120 8.63 0.30 0.08 18.06 20.78 — — — S 1.40 630 949000 640000 242
409.575 546.100 185.737 147.625 219.2 7.6 2 458.7 527.8 — — — 4221.0 2847.0 110
161TDO662BO130 16.1875 24.0000 7.3750 4.8750 8.15 0.27 0.06 18.50 22.59 — — — B 1.59 590 854000 562800 377
411.162 609.600 187.325 123.825 207.0 6.9 1.5 469.9 573.8 — — — 3799.0 2503.0 171
163TDOC663BA957 16.3750 23.2500 9.6250 7.6250 9.17 0.30 0.08 18.81 22.25 1.37 1.12 0.56 P 1.69 600 1322000 926000 460
415.925 590.550 244.475 193.675 232.9 7.6 2 477.8 565.2 34.8 28.4 14.2 5881.0 4119.0 209
163TDOC663BA1254 16.3750 23.2500 9.6250 7.6250 9.17 0.25 0.06 18.81 22.25 1.37 1.12 0.56 S 1.69 600 1408000 979000 460
415.925 590.550 244.475 193.625 232.9 6.4 1.5 477.8 565.2 34.8 28.4 14.2 6263.0 4355.0 209
165TDO664CA712 16.5000 29.0000 15.0000 12.0000 12.67 0.50 0.13 20.44 27.44 — — — P 1.59 520 2937800 2027700 1134
419.100 736.600 381.000 304.800 321.8 12.7 3.3 519.2 697.0 — — — 13068.0 9020.0 514
170TDO668BC776 17.0000 22.5000 6.1250 4.3750 11.56 0.13 0.06 19.13 21.94 — — — B 0.89 600 706000 463200 226
431.800 571.500 155.515 111.125 293.6 3.3 1.5 485.9 557.3 — — — 3140.0 2060.0 103
(2)
* B = Machined Bronze; S = Stamped Steel; P = Pin Thrust factor K equals Radial Load Rating ÷ Thrust Load Rating. See page E58 in the
(1) Engineering section for additional information.
Maximum shaft or housing radius which bearing corners will clear.
(3)
Oil bath only; grease = oil
2
350
176TDO680AC1075 17.6250 25.0000 10.1250 8.1250 9.78 0.25 0.06 20.19 24.00 — — — P 1.68 550 1728000 1177200 554
447.675 635.000 257.175 206.375 248.4 6.4 1.5 512.8 609.6 — — — 7687.0 5236.0 251.3
180TDO9684AO1249 18.0000 23.5000 6.5000 4.7500 8.77 0.38 0.06 20.00 22.44 1.37 1.25 0.44 S 1.45 570 798400 521000 248
457.200 596.900 165.100 120.650 222.8 9.7 1.5 508.0 570.0 34.8 31.8 11.2 3551.0 2318.0 112.5
180TDO683 18.0000 29.2500 17.5000 15.1250 13.26 0.50 0.13 21.88 27.72 — — — P 2.33 500 3790000 2711400 1700
457.200 742.950 444.500 384.175 336.8 12.7 3.3 555.8 704.1 — — — 16859.0 12061.0 771
188TDOC695CA957 18.8750 26.7500 10.8750 8.7500 10.47 0.25 0.06 21.84 25.84 1.37 1.12 0.43 P 1.69 510 2053400 1396200 688
479.425 679.450 276.225 222.250 265.9 6.4 1.5 554.7 656.3 34.8 28.4 10.9 9134.0 6211.0 312
188TDO695DB1322 18.8750 26.7500 10.8750 8.7500 10.47 0.25 0.06 21.84 25.84 — — — P 1.69 510 2053400 1396200 688
479.425 679.400 276.225 222.250 265.9 6.4 1.5 554.7 656.3 — — — 9134.0 6211.0 312
188TDOC695CA1254 18.8750 26.7500 10.8750 8.7500 10.47 0.25 0.06 21.84 25.84 1.37 1.12 0.43 S 1.69 510 1936000 1336000 641
479.425 679.450 276.225 222.250 265.9 6.4 1.5 554.7 656.3 34.8 28.4 10.9 8612.0 5943.0 290.8
190TDOC698CA1254 19.0000 24.2500 7.2500 5.7500 8.23 0.25 0.06 20.75 23.44 1.5 1.25 0.31 S 1.76 550 1108000 724000 262
482.600 615.950 184.150 146.050 209.0 6.4 1.5 527.1 595.4 38.1 31.8 7.9 4929.0 3221.0 118.8
192TDOC9711AA1254 19.2500
488.950
24.9950
634.873
7.1250
180.975
5.3750
136.525
10.35
262.9
0.25
6.4
0.06
1.5
21.44
544.6
24.22
615.2
1.37
34.8
1.12
28.4
0.56
14.2
S 1.24 530 976000
4341.0
637800
2837.0
303
137 2
192TDOC711BA957 19.2500 24.9950 7.1250 5.3750 9.89 0.25 0.06 21.36 24.25 1.37 1.12 0.56 P 1.32 530 1120000 725600 308
488.950 634.873 180.975 136.525 251.2 6.4 1.5 542.5 615.9 34.8 28.4 14.2 4982.0 3228.0 139.7
192TDO710 19.2500 26.0000 8.1250 6.2500 8.70 0.25 0.06 21.38 24.97 — — — B 1.82 520 1200000 800600 422
488.950 660.400 206.375 158.750 221.0 6.4 1.5 543.1 634.2 — — — 5338.0 3561.0 191.4
192TDOC712MA1736 19.2530 24.9950 7.0000 5.6250 8.75 0.25 0.06 21.47 24.22 1.37 1.12 .53 P 1.62 530 1106000 698600 310
489.026 634.873 177.800 142.875 222.2 6.4 1.5 545.3 615.2 34.8 28.4 13.5 4920.0 3108.0 141
200TDO718 20.0000 33.0000 12.0000 8.7500 13.78 0.38 0.13 24.16 30.97 — — — B 1.29 450 2080000 1473400 1397
508.000 838.200 304.800 222.250 355.0 9.7 3.3 613.7 786.6 — — — 9252.0 6554.0 634
211TDO740AA957 21.1250 29.9950 12.2500 9.7500 11.63 0.25 0.06 24.06 29.00 — — — P 1.67 460 2618000 1789600 977
536.575 761.873 311.150 247.650 295.4 6.4 1.5 611.1 736.6 — — — 11645.0 7961.0 443.2
215TDOC747AB1254 21.5000 29.0000 6.5000 4.5000 11.40 0.25 0.13 24.31 27.84 1.25 1.00 0.53 S 1.19 460 1022000 642000 420
546.100 736.600 165.100 114.300 289.6 6.4 3.3 617.5 707.1 31.8 25.4 13.5 4546.0 2856.0 191
220TDO745DA957 22.0000 29.0000 8.8750 7.0000 10.08 0.25 0.06 24.38 27.97 — — — P 1.71 460 1780000 1158400 543
558.800 736.600 225.425 177.800 256.0 6.4 1.5 619.3 710.4 — — — 7918.0 5153.0 246
220TDOC746 22.0000 29.0000 7.3750 5.4375 9.15 0.25 0.06 24.19 27.75 1.5 1.25 0.59 B 1.71 460 1224000 794400 477
558.800 736.600 187.325 138.112 232.4 6.4 1.5 614.4 704.8 38.1 31.8 15 5445.0 3534.0 203
220TDOC746OA180 22.0000 29.2500 7.3750 5.4375 9.15 0.25 0.06 24.19 27.75 1.5 1.25 0.31 B 1.71 460 1224000 794400 447
558.800 742.950 187.325 138.112 232.4 6.4 1.5 614.4 704.8 38.1 31.8 7.87 5445.0 3534.0 202.8
220TDOC747DB1254 22.0000 29.0000 6.5000 4.5000 11.40 0.25 0.13 24.31 27.84 1.25 1.00 0.53 S 1.19 460 1022000 642000 389
558.800 736.600 165.100 114.300 289.6 6.4 3.3 617.5 707.1 31.8 25.4 13.5 4546.0 2856.0 176
225TDO756AA957 22.5000 32.0000 13.1250 10.3750 12.30 0.27 0.06 25.78 30.75 — — — P 1.69 430 2940000 2002400 1197
571.500 812.800 333.375 263.525 312.4 6.9 1.5 654.8 781.1 — — — 13078.0 8907.0 543
230TDOC758DA1813 23.0000 35.5000 11.7500 8.4375 8.76 0.31 0.06 26.78 33.38 1.50 1.25 .43 P 1.65 400 2564000 1751800 1455
584.200 901.700 298.450 214.313 222.5 7.9 1.5 680.2 847.9 38.1 31.8 10.9 11405.0 7792.0 660
237TDO776GB1159 23.7380 31.0000 8.1250 6.2500 13.50 0.25 0.06 26.53 30.25 — — — P 1.12 430 1580000 994600 558
602.945 787.400 206.375 158.750 342.9 6.40 1.5 673.9 768.3 — — — 7028.0 4424.0 253.1
240TDOC776CA957 24.0000 31.0000 8.1250 6.2500 13.51 0.25 0.06 26.53 30.25 1.37 1.12 0.62 P 1.12 430 1580000 994600 535
609.600 787.400 206.375 158.750 343.2 6.4 1.5 673.9 768.3 34.8 28.4 15.7 7028.0 4424.0 243
270TDOC812AA957 27.0000 34.5000 7.8750 6.0000 12.51 0.25 0.06 29.53 33.34 1.5 1.25 0.44 P 1.37 380 1714000 1055600 623
685.800 876.300 200.025 152.400 317.8 6.4 1.5 750.1 846.8 38.1 31.8 11.18 7624.0 4696.0 282.6
285TDO815HE1606 28.5000 36.0000 7.3750 5.5000 11.56 0.25 0.16 30.78 34.78 — — — S 1.55 370 1388400 832200 566
723.900 914.400 187.325 139.700 293.6 6.4 4.1 781.8 883.4 — — — 6176.0 3702.0 257
300TDO830 30.0000 38.0000 7.3750 5.2500 13.60 0.25 0.06 32.94 36.25 — — — B 1.32 350 1348000 808000 622
762.000 965.200 187.325 133.350 345.4 6.4 1.5 836.7 920.8 — — — 5996.0 3594.0 282
(2)
* B = Machined Bronze; S = Stamped Steel; P = Pin Thrust factor K equals Radial Load Rating ÷ Thrust Load Rating. See page E58 in the
(1)
Maximum shaft or housing radius which bearing corners will clear. Engineering section for additional information.
(3)
Oil bath only; grease = oil
2
351
50 TVB 190
TVB Thrust Ball Bearings
TVL Angular Contact Thrust Ball Bearings
DTVL Angular Contact Thrust Ball Bearings –
upper and lower complement of balls
TP Thrust Cylindrical Roller Bearings
TPS Thrust Cylindrical Roller Bearings –
two bottom washers
TTHD Thrust Tapered Roller Bearings
352
Thrust
Bearings
Page
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 354
353
INTRODUCTION
Four basic designs of thrust rolling bearings are available from Timken: ball, spherical roller, cylindrical
roller and tapered roller. Dimensional data for all styles are presented in order by bore size.
Engineering data such as tolerances, shaft and housing fits, and life and load rating calculations are
found in the Engineering section of this catalog.
Bearing Types
THRUST BALL BEARINGS
Timken Torrington thrust ball bearings provide optimum performance in high speed installations,
particularly where loads are generally lighter.
Two basic types of thrust ball bearings are available from Torrington, axial (TVB), and angular contact
(TVL). Torrington also offers a DTVL type, with both an upper and lower complement of angular contact
balls and three race elements.
Torrington standard tolerances for thrust ball bearings (both types) are equivalent to ABEC-1 where
applicable, but higher precision tolerances are available. Consult a Timken sales engineer about such
installations.
TVB
Timken Torrington TVB thrust bearings are separable, and consist of two hardened and ground steel
washers. The precision ground and lapped balls run in a grooved raceway, separated by a bronze cage.
Other materials may be specified for the cage, depending on the application.
TVB ball thrust bearings provide axial rigidity, but are not recommended if radial loading is expected.
TVB bearings are exceptionally easy to mount, with the rotating washer usually shaft mounted. The
stationary washer should be housed with an outside diameter clearance that allows the bearing to
assume a normal operating position.
Most TVB bearings made by Torrington include washers of the same bore and outside diameter. TVB
Housings should therefore be designed to clear the O.D. of rotating washers, with shafts stepped to
clear the bore of stationary washers.
TVL
Timken Torrington TVL angular-contact thrust ball bearings provide exceptionally low friction, cool
running and quiet operation when operated at high speeds. They are also less sensitive to misalignment.
While TVL bearings have been designed exclusively for thrust loads, the angular contact design will
accommodate some radial loading. Consult a Timken sales engineer for assistance in determining the
limits of such loading for specific applications.
The hardened and ground steel races of TVL bearings enclose a complement of precision ground
and lapped steel balls, separated by a bronze cage (other material may be specified as required ).
Although TVL is not strictly an annular ball bearing, the larger ring is identified as the outer ring; the
TVL
smaller as the inner. The inner ring is usually the rotating element and is shaft mounted. The outer ring,
normally stationary, should be mounted with an outside diameter clearance that allows the bearing to
assume a normal operating position.If combined loads are expected, the outer ring must be radially
located in the housing.
TVL bearings should always be operated under thrust loading, as will happen in the usual applications
for thrust ball bearings (oil field rotary tables or machine tool indexing tables). If a constant thrust load is
not normally present, it should be imposed by springs or other devices.
DTVL
The DTVL has an upper and lower complement of angular contact balls and three race elements. This
series is capable of carrying thrust in one direction comparable to the TVL series and lighter thrust in the
opposite direction.
DTVL
355
Type TVB H
d
Type TVB thrust ball bearings are designed for optimum performance r
in high speed installations. They provide axial rigidity, but are not
recommended if radial loading is expected. Type TVB is exceptionally
easy to mount, with the rotating washer usually shaft-mounted. T
r
E
80TVB347 8.0000 11.6250 3.0000 10.75 8.75 0.25 34.5 382000 113000
203.200 295.275 76.200 273.1 222.2 6.4 15.6 1700.0 504.0
85TVB391 8.5000 11.5000 2.2500 10.84 9.16 0.12 22.2 289000 78400
215.900 292.100 57.150 275.4 232.6 3.2 10.1 1280.0 349.0
90TVB393 9.0000 12.0000 2.2500 11.34 9.66 0.12 21.3 365000 99400
228.600 304.800 57.150 288.1 245.3 3.2 9.7 1620.0 442.0
95TVB431 9.5000 12.5000 2.2500 11.84 10.16 0.12 24.4 311000 82400
241.300 317.500 57.150 300.8 258 3.2 11.1 1380.0 366.0
100TVB433 10.0000 13.5000 2.2500 12.78 10.72 0.25 29.5 351000 96800
254.000 342.900 57.150 324.6 272.3 6.4 13.4 1560.0 431.0
105TVB471 10.5000 14.0000 2.2500 13.28 11.22 0.25 30.7 407000 107000
266.700 355.600 57.150 337.3 285 6.4 13.9 1810.0 476.0
110TVB472 11.0000 14.5000 2.2500 13.78 11.72 0.25 31.9 421000 109000
279.400 368.300 57.150 350 297.7 6.4 14.5 1870.0 486.0
120TVB511 12.0000 15.5000 2.2500 14.78 12.72 0.25 34.5 450000 114000
304.800 393.700 57.150 375.4 323.1 6.4 15.6 2000.0 507.0
130TVB551 13.0000 16.5000 2.5000 15.78 13.72 0.25 39.6 555000 141000
330.200 419.100 63.500 400.8 348.5 6.4 18 2470.0 627.0
140TVB581 14.0000 17.5000 2.5000 16.78 14.72 0.25 42.3 590000 146000
355.600 444.500 63.500 426.2 373.9 6.4 19.2 2620.0 649.0
150TVB610 15.0000 19.0000 2.5000 18.12 15.89 0.25 54.7 590000 146000
381.000 482.600 63.500 460.4 403.6 6.4 24.8 2620.0 649.0
160TVB640 16.0000 20.0000 2.5000 19.00 17.00 0.25 57.9 624000 152000
406.400 508.000 63.500 482.6 431.8 6.4 26.3 2780.0 677.0
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
356
D1
Angular Contact Thrust D2
Type DTVL angular contact thrust ball bearings are capable of carrying
thrust in one direction, plus a lighter thrust in the opposite direction.
T1
They are designed with an upper and lower complement of angular T
contact balls and three race elements.
E1
E
D
(2)
DIMENSIONS – LOAD RATINGS
Bearing Bore Upper Race Lower Race Load Rating
Number
Upper Lower O.D. Height O.D. Shoulder O.D. Shoulder Weight Upper Lower
(1)
d d1 D T D1 D2 E E1 T1 Fillet Static Dynamic Static
Radius Load Load Load
r Rating Rating Rating
(max.) Coa Ct Coa
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
lbs
kg.
lbs
kN
lbs
kN
lbs
kN 2
200DTVL722 20.0000 20.0000 29.2500 6.7500 26.750 24.250 23.125 22.00 5.000 0.25 391.0 1200000 351000 519000
508.000 508.000 742.95 171.45 679.45 616 587.38 558.8 127.000 6.4 177.3 5340.0 1560.0 2310.0
202DTVL723 20.2500 20.1250 27.7500 6.2500 24.500 24.000 23.250 22.44 4.50 0.25 294.0 1220000 332000 844000
514.350 511.175 704.85 158.75 622.30 609.60 590.55 569.9 114.3 6.4 133.3 5430.0 1480.0 3750.0
235DTVL724 23.5000 23.2500 33.0000 7.2500 30.500 28.000 26.625 25.50 5.50 0.25 543.0 1700000 443000 822000
596.900 590.550 838.2 184.15 774.70 711.20 676.28 647.7 139.7 6.4 246.2 7560.0 1970.0 3660.0
245DTVL725 24.5000 24.3750 32.1250 6.2500 28.750 28.250 27.500 26.68 4.50 0.25 347.0 1440000 369000 995000
622.300 619.125 815.975 158.75 730.25 717.60 698.50 677.9 114.3 6.4 157.4 6410.0 1640.0 4430.0
266DTVL726 26.6250 26.5000 36.0000 7.6250 34.500 31.000 31.00 29.25 5.625 0.25 654.0 1910000 558000 1420000
676.275 673.100 914.4 193.675 876.30 787.40 787.4 743 142.88 6.4 296.6 8510.0 2480.0 6320.0
305DTVL727 30.5000 30.2500 38.2500 6.2500 34.875 34.380 33.38 32.56 4.50 0.25 429.0 1750000 423000 1210000
774.700 768.350 971.55 158.75 885.82 873.10 847.72 827.1 114.3 6.4 194.6 7780.0 1880.0 5390.0
312DTVL728 31.2500 31.0000 39.6250 7.8750 39.375 35.250 35.50 34.00 5.50 0.25 717.0 2300000 557000 1620000
793.750 787.400 1006.475 200.025 1000.12 895.40 901.7 863.6 139.7 6.4 325.2 10200.0 2480.0 7200.0
405DTVL729 40.5000 40.3750 48.5000 6.2500 45.000 44.500 43.50 42.69 4.50 0.25 561.0 2280000 504000 1470000
1028.700 1025.525 1231.9 158.75 1143 1130.30 1104.9 1084.3 114.3 6.4 254.4 10200.0 2240.0 6540.0
412DTVL730 41.2500 41.0000 49.6250 7.8750 49.375 45.250 45.50 44.00 5.50 0.25 920.0 2760000 625000 1850000
1047.750 1041.400 1260.475 200.025 1254.12 1149.40 1155.7 1117.6 139.7 6.4 417.2 12300.0 2780.0 8230.0
541DTVL731 54.1250 54.0000 62.8750 9.7500 60.500 58.310 58.625 57.00 6.625 0.25 1443.0 3980000 804000 2500000
1374.775 1371.600 1597.025 247.65 1536.70 1481.10 1489.08 1447.8 168.28 6.4 654.4 17700.0 3580.0 11100.0
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
(2)
See Engineering section page E59 for application of Equivalent Thrust Load Factors: X = 0.76, Y = 1.00, T (min) = 1.56.
R []T
R
is Thrust Load ÷ Radial Load
357
Angular Contact D1
H
Thrust Ball Bearings
d
Type TVL r
Type TVL angular contact thrust ball bearings provide exceptionally low
friction, cool running and quiet operation when run at high speeds.
Although designed exclusively for thrust loads, Type TVL will
T
accommodate some radial loading.
r
d1
(2)
DIMENSIONS – LOAD RATINGS
Washers Shoulder Diam. Dowel Pin (one per Washer) Load Rating
(1)
Bearing Bore O.D. Height Small Large Shaft Housing Pin Hole Location Fillet Weight Static Dynamic
Number d D T Diameter Bore H E Diameter from Centerline Radius Load Load
O.D I.D Small Large r Rating Rating
D1 d1 Bore Bore
(min.) (max.) Washer Washer (max.) Coa Ct
in. in. in. in. in. in. in. in. in. in. in. lbs lbs lbs
mm mm mm mm mm mm mm mm mm mm mm kg. kN kN
90TVL710 9.0000 11.6250 1.5000 10.938 9.688 10.31 10.31 — — — 0.12 13.6 143000 36900
228.600 295.275 38.100 277.81 246.06 261.9 261.9 — — — 3.2 6.2 636.0 164.0
120TVL700 12.0000 16.0000 2.2500 14.500 13.500 14.00 14.00 0.375 6.50 7.50 0.12 40.8 359000 96400
304.800 406.400 57.150 368.30 342.90 355.6 355.6 9.52 165.1 190.5 3.2 18.5 1600.0 429.0
150TVL701 15.0000 20.5000 3.3120 19.000 16.500 17.75 17.75 0.500 8.12 9.62 0.19 110.7 606000 162000
381.000 520.700 84.125 482.60 419.10 450.8 450.8 12.70 206.4 244.5 4.8 50.2 2700.0 721.0
170TVL500 17.0000 25.0000 3.5000 22.250 19.250 21.00 21.00 0.500 9.25 11.75 0.31 197.5 986000 254000
431.800 635.000 88.900 565.15 488.95 533.4 533.4 12.70 235 298.4 7.9 89.6 4390.0 1130.0
180TVL605 18.0000 24.6250 3.6250 21.625 20.000 21.31 21.31 0.625 9.75 11.25 0.12 172.9 1076000 288000
457.200 625.475 92.075 549.28 508 541.3 541.3 15.88 247.6 285.8 3.2 78.4 4790.0 1280.0
195TVL470 19.5000 23.0000 2.2500 22.500 20.000 21.25 21.25 0.375 10.19 11.06 0.12 62.7 585000 134000
495.300 584.200 57.150 571.50 508 539.8 539.8 9.52 258.8 281 3.2 28.4 2600.0 596.0
200TVL850 20.0000 27.7500 4.6250 24.750 22.250 23.88 23.88 0.625 10.88 13.00 0.25 280.7 1160000 303000
508.000 704.850 117.475 628.68 565.15 606.4 606.4 15.88 276.2 330.2 6.4 127.3 5160.0 1350.0
201TVL615 20.1250 24.7500 2.6250 23.250 21.625 22.44 22.44 0.500 10.56 11.81 0.12 92.3 746000 177000
511.175 628.650 66.675 590.55 549.28 569.9 569.9 12.70 268.3 300 3.2 41.9 3320.0 787.0
202TVL620 20.5000 27.7500 4.5000 24.500 22.500 24.00 24.00 0.812 11.00 12.88 0.25 269.7 1330000 351000
514.350 704.850 114.300 622.30 571.50 609.6 609.6 20.64 279.4 327 6.4 122.3 5910.0 1560.0
227TVL302 22.7500 30.5000 4.6250 27.750 24.500 26.62 26.62 0.812 12.25 14.38 0.25 330.2 1490000 379000
577.850 774.700 117.475 704.85 622.30 676.3 676.3 20.64 311.2 365.1 6.4 149.8 6620.0 1690.0
233TVL303 23.3750 31.1250 4.6250 28.375 25.625 27.25 27.25 0.875 12.62 14.56 0.25 332.2 1540000 388000
593.725 790.575 117.475 720.72 650.88 692.2 692.2 22.22 320.7 369.9 6.4 150.7 6850.0 1730.0
238TVL304 23.8750 33.3750 5.2500 29.125 27.125 28.62 28.62 0.875 12.88 15.62 0.25 468.7 1910000 494000
606.425 847.725 133.350 739.78 688.98 727.1 727.1 22.22 327 396.9 6.4 212.6 8510.0 2200.0
245TVL716 24.5000 30.2500 3.2500 28.875 26.790 27.38 27.38 0.500 12.75 14.62 0.12 168.0 861000 194000
622.300 768.350 82.550 733.42 680.47 695.3 695.3 12.70 323.8 371.5 3.2 76.2 3830.0 863.0
245TVL612 24.5000 32.7500 4.6250 29.250 26.750 28.62 28.62 0.625 13.00 15.62 0.25 362.7 1590000 397000
622.300 831.850 117.475 742.95 679.45 727.1 727.1 15.88 330.2 396.9 6.4 164.5 7070.0 1770.0
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
(2)
See Engineering section page E59 for application of Equivalent Thrust Load Factors: X = 0.76, Y = 1.00, T (min) = 1.56.
R []
T
R
is Thrust Load ÷ Radial Load
358
Angular Contact
Thrust Ball Bearings
Type TVL
(2)
DIMENSIONS – LOAD RATINGS
Washers Shoulder Diam. Dowel Pin (one per Washer) Load Rating
(1)
Bearing Bore O.D. Height Small Large Shaft Housing Pin Hole Location Fillet Weight Static Dynamic
Number d D T Diameter Bore H E Diameter from Centerline Radius Load Load
O.D
D1
I.D
d1
(min.) (max.)
Small
Bore
Large
Bore
Washer Washer
r
(max.)
Rating
Coa
Rating
Ct
2
in. in. in. in. in. in. in. in. in. in. in. lbs lbs lbs
mm mm mm mm mm mm mm mm mm mm mm kg. kN kN
252TVL505 25.2500 31.2500 3.5000 29.375 27.875 28.25 28.25 0.500 13.50 14.81 0.25 197.0 1220000 293000
641.350 793.750 88.900 746.12 708.02 717.6 717.6 12.70 342.9 376.2 6.4 89.3 5430.0 1300.0
260TVL635 26.0000 35.2500 5.2500 31.125 28.625 30.62 30.62 0.812 14.00 16.62 0.25 500.4 2140000 533000
660.400 895.350 133.350 790.58 727.08 777.9 777.9 20.64 355.6 422.3 6.4 226.9 9520.0 2370.0
302TVL510 30.2500 36.2500 3.5000 34.375 32.875 33.25 33.25 0.500 16.06 17.31 0.25 231.9 1430000 325000
768.350 920.750 88.900 873.12 835.02 844.6 844.6 12.70 408 439.7 6.4 105.2 6360.0 1450.0
302TVL624 30.2500 39.6250 5.5000 35.500 33.000 34.94 34.94 0.875 16.12 18.75 0.25 597.8 2370000 570000
768.350 1006.475 139.700 901.7 838.2 887.4 887.4 22.22 409.6 476.2 6.4 271.1 10600.0 2540.0
303TVL706 30.3750 35.3750 2.5000 33.875 31.875 32.88 32.88 0.500 15.88 17.00 0.25 128.0 877000 175000
771.525 898.525 63.500 860.42 809.62 835 835 12.70 403.2 431.8 6.4 58 3900.0 7788.0
309TVL707 30.9375 37.5000 3.7500 34.750 33.750 34.25 34.25 0.625 16.38 17.88 0.25 260.0 952000 248000
785.812 952.500 95.250 882.65 857.25 870 870 15.88 415.9 454 6.4 117.9 4230.0 1100.0
310TVL625 31.0000 40.3750 5.5000 36.125 35.188 35.69 35.69 0.875 16.62 19.12 0.25 581.0 2450000 582000
787.400 1025.525 139.700 917.58 893.76 906.5 906.5 22.22 422.3 485.8 6.4 263.5 10900.0 2590.0
317TVL307 31.7500 40.3750 5.0000 36.750 34.375 36.00 36.00 0.875 16.81 18.75 0.25 530.6 2450000 582000
806.450 1025.525 127.000 933.45 873.12 914.4 914.4 22.22 427 476.2 6.4 240.6 10900.0 2590.0
402TVL717 40.2500 46.5000 3.5000 44.625 42.125 43.38 43.38 0.750 20.88 22.50 0.25 326.0 1840000 384000
1022.350 1181.100 88.900 1133.48 1069.98 1101.7 1101.7 19.05 530.2 571.5 6.4 147.8 8180.0 1710.0
410TVL718 41.0000 49.6250 5.0000 46.812 43.812 45.31 45.31 0.750 21.44 23.88 0.25 681.0 3140000 687000
1041.400 1260.475 127.000 1189.04 1112.84 1150.9 1150.9 19.05 544.5 606.4 6.4 308.8 14000.0 3060.0
420TVL721 42.0000 50.6250 5.0000 47.812 44.812 46.31 46.31 0.875 22.06 24.25 0.25 695.0 3140000 687000
1066.800 1285.875 127.000 1214.44 1138.24 1176.3 1176.3 22.22 560.4 616 6.4 315.2 14000.0 3060.0
530TVL719 53.0000 59.7500 4.1250 57.375 55.375 56.38 56.38 0.875 27.38 28.88 0.25 507.0 2040000 412000
1346.200 1517.650 104.775 1457.32 1406.52 1431.9 1431.9 22.22 695.3 733.4 6.4 229.99 9080.0 1830.0
540TVL720 54.0000 63.7500 5.5000 60.375 57.375 58.88 58.88 0.875 28.12 30.75 0.25 1059.0 4060000 815000
1371.600 1619.250 139.700 1533.52 1457.32 1495.4 1495.4 22.22 714.4 781 6.4 480.3 18000.0 3630.0
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
(2)
See Engineering section page E59 for application of Equivalent Thrust Load Factors: X = 0.76, Y = 1.00, T (min) = 1.56.
R []T
R
is Thrust Load ÷ Radial Load
359
Thrust Spherical
Roller Bearings D1
S H
Type TSR d
Type TSR thrust spherical roller bearing design achieves a high thrust r
capacity with low friction and continuous roller alignment. Spherically
contoured rollers, arranged in steep angular position, not only
T2
accomodate high thrust loads but support moderate radial loads as T T1
well. The low friction of this bearing results from a combination of T3
bearing geometry and manufacturing technology.
r
d1
in. in. in. in. in. in. in. in. in. in. in. lbs lbs lbs
mm mm mm mm mm mm mm mm mm mm mm kg. kN kN rpm
29422 4.3307 9.0551 2.8740 6.378 6.496 8.661 2.717 1.024 1.378 2.717 0.10 33.4 260000 176000 1500 30
110 230 73 162 165 220 69 26 35 69 2.5 15.2 1150.0 800.0
29424 4.7244 9.8425 3.0709 6.850 7.087 9.291 2.913 1.142 1.476 2.933 0.12 40.7 256000 216000 1350 40
120 250 78 174 180 236 74 29 37 74 3.0 18.5 1180.0 965.0
29326 5.1181 8.8583 2.2835 6.744 6.963 8.465 2.165 0.748 1.130 2.972 0.08 21.6 197000 132000 1700 22
130 225 58 171 177 215 55 19 29 75 2.0 9.8 880.0 600.0
29426 5.1181 10.6299 3.3464 7.375 7.677 10.039 3.189 1.220 1.669 3.189 0.12 52.6 388000 253000 1250 60
130 270 85 187 195 255 81 31 42 81 3.0 23.9 1730.0 1120.0
29330 5.9055 9.8425 2.3622 7.638 7.677 9.449 2.244 0.787 1.142 3.425 0.08 27.5 255000 150000 1550 30
150 250 60 194 195 240 57 20 29 87 2.0 12.5 1140.0 670.0
29430 5.9055 11.8110 3.5433 8.405 8.661 11.220 3.386 1.260 1.732 3.622 0.12 64.5 440000 275000 1100 80
150 300 90 213 220 285 86 32 44 92 3.0 29.3 1930.0 1220.0
29334 6.6929 11.0236 2.6378 8.504 8.661 10.630 2.520 0.906 1.280 3.780 0.10 36.3 340000 196000 1350 50
170 280 67 216 220 270 64 23 32 96 2.5 16.5 1500.0 880.0
29434 6.6929 13.3858 4.0551 9.567 9.646 12.756 3.898 1.457 1.968 4.094 0.16 93.5 600000 365000 950 140
170 340 103 243 245 324 99 37 50 104 4.0 42.4 2650.0 1630.0
29338EJ 7.4803 12.5984 3.0709 9.685 9.843 12.126 2.913 1.063 1.496 4.331 0.12 56.5 549000 333000 1150 80
190 320 78 246 250 308 74 27 38 110 3.0 25.6 2442.0 1481.0
29438EJ 7.4803 14.9606 4.5276 10.669 10.827 14.173 4.370 1.614 2.185 4.606 0.16 133.0 937000 558000 850 210
190 380 115 271 275 360 111 41 55 117 4.0 60.3 4168.0 2482.0
29340 7.8740 13.3858 3.3465 10.3937 10.4331 12.7953 3.4252 1.1417 1.5748 4.4882 .12 63 485000 278000 950 100
200 340 85 264 265 325 81 29 40 114 3.0 29 2157.0 1236.0
29440 7.8740 15.7480 4.8031 11.254 11.417 14.961 4.606 1.693 2.323 4.803 0.16 154.0 815000 480000 800 260
200 400 122 286 290 380 117 43 59 122 4.0 69.8 3625.0 2135.0
29344 8.6614 14.1732 3.3464 11.024 11.220 13.583 3.189 1.142 1.614 4.921 0.12 74.8 550000 300000 1000 120
220 360 85 280 285 345 81 29 41 125 3.0 33.9 2500.0 1340.0
29444 8.6614 16.5354 4.8031 12.106 12.205 15.748 4.606 1.693 2.323 5.236 0.20 163.0 865000 500000 750 300
220 420 122 307 310 400 117 43 59 133 5.1 73.9 3800.0 2200.0
29348 9.4488 14.9606 3.3464 11.811 11.811 14.370 3.189 1.142 1.614 5.315 0.12 92.4 600000 315000 950 140
240 380 85 300 300 365 81 29 41 135 3.0 41.9 2650.0 1400.0
29448EM 9.4488 17.3228 4.8031 12.4016 12.6772 15.1575 3.4252 1.8110 2.4016 5.5906 24 171 1098000 615000 750 350
240 440 122 315 322 385 87 46 61 142 6.1 78 4884.0 2736.0
29352 10.2362 16.5354 3.7402 12.953 12.992 15.945 3.583 1.260 1.791 5.827 0.16 113.0 750000 400000 850 230
260 420 95 329 330 405 91 32 45 148 4.0 51.2 3350.0 1800.0
(1) (2)
Maximum shaft or housing fillet radius which bearing corners will clear. Centrifugal force constant. See Engineering section page E59 for calculations using this factor.
360
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
in.
mm
lbs
kg.
lbs
kN
lbs
kN rpm
2
29452 10.2362 18.8976 5.1968 14.055 14.173 18.110 5.000 1.890 2.520 6.063 0.20 227.0 1120000 620000 650 500
260 480 132 357 360 460 127 48 64 154 5.1 103 4900.0 1800.0
29360 11.8110 18.8976 4.2913 14.921 14.961 18.110 4.134 1.457 1.988 6.614 0.16 169.0 930000 490000 700 350
300 480 109 379 380 460 105 37 50 168 4.0 76.6 4150.0 2160.0
29460 11.8110 21.2598 5.7086 15.827 16.142 20.276 5.512 2.047 2.776 6.890 0.20 301.0 1430000 765000 550 780
300 540 145 402 410 515 140 52 70 175 5.1 136 6400.0 3450.0
29364 12.5984 19.6850 4.2913 15.709 15.748 18.976 4.134 1.457 2.087 7.087 0.16 176.0 980000 500000 650 380
320 500 109 399 400 482 105 37 53 180 4.0 79.8 4300.0 2240.0
29468 13.3858 24.4094 6.6929 18.189 18.307 23.228 6.457 2.402 3.248 7.913 0.24 486.0 1900000 1020000 450 1350
340 620 170 462 465 590 164 61 82 201 6.1 220 8500.0 4500.0
29372 14.1732 22.0472 4.8031 17.638 17.717 21.260 4.606 1.614 2.343 7.953 0.16 249.0 1250000 620000 550 640
360 560 122 448 450 540 117 41 59 202 4.0 113 5600.0 2800.0
29476 14.9606 26.3780 6.8898 19.842 20.079 25.197 6.614 2.480 3.331 8.740 0.24 575.0 2040000 1060000 410 1700
380 670 175 504 510 640 168 63 85 220 6.1 261 9000.0 4750.0
29576 14.9606 32.2835 10.4330 22.441 22.756 30.709 10.078 3.927 5.062 9.488 0.36 1816.0 3900000 2120000 280 5550
380 820 265 570 578 780 226 100 128 241 9.1 824 17300.0 9500.0
29380 15.7480 24.4094 5.1968 19.449 19.685 23.465 5.000 1.732 2.520 8.858 0.20 363.0 1600000 780000 500 970
400 620 132 494 500 596 127 44 64 225 5.1 165 7100.0 3450.0
29284EM 16.5354 22.8346 3.7402 18.8583 19.6850 21.339 2.7559 1.6142 1.9685 8.9764 .20 154.0 1198000 590000 630 300
420 580 95 479 500 542 70 41 50 228 5.1 70 5329.0 2624.0
29388 17.3228 26.7717 5.7089 21.5748 22.1654 25.866 5.5118 1.9291 2.7165 9.6850 .20 397.0 1706000 820000 480 1400
440 680 145 548 563 657 140 49 69 246 5.1 180 7588.0 3647.0
29488 17.3228 30.7087 8.1102 23.150 23.425 29.331 7.835 2.913 3.917 10.118 0.28 906.0 2900000 1500000 320 3400
440 780 206 588 595 745 199 74 99 257 7.1 411 13200.0 6700.0
29392 18.1102 27.9528 5.9055 22.293 22.638 26.969 5.669 2.008 2.857 10.118 0.20 486.0 2100000 1000000 400 1700
460 710 150 566 575 685 144 51 72 257 5.1 220 9300.0 4400.0
29496EM 18.8976 33.4646 8.8189 24.6457 25.9055 30.315 6.2598 3.6614 4.3307 10.9843 .38 1212.0 5049000 2550000 290 4700
480 850 224 626 658 770 159 93 110 279 9.7 550 22458.0 11342.0
294/500 19.6850 34.2520 8.8189 26.024 26.378 32.677 8.504 3.189 4.213 11.417 0.28 1235.0 3600000 1800000 270 4800
500 870 224 661 670 830 216 81 107 290 7.1 560 16000.0 8000.0
293/530 20.8661 31.4961 6.2992 25.512 25.591 30.394 6.063 2.126 2.992 11.614 0.24 634.0 2450000 1140000 350 2500
530 800 160 648 650 772 154 54 76 295 6.1 288 11000.0 5100.0
293/600 23.6220 35.4331 7.0866 28.6220 28.7402 34.173 6.8110 2.4016 3.4252 13.1102 .20 1400.0 3770000 1713000 320 4200
600 900 180 727 730 868 173 61 87 333 5.1 635 16770.0 7619.0
294/630 24.8031 42.9134 11.0236 32.707 33.465 41.102 10.669 3.976 5.236 14.393 0.36 2580.0 5200000 2550000 250 12200
630 1090 280 831 850 1044 271 101 133 365 9.1 1170 23000.0 11400.0
(1) (2)
Maximum shaft or housing fillet radius which bearing corners will clear. Centrifugal force constant. See Engineering section page E59 for calculations using this factor.
361
D1
Thrust Cylindrical H
T1
d
Roller Bearings r
Type TP T
in. in. in. in. in. in. in. in. in. lbs lbs lbs
mm mm mm mm mm mm mm mm mm kg kN kN
20TP103 2.0000 6.0000 1.3750 0.375 5.938 2.062 5.56 2.44 0.06 8.1 183000 74500
50.800 152.400 34.925 9.52 150.81 52.39 141.3 61.9 1.6 3.7 814.0 331.0
20TP104 2.0000 7.0000 1.3750 0.375 6.938 2.062 6.44 2.56 0.06 11.3 227000 89500
50.800 177.800 34.925 9.52 176.21 52.39 163.5 65.1 1.6 5.1 1010.0 398.0
30TP106 3.0000 6.0000 1.3750 0.375 5.938 3.062 5.62 3.38 0.06 7.0 168000 76500
76.200 152.400 34.925 9.52 150.81 77.79 142.9 85.7 1.6 3.2 747.0 340.0
30TP107 3.0000 7.0000 1.3750 0.375 6.938 3.062 6.56 3.44 0.06 10.2 234000 93200
76.200 177.800 34.925 9.52 176.21 77.79 166.7 87.3 1.6 4.6 1040.0 414.0
30TP108 3.0000 8.0000 1.3750 0.375 7.938 3.062 7.44 3.56 0.06 13.9 311000 117000
76.200 203.200 34.925 9.52 201.61 77.79 188.9 90.5 1.6 6.3 1380.0 520.0
30TP109 3.0000 9.0000 1.3750 0.375 8.938 3.062 8.38 3.62 0.06 18.1 405000 143000
76.200 228.600 34.925 9.52 227.01 77.79 212.7 92.1 1.6 8.2 1800.0 636.0
35TP113 3.5000 5.2188 1.0000 0.281 5.156 3.562 4.88 3.84 0.06 3.0 85600 40400
88.900 132.558 25.400 7.14 130.97 90.49 123.8 97.6 1.6 1.4 381.0 180.0
40TP114 4.0000 7.0000 1.7500 0.500 6.938 4.062 6.62 4.38 0.06 11.0 231000 113000
101.600 177.800 44.450 12.7 176.21 103.19 168.3 111.1 1.6 5 1030.0 503.0
40TP115 4.0000 8.0000 1.7500 0.500 7.938 4.062 7.50 4.50 0.06 15.6 308000 132000
101.600 203.200 44.450 12.7 201.61 103.19 190.5 114.3 1.6 7.1 1370.0 589.0
40TP116 4.0000 9.0000 1.7500 0.500 8.938 4.062 8.44 4.56 0.06 21.0 397000 152000
101.600 228.600 44.450 12.7 227.01 103.19 214.3 115.9 1.6 9.5 1770.0 676.0
40TP117 4.0000 10.0000 1.7500 0.500 9.938 4.062 9.38 4.62 0.06 25.6 498000 202000
101.600 254 44.450 12.7 252.41 103.19 238.1 117.5 1.6 11.6 2220.0 896.0
50TP119 5.0000 8.0000 1.7500 0.500 7.938 5.062 7.50 5.50 0.06 13.1 288000 133000
127 203.200 44.450 12.7 201.61 128.59 190.5 139.7 1.6 5.9 1280.0 593.0
50TP120 5.0000 9.0000 1.7500 0.500 8.938 5.062 8.50 5.50 0.06 18.4 385000 161000
127 228.600 44.450 12.7 227.01 128.59 215.9 139.7 1.6 8.3 1710.0 716.0
50TP121 5.0000 10.0000 2.0000 0.562 9.938 5.062 9.44 5.56 0.12 27.4 491000 189000
127 254 50.800 14.29 252.41 128.59 239.7 141.3 3.2 12.4 2180.0 841.0
50TP122 5.0000 11.0000 2.0000 0.562 10.938 5.062 10.31 5.69 0.12 34.8 620000 224000
127 279.400 50.800 14.29 277.81 128.59 261.9 144.5 3.2 15.8 2760.0 996.0
50TP123 5.0000 12.0000 2.0000 0.562 11.938 5.062 11.38 5.75 0.12 42.8 789000 262000
127 304.800 50.800 14.29 303.21 128.59 288.9 146 3.2 19.4 3290.0 1170.0
60TP124 6.0000 9.0000 2.0000 0.562 8.938 6.062 8.56 6.44 0.12 16.8 317000 135000
152.400 228.600 50.800 14.29 227.01 153.99 217.5 163.5 3.2 7.6 1410.0 600.0
60TP125 6.0000 10.0000 2.0000 0.562 9.938 6.062 9.50 6.50 0.12 23.7 449000 190000
152.400 254 50.800 14.29 252.41 153.99 241.3 165.1 3.2 10.7 2000.0 845.0
60TP126 6.0000 11.0000 2.0000 0.562 10.938 6.062 10.44 6.56 0.12 31.4 608000 226000
152.400 279.400 50.800 14.29 277.81 153.99 265.1 166.7 3.2 14.2 2700.0 1000.0
60TP127 6.0000 12.0000 2.0000 0.562 11.938 6.062 11.31 6.69 0.12 39.4 725000 250000
152.400 304.800 50.800 14.29 303.31 153.99 287.3 169.9 3.2 17.7 3220.0 1110.0
70TP129 7.0000 10.0000 2.0000 0.562 9.906 7.094 9.56 7.44 0.12 20.2 365000 149000
177.800 254 50.800 14.29 251.62 180.18 242.9 188.9 3.2 9.2 1620.0 663.0
70TP130 7.0000 11.0000 2.0000 0.562 10.906 7.094 10.50 7.50 0.12 28.3 540000 209000
177.800 279.400 50.800 14.29 277.02 180.18 266.7 190.5 3.2 12.8 2400.0 930.0
70TP131 7.0000 12.0000 2.0000 0.562 11.906 7.094 11.38 7.62 0.12 37.0 695000 242000
177.800 304.800 50.800 14.29 302.42 180.18 288.9 193.7 3.2 16.8 3090.0 1080.0
70TP132 7.0000 14.0000 3.0000 0.812 13.906 7.094 13.19 7.81 0.25 80.1 1010000 394000
177.800 355.600 76.200 20.64 353.22 180.18 335 198.4 6.4 36.3 4490.0 1750.0
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
362
in. in. in. in. in. in. in. in. in. lbs lbs lbs
mm mm mm mm mm mm mm mm mm kg kN kN
80TP134 8.0000 12.0000 3.0000 0.812 11.906 8.094 11.50 8.50 0.25 45.1 599000 258000
203.2 304.8 76.2 20.64 302.42 205.58 292.1 215.9 6.4 20.5 2660.0 1150.0
80TP135 8.0000 14.0000 3.0000 0.812 13.906 8.094 13.25 8.75 0.25 72.8 950000 389000
203.2 355.6 76.2 20.64 353.22 205.58 336.6 222.2 6.4 33 4230.0 1730.0
80TP136 8.0000 16.0000 3.0000 0.812 15.906 8.094 15.06 8.94 0.25 98.1 1290000 520000
203.2 406.4 76.2 20.64 404.02 205.58 382.6 227.0 6.4 44.5 5740.0 2310.0
90TP139 9.0000 14.0000 3.0000 0.812 13.906 9.094 13.38 9.62 0.25 64.5 879000 328000
228.6 355.6 76.2 20.64 353.22 230.98 339.7 244.5 6.4 29.3 3910.0 1460.0
90TP140 9.0000 16.0000 3.0000 0.812 15.906 9.094 15.19 9.81 0.25 96.2 1250000 482000
228.6 406.4 76.2 20.64 404.02 230.98 385.8 249.2 6.4 43.6 5560.0 2140.0
100TP143 10.0000 16.0000 3.0000 0.812 15.906 10.094 15.25 10.75 0.25 86.6 1160000 394000
254 406.4 76.2 20.64 404.02 256.38 387.4 273.0 6.4 39.5 5160.0 1750.0
100TP144 10.0000 18.0000 3.7500 1.031 17.906 10.094 17.12 10.88 0.25 151.8 1620000 604000
254 457.2 95.25 26.19 454.82 256.38 435.0 276.2 6.4 68.8 7210.0 2690.0
100TP145 10.0000 20.0000 3.7500 1.031 19.906 10.094 18.94 11.06 0.25 202.2 2150000 825000
120TP151
254
12.0000
508
18.0000
95.25
3.7500
26.19
1.031
505.62
17.906
256.38
12.094
481.0
17.25
281.0
12.75
6.4
0.25
91.7
125.1
9560.0
1420000
3670.0
518000 2
304.8 457.2 95.25 26.19 454.82 307.18 438.2 323.8 6.4 56.7 6340.0 2300.0
120TP152 12.0000 20.0000 4.5000 1.250 19.906 12.094 19.06 12.94 0.25 230.5 1780000 743000
304.8 508 114.3 31.75 505.62 307.18 484.2 328.6 6.4 104.5 7900.0 3300.0
120TP153 12.0000 24.0000 4.5000 1.250 23.906 12.094 23.00 13.00 0.25 371.5 2900000 1050000
304.8 609.6 114.3 31.75 607.22 307.18 584.2 330.2 6.4 168.5 12900.0 4680.0
140TP158 14.0000 20.0000 3.7500 1.031 19.875 14.125 19.25 14.75 0.25 138.1 1620000 588000
355.6 508 95.25 26.19 504.82 358.78 489.0 374.6 6.4 62.6 7200.0 2610.0
140TP159 14.0000 22.0000 3.7500 1.031 21.875 14.125 21.06 14.94 0.25 197.5 2250000 802000
355.6 558.8 95.25 26.19 555.62 358.78 535.0 379.4 6.4 89.6 10000.0 3750.0
140TP160 14.0000 24.0000 3.7500 1.031 23.875 14.125 22.88 15.12 0.25 276.2 2840000 908000
355.6 609.6 95.25 26.19 606.4 358.78 581.0 384.2 6.4 125.3 12600.0 4040.0
160TP164 16.0000 22.0000 4.5000 1.250 21.875 16.125 21.25 16.75 0.25 189.4 1770000 695000
406.4 558.8 114.3 31.75 555.6 409.6 539.8 425.4 6.4 85.9 7860.0 3090.0
160TP165 16.0000 24.0000 4.5000 1.250 23.875 16.125 23.06 16.94 0.25 267.7 2510000 937000
406.4 609.6 114.3 31.75 606.4 409.6 585.8 430.2 6.4 121.4 11200.0 4170.0
160TP166 16.0000 26.0000 4.5000 1.250 25.875 16.125 24.94 17.06 0.25 372.1 3090000 1060000
406.4 660.4 114.3 31.75 657.2 409.6 633.4 433.4 6.4 168.8 13800.0 4710.0
180TP168 18.0000 26.0000 5.0000 1.375 25.875 18.125 25.00 19.00 0.25 328.1 2650000 919000
457.2 660.4 127 34.92 657.2 460.4 635 482.6 6.4 148.8 11800.0 4090.0
180TP169 18.0000 28.0000 5.0000 1.375 27.875 18.125 26.94 19.06 0.25 430.7 3480000 1230000
457.2 711.2 127 34.92 708.0 460.4 684.2 484.2 6.4 195.3 15500.0 5480.0
180TP170 18.0000 30.0000 5.5000 1.500 29.875 18.125 28.94 19.06 0.25 618.9 4430000 1540000
457.2 762 139.7 38.10 758.8 460.4 735.0 484.2 6.4 280.7 19700.0 6840.0
200TP171 20.0000 28.0000 5.5000 1.500 27.875 20.125 27.00 21.00 0.25 392.5 2940000 1060000
508 711.2 139.7 38.10 708.0 511.2 685.8 533.4 6.4 178 13100.0 4710.0
200TP172 20.0000 30.0000 5.5000 1.500 29.875 20.125 29.00 21.00 0.25 512.0 3930000 1430000
508 762 139.7 38.10 758.8 511.2 736.6 533.4 6.4 232.2 17500.0 6370.0
200TP173 20.0000 32.0000 6.0000 1.656 31.875 20.125 31.00 21.00 0.25 698.9 5050000 1700000
508 812.8 152.4 42.07 809.6 511.2 787.4 533.4 6.4 317 22400.0 7610.0
220TP174 22.0000 30.0000 5.5000 1.500 29.875 22.125 29.00 23.00 0.25 425.0 3200000 1140000
558.8 762 139.7 38.10 758.8 562 736.6 584.2 6.4 192.7 14200.0 5070.0
220TP175 22.0000 32.0000 5.5000 1.500 31.875 22.125 30.81 23.19 0.25 552.6 4270000 1480000
558.8 812.8 139.7 38.10 809.6 562.0 782.6 589.0 6.4 250.6 19000.0 6570.0
220TP176 22.0000 34.0000 6.0000 1.656 33.875 22.125 33.00 23.00 0.25 751.6 5500000 1840000
558.8 863.6 152.4 42.07 860.4 562.0 838.2 584.2 6.4 340.9 24500.0 8200.0
240TP177 24.0000 32.0000 5.5000 1.500 31.875 24.125 31.12 24.88 0.38 455.4 3600000 1270000
609.6 812.8 139.7 38.10 809.6 612.8 790.6 631.8 9.5 206.5 16000.0 5650.0
240TP178 24.0000 34.0000 5.5000 1.500 33.875 24.125 33.00 25.00 0.38 593.2 4610000 1550000
609.6 863.6 139.7 38.10 860.4 612.8 838.2 635.0 9.5 269 20500.0 6880.0
240TP179 24.0000 36.0000 6.0000 1.656 35.875 24.125 35.00 25.00 0.38 804.2 5670000 1900000
609.6 914.4 152.4 42.07 911.2 612.8 889.0 635.0 9.5 364.7 25200.0 8450.0
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
363
D1
The Type TPS thrust cylindrical roller bearing is similar to the type TP
except one washer is spherically ground to seat against an aligning C
washer, thus making it adaptable to initial misalignment.
It is not recommended for operating conditions where alignment is
constantly changing. r
d1
E
D
in. in. in. in. in. in. in. in. in. lbs lbs lbs
mm mm mm mm mm mm mm mm mm kg kN kN
20TPS103 2.0000 6.3120 1.8125 7.500 5.938 2.062 5.56 3.38 0.06 11.4 183000 74500
50.800 160.325 46.038 190.50 150.81 52.39 141.3 85.7 1.6 5.2 814.0 331.0
20TPS104 2.0000 7.3120 1.8125 9.500 6.938 2.062 6.44 4.25 0.06 15.7 227000 89500
50.800 185.725 46.038 241.30 176.21 52.39 163.5 108.0 1.6 7.12 1010.0 398.0
30TPS106 3.0000 6.3120 1.8125 6.000 5.938 3.062 5.62 4.00 0.06 9.9 168000 76500
76.200 160.325 46.038 152.40 150.81 77.79 142.9 101.6 1.6 4.5 747.0 340.0
30TPS107 3.0000 7.3120 1.8125 9.500 6.938 3.062 6.56 4.38 0.06 14.2 234000 93200
76.200 185.725 46.038 241.30 176.21 77.79 166.7 111.1 1.6 6.4 1040.0 414.0
30TPS108 3.0000 8.3120 1.8125 12.000 7.938 3.062 7.44 5.25 0.06 19.2 311000 117000
76.200 211.125 46.038 304.80 201.61 77.79 188.9 133.4 1.6 8.7 1380.0 520.0
35TPS113 3.5000 5.4688 1.3125 5.000 5.156 3.594 4.88 4.06 0.06 4.1 85600 40400
88.900 138.908 33.338 127.00 130.97 91.28 123.8 103.2 1.6 1.9 381.0 180.0
40TPS114 4.0000 7.3750 2.3125 6.375 6.938 4.094 6.62 5.00 0.06 15.4 231000 113000
101.600 187.327 58.738 161.93 176.21 103.98 168.3 127 1.6 7.0 1030.0 503.0
40TPS115 4.0000 8.3750 2.3125 8.500 7.938 4.094 7.50 5.25 0.06 22.1 308000 132000
101.600 212.725 58.738 215.90 201.61 103.98 190.5 133.4 1.6 10.0 1370.0 589.0
40TPS116 4.0000 9.3750 2.3125 10.000 8.938 4.094 8.44 5.88 0.06 29.5 397000 152000
101.600 238.125 58.738 254.00 227.01 103.98 214.3 149.2 1.6 13.4 1770.0 676.0
40TPS117 4.0000 10.5000 2.3125 14.000 9.938 4.094 9.38 6.50 0.06 37.7 498000 202000
101.600 266.7 58.738 355.60 252.41 103.98 238.1 165.1 1.6 17.1 2220.0 896.0
50TPS119 5.0000 8.5000 2.3125 7.375 7.938 5.125 7.50 6.00 0.06 18.5 288000 133000
127 215.9 58.738 187.33 201.61 130.18 190.5 152.4 1.6 8.4 1280.0 592.0
50TPS120 5.0000 9.5000 2.3125 10.500 8.938 5.125 8.50 6.12 0.06 26.1 385000 161000
127 241.3 58.738 266.70 227.01 130.18 215.9 155.6 1.6 11.8 1710.0 716.0
50TPS121 5.0000 10.5000 2.6250 12.750 9.938 5.125 9.44 6.25 0.12 38.7 491000 189000
127 266.7 66.675 323.85 252.41 130.18 239.7 158.8 3.2 17.6 2180.0 841.0
50TPS122 5.0000 11.5000 2.6250 16.000 10.938 5.125 10.31 7.00 0.12 48.8 620000 224000
127 292.1 66.675 406.40 277.81 130.18 261.9 177.8 3.2 22.1 2760.0 996.0
50TPS123 5.0000 12.5000 2.6250 19.750 11.938 5.125 11.38 7.25 0.12 60.0 739000 262000
127.000 317.5 66.675 501.65 303.21 130.18 288.9 184.1 3.2 27.2 3290.0 1170.0
60TPS124 6.0000 9.5000 2.6250 6.750 8.938 6.125 8.56 7.25 0.12 23.8 317000 135000
152.400 241.3 66.675 171.45 227.01 155.58 217.5 184.1 3.2 10.8 1410.0 600.0
60TPS125 6.0000 10.5000 2.6250 9.500 9.938 6.125 9.50 7.38 0.12 33.5 449000 190000
152.400 266.7 66.675 241.30 252.46 155.58 241.3 187.3 3.2 15.2 2000.0 845.0
60TPS126 6.0000 11.5000 2.6250 13.500 10.938 6.125 10.44 7.38 0.12 44.3 607000 225000
152.400 292.1 66.675 342.90 277.81 155.58 265.1 187.3 3.2 20.1 2700.0 1000.0
60TPS127 6.0000 12.5000 2.6250 17.000 11.938 6.125 11.31 7.50 0.12 55.6 725000 250000
152.400 317.5 66.675 431.80 303.21 155.58 287.3 190.5 3.2 25.2 3220.0 1110.0
70TPS129 7.0000 10.5000 2.6250 8.125 9.906 7.125 9.56 8.12 0.12 27.9 365000 149000
177.800 266.7 66.675 206.38 251.62 180.8 242.9 206.4 3.2 12.7 1620.0 663.0
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
364
in. in. in. in. in. in. in. in. in. lbs lbs lbs
mm mm mm mm mm mm mm mm mm kg kN kN
70TPS130 7.0000 11.5000 2.6250 11.500 10.906 7.125 10.50 8.25 0.12 39.1 540000 209000
177.800 292.100 66.675 292.10 277.02 180.98 266.7 209.6 3.2 17.7 2400.0 930.0
70TPS131 7.0000 12.5000 2.6250 15.375 11.906 7.125 11.38 8.25 0.12 51.3 695000 242000
70TPS132
177.800
7.0000
317.500
14.7500
66.675
4.0000
390.53
15.375
302.42
13.906
180.98
7.125
288.9
13.19
209.6
9.00
3.2
0.25
23.3
115.9
3090.0
1010000
1080.0
394000
2
177.800 374.650 101.600 390.53 353.22 180.98 335.0 228.6 6.4 52.6 4490.0 1750.0
80TPS134 8.0000 12.7500 4.0000 8.500 11.906 8.188 11.50 9.38 0.25 65.8 599000 258000
203.200 323.850 101.600 215.90 302.42 207.96 292.1 238.1 6.4 29.8 2660.0 1150.0
80TPS135 8.0000 14.7500 4.0000 12.000 13.906 8.188 13.25 10.38 0.25 105.2 950000 389000
203.200 374.650 101.600 304.80 353.22 207.96 336.6 263.5 6.4 47.7 4230.0 1730.0
80TPS136 8.0000 16.8750 4.0000 19.500 15.906 8.250 15.06 10.50 0.25 150.4 1290000 520000
203.200 428.625 101.600 495.30 404.02 209.55 382.6 266.7 6.4 68.2 5740.0 2310.0
90TPS139 9.0000 14.7500 4.0000 12.000 13.906 9.250 13.38 10.38 0.25 93.1 879000 328000
228.600 374.650 101.600 304.80 353.22 234.95 339.7 263.5 6.4 42.2 3910.0 1460.0
90TPS140 9.0000 16.8750 4.0000 19.500 15.906 9.250 15.19 10.50 0.25 139.5 1250000 482000
228.600 428.625 101.600 495.30 404.02 234.95 385.8 266.7 6.4 63.3 5560.0 2140.0
100TPS143 10.0000 16.8750 4.0000 16.750 15.906 10.250 15.25 11.50 0.25 124.0 1160000 394000
254.000 428.625 101.600 425.45 404.02 260.36 387.4 292.1 6.4 56.2 5160.0 1750.0
100TPS144 10.0000 18.8750 5.0000 20.000 17.906 10.250 17.12 12.00 0.25 219.5 1620000 604000
254.000 479.425 127.000 508.00 454.82 260.36 435.0 304.8 6.4 99.5 7210.0 2690.0
100TPS145 10.0000 20.8750 5.0000 24.000 19.906 10.250 18.94 13.25 0.25 290.6 2150000 825000
254.000 530.225 127.000 609.60 505.62 260.36 481.0 336.6 6.4 131.8 9560.0 3670.0
120TPS151 12.0000 18.8750 5.0000 15.375 17.906 12.250 17.25 13.62 0.25 181.0 1420000 518000
304.800 479.425 127.000 390.53 454.82 311.15 438.2 346.1 6.4 82.1 6340.0 2300.0
120TPS152 12.0000 20.8750 6.0000 24.375 19.906 12.250 19.06 13.88 0.25 307.4 1780000 743000
304.800 530.225 152.400 619.13 505.62 311.15 484.2 352.4 6.4 139.4 7900.0 3300.0
120TPS153 12.0000 24.8750 6.0000 28.500 23.906 12.250 23.00 16.00 0.25 522.4 2900000 1050000
304.800 631.825 152.400 723.90 607.22 311.15 584.2 406.4 6.4 236.9 12900.0 4680.0
140TPS158 14.0000 20.8750 4.8750 19.500 19.875 14.250 19.25 15.50 0.25 196.6 1620000 588000
355.600 530.225 123.825 495.30 504.82 361.95 489.0 393.7 6.4 89.2 7200.0 2610.0
140TPS159 14.0000 22.8750 4.8750 28.500 21.875 14.250 21.06 15.50 0.25 275.6 2250000 802000
355.600 581.025 123.825 723.90 555.62 361.95 535.0 393.7 6.4 125.0 10000.0 3570.0
140TPS160 14.0000 24.8750 4.8750 36.125 23.875 14.250 22.88 16.38 0.25 376.9 2840000 908000
355.600 631.825 123.825 917.58 606.62 361.95 581.0 415.9 6.4 170.9 12600.0 4040.0
160TPS164 16.0000 22.8750 6.0000 17.500 21.875 16.250 21.25 17.50 0.25 273.2 1770000 695000
406.400 581.025 152.400 444.50 555.62 412.75 539.8 444.5 6.4 123.9 7860.0 3090.0
160TPS165 16.0000 25.0000 6.0000 23.500 23.875 16.250 23.06 18.00 0.25 384.6 2510000 937000
406.400 635.000 152.400 596.90 606.42 412.75 585.8 457.2 6.4 174.4 11200.0 4170.0
160TPS166 16.0000 27.0000 6.0000 29.625 25.875 16.250 24.94 18.50 0.25 506.7 3090000 1060000
406.400 685.800 152.400 752.48 657.22 412.75 633.4 469.9 6.4 229.8 13800.0 4710.0
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
365
D
Thrust Tapered Roller
H
Bearings Type TTHD d
Type TTHD thrust tapered roller bearings are well suited for applica- rs MIN.
tions, such as in crane hooks, where high thrust loads and heavy
shock may be encountered.
Suffix 278 in the bearing number indicates a full complement of T
rollers without cage. These full complement bearings are used only in
slow speed applications.
rs MIN.
E
30TTHD013 3.0000 6.3750 1.3125 5.88 3.44 0.12 7.9 179000 106000
76.2 161.925 33.338 149.2 87.3 3.2 3.6 796.0 471.0
30TTHD01300278 3.0000 6.3750 1.3125 5.88 3.44 0.12 7.7 281000 139000
76.2 161.925 33.338 149.2 87.3 3.2 3.5 1250.0 618.0
40TTHD015AA967 4.0000 8.5000 1.8125 7.78 4.50 0.12 19.8 398000 219000
101.6 215.9 46.038 197.6 114.3 3.2 9 1770.0 974.0
40TTHD015AA968 4.0000 8.5000 1.8125 7.78 4.50 0.12 19.0 515000 250000
101.6 215.9 46.038 197.6 114.3 3.2 8.6 2290.0 1110.0
45TTHD020 4.5000 9.8750 2.1250 9.16 5.12 0.16 31.9 516000 281000
114.3 250.825 53.975 232.6 130.2 4 14.5 2300.0 1250.0
50TTHD024 5.0000 9.8750 2.1875 9.06 5.75 0.19 31.0 447000 249000
127 250.825 55.562 230.2 146 4.8 14.1 1990.0 1110.0
50TTHD02400278 5.0000 9.8750 2.1875 9.06 5.75 0.19 29.2 614000 297000
127 250.825 55.562 230.2 146 4.8 13.2 2730.0 1320.0
50TTHD025 5.0000 10.5000 2.3125 9.75 5.62 0.19 38.5 588000 315000
127 266.7 58.738 247.6 142.9 4.8 17.5 2620.0 1400.0
50TTHD02500278 5.0000 10.5000 2.3125 9.75 5.62 0.19 36.5 770000 363000
127 266.7 58.738 247.6 142.9 4.8 16.6 3420.0 1610.0
60TTHD026 6.0000 12.5000 2.7500 11.56 6.69 0.25 65.2 821000 426000
152.4 317.5 69.85 293.7 169.9 6.4 29.6 3650.0 1890.0
60TTHD02600278 6.0000 12.5000 2.7500 11.56 6.69 0.25 61.3 1080000 491000
152.4 317.5 69.85 293.7 169.9 6.4 27.8 4800.0 2180.0
65TTHD029 6.5000 12.2500 3.5000 11.06 7.62 0.25 75.5 611000 370000
165.1 311.15 88.9 281 193.7 6.4 34.2 2720.0 1650.0
65TTHD02900278 6.5000 12.2500 3.5000 11.06 7.62 0.25 67.6 742000 403000
165.1 311.15 88.9 281 193.7 6.4 30.7 3300.0 1790.0
66TTHD030 6.6250 12.0000 2.7500 11.06 7.44 0.25 54.1 599000 335000
168.275 304.8 69.85 281 188.9 6.4 24.5 2660.0 1490.0
66TTHD03000278 6.6250 12.0000 2.7500 11.06 7.44 0.25 50.2 786000 386000
168.275 304.8 69.85 281 188.9 6.4 22.8 3500.0 1720.0
68TTHD031 6.8750 14.1250 3.2500 13.00 7.88 0.25 100.6 973000 517000
174.625 358.775 82.55 330.2 200 6.4 45.6 4330.0 2300.0
(1)
The fillet radius for shaft or housing should be min 1⁄64" less than r.
366
70TTHD032 7.0000 14.5000 3.2500 13.25 8.00 0.31 104.2 1040000 538000
70TTHD03200278
177.8
7.0000
368.3
14.5000
82.55
3.2500
336.6
13.25
203.2
8.00
7.9
0.31
47.3
96.4
4640.0
1370000
2390.0
620000
2
177.8 368.3 82.55 336.6 203.2 7.9 43.7 6100.0 2760.0
70TTHD033 7.0000 17.0000 4.0000 15.69 8.06 0.31 191.0 1800000 882000
177.8 431.8 101.6 398.4 204.8 7.9 86.6 7980.0 3920.0
80TTHD034 8.0000 16.5000 3.6250 15.12 8.88 0.38 150.4 1400000 705000
203.2 419.1 92.075 384.2 225.4 9.5 68.2 6210.0 3140.0
80TTHD03400278 8.0000 16.5000 3.6250 15.12 8.88 0.38 139.5 1830000 813000
203.2 419.1 92.075 384.2 225.4 9.5 63.3 8150.0 3620.0
81TTHD035 8.1250 16.5000 4.7500 14.81 9.19 0.38 198.0 1380000 770000
206.375 419.1 120.65 376.2 233.4 9.5 89.8 6150.0 3420.0
90TTHD039 9.0000 19.0000 4.1250 17.56 10.19 0.44 230.1 2060000 1010000
228.6 482.6 104.775 446.1 258.8 11.1 104.4 9160.0 4510.0
90TTHD03900278 9.0000 19.0000 4.1250 17.56 10.19 0.44 213.3 2540000 1120000
228.6 482.6 104.775 446.1 258.8 11.1 96.7 11300.0 4960.0
92TTHD039 9.2500 19.0000 4.1250 17.56 10.19 0.44 223.1 2060000 1010000
234.95 482.6 104.775 446.1 258.8 11.1 101.2 9160.0 4510.0
92TTHD043 9.2500 21.5000 5.0000 19.75 10.62 0.62 377.4 2740000 1370000
234.95 546.1 127 501.6 269.9 15.9 171.2 12200.0 6100.0
100TTHD045 10.0000 21.2500 4.6250 19.62 11.25 0.44 326.0 2700000 1280000
254 539.75 117.475 498.5 285.8 11.1 147.8 12000.0 5680.0
110TTHD047 11.0000 23.7500 5.3750 21.75 12.50 0.44 478.7 3190000 1600000
279.4 603.25 136.525 552.4 317.5 11.1 217.1 14200.0 7120.0
110TTHD04700278 11.0000 23.7500 5.3750 21.75 12.50 0.44 438.6 3990000 1770000
279.4 603.25 136.525 552.4 317.5 11.1 198.9 17700.0 7860.0
160TTHD064* 16.0000 28.0000 5.7500 26.00 17.69 0.38 608.8 3770000 1880000
406.4 711.2 146.05 660.4 449.3 9.5 276.1 16800.0 8370.0
160TTHD065* 16.0000 33.0000 7.0000 30.56 18.06 0.50 1168.8 6240000 3100000
406.4 838.2 177.8 776.3 458.8 12.7 530.1 27800.0 13800.0
160TTHD06500278* 16.0000 33.0000 7.0000 30.56 18.06 0.50 1068.7 7710000 3410000
406.4 838.2 177.8 776.3 458.8 12.7 484.7 34300.0 15200.0
(1)
The fillet radius for shaft or housing should be a minimum of 1⁄64" less than r.
367
Thrust Tapered D1
H
Roller Bearings d
Type TTVF rs MAX.
in. in. in. in. in. in. in. in. in. lbs lbs lbs
mm mm mm mm mm mm mm mm mm kg kN kN rpm
F-3167-B 3.9990 8.4990 1.8125 0.375 8.470 4.039 7.62 4.25 0.10 20.5 353000 198000 1350
101.575 215.875 46.038 9.53 215.14 102.59 193.7 108 2.5 9.3 1570.0 880.0
W-3217-B 5.0000 10.5000 2.3125 0.500 10.470 5.020 9.38 5.88 0.14 41.0 578000 304000 1090
127.000 266.700 58.738 12.70 265.94 127.51 238.1 149.2 3.6 18.6 2570.0 1350.0
S-4055-C 5.9045 11.8000 3.5312 1.000 11.750 6.063 10.53 6.88 0.12 79.0 754000 416000 970
149.974 299.720 89.692 25.40 298.45 154 267.5 174.6 3 35.8 3350.0 1850.0
G-3304-B 6.6250 12.0000 2.7500 0.562 11.938 6.750 10.94 7.44 0.25 57.0 839000 429000 950
168.275 304.800 69.850 14.29 303.21 171.45 277.8 188.9 6.4 25.9 3730.0 1910.0
W-3218-B 7.0000 14.5000 3.2500 0.688 14.438 7.125 13.25 8.00 0.24 109.0 1410000 660000 790
177.800 368.300 82.550 17.46 366.71 180.98 336.6 203.2 6.1 49.4 6270.0 2940.0
F-3094-C 8.9990 16.9980 3.5000 0.625 16.968 9.125 15.62 10.12 0.20 158.0 1600000 769000 670
228.575 431.749 88.900 15.88 430.99 231.78 396.9 257.2 5.1 71.7 7120.0 3420.0
I-2077-C 9.9990 20.0000 3.7500 0.750 19.968 10.094 18.44 11.12 0.25 243.0 2260000 1020000 570
253.975 508.000 95.250 19.05 507.19 256.38 468.3 282.6 6.4 110.2 10000.0 4530.0
R-2927-C 10.0000 20.0000 4.2500 0.844 19.938 10.125 18.38 11.25 0.19 272.0 2720000 1250000 570
254.000 508.000 107.950 21.43 506.41 257.18 466.7 285.8 4.8 123.4 12100.0 5550.0
G-3224-C 10.1000 21.5000 6.5000 1.375 21.375 10.188 20.31 11.88 0.24 501.0 3350000 1780000 530
256.540 546.100 165.100 34.92 542.92 258.76 515.9 301.6 6.1 227.2 14900.0 7900.0
S-4077-C 10.2362 18.8956 5.2000 1.062 18.833 10.361 16.81 11.81 0.19 279.0 2020000 1060000 610
259.999 479.948 132.080 26.99 478.36 263.17 427 300 4.8 126.5 8980.0 4720.0
C-8091-C 11.0000 23.7500 5.3750 1.188 23.688 11.125 21.75 12.50 0.19 508.0 3980000 1770000 480
279.400 603.250 136.525 30.16 601.66 282.58 552.4 317.5 4.8 230.4 1770.0 7890.0
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
368
(max.)
Rating
Coa
Rating
Ct
(oil
bath
only)
2
in. in. in. in. in. in. in. in. in. lbs lbs lbs
mm mm mm mm mm mm mm mm mm kg kN kN rpm
G-3272-C 11.9990 24.0000 4.5000 1.125 23.890 12.094 22.25 13.50 0.25 421.0 3990000 1660000 480
304.775 609.600 114.300 28.58 606.81 307.18 565.2 342.9 6.4 190.9 17800.0 7380.0
E-1994-C 12.0000 26.5000 6.7500 1.469 26.438 12.125 23.94 13.88 0.30 767.0 5100000 2470000 430
304.800 673.100 171.450 37.31 671.51 307.98 608 352.4 7.6 347.8 22700.0 11000.0
F-3090-A 12.0000 29.0000 11.0000 1.750 28.938 12.125 24.19 15.19 0.36 1614.0 6300000 3850000 400
304.800 736.600 279.400 44.45 735.01 307.98 614.4 385.8 9.1 732 28000.0 17100.0
I-2060-C 14.5095 23.9825 4.7500 1.000 23.812 14.625 22.25 15.81 0.38 388.0 2640000 1310000 480
368.541 609.156 120.650 25.40 604.84 371.48 565.2 401.6 9.7 176 11800.0 5840.0
B-8350-C 16.0000 28.0000 6.5781 1.453 27.938 16.125 25.75 17.75 0.36 786.0 4480000 2310000 410
406.400 711.200 167.084 36.91 709.61 409.58 654 450.8 9.1 356.5 19900.0 10300.0
F-3163-C 16.0000 28.0470 5.7500 1.219 28.003 16.125 25.62 17.94 0.30 669.0 4350000 2070000 410
406.400 712.394 146.050 30.96 711.28 409.58 650.9 455.6 7.6 303.4 19300.0 9190.0
F-3131-G 17.0000 34.0000 9.0000 1.750 33.938 17.125 31.00 19.25 0.40 1708.0 8480000 4230000 340
431.800 863.600 228.600 44.45 862.01 434.98 787.4 489 10.2 774.6 37700.0 18800.0
A-6096-C 20.0000 39.0000 7.7500 2.656 39.000 20.062 36.50 22.19 0.50 1946.0 9320000 3760000 290
508 990.600 196.850 67.47 990.60 508.58 927.1 563.6 12.7 882.5 41500.0 16700.0
F-3093-A 22.0000 42.0000 11.2500 2.250 41.938 22.125 37.50 25.19 0.40 3090.0 11100000 6300000 270
558.800 1066.800 285.750 57.15 1065.21 561.98 952.5 639.8 10.2 1401.4 49400.0 28000.0
F-3172-C 28.0000 38.0000 5.0000 1.188 37.938 28.125 36.12 30.00 0.19 781.0 4400000 1950000 300
711.2 965.200 127 30.16 963.61 714.38 917.6 762 4.8 354.2 19600.0 8670.0
H-2054-G 28.0000 39.0000 7.5000 1.750 38.938 28.062 36.88 29.75 0.40 1262.0 6300000 3200000 290
711.2 990.600 190.500 44.45 989.01 712.79 936.6 755.6 10.2 572.3 28000.0 14200.0
D-2864-C 32.4970 46.0000 5.0000 1.250 46.000 32.500 44.50 33.88 0.56 1212.0 9920000 3500000 250
825.424 1168.400 127 31.75 1168.40 825.50 1130.3 860.4 14.2 549.7 44100.0 15600.0
F-3067-C 48.0314 62.0027 7.0000 1.750 62.008 48.031 59.00 49.88 0.25 2587.0 11200000 4930000 180
1219.998 1574.869 177.800 44.45 1575 1219.99 1498.6 1266.8 6.4 1173.2 49900.0 21900.0
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
369
D1
Thrust Tapered Roller H
Bearings Type TTVS d
rs MAX.
V-Flat Tapered Roller bearings Type TTVS have the same basic roller
and raceway design as the TTVF except that the lower washer is two T1
pieces, to permit self-alignment under conditions of initial misalignment. T
d1
rs MAX.
E
D
in. in. in. in. in. in. in. in. in. lbs lbs lbs
mm mm mm mm mm mm mm mm mm kg kN kN rpm
B-7976-C 7.2500 16.0000 8.0000 2.625 15.938 7.375 13.62 9.00 0.24 347.0 1720000 1020000 720
184.15 406.4 203.2 66.68 404.81 187.32 346.1 228.6 6.1 157.4 7650.0 4540.0
B-8824-C 7.8730 15.7460 4.7969 1.433 15.625 8.000 14.12 9.47 0.16 190.0 1580000 807000 730
199.374 399.948 121.841 36.4 396.88 203.2 358.8 240.5 4.1 86.2 7020.0 3590.0
E-2004-C 9.0000 18.9980 6.2500 1.768 18.880 9.125 16.50 11.12 0.19 375.0 2440000 1320000 600
228.6 482.549 158.75 44.91 479.55 231.78 419.1 282.6 4.8 170.1 10900.0 5870.0
H-1685-C 9.5000 19.2480 6.0000 2.250 19.000 9.531 17.00 11.00 0.24 359.0 2240000 1120000 600
241.3 488.899 152.4 57.15 482.6 242.09 431.8 279.4 6.1 162.8 9940.0 4980.0
W-3120-C 9.9990 20.0000 8.5000 2.437 19.875 11.250 16.75 12.50 0.40 553.0 2200000 1350000 580
253.975 508 215.9 61.91 504.82 285.75 425.4 317.5 10.2 250.8 9770.0 6020.0
P-1739-C 12.0000 24.0000 8.5000 2.437 23.938 12.125 21.12 13.75 0.30 793.0 4010000 2260000 480
304.8 609.6 215.9 61.91 608.01 307.98 536.6 349.2 7.6 359.6 17800.0 10000.0
N-2827-G 14.0000 26.0000 10.0000 3.000 25.875 14.125 22.75 16.25 0.40 1065.0 4180000 2490000 440
355.6 660.4 254 76.2 657.22 358.78 577.8 412.8 10.2 483 18600.0 11100.0
B-8424-C 16.0000 34.2500 9.5000 3.250 34.938 17.250 31.62 18.25 0.65 1892.0 8770000 3980000 330
406.4 869.95 241.3 82.55 887.41 438.15 803.3 463.6 16.5 858 39000.0 17700.0
(1)
Maximum shaft or housing fillet radius which bearing corners will clear.
370
371
7 SF 12 – SS
SF spherical plain type; Single fractured outer ring One or two digit number indicating the exact bore size in 1⁄16ths
SBB spherical plain type; Double fractured outer ring of an inch (i.e., 12 refers to 12⁄16" bore which is 3⁄4" bore).
SBT spherical plain angular contact type
372
Spherical
Plain
Bearings
Page
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374
General Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374
BEARING TYPES
SF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374
SF…TT, SF…SS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 374
SBT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375 2
Internal Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375
Load Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375
Misalignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 376
Housing Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 376
Shaft Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 377
Lubrication (SF, SBT) . . . . . . . . . . . . . . . . . . . . . . . . . . . 378
Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 378
Tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 379
Radial Bearings, Type SF . . . . . . . . . . . . . . . . . . . . 380, 381
Angular Contact Bearings, Type SBT . . . . . . . . . . 382, 383
373
BEARING TYPES
SF
These bearings are designed primarily to carry radial loads and handle
moderate misalignment. The outer ring is usually fractured axially in one
place, parallel to its axis, to permit assembly of the bearing rings, which
do not have loading slots.
These types can also be supplied with double-fractured outer rings
(designation SBB) when this feature is desired for easier assembly in
this application. To facilitate handling, a snap ring is usually supplied to
hold the outer ring halves together.
SF
SF…TT, SF…SS
These bearings are dimensionally interchangeable with and have the
same general characteristics as the SF series and incorporate lip seals.
The seals are securely retained in the outer ring and will withstand
high grease pressures during relubrication. Positive retention of the
seals assures full distribution of the lubricant to all bearing surfaces.
SF...TT incorporate two reinforced nitrile rubber seals. SF…SS are
assembled with synthetic resin seals. Operating temperatures of the
seals should not exceed 212°F (100°C).
SF
374
SBT
375
MISALIGNMENT
In many applications, the degree of misalignment of the radial types of
Spherical Plain bearings is determined by the side clearance between
the yoke and the bearing housing as illustrated.
Misalignment greater than α' reduces the load carrying ability of the
α
radial plain spherical bearings. When extreme misalignment is
α'
contemplated, the strength of the shaft in shear and bending should be
carefully checked, since the shaft support may be some distance away
from the bearing.
da
Maximum Tilt Maximum Tilt
Sealed Bearing Unsealed Bearing
α α
The type SBT angular contact bearing permits a tilting angle α
provided the housing shoulder clears the shaft. Such misaligment is
limited by the bore of the outer ring touching the through shaft, as
shown. A larger angle of misalignment is possible where a stub shaft is
used. If the tilting angle exceeds α, however, Timken engineering
should be consulted for recommendations.
Maximum Tilt
(Provided housing shoulder clears shaft)
HOUSING DESIGN
The housing should be strong enough to support the loads applied to Ba Da
the bearings without distortion or risk of fatigue failure.
Y
When using a housing of the type illustrated, with a load applied in
directions “X” or “Y”, the compressive yield strength of the housing
material should be greater than the applied load divided by (Ba • D).
376
When Plain Angular Contact bearings (SBT) are axially loaded, the
housing expands. For proper and safe bearing function, it is vital to
provide a substantial section for the housing. If the thrust limit load
ratings are applied for these bearings, not only should the section of
the housing be generous, but the housing bore diameter (db) must not
be exceeded. This not only supports the thrust load, but strengthens
the housing in the radial direction as well. α
db
The recommended housing bore for the type SBT Angular Contact
bearing produces a tight transition fit. Housing Section - Angular Contact Bearing
SHAFT DESIGN
In applications with heavy radial loads, although alignment takes place
at the spherical bearing surface, rotation or oscillation normally occurs
2
between the bore of the inner ring and the shaft even though an
interference fit may have been used. For this reason, and to facilitate
assembly, the shaft dimensions listed in the tables should be used.
377
TEMPERATURE
Timken Torrington Spherical Plain bearings without seals will operate
satisfactorily up to temperatures of 392°F (200°C). For operation at
greater temperatures, special materials and lubricants will be required.
Operating temperatures for sealed bearings should not exceed 212°F
(100°C).
378
TOLERANCES
Pages 380 through 383 list the nominal bearing dimensions.
Tolerances for these dimensions are listed in Tables 2 and 3 and
are expressed as variances from nominal. Inch-metric conversions
are given in these tables for the convenience of the user.
over incl. over incl. high low high low high low high low
inch mm inch
Outer Diam, Dmp
(1)
mm inch mm
2
over incl. over incl. high low high low high low high low
SHAFT FITS
For normal service, the shaft diameters listed in the dimension tables
produce recommended fits. Table 4 below is to be used only for
applications where a shaft interference fit is required. Consult Timken
for recommendations.
mm inch mm inch
379
B1 B1
d1 d1
D d D d
B B
Type SF Types SF-TT, SF-SS
in. mm in. mm in. mm in. mm in. mm min. max. min. max. lbf lbf
5SF8 0.5000 12.700 0.8750 22.225 0.437 11.10 0.375 9.52 0.719 18.26 0.004 0.008 0.10 0.20 8330 2690
6SF10 0.6250 15.875 1.0625 26.988 0.547 13.89 0.469 11.91 0.899 22.83 0.004 0.008 0.10 0.20 13000 4200
7SF12 0.7500 19.050 1.2500 31.750 0.656 16.66 0.562 14.27 1.080 27.43 0.005 0.009 0.13 0.23 18700 6070
8SF14 0.8750 22.225 1.4375 36.512 0.765 19.43 0.656 16.66 1.258 31.95 0.005 0.009 0.13 0.23 25500 8250
10SF16 1.0000 25.400 1.6250 41.275 0.875 22.22 0.750 19.05 1.437 36.50 0.005 0.009 0.13 0.23 33300 10800
12SF20 1.2500 31.750 2.0000 50.800 1.093 27.76 0.937 23.80 1.795 45.59 0.005 0.009 0.13 0.23 52000 16800
13SF22 1.3750 34.925 2.1875 55.562 1.187 30.15 1.031 26.19 1.937 49.20 0.005 0.009 0.13 0.23 61300 20100
15SF24 1.5000 38.100 2.4375 61.912 1.312 33.32 1.125 28.58 2.155 54.74 0.005 0.009 0.13 0.23 75000 24300
17SF28 1.7500 44.450 2.8125 71.438 1.531 38.89 1.312 33.32 2.515 63.88 0.005 0.009 0.13 0.23 102000 33000
20SF32 2.0000 50.800 3.1875 80.962 1.750 44.45 1.500 38.10 2.875 73.02 0.005 0.009 0.13 0.23 133000 43200
22SF36 2.2500 57.150 3.5625 90.488 1.969 50.01 1.687 42.85 3.235 82.17 0.006 0.010 0.15 0.25 169000 54600
25SF40 2.5000 63.500 3.9375 100.012 2.187 55.55 1.875 47.62 3.590 91.19 0.006 0.010 0.15 0.25 208000 67400
27SF44 2.7500 69.850 4.3750 111.125 2.406 61.11 2.062 52.37 3.950 100.33 0.006 0.010 0.15 0.25 252000 81600
30SF48 3.0000 76.200 4.7500 120.650 2.625 66.68 2.250 57.15 4.312 109.52 0.006 0.010 0.15 0.25 300000 97100
32SF52 3.2500 82.550 5.1250 130.175 2.844 72.24 2.437 61.90 4.675 118.74 0.007 0.011 0.18 0.28 353000 114000
35SF56 3.5000 88.900 5.5000 139.700 3.062 77.77 2.625 66.68 5.040 128.02 0.007 0.011 0.18 0.28 410000 132000
37SF60 3.7500 95.250 5.8750 149.225 3.281 83.34 2.812 71.42 5.390 136.91 0.007 0.011 0.18 0.28 467000 152000
40SF64 4.0000 101.600 6.2500 158.750 3.500 88.90 3.000 76.20 5.750 146.05 0.007 0.011 0.18 0.28 533000 173000
45SBB72 4.5000 114.300 7.0000 177.800 3.937 100.00 3.375 85.72 6.475 164.46 0.007 0.011 0.18 0.28 673000 218000
50SBB80 5.0000 127.000 7.7500 196.850 4.375 111.13 3.750 95.25 7.190 182.63 0.007 0.011 0.18 0.28 833000 270000
60SBB96 6.0000 152.400 8.7500 222.250 4.750 120.65 4.125 104.78 8.156 207.16 0.007 0.011 0.18 0.28 1050000 351000
380
MOUNTING
The housing bore dimensions listed below are applicable to bearings
mounted in steel.
Due to fracturing, the outer ring may be slightly out-of-round.
However, roundness will be restored when the bearing is mounted in a
housing of sufficient cross-section.
The preferred shaft and housing bore dimensions are listed below.
To obtain a shaft interference fit, refer to the m6 tolerance limits listed
in table 4.
α
α'
rb
da ra
da S H
MOUNTING DIMENSIONS
Weight Tilting Angle Shaft Shaft Housing Shaft Diameter Housing Bore
Shoulder Fillet Fillet S H
Diameter Radius* Radius
da ra† rb‡
(approx.) α α′ (max) (max) inches millimeters inches millimeters
lbs kg deg. deg. in. mm in. mm in. mm max. min. max. min. min. max. min. max.
0.044 0.020 5.5 14 0.56 14.3 * * 0.022 0.6 0.4998 0.4994 12.695 12.685 0.8739 0.8747 22.197 22.217
0.079 0.036 6 14 0.70 17.8 * * 0.032 0.8 0.6248 0.6244 15.870 15.860 1.0614 1.0622 26.960 26.980
0.126 0.057 6 14.5 0.84 21.4 * * 0.032 0.8 0.7497 0.7492 19.042 19.029 1.2487 1.2497 31.717 31.742
0.193 0.087 6 14.5 0.98 25.0 * * 0.032 0.8 0.8747 0.8742 22.217 22.204 1.4362 1.4372 36.479 36.504
0.276 0.125 6 14.5 1.12 28.6 * * 0.032 0.8 0.9997 0.9992 25.392 25.379 1.6237 1.6247 41.242 41.267
0.516 0.234 6 14.5 1.41 35.7 * * 0.032 0.8 1.2496 1.2490 31.740 31.725 1.9985 1.9997 50.762 50.792
0.770 0.349 5.5 14 1.53 38.9 * * 0.032 0.8 1.3746 1.3740 34.915 34.900 2.1860 2.1872 55.524 55.554
0.934 0.424 6 14.5 1.70 43.3 * * 0.032 0.8 1.4996 1.4990 38.090 38.075 2.4360 2.4372 61.874 61.904
1.430 0.649 6 15.5 1.97 50.0 * * 0.032 0.8 1.7496 1.7490 44.440 44.425 2.8110 2.8122 71.399 71.429
2.070 0.939 6 15.5 2.25 57.2 * * 0.032 0.8 1.9996 1.9989 50.790 50.772 3.1856 3.1870 80.914 80.950
2.920 1.324 6 14 2.56 65.1 * * 0.032 0.8 2.2496 2.2489 57.140 57.122 3.5606 3.5620 90.439 90.475
4.090 1.855 6 14 2.84 72.2 * * 0.032 0.8 2.4996 2.4989 63.490 63.472 3.9356 3.9370 99.964 100.000
5.380 2.440 6 12 3.12 79.4 0.022 0.6 0.032 0.8 2.7496 2.7489 69.840 69.822 4.3731 4.3745 111.077 111.113
6.870 3.116 6 12 3.41 86.5 0.022 0.6 0.032 0.8 2.9996 2.9989 76.190 76.172 4.7478 4.7494 120.594 120.635
8.630 3.914 6 12 3.70 94.1 0.022 0.6 0.032 0.8 3.2495 3.2486 82.537 82.514 5.1228 5.1244 130.119 130.160
10.700 4.853 6 12 3.97 101.0 0.022 0.6 0.032 0.8 3.4995 3.4986 88.887 88.864 5.4978 5.4994 139.644 139.685
13.000 5.897 6 12 4.25 108.0 0.022 0.6 0.032 0.8 3.7495 3.7486 95.237 95.214 5.8728 5.8744 149.169 149.210
15.600 7.076 6 11.5 4.56 116.0 0.022 0.6 0.032 0.8 3.9995 3.9986 101.587 101.564 6.2478 6.2494 158.694 158.735
21.900 9.934 6 12 5.12 130.0 0.032 0.8 0.044 1.1 4.4995 4.4986 114.287 114.264 6.9978 6.9994 177.744 177.785
29.700 13.472 6 12 5.69 144.0 0.032 0.8 0.044 1.1 4.9994 4.9984 126.985 126.960 7.7474 7.7492 196.784 196.830
38.800 17.600 5 10.5 6.59 168.0 0.032 0.8 0.044 1.1 5.9994 5.9984 152.385 152.360 8.7474 8.7492 222.184 222.230
* For bearing sizes 5SF8 through 25SF40, shaft and shoulder should be undercut to eliminate fillet.
† Equal to minimum inner ring bore chamfer.
‡ Equal to minimum outer ring o.d. chamfer.
381
d1
d
W B1 B
K
5SBT8 0.5000 12.700 0.8750 22.225 0.270 6.86 0.190 4.83 0.300 7.62 0.094 2.39 0.719 18.26 4600 1860
6SBT10 0.6250 15.875 1.0625 26.988 0.340 8.64 0.250 6.35 0.370 9.40 0.109 2.77 0.899 22.83 7600 3080
7SBT12 0.7500 19.050 1.2500 31.750 0.410 10.41 0.310 7.87 0.440 11.18 0.125 3.18 1.080 27.43 11100 4500
8SBT14 0.8750 22.225 1.4375 36.512 0.480 12.19 0.380 9.65 0.520 13.21 0.172 4.37 1.258 31.95 15400 6210
10SBT16 1.0000 25.400 1.6250 41.275 0.550 13.97 0.440 11.18 0.600 15.24 0.203 5.16 1.437 36.50 19400 7860
12SBT20 1.2500 31.750 2.0000 50.800 0.700 17.78 0.550 13.97 0.740 18.80 0.234 5.94 1.795 45.59 31000 12500
13SBT22 1.3750 34.925 2.1875 55.562 0.770 19.56 0.600 15.24 0.840 21.34 0.281 7.14 1.937 49.20 37000 15100
15SBT24 1.5000 38.100 2.4375 61.912 0.840 21.34 0.660 16.76 0.910 23.11 0.312 7.92 2.155 54.74 44500 18300
17SBT28 1.7500 44.450 2.8125 71.438 0.980 24.89 0.790 20.07 1.070 27.18 0.328 8.33 2.515 63.88 60000 24400
20SBT32 2.0000 50.800 3.1875 80.962 1.130 28.70 0.920 23.37 1.230 31.24 0.375 9.52 2.875 73.02 79000 32300
22SBT36 2.2500 57.150 3.5625 90.488 1.270 32.26 1.050 26.67 1.390 35.31 0.453 11.51 3.235 82.17 100000 40800
25SBT40 2.5000 63.500 3.9375 100.012 1.420 36.07 1.180 29.97 1.540 39.12 0.500 12.70 3.590 91.19 126000 51500
27SBT44 2.7500 69.850 4.3750 111.125 1.560 39.62 1.275 32.38 1.700 43.18 0.515 13.08 3.950 100.33 154000 62150
30SBT48 3.0000 76.200 4.7500 120.650 1.710 43.43 1.405 35.69 1.860 47.24 0.578 14.68 4.312 109.52 186000 75000
32SBT52 3.2500 82.550 5.1250 130.175 1.860 47.24 1.545 39.24 2.030 51.56 0.656 16.66 4.675 118.74 218000 87500
35SBT56 3.5000 88.900 5.5000 139.700 2.000 50.80 1.675 42.54 2.180 55.37 0.703 17.86 5.040 128.02 257000 102400
37SBT60 3.7500 95.250 5.8750 149.225 2.150 54.61 1.805 45.85 2.340 59.44 0.765 19.43 5.390 136.91 295000 118500
40SBT64 4.0000 101.600 6.2500 158.750 2.300 58.42 1.935 49.15 2.500 63.50 0.781 19.84 5.750 146.05 336000 135000
45SBT72 4.5000 114.300 7.0000 177.800 2.590 65.79 2.195 55.75 2.800 71.12 0.875 22.22 6.475 164.46 432000 173500
50SBT80 5.0000 127.000 7.7500 196.850 2.880 73.15 2.455 62.36 3.130 79.50 1.000 25.40 7.190 182.63 524000 211000
60SBT96 6.0000 152.400 8.7500 222.250 3.100 78.74 2.615 66.42 3.375 85.72 1.370 34.80 8.156 207.16 585000 235000
382
MOUNTING
The housing bore dimensions listed below are applicable to bearings
mounted in steel. The recommended diameters of shoulder supports
should be used to assure proper function of the bearing.
The preferred shaft and housing bore dimensions are listed below.
To obtain a shaft interference fit, refer to the m6 tolerance limits listed
in table 4.
The bearings are to be mounted with sufficient axial preload to
ensure contact of the spherical surfaces under all load conditions.
α da
S
ra
rb
2
db
H
Maximum Tilt for Bearing Mounting Detail
MOUNTING DIMENSIONS
Weight Tilting Shaft Shaft Housing Housing Shaft Diameter Housing Bore
Angle Shoulder Fillet Shoulder Fillet S H
Diameter Radius Diameter Radius
α da ra† db rb
lbs kg deg. in. mm in. mm in. mm in. mm max. min. max. min. min. max. min. max.
0.029 0.013 7 0.67 17.0 0.020 0.5 0.57 14.5 0.020 0.5 0.4998 0.4994 12.695 12.685 0.8739 0.8747 22.197 22.217
0.056 0.025 6 0.84 21.3 0.030 0.8 0.70 17.8 0.030 0.8 0.6248 0.6244 15.870 15.860 1.0614 1.0622 26.960 26.980
0.083 0.038 6 1.02 25.9 0.040 1.0 0.84 21.3 0.040 1.0 0.7497 0.7492 19.042 19.029 1.2487 1.2497 31.717 31.742
0.110 0.050 5.5 1.23 31.2 0.080 2.0 0.97 24.6 0.080 2.0 0.8747 0.8742 22.217 22.204 1.4362 1.4372 36.479 36.504
0.188 0.085 6 1.40 35.6 0.080 2.0 1.12 28.4 0.080 2.0 0.9997 0.9992 25.392 25.379 1.6237 1.6247 41.242 41.267
0.351 0.159 6 1.71 43.4 0.080 2.0 1.39 35.3 0.080 2.0 1.2496 1.2490 31.740 31.725 1.9985 1.9997 50.762 50.792
0.470 0.213 4 1.89 48.0 0.100 2.5 1.48 37.6 0.100 2.5 1.3746 1.3740 34.915 34.900 2.1860 2.1872 55.524 55.554
0.662 0.300 5.5 2.05 52.1 0.100 2.5 1.66 42.2 0.100 2.5 1.4996 1.4990 38.090 38.075 2.4360 2.4372 61.874 61.904
1.010 0.458 6 2.36 59.9 0.100 2.5 1.95 49.5 0.100 2.5 1.7496 1.7490 44.440 44.425 2.8110 2.8122 71.399 71.429
1.480 0.671 5.5 2.75 69.8 0.140 3.6 2.22 56.4 0.140 3.6 1.9996 1.9989 50.790 50.772 3.1856 3.1870 80.914 80.950
2.090 0.948 5.5 3.06 77.7 0.140 3.6 2.50 63.5 0.140 3.6 2.2496 2.2489 57.140 57.122 3.5606 3.5620 90.439 90.475
2.490 1.129 5 3.37 85.6 0.140 3.6 2.75 69.9 0.140 3.6 2.4996 2.4989 63.490 63.472 3.9356 3.9370 99.964 100.000
3.860 1.751 5 3.71 94.2 0.180 4.6 3.03 77.0 0.180 4.6 2.7496 2.7489 69.840 69.822 4.3731 4.3745 111.077 111.113
5.020 2.277 5 4.07 103.0 0.180 4.6 3.30 83.8 0.180 4.6 2.9996 2.9989 76.190 76.172 4.7478 4.7494 120.594 120.635
6.360 2.885 5 4.42 112.0 0.180 4.6 3.58 90.9 0.180 4.6 3.2495 3.2486 82.537 82.514 5.1228 5.1244 130.119 130.160
7.870 3.570 5 4.77 121.0 0.180 4.6 3.85 97.8 0.180 4.6 3.4995 3.4986 88.887 88.864 5.4978 5.4994 139.644 139.685
9.590 4.350 4.5 5.11 130.0 0.180 4.6 4.10 104.0 0.180 4.6 3.7495 3.7486 95.237 95.214 5.8728 5.8744 149.169 149.210
11.600 5.262 4.5 5.43 138.0 0.180 4.6 4.37 111.0 0.180 4.6 3.9995 3.9986 101.587 101.564 6.2478 6.2494 158.694 158.735
17.100 7.756 4.5 6.14 156.0 0.180 4.6 4.90 125.0 0.180 4.6 4.4995 4.4986 114.287 114.264 6.9978 6.9994 177.744 177.785
24.400 11.068 4.5 6.83 174.0 0.180 4.6 5.47 139.0 0.180 4.6 4.9994 4.9984 126.984 126.959 7.7474 7.7492 196.784 196.830
38.300 17.373 4.5 7.75 197.0 0.180 4.6 6.50 165.0 0.180 4.6 5.9994 5.9984 152.385 152.360 8.7474 8.7492 222.184 222.230
383
384
387
MJH - 18 16 1 - OH
Bore Width
16 = 16⁄16 = 1" 12 = 12⁄16 = 3⁄4"
18 = 18⁄16 = 1 1⁄8" 16 = 16⁄16 = 1"
I R - 14 16 - OH
Bore Width (IR series only)
5 = 5⁄16" 12 = 12⁄16 = 3⁄4"
14 = 14⁄16 = 7⁄8" 16 = 16⁄16 = 1"
HK 10 12 AS1
Bore diameter Suffix
10 = 10 mm RS lip contact seal on one side of the bearing
25 = 25 mm .2RS lip contact seal on each side of the bearing
AS1 lubricating hole
JR 10 x 14 x 12 JS1
Bore diameter Width
10 = 10 mm 12 = 12 mm
20 = 20 mm 30 = 30 mm
388
Drawn Cup
Needle Roller
Bearings
Page Page
DRAWN CUP BEARINGS – METRIC SERIES DRAWN CUP BEARINGS – INCH SERIES
Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390 Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 398
Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 390 Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 398
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 391 Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 399
Inner Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 391 Inner Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
Load Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 391 Load Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 393 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 402
389
HK BK HKRS HK.2RS
SUFFIXES
AS1 lubricating hole
RS one seal
.2RS two seals
390
INNER RINGS
When it becomes impractical to meet the shaft raceway
design requirements (hardness, case depth, surface finish
etc.) outlined in the Needle Bearing Engineering section,
standard inner rings may be used with metric series drawn
cup bearings. These are tabulated on pages 483-488. It is
recommended that when metric series inner rings are used
with metric series drawn cup bearings, they should be
mounted with a loose transition fit on the shaft using g6 (g5)
shaft diameter tolerance. The inner ring should be end-
clamped against a shoulder. If a tight transition fit must be
used, [shaft diameter tolerance h6 (h5)], to keep the inner
ring from rotating relative to the shaft, the inner ring outside
diameter, as mounted, must not exceed the raceway diameter
required by the drawn cup bearing for the particular applica-
tion. In case the outside diameter of the inner ring, when
mounted on the shaft, exceeds the required raceway diameter
for the matching drawn cup bearing, it should be ground to
proper diameter while mounted on the shaft.
391
392
INSTALLATION PROCEDURES
15°
A
Stamped end
of bearing
D
Generous chamfer
or rounding for E
easy bearing
installation
B
393
394
r r
Open Ends,
Closed At One End C3
Metric Series Fw D Fw D
C C
HK BK
Shaft Dimensions Bearing Inner Ring Load ratings Limiting speeds Mass
Diameter Fw D C C3 min rs min Designation Designation dynamic static Grease Oil Approx.
-0,3 Open ends C C0
mm Closed end kN rpm kg
3 3 6,5 6 0,3 HK0306 1,6 1,14 29 900 46 000 0,001
3 6,5 6 5,2 0,3 BK0306 1,2 0,781 29 900 46 000 0,001
9 9
9
13
13
10
10 8,4
0,4
0,4
HK0910
BK0910
JR6x9x12
JR6x9x12
4,57
4,57
5,07
5,07
19 300
19 300
30 000
30 000
0,004
0,004
3
9 13 12 0,4 HK0912 JR6x9x12 5,65 6,65 19 300 30 000 0,005
9 13 12 10,4 0,4 BK0912 JR6x9x12 5,65 6,65 19 300 30 000 0,005
395
r r
Open Ends,
Closed At One End C3
Metric Series Fw D Fw D
C C
HK BK
Shaft Dimensions Bearing Inner Ring Load ratings Limiting speeds Mass
Diameter Fw D C C3 min rs min Designation Designation dynamic static Grease Oil Approx.
-0,3 Open ends C C0
mm Closed end kN rpm kg
20 20 26 12 1 HK2012 JR15x20x12 8,97 12,5 10 600 16 000 0,016
20 26 12 9,3 1 BK2012 JR15x20x12 8,97 12,5 10 600 16 000 0,017
20 26 16 1 HK2016 JR17x20x16,5 12,4 18,9 10 600 16 000 0,022
20 26 16 13,3 1 BK2016 JR17x20x16,5 12,4 18,9 10 600 16 000 0,024
20 26 20 1 HK2020 JR17x20x20,5 15,9 26,2 10 600 16 000 0,025
20 26 20 17,3 1 BK2020 JR17x20x20,5 15,5 25,3 10 600 16 000 0,027
20 26 30 1 HK2030 JR17x20x30,5 21,2 37,8 10 600 16 000 0,041
20 26 30 27,3 1 BK2030 JR17x20x30,5 21,2 37,8 10 600 16 000 0,043
396
r r
Sealed Bearings
Metric Series
Fw D Fw D
C C
HK RS HK .2RS
22 22
22
22
28
28
28
16
18
20
1
1
1
HK2216.2RS
HK2218RS
HK2220.2RS
JR17x22x23
JR17x22x23
9,81
13,1
13,1
14,5
20,9
20,9
8 800
8 800
8 800
0,025
0,027
0,031
3
25 25 32 14 1 HK2514RS JR20x25x17 10,9 14,7 7 800 0,027
25 32 16 1 HK2516.2RS JR20x25x17 11,1 15,1 7 800 0,03
25 32 18 1 HK2518RS JR20x25x20,5 16,2 24,6 7 800 0,028
25 32 20 1 HK2520.2RS JR20x25x20,5 16,2 24,6 7 800 0,032
25 32 22 1 HK2522RS JR20x25x26 20,6 33,4 7 800 0,042
25 32 24 1 HK2524.2RS JR20x25x26 20,6 33,4 7 800 0,047
397
B M J JTT
IDENTIFICATION
The prefix letter or letters in inch series drawn cup bearing In addition, there can be other identifying letters which
designation denote whether the bearings are made with a full cover special modification. Please consult a local Timken sales
complement of needle rollers or caged needle rollers. The engineer when special modifications are required.
use of full complement of needle rollers is indicated by the Since the entire identification code in the bearing designa-
prefix code letter B and for use of caged needle rollers by the tion may not appear on the bearing itself, the manufacturer’s
prefix code letter J. parts list or another reliable source should always be consulted
Inch bearings are available in either of two radial cross- when ordering bearings for service or field replacement to
sections. The larger cross-section is indicated by the prefix make certain that the correct bearing with the correct lubricant
code letter H. Absence of the letter H indicates the smaller is used.
radial cross section.
These major features of dimension and construction are
summarized in Table 1. CONSTRUCTION
Table 1 –
Identifying letters – Inch series
Prefix letters in
Bearing Designation
Smaller Larger
roller roller
Full complement
(mechanically
retained) B BH
FULL COMPLEMENT BEARINGS
The original drawn cup needle roller bearing, as invented and
Caged J JH
introduced by Torrington, employs a full complement of needle
rollers. The full complement drawn cup bearing combines
Other prefix letters denoting major construction features are: maximum load carrying capability and low cost with the advan-
M - closed end style tages of the drawn outer ring.
P - open end (finger)cage The inward turned lips of the cup are used to mechanically
T - single seal retain the full complement of needle rollers, providing their
TT - double seal positive radial retention even though it may be necessary to
G - extra-precision remove the shaft repeatedly during servicing of the mecha-
nism employing the bearing.
398
CAGED BEARINGS
The one-piece steel cage, used in most Timken Torrington
caged drawn cup bearings, is designed to provide rigidity
and minimize wear. This cage design separates the roller
guiding and roller retain-ment functions. The portions of the
cage that retain the rollers cannot contact the rollers while
the bearing is operating. Thus, there is no wear which might
affect roller retention. Housing bore Min. initial radial
reference:
The cage contacts the rollers only near their ends at the tolerance .0010 in. J-1616
clearance .0005 in.
roller pitch line, so accurate guidance is achieved with least bearing
effort. Pitch line guidance at the ends of the rollers prevents Manufacturing tolerance Shaft diameter
for bearing .0009 in. tolerance .0005 in.
skewing and assures roller stability, with little stress on the
cage itself. The design minimizes the contact area and force
required for roller guidance, and thus minimizes drag be-
tween cage and rollers. BEARING MOUNTING FITS AND
The same design feature which assures no contact
between roller retention bars and rollers while the bearing is
RADIAL INTERNAL CLEARANCE
Drawn cup bearings are manufactured to a degree of preci-
3
operating also provides ample clearance along the length of sion that will satisfy the radial clearance requirements of
the roller to enhance the circulation of lubricant. most applications. The total radial clearance of an installed
Torrington also has available bearings with other cage drawn cup bearing results from the build up of manufacturing
designs. Bearings with engineered polymer cages are for tolerances of the housing bore, inner raceway o.d. and the
use where operating conditions permit. Before applying bearing, as well as the minimum radial clearance required for
bearings with engineered polymer cages, please consult the application.
Timken Engineering. For bearings of nominal inch dimensions, the recom-
mended mounting dimensions will provide correct running
clearance for most applications. Closer control of radial
SEALED BEARINGS
clearance would be governed by the user’s capability of
Torrington drawn cup caged needle roller bearings are
holding housing and shaft raceway dimensional tolerances
offered with integral seals. The tables of dimensions on
tighter than the limits shown on the tabular pages.
pages 420-421 indicate those sizes available with lip contact
The drawing illustrates the manufacturing tolerances
seals which limit the bearing operating temperature between
and resulting clearances applying to medium size drawn cup
-25°F and 225°F. The seal lip design achieves a light and
bearings in rotating applications when using the recom-
constant contact with the shaft throughout the range of
mended tabulated mounting dimensions.
mounting bear-ing clearances thereby ensuring positive
Radial clearance in a mounted bearing may be more
sealing and low frictional drag.
closely controlled by reducing the manufacturing tolerances
Sealed drawn cup bearings are intended to retain
of the housing bore and inner raceway diameter. Where
grease or non-pressurized oil within a bearing while also
extremely close control of radial clearance is required for
preventing contaminants from entering the raceway area.
bearings of nominal inch dimensions, extra-precision full
complement bearings are available (see page 418).
399
400
Bearing bore should be checked with “go” and “no go” plug
gages. The “go” gage size is the minimum needle roller
complement bore diameter. The “no go” gage size is larger
than the maximum needle roller complement bore diameter
by 0.0001 inch.
401
15°
A
Stamped end
of bearing
D
Generous chamfer
or rounding for E
easy bearing
installation
B
402
403
404
405
X
FW D FW S
H
shaft surface to be
58 HRC or equivalent
Caged
Bearing
406
Caged Bearings
Open Ends, Closed at One End
Inch Series
Check for availability. C C
FW D FW
Inch
Series
Mounting dimensions are based on the inner ring rotating and the Drawn cup bearings of nominal inch dimensions with one closed end, which are not
outer ring being stationary relative to the load. The housing should tabulated, may be made available upon request.
be of high strength material. See pages E115-E116 for discussion of Caged drawn cup bearings of nominal inch dimensions, with an engineered polymer
shaft and housing design. cage, may be made available upon request.
407
X
FW D FW S
H
shaft surface to be
58 HRC or equivalent
Caged
Bearing
408
Caged Bearings
Open Ends, Closed at One End
Inch Series
Check for availability. C C
FW D FW
Inch
Series
Mounting dimensions are based on the inner ring rotating and the outer ring being Drawn cup bearings of nominal inch dimensions with one closed end,
stationary relative to the load. The housing should be of high strength material. See which are not tabulated, may be made available upon request.
pages E115-E116 for discussion of shaft and housing design. Caged drawn cup bearings of nominal inch dimensions, with an
engineered polymer cage, may be made available upon request.
409
X
FW D FW S
H
shaft surface to be
58 HRC or equivalent
Caged
Bearing
410
Caged Bearings
Open Ends, Closed at One End
Inch Series
Check for availability. C C
FW D FW
Inch
Series
Mounting dimensions are based on the inner ring rotating and the outer ring being Drawn cup bearings of nominal inch dimensions with one closed end,
stationary relative to the load. The housing should be of high strength material. See which are not tabulated, may be made available upon request.
pages E115-E116 for discussion of shaft and housing design. Caged drawn cup bearings of nominal inch dimensions, with an
engineered polymer cage, may be made available upon request.
411
X
FW D FW S
H
shaft surface to be
58 HRC or equivalent
Caged
Bearing
1 1⁄ 8 1.1250 1.3750 0.375 B-186 M-1861 2 720 4 580 2 500 3 800 0.09 0.039 0.044
1.1250 1.3750 0.500 B-188 M-1881 3 950 7 420 2 500 3 800 0.09 0.052 0.059
1.1250 1.3750 0.625 B-1810 — 5 080 10 300 2 500 3 800 — 0.065 —
1.1250 1.3750 0.750 B-1812 M-18121 6 140 13 100 2 500 3 800 0.09 0.078 0.088
1.1250 1.3750 1.000 B-1816 M-18161 8 130 18 800 2 500 3 800 0.09 0.104 0.118
1.1250 1.5000 0.750 BH-1812 MH-18121 7 090 11 900 3 600 5 600 0.12 0.123 0.138
1.1250 1.5000 1.000 BH-1816 MH-18161 9 560 17 500 3 600 5 600 0.12 0.164 0.186
1.1250 1.5000 1.125 — — — — — — — — —
1.1250 1.5000 1.250 BH-1820 MH-18201 11 900 23 200 3 600 5 600 0.12 0.205 0.232
412
Caged Bearings
Open Ends, Closed at One End
Inch Series
Check for availability. C C
FW D FW
Inch
Series
413
X
FW D FW S
H
shaft surface to be
58 HRC or equivalent
Caged
Bearing
1 1⁄4 1.2500 1.5000 0.500 B-208 M-2081 4 170 8 240 2 300 3 500 0.09 0.057 0.065
1.2500 1.5000 0.625 B-2010 M-20101 5 370 11 400 2 300 3 500 0.09 0.071 0.080
1.2500 1.5000 0.750 B-2012 M-20121 6 490 14 500 2 300 3 500 0.09 0.086 0.099
1.2500 1.5000 1.000 B-2016 M-20161 8 590 20 800 2 300 3 500 0.09 0.114 0.130
1.2500 1.5000 1.250 B-2020 M-20201 10 600 27 200 2 300 3 500 0.09 0.143 0.162
1.2500 1.6250 0.500 BH-208 MH-2081 4 420 6 750 3 300 5 000 0.12 0.090 0.102
1.2500 1.6250 0.750 BH-2012 MH-20121 7 440 13 200 3 300 5 000 0.12 0.135 0.153
1.2500 1.6250 1.000 BH-2016 MH-20161 10 100 19 500 3 300 5 000 0.12 0.179 0.203
1.2500 1.6250 1.250 BH-2020 MH-20201 12 600 25 800 3 300 5 000 0.12 0.224 0.254
1 5⁄ 16 1.3125 1.6250 0.500 B-218 M-2181 4 330 7 570 2 600 4 100 0.11 0.076 0.086
1.3125 1.6250 0.625 B-2110 M-21101 5 740 10 900 2 600 4 100 0.11 0.095 0.108
1.3125 1.6250 1.250 B-2120 — 11 800 27 500 2 600 4 100 — 0.191 —
1 3⁄ 8 1.3750 1.6250 0.500 B-228 M-2281 4 390 9 070 2 100 3 200 0.09 0.062 0.070
1.3750 1.6250 0.750 B-2212 M-22121 6 830 16 000 2 100 3 200 0.09 0.094 0.107
1.3750 1.6250 1.000 B-2216 M-22161 9 030 22 900 2 100 3 200 0.09 0.125 0.142
1.3750 1.6250 1.250 B-2220 M-22201 11 100 29 900 2 100 3 200 0.09 0.156 0.177
1.3750 1.7500 0.500 BH-228 — 4 770 7 540 3 000 4 700 — 0.098 —
1.3750 1.7500 0.625 BH-2210 — 6 410 11 000 3 000 4 700 — 0.122 —
1.3750 1.7500 0.750 BH-2212 MH-22121 7 930 14 500 3 000 4 700 0.12 0.146 0.165
1.3750 1.7500 1.000 BH-2216 MH-22161 10 700 21 300 3 000 4 700 0.12 0.195 0.221
1.3750 1.7500 1.250 BH-2220 — 13 400 28 300 3 000 4 700 — 0.244 0.276
1 1⁄ 2 1.5000 1.8750 0.500 B-248 M-2481 5 020 8 340 2 800 4 300 0.12 0.105 0.119
1.5000 1.8750 0.625 B-2410 M-24101 6 710 12 100 2 800 4 300 0.12 0.132 0.150
1.5000 1.8750 0.750 B-2412 M-24121 8 290 15 900 2 800 4 300 0.12 0.158 0.179
1.5000 1.8750 0.875 B-2414 M-24141 9 780 19 700 2 800 4 300 0.12 0.184 0.209
1.5000 1.8750 1.000 B-2416 M-24161 11 200 23 300 2 800 4 300 0.12 0.211 0.239
1.5000 1.8750 1.250 B-2420 M-24201 13 900 31 000 2 800 4 300 0.12 0.263 0.298
414
Caged Bearings
Open Ends, Closed at One End
Inch Series
Check for availability. C C
FW D FW
Inch
Series
415
X
FW D FW S
H
shaft surface to be
58 HRC or equivalent
Caged
Bearing
416
Caged Bearings
Open Ends, Closed at One End
Inch Series
Check for availability. C C
FW D FW
Inch
Series
417
EXTRA-PRECISION Gaging
BEARINGS – INCH SERIES Nominal Diameter inside
Shaft Ring Needle Rollers
Open end full complement mechanically retained drawn cup Diameter Gage (Fws min)
needle roller bearings, manufactured to inch standards, are inch
offered with extra-precision specifications. The manufacturing min. max.
tolerance of these bearings is one-third that of the precision
1⁄8 0.2473 0.1256 0.1260
bearings. In production operations using closer tolerances on 5⁄32 0.2785 0.1569 0.1573
shaft and housing, they will assemble with consistently lower 3⁄16 0.3390 0.1881 0.1885
radial internal clearances than can be expected with the 1⁄4 0.4328 0.2506 0.2510
precision series bearings. 5⁄16 0.4953 0.3131 0.3135
Extra-precision bearings are suitable for those applications 5⁄16
H 0.5578 0.3131 0.3135
requiring close control of radial play and eccentricity. They 3⁄8 0.5578 0.3756 0.3760
are also preferred when two bearings are mounted adjacent H 3⁄8 0.6203 0.3756 0.3760
to each other since the greater accuracy in manufacture will 7⁄16 0.6203 0.4381 0.4385
provide better load distribution between the bearings. H 7⁄16 0.6828 0.4381 0.4385
Nominal dimensions, load ratings, limiting speeds and 1⁄2 0.6828 0.5006 0.5010
other general specifications for extra-precision bearings are H 1⁄2 0.7453 0.5006 0.5010
the same as for the corresponding “B” or “BH” sizes of drawn 9⁄16 0.7453 0.5631 0.5635
cup needle bearings. Consequently, the tabular data on H 9⁄16 0.8078 0.5631 0.5635
pages 406 to 417 can be used in bearing size selection. 5⁄8 0.8078 0.6256 0.6260
When ordering an extra-precision bearing, add the prefix H 5⁄8 0.8703 0.6256 0.6260
letter “G” to the bearing designation. For example, after 11⁄16 0.8703 0.6881 0.6885
following the size selection procedure outlined on pages E77 H 11⁄16 0.9328 0.6881 0.6885
to E117, bearing B-1212 is selected, but extra-precision 3⁄4 0.9950 0.7503 0.7507
H 3⁄4 1.0575 0.7503 0.7507
tolerances are required. These are designated by ordering a
GB-1212 bearing. 13⁄16 1.0575 0.8128 0.8132
To realize the advantages of the expected closer radial H 13⁄16 1.1200 0.8128 0.8132
internal clearance of the extra-precision bearing, the user 7⁄8 1.1200 0.8753 0.8757
H 7⁄8 1.1825 0.8753 0.8757
must have the capability of producing housing bore and shaft
15⁄16 1.1825 0.9378 0.9382
raceway diameters to the close tolerances indicated by the
tabular data on the facing page. 1 1.2450 1.0003 1.0007
The resulting total radial internal clearance within the H 1 1.3075 1.0003 1.0007
installed GB-1212 extra-precision drawn cup needle roller 1 1⁄16 1.3075 1.0628 1.0632
bearing will lie in the range from 0.0002" to 0.0012". 1 1⁄8 1.3700 1.1253 1.1257
H 1 1⁄8 1.4950 1.1253 1.1257
Inspection dimensions for the extra-precision bearings are
given in the table at the right. Note that these bearings must 1 3 ⁄16 1.4950 1.1878 1.1882
be inspected while mounted in the specified ring gage. 1 1⁄4 1.4950 1.2503 1.2507
H 1 1⁄4 1.6200 1.2503 1.2507
Bearing bores are checked with “GO” and “NO GO” plug
1 5⁄16 1.6200 1.3128 1.3132
gages. The “GO” gage size is the minimum diameter inside
1 3⁄8 1.6200 1.3753 1.3757
the needle rollers. The “NO GO” gage size is 0.0001" larger
than the maximum diameter inside the needle rollers. H 1 3⁄8 1.7450 1.3753 1.3757
1 1⁄2 1.8700 1.5003 1.5008
Procedures for selecting ring and plug gage dimensions
1 5⁄8 1.9950 1.6253 1.6258
are the same as for those involving precision needle bearings
1 3⁄4 2.1200 1.7503 1.7508
as shown on page 401, except that the ring gage diameters 1 7⁄8 2.2450 1.8753 1.8758
and diameters inside the needle rollers must be drawn from
2 2.3700 2.0003 2.0008
the table on this page.
H 2 1⁄16 2.5262 2.0628 2.0633
2 1⁄8 2.4950 2.1253 2.1258
2 1⁄4 2.6200 2.2503 2.2508
2 5⁄8 2.9950 2.6254 2.6260
2 3⁄4 3.1200 2.7504 2.7510
3 1⁄2 3.9950 3.5004 3.5010
418
Mounting
Bearing Shaft Raceway Housing Bore
Bore Nominal Nominal Diameter
Designation bore o.d.
inch
max. min. min. max.
GB-2 .1250 .2500 0.1251 0.1248 0.2470 0.2473
GB-2 1⁄ 2 .1562 .2812 0.1564 0.1561 0.2782 0.2785
GB-3 .1875 .3438 0.1876 0.1873 0.3387 0.3390
GB-4 .2500 .4375 0.2501 0.2498 0.4325 0.4328
GB-5 .3125 .5000 0.3126 0.3123 0.4950 0.4953
GBH-5 .3125 .5625 0.3126 0.3123 0.5575 0.5578
GB-6 .3750 .5625 0.3751 0.3748 0.5575 0.5578
GBH-6 .3750 .6250 0.3751 0.3748 0.6200 0.6203
GB-7 .4375 .6250 0.4376 0.4373 0.6200 0.6203
GBH-7 .4375 .6875 0.4376 0.4373 0.6825 0.6828
GB-8 .5000 .6875 0.5001 0.4998 0.6825 0.6828
GBH-8 .5000 .7500 0.5001 0.4998 0.7450 0.7453
GB-9 .5625 .7500 0.5626 0.5623 0.7450 0.7453
GBH-9 .5625 .8125 0.5626 0.5623 0.8075 0.8078
GB-10 .6250 .8125 0.6251 0.6248 0.8075 0.8078
GBH-10 .6250 .8750 0.6251 0.6248 0.8700 0.8703
GB-11 .6875 .8750 0.6876 0.6873 0.8700 0.8703
GBH-11 .6875 .9375 0.6876 0.6873 0.9325 0.9328
GB-12 .7500 1.0000 0.7501 0.7498 0.9950 0.9953
GBH-12 .7500 1.0625 0.7501 0.7498 1.0575 1.0578
GB-13 .8125 1.0625 0.8126 0.8123 1.0575 1.0578
GBH-13 .8125 1.1250 0.8126 0.8123 1.1200 1.1203
GB-14 .8750 1.1250 0.8751 0.8748 1.1200 1.1203
GBH-14 .8750 1.1875 0.8751 0.8748 1.1825 1.1829
GB-15 .9375 1.1875 0.9376 0.9373 1.1825 1.1829
GB-16
GBH-16
1.0000
1.0000
1.2500
1.3125
1.0001
1.0001
0.9998
0.9998
1.2450
1.3075
1.2454
1.3079 3
GB-17 1.0625 1.3125 1.0626 1.0623 1.3075 1.3079
GB-18 1.1250 1.3750 1.1251 1.1248 1.3700 1.3704
GBH-18 1.1250 1.5000 1.1251 1.1248 1.4950 1.4955
GB-19 1.1875 1.5000 1.1876 1.1873 1.4950 1.4955
GB-20 1.2500 1.5000 1.2501 1.2498 1.4950 1.4955
GBH-20 1.2500 1.6250 1.2501 1.2498 1.6200 1.6205
GB-21 1.3125 1.6250 1.3126 1.3123 1.6200 1.6205
GB-22 1.3750 1.6250 1.3750 1.3747 1.6200 1.6205
GBH-22 1.3750 1.7500 1.3750 1.3747 1.7450 1.7455
GB-24 1.5000 1.8750 1.5000 1.4997 1.8700 1.8705
GB-26 1.6250 2.0000 1.6250 1.6247 1.9950 1.9955
GB-28 1.7500 2.1250 1.7500 1.7497 2.1200 2.1205
GB-30 1.8750 2.2500 1.8750 1.8747 2.2450 2.2455
GB-32 2.0000 2.3750 2.0000 1.9997 2.3700 2.3705
GBH-33 2.0625 2.5312 2.0624 2.0621 2.5262 2.5267
GB-34 2.1250 2.5000 2.1249 2.1246 2.4950 2.4955
GB-36 2.2500 2.6250 2.2499 2.2496 2.6200 2.6205
GB-42 2.6250 3.0000 2.6248 2.6245 2.9950 2.9956
GB-44 2.7500 3.1250 2.7498 2.7495 3.1200 3.1206
GB-56 3.5000 4.0000 3.4998 3.4995 3.9950 3.9956
* Check for availability as not every size may be in production.
419
FW D FW
JT JTT
One Seal Two Seals
420
GENERAL NOTES
Sealed drawn cup needle bearings are prepacked with
a general purpose ball and roller bearing grease unless
otherwise specified.
Lip contact seals limit the bearing operating temperature
between -25°F and +225°F. If the operating temperature
must be outside of the above range or if the seals are
exposed to unusual fluids please consult Timken Engineer-
ing. Limiting speed is based on a shaft contact speed of
2000 fpm. For outer ring rotation, reduce the listed limiting S
H
speed by one-half. shaft surface to be
58 HRC or equivalent
421
Shaft Dimensions
Dia. d F B rs min.
inch
min. max. max. min. max. min. inch
3⁄ 16 0.1895 0.1900 0.3750 0.3745 0.536 0.526 0.025
1⁄ 4 0.2495 0.2500 0.4375 0.4370 0.536 0.526 0.025
5⁄ 16 0.3120 0.3125 0.5000 0.4995 0.536 0.526 0.025
3⁄ 8 0.3745 0.3750 0.5625 0.5620 0.515 0.505 0.025
0.3745 0.3750 0.5625 0.5620 0.765 0.755 0.025
0.3745 0.3750 0.5625 0.5620 0.786 0.776 0.025
0.3745 0.3750 0.6250 0.6245 0.515 0.505 0.025
0.3745 0.3750 0.6250 0.6245 0.765 0.755 0.025
7⁄ 16 0.4370 0.4375 0.6250 0.6245 0.786 0.776 0.025
1⁄ 2 0.4995 0.5000 0.7500 0.7495 0.515 0.505 0.040
0.4995 0.5000 0.7500 0.7495 0.765 0.755 0.040
0.4995 0.5000 0.7500 0.7495 0.786 0.776 0.040
5⁄ 8 0.6245 0.6250 0.8750 0.8745 0.765 0.755 0.040
0.6245 0.6250 0.8750 0.8745 0.786 0.776 0.040
0.6245 0.6250 0.8750 0.8745 1.015 1.005 0.040
3⁄ 4 0.7495 0.7500 1.0000 0.9995 0.515 0.505 0.040
0.7495 0.7500 1.0000 0.9995 0.765 0.755 0.040
0.7495 0.7500 1.0000 0.9995 1.015 1.005 0.040
0.7495 0.7500 1.0000 0.9995 1.036 1.026 0.040
0.7495 0.7500 1.0000 0.9995 1.265 1.255 0.040
0.7495 0.7500 1.0000 0.9995 1.515 1.505 0.040
13⁄ 16 0.8120 0.8125 1.0000 0.9995 0.765 0.755 0.040
0.8120 0.8125 1.0000 0.9995 1.015 1.005 0.040
7⁄ 8 0.8745 0.8750 1.1250 1.1245 1.015 1.005 0.040
0.8745 0.8750 1.1250 1.1245 1.036 1.026 0.040
Bore and o.d. tolerance limits correspond to the single mean diameter
(the arithmetical mean of the largest and smallest diameters in a single radial plane).
422
Inner rings for drawn cup bearings are designed to provide a loose
transition fit on the shaft, and should be axially clamped against a
shoulder. If a tight transition fit must be used to keep the inner ring
from rotating relative to the shaft, the inner ring o.d., after being
mounted on the shaft, must not exceed the raceway diameter
required for the matching drawn cup bearing. See tables of bearing
dimensions for the required raceway diameter. In case the o.d. of *ra shaft
the inner ring, when mounted on the shaft, exceeds the required fillet
S
raceway diameter for the matching drawn cup bearing, it should be
ground to proper diameter while mounted on the shaft.
inch inch
max. min. max. min. lbs
IRA-3 0.1897 0.1892 0.1901 0.1896 0.012
IRA-4 0.2497 0.2492 0.2501 0.2496 0.014
IRA-5 0.3122 0.3117 0.3126 0.3121 0.017
IR-68 0.3747 0.3742 0.3751 0.3746 0.019
IR-612
IRA-6
0.3747
0.3747
0.3742
0.3742
0.3751
0.3751
0.3746
0.3746
0.028
0.029
3
IR-68-1 0.3747 0.3742 0.3751 0.3746 0.027
IR-612-1 0.3747 0.3742 0.3751 0.3746 0.040
IRA-7 0.4372 0.4367 0.4376 0.4371 0.033
IR-88 0.4997 0.4992 0.5001 0.4996 0.033
IR-812 0.4997 0.4992 0.5001 0.4996 0.050
IRA-8 0.4997 0.4992 0.5001 0.4996 0.051
IR-1012 0.6247 0.6242 0.6251 0.6246 0.060
IRA-10 0.6247 0.6242 0.6251 0.6246 0.061
IR-1016 0.6247 0.6242 0.6251 0.6246 0.080
IR-128 0.7497 0.7492 0.7501 0.7496 0.047
IR-1212 0.7497 0.7492 0.7501 0.7496 0.070
IR-1216 0.7497 0.7492 0.7501 0.7496 0.093
IRA-12 0.7497 0.7492 0.7501 0.7496 0.095
IR-1220 0.7497 0.7492 0.7501 0.7496 0.116
IR-1224 0.7497 0.7492 0.7501 0.7496 0.139
IR-1312 0.8122 0.8117 0.8126 0.8121 0.054
IR-1316 0.8122 0.8117 0.8126 0.8121 0.072
IR-1416 0.8747 0.8742 0.8751 0.8746 0.106
IRA-14 0.8747 0.8742 0.8751 0.8746 0.108
* ras max is equal to minimum inner ring bore chamfer (rs min). Continued on the next page.
423
Shaft Dimensions
Dia. d F B rs min.
inch
min. max. max. min. max. min. inch
15⁄ 16 0.9370 0.9375 1.1250 1.1245 1.015 1.005 0.040
1 0.9995 1.0000 1.2500 1.2495 0.765 0.755 0.040
0.9995 1.0000 1.2500 1.2495 1.015 1.005 0.040
0.9995 1.0000 1.2500 1.2495 1.036 1.026 0.040
424
Inner rings for drawn cup bearings are designed to provide a loose
transition fit on the shaft, and should be axially clamped against a
shoulder. If a tight transition fit must be used to keep the inner ring
from rotating relative to the shaft, the inner ring o.d., after being
mounted on the shaft, must not exceed the raceway diameter
required for the matching drawn cup bearing. See tables of bearing
dimensions for the required raceway diameter. In case the o.d. of
*ra shaft
the inner ring, when mounted on the shaft, exceeds the required fillet
S
raceway diameter for the matching drawn cup bearing, it should be
ground to proper diameter while mounted on the shaft.
inch inch
max. min. max. min. lbs
IR-1516 0.9372 0.9367 0.9376 0.9371 0.082
IR-1612 0.9997 0.9992 1.0001 0.9996 0.090
IR-1616 0.9997 0.9992 1.0001 0.9996 0.119
IRA-16 0.9997 0.9992 1.0001 0.9996 0.122
IR-1812 1.1247 1.1242 1.1251 1.1246 0.100
IR-1816
IR-1820
1.1247
1.1247
1.1242
1.1242
1.1251
1.1251
1.1246
1.1246
0.133
0.166
3
IR-1916 1.1872 1.1867 1.1876 1.1871 0.178
IR-1920 1.1872 1.1867 1.1876 1.1871 0.223
IR-2016 1.2497 1.2492 1.2501 1.2496 0.146
IR-2020 1.2497 1.2492 1.2501 1.2496 0.182
IRA-20 1.2497 1.2492 1.2501 1.2496 0.185
IR-2220 1.3747 1.3742 1.3751 1.3746 0.199
IR-2316 1.4372 1.4367 1.4376 1.4371 0.212
IR-2324 1.4372 1.4367 1.4376 1.4371 0.317
IR-2416 1.4997 1.4992 1.5001 1.4996 0.173
IR-2424 1.4997 1.4992 1.5001 1.4996 0.258
IR-2724 1.6872 1.6867 1.6876 1.6871 0.447
IR-2824 1.7497 1.7492 1.7501 1.7496 0.379
IR-2916 1.8122 1.8117 1.8126 1.8121 0.206
IR-2924 1.8122 1.8117 1.8126 1.8121 0.308
IR-3024 1.8747 1.8742 1.8751 1.8746 0.319
IR-4016 2.4998 2.4991 2.5002 2.4995 0.279
* ras max. is equal to minimum inner ring bore chamfer (rs min.).
425
WJ - 20 26 16
Bore Outside Diameter
20 = 20⁄16 = 1 1⁄4" 26 = 26⁄16 = 1 5⁄8"
K 24 x 28 x 10 H
Bore diameter Width Suffix
24 = 24 mm 10 = 10 mm BE hardened steel cage (for crankpin position)
49 = 49 mm 38 = 38 mm H hardened steel cage
SE hardened steel cage (for wristpin position)
TN molded cage of reinforced engineered polymer
ZW double row
426
Radial Needle
Roller and Cage
Assemblies
Page Page
NEEDLE ROLLER AND CAGE RADIAL NEEDLE ROLLER AND CAGE RADIAL
ASSEMBLIES – METRIC SERIES ASSEMBLIES – INCH SERIES
Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428 Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 442
Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428 Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 442
Dimensional Accuracy . . . . . . . . . . . . . . . . . . . . . . 429 Dimensional Accuracy . . . . . . . . . . . . . . . . . . . . . . 442
Mounting Dimensions . . . . . . . . . . . . . . . . . . . . . . . 429 Mounting Dimensions . . . . . . . . . . . . . . . . . . . . . . . 442
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 429 Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 443
427
K ... K ... ZW
SUFFIXES
TN molded cage of reinforced engineered polymer
ZW double row
TNZW molded cage of reinforced engineered polymer – double row
H hardened steel cage
CONSTRUCTION
Torrington needle roller and cage radial assemblies have a temperatures up to 120°C over extended periods. However
steel cage which provides both inward and outward retention care should be exercised when these assemblies are
for the needle rollers. The designs provide maximum cage lubricated with oils containing additives as service life may be
strength consistent with the inherent high load ratings of reduced if the operating temperature exceeds 100°C. At such
needle roller bearings. high temperatures oil can deteriorate with time and it is
Accurate guidance of the needle rollers by the cage bars recommended that oil change intervals are observed.
allows for operation at high speeds. Needle roller and cage Needle rollers with relieved ends used in these assem-
assemblies have either one or two rows of needle rollers. blies are made of high carbon chrome steel, through hard-
Also listed are metric series needle roller and cage ened, ground and lapped to close tolerances for diameter and
assemblies using molded, one piece glass reinforced roundness. See the Needle Bearing Engineering section of
engineered polymer cages (suffix TN). These operate well at this catalog for further discussion of relieved end rollers.
428
429
Single Row,
Double Row
Assemblies Fw Ew Fw Ew
Metric Series
Bc Bc
K K.ZW
8 8
8
11
11
8
10
K8x11x8TN
K8x11x10
2,34
4,57
2,05
4,89
27 000
27 000
41 000
41 000
0,001
0,002
8 11 13 K8x11x13H 5,22 5,78 27 000 41 000 0,003
10 10
10
13
13
10
13
K10x13x10TN
K10x13x13
4,29
5,9
4,77
7,16
25 000
25 000
39 000
39 000
0,002
0,004
10 13 16 K10x13x16 7,43 9,64 25 000 39 000 0,004
10 14 10 K10x14x10H 6,12 6,29 20 000 31 000 0,004
10 14 13 K10x14x13H 7,88 8,71 20 000 31 000 0,005
10 14 13,7 K10X14X13,7TN 8,2 9,2 20 000 31 000 0,004
10 16 12 K10x16x12TN 7,5 6,4 16 000 24 000 0,005
17 17
17
20
21
10
10
K17x20x10
K17x21x10
5,96
8,12
8,53
10,4
16 000
17 000
25 000
26 000
0,004
0,005
17 21 13 K17x21x13 10,5 14,5 17 000 26 000 0,008
17 21 17 K17x21x17H 13,4 19,8 17 000 26 000 0,012
430
Single Row,
Double Row
Assemblies Fw Ew Fw Ew
Metric Series
Bc Bc
K K.ZW
431
Single Row,
Double Row
Assemblies Fw Ew Fw Ew
Metric Series
Bc Bc
K K.ZW
35 35
35
40
40
13
17
K35x40x13H
K35x40x17H
16,2
22,1
27,2
40,8
8 000
8 000
12 000
12 000
0,019
0,026
35 40 25 K35x40x25H 28,4 56,2 8 000 12 000 0,034
35 40 27 K35x40x27H 29,8 59,6 8 000 12 000 0,036
35 42 16 K35x42x16 24,5 36,8 8 000 12 000 0,036
35 42 18 K35x42x18 27,5 42,6 8 000 12 000 0,04
35 42 20 K35x42x20H 30,4 48,5 8 000 12 000 0,037
35 42 30 K35x42x30H 40,5 70,0 8 000 12 000 0,062
35 45 20 K35x45x20H 37,5 49,9 8 000 13 000 0,077
35 45 41 K35x45x41 70,8 113,0 8 000 13 000 0,130
35 45 49 K35x45x49HZW 71,8 115,0 8 000 13 000 0,147
35 50 23 K35x50x23H 53,0 60,3 8 000 13 000 0,110
38 38
38
41
43
9
17
K38x41x9TN
K38x43x17H
5,93
21,8
11,0
41,0
7 000
7 000
11 000
11 000
0,004
0,032
38 43 27 K38x43x27 31,9 67,0 7 000 11 000 0,05
38 46 20 K38x46x20 33,3 51,0 8 000 12 000 0,056
38 46 32 K38x46x32H 55,2 98,1 8 000 12 000 0,09
38 50 33 K38x50x33H 68,3 98,2 8 000 12 000 0,132
432
Single Row,
Double Row
Assemblies Fw Ew Fw Ew
Metric Series
Bc Bc
K K.ZW
42 42
42
47
47
13
17
K42x47x13H
K42x47x17H
18,7
22,8
34,9
45,2
6 500
6 500
10 000
10 000
0,023
0,035
42 47 27 K42x47x27H 33,8 74,7 6 500 10 000 0,054
42 47 34 K42x47x34TNZW 36,8 83,6 6 500 10 000 0,039
42 50 20 K42x50x20H 35,2 56,6 6 500 10 000 0,062
43 43
43
48
48
17
27
K43x48x17H
K43x48x27H
22,7
34,8
45,3
78,0
6 500
6 500
9 800
9 800
0,036
0,045
45 45
45
50
50
13
17
K45x50x13H
K45x50x17H
18,4
24,9
35,1
51,8
6 100
6 100
9 400
9 400
0,024
0,032
45 50 27 K45x50x27TN 31,8 70,7 6 100 9 400 0,058
45 52 18 K45x52x18H 30,1 52,0 6 200 9 500 0,052
45 53 20 K45x53x20H 36,0 59,5 6 200 9 600 0,065
45 53 21 K45x53x21 39,0 65,9 6 200 9 600 0,069
45 53 28 K45x53x28H 49,3 89,2 6 200 9 600 0,088
45 59 18 K45x59x18TN 45,7 55,4 6 500 10 000 0,079
45 60 45 K45x60x45H 108,0 160,0 6 500 10 000 0,25 3
46 46 53 36 K46x53x36HZW 48,6 96,7 6 000 9 300 0,1
47 47
47
52
52
17
27
K47x52x17H
K47x52x27H
24,2
36,6
50,4
85,9
5 800
5 800
8 900
8 900
0,034
0,049
49 49
49
55
65
32
38
K49x55x32HZW
K49x65x38H
40,2
100,0
86,4
142,0
5 600
6 000
8 600
9 300
0,08
0,249
50 50
50
55
55
17
20
K50x55x17H
K50x55x20H
25,5
30,2
55,0
68,5
5 500
5 500
8 400
8 400
0,034
0,04
50 55 30 K50x55x30 38,2 92,4 5 500 8 400 0,071
50 56 23 K50x56x23 35,5 74,1 5 500 8 500 0,056
50 58 20 K50x58x20H 38,8 67,8 5 600 8 600 0,072
50 58 25 K50x58x25H 46,5 85,6 5 600 8 600 0,087
50 58 35 K50x58x35H 64,9 131,0 5 600 8 600 0,105
50 62 22 K50x62x22H 55,2 80,6 5 800 8 900 0,102
50 66 30 K50x66x30H 80,9 109,0 5 900 9 100 0,192
50 70 32 K50x70x32H 103,0 129,0 6 000 9 300 0,224
52 52
52
57
57
12
17
K52x57x12
K52x57x17H
16,2
21,4
30,9
44,3
5 200
5 200
8 000
8 000
0,03
0,035
55 55
55
60
60
17
20
K55x60x17
K55x60x20H
26,0
30,7
58,3
72,4
4 900
4 900
7 600
7 600
0,036
0,043
55 60 27 K55x60x27H 40,1 102,0 4 900 7 600 0,062
55 60 30 K55x60x30 40,6 103,0 4 900 7 600 0,078
55 62 18 K55x62x18H 33,2 62,8 5 000 7 700 0,055
55 63 20 K55x63x20 40,3 73,5 5 100 7 800 0,078
55 63 25 K55x63x25 49,8 96,5 5 100 7 800 0,095
55 63 32 K55x63x32 60,6 124,0 5 100 7 800 0,143
58 58
58
64
65
19
18
K58x64x19H
K58x65x18H
32,9
34,4
70,6
67,1
4 700
4 700
7 200
7 300
0,048
0,065
60 60
60
65
65
20
30
K60x65x20H
K60x65x30
31,9
42,9
78,1
114,0
4 500
4 500
6 900
6 900
0,046
0,085
60 66 33 K60x66x33ZW 45,0 107,0 4 500 7 000 0,134
60 68 20 K60x68x20H 41,8 79,2 4 600 7 100 0,084
60 68 23 K60x68x23H 47,8 94,1 4 600 7 100 0,112
60 68 25 K60x68x25 51,6 104,0 4 600 7 100 0,123
60 68 30 K60x68x30ZW 46,4 90,1 4 600 7 100 0,126
60 75 42 K60x75x42H 119,0 195,0 4 800 7 400 0,408
433
Single Row,
Double Row
Assemblies
Fw Ew Fw Ew
Metric Series
Bc Bc
K K.ZW
434
K.BE K.SE
Suffixes
BE steel cage, heat treated, for crank pin position
SE steel cage, heat treated, for wrist pin position
435
CONSTRUCTION
Table 1 – Crank pin and wrist pin diameters, determined by the cylinder displacement of the engine.
Diameter in mm
436
Bc Bc
0,03/100 0,03/100
Bc Bc
5...10
1,7...2
Bc Bc
h8 h8
0,5...1
BcB11 Bc +2
6...10
437
438
Example:
Crank pin diameter 20 mm, tolerance h5
Connecting rod bore diameter 26 mm, tolerance G6
Needle roller and cage assembly Torrington K20x26x12BE
Radial clearance 20 . . . 29 µm
+20
+7
Connecting rod crank pin end bore diameter 26
Tolerances and radial clearances in µm
Example:
Wrist pin diameter 16 mm, tolerance h5
Connecting rod bore diameter 20 mm, tolerance K6
Needle roller and cage assembly Torrington K16x20x20SE
Radial clearance 2 . . . 12 µm
+2
-11
Wrist pin end bore diameter 20
Tolerances and radial clearances in µm
-6 -2 +2
-11 -6 -2
Needle roller Radial Needle roller Radial Needle roller Radial
Tolerance clearance Tolerance clearance Tolerance clearance
0 -4 -5 2...11 -2 -3 2...11
-3 -6 -7 -4 -5
Wrist pin -3 -5 2...10 -3 -4 3...12 -1 -2 3...12
diameter -6 -7 -5 -6 -3 -4
0
16 -8 -6 -4 -5 3...12 -1 -2 2...10 0 4...10
-8 -6 -7 -3 -4 -2
439
Bc
K.BE
440
Lw
Assemblies for Wrist Pin End
Applications – Metric Series
Fw Ew
Bc
K.SE
14
15
14
15
18
19
17
20
11,8
15,8
K14x18x17SE
K15x19x20SE
8,59
10,8
10,5
14,3
0,01
0,012
3
16 16 20 20 15,8 K16x20x20SE 12,0 16,9 0,013
16 20 23 15,8 K16x20x23SE 10,7 14,5 0,011
441
WJ WJC
There are two primary constructions of inch series needle roller DIMENSIONAL ACCURACY
and cage assemblies. The WJ assemblies generally employ The nominal inch assemblies, WJ and WJC, contain needle
larger diameter needle rollers whereas the WJC assemblies rollers manufactured to only one diameter grade. Within any
normally employ smaller diameter needle rollers. one assembly, the needle rollers have a total diameter toler-
ance of .0001 inch.
CONSTRUCTION The limit to precision of the radial clearance of mounted
Torrington needle roller and cage radial assemblies have a needle roller and cage assemblies is the capability of the user
steel cage which provides both inward and outward retention to hold close tolerances on the inner and outer raceways.
for the needle rollers. The designs provide maximum cage The tolerance of the overall width of these assemblies is
strength consistent with the inherent high load ratings of needle given on the tabular pages of this section.
roller bearings.
Accurate guidance of the needle rollers by the cage bars MOUNTING DIMENSIONS
allows for operation at high speeds. Needle roller and cage The cage and needle roller assembly normally uses the shaft
assemblies have either one or two rows of needle rollers. and housing as the inner and outer raceways, respectively. In
Also available (on request) are needle roller and cage order to realize full bearing load rating and life, the shaft and
assemblies using molded, one piece glass reinforced engi- housing must have the correct geometric and metallurgical
neered polymer cages. These operate well at temperatures up characteristics.
to 250°F (120°C) over extended periods. However, care The tables of dimensions for these assemblies list the
should be exercised when bearings are lubricated with oils recommended diameters for the shaft when used as the inner
containing additives as service life may be reduced if the raceway. These are consistent with ISO h5 shaft raceway
operating temperature exceeds 212°F (100°C). At such high tolerances. Additional design details for shafts used as inner
temperatures oil can deteriorate with time and it is recom- raceways can be found in the Needle Bearing Engineering
mended that oil change intervals are observed. section of this catalog.
Needle rollers with relieved ends used in these assemblies Since the housing normally serves as the outer raceway, it
are made of high carbon chrome steel, through hardened, should be of sufficient cross section to maintain adequate
ground and lapped to close tolerances for diameter and roundness and running clearance under load. The tables of
roundness. See the Needle Bearing Engineering section of dimensions also list the recommended diameters for the
this catalog for further discussion of relieved end rollers. housings when used as outer raceways. These are consistent
with ISO G6 housing bore tolerances. Additional design details
for housings used as outer raceways can be found in the
Needle Bearing Engineering section of this catalog.
442
The recommended mounting diameter tolerances for these forces, such as in epicyclic gearing, or inertia forces, as in
needle roller and cage assemblies will provide correct running the small end of a connecting rod, the contact pressure
clearance for most applications. between the cage and the raceway guiding surface becomes
The needle roller and cage assembly must be axially critical. The allowable contact pressure depends on a
located by shoulders or other suitable means. End locating combination of the induced force and the rubbing velocity
surfaces should be hardened to minimize wear. For satisfac- between the cage and the raceway and the rate of lubricant
tory operation, minimum axial clearance should be 0.008 inch. flow. Consult Timken Engineering when cages will be
When using type WJ assembly, fillets adjacent to the assembly subjected to high induced forces.
must not exceed 0.03 inch radius. When it is necessary to use
fillets adjacent to WJC assembly, please consult Timken SPECIAL DESIGNS
Engineering for recommendations. Needle roller and cage assemblies made to special dimen-
sions or configurations, such as those which are split to
LUBRICATION assemble around a one-piece crankshaft, can be made
Oil is the preferred lubricant for most applications. In critical available on special order where quantities permit. Special
applications involving high speeds, ample oil flow must be plated cages to enhance life under conditions of high induced
provided. Where assemblies are subjected to high centrifugal forces can also be made available.
443
BC
Single Row
Assemblies – raceway surfaces to be
Inch Series 58 HRC or equivalent
E FW S
H
WJ and WJC
444
Single Row BC
Assemblies –
raceway surfaces to be
Inch Series 58 HRC or equivalent
(continued) EW FW S
H
WJ and WJC
2 1⁄ 16 2.0625 2.4375 1.000 WJ-333916 13 000 23 100 5 400 8 300 2.0625 2.0620 2.4379 2.4386 .218
2 1⁄ 8 2.1250 2.5000 1.000 WJ-344016 11 800 20 700 5 200 8 000 2.1250 2.1245 2.5004 2.5011 .220
2.1250 2.5000 1.500 WJ-344024 17 600 34 500 5 200 8 000 2.1250 2.1245 2.5004 2.5011 .365
2 3 ⁄ 16 2.1875 2.5625 .750 WJ-354112 10 000 16 900 5 000 7 800 2.1875 2.1870 2.5629 2.5636 .187
2.1875 2.5625 1.000 WJ-354116 13 000 24 100 5 000 7 800 2.1875 2.1870 2.5629 2.5636 .227
2 1⁄ 4 2.2500 2.6250 1.000 WJ-364216 12 100 21 600 4 900 7 500 2.2500 2.2495 2.6254 2.6261 .233
2 3⁄ 8
2.2500
2.3750
2.6250
2.7500
1.250
1.500
WJ-364220
WJ-384424
15 200
18 300
28 900
37 600
4 900
4 600
7 500
7 100
2.2500
2.3750
2.2495
2.3745
2.6254
2.7504
2.6261
2.7511
.291
.409
3
2 1⁄ 2 2.5000 2.8750 1.000 WJ-404616 12 500 23 400 4 400 6 700 2.5000 2.4995 2.8754 2.8761 .301
2.5000 2.8750 1.250 WJ-404620 15 700 31 400 4 400 6 700 2.5000 2.4995 2.8754 2.8761 .353
2.5000 2.8750 1.500 WJ-404624 18 700 39 100 4 400 6 700 2.5000 2.4995 2.8754 2.8761 .396
2 3⁄4 2.7500 3.1250 1.000 WJ-445016 13 000 25 300 4 000 6 100 2.7500 2.7495 3.1254 3.1261 .277
3 3.0000 3.3750 1.000 WJ-485416 13 400 27 100 3 600 5 600 3.0000 2.9995 3.3755 3.3764 .352
3.0000 3.3750 1.500 WJ-485424 19 200 43 100 3 600 5 600 3.0000 2.9995 3.3755 3.3764 .469
3 1⁄4 3.2500 3.6250 1.000 WJ-525816 13 800 28 900 3 300 5 100 3.2500 3.2494 3.6255 3.6264 .323
3.2500 3.6250 1.500 WJ-525824 19 800 46 000 3 300 5 100 3.2500 3.2494 3.6255 3.6264 .486
3 1⁄ 2 3.5000 3.8750 1.000 WJ-566216 14 200 30 700 3 100 4 700 3.5000 3.4994 3.8755 3.8764 .383
3.5000 4.0000 1.000 WJ-566416 17 900 33 800 3 100 4 800 3.5000 3.4994 4.0005 4.0014 .473
3.5000 4.0000 1.500 WJ-566424 25 600 53 400 3 100 4 800 3.5000 3.4994 4.0005 4.0014 .792
4 4.0000 4.5000 1.000 WJ-647216 18 800 37 450 2 700 4 200 4.0000 3.9994 4.5005 4.5014 .528
4.0000 4.5000 1.500 WJ-647224 26 800 59 200 2 700 4 200 4.0000 3.9994 4.5005 4.5014 .814
5 5.0000 6.0000 1.500 WJ-809624 47 600 82 100 2 200 3 400 5.0000 4.9993 6.0006 6.0015 2.244
Load Ratings are based on a minimum raceway hardness of 58 HRC or equivalent.
Minimum axial clearance should be .008 inches.
445
HJ - 16 24 12 2RS
Bore Width
16 = 16⁄16 = 1" 12 = 12⁄16 = 3⁄4"
80 = 80⁄16 = 5" 36 = 36⁄16 = 2 1⁄4"
I R - 10 14 16
Bore Width
10 = 10⁄16 = 5⁄8" 16 = 16⁄16 = 1"
64 = 64⁄16 = 4" 36 = 36⁄16 = 2 1⁄4"
446
Heavy Duty
Needle Roller
Bearings
Page Page
NEEDLE ROLLER BEARINGS – INCH SERIES NEEDLE ROLLER BEARINGS – METRIC SERIES
Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 448 Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 464
Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 448 Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 465
Lubrication, Load Ratings Factors . . . . . . . . . . . . . . 451 Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 466
447
IDENTIFICATION
HJ IR HJ – .2RS
The prefix letters HJ in the needle roller bearing designa- shaft as the inner raceway. These inch series inner rings are
tion denote that the bearing is manufactured to inch nominal identified by the prefix letters IR.
dimensions.
Bearings are available with one or two lip contact seals as Since the entire identification code may not appear on the
listed on pages 456 and 457. One seal is designated by suffix bearing itself, the manufacturer’s parts list or another reliable
letters RS. Two seals are designated by .2RS. source should always be consulted when ordering bearings for
Inner rings can be used with HJ series needle roller service or field replacement, to make certain that the correct
bearings for applications where it is impractical to use the bearing with the correct lubricant is used.
CONSTRUCTION
The Timken Torrington HJ series needle roller bearing has a
one-piece channel-shaped outer ring of bearing quality steel,
heat treated to provide maximum load rating. The integral end
flanges provide axial location for the needle rollers. The bores
One Piece Channel-Shaped, Outer Ring
of the end flanges serve as piloting surfaces for the cage,
locating it to prevent removal of the lubricant film on the
raceway.
These bearings have a steel cage which provides inward
retention for the needle rollers. The design assures roller
stability and minimizes friction between the cage and the
needle rollers. The cage has a maximum strength consistent
with the inherent high load ratings of needle roller bearings.
The needle rollers are made from high carbon chrome
steel, through-hardened, ground and lapped to close tolerance
with Controlled Contour for optimum load distribution.
448
449
450
451
r
HJ HJ with IR
452
0.8750 0.8745 1.3750 1.3760 HJ-142216 0.8742 0.8737 1.3737 1.3747 1.188
1.0000 0.9995 1.5000 1.5010 HJ-162412 0.9992 0.9987 1.4987 1.4997 1.312
1.0000 0.9995 1.5000 1.5010 HJ-162416 0.9992 0.9987 1.4987 1.4997 1.312
1.1250 1.1245 1.6250 1.6260 HJ-182616 1.1242 1.1237 1.6237 1.6247 1.438
1.1250 1.1245 1.6250 1.6260 HJ-182620 1.1242 1.1237 1.6237 1.6247 1.438 3
1.2500 1.2494 1.7500 1.7510 HJ-202816 1.2490 1.2484 1.7487 1.7497 1.562
1.2500 1.2494 1.7500 1.7510 HJ-202820 1.2490 1.2484 1.7487 1.7497 1.562
1.3750 1.3744 1.8750 1.8760 HJ-223016 1.3740 1.3734 1.8737 1.8747 1.688
1.3750 1.3744 1.8750 1.8760 HJ-223020 1.3740 1.3734 1.8737 1.8747 1.688
1.5000 1.4994 2.0625 2.0637 HJ-243316 1.4990 1.4984 2.0610 2.0622 1.875
1.5000 1.4994 2.0625 2.0637 HJ-243320 1.4990 1.4984 2.0610 2.0622 1.875
1.6250 1.6244 2.1875 2.1887 HJ-263516 1.6240 1.6234 2.1860 2.1872 2.000
1.6250 1.6244 2.1875 2.1887 HJ-263520 1.6240 1.6234 2.1860 2.1872 2.000
1.7500 1.7494 2.3125 2.3137 HJ-283716 1.7490 1.7484 2.3110 2.3122 2.125
1.7500 1.7494 2.3125 2.3137 HJ-283720 1.7490 1.7484 2.3110 2.3122 2.125
1.8750 1.8744 2.4375 2.4387 HJ-303920 1.8740 1.8734 2.4360 2.4372 2.250
2.0000 1.9993 2.5625 2.5637 HJ-324116 1.9988 1.9981 2.5610 2.5622 2.375
2.0000 1.9993 2.5625 2.5637 HJ-324120 1.9988 1.9981 2.5610 2.5622 2.375
2.2500 2.2493 3.0000 3.0012 HJ-364824 2.2488 2.2481 2.9985 2.9997 2.688
2.2500 2.2493 3.0000 3.0012 HJ-364828 2.2488 2.2481 2.9985 2.9997 2.688
2.5000 2.4993 3.2500 3.2514 HJ-405224 2.4988 2.4981 3.2481 3.2495 2.938
2.5000 2.4993 3.2500 3.2514 HJ-405228 2.4988 2.4981 3.2481 3.2495 2.938
2.7500 2.7493 3.5000 3.5014 HJ-445616 2.7488 2.7481 3.4981 3.4995 3.188
2.7500 2.7493 3.5000 3.5014 HJ-445624 2.7488 2.7481 3.4981 3.4995 3.188
2.7500 2.7493 3.5000 3.5014 HJ-445628 2.7488 2.7481 3.4981 3.4995 3.188
* ras max is equal to the minimum bearing chamfer (rs min) at unmarked end.
453
r
HJ HJ with IR
†See pages 458-461 for inch series inner rings. Order inner rings separately.
454
3.2500 3.2491 4.2500 4.2514 HJ-526828 3.2486 3.2477 4.2481 4.2495 3.875
3.2500 3.2491 4.2500 4.2514 HJ-526832 3.2486 3.2477 4.2481 4.2495 3.875
3.5000 3.4991 4.5000 4.5014 HJ-567232 3.4986 3.4977 4.4981 4.4995 4.125 3
3.7500 3.7491 4.7500 4.7516 HJ-607632 3.7487 3.7477 4.7478 4.7494
455
1 3⁄ 4 1.7500 2.3125 1.250 0.06 HJ-283720RS HJ-283720.2RS IR-222820 11 200 18 200 2 200 0.49
IR-232820
IR-242820
2 2.0000 2.5625 1.250 0.06 HJ-324120RS HJ-324120.2RS IR-243220 12 100 20 900 1 900 0.55
IR-253220
IR-263220
IR-273220
2 1⁄ 4 2.2500 3.0000 1.750 0.06 HJ-364828RS HJ-364828.2RS IR-283628 20 200 36 900 1 700 1.17
2 1⁄ 2 2.5000 3.2500 1.750 0.08 HJ-405228RS HJ-405228.2RS IR-222620 21 800 42 100 1 500 1.29
IR-314028
IR-324028
2 3⁄ 4 2.7500 3.5000 1.750 0.08 HJ-445628RS HJ-445628.2RS IR-354428 22 700 45 700 1 400 1.40
IR-364428
3 3.0000 3.7500 1.750 0.08 HJ-486028RS HJ-486028.2RS IR-384828 24 100 50 900 1 300 1.51
IR-404828
† See pages 458-461 for inch series inner rings. Order inner rings separately.
§ Based on standard seal shaft contact speed of 1000 ft.⁄min.
456
1.1250 1.1245 1.6250 1.6260 -182620 1.1242 1.1237 1.6237 1.6247 1.438 3
1.2500 1.2494 1.7500 1.7510 -202820 1.2490 1.2484 1.7487 1.7497 1.562
1.3750 1.3744 1.8750 1.8760 -223020 1.3740 1.3734 1.8737 1.8747 1.688
1.5000 1.4994 2.0625 2.0637 -243320 1.4990 1.4984 2.0610 2.0622 1.875
1.6250 1.6244 2.1875 2.1887 -263520 1.6240 1.6234 2.1860 2.1872 2.000
1.7500 1.7494 2.3125 2.3137 -283720 1.7490 1.7484 2.3110 2.3122 2.125
2.0000 1.9993 2.5625 2.5637 -324120 1.9988 1.9981 2.5610 2.5622 2.375
2.2500 2.2493 3.0000 3.0012 -364828 2.2488 2.2481 2.9985 2.9997 2.688
2.5000 2.4993 3.2500 3.2514 -405228 2.4988 2.4981 3.2481 3.2495 2.938
2.7500 2.7493 3.5000 3.5014 -445628 2.7488 2.7481 3.4981 3.4995 3.188
3.0000 2.9993 3.7500 3.7514 -486028 2.9988 2.9981 3.7481 3.7495 3.438
* ras max is equal to the minimum bearing chamfer (rs min) at unmarked end.
457
inch
3⁄ 8 0.3750 0.6250 0.750 0.025 IR-061012 HJ-101812
1⁄ 2 0.5000 0.7500 0.750 0.04 IR-081212 HJ-122012
0.5000 0.7500 1.000 0.04 IR-081216 HJ-122016
5⁄ 8 0.6250 0.8750 0.750 0.04 IR-101412 HJ-142212
0.6250 0.8750 1.000 0.04 IR-101416 HJ-142216
11⁄ 16 0.6875 0.8750 0.750 0.04 IR-111412 HJ-142212
3⁄ 4 0.7500 1.0000 0.750 0.04 IR-121612 HJ-162412
0.7500 1.0000 1.000 0.04 IR-121616 HJ-162416
13 ⁄ 16 0.8125 1.0000 1.000 0.04 IR-131616 HJ-162416
7⁄ 8 0.8750 1.1250 1.000 0.04 IR-141816 HJ-182616
0.8750 1.1250 1.250 0.04 IR-141820 HJ-182620
15 ⁄ 16 0.9375 1.1250 1.000 0.04 IR-151816 HJ-182616
0.9375 1.1250 1.250 0.04 IR-151820 HJ-182620
458
S S Mass
Loose Transition Fit Inner Ring Interference Fit Approx.
Shaft Diameter Designation Shaft Diameter
inches inches
max. min. max. min. lbs.
0.3748 0.3744 IR-061012 0.3755 0.3752 0.04
0.4997 0.4993 IR-081212 0.5006 0.5003 0.05
0.4997 0.4993 IR-081216 0.5006 0.5003 0.07
0.6247 0.6243 IR-101412 0.6256 0.6253 0.06
0.6247 0.6243 IR-101416 0.6256 0.6253 0.08
0.6872 0.6868 IR-111412 0.6881 0.6878 0.05
0.7497 0.7492 IR-121612 0.7507 0.7503 0.07
0.7497 0.7492 IR-121616 0.7507 0.7503 0.09
0.8122 0.8117 IR-131616 0.8132 0.8128 0.07
0.8747 0.8742 IR-141816 0.8757 0.8753 0.11
0.8747
0.9372
0.8742
0.9367
IR-141820
IR-151816
0.8757
0.9382
0.8753
0.9378
0.13
0.08
3
0.9372 0.9367 IR-151820 0.9382 0.9378 0.10
0.9997 0.9992 IR-162016 1.0007 1.0003 0.12
0.9997 0.9992 IR-162020 1.0007 1.0003 0.15
1.1247 1.1242 IR-182216 1.1257 1.1253 0.13
1.1247 1.1242 IR-182220 1.1257 1.1253 0.17
1.1872 1.1867 IR-192420 1.1882 1.1878 0.22
1.2496 1.2490 IR-202416 1.2508 1.2504 0.15
1.2496 1.2490 IR-202420 1.2508 1.2504 0.18
1.3121 1.3115 IR-212616 1.3133 1.3129 0.19
1.3121 1.3115 IR-212620 1.3133 1.3129 0.24
1.3746 1.3740 IR-222620 1.3758 1.3754 0.20
1.3746 1.3740 IR-222820 1.3758 1.3754 0.31
1.4371 1.4365 IR-232816 1.4383 1.4379 0.21
1.4371 1.4365 IR-232820 1.4383 1.4379 0.26
1.4996 1.4990 IR-242816 1.5008 1.5004 0.17
1.4996 1.4990 IR-242820 1.5008 1.5004 0.21
1.4996 1.4990 IR-243220 1.5008 1.5004 0.46
1.5621 1.5615 IR-253020 1.5633 1.5629 0.28
1.5621 1.5615 IR-253220 1.5633 1.5629 0.41
1.6246 1.6240 IR-263220 1.6258 1.6254 0.36
1.6871 1.6865 IR-273216 1.6883 1.6879 0.24
1.6871 1.6865 IR-273220 1.6883 1.6879 0.30
1.7496 1.7490 IR-283624 1.7508 1.7504 0.63
1.7496 1.7490 IR-283628 1.7508 1.7504 0.74
1.9371 1.9365 IR-314024 1.9383 1.9379 0.79
1.9371 1.9365 IR-314028 1.9383 1.9379 0.92
* ras max is equal to the minimum inner ring chamfer (rs min) at unmarked end.
459
460
S S Mass
Loose Transition Fit Inner Ring Interference Fit Approx.
Shaft Diameter Designation Shaft Diameter
inches inches
max. min. max. min. lbs.
1.9996 1.9989 IR-324024 2.0009 2.0004 0.71
1.9996 1.9989 IR-324028 2.0009 2.0004 0.83
2.1871 2.1864 IR-354428 2.1884 2.1879 1.03
2.2496 2.2489 IR-364424 2.2509 2.2504 0.79
2.2496 2.2489 IR-364428 2.2509 2.2504 0.92
2.3746 2.3739 IR-384828 2.3759 2.3754 1.24
2.4996 2.4989 IR-404824 2.5009 2.5004 0.87
2.4996 2.4989 IR-404828 2.5009 2.5004 1.02
2.7496 2.7489 IR-445228 2.7509 2.7504 1.11 3
2.7496 2.7489 IR-445232 2.7509 2.7504 1.27
2.9371 2.9364 IR-475632 2.9384 2.9379 1.53
2.9996 2.9989 IR-485632 3.0009 3.0004 1.37
3.1246 3.1239 IR-506032 3.1259 3.1254
3.2495 3.2487 IR-526032 3.2511 3.2505
3.2495 3.2487 IR-526432 3.2511 3.2505
3.3745 3.3737 IR-546432 3.3761 3.3755
3.4995 3.4987 IR-566432 3.5011 3.5005
3.4995 3.4987 IR-566832 3.5011 3.5005
3.7495 3.7487 IR-606832 3.7511 3.7505
3.7495 3.7487 IR-607236 3.7511 3.7505
3.7495 3.7487 IR-607240 3.7511 3.7505
3.9995 3.9987 IR-648036 4.0011 4.0005
3.9995 3.9987 IR-648040 4.0011 4.0005
4.2495 4.2487 IR-688036 4.2511 4.2505
4.4995 4.4987 IR-728840 4.5011 4.5005
4.4995 4.4987 IR-728848 4.5011 4.5005
4.7494 4.7485 IR-769248 4.7513 4.7506
4.9994 4.9985 IR-809640 5.0013 5.0006
4.9994 4.9985 IR-809648 5.0013 5.0006
5.4994 5.4985 IR-8810440 5.5013 5.5006
5.4994 5.4985 IR-8810448 5.5013 5.5006
5.9994 5.9985 IR-9611648 6.0013 6.0006
6.4994 6.4985 IR-10412448 6.5013 6.5006
6.9994 6.9985 IR-11213248 7.0013 7.0006
7.4994 7.4982 IR-12014048 7.5014 7.5006
7.9994 7.9982 IR-12814848 8.0014 8.0006
* ras max is equal to the minimum inner ring chamfer (rs min) at unmarked end.
461
NA 49 04 .2RS
Suffix
NA 69 / 22 RS lip contact seal
on one side
.2RS lip contact seal
on both sides
TN molded cage of
Prefix
reinforced polymer
NA needle roller bearing
with inner ring
NKJ needle roller bearing
with inner ring
NKJS needle roller bearing
with inner ring
NKJ 7 / 16 TN
NAO needle roller bearing
with inner ring,
without flanges
Inner Ring Bearing Width
Bore Diameter (for NKJ, NAO)
(for NA49/, NA69/, 16 = 16mm
NKJ, NKJS, NAO) 17 = 17mm
7 = 7mm
22 = 22mm
30 = 30mm
NAO 30 x 45 x 17
Outer Ring Diameter
45 = 45mm
462
RNAO 35 x 45 x 17
Outer Ring Diameter
45 = 45mm
JRZ 25 x 30 x 18 JS1
Outside Diameter Suffix
30 = 30mm JS1 Lubrication hole
463
Sealed needle roller bearings with inner rings Sealed needle roller bearings without inner rings
464
Needle roller bearings without flanges, Needle roller bearings without flanges,
with inner rings without inner rings
SUFFIXES
RS one seal
.2RS two seals
TN molded cage of engineered reinforced polymer
465
Metric series needle roller bearings with integral One seal is designated by suffix letters RS. Two seals are
flanges designated by .2RS. When combining sealed metric series
The Timken Torrington needle roller bearing has a one-piece needle roller bearings with inner rings it is recommended to
channel-shaped outer ring of bearing quality steel, heat treated use inner rings shown on page 482 with designation JRZ
to yield maximum load rating. The integral end flanges provide because they are wider than the outer rings to ensure positive
axial location for the needle rollers. The bores of the end seal contact.
flanges serve as piloting surfaces for the cage. These seals limit the bearing operating temperature
A steel cage provides inward retention for the needle between -30°C and 110°C. If the operating temperature must
rollers and the design assures roller stability and minimizes be outside the above range or if the seals are exposed to
friction between the cage and the needle rollers. The cage has unusual fluids, external seals using suitable seal materials or
maximum strength consistent with the inherent high load other solutions should be investigated. Sealed bearings are
ratings of needle roller bearings. normally packed with a high quality lithium soap base grease
Needle roller bearings of series NKJ, NKJS, NA48, and suitable up to 120°C for short periods of operation.
NA49 contain one needle roller and cage assembly, bearings The limiting speeds specified for sealed bearings listed in
of series NA69 with bearing bores of 32 mm and above have the bearing tables are based on operating conditions deter-
two needle roller and cage assemblies. mined by testing. Optimum performance may be expected
The outer ring has a lubricating groove and a lubricating providing the bearing is properly installed, with appropriate
hole for more convenient lubrication of the bearing. However, internal clearances, and be subjected to a load of low magni-
the smaller bearings of series NKJ and NK do not have a tude. Care should be taken that overheating will not occur,
lubricating groove or a lubricating hole. (Fw < 10 mm) thus preventing breakdown of the grease and eventual bearing
failure.
Metric series needle roller bearings with inserted
end washers BEARING MOUNTING
Some metric series needle roller bearings have inserted end Mounting dimensions
washers to provide axial retention of the needle roller and cage It is recommended that needle roller bearings are mounted in
assembly. The needle roller and cage radial assemblies, their housings with a clearance fit if the load is stationary
consistent with other Torrington designs, provide inward and relative to the housing, or with a tight transition fit if the load
outward retention for the needle rollers. rotates relative to the housing. Table 2 lists the recommended
tolerances for the housing bore and the shaft raceway for
Metric series needle roller bearings without flanges metric series bearings without inner rings. Table 3 lists the
The needle roller and cage radial assembly used in Torrington recommended shaft tolerances for the above two mounting
metric series needle roller bearings without flanges is slightly conditions when the metric series bearings are used with inner
narrower than the inner and outer rings to ensure unobstructed rings. The recommended housing bore tolerances for metric
operation. Separate end washers are required to provide axial series bearings with inner rings is the same as the housing
retention of the needle roller and cage radial assembly. Wide bore tolerance listed in Table 2 for metric series bearings
needle roller bearings using two needle roller and cage without inner rings. Other quality requirements for shafts and
assemblies have a lubricating groove and one lubricating hole housings are given in the Needle Bearing Engineering section
in the outer ring to facilitate relubrication of the bearing. of this catalog.
Narrow needle roller bearings do not have a lubricating groove Other mounting dimensions may be required for special
or a lubricating hole in the outer ring. operating conditions such as:
1. Extremely heavy radial loads
Sealed metric series needle roller bearings of
2. Shock loads
dimension series 49
Torrington needle roller bearings of series 49 are available with 3. Temperature gradient across bearing
one or two integral lip contact seals as listed on page 476. 4. Housing material with heat expansion coefficient
different than that of the bearing
466
Table 2 – Mounting Tolerances For Metric Series Regardless of the fit of the bearing outer ring in the housing,
Bearings Without Inner Ring the outer ring should be axially located by housing shoulders
Rotation Nominal ISO tolerance Nominal shaft ISO tolerance
or other positive means. The bearing rings should closely fit
conditions housing zone for diameter F zone for against the shaft and housing shoulders and must not contact
bore diameter D housing shaft the fillet radius. In fact, the maximum shaft or housing fillet
mm mm ras max should be no greater than the minimum bearing
Load all diameters H7 all diameters h6 chamfer rs min as shown in Table 4.
stationary (J7)
relative to
housing
In order to permit mounting and dismounting of the shaft, the
maximum diameter D1 in Table 5 must not be exceeded. Fw
General all diameters K7 all diameters g6
work with
is shown in the bearing tables.
larger
clearance Table 5 – Shoulder diameter D1max for Metric Series
Load all diameters N7 all diameters f6 Bearings
rotates Dimensions in mm
relative to
housing Needle roller
NOTE: Care should be taken that the selected bearing internal complement > 20 55 100 250
clearance is appropriate for the operating conditions. bore diameter ≤ 20 55 100 250
Details of shaft and housing quality requirements are given on pages Fw
E115 and E116. Diameter D1max Fw -0,3 Fw -0,5 Fw -0,7 Fw -1 Fw -1,5
Table 4 – Fillets, undercuts, and shoulder heights P = The maximum dynamic radial load that may be applied to
For Metric Series Bearings a needle roller bearing based on the dynamic load rating C
b
r ra r
ra2 given in the tabular pages. This load should be < C/3.
t
r h r h
Static loads
Needle roller bearings can accommodate only radial loads.
r h r h
ra
t
ra2 P0 = Fr (kN)
r r
F D1 F b D1
Mounting in sets
Needle roller bearings which are mounted side by side or
must have the same cross-section and radial internal clear-
ances, after mounting.
rs ras t ra2s b h
min max min min
mm
0,15 0,15 0,6
0,3 0,3 1
0,6 0,6 2
1 1 0,2 1,3 2 2,5
1,1 1 0,3 2 3 3,25
1,5 1,5 0,4 2 3,2 4
2 2 0,5 2,5 4 5
2,1 2,1 0,5 3 4,7 5,5
3 2,5 0,5 3,5 5,3 6
467
Table 6 – Mounting dimensions for metric series needle roller bearings without flanges
D F D2 D F D3 D 5
D d D1 D 2 D d D3 D 5
468
r r s
Fw d D Fw d D
B B
NKJ NKJ, NKJS
(d ≤ 7) NA49, NA69
469
Fw d D Fw d D
B B
60 60
60
82
82
25
35
68
68
0,6
0,6
2
2,5
NKJ60/25
NKJ60/35
49
66,2
101
149
4 000
4 000
6 200
6 200
0,44
0,52
60 85 25 68 1 1,5 NA4912 64,8 116 4 100 6 300 0,457
60 85 45 68 1 2 NA6912 99,3 189 4 100 6 400 0,829
60 90 28 70 1,1 1,5 NKJS60 72,6 120 4 000 6 200 0,607
65 65
65
90
90
25
25
73
72
0,6
1
2
1,5
NKJ65/25
NA4913
61,5
66
119
121
3 800
3 900
5 800
5 900
0,5
0,489
65 90 35 73 0,6 2 NKJ65/35 82,5 173 3 800 5 800 0,69
65 90 45 72 1 2 NA6913 107 213 3 900 6 000 0,945
65 95 28 75 1,1 1,5 NKJS65 76,5 132 3 700 5 800 0,655
1) Max. axial displacement
470
Fw d D Fw d D
B B
NKJ, NKJS, NA48, NA69
NA49, NA69 (d ≥ 32mm)
75 75
75
105
105
25
30
85
85
1
1
2
2,5
NKJ75/25
NA4915
76,4
92,4
137
175
3 300
3 300
5 000
5 000
0,64
0,817
75 105 35 85 1 2 NKJ75/35 108 214 3 300 5 000 1,05
75 105 54 85 1 2 NA6915 143 308 3 300 5 000 1,55
95 95
95
125
125
26
36
105
105
1
1
2,5
3,5
NKJ95/26
NKJ95/36
52,2
72,8
127
195
2 600
2 600
3 900
3 900
0,935
1,3
95 130 35 110 1,1 2,5 NA4919 115 253 2 500 3 800 1,43
95 130 63 110 1,1 2 NA6919 158 458 2 500 3 800 2,67
100 100 130 30 110 1,1 2 NKJ100/30 103 220 2 500 3 800 0,984
100 130 40 110 1,1 3 NKJ100/40 132 301 2 500 3 800 1,41
100 135 32 115 1,1 2 NKJS100 104 226 2 400 3 700 1,34
100 140 40 115 1,1 3,5 NA4920 139 296 2 400 3 700 2,01
110 110 140 30 120 1 0,5 NA4822 90,3 230 2 300 3 500 1,21
110 150 40 125 1,1 3,5 NA4922 147 325 2 200 3 400 2,19
120 120 150 30 130 1 0,5 NA4824 94,2 249 2 100 3 200 1,31
120 165 45 135 1,1 3,5 NA4924 177 407 2 000 3 100 3,04
130 130 165 35 145 1,1 1 NA4826 112 323 1 900 2 900 1,99
130 180 50 150 1,5 3 NA4926 201 495 1 800 2 800 4,14
140 140 175 35 155 1,1 1 NA4828 115 346 1 700 2 700 2,12
140 190 50 160 1,5 3 NA4928 214 549 1 700 2 600 4,41
150 150 190 40 165 1,1 2 NA4830 142 402 1 600 2 500 2,7
160 160 200 40 175 1,1 2 NA4832 146 425 1 500 2 400 3,15
1) Max. axial displacement
471
Fw D Fw D Fw D
C C C
NK NK, NKS NKTN
(Fw ≤ 10) RNA49, RNA69
472
Fw D Fw D
C C
NK, NKS RNA69
RNA49, RNA69 (Fw ≥ 40)
26 26
26
34
34
16
20
0,3
0,3
NK26/16
NK26/20
16,6
19,7
25,7
32
11 000
11 000
17 000
17 000
0,039
0,048
3
28 28 37 20 0,3 NK28/20 22,6 34,4 10 000 16 000 0,057
28 37 30 0,3 NK28/30 29 53,8 10 000 15 000 0,088
28 39 17 0,3 RNA49/22 23,3 29,6 10 000 16 000 0,059
28 39 30 0,3 RNA69/22 30,6 50,7 10 000 16 000 0,107
28 42 20 0,6 NKS28 30,3 38,4 11 000 16 000 0,094
473
r r
Needle Roller Bearings
without Inner Rings –
Metric Series Fw D Fw D
C C
NK, NKS RNA69
RNA49 (Fw ≥ 40)
474
r r
Needle Roller Bearings
without Inner Rings –
Metric Series Fw D Fw D
C C
NK, NKS RNA69
RNA48, RNA49 (Fw ≥ 40)
110 110 130 30 1,1 NK110/30 103 220 2 500 3 800 0,6
110 130 35 1,1 RNA4919 115 253 2 500 3 800 0,777
110 130 40 1,1 NK110/40 132 132 2 500 3 800 0,9
110 130 63 1,1 RNA6919 158 458 2 500 3 800 1,47
115 115 140 40 1,1 RNA4920 139 296 2 400 3 700 1,22
125 125 150 40 1,1 RNA4922 147 325 2 200 3 400 1,32
135 135 165 45 1,1 RNA4924 177 407 2 000 3 100 1,98
145 145 165 35 1,1 RNA4826 112 323 1 900 2 900 1,1
150 150 180 50 1,5 RNA4926 201 495 1 800 2 800 2,42
155 155 175 35 1,1 RNA4828 116 346 1 700 2 700 1,17
160 160 190 50 1,5 RNA4928 214 549 1 700 2 600 2,56
165 165 190 40 1,1 RNA4830 142 402 1 600 2 500 1,54
175 175 200 40 1,1 RNA4832 146 425 1 500 2 400 1,91
475
r r
Fw d D Fw d D
C C
NA49RS NA49.2RS
476
Fw D Fw D
C C
RNA49RS RNA49.2RS
477
Fw d Ew D Fw d Ew D
B B
NAO SNSH NAO
6 6 17 10 10 13 0,3 0,5 NAO6x17x10 SNSH10,5x17x0,5 5,4 6,43 25 000 39 000 0,014 0,6
8 8 19 10 12 15 0,3 0,5 NAO8x19x10 SNSH12,5x19x0,5 5,85 7,51 24 000 37 000 0,017 0,6
20 20 35 17 25 30 0,3 1,2 NAO20x35x17 SNSH25,5x35x0,5 18,8 29,8 11 000 17 000 0,073 1,8
20 35 26 25 30 0,3 1,2 NAO20x35x26 SNSH25,5x35x0,5 25 42,8 11 000 17 000 0,112 1,8
20 37 16 25 32 0,3 1,5 NAO20x37x16 SNSH25,5x37x0,5 19,8 25,3 12 000 18 000 0,08 2,2
20 37 32 25 32 0,3 1,5 NAO20x37x32 SNSH25,5x37x0,5 34 50,7 12 000 18 000 0,162 2,2
25 25 40 17 30 35 0,3 1,2 NAO25x40x17 SNSH30,5x40x0,5 20,2 34,6 9 300 14 000 0,088 2,1
25 40 26 30 35 0,3 1,2 NAO25x40x26 SNSH30,5x40x0,5 26,8 49,7 9 300 14 000 0,132 2,1
25 42 16 30 37 0,3 1,5 NAO25x42x16 SNSH30,5x42x0,5 22,3 31 9 600 15 000 0,096 2,5
25 42 32 30 37 0,3 1,5 NAO25x42x32 SNSH30,5x42x0,5 38,2 62,1 9 600 15 000 0,185 2,5
30 30 45 17 35 40 0,3 1,2 NAO30x45x17 SNSH35,5x45x0,5 22,1 40,8 7 900 12 000 0,102 2,3
30 45 26 35 40 0,3 1,2 NAO30x45x26 SNSH35,5x45x0,5 27,7 54,5 7 900 12 000 0,155 2,3
30 47 16 35 42 0,3 1,5 NAO30x47x16 SNSH35,5x47x0,5 24,5 36,8 8 100 12 000 0,106 2,9
30 47 32 35 42 0,3 1,5 NAO30x47x32 SNSH35,5x47x0,5 42 73,5 8 100 12 000 0,218 2,9
478
Fw d Ew D Fw d Ew D
B B
NAO SNSH NAO
479
Fw Ew D Fw Ew D
C C
RNAO SNSH RNAO
480
Fw Ew D Fw Ew D
C C
RNAO SNSH RNAO
55 55
55
68
68
20
40
60
60
0,3
0,3
RNAO55x68x20
RNAO55x68x40
30,7
52,7
72,4
145
4 900
4 900
7 600
7 600
0,165
0,32 3
55 72 20 63 1 RNAO55x72x20 SNSH56x72x1 40,3 73,5 5 000 7 800 0,212 13
55 72 40 63 1 RNAO55x72x40 SNSH56x72x1 69,1 147 5 000 7 800 0,433 13
100 100 120 30 108 1 RNAO100x120x30 72,4 191 2 700 4 200 0,66
481
INNER RINGS
When it is impractical to meet the shaft raceway design bearings. Other raceway tolerances may also be found
requirements (hardness, surface finish, case depth, etc.) on inner rings for combining with needle roller bearings
outlined in the Engineering section of this catalog, to give one of the clearance classes, or other specially
standard inner rings may be used. requested radial internal clearance requirement.
Inner rings are made of rolling bearing steel and
after hardening, their bores, raceways and end surface Mounting of inner rings
are ground. Inner rings may be used to provide inner Inner rings may be mounted on the shaft with either a
raceway surfaces for needle roller and cage radial loose transition fit or an interference fit. These fits used
assemblies, needle roller bearings and drawn cup needle in conjunction with the proper fit of the bearing outer ring,
roller bearings. The extended inner rings are suitable for will provide the correct operating clearances for most
use with bearings containing lip contact seals and for applications.
applications in which axial movement may be present. Regardless of the fit of the inner ring on the shaft,
the inner ring should be axially located by shaft shoul-
Construction ders or other positive means. The shaft shoulder
Metric series inner rings are available in three basic diameter adjacent to the inner ring must not exceed the
designs and differ only by the chamfers at the ends of inner ring outside diameter (per recommendations on
the raceway surfaces and the lubricant access holes. page 467 in the needle roller bearing section).
Inner rings of series JR have chamfers to assist in When inner rings are to be used with the needle
bearing installation but are without lubricating holes. roller bearings, appropriate shaft tolerances should be
Inner rings of series JR.JS1 have bearing installation selected from Table 3 in this section. When inner rings
chamfers and lubricating holes (bore diameters 5 to are to be used with drawn cup bearings the recom-
50mm). Inner rings of series JRZ.JS1 are without mended shaft tolerances are given in the “Inner ring”
installation chamfers, allowing for maximum possible discussion on page 391 of the “Drawn cup needle roller
raceway contact. bearings” section of this catalog.
482
Inner Rings
B B B
rs rs rs
d F d F d F
JR JR.JS1 JRZ.JS 1
483
Inner Rings
B B B
rs rs rs
d F d F d F
JR JR.JS1 JRZ.JS 1
484
485
Inner Rings
B B B
rs rs rs
d F d F d F
JR JR.JS1 JRZ.JS 1
486
60
60
60
68
70
45
25
1
1
JR60x68x45
JR60x70x25
0,284
0,2 3
60 70 30 1 JR60x70x30 0,24
60 70 60 1 JR60x70x60 0,48
65 72 25 1 JR65x72x25 0,143
65 72 45 1 JR65x72x45 0,266
65 73 25 0,6 JR65x73x25 0,17
65 65 73 35 0,6 JR65x73x35 0,24
65 75 28 1 JR65x75x28 0,24
65 75 30 1 JR65x75x30 0,26
65 75 60 1 JR65x75x60 0,52
70 80 25 1 JR70x80x25 0,23
70 80 30 1 JR70x80x30 0,27
70 70 80 35 1 JR70x80x35 0,32
70 80 54 1 JR70x80x54 0,5
70 80 60 1 JR70x80x60 0,556
75 85 25 1 JR75x85x25 0,24
75 85 30 1 JR75x85x30 0,289
75 75 85 35 1 JR75x85x35 0,338
75 85 54 1 JR75x85x54 0,53
80 90 25 1 JR80x90x25 0,26
80 90 30 1 JR80x90x30 0,306
80 80 90 35 1 JR80x90x35 0,355
80 90 54 1 JR80x90x54 0,565
487
Inner Rings
B
rs
d F
JR
488
Ds ds
SNSH
41 55 1 SNSH41x55x1 8
45,5 55 0,5 SNSH45,5x55x0,5 3,3
46 62 1 SNSH46x62x1 11
51 65 1 SNSH51x65x1 10
56 72 1 SNSH56x72x1 13
61 78 1 SNSH61x78x1 15
66 85 1 SNSH66x85x1 18
489
CR S B E - 16
Design Modifications
S seals with internal thrust washers (CR type only) C crowned o.d.
B hex wrench socket E eccentric stud (CR type only)
NA22 05 2RS
Prefix Suffix
NA22 track roller, yoke type, crowned outside TN molded cage of reinforced, engineered polymer
diameter with inner ring, sealed DZ cylindrical outside diameter
RNA22 track roller, yoke type, crowned outside ZZ two washers for track rollers used for axial
diameter without inner ring, sealed location
RSTO track roller, yoke type, crowned outside .2RS lip contact seal on each side of the bearing
diameter without inner ring, without washers ZZ.DZ two washers for track rollers used for axial
STO track roller, yoke type, crowned outside location; cylindrical outside diameter
diameter with inner ring, without washers DZ.TN cylindrical outside diameter; molded cage of
NATR track roller, yoke type, crowned outside reinforced, engineered polymer
diameter with inner ring, with washers .2RS.DZ lip contact seal on each side of bearing;
NUTR track roller, yoke type, crowned outside cylindrical outside diameter
diameter with inner ring, with washers;
2 paths of full complement cylindrical rollers
STO 25 DZ
Bore diameter for STO, NATR, NUTR:
25 = 25mm
45 = 45mm NUTR 45 100 DZ
Outside diameter for NUTR
100 = 100mm
KR E 22 .2RS
Prefix Outside diameter
KR track roller, stud type with cage; crowned outside diameter 22 = 22mm
KRV track roller, stud type, full complement needle rollers; crowned outside diameter
NUKR track roller, stud type, full complement of cylindrical rollers (2 rows) crowned outside diameter
490
Track Rollers/
Cam Followers
Page Page
STUD TYPE AND YOKE TYPE TRACK ROLLERS – INCH SERIES STUD TYPE AND YOKE TYPE TRACK ROLLERS – METRIC SERIES
Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 492
Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 504
Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 493
Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 506
Load Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 494
Dimensional Accuracy . . . . . . . . . . . . . . . . . . . . . . 507
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 495
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 507
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 495
Load Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 508
Tables of Dimensions Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 509
Stud Type – Needle Rollers . . . . . . . . . . . . . . . . . . 498
Tables of Dimensions
Yoke Type – With End Washers . . . . . . . . . . . . . . . 502
Stud Type – Needle Rollers . . . . . . . . . . . . . . . . . . 512
Stud Type – Cylindrical Rollers . . . . . . . . . . . . . . . 514
Yoke Type – Without End Washers . . . . . . . . . . . . . 516
3
Yoke Type – Without End Washers, Sealed . . . . . . 517
Yoke Type – With End Washers . . . . . . . . . . . . . . . 518
491
IDENTIFICATION Table 1 –
The type, special construction features, and size are desig- Identification Code – Inch Series
nated by an identification code consisting of prefix letters Prefix Letters Suffix Numbers Complete
followed by a dash and suffix numbers. type plus construction plus o.d. equals Designation
features size
The initial prefix letters denote the type of track roller/cam
CR plus SBE plus -16 equals CRSBE-16
follower. Additional prefix letters are used when it is neces-
sary to denote special construction features. The suffix CR plus -16 equals CR-16
numbers following the prefix letters denote the size of the
track roller. See Table 1.
Table 2 –
The basic types are listed below: Code Description – Inch Series
Stud Types
CR - regular stud type, full complement needle rollers,
Description Prefix Code
inch series
YCR - yoke type, full complement needle rollers, inch with seals and CRS
series internal thrust washers
with seals, CRSC
Construction feature code letters for inch series track rollers internal thrust washers
are used as required, in the following order: and crowned outer ring
S - seals with internal thrust washers with seals, internal thrust CRSBC
B - hexagonal wrench socket in stud head washers, hex socket and
(stud type only) crowned outer ring
C - crowned outer ring with seals, internal thrust CRSBCE
E - eccentric stud (stud type only) washers, hex socket,
crowned outer ring and
Descriptions of typical examples, with complete letter codes eccentric stud
combining basic type of bearing and construction features Yoke Types
follow. See Table 2. Description Prefix Code
Since the entire identification code might not appear on the
with seals and YCRS
bearing itself, the manufacturer’s parts list or another reliable
internal thrust washers
source should always be consulted when ordering bearings
with seals, internal thrust YCRSC
for field or service replacement, to make certain that the
washers and crowned
correct unit with the correct lubricant is specified.
outer ring
492
CONSTRUCTION
Timken Torrington products listed on the following pages have
been designed with the outer ring of large radial cross section
to withstand heavy rolling and shock loads on track type or
cam-controlled equipment.
Regular stud type (CR) are designed with integral studs for
cantilever mounting. When a regular stud type track roller is
used within the permissible dynamic load (Fr perm) given in the
tabular data, the ductile core of the stud provides the neces- R
sary toughness for and resistance to shock loads. A screw- R
driver slot or a hexagonal wrench socket in the head of the
stud facilitates mounting. Table 3 –
Yoke type (YCR) are designed for straddle mounting. Crown radius for types CRC, CRSC, CRSBC, YCRC,
Each type is available with a full complement of needle rollers. YCRSC
Size R Size R
Sealed Track Rollers – Inch Series Designation Crown Designation Crown
Inch series sealed track rollers contain a lip type seal and an Radius Radius
internal thrust washer. On some sizes of track rollers, the (approx.) (approx.)
thrust washer and seal have been incorporated into a single (suffix) inch (suffix) inch
component. Regardless of configuration, the thrust washer
-8 6 -28 20
fits between the shoulders of the outer ring and inside faces of
-8-1 7 -30 20
the steel retaining washer and flange of the stud. These -10 7 -32 24
washers reduce sliding friction and serve to increase the life of -10-1 8 -36 24
the bearing, particularly when it is infrequently relub-ricated or
-12 10 -40 30
where misalignment occurs. In all cases, the external dimen-
-14 10 -44 30
sions of the sealed bearings are the same as the unsealed -16 12 -48 30
bearings. The seals are thermally stable in a temperature -18 12 -52 30
range between -25˚F and +225˚F.
-20 14 -56 30
-22 14 -64 30
Crowned Track Rollers -24 20
These units are available with cylindrical or crowned outer -26 20
rings.
Track rollers are designed with a crowned outer ring to 3
alleviate the uneven bearing loading resulting from deflection, Hexagonal Sockets
bending or misalignment in mounting. Smaller sizes of regular inch series stud type units have a
To specify a crowned ring for any inch series track roller screwdriver slot or a hexagonal socket in the flanged end of
having a cylindrical outer ring, add the letter “C” at the end of the stud to facilitate mounting. Larger sizes have a socket to
the prefix code. For example: accommodate a hexagonal wrench. Wrench sizes are listed
in Table 4.
prefix CR – regular stud type, full complement of
needle rollers and cylindrical outer ring
prefix CRC – same as above, but with crowned
outer ring.
The o.d. tolerance of crowned rollers is +0.000, -0.002
inch.
The crown radii are listed in Table 3.
493
494
Static loading
In addition to the basic static load rating C0, the tables also list When the stud shank is housed with an interference fit,
the maximum permissible static radial load F0r perm that may installation force should be applied only to the center portion of
be applied to a stud type or yoke type track roller. The values the flanged end of the stud, preferably with an arbor press.
of F0r perm result in a minimum static factor fs of 0,7 for the When the loads are high, the yoke type track rollers should
worst condition of internal load distribution in inch series track be mounted on a high strength bolt or shaft with the tight
roller operation. The F0rperm values must not be exceeded. transition fit listed in the tabular data. The bearing should be
The static factor fs can be calculated using the following clamped between flat and parallel faces at right angles to the
formula: axis to prevent the retaining washers from coming off under
F0r perm load. If the bearing cannot be clamped, a close axial fit in the
fs ≥ 0,7 • yoke is required.
P0r When the applied loads are light to moderate, the inner ring
where of a yoke type track roller may be mounted on an unhardened
F0r perm Maximum permissible static radial load shaft or bolt with the loose transition fit listed in the tabular data.
Again, the retaining washers should be backed up axially to
P0r Equivalent static load
prevent their coming off under load.
P0r = F0r for yoke type track rollers
F0r Static radial load LUBRICATION
fs = Static factor whose valves should not be smaller than All inch series stud type track rollers with a screwdriver slot
those recommended in table 6 in the flanged end of the stud have provisions for lubrication
through the flanged end of the stud. The 12 and larger sizes
of inch series stud type track rollers with screwdriver slots
Table 6 –
Recommended Values For Static Factors fs have provisions for relubrication through either end of the
for inch series track rollers stud and through a cross-drilled hole in the shank. The ends
of the axial holes are counterbored to accept drive type grease
Requirements for yoke
type track rollers and stud lubrication fittings. Hole diameters for these grease fittings are
type track rollers Recommended fs values listed in the tables of dimensions.
Sizes 8 through 10-1 of the inch series stud type track
High shock-type loads
Quiet running 1,5...2,5 rollers with a hexagonal socket in the flanged end of the stud
Normal loading
cannot be relubricated. Size 12 and up have relubrication
Normal quietness of running 1...1,5 provisions in the threaded end of the stud and a cross-drilled
hole in the shank. At the threaded end of the stud, the axial
Minor impact loads and
rotary motion particularly hole is counterbored to receive a drive type grease fitting. 3
quiet running not required 0,7...1 Sizes 12 through 22 and 48 through 64 of inch series stud
type track rollers with hexagonal sockets also have provi-
MOUNTING sions for relubrication through the hex socket in the flanged
The surface of the hole in the machine element, which supports end of the stud. Sizes 48 through 64 are supplied with
the stud or the mounting shaft, must not deform under the lubrication fittings which may be installed in the axial hole in
expected load, and the support should be sufficiently rigid to the bottom of the hexagonal slot in the head end of the stud, at
resist bending loads. a depth which allows the hexagonal wrench to be inserted in the
Deformation and bending will cause uneven loading of the wrench socket without damaging the grease fitting.
outer ring. Plugs are furnished with stud type track rollers to close off
In mounting the stud type track roller, the retaining washer unused holes. If the cross-drilled hole in the stud shank is not
must be firmly backed up by a flat shoulder which is square used, it will be covered when the track roller is installed properly.
with the stud center line. The shoulder diameter must be no Most inch series yoke type track rollers are produced with
smaller than the minimum clamping diameter (da) listed in the lubrication holes and grooves in the inner ring bores so they can
tabular data. be relubricated through axially and radially drilled holes in the
The maximum inherent strength of the stud is obtained supporting shaft or bolt.
when the unit is supported as close as possible to the retaining Oil is the preferred lubricant for all types. Use continuous
washer, which minimizes the bending moment. For this reason, oil lubrication or frequent grease lubrication for steady rotating
the edge of the housing which supports the stud shank should conditions. Applications involving slow, intermittent oscillation
be kept as sharp as possible, but free from burrs. are not as critical, and longer intervals between relubrication are
To minimize deflection in mounted stud type track rollers, permissible. Both stud and yoke type track rollers are normally
the stud shank should be housed with the fit (db) shown in the supplied with medium temperature grease lubrication.
tabular data. The clamping nut should not be tightened with a
torque value higher than the maximum listed. A screwdriver slot
or hexagonal socket in the end of the stud is provided for a tool
to prevent the stud from turning when the nut is being tightened.
Since the bottom of the screwdriver slot is not flat, it is helpful to
put a radius on the tip of the screwdriver being used to hold the
stud more securely.
495
496
Forklift Truck
Yoke type sealed units serve as high capacity and rugged
guide rollers for lift trucks. Their design permits them to be
mounted on studs welded to the structure. The seals exclude
foreign matter and extend the time between relubrication
periods.
Hay Baler
Stud types are important components on many different types
of farm equipment because of their required long service life
under punishing loads and severe operating conditions.
Needle bearings provide dependable and economical opera-
tion in the windrow pickup of hay balers.
Machine Way
Heavily loaded machine tool tables must travel freely and
accurately. Stud and yoke type sealed units, in combination,
support and guide such tables under the most severe condi-
tions. The high capacity and the very low wear rate permit
heavy loads to be carried without impairing the accuracy of the
table’s travel. the seals exclude dirt and chips and make the
need for relubrication infrequent.
Reciprocating Slide 3
Stud types find wide application in feeding and advancing
mechanisms on metalworking presses. The rotary motion of
an eccentric cam rotating between two cam followers mounted
on a slide imparts reciprocating linear motion to the slide.
Dwell periods as well as accuracy in both rapid and slow linear
actuation of the slide are made possible.
497
STUD TYPE TRACK ROLLERS washer, providing a good retention of lubricant and exclusion of
TYPES CR, CRS – INCH SERIES foreign matter. Sealed units also have internal thrust washers
made of self-lubricating resin.
CONSTRUCTION
The regular inch series stud type track roller is a non-separable DIMENSIONS
unit consisting of an outer ring, a full complement of needle Dimensions given below are for the unplated finished unit.
rollers, stud, and a retaining washer securely fastened to the Upon request, track rollers may be obtained with chrome
stud. A screwdriver slot in the head of the stud facilitates plate on the rolling surface and sides of the outer ring, and
mounting. Cross-drilled holes in the stud raceway and shank, cadmium plate on the other exposed surfaces, as mounted.
and an axially drilled hole through the stud, are provided for When plated, the outer ring outside diameter is a maximum of
relubrication. The recessed axial hole accepts a standard 0.002" greater
nominal inch drive-type grease lubrication fitting. Plugs are than listed.
furnished to close off unused lubrication fitting holes. Sources for Tolerance limits for the outside diameters of the outer ring
lubrication fittings are available upon request. and the stud refer to the “single mean diameter” (the arithmetical
The seals on the type CRS are located in counter-bores of mean of the largest and smallest diameters in a single radial
the outer ring and seal against the stud flange and retaining plane).
B3
C G1
d3
Dd d2 d1
4
G
B2
498
MOUNTING
In mounting stud type track rollers, a close fit between stud
and hole is desirable. Bore dimensions given below result in a
fit varying from 0.0010" tight to 0.0005" loose.
The retaining washer should be firmly backed up by a flat
housing shoulder perpendicular to the stud axis. To provide
sufficient support for the retaining washer, the shoulder
diameter should be at least as large as the minimum clamping
diameter listed.
Stud types may be mounted using either two thin lock
nuts or one lock washer and one nut.
da
Note: Clamping torque db
Ka
is based on lubricated
threads. If threads are
dry, the torque values
listed below may be
doubled.
ra
Track Roller
Designation Load Rating Limiting
Mounting Dimensions
db ra Ka da Clamping Mass 3
with seals and as a Bearing as a Track Roller Speed Bore Dia. Mounting Torque Approx.
without internal thrust Dynamic Static Dynamic Grease for Stud Overhang
seals washers C C0 Cw Fr perm F0r perm Space
+0.0005
-0.0000 max. min. min. max.
lbf rpm inch lbf • in lbs
CR-8 CRS-8 999 1 110 677 233 560 7 000 0.1900 0.010 0.41 .297 8 0.022
CR-8-1 CRS-8-1 1 120 1 280 759 272 652 7 000 0.1900 0.010 0.44 .297 8 0.023
CR-10 CRS-10 1 360 1 770 982 508 1 220 5 500 0.2500 0.015 0.47 .359 20 0.041
CR-10-1 CRS-10-1 1 480 1 970 1 070 569 1 370 5 500 0.2500 0.015 0.50 .359 20 0.045
CR-12 CRS-12 2 330 3 410 1 450 647 1 550 3 900 0.3750 0.015 0.56 .500 55 0.076
CR-14 CRS-14 2 330 3 410 1 700 1 080 2 590 3 900 0.3750 0.015 0.56 .500 55 0.097
CR-16 CRS-16 2 980 5 010 2 010 1 360 3 260 3 000 0.4375 0.030 0.69 .641 150 0.161
CR-18 CRS-18 2 980 5 010 2 220 1 950 4 120 3 000 0.4375 0.030 0.69 .641 150 0.197
CR-20 CRS-20 4 840 7 460 3 400 2 090 5 470 2 600 0.5000 0.030 0.81 .766 205 0.301
CR-22 CRS-22 4 840 7 460 3 680 2 840 6 420 2 600 0.5000 0.030 0.81 .766 205 0.354
CR-24 CRS-24 6 380 9 160 4 520 2 440 5 850 2 300 0.6250 0.030 0.94 .891 390 0.528
CR-26 CRS-26 6 380 9 160 4 840 3 170 7 610 2 300 0.6250 0.030 0.94 .891 390 0.605
CR-28 CRS-28 8 040 12 800 5 830 3 980 9 560 1 900 0.7500 0.040 1.06 1.047 750 0.848
CR-30 CRS-30 8 040 12 800 6 150 4 940 11 100 1 900 0.7500 0.040 1.06 1.047 750 0.947
CR-32 CRS-32 9 770 17 100 7 160 5 850 13 600 1 700 0.8750 0.050 1.33 1.203 900 1.37
CR-36 CRS-36 9 770 17 100 7 770 8 250 16 000 1 700 0.8750 0.050 1.33 1.203 900 1.67
CR-40 CRS-40 13 200 26 600 10 000 11 600 22 700 1 400 1.0000 0.090 1.58 1.313 1350 2.50
CR-44 CRS-44 13 200 26 600 10 600 15 000 25 500 1 400 1.0000 0.090 1.58 1.313 1350 2.93
CR-48 CRS-48 16 800 40 200 11 600 14 400 28 600 990 1.2500 0.090 1.83 1.750 2050 4.20
CR-52 CRS-52 16 800 40 200 12 300 18 000 32 100 990 1.2500 0.090 1.83 1.750 2050 4.81
CR-56 CRS-56 24 900 51 000 18 500 20 200 42 000 950 1.3750 0.090 2.08 1.922 2500 6.42
CR-64 CRS-64 31 100 72 200 22 300 27 200 55 000 780 1.5000 0.090 2.33 2.281 3000 9.46
499
STUD TYPE TRACK ROLLERS The seals on the type CRSB are located in counter-bores of
the outer ring and seal against the stud flange and retaining
TYPE CRSB – INCH SERIES washer, providing a good retention of lubricant and exclusion of
foreign matter.
CONSTRUCTION
The sealed inch series stud type track roller is a non-separable DIMENSIONS
unit consisting of an outer ring, a full complement of needle Dimensions given below are for the unplated finished unit. Upon
rollers, stud seals, internal thrust washers made of self- request, track rollers may be obtained with chrome plate on the
lubricating resin and a retaining washer securely fastened to the rolling surface and sides of the outer ring, and cadmium plate on
stud. A hexagonal wrench socket in the head of the stud the other exposed surfaces, as mounted. When plated, the outer
facilitates mounting. Cross-drilled holes in the stud raceway and ring outside diameter is a maximum of 0.002" greater
shank, and an axially drilled hole through the stud, are provided than listed.
for relubrication. The recessed axial hole accepts a standard Tolerance limits for the outside diameters of the outer ring
nominal inch drive-type grease lubrication fitting. Plugs are and the stud refer to the “single mean diameter” (the arithmetical
furnished to close off unused lubrication fitting holes. Sources mean of the largest and smallest diameters in a single radial
for lubrication fittings are available upon request. plane).
B3
For hexagonal wrench sizes,
see page 492. C G1
d3
D
d4 d2 d1
B2
Outside Dimensions
Diameter d1 D C B2 B3 G1 d4 d2 d3 G Track Roller
Designation
with seals
and internal
+0.0010 +0.000 +0.000 thrust washers
-0.0000 -0.001 -0.005 (nom.) min. UNF
inch
1⁄ 2 0.1900 0.500 0.344 .500 NONE .250 NONE NONE NONE 10 - 32 CRSB-8
0.1900 0.500 0.375 .625 NONE .250 NONE NONE NONE 10 - 32 CRSB-8-1
5⁄ 8 0.2500 0.625 0.406 .625 NONE .312 NONE NONE NONE 1⁄4 - 28 CRSB-10
0.2500 0.625 0.438 .750 NONE .312 NONE NONE NONE 1⁄4 - 28 CRSB-10-1
3⁄4 0.3750 0.750 0.500 .875 .250 .375 .188 .188 .094 3⁄ 8 - 24 CRSB-12
7⁄ 8 0.3750 0.875 0.500 .875 .250 .375 .188 .188 .094 3⁄ 8 - 24 CRSB-14
1 0.4375 1.000 0.625 1.000 .250 .500 .250 .188 .125 7⁄16 - 20 CRSB-16
1 1⁄ 8 0.4375 1.125 0.625 1.000 .250 .500 .250 .188 .125 7⁄16 - 20 CRSB-18
1 1⁄ 4 0.5000 1.250 0.750 1.250 .312 .625 .250 .188 .125 1⁄ 2- 20 CRSB-20
1 3⁄ 8 0.5000 1.375 0.750 1.250 .312 .625 .250 .188 .125 1⁄ 2- 20 CRSB-22
1 1⁄ 2 0.6250 1.500 0.875 1.500 .375 .750 NONE .188 .094 5⁄ 8 - 18 CRSB-24
1 5⁄ 8 0.6250 1.625 0.875 1.500 .375 .750 NONE .188 .094 5⁄ 8 - 18 CRSB-26
1 3⁄ 4 0.7500 1.750 1.000 1.750 .438 .875 NONE .188 .094 3⁄4 - 16 CRSB-28
1 7⁄ 8 0.7500 1.875 1.000 1.750 .438 .875 NONE .188 .094 3⁄4 - 16 CRSB-30
2 0.8750 2.000 1.250 2.000 .500 1.000 NONE .188 .125 7⁄ 8 - 14 CRSB-32
2 1⁄ 4 0.8750 2.250 1.250 2.000 .500 1.000 NONE .188 .125 7⁄ 8 - 14 CRSB-36
2 1⁄ 2 1.0000 2.500 1.500 2.500 .562 1.125 NONE .188 .125 1 - 14§ CRSB-40
2 3⁄ 4 1.0000 2.750 1.500 2.500 .562 1.125 NONE .188 .125 1 - 14§ CRSB-44
3 1.2500 3.000 1.750 2.500 .625 1.250 .250 .250 .125 1 1⁄4 - 12 •CRSB-48
3 1⁄ 4 1.2500 3.250 1.750 2.500 .625 1.250 .250 .250 .125 1 1⁄4 - 12 •CRSB-52
3 1⁄ 2 1.3750 3.500 2.000 2.750 .688 1.375 .250 .250 .125 1 3⁄ 8 - 12 •CRSB-56
4 1.5000 4.000 2.250 3.500 .750 1.500 .250 .250 .125 1 1⁄ 2 - 12 •CRSB-64
5 2.0000 5.000 2.750 5.062 .875 2 .562 .250 .250 .250 2 - 12† CRSB-80
6 2.5000 6.000 3.250 6.000 1.000 3.000 .250 .250 .250 2.5 - 12† CRSB-96
§ UNS instead of UNF threads. • Furnished with lubrication hole in head end of stud and lubrication fitting installed
† UN instead of UNF threads. below bottom of hex wrench socket.
500
MOUNTING
In mounting stud type track rollers, a close fit between stud and
hole is desirable. Bore dimensions given below result in a fit
varying from 0.0010" tight to 0.0005" loose.
The retaining washer should be firmly backed up by a flat
housing shoulder perpendicular to the stud axis. To provide
sufficient support for the retaining washer, the shoulder diameter
should be at least as large as the minimum clamping diameter
listed.
Stud types may be mounted using either two thin lock nuts
or one lock washer and one nut.
da
Note: Clamping torque db
Ka
is based on lubricated
threads. If threads are
dry, the torque values
listed below may be
doubled.
ra
501
B
C
b
D d
YCR YCRS
Outside Dimensions
Diameter D d B C b Track Roller
Designation
with seals
without and internal
inch seals thrust
+0.000 +0.0050 +0.000 washers
-0.001 -0.0100 -0.005 (nom.)
max. min.
3⁄ 4 0.750 0.2502 0.2496 0.5625 0.500 0.125 YCR-12 YCRS-12
7⁄ 8 0.875 0.2502 0.2496 0.5625 0.500 0.125 YCR-14 YCRS-14
1 1.000 0.3127 0.3121 0.6875 0.625 0.125 YCR-16 YCRS-16
1 1⁄ 8 1.125 0.3127 0.3121 0.6875 0.625 0.125 YCR-18 YCRS-18
1 1⁄ 4 1.250 0.3752 0.3746 0.8125 0.750 0.188 YCR-20 YCRS-20
1 3⁄ 8 1.375 0.3752 0.3746 0.8125 0.750 0.188 YCR-22 YCRS-22
1 1⁄ 2 1.500 0.4377 0.4371 0.9375 0.875 0.125 YCR-24 YCRS-24
1 5⁄ 8 1.625 0.4377 0.4371 0.9375 0.875 0.125 YCR-26 YCRS-26
1 3⁄ 4 1.750 0.5002 0.4996 1.0625 1.000 0.125 YCR-28 YCRS-28
1 7⁄ 8 1.875 0.5002 0.4996 1.0625 1.000 0.125 YCR-30 YCRS-30
2 2.000 0.6252 0.6246 1.3125 1.250 0.125 YCR-32 YCRS-32
2 1⁄ 4 2.250 0.6252 0.6246 1.3125 1.250 0.125 YCR-36 YCRS-36
2 1⁄ 2 2.500 0.7502 0.7496 1.5625 1.500 0.145 YCR-40 YCRS-40
2 3⁄ 4 2.750 0.7502 0.7496 1.5625 1.500 0.145 YCR-44 YCRS-44
3 3.000 1.0001 0.9995 1.8125 1.750 0.145 YCR-48 YCRS-48
3 1⁄ 4 3.250 1.0001 0.9995 1.8125 1.750 0.145 YCR-52 YCRS-52
3 1⁄ 2 3.500 1.1251 1.1245 2.0625 2.000 0.145 YCR-56 YCRS-56
4 4.000 1.2501 1.2495 2.3125 2.250 0.145 YCR-64 YCRS-64
5 5.000 1.7501 1.7495 2.8750 2.750 .3750 — YCRS-80
6 6.000 2.2501 2.2495 3.3750 3.250 .3750 — YCRS-96
502
MOUNTING
The machine element with the holes in which the mounting
bolt is supported must be sufficicently rigid to resist local
crushing under the applied load and to resist bending which
can cause uneven loading of the rollers.
When the applied loads are high, the tight transition fit
should be used in conjunction with a high strength shaft or
bolt. When loads are moderate, the loose transistion fit may
be used with a high strength shaft or bolt. For light loads, the
loose transistion fit may be used with an unhardened shaft
or bolt.
The unit should be clamped endwise between parallel
faces perpendicular to the axis to prevent the retaining
washers from coming off under load. If the unit cannot be
clamped, a close axial fit in the yoke is required.
S da
inch inch
lbf rpm max. min. max. min. min. lbs
YCR-12 YCRS-12 2 330 3 410 1 450 647 1 550 3 900 0.2497 0.2493 0.2505 0.2501 0.500 0.06
YCR-14 YCRS-14 2 330 3 410 1 700 1 080 2 590 3 900 0.2497 0.2493 0.2505 0.2501 0.500 0.08
YCR-16 YCRS-16 2 980 5 010 2 010 1 360 3 260 3 000 0.3122 0.3118 0.3130 0.3126 0.641 0.15
YCR-18 YCRS-18 2 980 5 010 2 220 1 950 4 120 3 000 0.3122 0.3118 0.3130 0.3126 0.641 0.17
YCR-20 YCRS-20 4 840 7 460 3 400 2 090 5 470 2 600 0.3747 0.3743 0.3755 0.3751 0.766 0.24
YCR-22 YCRS-22 4 840 7 460 3 680 2 840 6 420 2 600 0.3747 0.3743 0.3755 0.3751 0.766 0.30
YCR-24 YCRS-24 6 380 9 160 4 520 2 440 5 850 2 300 0.4372 0.4368 0.4380 0.4376 0.891 0.41
YCR-26 YCRS-26 6 380 9 160 4 840 3 170 7 610 2 300 0.4372 0.4368 0.4380 0.4376 0.891 0.50
YCR-28 YCRS-28 8 040 12 800 5 830 3 980 9 560 1 900 0.4997 0.4993 0.5007 0.5003 1.047 0.64
YCR-30 YCRS-30 8 040 12 800 6 150 4 940 11 100 1 900 0.4997 0.4993 0.5007 0.5003 1.047 0.80
YCR-32 YCRS-32 9 770 17 100 7 160 5 850 13 600 1 700 0.6247 0.6243 0.6257 0.6253 1.203 1.05
YCR-36 YCRS-36 9 770 17 100 7 770 8 250 16 000 1 700 0.6247 0.6243 0.6257 0.6253 1.203 1.32
YCR-40 YCRS-40 13 200 26 600 10 000 11 600 22 700 1 400 0.7497 0.7493 0.7507 0.7503 1.313 1.80
YCR-44 YCRS-44 13 200 26 600 10 600 15 000 25 500 1 400 0.7497 0.7493 0.7507 0.7503 1.313 2.25
YCR-48 YCRS-48 16 800 40 200 11 600 14 400 28 600 990 0.9996 0.9991 1.0008 1.0003 1.750 3.10
YCR-52 YCRS-52 16 800 40 200 12 300 18 000 32 100 990 0.9996 0.9991 1.0008 1.0003 1.750 3.62
YCR-56 YCRS-56 24 900 51 000 18 500 20 200 42 000 950 1.1246 1.1241 1.1258 1.1253 1.922 4.95
YCR-64 YCRS-64 31 100 72 200 22 300 27 200 55 000 780 1.2496 1.2491 1.2508 1.2503 2.281 7.05
— YCRS-80 33 800 (Call Timken Engineering) 700 1.7496 1.7491 1.7508 1.7503 2.875 13.20
— YCRS-96 48 300 (Call Timken Engineering) 580 2.2496 2.2491 2.2508 2.2503 3.375 23.20
503
Timken Torrington track rollers listed in this catalog have been Reference standards are:
designed with outer rings of a large radial cross section to • ISO 6278 – Needle roller bearings – Track rollers –
withstand heavy rolling and shock loads on track type or Boundary dimensions
cam-controlled equipment. The outside diameters of the outer • ISO 492 – Radial bearings – Tolerances
rings are either crowned or cylindrical. Crowned track rollers
• DIN 620 – Tolerances of Ball and Roller Bearings
are designed to alleviate uneven bearing loading resulting
from deflection, bending or misalignment in mounting. • ISO 281 – Rolling bearings – Dynamic load ratings and
Stud type track rollers are available with or without lip rating life
contact seals, although NUKR series are shielded only.
Yoke type track rollers are designed for straddle mounting.
Each metric series yoke type is available with needle roller
and cage radial assemblies except for the NUTR type which
contains two rows of full complements of cylindrical rollers.
504
Yoke type track rollers with end washers Yoke type track rollers with
end washers, full complement
505
CONSTRUCTION Be
STUD TYPE TRACK ROLLERS
The metric series stud type track roller is a non-separable unit
consisting of a large radial cross-section outer ring, needle e De
de
roller and cage radial assembly or a full complement of needle
rollers, a stud and a retaining washer securely fastened to the
stud.
The seals on the sealed stud type track rollers are located
in the counterbores of the outer ring and seal against the stud Since a track roller with an eccentric stud is usually adjusted
flange and the retaining washer, providing good retention of upon installation by turning the stud in the mounting hole, a
lubricant and exclusion of foreign material. The seals are close clearance fit between the outside diameter of the bushing
thermally stable in a temperature range between -30˚C and and the mounting hole is necessary. For turning the stud, a
110˚C. hexagonal wrench is generally more convenient than a screw-
A screwdriver slot (standard) or a hexagonal wrench driver, thus, the option of a hexagonal wrench socket in the
socket (metric series suffix SK) in the head of the stud facili- head of the stud should be considered.
tates mounting. Metric series hexagonal socket sizes are Some applications may require more secure positioning than
listed in Table 1. NUKR series track rollers have outside provided by the tightened stud nut. If so, it is recommended
diameters of 35mm and more. They have two rows of full that the mounting hole and the eccentric bushing be drilled at
complements of cylindrical rollers suitable for high dynamic the time of installation to accept a locating dowel pin.
and static radial loads. The outer ring is located axially by the
cylindrical rollers. Table 2 – Eccentric Bushing Dimensions –
Metric Series
Table 1 – Hexagonal Socket – Metric Series Stud type track roller
Stud type track roller Dimensions outside diameter Dimensions
outside diameter > ≤ de De Be e
mm
> ≤ SW t
16 6 9 7 0,5
mm
19 19 8 11 9 0,5
16 3 2,5 22 26 10 13 10 0,5
19 26 4 2,5 30 32 12 15 11 0,5
30 35 6 4
35 35 16 20 14 1,0
40 52 8 5
40 40 18 22 16 1,0
62 72 12 7
47 52 20 24 18 1,0
80 90 17 10 62 72 24 28 22 1,0
80 90 30 35 29 1,5
SW
YOKE TYPE TRACK ROLLERS
Metric series yoke type track rollers without
end washers
These yoke type track rollers are available with a crowned or a
cylindrical outside diameter of the outer ring, and with or with-
out a separable inner ring. Since they are supplied without
t end washers, their outer rings must be guided by the adjacent
end locating surfaces. Tolerance class F6 is the normal speci-
fication for the bore of the metric series needle roller and cage
radial assemblies used with these yoke type track rollers.
Eccentric studs for stud type track rollers
To provide radial adjustment of the outer ring toward the track
or cam surface at the time of installation, the metric series stud Yoke type track rollers – Series RSTO & STO
type track rollers are available with eccentric studs which are Series STO have a seperable inner ring and when the inner ring
specified by adding the letter “E” to the designation letters: is removed they become series RSTO. They run directly on a
KRE and NUKRE. Appropriate dimensions of the eccentric hardened and ground inner raceway. Quality requirements
stud bushing are listed in Table 2. for inner raceways are given in the Needle Bearing Engineer-
ing section of this catalog.
506
Sealed yoke type track rollers without end washers – DIMENSIONAL ACCURACY
Series RNA 22.2RS & NA22.2RS The tolerances of the basic metric series stud type and yoke
These yoke type track rollers have the same bore diameter and type track rollers whose outer rings have a cylindrical outside
outside diameter as most of the other metric series yoke type diameter, correspond to tolerances specified in ISO-492
track rollers listed in this catalog. The thick section outer ring is Radial bearings - Tolerances. The outer ring tolerances given
made of one-piece channel-shaped bearing quality steel, heat in Table 4 apply to the outer rings used in the stud type and
treated to yield maximum load carrying capability. The integral yoke type, metric series, track rollers. Metric series track
end flanges provide axial guidance for the large diameter rollers with a crowned outside diameter are the exception:
needle rollers, and a cage supplies their inward retention. their outside diameter tolerances is 0/-0,05 for all sizes.
These track rollers have two integral lip contact seals designat- The stud diameter and stud length tolerances are given in
ed by .2RS. The seals are thermally stable in a temperature Table 3. The inner ring tolerances given in Table 5 apply to
range between -30°C and 110°C. Care should be exercised inner rings used in metric series yoke type track rollers.
when mounting track rollers without inner rings onto inner
raceways to avoid damage to the seals. Inner raceway quality Table 3 – Tolerances For Stud Diameter
requirements are given in the Needle Bearing Engineering And Stud Length – Metric Series
section of this catalog. Stud Diameter Stud Length
d1 ∆d1S B2 ∆B 2
Metric Series Yoke type track rollers with end washers mm µm mm
These yoke type track rollers are available with a crowned or
> ≤ high low high low
a cylindrical outside diameter of the outer ring. Metric series
yoke type track rollers with end washers, depending on the 3 6 0 -12
internal construction, may be end guided, either through the 6 10 0 -15 all
end washers or between the end faces of the rollers and the 10 18 0 -18 lengths 0 -1
inside faces of the outer ring flanges. 18 30 0 -21
30 50 0 -25
Yoke type track rollers – Series NATR & STO.ZZ 50 80 0 -30
The series NATR yoke type track rollers are of non-separable 80 100 0 -35
design consisting of a crowned or a cylindrical outer ring, caged
needle rollers, an inner ring and two retaining end washers MOUNTING
securely fastened to the inner ring. The series STO.ZZ yoke STUD TYPE TRACK ROLLERS
type track rollers are of separable design with two loose end
When the stud shank of a metric series stud type track roller
washers. These end washers placed in the counterbores of the
outer ring form very effective labyrinth type shields, providing
is mounted in a hole of tolerance H7, the installation force
should be applied only to the center portion of the flanged
3
good retention of lubricant and exclusion of foreign material.
end of the stud, preferably with an arbor press. The surface
A lubrication hole in the inner ring provides for relubrication
of the hole in the machine element which supports the stud
when a cross-drilled bolt or shaft, which can be lubricated from
must not deform under the expected load, and the support
the end, is used.
should be sufficiently rigid to resist bending loads. Deforma-
tion and bending will cause uneven loading of the outer ring.
Yoke type track rollers – Series NUTR
In mounting the stud type track roller, the retaining washer
The series NUTR yoke type track rollers are of non-separable
must be firmly backed up by a flat shoulder which is square
design consisting of a crowned or a cylindrical outer ring, two
with the stud center line. The shoulder diameter must be no
rows of full complements of cylindrical rollers, an inner ring,
smaller than the minimum clamping diameter, da listed in the
two retaining end washers and two shields. The outer ring is
tabular data.
located axially through the cylindrical rollers.
The maximum inherent strength of the stud is obtained
A lubricating hole in the inner ring provides for relubrication
when the track roller is supported as close as possible to the
when a cross-drilled bolt or shaft, which can be lubricated from
retaining washer, which minimizes the bending moment.
the end, is used.
For this reason the edge of the housing which supports the
The smallest track roller of this series has an outside dia-
stud shank should be kept as sharp as practical, but free
meter of 35 mm. NUTR yoke type track rollers are well suited
from burrs.
to carry high loads and designs with a thicker outer ring are
The clamping nut should not be tightened with a torque
particularly suitable for high shock loads. Designs with thicker
value higher than the maximum listed. A screw-driver slot or
outer ring have a larger outside diameter which can be identi-
hexagonal wrench socket in the flanged end of the stud is
fied by the bearing designation (e.g. NUTR 1542).
provided for a tool to prevent the stud from turning when the
nut is being tightened. Hexagonal nuts are supplied with all
metric series stud type track rollers.
507
d
mm ∆dmp ∆B s
> ≤ high low high low
2,5 18 0 -8 0 -180
18 30 0 -10 0 -210
30 50 0 -12 0 -250
50 80 0 -15 0 -300
80 120 0 -20 0 -350
508
Static rating as a track roller available for grease storage, therefore, they may require more
In addition to the basic static load rating C0, the tables also frequent lubrication than caged type track rollers. Metric
list the maximum permissible static radial load F0r perm that series stud type track rollers, with a screwdriver slot in the
may be applied to a stud type or yoke type metric series track flanged end of the stud, have provisions for relubrication
roller. The values of F0r perm result in a calculated minimum through the flanged end of the stud. Metric series stud type
static factor fs of 0,7 for the worst condition of internal load track rollers with hexagonal sockets can not be relubricated
distribution in metric series track roller operation. The F0r perm from the flanged end of the stud. Both types of metric series
values must not be exceeded. The static factor fs can be stud type track rollers, with outside diameters larger than
calculated using the following formula: 22mm, allow for relubrication through the threaded end of the
stud. In addition, metric series stud type track rollers with
F0r perm
fs ≥ 0,7 • 30mm and larger outside diameters allow for relubrication
P0r through a cross-drilled hole in the stud shank. The ends of
the axial holes are counterbored to accept press-fit grease
where fittings of series VENN. The grease fittings are supplied with
F 0r perm = Maximum permissible static radial load (kN) metric series stud type track rollers. Hole diameters (d4) for
these grease fittings are listed in the tables of dimensions on
P0r = Equivalent static load (kN) pages 512 to 515.
P0r = F0r for metric series track rollers
F0r = Static radial load (kN) Table 7 – Metric Series Grease Fittings,
Series VENN
fs = Static factor whose values should not be Designation Dimensions Mass
smaller than those recommended in Table 6. d4 DK H H1 approx.
mm g
Table 6 –
VENN 4 4 6 6 1,5 0,4
Recommended Values For Static Factors fs VENN 6 6 8 7 2 1,6
for metric series track rollers VENN 8 8 10 12 3 4,7
Requirements for yoke
type track rollers and stud
type track rollers Recommended fs values
d4 Dk
High shock-type loads
Quiet running 1,5...2,5 3
Normal loading
Normal quietness of
running 1...1,5 H1
Minor impact loads and H
rotary motion particularly
quiet running not required 0,7...1
Two plugs are supplied with every metric series stud type
LUBRICATION OF STUD TYPE TRACK ROLLERS track roller to close off unused holes. At the flanged end, the
Timken Torrington metric series stud type track rollers are plug must not be pushed in too deeply as it may cover the
supplied with a lithium soap based, general purpose, grease. cross-drilled lubricating hole. The plug should be pressed in
When the caged KR series track rollers are operated at low using an installation tool whose dimensions are given in
speeds, with light loads and in clean environments, there Table 8. If the cross-drilled hole in the stud shank is not used,
often is no need to relubricate the track roller. In other it will be covered when the track roller is properly installed.
applications, periodic relubrication may be necessary to
obtain optimum performance. The full complement KRV and
NUKR series of track rollers have less internal volume
509
t1-0,1
t +0,2
510
511
R500 R500
D da d4 d1 d4 G D da d4 d1 d4 G
C B3
r d3
C1 G1 C1 G1
B2 B2
B1 B1
D da d4 d1 d4 G
KR KR.2RS
C1 G1
B2
B1
KR.DZ
Outside Dimensions
diameter d1 D C rs min B1 B2 B3 G1 d4 d3 G C1 da
h7
mm
16 6 16 11 0,3 28,2 16 8 4 M6x1 0,6 11
6 16 11 0,3 28,2 16 8 4 M6x1 0,6 11
6 16 11 0,3 28,2 16 8 4 M6x1 0,6 11
6 16 11 0,3 28,2 16 8 4 M6x1 0,6 11
6 16 11 0,3 28,2 16 8 4 M6x1 0,6 11
6 16 11 0,3 28,2 16 8 4 M6x1 0,6 11
512
C B3 C B3
r d3 r d3
R500
D d a d4 d1 d4 G D da d4 d1 d4 G
C1 G1 C1 G1
B2 B2
B1 B1
KRV KRV.DZ
513
R500
D da d4 d1 d4 G
C1 G1
B2
B1
NUKR
Outside Dimensions
diameter d1 D C rs min B1 B2 B3 G1 d4 d3 G C1 da
h7
mm
35 16 35 18 0,6 52 32,5 8 17 6 3 M16x1,5 0,8 25
16 35 18 0,6 52 32,5 8 17 6 3 M16x1,5 0,8 25
514
D da d4 d1 d4 G
C1 G1
B2
B1
NUKR.DZ
NUKR52
NUKR52.DZ
45,8
45,8
63,1
63,1
29,6
29,6
22,2
22,2
35,4
35,4
109
109
3 700
3 700
0,46
0,46
3
NUKR62 62,7 83,1 40,9 29,6 47,2 193 3 200 0,79
NUKR62.DZ 62,7 83,1 40,9 29,6 47,2 193 3 200 0,79
NUKR72 68,9 97,8 46,1 39,6 63,1 193 2 600 1,04
NUKR72.DZ 68,9 97,8 46,1 39,6 63,1 193 2 600 1,04
515
Fw d Ew D Fw d Ew D
Fw Ew D Fw Ew D
B B
RSTO RSTO.DZ STO STO.DZ
516
Fw d da D Fw d da D
Fw da D Fw da D
B B
RNA22.2RS RNA22.2RS.DZ NA22.2RS NA22.2RS.DZ
24 24
24
11,8
11,8
12
12
18
18
0,3
0,3
RNA22/8.2RS
RNA22/8.2RS.DZ
6,98
6,98
6,08
6,08
5,31
5,31
3,37
3,37
5,22
5,22
11 000
11 000
0,025
0,025
24 8 12 11,8 12 18 0,3 0,3 NA22/8.2RS 6,98 6,08 5,31 3,37 5,22 11 000 0,031
24 8 12 11,8 12 18 0,3 0,3 NA22/8.2RS.DZ 6,98 6,08 5,31 3,37 5,22 11 000 0,031
30 30
30
13,8
13,8
14
14
20
20
0,6
0,6
RNA2200.2RS
RNA2200.2RS.DZ
9,57
9,57
9,45
9,45
8,03
8,03
7,85
7,85
9,45
9,45
9 400
9 400
0,049
0,049
30 10 14 13,8 14 20 0,6 0,3 NA2200.2RS 9,57 9,45 8,03 7,85 9,45 9 400 0,057
30 10 14 13,8 14 20 0,6 0,3 NA2200.2RS.DZ 9,57 9,45 8,03 7,85 9,45 9 400 0,057
32 32
32
13,8
13,8
16
16
22
22
0,6
0,6
RNA2201.2RS
RNA2201.2RS.DZ
10,2
10,2
10,5
10,5
8,2
8,2
7,78
7,78
10,1
10,1
8 100
8 100
0,053
0,053
32
32
12
12
14
14
13,8
13,8
16
16
22
22
0,6
0,6
0,3
0,3
NA2201.2RS
NA2201.2RS.DZ
10,2
10,2
10,5
10,5
8,2
8,2
7,78
7,78
10,1
10,1
8 100
8 100
0,063
0,063
3
35 35
35
13,8
13,8
20
20
27
27
0,6
0,6
RNA2202.2RS
RNA2202.2RS.DZ
13,4
13,4
14,5
14,5
9,24
9,24
6
6
10,2
10,2
6 300
6 300
0,055
0,055
35 15 14 13,8 20 27 0,6 0,3 NA2202.2RS 13,4 14,5 9,24 6 10,2 6 300 0,07
35 15 14 13,8 20 27 0,6 0,3 NA2202.2RS.DZ 13,4 14,5 9,24 6 10,2 6 300 0,07
40 40
40
15,8
15,8
22
22
30
30
1
1
RNA2203.2RS
RNA2203.2RS.DZ
16,5
16,5
17,8
17,8
11,9
11,9
8,5
8,5
13,7
13,7
5 900
5 900
0,09
0,09
40 17 16 15,8 22 30 1 0,3 NA2203.2RS 16,5 17,8 11,9 8,5 13,7 5 900 0,107
40 17 16 15,8 22 30 1 0,3 NA2203.2RS.DZ 16,5 17,8 11,9 8,5 13,7 5 900 0,107
47 47
47
17,8
17,8
25
25
35
35
1
1
RNA2204.2RS
RNA2204.2RS.DZ
19,9
19,9
20,2
20,2
14,8
14,8
11
11
16,7
16,7
5 200
5 200
0,15
0,15
47 20 18 17,8 25 35 1 0,3 NA2204.2RS 19,9 20,2 14,8 11 16,7 5 200 0,175
47 20 18 17,8 25 35 1 0,3 NA2204.2RS.DZ 19,9 20,2 14,8 11 16,7 5 200 0,175
52 52
52
17,8
17,8
30
30
40
40
1
1
RNA2205.2RS
RNA2205.2RS.DZ
22,1
22,1
24,3
24,3
15,5
15,5
11,3
11,3
17,7
17,7
4 300
4 300
0,171
0,171
52 25 18 17,8 30 40 1 0,3 NA2205.2RS 22,1 24,3 15,5 11,3 17,7 4 300 0,202
52 25 18 17,8 30 40 1 0,3 NA2205.2RS.DZ 22,1 24,3 15,5 11,3 17,7 4 300 0,202
62 62
62
19,8
19,8
35
35
47
47
1
1
RNA2206.2RS
RNA2206.2RS.DZ
29,7
29,7
32,8
32,8
21,2
21,2
15,8
15,8
24,8
24,8
3 700
3 700
0,285
0,285
62 30 20 19,8 35 47 1 0,3 NA2206.2RS 29,7 32,8 21,2 15,8 24,8 3 700 0,324
62 30 20 19,8 35 47 1 0,3 NA2206.2RS.DZ 29,7 32,8 21,2 15,8 24,8 3 700 0,324
72 72
72
22,8
22,8
42
42
54
54
1,1
1,1
RNA2207.2RS
RNA2207.2RS.DZ
41,1
41,1
52,5
52,5
28,6
28,6
24,2
24,2
37,9
37,9
3 000
3 000
0,42
0,42
72 35 23 22,8 42 54 1,1 0,6 NA2207.2RS 41,1 52,5 28,6 24,2 37,9 3 000 0,49
72 35 23 22,8 42 54 1,1 0,6 NA2207.2RS.DZ 41,1 52,5 28,6 24,2 37,9 3 000 0,49
80 80
80
22,8
22,8
48
48
60
60
1,1
1,1
RNA2208.2RS
RNA2208.2RS.DZ
44,3
44,3
60
60
30,4
30,4
27,8
27,8
42
42
2 600
2 600
0,515
0,515
80 40 23 22,8 48 60 1,1 0,6 NA2208.2RS 44,3 60 30,4 27,8 42 2 600 0,615
80 40 23 22,8 48 60 1,1 0,6 NA2208.2RS.DZ 44,3 60 30,4 27,8 42 2 600 0,615
85 85
85
22,8
22,8
52
52
64
64
1,1
1,1
RNA2209.2RS
RNA2209.2RS.DZ
45,6
45,6
63,9
63,9
30,9
30,9
29,7
29,7
43,7
43,7
2 400
2 400
0,565
0,565
85 45 23 22,8 52 64 1,1 0,6 NA2209.2RS 45,6 63,9 30,9 29,7 43,7 2 400 0,661
85 45 23 22,8 52 64 1,1 0,6 NA2209.2RS.DZ 45,6 63,9 30,9 29,7 43,7 2 400 0,661
90 90
90
22,8
22,8
58
58
70
70
1,1
1,1
RNA2210.2RS
RNA2210.2RS.DZ
48,5
48,5
71,3
71,3
31
31
29,4
29,4
43,4
43,4
2 100
2 100
0,59
0,59
90 50 23 22,8 58 70 1,1 0,6 NA2210.2RS 48,5 71,3 31 29,4 43,4 2 100 0,712
90 50 23 22,8 58 70 1,1 0,6 NA2210.2RS.DZ 48,5 71,3 31 29,4 43,4 2 100 0,712
517
R500 R500
d da D d da D d da D d da D
B B B B
47 47 20 20 19,8 37 0,3 STO20ZZ 19,8 25,4 15,7 19,5 23,5 4 900 0,2
47 20 20 19,8 37 0,3 STO20ZZ.DZ 19,8 25,4 15,7 19,5 23,5 4 900 0,2
52 52 25 20 19,8 42 0,3 STO25ZZ 22,2 31,1 16,4 19,8 25,1 4 100 0,24
52 25 20 19,8 42 0,3 STO25ZZ.DZ 22,2 31,1 16,4 19,8 25,1 4 100 0,24
72 72 35 25 24,8 56 0,6 STO35ZZ 35,2 56,6 25,9 39,2 45,5 2 900 0,56
72 35 25 24,8 56 0,6 STO35ZZ.DZ 35,2 56,6 25,9 39,2 45,5 2 900 0,56
80 80 40 26 25,8 64 0,6 STO40ZZ 38,8 67,8 26,8 41,5 48,1 2 400 0,7
80 40 26 25,8 64 0,6 STO40ZZ.DZ 38,8 67,8 26,8 41,5 48,1 2 400 0,7
85 85 45 26 25,8 69 0,6 STO45ZZ 40,3 73,5 26,9 42,4 48,6 2 200 0,7
85 45 26 25,8 69 0,6 STO45ZZ.DZ 40,3 73,5 26,9 42,4 48,6 2 200 0,7
518
r r
R500
r1 r1
d da D d da D
B B
NUTR NUTR.DZ
47 47
47
17
17
21
21
20
20
27
27
1
1
0,3
0,3
NUTR1747
NUTR1747DZ
26,6
26,6
33,3
33,3
22
22
28,1
28,1
33,6
33,6
5 300
5 300
0,23
0,23
3
47 20 25 24 32 1 0,3 NUTR20 41,4 53,2 28,1 20,5 32,7 4 500 0,25
47 20 25 24 32 1 0,3 NUTR20DZ 41,4 53,2 28,1 20,5 32,7 4 500 0,25
80 80 35 29 28 50 1,1 0,6 NUTR3580 68,9 97,8 51,7 58,7 81,9 2 600 0,86
80 35 29 28 50 1,1 0,6 NUTR3580DZ 68,9 97,8 51,7 58,7 81,9 2 600 0,86
80 40 32 30 55 1,1 0,6 NUTR40 91,8 132 60,6 48 76,5 2 500 0,85
80 40 32 30 55 1,1 0,6 NUTR40DZ 91,8 132 60,6 48 76,5 2 500 0,85
90 90 40 32 30 55 1,1 0,6 NUTR4090 91,8 132 69,1 75,4 111 2 500 1,16
90 40 32 30 55 1,1 0,6 NUTR4090DZ 91,8 132 69,1 75,4 111 2 500 1,16
90 50 32 30 65 1,1 0,6 NUTR50 102 160 63,3 52,9 84,3 2 000 0,99
90 50 32 30 65 1,1 0,6 NUTR50DZ 102 160 63,3 52,9 84,3 2 000 0,99
100 100 45 32 30 60 1,1 0,6 NUTR45100 97,2 146 74,3 92,2 127 2 200 1,43
100 45 32 30 60 1,1 0,6 NUTR45100DZ 97,2 146 74,3 92,2 127 2 200 1,43
110 110 50 32 30 65 1,1 0,6 NUTR50110 102 160 79 110 141 2 000 1,73
110 50 32 30 65 1,1 0,6 NUTR50110DZ 102 160 79 110 141 2 000 1,73
519
NT A 16 25
Cage Design Outside Diameter
A needle roller 25 = 25⁄16" = 19⁄16"
C needle roller
H cylindrical roller
TR B 10 18
A,B,C etc washer thickness, inch Outside Diameter
I & J bore piloted washers 18 = 18⁄16" = 1 1⁄8"
ID, JD outside diameter piloted washers
AXK 60 85
Prefix Bore Diameter
K.811 Cylindrical roller thrust bearing 02 = 15mm
K.812 Cylindrical roller thrust bearing 03 = 17mm
(for bore ≥ 20mm): bore code x 5 = bore diameter
04 = 4 x 5 = 20mm
K.811 04 TVP
Suffix
TVP molded, reinforced polymer window-type cage
LPB machined, light metal window-type cage
520
LS 40 60
Prefix Bore Diameter
GS.811, GS.812 Housing washer for GS.811:
for WS.811, WS.812: for GS.812:
WS.812, WS.812 Shaft washer 02 = 16mm
02 = 15mm 02 = 16mm
03 = 17mm 03 = 18mm 03 = 17mm
(for bore ≥ 20mm): 04 = 21mm 04 = 21mm
bore code x 5 = bore diameter 05 = 26mm 05 = 26mm
04 = 4 x 5 = 20mm (for bore ≥ 30mm): (for bore ≥ 30mm):
[bore code x 5]+2 = bore diameter [bore code x 5]+2 = bore diameter
06 = [6 x 5] +2 = 32mm 06 = [6 x 5] +2 = 32mm
(for bore > 85mm):
Thrust
Bearings
Page Page
NEEDLE ROLLER AND CAGE THRUST ASSEMBLIES NEEDLE ROLLER AND CAGE THRUST ASSEMBLIES
AND THRUST WASHERS – INCH SERIES AND THRUST WASHERS – METRIC SERIES 3
Thrust Assemblies and Thrust Bearings – Inch Series Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 538
Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 522 Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 538
Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 523 Dimensional Accuracy . . . . . . . . . . . . . . . . . . . . . . . 539
Dimensional Accuracy . . . . . . . . . . . . . . . . . . . . . . . 523 Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 540
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 524 Load Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 541
Load Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 525 Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 541
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 525 Tables of Dimensions
Tables of Dimensions Needle Roller and Cage Thrust Assemblies . . . . . 542
Needle Roller and Cage Thrust Assemblies . . . . . 526 Thrust Washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 543
Thrust Washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 527
Cylindrical Roller and Cage Thrust Assemblies . . 534 CYLINDRICAL ROLLER THRUST BEARINGS –
METRIC SERIES
Cylindrical Roller Thrust Bearings . . . . . . . . . . . . . 536
Cylindrical Roller and Cage Thrust Assemblies
and Thrust Washers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 544
Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 544
Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 545
Dimensional Accuracy . . . . . . . . . . . . . . . . . . . . . . . 545
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 545
Table of Dimensions
Cylindrical Roller Thrust Assemblies . . . . . . . . . . . 546
Bearing Thrust Washers . . . . . . . . . . . . . . . . . . . . . . 547
521
Types of Inch Series Thrust Assemblies, Thrust Bearings and Thrust Washers.
NTA
Needle roller and cage thrust assembly
NTH
Cylindrical roller and cage thrust assembly
NTHA
Cylindrical roller thrust bearing
TRA…TRD
Thrust washers
522
523
Bore Inspection Procedure For Thrust Washer the shaft must clear the cage bore under all conditions. It will
The bore diameter (d) of the thrust washer should be checked be noted that the mounting dimensions are given in the tabular
with “go” and “no go”” plug gages. The “go” plug gage size is data for both shaft and housing piloting. Bore inspection
the minimum bore diameter of the thrust washer. The “no go” procedure for the assembly given on page 523 should be
plug gage size is the maximum bore diameter of the thrust used for checking the bore of NTH assemblies.
washer.
The thrust washer, under its own weight, must fall freely Thrust washers for use with cylindrical roller
from the “go” plug gage. “The “no go” plug gage must not and cage thrust assemblies
enter the bore. Where the “no go” plug gage can be forced Types TRID and TRJD thrust washers for use with cylindrical
through the bore, the thrust washer must not fall from the roller and cage thrust assemblies are designed to pilot from
gage under its own weight. the housing and to clear the shaft. Types TRI and TRJ thrust
washers are designed to pilot from the shaft and clear the
Tolerances for cylindrical roller thrust bearings housing. The thrust washers should be stationary with respect
The tolerances for inch series cylindrical roller thrust bearings, to their piloting (or locating) machine members. There should
cylindrical roller cage and thrust assemblies and their corre- be no rubbing action between the washer and any other
sponding component thrust washers appear in the tabular machine member.
data.
Backup surfaces
MOUNTING TOLERANCES In some applications it is desirable to use the back up surfaces
Needle roller and cage thrust assemblies as raceways for the rollers of the thrust assemblies. When
On NTA inch type needle roller and cage thrust assemblies the this is done, these surfaces must be hardened to an equivalent
cage bore has a larger contact area and a closer tolerance of at least 58 HRC. If this hardness cannot be achieved and
than the outside diameter. Therefore, bore piloting is preferred thrust washers cannot be used, the load ratings must be re-
for these assemblies. To reduce wear it is recommended that duced as explained in the Needle Bearing Engineering section
the piloting surface for the cage be hardened to an equivalent of this catalog.
of at least 55 HRC. Thrust raceway surfaces must be ground to a surface of 8
Where design requirements prevent bore piloting, the NTA µin Ra. When this requirement cannot be met, thrust washers
needle roller and cage thrust assemblies may be piloted on the must be used.
outside diameters. It should be noted that the “diameter to The raceways against which the rollers operate, or the
clear washer o.d.” given in the tabular data is not suitable for surfaces against which the thrust washers bear, must be
outside diameter piloting. For such cases suitable o.d. piloting square with the axis of the shaft. Equally important, the race-
dimensions should be determined in consultation with a way, or surface backing the thrust washer, must not be dished
Timken sales engineer. or coned. The permissible limits of out-of-squareness and
dishing or coning are shown in figures 1 and 2 below.
Thrust washers for use with NTA needle roller and
cage thrust assemblies
Ideally, a thrust washer should be stationary with respect to,
and piloted by, its supporting or backing member, whether or Out of Square Dished or Coned
not this is an integral part of the shaft or housing. There should Surface Surface
be no rubbing action between the thrust washer and any other
MAXIMUM ANGLE
machine member. The economics of design, however, often MAXIMUM ANGLE
ARCTAN 0.0005 ARCTAN 0.001
preclude these ideal conditions and thrust washers must be
employed in another manner. In such cases design details
should be determined in consultation with a Timken sales
engineer.
524
SPECIAL DESIGNS
Figure 3 Figure 4 Needle roller and cage thrust assemblies and thrust washers
are also made to special dimensions and configurations, as
well as from special materials, when quantities permit
LOAD RATINGS economical manufacture.
Needle roller and cage thrust assemblies are particularly
3
Minimum axial load
adaptable to low cost integral combination with special thrust
Slippage can occur if the applied axial load is too light and the
washers. When the use of such special designs is consid-
operating speed of the needle roller and cage thrust assembly
ered, the following pages should be reviewed for evaluation
is high, particularly if accompanied by inadequate lubrication.
of proposed arrangements.
For satisfactory operation a certain minimum load must be
applied to a needle roller and cage thrust assembly which can
be calculated from:
where
C0 — static load rating [lbf]
Famin — minimum axial load [lbf]
525
DC DC1 Ea S E
b
raceway hardness
NTA to be 58 HRC or
equivalent
5⁄ 16 0.312 0.750 0.0781 0.40 0.64 NTA-512 0.004 1 310 2 960 24 000
3⁄ 8 0.375 0.812 0.0781 0.46 0.71 NTA-613 0.004 1 360 3 220 22 000
1⁄ 2 0.500 0.937 0.0781 0.59 0.83 NTA-815 0.005 1 610 4 300 19 000
9⁄ 16 0.562 1.000 0.0781 0.65 0.89 NTA-916 0.006 1 730 4 840 18 000
5⁄ 8 0.625 1.125 0.0781 0.71 1.02 NTA-1018 0.007 2 200 6 830 15 000
526
3⁄ 8
0.312
0.375
0.750
0.812
0.060
0.030
0.063
0.032
TRB-512
TRA-613
0.006
0.003
NTA-512
NTA-613
0.309
0.372
0.312
0.375
0.781
0.844
3
0.375 0.812 0.060 0.063 TRB-613 0.006 NTA-613 0.372 0.375 0.844
0.375 0.812 0.092 0.095 TRC-613 0.009 NTA-613 0.372 0.375 0.844
1⁄ 2 0.500 0.937 0.030 0.032 TRA-815 0.004 NTA-815 0.497 0.500 0.969
0.500 0.937 0.060 0.063 TRB-815 0.008 NTA-815 0.497 0.500 0.969
0.500 0.937 0.092 0.095 TRC-815 0.012 NTA-815 0.497 0.500 0.969
9⁄ 16 0.562 1.000 0.030 0.032 TRA-916 0.005 NTA-916 0.559 0.562 1.031
0.562 1.000 0.060 0.063 TRB-916 0.008 NTA-916 0.559 0.562 1.031
0.562 1.000 0.092 0.095 TRC-916 0.013 NTA-916 0.559 0.562 1.031
5⁄ 8 0.625 1.125 0.030 0.032 TRA-1018 0.006 NTA-1018 0.622 0.625 1.156
0.625 1.125 0.060 0.063 TRB-1018 0.012 NTA-1018 0.622 0.625 1.156
0.625 1.125 0.092 0.095 TRC-1018 0.018 NTA-1018 0.622 0.625 1.156
0.625 1.125 0.123 0.126 TRD-1018 0.024 NTA-1018 0.622 0.625 1.156
0.625 1.125 0.154 0.157 TRE-1018 0.029 NTA-1018 0.622 0.625 1.156
Recommendation for an application requiring o.d. piloting should be determined in ∆ If the shaft and the housing adjacent to the bearing o.d. are not concentric, the T.I.R.
consultation with a Timken sales engineer. between the shaft and housing should be added to this dimension.
527
DC DC1 Ea S E
b
raceway hardness
NTA to be 58 HRC or
equivalent
0.875 1.687 0.0781 1.02 1.57 NTC-1427 0.017 4 150 17 600 9 800
1 1.000 1.562 0.0781 1.09 1.45 NTA-1625 0.013 3 110 12 100 11 000
1 1⁄ 8 1.125 1.750 0.0781 1.21 1.64 NTA-1828 0.019 3 750 16 000 9 600
1 1⁄ 4 1.250 1.937 0.0781 1.34 1.82 NTA-2031 0.021 4 530 21 000 8 600
528
529
DC DC1 Ea S E
b
raceway hardness
NTA to be 58 HRC or
equivalent
1 1⁄ 2 1.500 2.187 0.0781 1.59 2.07 NTA-2435 0.025 5 220 26 500 7 600
1 3⁄ 4 1.750 2.500 0.0781 1.84 2.32 NTA-2840 0.031 5 690 30 900 6 800
2 2.000 2.750 0.0781 2.09 2.57 NTA-3244 0.033 5 400 29 800 6 100
2 1⁄ 8 2.125 2.875 0.0781 2.22 2.70 NTA-3446 0.036 5 490 30 900 5 800
2 1⁄ 4 2.250 3.000 0.0781 2.34 2.82 NTA-3648 0.038 5 570 32 000 5 600
530
THRUST WASHERS
Dimensions for bore and o.d. of thrust needle roller and cage
h
assemblies and thrust washers are nominal. Inspection h
dimensions are shown in the tolerance tables on page 523.
Thrust washers are burnished for at least one-quarter of
the bore area with the remainder a rough breakaway finish.
The o.d. of the washers will be as blanked. Due to distortion in
the hardening, the thinner washers may be out of flat in the S
free state but can be expected to flatten under load. d d1 d H
See page 524 for discussion of piloting and back-up
surfaces.
1 3⁄ 4 1.750 2.500 0.030 0.032 TRA-2840 0.021 NTA-2840 1.747 1.750 2.531
1.750 2.500 0.060 0.063 TRB-2840 0.044 NTA-2840 1.747 1.750 2.531
1.750 2.500 0.092 0.095 TRC-2840 0.063 NTA-2840 1.747 1.750 2.531
1.750 2.500 0.123 0.126 TRD-2840 0.084 NTA-2840 1.747 1.750 2.531
1.750 2.500 0.185 0.188 TRF-2840 0.126 NTA-2840 1.747 1.750 2.531
2 2.000 2.750 0.030 0.032 TRA-3244 0.024 NTA-3244 1.997 2.000 2.781
2.000 2.750 0.060 0.063 TRB-3244 0.048 NTA-3244 1.997 2.000 2.781
2.000 2.750 0.092 0.095 TRC-3244 0.072 NTA-3244 1.997 2.000 2.781
2.000 2.750 0.123 0.126 TRD-3244 0.096 NTA-3244 1.997 2.000 2.781
2.000 2.750 0.185 0.188 TRF-3244 0.145 NTA-3244 1.997 2.000 2.781
2 1⁄ 8 2.125 2.875 0.030 0.032 TRA-3446 0.026 NTA-3446 2.122 2.125 2.906
2.125 2.875 0.060 0.063 TRB-3446 0.052 NTA-3446 2.122 2.125 2.906
2.125 2.875 0.092 0.095 TRC-3446 0.078 NTA-3446 2.122 2.125 2.906
2.125 2.875 0.123 0.126 TRD-3446 0.103 NTA-3446 2.122 2.125 2.906
2 1⁄ 4 2.250 3.000 0.030 0.032 TRA-3648 0.026 NTA-3648 2.247 2.250 3.031
2.250 3.000 0.060 0.063 TRB-3648 0.048 NTA-3648 2.247 2.250 3.031
2.250 3.000 0.092 0.095 TRC-3648 0.081 NTA-3648 2.247 2.250 3.031
2.250 3.000 0.123 0.126 TRD-3648 0.105 NTA-3648 2.247 2.250 3.031
2.250 3.000 0.185 0.188 TRF-3648 0.157 NTA-3648 2.247 2.250 3.031
Recommendation for an application requiring o.d. piloting should be determined in ∆ If the shaft and the housing adjacent to the bearing o.d. are not concentric, the T.I.R.
consultation with a Timken sales engineer. between the shaft and housing should be added to this dimension.
531
DC DC1 Ea S E
b
raceway hardness
NTA to be 58 HRC or
equivalent
2 1⁄2 2.500 3.250 0.0781 2.59 3.07 NTA-4052 0.041 5 740 34 200 5 100
2 3⁄4 2.750 3.625 0.1250 2.86 3.46 NTA-4458 0.082 10 700 57 500 4 600
3 3.000 3.750 0.0781 3.09 3.57 NTA-4860 0.048 6 060 38 700 4 400
3 1⁄4 3.250 4.125 0.1250 3.36 3.96 NTA-5266 0.092 11 600 66 300 4 000
3 3⁄4 3.750 4.625 0.1250 3.86 4.46 NTA-6074 0.110 12 600 77 400 3 500
4 1⁄8 4.125 5.062 0.1250 4.23 4.90 NTA-6681 0.136 14 300 93 200 3 200
532
THRUST WASHERS
Dimensions for bore and o.d. of thrust needle roller and cage
h
assemblies and thrust washers are nominal. Inspection h
dimensions are shown in the tolerance tables on page 523.
Thrust washers are burnished for at least one-quarter of
the bore area with the remainder a rough breakaway finish.
The o.d. of the washers will be as blanked. Due to distortion
in the hardening, the thinner washers may be out of flat in S
the free state but can be expected to flatten under load. d d1 d H
See page 524 for discussion of piloting and back-up
surfaces.
2 3⁄ 4
2.500
2.750
3.250
3.625
0.123
0.030
0.126
0.032
TRC-4052
TRA-4458
0.119
0.039
NTA-4052
NTA-4458
2.497
2.747
2.500
2.750
3.281
3.656
3
2.750 3.625 0.060 0.063 TRB-4458 0.077 NTA-4458 2.747 2.750 3.656
2.750 3.625 0.092 0.095 TRC-4458 0.113 NTA-4458 2.747 2.750 3.656
2.750 3.625 0.123 0.126 TRD-4458 0.152 NTA-4458 2.747 2.750 3.656
2.750 3.625 0.185 0.188 TRF-4458 0.229 NTA-4458 2.747 2.750 3.656
3 3.000 3.750 0.030 0.032 TRA-4860 0.034 NTA-4860 2.997 3.000 3.781
3.000 3.750 0.060 0.063 TRB-4860 0.070 NTA-4860 2.997 3.000 3.781
3.000 3.750 0.123 0.126 TRD-4860 0.135 NTA-4860 2.997 3.000 3.781
3 1⁄4 3.250 4.125 0.030 0.032 TRA-5266 0.044 NTA-5266 3.247 3.250 4.156
3.250 4.125 0.123 0.126 TRD-5266 0.176 NTA-5266 3.247 3.250 4.156
3 3⁄4 3.750 4.625 0.030 0.032 TRA-6074 0.050 NTA-6074 3.747 3.750 4.656
3.750 4.625 0.060 0.063 TRB-6074 0.101 NTA-6074 3.747 3.750 4.656
3.750 4.625 0.092 0.095 TRC-6074 0.152 NTA-6074 3.747 3.750 4.656
3.750 4.625 0.123 0.126 TRD-6074 0.202 NTA-6074 3.747 3.750 4.656
4 1⁄8 4.125 5.062 0.030 0.032 TRA-6681 0.059 NTA-6681 4.122 4.125 5.094
4.125 5.062 0.092 0.095 TRC-6681 0.178 NTA-6681 4.122 4.125 5.094
4.125 5.062 0.123 0.126 TRD-6681 0.240 NTA-6681 4.122 4.125 5.094
4.125 5.062 0.185 0.188 TRF-6681 0.354 NTA-6681 4.122 4.125 5.094
Recommendation for an application requiring o.d. piloting should be determined in ∆ If the shaft and the housing adjacent to the bearing o.d. are not concentric, the T.I.R.
consultation with a Timken sales engineer. between the shaft and housing should be added to this dimension.
533
DC D C1
NTH
534
Ea E Ea E
b
S H b
S1 H
1
Piloting Dimensions
Shaft Piloting Housing Piloting Raceway Contact
Shaft Assembly Sp Hc Sc Hp Eb Ea
Diameter Designation
Diameter +0.000 +0.005
-0.005 min. max. -0.000 (nom.) (nom.)
inch
1 1⁄ 2 NTH-2448 1.500 3.030 1.442 2.975 1.76 2.71
2 NTH-3258 2.000 3.655 1.942 3.600 2.26 3.32
535
CYLINDRICAL ROLLER
THRUST BEARINGS d1
Check for availability
d
The NTHA thrust cylindrical roller bearing consists of an NTH
cage and roller assembly, one bore piloted washer and one r
o.d. piloted washer. The NTHA bearing is identified and sold as h
a unit, and is manufactured to inch nominal dimensions only. T
Load ratings given are identical to the corresponding NTH
h
thrust cylindrical roller and cage assembly. r
D1
NTHA
Bearing Dimensions
Shaft Piloted Washer Housing Piloted Washer
Shaft d d1 D D1 T Bearing Bearing
Diameter Designation Mass
+0.000
inch (nom.) inch (nom.) -0.006 approx.
min. max. max. min. lb
1 1⁄ 2 1.4993 1.5000 2 15⁄16 3.0007 3.0000 1 9⁄16 0.812 NTHA-2448 1.03
2 3⁄4 2.7488 2.7500 4 13⁄32 4.4693 4.4680 2 13⁄16 1.000 NTHA-4472 2.29
536
Housing Fillet
*ra max.Radius
2 1⁄ 8 NTHA-3460 30 000 97 400 4 500 2.1240 3.7511 0.062 TRJ-3460 0.60 0.3125
TRJD-3460 0.61 0.3125
2 1⁄4 NTHA-3662 31 100 103 000 4 400 2.2489 3.8761 0.062 TRJ-3662 0.62 0.3125
TRJD-3662 0.64 0.3125
2 3⁄ 8 NTHA-3864 32 100 109 000 4 200 2.3739 4.0011 0.062 TRJ-3864 0.65 0.3125
TRJD-3864 0.66 0.3125
2 1⁄ 2 NTHA-4066 33 000 115 000 4 100 2.4989 4.1263 0.062 TRJ-4066 0.67 0.3125
TRJD-4066 0.69 0.3125
2 5⁄ 8 NTHA-4270 35 100 125 000 3 900 2.6238 4.3443 0.062 TRJ-4270 0.75 0.3125
TRJD-4270 0.77 0.3125
2 3⁄ 4 NTHA-4472 36 100 132 000 3 800 2.7488 4.4693 0.062 TRJ-4472 0.78 0.3125
TRJD-4472 0.80 0.3125
3 NTHA-4876 38 000 144 000 3 600 2.9988 4.7195 0.062 TRJ-4876 0.83 0.3125
TRJD-4876 0.85 0.3125
3 1⁄ 4 NTHA-5280 39 900 157 000 3 400 3.2487 4.9695 0.062 TRJ-5280 0.89 0.3125
TRJD-5280 0.91 0.3125
3 1⁄ 2 NTHA-5684 40 500 163 000 3 200 3.4987 5.2195 0.062 TRJ-5684 0.94 0.3125
TRJD-5684 0.96 0.3125
* ras max is equal to minimum washer chamfer rs min.
537
AXK, FNT LS AS
Needle roller & cage thrust assembly Heavy thrust washer Thin thrust washer
WS.811 GS.811
Shaft piloted washer Housing piloted washer
CONSTRUCTION
Needle roller and cage thrust assemblies
The needle roller and cage thrust assembly (series FNT) has These cage assemblies have a very thin section and when
a two piece steel cage and through hardened needle rollers they must run directly against the back up surface raceways
which are precision finished to close tolerances for optimum their section may be 2 to 5mm which is equivalent to the
load distribution. The cage is comprised of two mating pieces diameter of the needle rollers used.
that are securely fastened together. When the back up surfaces cannot be hardened and
Series AXK needle roller and cage thrust assembly, which ground, hardened washers of different thicknesses are
can be used interchangeably with the FNT assembly, has a available.
one piece cage. The cage is similar in design to the success-
ful profiled radial steel cages.
538
THRUST WASHERS Table 1 – Tolerances for Outside Diameter (Dc) and Bore
Ideally, a thrust washer should be stationary with respect to, Diameter (Dc1) of Series FNT and AXK Needle Roller and
and piloted by, its supporting or backing member, whether or Cage Thrust Assemblies
not this is an integral part of the shaft or housing. There
Dc Deviations of Dc1 Deviations of
should be no rubbing action between the thrust washer and max. outside dia. min. bore dia.
any other machine member. Some thrust washers are de- mm (c12) mm (E11)
signed for bore piloting others may be piloted by their outside µm µm
diameter. > ≤ high low > ≤ low high
18 30 -110 -320 3 6 +20 +95
Thin thrust washers (AS) 30 40 -120 -370 6 10 +25 +115
The metric series thin thrust washers are made of hardened 40 50 -130 -380 10 18 +32 +142
spring steel. They may be out of flat due to heat treatment, 50 65 -140 -440 18 30 +40 +170
but will flatten under load. Thin washers are used when the 65 80 -150 -450 30 50 +50 +210
80 100 -170 -520 50 80 +60 +250
supporting or backing members cannot be adequately pre-
100 120 -180 -530 80 120 +72 +292
pared as raceways for the needle rollers. These washers are 120 140 -200 -600
only 1 mm thick (dimension s) and provide a very compact
and cost-effective bearing arrangement. Although they are
usually guided on the shaft, they may be housing-guided Bore inspection procedure for assembly
when required by application. If an inspection of the bore diameter is desired, the bore
diameter (Dc1) of the assembly should be checked with “go”
Heavy thrust washers (LS) and “no go” plug gages. The “go” plug gage size is the
These metric series thrust washers are made of bearing minimum bore diameter of the assembly. The “no go” plug
quality steel, hardened and precision ground on the flat race- gage size is the maximum bore diameter of the assembly.
way surfaces. Their bores and outside diameters are not The assembly, under its own weight, must fall freely from
ground but provide satisfactory surfaces for shaft piloting or the “go” plug gage. The “no go” plug gage must not enter
housing piloting arrangements. the bore. Where the “no go” plug gage can be forced
through the bore, the assembly must not fall from the gage
Shaft piloted washers (WS.811) and under its own weight.
housing piloted washers (GS.811)
Tolerances for thrust washers
These shaft piloted and housing piloted metric series thrust
Tolerances for the bore diameters of series WS, shaft piloted
washers are primarily for use with metric series cylindrical
thrust washers are given in Table 10 on page E99 of the
roller thrust bearings of series 811. They are made of bear-
ing quality steel with, hardened and precision ground and
Needle Bearing Engineering section. Tolerances for the 3
outside diameters of series GS, housing piloted thrust wash-
lapped flat raceway surfaces. The tolerances of the thrust
ers are given in Table 11 on page E100 of the Needle Bear-
bearing bore and outside diameter shown in Tables 10 & 11
ing Engineering section.
(pages E99 & E100) apply to shaft and housing piloted
Tolerances for the outside and bore diameters of series
washers.
AS thrust washers are given in Table 2. Thickness tolerance
for series AS thrust washers is +0,05mm.
DIMENSIONAL ACCURACY
Tolerances for needle roller and cage thrust Table 2 – Tolerances for Outside Diameter (d1) and Bore
assemblies Diameter (d ) of Series AS Thrust Washers.
Pages 542 to 543 list the nominal outside diameter, bore
diameter and needle roller diameter for the FNT and AXK d1 Deviations of d Deviations of
series of needle roller and cage thrust assemblies and also max. outside dia. min. bore dia.
mm (e13) mm (E12)
the nominal outside diameter and bore diameter of the series µm µm
AS, LS, WS and GS thrust washers. Thickness tolerances
for the AS and LS thrust washers are also included. > ≤ high low > ≤ low high
Tolerances for the outside and bore diameters of series 18 30 -40 -370 3 6 +20 +140
FNT and AXK needle roller and cage thrust assemblies are 30 50 -50 -440 6 10 +25 +175
50 80 -60 -520 10 18 +32 +212
given in Table 1. The needle rollers in any one assembly 80 120 -72 -612 18 30 +40 +250
have a group tolerance of 2 µm. 120 180 -85 -715 30 50 +50 +300
180 250 -100 -820 50 80 +60 +360
80 120 +72 +422
120 180 +85 +485
Tolerances for the outside and bore diameters of series LS
heavy thrust washers are given in Table 3. Thickness toler-
ances for series LS heavy thrust washers are given in tabu-
lar pages.
539
Thrust washers
The mounting tolerances for series AS, LS, WS and GS thrust
washers for use with needle roller and cage thrust assemblies
are given in Table 4.
As for the FNT and AXK series thrust assemblies, to re-
duce wear, the piloting surface for the thrust washers should
also be hardened to an equivalent of at least 55 HRC.
540
MAXIMUM ANGLE
MAXIMUM MAXIMUMANGLE
ANGLE
ARCTAN 0,0005
ARCTAN 0.0005
MAXIMUM
ARCTAN0,001
ARCTAN 0.001 LUBRICATION
Oil is the preferred lubricant for needle roller and cage thrust
assemblies and an ample oil flow is absolutely necessary for
high speeds, or for moderate speeds when the load is rela-
tively high.
When the application must utilize grease lubrication the
needle roller and cage thrust assembly should be ordered
pregreased. When the speeds are low, and rotation is not
continuous, the initial charge of grease may be suitable for the
life of the application. When the speeds are moderate, how-
ever, the designer must provide for frequent regreasing.
Since the needle rollers tend to expel the lubricant radially
outward, relubrication passages should be directed to the bore
Out of Square Dished or Coned of the cage whether oil or grease is used as the lubricant.
Surface Surface
Figure 1 Figure 2 SPECIAL DESIGNS
Needle roller and cage thrust assemblies and thrust washers
are also made to special dimensions and configurations, as
LOAD RATINGS well as from special materials, when quantities permit eco-
Minimum axial load nomical manufacture.
Slippage can occur if the applied axial load is too light and the Needle roller and cage thrust assemblies are particularly
operating speed of the needle roller and cage thrust assembly adaptable to low cost integral combination with special thrust
is high, particularly if accompanied by inadequate lubrication. washers. When the use of such special designs is consid-
For satisfactory operation a certain minimum load must be ered, the following pages should be reviewed for evaluation
applied to a needle roller and cage thrust assembly which can of proposed arrangements.
be calculated from:
where
541
Dc1
Dw
Dc
Eb
110 110 145 4 115 143 0,6 AXK110145 0,117 93,2 591 2 800
120 120 155 4 125 153 0,6 AXK120155 0,126 98,5 650 2 700
130 130 170 5 136 167 0,6 AXK130170 0,198 132 829 2 400
140 140 180 5 146 177 0,6 AXK140180 0,212 136 887 2 300
150 150 190 5 156 187 0,6 AXK150190 0,225 141 944 2 200
160 160 200 5 166 197 0,6 AXK160200 0,238 146 1000 2 100
1) When using a good quality lubricating grease the maximum allowable operating speed should not be greater
than 25% of the limiting speed values for lubrication with oil.
542
d1 d d1 d d d1 D1 D
45°
s h
AS LS WS.811 GS.811
17
20
17
20
18
21
30
35
1
1
2,75
2,75
0,5
0,5
0,3
0,3
AS1730
AS2035
0,003
0,005
LS1730
LS2035
0,011
0,014
WS.81103
WS.81104
GS.81103
GS.81104
0,011
0,014
3
25 25 26 42 1 3 1 0,6 AS2542 0,007 LS2542 0,021 WS.81105 GS.81105 0,021
75 75 77 100 1 5,75 1,5 1 AS75100 0,027 LS75100 0,15 WS.81115 GS.81115 0,155
80 80 82 105 1 5,75 1,5 1 AS80105 0,028 LS80105 0,158 WS.81116 GS.81116 0,165
85 85 87 110 1 5,75 1,5 1 AS85110 0,028 LS85110 0,166 WS.81117 GS.81117 0,173
90 90 92 120 1 6,5 1,5 1 AS90120 0,038 LS90120 0,245 WS.81118 GS.81118 0,253
100 100 102 135 1 7 1,5 1 AS100135 0,05 LS100135 0,345 WS.81120 GS.81120 0,355
110 110 112 145 1 7 1,5 1 AS110145 0,055 LS110145 0,373 WS.81122 GS.81122 0,385
120 120 122 155 1 7 1,5 1 AS120155 0,059 LS120155 0,405 WS.81124 GS.81124 0,415
130 130 132 170 1 9 1,5 1 AS130170 0,074 LS130170 0,65 WS.81126 GS.81126 0,666
140 140 142 180 1 9,5 1,5 1 AS140180 0,078 LS140180 0,71 WS.81128 GS.81128 0,716
150 150 152 190 1 9,5 1,5 1 AS150190 0,083 LS150190 0,756 WS.81130 GS.81130 0,761
160 160 162 200 1 9,5 1,5 1 AS160200 0,088 LS160200 0,802 WS.81132 GS.81132 0,805
543
TYPES OF METRIC SERIES CYLINDRICAL ROLLER THRUST BEARINGS AND THEIR COMPONENTS.
SUFFIXES
LPB machined light metal window type cage.
TVP molded window type cage of glass reinforced nylon.
544
Where
C0 – static load rating (kN)
Fa min – minimum axial load (kN)
545
d ra
r Dc1
T Dw
r
Dc ra
D1
D Eb
811, 812 K811, K812 Raceway contact dimensions
Load Ratings
Shaft Thrust Assembly Dimensions Limiting
Diameter Thrust Mass Dynamic Static speed
Dc1 Dc Dw T Eb Ea ras max Assembly approx. C C0 Oil
mm E11 a13 max min Designation kg. kN rpm
15 15 28 3,5 9 18 25 0,3 K.81102TVP 0,006 12,8 28,6 12 000
546
d D1
h r h
r
d1 D
35
30
35
32
37
52
52
4,25
3,5
0,6
0,6
WS.81206
WS.81107
GS.81206
GS.81107
0,047
0,032
3
35 37 62 5,25 1 WS.81207 GS.81207 0,085
547
RC - 10 14 10 - FS
Bore Width
10 = 10⁄16 = 5⁄8" 10 = 10⁄16 = 5⁄8"
Bore, in millimeters
FCL - 10 - K
Metric Series
FCS, FC-Kregular clutch, single roller per stainless steel spring
FCregular clutch, multi-roller per stainless steel spring
FCL-Klight series clutch, single roller per stainless steel spring
FCBregular clutch and bearing assembly, multi-roller per
stainless steel spring
FCBL-K, FCBN -K light series clutch and bearing assembly, single roller
per stainless steel spring
548
Drawn
Cup
Roller Clutches
Page Page
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 550 DC ROLLER CLUTCHES – METRIC SERIES
Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 550 Dimensions, Ratings, Gauging and Mounting . . . . 556 - 557
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 550
Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 551 DC ROLLER CLUTCH AND BEARING ASSEMBLIES –
Construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 551 METRIC SERIES
Special Clutches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 551 Dimensions, Ratings, Gauging and Mounting . . . . 558 - 559
549
The Timken Torrington drawn cup roller clutch transmits torque between
the shaft and housing in one direction and allows free overrun in the CLU
TC
C LU
H
TC
H
LO C
L OC
K
DESIGN
The patented design utilizes the same low profile radial section as drawn Two basic configurations are produced:
cup needle roller bearings. The units are compact, light in weight and clutch only - Use with external radial support (usually two drawn
operate directly on a hardened shaft. Proper mounting is easily cup needle roller bearings). Separate bearings position the shaft and
accomplished with a simple press fit in the housing. housing concentrically and carry the radial load during overrun.
Precisely formed interior ramps provide surfaces against which the
rollers wedge to positively lock the clutch with the shaft when rotated in
the proper direction. Transition from the overrun to locked operation
normally occurs with minimal lost motion (backlash).
Clutch Only
OPERATION
Operation is in two modes; the overrun mode and the lock mode. In the lock mode shown in the drawings below, the relative rotation
Operational mode is controlled by the direction of the clutch or shaft between the housed clutch and the shaft is opposite to that in the
rotation with respect to the locking ramps. overrun mode. The rollers, assisted by the leaf type springs, become
wedged between the locking ramps and the shaft to transmit torque
In the overrun mode shown in the drawings below, the relative between the two members. Either the member housing the clutch drives
rotation between the housed clutch and the shaft causes the rollers to the shaft in one direction, or the shaft can drive the clutch and its
move away from their locking position against the locking ramps in the housing member in the other direction.
drawn cup. The housing and the clutch are thus free to overrun in one
direction, or the shaft is free to overrun in the other direction.
CL
CL
CL
ST
UT
UT
UT
UT
IONA
S TAT (DRIVER) (DRIVEN)
RO
RO
RO
K
CK
CK
AT
RY OVERRUNS
CH
CH
CH
CH
LOC
LOC
TA
TA
TAT
IO
IS
LO
LO
T
T
NA
ES
COUNTER-CLOCKWISE
ES
ES
RY
550
IDENTIFICATION
The prefix letters in the designation of the Torrington drawn cup roller
clutches and drawn cup roller clutch and bearing assemblies denote
whether these are manufactured to inch or metric nominal dimensions.
Designation codes for clutches and clutch and bearing assemblies with
inch nominal dimensions begin with the letter “R”. Those for clutches
and clutch and bearing assemblies with metric nominal dimensions
begin with the letter “F”.
The basic types of clutches and clutch and bearing assemblies are
listed below:
CONSTRUCTION
In many respects, construction is similar to that of drawn cup bearings.
Design and manufacture of drawn cup clutches, just as with drawn cup
bearings, was pioneered and developed by Torrington.
The well established design utilizes the same low profile radial
section as drawn cup bearings. The precisely formed interior ramps
provide surfaces against which the needle rollers wedge to positively Drawn Cup Roller Clutch Drawn Cup Clutch and
lock the clutch with the shaft when rotated in the proper direction. Type FC Bearing Assembly
These ramps formed during the operation of drawing the cup, are with Steel Springs Type FCB
with Steel Springs
3
case hardened to assure long wear life. The incorporation of ramp
forming into the cup drawing operation is a manufacturing innovation
that contributes much to the low cost of the unit.
Two types of precision molded clutch cages are employed. Types RC
and RCB utilize a one-piece cage of acetal resin plastic with integral leaf
style springs. Types FC, FC-K, FCS, FCL-K, RC-FS, FCB, FCBL-K,
FCBN-K, and RCB-FS use a glass fiber reinforced nylon cage equipped
with inserted stainless steel leaf springs. The stainless steel springs
permit higher rates of engagement, and achieve a greater spring life.
Drawn Cup Roller Clutch Drawn Cup Clutch and
The nylon cage permits operation at higher temperatures than the acetal Types FCS, FC-K, FCL-K and RC-FS Bearing Assembly
resin cage. with Steel Springs Types FCBL-K, FCBN-K,
Types RCB, FCB, FCBL-K, FCBN-K, and RCB-FS clutch and bearing and RCB-FS
assemblies have cages for retention and guidance of the rollers in the with Steel Springs
bearings located on both sides of the clutch unit.
SPECIAL CLUTCHES
Timken manufactures many special Torrington clutches not listed in this
catalog. Where volume justifies tooling costs, special clutches may result
in a lower unit cost or, in the event of additional costs, may provide an
economical solution to an unusual design problem. If you think a special
clutch is indicated, please contact your local Timken sales engineer for a
review of your application.
551
APPLICATION
Timken Torrington clutches and clutch and bearing assemblies are
successfully applied in a wide range of commercial products where
indexing, backstopping and overrunning operations must be performed
reliably. The sketches on these pages illustrate some of the many
possible uses.
When applying the clutch-only unit, separate bearings on each side
of the clutch are required to position the shaft concentrically with the Stair Steppers
housing and to carry the radial loads during overrun. Drawn cup needle Nordic Trak and other
roller bearings with the same radial section as the clutch should be Athletic Equipment
used in the through bored housings for simplicity and economy. Two
clutches can be used side by side for greater torque capacity.
Where the radial loads are light, the clutch and bearing assembly
can be used without additional support bearings. This reduces the
overall assembly width, the number of stocked and ordered parts, and
assembly costs as well.
Lawnmower
Differential
HOUSING DESIGN
Drawn cup clutches and clutch and bearing assemblies are mounted
with a simple press fit in their housings. Through bored and chamfered
housings are preferred. Provisions for axial location, such as shoulders
or snap rings, are not required. The case hardened cups have a long
fatigue life, but must be properly supported to realize this benefit. Steel
housings are preferred and must be used for applications involving high
torque loads to prevent radial expansion of the clutch cups. The
Rack Indexing Drive recommended minimum housing outside diameters in the tables of
dimensions are for steel.
The taper within the length of the outer ring should not exceed
0.0005 inch or 0.013 mm.
The surface finish of the housing bore should not exceed 125
Motor microinches, a.a. (arithmetic average) or 3.2µm (on the Ra scale).
Backstops
Low strength housings (non-steel, sintered metals and some
plastics) may be entirely satisfactory in lightly loaded applications.
When using non-steel housings, thoroughly test designs.
2-Speed Gearbox
with
Reversing Input
3
SHAFT DESIGN
The clutch or clutch and bearing assembly operates directly on the
shaft whose specifications of dimensions, hardness and surface finish
are well within standard manufacturing limits.
Either case hardening or through hardening grades of good bearing
quality steel are satisfactory for raceways. Steels which are modified for
free machining, such as those high in sulfur content and particularly
those containing lead, are seldom satisfactory for raceways.
For long fatigue life, the shaft raceway, must have a hardness
Timing Motor
Freewheels equivalent to 58 HRC (ref, ASTM E-18), and ground to the recom-
mended diameter shown in the tables of dimensions. It may be through
hardened, or it may be case hardened, with an effective case depth of
0.030 inch (0.8 mm) (Effective case depth is defined as the distance
from the surface inward to the equivalent of 50 HRC hardness level
after grinding.)
Taper within the length of the raceway should not exceed 0.0003
inch (0.008 mm), or one-half the diameter tolerance, whichever is
smaller. The radial deviation from true circular form of the raceway
should not exceed .0001 inch (0.0025 mm) for diameters up to and
including 1 inch (25.4 mm). For raceways greater than 1.0 inch or
25mm the allowable radial deviation may be greater than .0001 inch
(0.0025 mm) by a factor of raceway diameter (in inches) divided by 1.0
or a factor of raceway diameter (in mm) divided by 25.4. Surface finish
Washing Machine on the raceway should not exceed 16 microinches a.a. (arithmetic
Transmission average) or 0.4 µm (on the Ra scale). Deviations will reduce the load
capacity and fatigue life of the shaft.
553
INSTALLATION
Simplicity of installation promotes additional cost savings. The drawn cup
roller clutch, or the clutch and bearing assembly, must be pressed into its
housing. Procedures are virtually identical with those for installing drawn
cup bearings as detailed on page 393. The unit is pressed into the bore
of a gear hub or pulley hub, or housing of the proper size, and no
shoulders, splines, keys, screws or snap rings are required.
Amount
of
Recess
15°
Use
"O" Ring
on Pilot
Pilot Dia. is
Long Lead 0.02" ( 0.5mm )
on Pilot less than nom.
Shaft Dia. "O" Ring holds unit on
Pilot during installation
Use an arbor press or hydraulic ram press which will exert Use an installation tool as shown in the diagram above. If clutch is
steady pressure. Never use a hammer or other tool requiring straddled by needle roller bearings, press units into position in
pounding to drive the clutch into its housing. proper sequence and preferably leave a small clearance between
units.
Amount of Recess
Chamfer
554
555
DRAWN CUP ROLLER CLUTCHES – The mounted clutch engages when the
housing is rotated relative to the shaft
METRIC SERIES in the direction of the arrow marking
[➝ LOCK] stamped on the cup.
Shaft raceway and housing bore diameters necessary for
proper mounting and operation are listed on the opposite page.
Types FC, FCS, FC-K and FCL-K clutches have stainless
steel springs inserted in the molded cage to position the rollers
for instantaneous lockup.
C
C C
C
FWw D FFwW
Shaft Dimensions Z
Diameter Minimum Overrun Suitable
Fw D C O.D. of Steel Limiting Drawn
-0,3 Clutch Torque Housing for Speed for Cup
Designation Rating Rated Torque Rotating Shaft Bearing1)
mm N•m mm rpm
4 4 8 6 FC-4-K 0,349 11 26 000 HK0408
6 6 10 12 FCS-6 2,15 14 22 000 HK0608
6 10 12 FC-6 2,63 14 22 000 HK0608
8 8 12 12 FCL-8-K 3,39 17 21 000 HK0808
8 14 12 FC-8 4,42 20 21 000 —
10 10 14 12 FCL-10-K 4,60 20 19 000 HK1010
10 16 12 FC-10 5,82 25 19 000 —
12 12 18 16 FC-12 14,0 27 19 000 HK1212
14 14 20 16 FC-14-K 14,8 29 16 000 HK1412
16 16 22 16 FC-16 21,7 31 14 000 HK1612
20 20 26 16 FC-20-K 30,0 38 11 000 HK2012
20 26 16 FC-20 32,6 38 11 000 HK2012
25 25 32 20 FC-25-K 66,4 46 8 700 HK2512
25 32 20 FC-25 71,0 46 8 700 HK2512
30 30 37 20 FC-30 99,1 51 7 300 HK3012
35 35 42 20 FCS-35 107 56 6 100 HK3512
1) See pages 395 & 396 for other suitable bearing types and sizes.
556
557
DRAWN CUP ROLLER CLUTCH AND The mounted clutch and bearing
assembly engages when the hous-
BEARING ASSEMBLIES – ing is rotated relative to the shaft in
METRIC SERIES the direction of the arrow marking
[ ➝ LOCK] stamped on the cup
Shaft raceway and housing bore diameters necessary for
proper mounting and operation are listed on the opposite page.
Types FCB, FCBL-K, and FCBN-K clutch and bearing
assemblies have stainless steel springs inserted in the molded
cage to position the rollers for instantaneous lockup.
C C
FW D FW
558
559
D FW
RC and RC-FS
* Suffix “-FS” is not always stamped on the clutch cup. Type RC-FS
with stainless steel springs is always readily identified by RED clutch cage.
1) See pages 406 through 416 for other suitable bearing types and sizes.
560
561
D FW
1 1.000 1.313 1.063 RCB-162117-FS* RCB-162117 439 1.9 3 960 3 460 8 700
* Suffix “-FS” is not always stamped on the clutch cup. Type RC-FS with stainless steel springs is
always readily identified by RED clutch cage.
562
.010" MIN.
Inch
0.6255 0.3745 0.3761 0.3775
max.
0.3750
min.
0.3745
min.
0.6245
max.
0.6255
lbs
0.030
3
0.7505 0.4995 0.5011 0.5025 0.5000 0.4995 0.7495 0.7505 0.036
0.8755 0.6245 0.6261 0.6275 0.6250 0.6245 0.8745 0.8755 0.050
0.9995 0.7485 0.7501 0.7515 0.7500 0.7495 0.9995 1.0005 0.057
1.312 0.9985 1.0001 1.0015 1.0000 0.9995 1.3120 1.3130 0.100
563
Page
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 566
CB 14 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 566
565
INTRODUCTION
Some applications in equipment such as conveyor rollers, drawer slides, well as appearance. These include: zinc, cadmium, black oxide, nickel
door tracks and others may permit the use of bearings of less than and chrome. In conditions of high humidity, stainless steel balls should
ABEC-1 quality. For these lighter duty applications Torrington supplies be considered. Material variations for bearing parts such as nylon and
low cost precision machined ball bearings. stainless steel can be supplied to accommodate particular applications.
These bearings feature one-piece outers thus eliminating any To obtain bearings with the above described variations plus other
possibility of the outer raceway spreading or splitting. Rings and balls of special bearing configurations, consult Timken Engineering for details.
precision machined bearings are appropriately heat treated.
Bearings are available with parts coated for corrosion resistance as
CB14A-7
566
Single Row W
Ball Bearings
• Full complement of balls
• Zinc plated races
• Pre-lubricated
• Thrust rating in either direction is 50% of the listed radial rating
• The sum of the radial and thrust loads should not exceed the listed
load rating
• On all standard single row bearings the inner and outer ring faces are B D
flush. When sufficient quantities permit, shoulders on one or both sides
of the inner rings and variations from standard bore may be specified.
• These bearings are designed for light loads and speeds up to 1200 RPM
(1)
LOAD RATING FACTORS Table 1
Radial load ratings given in the tabular data in this catalog are based Speed (RPM) Factor
on a speed of 600 RPM. For radial load ratings at speeds other than
600 RPM, mutiply the listed capacity by the appropriate factor listed 50 3.6
in Table 1. 100 2.7
300 1.4
900 .8
1000 .7
1200 .6
567
(1)
LOAD RATING FACTORS Table 1
Radial load ratings given in the tabular data in this catalog are based Speed (RPM) Factor
on a speed of 600 RPM. For radial load ratings at speeds other than
600 RPM, mutiply the listed capacity by the appropriate factor listed 50 3.6
in Table 1. 100 2.7
300 1.4
900 .8
1000 .7
1200 .6
568
Flange Type
Ball Bearings W1
• Mount directly into wheel hubs, pulleys and conveyor rollers W2
• Full complement of balls
• Zinc plated races
• Pre-lubricated
• Thrust rating in either direction is 50% of the listed radial rating
• The sum of the radial and thrust loads should not exceed the listed
load rating
E B
• All flanges are 1⁄16" thick except sizes F-150 through F-165 where D
flange thickness is 3⁄64"
• These bearings are designed for light loads and speeds up to 1200
RPM
(1)
LOAD RATING FACTORS Table 1
Radial load ratings given in the tabular data in this catalog are based Speed (RPM) Factor
on a speed of 600 RPM. For radial load ratings at speeds other than 50 3.6
600 RPM, mutiply the listed capacity by the appropriate factor listed 100 2.7
in Table 1. 300 1.4
900 .8
1000 .7
1200 .6
569
WHEEL DATA
Part Diameter Width Thread Material Style Bore Hub Load Weight
Type (Dia.) (Dia.) Capacity
inch inch inch inch (lbs.) (lbs.)
13 5
*2BC 2 ⁄16 CUSHION RUBBER BALL ⁄16 1 125 0.3
13 5
2P 2 ⁄16 PLASTIC PLASTIC PLAIN ⁄16 1 75 0.3
5
*3BC 3 1 CUSHION RUBBER BALL ⁄16 1 1⁄8 125 0.5
1
3BC 3 1 CUSHION RUBBER BALL ⁄2 1 1⁄8 125 0.5
3
3BC 3 1 CUSHION RUBBER BALL ⁄8 1 1⁄8 125 0.5
5 1
3BHI 3 1 HARD RUBBER BALL ⁄16 1 ⁄8 225 0.5
1
3BHI 3 1 HARD RUBBER BALL ⁄2 1 1⁄18 225 0.5
3
3BHI 3 1 HARD RUBBER BALL ⁄8 1 1⁄8 225 0.5
3MBC 3 1 5⁄16 CUSHION RUBBER BALL 5
⁄16 1 1⁄2 150 0.6
*3MBC 3 1 5⁄16 CUSHION RUBBER BALL 1
⁄2 1 1⁄2 150 0.6
3MBC 3 1 5⁄16 CUSHION RUBBER BALL 3
⁄8 1 1⁄2 150 0.6
3MBHI 3 1 5⁄16 HARD RUBBER BALL 5
⁄16 1 1⁄2 300 0.6
3MBHI 3 1 5⁄16 HARD RUBBER BALL 1
⁄2 1 1⁄2 300 0.6
1 3 1
4BC 4 1 ⁄8 CUSHION RUBBER BALL ⁄8 1 ⁄4 150 0.9
4BC 4 1 1⁄ 8 CUSHION RUBBER BALL 5
⁄8 1 1⁄4 150 0.9
4BC 4 1 1⁄ 8 CUSHION RUBBER BALL 1
⁄2 1 1⁄4 150 0.9
4BHI 4 1 1⁄ 8 HARD RUBBER BALL 3
⁄8 1 1⁄4 300 0.9
1 1 1
4BHI 4 1 ⁄8 HARD RUBBER BALL ⁄2 1 ⁄4 300 0.9
4WBC 4 1 1⁄ 2 CUSHION RUBBER BALL 3
⁄8 1 3⁄4 200 1.1
*4WBHI 4 1 1⁄ 2 HARD RUBBER BALL 3
⁄8 1 3⁄4 400 1.1
5BC 5 1 1⁄ 8 CUSHION RUBBER BALL 3
⁄8 1 1⁄4 200 1.3
1 1 1
5BC 5 1 ⁄8 CUSHION RUBBER BALL ⁄2 1 ⁄4 200 1.3
5BC 5 1 1⁄ 8 CUSHION RUBBER BALL 5
⁄8 1 1⁄4 200 1.3
5BCG 5 1 1⁄ 8 CUSHION RUBBER BALL 3
⁄8 1 1⁄4 350 1.3
5BHI 5 1 1⁄ 8 HARD RUBBER BALL 3
⁄8 1 3⁄4 250 1.3
1 3 3
5WBC 5 1 ⁄2 CUSHION RUBBER BALL ⁄8 1 ⁄4 250 1.8
5WBHI 5 1 1⁄ 2 HARD RUBBER BALL 3
⁄8 1 3⁄4 500 1.8
*6WBC 6 1 3⁄ 4 CUSHION RUBBER BALL 3
⁄8 1 7⁄8 300 2.7
6WBHI 6 1 3⁄ 4 HARD RUBBER BALL 3
⁄8 1 7⁄8 550 2.7
8BC 8 1 1⁄ 2 CUSHION RUBBER BALL 5
⁄8 2 1⁄4 350 4.3
* Parts that are stocked, on all other inquiries please contact local Timken Kilian supplier for details.
570
Kilian No Rust ®
E1
Ball and
Roller
Bearings
Page Page
Introduction, Shelf Life and Storage Policy . . . . . . . . . . . . . E4 SHAFT AND HOUSING SHOULDERS
Radial Ball Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . E50 - E52
BEARING TYPES
Wide Inner Ring Ball Bearings . . . . . . . . . . . . . . . . . . . . . . . E53
Radial Ball Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E5 - E8
Radial Spherical Roller Bearings . . . . . . . . . . . . . . . . . . . . . . E9 LOAD RATINGS AND LIFE CALCULATIONS
Radial Cylindrical Roller Bearings . . . . . . . . . . . . . . . . . . . . E10 Ball and Roller Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . E54
Radial Tapered Roller Bearings . . . . . . . . . . . . . . . . . . . . . . E11 Load Ratings – Radial Ball Bearings . . . . . . . . . . . . . . . . . . E54
Thrust Ball and Roller Bearings . . . . . . . . . . . . . . . . . . E12 - E13 Life – Radial Ball Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . E54
Dynamic Load Rating Adjustment Factor . . . . . . . . . . . . . . E55
CAGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E14 - E16
Life Adjustment Factors . . . . . . . . . . . . . . . . . . . . . . . E55 - E56
INTERNAL CLEARANCES
Life – Radial Roller Bearings . . . . . . . . . . . . . . . . . . . . . . . . E57
Radial Ball Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . E17 - E18
Equivalent Radial Load:
Radial Spherical Roller Bearings . . . . . . . . . . . . . . . . . E19 - E20
Radial Cylindrical Roller Bearings . . . . . . . . . . . . . . . . . . . . E58
Radial Cylindrical Roller Bearings . . . . . . . . . . . . . . . . . . . . E21
Radial Spherical Roller Bearings . . . . . . . . . . . . . . . . . . . . . E58
Radial Tapered Roller Bearings . . . . . . . . . . . . . . . . . . . . . . E22
Radial Tapered Roller Bearings . . . . . . . . . . . . . . . . . E58 - E59
TOLERANCES
LIFE – THRUST SPHERICAL, CYLINDRICAL AND
Radial Ball, Spherical and Cylindrical Roller Bearings TAPERED ROLLER BEARINGS . . . . . . . . . . . . . . . . . . . . . . . . . E59
Inner Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E23
LIFE – THRUST BALL BEARINGS . . . . . . . . . . . . . . . . . . . . . . . E59
Outer Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E24
Radial Tapered Roller Bearings . . . . . . . . . . . . . . . . . . . . . . E25 LUBRICATION
Thrust Cylindrical Roller Bearings . . . . . . . . . . . . . . . . . . . E26 Characteristics and Operating Environments . . . . . . . . . . E61
Thrust Tapered Roller Bearings . . . . . . . . . . . . . . . . . . . . . . E26 Lubrication Grease Temperature Ranges . . . . . . . . . E61 - E62
Selection Guidelines – Radial Ball and Cylindrical Roller . . . E29 LIMITING SPEEDS
Selection Guidelines – Spherical Roller (shaft) . . . . . . . . . E30 Radial Ball and Roller Bearings . . . . . . . . . . . . . . . . . . . . . . E65
Selection Guidelines – Spherical Roller (housing) . . . . . . . E31
Shaft Dia. Tols. – Radial Ball, Spherical &
PDN Speed Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E66
MATERIALS
5
Cylindrical Roller . . . . . . . . . . . . . . . . . . . . . . . . . . . E32-E35
Temperature Ranges, Resistance
Housing Dia. Tols. – Radial Ball, Spherical &
to Corrosion and Other Environments . . . . . . . . . . . . . . . . E67
Cylindrical Roller . . . . . . . . . . . . . . . . . . . . . . . . . . . E36-E39
Operating Temperature for Bearing
Shaft Fits – Radial Ball (ABEC 1,3) . . . . . . . . . . . . . . . . E40-E41
Component Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E68
Shaft Fits – Radial Ball (7000WN) . . . . . . . . . . . . . . . . . . . . E-42 2
nd Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E69
Housing Fits – Radial Ball (ABEC 1,3) . . . . . . . . . . . . . . E43-E44
Selection Guidelines – Radial Tapered Roller . . . . . . . . . . E45
Shaft and Housing Dia. Tols. – Radial Tapered Roller . . . . E46
Shaft and Housing Dia. Tols. –
Thrust Ball/Thrust Spherical Roller . . . . . . . . . . . . . . . . E47
Shaft and Housing Dia. Tols. – Thrust Cylindrical Roller . . E48
Shaft and Housing Dia. Tols. – Thrust Tapered Roller . . . . E49
E3
INTRODUCTION
For over 80 years, Timken has been a leader in the advancement of This engineering section is not intended to be a totally comprehen-
bearing technology to its present level of sophistication and precision. sive treatise but does serve as a useful guideline in bearing selection.
Expert craftsmen, well equipped production facilities and continuing Where more complex bearing applications are involved, Timken
research and development programs insure that our products are Engineering should be consulted. The following topics are covered
synonymous with quality and reliability. Today, our plants manufacture within this section:
thousands of bearing types and sizes to handle a wide range of • Bearing Types
application requirements. • Cages
Anti-friction bearings possess capabilities involving broad ranges • Internal clearances
of speed and many combinations of radial and thrust loads. Other • Tolerances
important environmental conditions, such as low and high temperature, • Shaft and housing fits and shoulders
dust and dirt, moisture, and unusual mounting conditions affect bearing • Load ratings and life calculations
operation. • Lubrication
• Materials
• Limiting speeds
• Duplex bearings and preloading
For aircraft control bearing engineering data refer to pages 120 - 127.
Warning: A bearing/component should not be put into service if its shelf life has been
exceeded. Failure to adhere to this warning, or to follow the instructions on storage
can result in equipment failure, creating a risk of serious bodily harm.
E4
Bearing Types
RADIAL BALL BEARINGS
The basic types of Timken Fafnir ball bearings are shown here. They are
the non-filling slot or Conrad type, which is identified by the suffix K and
the filling slot designated by the suffix W.
The non-filling slot or Conrad bearing has uninterrupted raceway
shoulders and is capable of supporting radial, thrust, or combined loads.
The filling slot type, which is assembled with more balls than a K type of
the same size, has a greater capacity than the K type but has limited
Suffix K Suffix W Fixed Mounting Floating Mounting
thrust capacity due to the filling slots in the raceway shoulders.
Both the K and W types can be mounted with or without locknuts and
either fixed or floating in their housings as illustrated here.
E5
Bearing Types
Felt Seals (T Type)
The felt seal consists of two metal plates fixed in the outer ring of the
bearing which enclose a felt washer. This felt washer, which is saturated
with oil before assembly in the bearing, contacts the ground outside
diameter of the inner ring to provide sealing with minimum friction drag.
Bearings with felt seals are made only in the non-filling slot type and are
available with one seal designated by the suffix T, one seal and one shield
identified by suffix TD, and two seals suffix TT. Bores and outside
diameters of these bearings are the same as standard unshielded and
shielded types but overall widths are greater. As illustrated, in the T and TD
Suffix T Suffix TD
types, the inner rings are offset slightly on the opposite side of the seal to
permit clearance when the bearings are mounted in blind housings as
illustrated.
Tri-Ply Seals
Tri-Ply, shroud seal ball bearings are designed for bearing applications
involving exceptionally severe contamination or abrasion environments.
They are produced in many types and sizes, both in the radial and wide
inner ring designs.
Each Tri-Ply seal consists of a triple lip nitrile seal molded to a heavy
metal shroud cap. All three seal lips have heavy flare-out contact with
E6
Bearing Types
Tri-Ply Seals (continued)
the inner ring outside diameter and provides exceptionally effective
protection against the loss of lubricant and the entrance of wet or
abrasive contaminants. The shroud cap, which nests closely with the
outside seal lip helps protect the rubber seal members from wrap and
abrasion.
A feature of these bearings is the balanced design consisting of deep
raceways, large ball size, and extra wide or heavy inner rings. The use of
Tri-Ply bearings simplifies housing designs, and their extra inner ring
width provides greater support on the shaft. These bearings are widely
used on conveyors and farm machinery such as disc harrows, hillers,
tomato harvesters, cotton harvesters, etc. Tri-Ply Seals
E7
Bearing Types
SUPERPRECISION BALL BEARINGS
Every Timken Fafnir ball bearing manufactured is made to precision toler-
ances. The standard tolerances established by the Annular Bearing Engineers
Committee (ABEC) are adhered to, and even the most liberal classification,
ABEC-1 assures a precision product by nature. Many applications in
numerous types of machinery can be satisfactorily operated with ABEC-1
tolerance bearings.
However, for applications involving high speeds, extreme accuracy and
rigidity in such equipment as high-grade machine tools, woodworking
machines, gas turbines, and sensitive precision instruments, a complete line
of Fafnir superprecision ball bearings is manufactured to ABEC-7 and ABEC-9 Typical Application For Superprecision Bearing
tolerances.
E8
Bearing Types
RADIAL SPHERICAL ROLLER BEARINGS
The principle styles of radial spherical roller bearings are offered by
Timken Torrington: CJ, YM, YMB, VCF, VCSJ, and VM.
YM bearings offer the greatest range of sizes in all series. They
combine Timken design experience with proven performance in many
industries.
All of the newer styles (CJ, YM, YMB and VCF) offer higher load
ratings for longer life. CJ and YM bearings incorporate the advanced
features of Torrington Trac-Tru™ technology. CJ bearings include a
stamped steel cage and are suitable for a broad range of general service Tapered Bore
applications. For extreme conditions of use, the YM, YMB style, with a Bearing with
machined bronze cage, should be considered. Adapter Sleeve
Assembly
The VCF- style spherical roller bearing uses a cage made of high
performance glass-fiber reinforced polyamide. The maximum continuous
operating temperature under normal working conditions is 250°F
(120°C).
All styles are available in straight or tapered bores. Tapered bore
bearings can be ordered by placing a “K” immediately after the numbers
in the bearing description (i.e., 22311KYM).
Tapered bore bearings are available with adapter sleeve assemblies
consisting of sleeve, locknut and washer. Adapter sleeve assemblies are
designated SNW (i.e., SNW117).
Torrington spherical roller bearings are available in 10 dimensional
CJ YM / YMB
series conforming to ISO and ANSI ⁄ABMA standards. A graphical
illustration is presented below.
SERIES
239 230 240 231 241 222 232 213 223 233
E9
Bearing Types
RADIAL CYLINDRICAL ROLLER BEARINGS
Standard Styles
A Timken Torrington cylindrical roller bearing consists of an inner and outer rings. Both types can support heavy loads, as well as light
outer ring, a roller retaining cage, and a complement of controlled unidirectional thrust loads up to 10% of the radial loads. The thrust load
contour cylindrical rollers. Depending on the type of bearing, either the is transmitted between the diagonally opposed rib faces in a sliding
inner or the outer ring has two roller guiding ribs. The other ring is action rather than a rolling one. Thus, when limiting thrust conditions are
separable from the assembly, has one rib or none. The ring with two ribs approached, lubrication can become critical. Timken Engineering should
locates axially the position of the roller assembly. The ground diameters be consulted for approval of such applications. When thrust loads are
of these ribs may be used to support the roller cage. One of the ribs may very light, these bearings may be used in an opposed mounting to locate
be used to carry light thrust loads when an opposing rib is provided in the shaft. In such cases, shaft end play should be adjusted at time of
the mating ring. assembly.
The decision as to which ring should be double ribbed is normally Types RT and RIT have double ribbed outer and single ribbed inner
determined by considerations of assembly and mounting procedures in ring with a loose rib which allows the bearing to provide axial location in
the application. both directions. Types RP and RIP have a double ribbed inner and a
Types RU and RIU have double ribbed outer and straight inner rings. single ribbed outer with a loose rib.
Types RN and RIN have double ribbed inner and straight outer rings. Types RT and RP (as well as RIT and RIP) can carry heavy radial
The use of either type at one position on a shaft is ideal for accommo- loads and light thrust loads in both directions. Factors governing the
dating nominal expansion or contraction. The relative axial displacement thrust capacity are the same as for types RF and RJ bearings.
of one ring to the other occurs with minimum friction while the bearing is A type RT or RP bearing may be used in conjunction with a type RN
rotating. These bearings may be used in two positions for shaft support if or RU bearing for applications where axial shaft expansion is anticipated.
other means of axial location are provided. In such cases the fixed bearing is usually placed nearest the drive end of
Types RJ and RIJ have double ribbed outer and single ribbed inner the shaft to minimize alignment variations in the drive. shaft end play (or
rings. Types RF and RIF have double ribbed inner and single ribbed float) is determined by the axial clearance in the bearing.
This series features enhanced radial load rating due to its internal from vacuum treated high carbon chromium alloy steel. The inner rings
design proportions. In this series, the outer ring is double ribbed and the are made from a vacuum treated carburized grade nickel alloy steel and
inner ring is full width with a cylindrical O.D. The bearing can also be are deep case carburized to Rc 58 to accommodate the hoop stresses
furnished without an inner ring for applications where radial space is caused by heavy press fits frequently encountered.
limited. When so used, the shaft journal must be hardened to Rc 58 The Controlled Contour rollers are made from a through hardening
minimum, and the surface finished to 15 RMS maximum. grade vacuum treated steel . Proper roller guidance is assured by
The bearing is usually furnished with a rugged stamped steel cage integral ribs and roller end clearance control.
(“S” designation ) which is land riding on the outer ring ribs. The cage The standard bearing is furnished with internal diameter clearances
features depressed bars which not only space rollers evenly, but, retain designated as R6 which are tabulated on page 337. Other internal
them as a complete assembly with the outer ring. Cages of machined clearances can be supplied upon request.
bronze (“M” designation ) are available for applications where reversing
loads or high speeds might indicate their need. Outer rings are made
E10
Bearing Types
RADIAL TAPERED ROLLER BEARINGS
Single Row Tapered Roller Bearings
Two types (TS and TSS) of single row tapered roller bearings are
offered. Each has a cup, and a cone with a cage and roller assembly.
Type TS serves as the basic design for the others.
Since a single row tapered roller bearing supports thrust loads from
only one direction, the preferred mounting is in opposed pairs. The
proper internal clearance for the two bearings may be obtained by axial
adjustment at the time of assembly.
The type TSS bearings are similar to type TS, but have a steeper TS TSS
angle of contact. These bearings are recommended for applications
where thrust loads are predominant.
E11
Bearing Types
THRUST BEARINGS
Standard types of thrust bearings manufactured by Timken Torrington Type TVB – Grooved race thrust ball bearing
are included in this section. Each type is designed to take thrust loads, Type TVL – Angular contact thrust ball bearing
but three types (TVL, DTVL and TSR) accommodate radial loads as Type DTVL – Two direction angular contact thrust ball bearing
well. All types reflect advanced design concepts, with large rolling Type TP – Thrust cylindrical roller bearing
elements for maximum capacity. In roller thrust bearings, Controlled Type TPS – Self-aligning thrust cylindrical roller bearing
Contour rollers are used to insure uniform, full length contact between Type TTHD – Thrust tapered roller bearing
rollers and raceways with resultant high capacity. Thrust bearings should Type TSR – Thrust spherical roller bearing
operate under continuous load for satisfactory performance. Type TTVF – V-Flat thrust tapered roller bearing
Type TTVS – Self-aligning V-Flat thrust tapered roller bearing
Thrust Ball Bearings clearance to allow the bearing to assume its proper operating position. If
Thrust ball bearings are used for lighter loads and higher speeds than combined loads exist, the outer ring must be radially located in the
thrust roller bearings. housing.
The type TVB ball thrust bearing is separable, and consists of two The type TVL bearing should always be operated under thrust load.
hardened and ground steel washers with grooved raceways, and a cage Normally, this presents no problem as the bearing is usually applied on
which separates and retains precision ground and lapped balls. The vertical shafts in oil field rotary tables and machine tool indexing tables.
standard cage material is bronze, but this may be varied according to the If constant thrust load is not present it should be imposed by springs or
requirements of the application. Torrington Standard Tolerances for type other built-in devises.
TVB bearings are equivalent to ABEC-1 where applicable but higher Low friction, cool running, and quiet operation are advantages of this
grades of precision are available. type TVL bearing, which may be operated at relatively high speeds. The
The type TVB bearing provides axial rigidity in one direction, and its bearing is also less sensitive to misalignment than other types of rigid
use to support radial loads is not recommended. It is very easily mounted. thrust bearings.
Usually the rotating washer is shaft mounted. The stationary washer DTVL is similar in design to TVL except the DTVL has an additional
should be housed with sufficient O.D. clearance to allow the bearing to washer and ball complement permitting it to carry moderate thrust in one
assume its proper operating position. In most sizes both washers have the direction and light thrust in the other direction.
same bore and O.D. The housing must be designed to clear the O.D. of
the rotating washer, and it is necessary to step the shaft to clear the bore
of the stationary washer.
Type TVL is a separable angular contact ball bearing primarily
designed for unidirectional thrust loads. The angular contact design,
however, will accommodate combined radial and thrust loads since the
loads are transmitted angularly through the balls. TVB TVL
The bearing has two hardened and ground steel rings with ball
grooves and a one-piece bronze cage which spaces the ball complement.
Although not strictly an annular ball bearing, the larger ring is still called
the outer ring, and the smaller the inner ring. Torrington Standard
Tolerances for type TVL bearings are equivalent to ABEC-1 where
applicable, but higher grades of precision are available.
Usually the inner ring is the rotating member and is shaft mounted.
The outer ring is normally stationary and should be mounted with O.D. DTVL
E12
Bearing Types
THRUST ROLLER BEARINGS (continued)
Type TPS bearing is the same as type TP bearing except one washer
is spherically ground to seat against an aligning washer, thus making the
bearing adaptable to initial misalignment. Its use is not recommended
for operating conditions where alignment is continuously changing
(dynamic misalignment).
The type TTHD thrust tapered roller bearing has an identical pair of TPS
hardened and ground steel washers with conical raceways, and a
complement of Controlled Contour tapered rollers equally spaced by a
cage.
In the design of type TTHD, the raceways of both washers and the
tapered rollers have a common vertex at the bearing center. This
assures true rolling motion. The large end of each tapered roller is
spherically ground to match the concave faces of both washer ribs. The
pressure exerted under load by the roller ends at the rib surfaces
accurately guides the rollers. The center of the large end of each roller is
counterbored to improve lubrication at the guiding rib surfaces.
TTHD bearings are well suited for applications such as crane hooks,
TTHD
where extremely high thrust loads and heavy shock must be resisted
and some measure of radial location obtained. For very low speed,
extremely heavily loaded applications, these bearings are supplied with
a full complement of rollers for maximum capacity, and are identified in
the table of dimensions by the suffix 278 of the bearing number. For
application approval of the full complement type TTHD bearing, consult
our engineering department.
TTVS self-aligning V-Flat bearing employs the same basic roller and
raceway design, except that the lower assembly is composed of two
washers with the contacting faces spherically ground to permit self-
alignment under conditions of initial misalignment. TTVS bearings TTVS
should not be used, however, if dynamic misalignment (changing
under load) is expected. 5
The TSR thrust spherical roller bearing design achieves a high thrust
capacity with low friction and continuous roller alignment. The bearings
can accommodate pure thrust loads as well as combined radial and
thrust loads. Higher speeds are obtainable with this design than with any
of the other thrust roller bearings. Typical applications are air regenera-
tors, centrifugal pumps, and deep well pumps. Maximum axial misalign-
ment between inner and outer ring is ±2.5°.
TSR
E13
Cages
Cages (sometimes referred to as rolling element separators or retainers)
perform an important function in the proper operation of rolling bearings.
They serve to maintain uniform rolling element spacing in the races of
the inner and outer rings of the bearings as the rolling elements pass
into and out of the load zones. Cage types in several materials and
configurations have been developed by Torrington to meet various
service requirements. Temperature limitations are described later in this
section.
Some of the materials from which cages are made include pressed
steel, pressed bronze, machined bronze, machined steel and composi-
tions of various synthetic materials.
Molded Cages
Molded cages are either ball piloted or land piloted and are available in
the following types:
Nylon (PRB)
One-piece molded snap-in 6/6 nylon cages are specially processed to
provide:
•Toughness at moderately high and low temperatures
•Resistance to abrasion
•Resistance to organic solvents, oils and grease
•Natural lubricity
•Long term service at temperatures up to +250°F (+121°C)
•Dimensional stability
These cages offer superior performance in applications involving
misalignment due to their greater flexibility.
PRB molded nylon cages provide uniformity of ball pocket clear-
ances for consistent operation. They are suitable for temperatures up to
+250°F (+121°C) continuous operation and can tolerate +300°F
(+149°C) for short periods.
These cages are available in conrad (K) bearings and are standard
for the more popular wide inner ring bearing series.
E14
Cages
Molded Cages (continued)
Reinforced Nylon (PRC)
Molded 6/6 nylon reinforced with 30% (by weight) glass fibers. This
material is used primarily for one-piece ring piloted cages used in
precision grades of angular contact bearings.
PRC cages offer outstanding strength and long term temperature
resistance. Molded to very close tolerances and uniformity, combined
with light weight design, they permit higher speeds and reduced noise.
They are suitable for temperatures up to +300°F (149°C).
PRC cages are usually the one piece outer piloted “L” type design,
but are also available in one piece ball controlled designs.
Iron Silicon Bronze Cage (SMBR) and Machined Steel Cage (MSR)
The SMBR and MSR cages are ring piloted. The advantages of these
cages are high strength even at elevated temperatures ( see chart on
page E68) as well as high-speed capability due to the ring piloted
construction. In many cases these cages are silver plated for use in
applications requiring high reliability.
They are available in both ball and roller bearings.
5
Composition Cages (CR)
Composition cages combine light weight, precision and oil-absorbing
features which are particularly desirable for use on high speed
applications. This (CR) cage, is a ring piloted type and is particularly
associated with the outer-ring piloted , extraprecision WN series
bearings.
Special Cages
For certain very high contact angle, light section aircraft bearings,
molded nylon “snake” cages are employed. Cages are also made with
high temperature materials (see page E68) in the various configurations
described above.
For availability of special cages please contact Timken Engineering.
Continued on the next page.
E15
Cages
SPHERICAL ROLLING BEARINGS
Bronze Cages
YM Bearing cages are one-piece design centrifugally cast and precision
machined. Its rugged construction provides an advantage in more
severe applications. Due to its design this cage permits YM bearings to
incorporate greater load carrying capabilities.
The open end design permits lubricant to reach all surfaces easily
assuring ample lubrication and a cooler running bearing.
Stamped Steel Cages (J)
These cages are used in CJ bearings and are designed to permit extra
load carrying capabilities in the bearing. Two independent cages, one for
each row of rollers, are assembled in an individual bearing.
Pin Type Cages
Large diameter spherical roller bearings can be supplied with these YM Cage YMB Cage
cages. The design of pin type cages permits an increased roller
complement thus giving the bearing enhanced load carrying ability.
Consult Timken Engineering for recommendations on the application of
this cage.
E16
Internal Clearance
Radial Ball Bearings Radial Internal Clearance
In the manufacture of ball bearings, it is standard practice to The radial internal clearance of a radial contact ball bearing can be
assemble rings and balls with a specified internal clearance. This defined as the average outer ring raceway diameter minus the
characteristic is necessary to absorb the effect of press fitting the average inner ring raceway diameter minus twice the ball diameter.
bearing rings at mounting. Radial internal clearance can be measured mechanically by
Internal clearance is sometimes utilized to compensate for moving the outer ring, horizontally as pictured in Figure 1. The total
thermal expansion of bearings, shafts and housings, or to provide a movement of the outer ring when the balls are properly seated in the
contact angle in the bearing after mounting. raceways, determines the radial internal clearance. Several readings
Internal clearance can be measured either by gaging should be taken using different circumferential orientations of the
radially or axially. rings in order to get a comprehensive average reading.
Radial measurement is accepted as the more significant
characteristic because it is more directly related to shaft and housing
fits. It also is the method prescribed by the American Bearing
Manufacturers Association (ABMA). A B
Figure 1
LIMITS FOR RADIAL INTERNAL CLEARANCE OF SINGLE ROW, RADIAL CONTACT BALL BEARINGS UNDER NO LOAD
(Applies to Bearings of ABEC-1, ABEC-3, ABEC-5, ABEC-7, and ABEC-9 Tolerances)
Tolerance Limits in ten-thousandths inches (.0001") and micrometers (µm)
Fafnir Prefix (ABMA designation) H (C2) R (C0) P (C3) J (C4) JJ (C5)
Basic Bore Acceptance Limits Acceptance Limits Acceptance Limits Acceptance Limits Acceptance Limits
Diameter
MM
Over Incl. low high low high low high low high low high
2.5 10 0 3 1 5 3 9 6 11 8 15
0 7 2 13 8 23 14 29 20 37
10 18 0 3.5 1 7 4 10 7 13 10 18
0 9 3 18 11 25 18 33 25 45
18 24 0 4 2 8 5 11 8 14 11 19
0 10 5 20 13 28 20 36 28 48
24 30 0.5 4.5 2 8 5 11 9 16 12 21
1 11 5 20 13 28 23 41 30 53
30 40 0.5 4.5 2 8 6 13 11 18 16 25
1 11 6 20 15 33 28 46 40 64
: Standard fits for Timken Fafnir radial ball bearings. P(C3) for bearing O.D. greater than 52 mm. Continued on the next page.
E17
Internal Clearances
Limits for radial internal clearance of single row, radial contact ball bearings under no load
(Applies to Bearings of ABEC-1, ABEC-3, ABEC-5, ABEC-7, and ABEC-9 Tolerances)
Tolerance Limits in ten-thousandths inches (.0001") and micrometers (µm)
Timken Torrington radial clearance designations correlate with ABMA When the inner and outer ring raceway curvatures are accurately known,
symbols as follows: the free end play can readily be calculated from the values of no load
radial clearance by the following formula:
Fafnir
Bearing
Number ABMA
E = √4dRD(KO + K i - 1) - RD2 or ≅ √ 4dRD(KO + Ki - 1)
Prefix Symbol Description
P.D. Nc
cos α =
d ( 1- .5Ni )
The accuracy of this method of measurement depends greatly upon
the care taken in set-up. Balanced weight for thrust loading, vertical
truing, slow turning, many turns, minimum lubricant of low viscosity and
prerotation are all essential for instance. The races should not be radially
Figure 2 restrained during the contact angle measurement.
E18
Internal Clearances
RADIAL SPHERICAL ROLLER BEARINGS
Radial Internal Clearance (RIC) is the radial play within a bearing. Timken Several factors influence RIC reduction. Inner rings pressed into
Torrington bearing's RIC allow a tight fit, with sufficient internal clearance solid steel shafts expand approximately 80% of the interference fit.
after installation for normal operating conditions. Outer rings pressed into steel or cast iron housings reduce RIC by
Spherical Roller Bearings with tapered bore (K) require a slightly about 60%, of the interference fit. For RIC reduction on hollow shafts
greater interference fit on the shaft than would a cylindrical bore bearing. or non-steel materials consult your local Timken sales engineer.
The effect of this greater interference fit is a reduction of RIC. For tapered Torrington bearings are supplied with NORMAL RIC, unless other-
bore bearings, it is critical to select the RIC that allows for this reduction. wise specified. The desired RIC code must be added to the bearing
For example, bearing number 22328K C3 (140 mm bore with C3 number, FOLLOWING ALL OTHER SUFFIXES.
clearance) is to be mounted on a tapered shaft. By feeler gauging, RIC Min./max. values for each RIC are shown in the two adjacent
is found to be 0.007" (0.178mm). The chart indicates that the proper fit will columns directly beneath the selected RIC. Each single column
be obtained when RIC is reduced by 0.0025" to 0.0035" (0.064 to 0.089 represents a boundary between adjacent RIC’s. For example, the
mm). Clearance after mounting is computed: 0.007" - 0.003" = 0.004" minimum values shown for C5 are also the maximum values for C4;
(0.178 - 0.076 = 0.102mm). The locknut should be tightened until RIC minimum values for C4 are also the maximum values for C3; etc.
reaches 0.004" (0.102mm).
24 30 0.0006 0.0010 0.0016 0.0022 0.0030 0.0037 0.0008 0.0012 0.0016 0.0022 0.0030 0.0037 0.0006 0.0008 0.0006
0.015 0.025 0.040 0.055 0.075 0.095 0.020 0.030 0.040 0.055 0.075 0.095 0.015 0.020 0.015
30 40 0.0006 0.0012 0.0018 0.0024 0.0031 0.0039 0.0010 0.0014 0.0020 0.0026 0.0033 0.0041 0.0008 0.0010 0.0006
0.015 0.030 0.045 0.060 0.080 1.000 0.025 0.035 0.050 0.065 0.085 0.105 0.020 0.025 0.015
40 50 0.0008 0.0014 0.0022 0.0030 0.0039 0.0049 0.0012 0.0018 0.0024 0.0031 0.0039 0.0051 0.0010 0.0012 0.0008
0.020 0.035 0.055 0.075 0.100 0.125 0.030 0.045 0.060 0.080 0.100 0.130 0.025 0.030 0.020
50 65 0.0008 0.0016 0.0026 0.0035 0.0047 0.0059 0.0016 0.0022 0.0030 0.0037 0.0047 0.0063 0.0012 0.0015 0.0010
0.020 0.040 0.065 0.090 0.120 0.150 0.040 0.055 0.075 0.095 0.120 0.160 0.030 0.038 0.025
65 80 0.0012 0.0020 0.0031 0.0043 0.0057 0.0071 0.0020 0.0028 0.0037 0.0047 0.0059 0.0079 0.0015 0.0020 0.0010
0.030 0.050 0.080 0.110 0.145 0.180 0.050 0.070 0.095 0.120 0.150 0.200 0.038 0.051 0.025
80 100 0.0014 0.0024 0.0039 0.0053 0.0071 0.0089 0.0022 0.0030 0.0043 0.0055 0.0071 0.0091 0.0018 0.0025 0.0014
0.035 0.060 0.100 0.135 0.180 0.225 0.055 0.080 0.110 0.140 0.180 0.230 0.046 0.064 0.036
100 120 0.0016 0.0030 0.0047 0.0063 0.0083 0.0102 0.0026 0.0039 0.0053 0.0067 0.0087 0.0110 0.0020 0.0028 0.0020
0.040 0.075 0.120 0.160 0.210 0.260 0.065 0.100 0.135 0.170 0.220 0.280 0.051 0.071 0.051
120 140 0.0020 0.0037 0.0057 0.0075 0.0094 0.0118 0.0031 0.0047 0.0063 0.0079 0.0102 0.0130 0.0025 0.0035 0.0022
0.050 0.095 0.145 0.190 0.240 0.300 0.080 0.120 0.160 0.200 0.260 0.330 0.064 0.089 0.056
140 160 0.0024 0.0043 0.0067 0.0087 0.0110 0.0138 0.0035 0.0051 0.0071 0.0091 0.0118 0.0150 0.0030 0.0040 0.0022
0.060 0.110 0.170 0.220 0.280 0.350 0.090 0.130 0.180 0.230 0.300 0.380 0.076 0.102 0.056
200 225 0.0031 0.0055 0.0087 0.0114 0.0150 0.0185 0.0047 0.0071 0.0098 0.0126 0.0161 0.0205 0.0040 0.0055 0.0030
0.080 0.140 0.220 0.290 0.380 0.470 0.120 0.180 0.250 0.320 0.410 0.520 0.102 0.140 0.076
225 250 0.0035 0.0059 0.0094 0.0126 0.0165 0.0205 0.0055 0.0079 0.0106 0.0138 0.0177 0.0224 0.0045 0.0060 0.0035
0.090 0.150 0.240 0.320 0.420 0.520 0.140 0.200 0.270 0.350 0.450 0.570 0.114 0.152 0.089
250 280 0.0039 0.0067 0.0102 0.0138 0.0181 0.0224 0.0059 0.0087 0.0118 0.0154 0.0193 0.0244 0.0045 0.0065 0.0040
0.100 0.170 0.260 0.350 0.460 0.570 0.150 0.220 0.300 0.390 0.490 0.620 0.114 0.165 0.102
280 315 0.0043 0.0075 0.0110 0.0146 0.0197 0.0248 0.0067 0.0094 0.0130 0.0169 0.0213 0.0268 0.0050 0.0070 0.0040
0.110 0.190 0.280 0.370 0.500 0.630 0.170 0.240 0.330 0.430 0.540 0.680 0.127 0.178 0.102
315 355 0.0047 0.0079 0.0122 0.0161 0.0217 0.0272 0.0075 0.0106 0.0142 0.0185 0.0232 0.0291 0.0055 0.0075 0.0045
0.120 0.200 0.310 0.410 0.550 0.690 0.190 0.270 0.360 0.470 0.590 0.740 0.140 0.190 0.114
355 400 0.0051 0.0087 0.0134 0.0177 0.0236 0.0295 0.0083 0.0118 0.0157 0.0205 0.0256 0.0323 0.0060 0.0080 0.0050
0.130 0.220 0.340 0.450 0.600 0.750 0.210 0.300 0.400 0.520 0.650 0.820 0.152 0.203 0.127
(1)
For bearings with normal initial clearance Continued on the next page
E19
Internal Clearances
Radial Spherical Roller Bearings (continued)
Min./Max. values for each RIC are shown in the two adjacent columns
directly beneath the selected RIC. Each single column represents a
boundary between adjacent RIC’s. For example, the minimum values
shown for C5 are also the maximum values for C4; minimum values for
C4 are also the maimum values for C3; etc.
C2 C3 C5 C2 C3 C5
mm min. max. min. max. min. max. min. max. min. max. min. max. min. max. min.
inch inch inch inch inch inch inch inch inch inch inch inch inch inch inch
over incl. mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
400 450 0.0055 0.0094 0.0146 0.0197 0.0260 0.0323 0.0091 0.0130 0.0173 0.0224 0.0283 0.0358 0.0065 0.0085 0.0060
0.140 0.240 0.370 0.500 0.660 0.820 0.230 0.330 0.440 0.570 0.720 0.910 0.165 0.216 0.152
450 500 0.0055 0.0102 0.0161 0.0217 0.0283 0.0354 0.0102 0.0146 0.0193 0.0248 0.0311 0.0394 0.0070 0.0090 0.0065
0.140 0.260 0.410 0.550 0.720 0.900 0.260 0.370 0.490 0.630 0.790 1.000 0.178 0.229 0.165
500 560 0.0059 0.0110 0.0173 0.0236 0.0307 0.0394 0.0114 0.0161 0.0213 0.0268 0.0343 0.0433 0.0080 0.0100 0.0070
0.150 0.280 0.440 0.600 0.780 1.000 0.290 0.410 0.540 0.680 0.870 1.100 0.203 0.254 0.178
560 630 0.0067 0.0122 0.0189 0.0256 0.0335 0.0433 0.0126 0.0181 0.0236 0.0299 0.0386 0.0484 0.0090 0.0110 0.0080
0.170 0.310 0.480 0.650 0.850 1.100 0.320 0.460 0.600 0.760 0.980 1.230 0.229 0.279 0.203
630 710 0.0075 0.0138 0.0209 0.0276 0.0362 0.0469 0.0138 0.0201 0.0264 0.0335 0.0429 0.0535 0.0100 0.0120 0.0080
0.190 0.350 0.530 0.700 0.920 1.190 0.350 0.510 0.670 0.850 1.090 1.360 0.254 0.305 0.203
710 800 0.0083 0.0154 0.0228 0.0303 0.0398 0.0512 0.0154 0.0224 0.0295 0.0378 0.0480 0.0591 0.0110 0.0140 0.0090
0.210 0.390 0.580 0.770 1.010 1.300 0.390 0.570 0.750 0.960 1.220 1.500 0.279 0.356 0.229
800 900 0.0091 0.0169 0.0256 0.0339 0.0441 0.0567 0.0173 0.0252 0.0331 0.0421 0.0539 0.0665 0.0120 0.0150 0.0100
0.230 0.430 0.650 0.860 1.120 1.440 0.440 0.640 0.840 1.070 1.370 1.690 0.305 0.381 0.252
900 1000 0.0102 0.0189 0.0280 0.0366 0.0480 0.0618 0.0193 0.0280 0.0366 0.0469 0.0598 0.0732 0.0140 0.0170 0.0110
0.260 0.480 0.710 0.930 1.220 1.57 0.490 0.710 0.930 1.190 1.520 1.860 0.356 0.432 0.279
(1)For bearings with normal initial clearance
E20
Internal Clearances
Radial Cylindrical Roller Bearings
Min./Max. values for each RIC are shown in the two adjacent
columns directly beneath the selected RIC. Each single column
represents a boundary between adjacent RIC’s. For example, the
minimum values shown for R5 are also the maximum values for R4;
minimum values for R4 are also the maimum values for R3; etc. The
desired RIC code (R1, R2, etc.) must be added to the bearing
number, FOLLOWING ALL OTHER SUFFIXES.
R1 R3 R5 R1 R3 R5
Over Incl. min. max. min. max. min. max. Over Incl. min. max. min. max. min. max.
in. in. in. in. in in. in. in. in. in. in. in. in in. in. in.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
3.1496 3.9370 0.0005 0.0016 0.0032 0.0051 0.0077 0.0107 11.8110 13.7795 0.0032 0.0050 0.0078 0.0110 0.0148 0.0190
80 100 0.013 0.041 0.081 0.130 0.196 0.272 300 350 0.081 0.127 0.198 0.279 0.376 0.483
3.9370 4.7244 0.0005 0.0018 0.0036 0.0060 0.0089 0.0122 13.7795 15.7480 0.0042 0.0065 0.0093 0.0125 0.0163 0.0205
100 120 0.013 0.046 0.091 0.152 0.226 0.310 350 400 0.107 0.165 0.236 0.318 0.414 0.521
4.7244 5.5118 0.0009 0.0022 0.0041 0.0067 0.0101 0.0139 15.7480 17.7165 0.0055 0.0080 0.0110 0.0142 0.0180 0.0222
120 140 0.023 0.056 0.104 0.170 0.256 0.353 400 450 0.14 0.203 0.279 0.361 0.457 0.564
5.5118 6.2992 0.0010 0.0026 0.0049 0.0077 0.0112 0.0151 17.7165 19.6850 0.0060 0.0085 0.0115 0.0150 0.0200 0.0254
140 160 0.025 0.066 0.124 0.196 0.284 0.384 450 500 0.152 0.216 0.292 0.381 0.508 0.645
6.2992 7.0866 0.0011 0.0027 0.0052 0.0082 0.0118 0.0158 19.6850 22.0472 0.0065 0.0090 0.0120 0.0160 0.0210 0.0264
160 180 0.028 0.069 0.132 0.208 0.300 0.401 500 560 0.165 0.229 0.305 0.406 0.533 0.671
7.0866 7.8740 0.0014 0.0032 0.0060 0.0092 0.0130 0.0172 22.0472 24.8031 0.0070 0.0100 0.0140 0.0190 0.0240 0.0294
180 200 0.036 0.081 0.152 0.234 0.330 0.437 560 630 0.178 0.254 0.356 0.483 0.610 0.747
7.8740 8.6614 0.0016 0.0034 0.0062 0.0094 0.0132 0.0174 24.8031 27.9528 0.0075 0.0110 0.0150 0.0200 0.0250 0.0304
200 220 0.041 0.086 0.157 0.239 0.335 0.4421 630 710 0.190 0.279 0.381 0.508 0.635 0.772
8.6614 10.2362 0.0022 0.0040 0.0068 0.0100 0.0138 0.0180 27.9528 31.4961 0.0085 0.0130 0.0180 0.2300 0.0280 0.0334
220 260 0.056 0.102 0.173 0.254 0.351 0.455 710 800 0.216 0.330 0.457 0.584 0.711 0.848
E21
Internal Clearances
RADIAL TAPERED ROLLER BEARINGS - TWO ROW
In two row tapered roller bearings, Internal Clearance is usually defined B
as Lateral Clearance (LC) or end play, which is related to Radial Internal A
Clearance (RIC) by the formula:
LC = RIC x K RIC
RIC
0.39
K being a thrust factor which is different for every bearing and is included
in the table of dimensions.
LC is determined by the relative axial position of cup and cone, and is
a function of spacer width in the two element member (cup or cone). In Lc = B -A
the illustration, the cups shown in black are positioned for zero RIC, Lc Lc
allowing no end play. The cups shown in green provide lateral clearance
2 2
equal to (B-A).
The desired LC must be specified by adding designation codes G1,
G2, etc. to the bearing number, FOLLOWING ALL OTHER SUFFIXES.
E22
Tolerances
ABMA ⁄ ISO Symbols - Inner Ring
RADIAL BALL, SPHERICAL AND CYLINDRICAL ∆
dmp Single plane mean bore diameter deviation from basic bore diameter, i.e. bore
ROLLER BEARINGS tolerance for a basically tapered bore, ∆dmp refers only to the theoretical small bore
Depending upon requirements, various degrees of bearing accuracy end of the bore
may be required. Kia Radial runout of assembled bearing inner ring, i.e., radial runout of raceway
VBs Inner ring width variation, i.e. parallelism
Amoung the tolerance classes, ABEC-1 applies to ball bearings for
Sd Inner ring reference face runout with bore, i.e., squareness - bore to face
normal useage. The other classes ABEC-3, 5, 7, 9 apply to ball bearings
Sia Axial runout of assembled bearing inner ring, i.e. lateral (axial) runout of raceway
of increased precision as required. ∆
Bs Single inner ring width deviation from basic, i.e., width tolerance
RBEC-1 applies to roller bearings for normal usage. RBEC-3 and 5
apply to roller bearings of increased precision as required. ABMA ⁄ ISO Symbols - Outer Ring
∆
Dmp Single plane mean outside diameter deviation from basic outside diameter, i.e. O.D.
tolerance
Kea Radial runout of assembled bearing outer ring, i.e., radial runout of raceway
VCs Outer ring width variation, i.e. parallelism
SD Outside cylindrical surface runout with outer ring reference face, i.e., squareness -
O.D. to face
Sea Axial runout of assembled bearing outer ring, i.e. lateral (axial) runout of raceway
∆
Cs Outer ring width deviation from basic, i.e., width tolerance
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
0 10 30-39 -3 -3 -2 -1.5 -1 6 6 2 1 0.5 4 2.5 1.5 1 0.5 3 1 0.5 3 1 0.5 -50 -15
-8 -7 -5 -4 -2.5 15 15 5 2.5 1.5 10 6 4 2.5 1.5 7 3 1.5 7 3 1.5 -120 -40
30 50 07-10 -4.5 -4 -3 -2.5 -1 8 8 2 1 0.5 6 4 2 1.5 1 3 1.5 0.5 3 1.5 1 -50 -50
-12 -10 -8 -6 -2.5 20 20 5 3 1.5 15 10 5 4 2.5 8 4 1.5 8 4 2.5 -120 -120
50 80 11-16 -6 -4.5 -3.5 -3 -1.5 10 10 2.5 1.5 0.5 8 4 2 1.5 1 3 2 0.5 3 2 1 -60 -60
-15 -12 -9 -7 -4 25 25 6 4 1.5 20 10 5 4 2.5 8 5 1.5 8 5 2.5 -150 -150
150 180 32-36 -10 -7 -5 -4 -3 12 12 3 2 1.5 12 7 3 2.5 2 4 2.5 1.5 4 3 2 -100 -100
-25 -18 -13 -10 -7 30 30 8 5 4 30 18 8 6 5 10 6 4 10 7 5 -250 -250
180 250 38-50 -12 -8.5 -6 -4.5 -3 12 12 4 2.5 2 16 8 4 3 2 4.5 3 2 5 3 2 -120 -120
-30 -22 -15 -12 -8 30 30 10 6 5 40 20 10 8 5 11 7 5 13 8 5 -300 -300
E23
over incl. 1 3 5 7 9 1, 3 5 7 9 1 3 5 7 9 5 7 9 5 7 9
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
0 18 30-39 -3 -3 -2 -1.5 -1 6 2 1 0.5 6 4 2 1 0.5 3 2 0.5 3 1.5 0.5
-8 -7 -5 -4 -2.5 15 5 2.5 1.5 15 8 5 3 1.5 8 5 1.5 8 4 1.5
9100-9101
18 30 200 -3.5 -3 -2.5 -2 -1.5 8 2 1 0.5 6 4 2.5 1.5 1 3 2 1 3 1.5 0.5
9300-9303 -9 -8 -6 -5 -4 20 5 2.5 1.5 15 9 6 4 2.5 8 5 2.5 8 4 1.5
9304-9306
30 50 9102-9105 -4.5 -3.5 -3 -2.5 -1.5 8 2 1 0.5 8 4 3 2 1 3 2 1 3 1.5 0.5
200-204 -11 -9 -7 -6 -4 20 5 2.5 1.5 20 10 7 5 2.5 8 5 2.5 8 4 1.5
300-303
9307-9312
50 80 9106-9110 -5 -4.5 -3.5 -3 -1.5 10 2.5 1 0.5 10 5 3 2 1.5 4 2 1.5 3 1.5 0.5
205-208 -13 -11 -9 -7 -4 25 6 3 1.5 25 13 8 5 4 10 5 4 8 4 1.5
304-307
9313-9317
80 120 9111-9115 -6 -5 -4 -3 -2 10 3 1.5 1 14 7 4 2.5 2 4.5 2.5 2 3.5 2 1
209-213 -15 -13 -10 -8 -5 25 8 4 2.5 35 18 10 6 5 11 6 5 9 5 2.5
308-311
9318-9322
120 150 9116-9120 -7 -6 -4.5 -3.5 -2 12 3 2 1 16 8 4.5 3 2 5 3 2 4 2 1
214-217 -18 -15 -11 -9 -5 30 8 5 2.5 40 20 11 7 5 13 7 5 10 5 2.5
312-314
9323-9326
150 180 9121-9326 -10 -7 -5 -4 -3 12 3 2 1 18 9 5 3 2 5.5 3 2 4 2 1
218-220 -25 -18 -13 -10 -7 30 8 5 2.5 45 23 13 8 5 14 8 5 10 5 2.5
315-317
9126-9132
180 250 220-228 -12 -8 -6 -4.5 -3 12 4 3 1.5 20 10 6 4 3 6 4 3 4.5 3 1.5
318-322 -30 -20 -15 -11 -8 30 10 7 4 50 25 15 10 7 15 10 7 11 7 4
9134-9140
250 315 230-234 -14 -10 -7 -5 -3 14 4.5 3 2 24 12 7 4.5 3 7 4 3 5 3 2
324-328 -35 -25 -18 -13 -8 35 11 7 5 60 30 18 11 7 18 10 7 13 8 5
9144-9152
315 400 236-244 -16 -11 -8 -6 -4 16 5 3 3 28 14 8 5 3 8 5 3 5 4 3
330-338 -40 -28 -20 -15 -10 40 13 8 7 70 35 20 13 8 20 13 8 13 10 7
9156-9164
400 500 246-256 -18 -13 -9 — — 18 6 — — 31 16 9 — — 9 — — 6 — —
340-348 -45 -33 -23 — — 45 15 — — 80 40 23 — — 23 — — 15 — —
9180
500 630 260-264 -20 -15 -11 — — 20 7 — — 39 20 10 — — 10 — — 7 — —
352-356 -50 -38 -28 — — 50 18 — — 100 50 25 — — 25 — — 18 — —
630 800 -30 -18 -14 — — — 8 — — 47 24 12 — — 12 — — 8 — —
-75 -45 -35 — — — 20 — — 120 60 30 — — 30 — — 20 — —
800 1000 -40 -24 — — — — — — — 55 30 — — — — — — — — —
-100 -60 — — — — — — — 140 75 — — — — — — — — —
1000 1250 -50 — — — — — — — — 63 — — — — — — — — — —
-125 — — — — — — — — 160 — — — — — — — — — —
The tolerances in this table are in conformance with ANSI ABMA Standard 20 - 1987.
(1)
dmin (the smallest single diameter of an O.D.) and dmax (the largest single diameter of an O.D.) may fall outside limits shown d min + dmax must be within outside diameter tabulated.
For further details see ABMA Standard 20. 2
E24
Tolerances
Radial Tapered Roller Bearings
All data on this page are in inches/millimeters.
Cone and Cup Width (Based on Cone Bore)
Radial Runout Bearing Types
Assembled
Cone Bore Cone Cup O.D. Bearing (Based TS TDI, TDO
Cup O.D. Bore on Cup O.D.) TSS TDOC
Tolerance Tolerance Tolerance Tolerance
Class 2&4 Class 3 Class 4 Class 2 Class 3 Class 4 Class 2 Class 3 Class 2 Class 4 Class 3 Class 2 Class 4 Class 3
over incl. -0 -0 -0 -0 -0 -0 -0 -0 + – + – + – + – + – + –
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
7.5000 12.0000 +0.0010 +0.0005 +0.0010 +0.0010 +0.0005 0.0020 0.0015 0.0003 0.008 0 0.014 0.010 0.008 0.008 0.016 0.008 0.028 0.020 0.016 0.016
190.500 304.800 +0.025 +0.013 +0.025 +0.025 +0.013 0.051 0.038 0.008 0.203 0 0.356 0.254 0.203 0.203 0.406 0.203 0.711 0.508 0.406 0.406
12.0000 24.0000 +0.0020 +0.0010 +0.0020 +0.0020 +0.0010 0.0020 0.0015 0.0007 0.015 0.015 0.015 0.015 0.030 0.030 0.030 0.030
* * ** **
304.800 609.600 +0.051 +0.025 +0.051 +0.051 +0.025 0.051 0.038 0.018 0.381 0.381 0.381 0.381 0.762 0.762 0.762 0.762
* * ** **
24.0000 36.0000 +0.0030 +0.0015 +0.0030 +0.0020 +0.0015 0.0030 0.0020 0.0020 — — 0.015 0.015 0.015 0.015 — — 0.030 0.030 0.016 0.016
609.600 914.400 +0.076(1) +0.038 +0.076 +0.051 +0.038 0.076 0.051 0.051 — — 0.381 0.381 0.381 0.381 — — 0.762 0.762 0.762 0.762
36.0000 48.0000 +0.0040 +0.0020 +0.0040 — +0.0020 0.0030 — 0.0030 — — 0.015 0.015 0.015 0.015 — — 0.030 0.030 0.016 0.016
914.400 1219.200 +0.102(1) +0.051 +0.102 — +0.051 0.076 — 0.076 — — 0.381 0.381 0.381 0.381 — — 0.762 0.762 0.762 0.762
48.0000 — +0.0050 +0.0030 +0.0050 — +0.0030 0.0030 — 0.0030 — — 0.015 0.015 0.015 0.015 — — 0.030 0.030 0.016 0.016
1219.200 — +0.127(1) +0.076 +0.127 — +0.076 0.076 — 0.076 — — 0.381 0.381 0.381 0.381 — — 0.762 0.762 0.762 0.762
The tolerances in this table conform to ANSI/ABMA Standard 19.2 (1)Applies to class 4 only.
* Cup O.D. ≤ 20" = ± .008"; >20" = ± .015" ** Cup O.D. ≤ 20" = ± .015"; >20" = ± .030"
Bearing Bore Tolerance Bearing O.D. Tolerance Bearing Bore Tolerance Bearing Bore Tolerance Bearing O.D. Tolerance Bearing Bore Tolerance
over incl. -0 over incl. +0.0 over incl. max. min. over incl. -0 over incl. +0.0
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
0.0000 6.7500 +0.0050 0.0000 5.3125 -0.0020 0.0000 1.8125 +0.0050 -0.0050 0.0000 19.8750 -0.0030 0.0000 23.0000 -0.0030 All Sizes ±.0150
0.000 171.450 +0.127 0.000 134.938 -0.051 0.000 46.038 +0.127 -0.127 0.000 504.825 -0.076 0.000 584.000 -0.076 ±.381
6.7500 20.0000 +0.0070 5.3125 17.3750 -0.0030 1.8125 12.0000 +0.0100 -0.0100 19.8750 60.0000 -0.0050 23.0000 70.0000 -0.0050
171.450 508.000 +0.178 134.938 441.325 -0.076 46.038 304.800 +0.254 -0.254 504.825 1524.000 -0.127 584.000 1778.000 -0.127
3.1496 4.7244 -0.0008 0.0010 4.7244 5.9055 -0.0080 0.0016 3.1496 4.7244 0.0037 0.0100
80.000 120.000 -0.020 0.025 120.000 150.000 -0.020 0.041 80.000 120.000 0.094 0.254
4.7244 7.0866 -0.0010 0.0012 5.9055 7.0866 -0.0010 0.0018 4.7244 7.0866 0.0043 0.0118
120.000 180.000 -0.025 0.030 150.000 180.000 -0.025 0.046 120.000 180.000 0.109 0.300
7.0866
180.000
9.8425
250.000
-0.0012
-0.030
0.0016
0.041
7.0866
180.000
9.8425
250.000
-0.0012
-0.030
0.0020
0.051
7.0866
180.000
9.8425
250.000
0.0051
0.130
0.0144
0.366 5
9.8425 12.4016 -0.0014 0.0020 9.8425 12.4016 -0.0014 0.0024 9.8425 12.4016 0.0061 0.0171
250.000 315.000 -0.036 0.051 250.000 315.000 -0.036 0.061 250.000 315.000 0.155 0.434
12.4016 15.7480 -0.0016 0.0024 12.4016 15.7480 -0.0016 0.0028 12.4016 15.7480 0.0067 0.0189
315.000 400.000 -0.041 0.061 315.000 400.000 -0.041 0.071 315.000 400.000 0.170 0.480
15.7480 19.6850 -0.0018 0.0026 15.7480 19.6850 -0.0018 0.0032 15.7480 19.6850 0.0073 0.0207
400.000 500.000 -0.046 0.066 400.000 500.000 -0.046 0.081 400.000 500.000 0.185 0.526
19.6850 24.8031 -0.0020 0.0028 19.6850 24.8031 -0.0020 0.0040 19.6850 and up 0.0080 0.0230
500.000 630.000 -0.051 0.071 500.000 630.000 -0.051 0.102 500.000 0.203 0.584
24.8031 31.4961 -0.0030 0.0032 24.8031 31.4961 -0.0030 0.0047
630.000 800.000 -0.076 0.081 630.000 800.000 -0.076 0.119
31.4961 39.3701 -0.0040 0.0035 31.4961 39.3701 -0.0040 0.0055
800.000 1000.000 -0.102 0.089 800.000 1000.000 -0.102 0.140
39.3701 49.2126 -0.0050 0.0040 39.3701 49.2126 -0.0050 0.0064
1000.000 1250.000 -0.127 0.102 1000.000 1250.000 -0.127 0.163
49.2126 62.9921 -0.0065 0.0076
1250.000 1600.000 -0.165 0.193
62.9921 78.7402 -0.0080 0.0090
1600.000 2000.000 -0.203 0.229
E25
Tolerances
THRUST ROLLER BEARINGS
The tolerances in this table conform to ANSI ⁄ ABMA Standard 21.2.
Certain applications for Timken Torrington cylindrical roller bearings
may require special precision tolerances. Timken Torrington has for
many years offered two high precision tolerance standards which
augment the ABMA tolerance system. If your application requires
precision beyond ABMA tolerances, ask a Timken sales engineer about
Torrington extraprecision and ultraprecision tolerances.
Bearing Bore Tolerance Bearing O.D. Tolerance Bearing Bore Tolerance Bearing Bore Tolerance Bearing O.D. Tolerance Bearing Bore Tolerance
over incl. +0.0 over incl. -0 over incl. +0.0 over incl. +0.0 over incl. -0 over incl. +0.0
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
2.0000 3.0000 -0.0010 5.0000 10.0000 +0.0015 0.0000 2.0000 -0.0060 2.0000 3.0000 -0.0010 5.0000 10.5000 +0.0019 0.0000 2.0000 -0.0080
50.800 76.200 -0.025 127.000 254.000 +0.038 0.000 50.800 -0.152 50.800 76.200 -0.025 127.000 266.700 +0.048 0.000 50.800 -0.203
3.0000 3.5000 -0.0012 10.0000 18.0000 +0.0020 2.0000 3.0000 -0.0080 3.0000 3.5000 -0.0012 10.5000 12.7500 +0.0021 2.0000 3.0000 -0.0100
76.200 88.900 -0.030 254.000 457.200 +0.051 50.800 76.200 -0.203 76.200 88.900 -0.030 266.700 323.850 +0.053 50.800 76.200 -0.254
3.5000 9.0000 -0.0015 18.0000 26.0000 +0.0025 3.0000 6.0000 -0.0100 3.5000 9.0000 -0.0015 12.7500 17.0000 +0.0023 3.0000 6.0000 -0.0150
88.900 228.600 -0.038 457.200 660.400 +0.640 76.200 152.400 -0.254 88.900 228.600 -0.038 323.850 431.800 +0.058 76.200 152.400 -0.381
9.0000 12.0000 -0.0018 26.0000 34.0000 +0.0030 6.0000 10.0000 -0.0150 9.0000 12.0000 -0.0018 17.0000 27.0000 +0.0025 6.0000 10.0000 -0.0200
228.600 304.800 -0.046 660.400 863.600 +0.076 152.400 254.000 -0.381 228.600 304.800 -0.046 431.800 685.800 +0.064 152.400 254.000 -0.508
12.0000 18.0000 -0.0020 34.0000 44.0000 +0.0040 10.0000 18.0000 -0.0200 12.0000 18.0000 -0.0020 27.0000 35.0000 +0.0030 10.0000 18.0000 -0.0250
304.800 457.200 -0.051 863.600 1117.600 +0.102 254.000 457.200 -0.508 304.800 457.200 -0.051 685.800 889.000 +0.076 254.000 457.200 -0.635
18.0000 22.0000 -0.0025 18.0000 30.0000 -0.0250 18.0000 22.0000 -0.0025 18.0000 30.0000 -0.0300
457.200 558.800 -0.064 457.200 762.000 -0.635 457.200 558.800 -0.064 457.200 762.000 -0.762
Bearing Bore Tolerance Bearing O.D. Tolerance Bearing Bore Tolerance Bearing Bore Tolerance Bearing O.D. Tolerance Bearing Bore Tolerance
over incl. -0 over incl. -0 over incl. -0 over incl. -0
in. in. in. in. in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm
0.0000 12.0000 +0.0010 0.0000 12.0000 +0.0010 All Sizes ±.0150 0.0000 12.0000 +0.0010 0.0000 12.0000 +0.0010 All Sizes ±.0150
0.000 304.800 +0.025 0.000 304.800 +0.025 ±.381 0.000 304.800 +0.025 0.000 304.800 +0.025 ±.381
12.0000 24.0000 +0.0020 12.0000 24.0000 +0.0020 12.0000 28.0000 +0.0020 12.0000 24.0000 +0.0020
304.800 609.600 +0.051 304.800 609.600 +0.051 304.800 711.200 +0.051 304.800 609.600 +0.051
24.0000 36.0000 +0.0030 24.0000 36.0000 +0.0030 28.0000 48.0000 +0.0030 24.0000 42.0000 +0.0030
609.600 914.400 +0.076 609.600 914.400 +0.076 711.200 1219.200 +0.076 609.600 1066.800 +0.076
36.0000 48.0000 +0.0040 36.0000 48.0000 +0.0040 48.0000 68.0000 +0.0040 42.0000 60.0000 +0.0040
914.400 1219.200 +0.102 914.400 1219.200 +0.102 1219.200 1727.200 +0.102 1066.800 1524.000 +0.102
E26
Example:
Outside Diameter, Housing Bore, Resultant Mounting Average Fit,
Inches Inches Fits, Inches Inches FINISH OF SHAFTS AND HOUSINGS
max. 3.5433 min. 3.5433 .0000 tight
.0003 loose
For ABEC-1 bearing applications shaft finish should be 32 micro inches
min. 3.5430 max. 3.5436 .0006 loose
AA maximum for shafts under 2 inches and 63 micro inches AA
maximum for shafts over 2 inches. Housing bores should be 125 micro
On high-speed applications, it is extremely important that the inches AA maximum regardless of size.
floating bearing or pair can move axially to compensate for thermal
changes. It cannot float laterally if restricted by a tight housing bore or
These figures are to be used as a guide only. Special situations may
demand better finishes.
5
by the radial expansion of the bearing itself. Cases involving unusual
conditions should be submitted to Timken Engineering for complete
recommendations.
It is equally important that all shaft and housing shoulders be
absolutely square, and that the faces of the spacers be square and
parallel.
E27
r7
r6
Tight Fit Range p6
n6
Shaft
O.D. m6
m5
Tolerance
k5 k6
Range Nominal Bearing Bore
j6
j5
➤
h6 h5 Bore Tolerance
➤
g6
Loose Fit Range
➤
➤
F7
Loose Fit Range
G7 H8
Housing H7
H6
Bore
J7 Nominal Bearing O.D.
Tolerance J6
➤
Range K6 K7 O.D.Tolerance
➤
M6 M7
N6 N7
Tight Fit Range P6 P7
➤
E28
Inner ring to be
(7)
0 Ce g6 easily displaced Wheels 0 C(6) All g6 All
on shaft Non-rotating shafts
Inner ring
0 Ce h6 does not need Tension pulleys 0 C All h6 All
to be easily
displaced
INNER RING ROTATING, OR INDETERMINATE Over Incl. Over Incl.
Electrical apparatus 100 140 k6(4) 3.94 5.51
Machine tools 140 320 m6(5) 5.51 12.60
(2)
0 0.07Ce j6 Light loads Pumps 0 0.08C 320 500 n6 12.60 19.68
Ventilators 500 – p6 19.68 –
Industrial trucks
0 Ce j6(3) Pure thrust loads All Not recommended, consult your local Timken sales engineer.
(1) (5)
For solid shaft. See pages E32 to E35 for numerical values. Use m5 for accurate applications.
(2) (6)
Use j5 for accurate applications. C = Dynamic Load Rating.
(3) (7)
Bearings with greater than nominal clearance must be used. Ce = Extended Dynamic Load Rating (Ball Bearings).
(4)
Use k5 for accurate applications.
HOUSING
Operating Conditions Examples Housing Outer Ring
Tolerance Displaceable
Symbol (1) Axially
E29
SHAFT
Conditions Examples Shaft Diameter Tolerance Remarks
(1)
mm Symbol
Rotating inner 18 65 m5
ring load or Normal and heavy loads Applications in general, electrical 65 100 m6
indeterminate P > 0.07C motors, turbines, pumps, combustion 100 140 n6
load direction ≤ 0.25C engines, gear transmissions, 140 280 p6
woodworking machines 280 500 r6
500 and up r7
18 65 m6
Very heavy loads and shock loads Journal boxes for locomotives and 65 100 n6 Bearings with greater clearance
P > 0.25C other heavy rail vehicles, 100 140 p6 than normal must be used.
traction motors 140 200 r6
200 500 r7
All loads Applications in general All diameters See tables for Reduction of RIC on page E19
(1)
For solid steel shaft. See tables on pages E32 to E35 for numerical value.
s4 FITS
s4 FITS
Bore Variance from Nominal Bore
A centrifugal force load produces a rotating outer ring load and a
mm Tolerance Shaft Diameter Fit
stationary inner ring load, even though the inner ring rotates. This makes Over Incl. +0 max. min.
it desirable to fit the outer ring tight in the housing (using a P6 fit as in. in. in. in.
shown on page E37), and the inner ring loose on the shaft using an s4 fit mm mm mm mm
as listed in the table. The standard W33 bearing with oil groove and oil
-6 -10 -14 4L
holes can be used. 14L
50 80
Data shown in ten-thousandths of an inch (6=.0006") or thousandths of a -15 -25 -36 10L
millimeter (15=0.015 mm). See dimensional tables for nominal bore. 36L
-8 -13 -17 5L
17L
80 120
-20 -33 -43 13L
43L
E30
HOUSING
Conditions Examples Tolerance Remarks
Symbol(2)
Two-bearing eccentric
Variable load direction P6
shaft mechanism
E31
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
5L 3L 2L 1L 1L 0T 2T
-3 -2 -5 0 -3 0 -2 +1 -1 +2 -1 +4 +2
1T 3T 3T 4T 5T +2 +0 5T 7T
3 6
12L 8L 5L 2L 2L 1T 4T
-8 -4 -12 0 -8 0 -5 +3 -2 +6 -2 +6 +1 +9 +4
4T 8T 8T 11T 14T 14T 17T
6L 4L 2L 1L 1L 0T 2T
-3 -2 -6 0 -4 0 -2 +2 -1 +3 -1 +5 +2
1T 3T 3T 5T 6T +3 +0 6T 8T
6 10
14L 9L 6L 2L 2L 1T 6T
-8 -5 -14 0 -9 0 -6 +4 -2 +7 -2 +12 +6
3T 8T 8T 12T 15T +7 +1 15T 20T
7L 4L 3L 1L 1L 0T 3T
-3 -2 -7 0 -4 0 -3 +2 -1 +3 -1 +6 +3
1T 3T 3T 5T 6T +4 +0 7T 9T
10 18
17L 11L 8L 3L 3L 1T 7T
-8 -6 -17 0 -11 0 -8 +5 -3 +8 -3
2T 8T 8T 13T 16T +9 +1 17T +15 +7 23T
8L 5L 2L 2L 1T 3T
-4 -3 -8 0 -5 +2 -2 +4 -2 +7 +3
1T 4T 6T 8T +4 +1 8T 11T
18 30
20L 13L 4L 4L 2T 8T
-10 -7 -20 0 -13 +5 -4 +9 -4 +11 +2 +17 +8
3T 10T 15T 19T 21T 27T
10L 6L 2L 2L 1T 1T 4T
-4.5 -4 -10 0 -6 +2 -2 +4 -2 +5 +1 +7 +1 +8 +4
0.5T 4.5T 6.5T 8.5T 9.5T 11.5T 12.5T
30 50
25L 16L 5L 5L 2T 2T 9T
-12 -9 -25 0 -16 +6 -5 +11 -5 +13 +2 +18 +2 +20 +9
3T 12T 18T 23T 25T 30T 32T
11L 7L 3L 3L 1T 1T 4T
-6 -4 -11 0 -7 +2 -3 +5 -3 +6 +1 +8 +1 +9 +4
2T 6T 8T 11T 12T 14T 15T
50 80
29L 19L 7L 7L 2T 2T 11T
-15 -10 -29 0 -19 +6 -7 +12 -7 +15 +2 +21 +2 +24 +11
5T 15T 21T 27T 30T 36T 39T
13L 9L 4L 4L 1T 1T 5T
-8 -5 -13 0 -9 +2 -4 +5 -4 +7 +1 +10 +1 +11 +5
3T 8T 10T 13T 15T 18T 19T
80 120
34L 22L 9L 9L 3T 3T 13T
-20 -12 -34 0 -22 +6 -9 +13 -9 +18 +3 +25 +3 +28 +13
8T 20T 26T 33T 38T 45T 48T
15L 10L 4L 4L 1T 1T 6T
-10 -6 -15 0 -10 +3 -4 +6 -4 +8 +1 +11 +1 +13 +6
4T 10T 13T 16T 18T 21T 23T
120 180
39L 25L 11L 11L 3T 3T 15T
-25 -14 -39 0 -25 +7 -11 +14 -11 +21 +3 +28 +3 +33 +15
11T 25T 32T 39T 46T 53T 58T
17L 11L 5L 5L 2T 7T
-12 -6 -17 0 -11 +3 -5 +6 -5 +9 +2 +15 +7
6T 12T 15T 18T 21T 27T
180 200
44L 29L 13L 13L 4T 17T
-30 -15 -44 0 -29 +7 -13 +16 -13 +24 +4 +37 +17
15T 30T 37T 46T 54T 67T
17L 11L 5L 5L 2T 7T
-12 -6 -17 0 -11 +3 -5 +6 -5 +9 +2 +15 +7
6T 12T 15T 18T 21T 27T
200 225
44L 29L 13L 13L 4T 17T
-30 -15 -44 0 -29 +7 -13 +16 -13 +24 +4 +37 +17
15T 30T 37T 46T 54T 67T
17L 11L 5L 5L 2T 7T
-12 -6 -17 0 -11 +3 -5 +9 +2 +15 +7
6T 12T 15T +6 -5 18T 21T 27T
225 250
44L 29L 13L 13L 4T 17T
-30 -15 -44 0 -29 +7 -13 +24 +4 +37 +17
15T 30T 37T +16 -13 46T 54T 67T
19L 13L 6L 6L 2T 8T
-14 -7 -19 0 -13 +3 -6 +11 +2 +17 +8
7T 14T 17T +6 -6 20T 25T 31T
250 280
49L 32L 16L 16L 4T 20T
-35 -17 -49 0 -32 +7 -16 +27 +4 +43 +20
18T 35T 42T +16 -16 51T 62T 78T
19L 13L 6L 6L 2T 8T
-14 -7 -19 0 -13 +3 -6 +11 +2 +17 +8
7T 14T 17T +6 -6 20T 25T 31T
280 315
49L 32L 16L 16L 4T 20T
-35 -17 -49 0 -32 +7 -16 +27 +4 +43 +20
18T 35T 42T +16 -16 51T 62T 78T
The tolerances in this table are in conformance with ANSI/ABMA Standard 7-1988
E32
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
-3
3 6
-8
-3
6 10
-8
-3
10 18
-8
-4
18 30
-10
4T
-5 +10 +4
14.5T
30 50
9T
-12 +25 +9
37T
4T 8T
-6 +12 +4 +15 +8
18T 21T
50 80
11T 20T
-15 +30 +11 +39 +20
45T 54T
5T 9T 15T
-8 +14 +5 +18 +9 +23 +15
22T 26T 31T
80 120
13T 23T 37T
-20 +35 +13 +45 +23 +59 +37
55T 65T 79T
7T
+60 +31
90T
12T
+79 +50
109T
20T
+106 +77
136T
31T 31T
5
-12 +18 +7 +24 +12 +31 +20 +43 +31 +50 +31
30T 36T 43T 55T 62T
200 225
17T 31T 50T 80T 80T
-30 +46 +17 +60 +31 +79 +50 +109 +80 +126 +80
76T 90T 109T 139T 156T
SHAFT (continued)
Bearing Bore g6 h6 h5 j5 j6 k5 k6 m5
Nominal Tol. Shaft Dia. Shaft Dia. Shaft Dia. Shaft Dia. Shaft Dia. Shaft Dia. Shaft Dia. Shaft Dia.
(max.) +0
Over Incl. To max. min. Fit max. min. Fit max. min. Fit max. min. Fit max. min. Fit max. min. Fit max. min. Fit max. min. Fit
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
21L 14L 7L 7L 2T 8T
-16 -7 -21 0 -14 +3 -7 +7 -7 +11 +2 +18 +8
9T 16T 19T 23T 27T 34T
315 355
54L 36L 18L 18L 4T 21T
-40 -18 -54 0 -36 +7 -18 +18 -18 +29 +4 +46 +21
22T 40T 47T 58T 69T 86T
21L 14L 7L 7L 2T 8T
-16 -7 -21 0 -14 +3 -7 +7 -7 +11 +2 +18 +8
9T 16T 19T 23T 27T 34T
355 400
54L 36L 18L 18L 4T 21T
-40 -18 -54 0 -36 +7 -18 +18 -18 +29 +4 +46 +21
22T 40T 47T 58T 69T 86T
24L 16L 8L 8L 2T 9T
-18 -8 -24 0 -16 +3 -8 +8 -8 +13 +2 +20 +9
10T 18T 21T 26T 31T 38T
400 450
60L 40L 20L 20L 5T 23T
-45 -20 -60 0 -40 +7 -20 +20 -20 +32 +5 +50 +23
25T 45T 52T 65T 77T 95T
24L 16L 8L 8L 2T 9T
-18 -8 -24 0 -16 +3 -8 +8 -8 +13 +2 +20 +9
10T 18T 21T 26T 31T 38T
450 500
60L 40L 20L 20L 5T 23T
-45 -20 -60 0 -40 +7 -20 +20 -20 +32 +5 +50 +23
25T 45T 52T 65T 77T 95T
The tolerances in this table are in conformation with ANSI/ABMA Standard 7-1988
E34
SHAFT
Bearing Bore m6 n6 p6 r6 r7
Nominal Tol. Shaft Dia. Shaft Dia. Shaft Dia. Shaft Dia. Shaft Dia.
(max.) +0 Fit Fit Fit Fit Fit
Over Incl. To max. min. max. min. max. min. max. min. max. min.
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
800 900
-39 +61 +39
100T
100T
+105 +83
144T
210T
+118 +83
157T
210T
5
-100 156 +100 +266 +210 +300 +210
256T 366T 400T
The tolerances in this table are in conformance with ANSI/ABMA Standard 7– 1988.
E35
HOUSING
Bearing O.D. F7 G7 H8 H7 H6 J6 J7 K6 K7
Nominal Tol. Housing Housing Housing Housing Housing Housing Housing Housing Housing
Bore Bore Bore Bore Bore Bore Bore Bore Bore
(max.) +0 Fit Fit Fit Fit Fit Fit Fit Fit Fit
Over Incl. To min. max min. max min. max min. max min. max min. max min. max min. max min. max
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
6L 2L 0L 0L 0L 2T 3T 4L 5T
-3 +6 +13 +2 +9 0 +11 0 +7 0 +4 -2 +2 -3 +4 -4 +1 -5 +2
16L 12L 14L 10L 7L 5L 7L 4T 5L
10 18
16L 6L 0L 0L 0L 5T 8T 9T 12T
-8 +16 +34 +6 +24 0 +27 0 +18 0 +11 -5 +6 -8 +10 -9 +2 -12 +6
42L 32L 35L 26L 19L 14L 18L 10L 14L
8L 3L 0L 0L 0L 2T 4T 4T 6T
-3.5 +8 +16 +3 +11 0 +13 0 +8 0 +5 -2 +3 -4 +5 -4 +1 -6 +2
19.5L 14.5L 16.5L 11.5L 8.5L 6.5L 8.5L 4.5L 5.5L
18 30
20L 7L 0L 0L 0L 5T 9T 11T 15T
-9 +20 +41 +7 +28 0 +33 0 +21 0 +13 -5 +8 -9 +12 -11 +2 -15 +6
50L 37L 42L 30L 22L 17L 21L 11L 15L
10L 4L 0L 0L 0L 2T 4T 5T 7T
-4.5 +10 +20 +4 +13 0 +15 0 +10 0 +6 -2 +4 -4 +6 -5 +1 -7 +3
24.5L 17.5L 19.5L 14.5L 10.5L 8.5L 10.5L 5.5L 7.5L
30 50
25L 9L 0L 0L 0L 6T 11T 13T 18T
-11 +25 +50 +9 +34 0 +39 0 +25 0 +16 -6 +10 -11 +14 -13 +3 -18 +7
61L 45L 50L 36L 27L 21L 25L 14L 18L
12L 4L 0L 0L 0L 2T 5T 6T 8T
-5 +12 +24 +4 +16 0 +18 0 +12 0 +7 -2 +5 -5 +7 -6 +2 -8 +4
29L 21L 23L 17L 12L 10L 12L 7L 9L
50 80
30L 10L 0L 0L 0L 6T 12T 15T 21T
-13 +30 +60 +10 +40 0 +46 0 +30 0 +19 -6 +13 -12 +18 -15 +4 -21 +9
73L 53L 59L 43L 32L 26L 31L 17L 22L
14L 5L 0L 0L 0L 2T 5T 7T 10T
-6 +14 +28 +5 +19 0 +21 0 +14 0 +9 -2 +6 -5 +9 -7 +2 -10 +4
34L 25L 27L 20L 15L 12L 15L 8L 10L
80 120
36L 12L 0L 0L 0L 6T 13T 18T 25T
-15 +36 +71 +12 +47 0 +54 0 +35 0 +22 -6 +16 -13 +22 -18 +4 -25 +10
86L 62L 69L 50L 37L 31L 37L 19L 25L
17L 6L 0L 0L 0L 3T 6T 8T 11T
-7 +17 +33 +6 +21 0 +25 0 +16 0 +10 -3 +7 -6 +10 -8 +2 -11 +5
40L 28L 32L 23L 17L 14L 17L 9L 12L
120 150
43L 14L 0L 0L 0L 7T 14T 21T 28T
-18 +43 +83 +14 +54 0 +63 0 +40 0 +25 -7 +18 -14 +26 -21 +4 -28 +12
101L 72L 81L 58L 43L 36L 44L 22L 30L
17L 6L 0L 0L 0L 3T 6T 8T 11T
-10 +17 +33 +6 +21 0 +25 0 +16 0 +10 -3 +7 -6 +10 -8 +2 -11 +5
43L 31L 35L 26L 20L 17L 20L 12L 15L
150 180
43L 14L 0L 0L 0L 7T 14T 21T 28T
-25 +43 +83 +14 +54 0 +63 0 +40 0 +25 -7 +18 -14 +26 -21 +4 -28 +12
108L 79L 88L 65L 50L 43L 51L 29L 37L
20L 6L 0L 0L 0L 3T 6T 9T 13T
-12 +20 +38 +6 +24 0 +28 0 +18 0 +11 -3 +9 -6 +12 -9 +2 -13 +5
50L 36L 40L 30L 23L 21L 24L 14L 17L
180 250
50L 15L 0L 0L 0L 7T 16T 24T 33T
-30 +50 +96 +15 +61 0 +72 0 +46 0 +29 -7 +22 -16 +30 -24 +5 -33 +13
126L 91L 102L 76L 59L 52L 60L 35L 43L
The tolerances in this table are in conformance with ANSI/ABMA Standard 7– 1988.
E36
HOUSING
Bearing O.D. M6 M7 N6 N7 P6 P7
Nominal Tol. Housing Housing Housing Housing Housing Housing
Bore Bore Bore Bore Bore Bore
(max.) +0 Fit Fit Fit Fit Fit Fit
Over Incl. To min. max min. max min. max min. max min. max min. max
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
6T 7T 8T 9T 10T 11T
-3 -6 -2 -7 0 -8 -4 -9 -2 -10 -6 -11 -4
1L 3L 1T 1L 3T 1T
10 18
15T 18T 20T 23T 26T - 29T
-8 -15 -4 -18 0 -20 -9 -23 -5 -26 -15 29 -11
4L 8L 1T 3L 7T 3T
16T
-46 0
30L
20T
-51 -22
8L
22T
-60 -14
16L
25T
-70 -41
11T
31T
-79 -33
3T
35T
5
-14 -16 -4 -20 0 -22 -10 -26 -6 -31 -19 -35 -14
10L 14L 4L 8L 5T 0L
250 315
41T 52T 57T 66T 79T 88T
-35 -41 -9 -52 0 -57 -25 -66 -14 -79 -47 -88 -36
26L 35L 10L 21L 12T 1T
The tolerances in this table are in conformance with ANSI/ABMA Standard 7 – 1988. Continued on the next page
E37
HOUSING (continued)
Bearing O.D. F7 G7 H8 H7 H6 J6 J7 K6 K7
Nominal Tol. Housing Housing Housing Housing Housing Housing Housing Housing Housing
Bore Bore Bore Bore Bore Bore Bore Bore Bore
(max.) +0 Fit Fit Fit Fit Fit Fit Fit Fit Fit
Over Incl. To min. max min. max min. max min. max min. max min. max min. max min. max min. max
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
The tolerances in this table are in conformance with ANSI/ABMA Standard 7 – 1988.
E38
HOUSING
Bearing O.D. M6 M7 N6 N7 P6 P7
in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
The tolerances in this table are in conformance with ANSI/ABMA Standard 7 – 1988.
E39
These diameters result in shaft to bearing These diameters result in shaft to bearing
bore fit which closely conforms to k5 listed on bore fit which closely conforms to g6 listed on
pages E32 and E34. pages E32 and E34.
SHAFT FITS, ABEC-1, ABEC-3
Basic Bore Shaft Rotating, Load Stationary or Shaft Stationary, Load Stationary or
Bearing Tolerance Shaft Stationary, Load Rotating Shaft Rotating, Load Rotating
Number (Typical Inner Ring Rotation) (Typical Outer Ring Rotation)
shaft diameter mean fit tight shaft diameter mean fit loose
max. min. max. min. ABEC-1 ABEC-3 max. min. ABEC-1 ABEC-3
in. mm in mm in. mm in mm in. mm in. mm in. mm in mm in. mm in. mm
33K3, F33K3 0.1250 3.175 0.1247 3.167 0.1252 3.180 0.1250 3.175 0.00025 0.006 0.00020 0.005 0.1248 3.170 0.1245 3.162 0.00020 0.005 0.00025 0.006
33K4 0.1250 3.175 0.1247 3.167 0.1252 3.180 0.1250 3.175 0.00025 0.006 0.00020 0.005 0.1248 3.170 0.1245 3.162 0.00020 0.005 0.00025 0.006
33K5 0.1875 4.762 0.1872 3.754 0.1877 4.768 0.1875 4.762 0.00025 0.006 0.00020 0.005 0.1873 4.752 0.1870 4.750 0.00020 0.005 0.00025 0.006
34K 0.1575 4.000 0.1572 3.992 0.1577 4.006 0.1575 4.001 0.00025 0.006 0.00020 0.005 0.1573 3.995 0.1570 3.988 0.00020 0.005 0.00025 0.006
35K 0.1969 5.000 0.1966 4.992 0.1971 5.006 0.1969 5.001 0.00025 0.006 0.00020 0.005 0.1967 4.996 0.1964 4.989 0.00020 0.005 0.00025 0.006
36K 0.2362 6.000 0.2359 5.992 0.2364 6.005 0.2362 5.999 0.00025 0.006 0.00020 0.005 0.2360 5.994 0.2357 5.987 0.00020 0.005 0.00025 0.006
37K 0.2756 7.000 0.2753 6.992 0.2758 7.005 0.2755 6.998 0.00020 0.005 0.00015 0.004 0.2754 6.995 0.2750 6.985 0.00025 0.006 0.00030 0.008
38K,38KV 0.3150 8.000 0.3147 7.992 0.3152 8.006 0.3149 7.998 0.00020 0.005 0.00015 0.004 0.3148 7.996 0.3144 7.986 0.00025 0.006 0.00030 0.008
39K 0.3543 9.000 0.3540 8.992 0.3545 9.004 0.3542 8.997 0.00020 0.005 0.00015 0.004 0.3541 8.994 0.3537 8.984 0.00025 0.006 0.00030 0.008
S1K,S1K7,FS1K7 0.2500 6.350 0.2497 6.342 0.2502 6.355 0.2499 6.347 0.00020 0.005 0.00015 0.004 0.2498 6.345 0.2494 6.335 0.00025 0.006 0.00030 0.008
S3K,FS3K 0.3750 9.525 0.3747 9.517 0.3752 9.530 0.3749 9.522 0.00020 0.005 0.00015 0.004 0.3748 9.520 0.3744 9.510 0.00025 0.006 0.00030 0.008
S5K 0.5000 12.700 0.4997 12.692 0.5002 12.705 0.4999 12.697 0.00020 0.005 0.00015 0.004 0.4998 12.695 0.4993 12.682 0.00030 0.008 0.00035 0.009
S7K 0.6250 15.875 0.6247 15.867 0.6252 15.880 0.6249 15.872 0.00020 0.005 0.00015 0.004 0.6248 15.870 0.6243 15.857 0.00030 0.008 0.00035 0.009
S8K 0.7500 19.050 0.7496 19.040 0.7504 19.060 0.7501 19.053 0.00045 0.011 0.00035 0.009 0.7497 19.042 0.7492 19.030 0.00035 0.009 0.00045 0.011
S9K 0.8750 22.225 0.8746 22.215 0.8754 22.235 0.8751 22.228 0.00045 0.011 0.00035 0.009 0.8747 22.217 0.8742 22.205 0.00035 0.009 0.00045 0.011
S10K 1.0000 25.400 0.9996 25.390 1.0004 25.410 1.0001 25.403 0.00045 0.011 0.00035 0.009 0.9997 25.392 0.9992 25.380 0.00035 0.009 0.00045 0.011
S11K 1.1250 28.575 1.1246 28.565 1.1254 28.585 1.1251 28.578 0.00045 0.011 0.00035 0.009 1.1247 28.567 1.1242 28.555 0.00035 0.009 0.00045 0.011
S12K 1.2500 31.750 1.2495 31.737 1.2505 31.763 1.2501 31.753 0.00055 0.014 0.00045 0.011 1.2496 31.740 1.2490 31.725 0.00045 0.011 0.00055 0.014
(1) (1)
F2DD-2 0.1253 3.183 0.1250 3.175 0.1250 3.175 0.1247 3.167 0.00030 0.008 0.00025 0.006 0.1250 3.175 0.1247 3.167 0.00030 0.008 0.00025 0.006
(1) (1)
F2 0.1878 4.770 0.1875 4.762 0.1875 4.762 0.1872 4.755 0.00030 0.008 0.00025 0.006 0.1875 4.762 0.1872 4.755 0.00030 0.008 0.00025 0.006
(1) (1)
F3 0.1878 4.770 0.1875 4.762 0.1875 4.762 0.1872 4.755 0.00030 0.008 0.00025 0.006 0.1875 4.762 0.1872 4.755 0.00030 0.008 0.00025 0.006
(1) (1)
F4 0.2503 6.358 0.2500 6.350 0.2500 6.350 0.2497 6.342 0.00030 0.008 0.00025 0.006 0.2500 6.350 0.2497 6.342 0.00030 0.008 0.00025 0.006
(1) (1)
F5 0.3128 7.946 0.3125 7.938 0.3125 7.938 0.3122 7.930 0.00030 0.008 0.00025 0.006 0.3125 7.938 0.3122 7.930 0.00030 0.008 0.00025 0.006
(1)
Mean fit loose. These sizes have plus bore tolerances.
E40
These diameters result in shaft to bearing These diameters result in shaft to bearing
bore fit which closely conforms to k5 listed on bore fit which closely conforms to g6 listed on
pages E32 and E34. pages E32 and E34.
SHAFT FITS, ABEC-1, ABEC-3
Basic Bore Shaft Rotating, Load Stationary or Shaft Stationary, Load Stationary or
Bearing Tolerance Shaft Stationary, Load Rotating Shaft Rotating, Load Rotating
Number
shaft diameter ( mean fit ) tight shaft diameter ( mean fit ) loose
max. min. max. min. ABEC-1 ABEC-3 max. min. ABEC-1 ABEC-3
00 0.3937 10 0.3934 9.992 0.3939 10.005 0.3936 9.997 0.0002 0.005 0.00015 0.004 0.3935 9.995 0.3931 9.985 0.00025 0.006 0.00030 0.008
01 0.4724 12 0.4721 11.992 0.4726 12.004 0.4723 11.996 0.0002 0.005 0.00015 0.004 0.4722 11.994 0.4717 11.981 0.00030 0.008 0.00035 0.009
02 0.5906 15 0.5903 14.992 0.5908 15.006 0.5905 14.999 0.0002 0.005 0.00015 0.004 0.5904 14.996 0.5899 14.983 0.00030 0.008 0.00035 0.009
03 0.6693 17 0.6690 16.992 0.6695 17.005 0.6692 16.998 0.0002 0.005 0.00015 0.004 0.6691 16.995 0.6686 16.982 0.00030 0.008 0.00035 0.009
04 0.7874 20 0.7870 19.990 0.7879 20.010 0.7875 20.002 0.0005 0.013 0.00035 0.009 0.7871 19.992 0.7866 19.980 0.00035 0.009 0.00045 0.011
05 0.9843 25 0.9839 24.990 0.9848 25.014 0.9844 25.004 0.0005 0.013 0.00035 0.009 0.9840 24.994 0.9835 24.981 0.00035 0.009 0.00045 0.011
06 1.1811 30 1.1807 29.990 1.1816 30.010 1.1812 30.002 0.0005 0.013 0.00035 0.009 1.1808 29.992 1.1803 29.980 0.00035 0.009 0.00045 0.011
07 1.3780 35 1.3775 34.987 1.3785 35.014 1.3781 35.004 0.0006 0.014 0.00045 0.011 1.3776 34.991 1.3770 34.976 0.00045 0.011 0.00055 0.014
08 1.5748 40 1.5743 39.987 1.5753 40.013 1.5749 40.002 0.0006 0.014 0.00045 0.011 1.5744 39.990 1.5738 39.975 0.00045 0.011 0.00055 0.014
09 1.7717 45 1.7712 44.987 1.7722 45.014 1.7718 45.004 0.0006 0.014 0.00045 0.011 1.7713 44.991 1.7707 44.976 0.00045 0.011 0.00055 0.014
10 1.9685 50 1.9680 49.987 1.9690 50.013 1.9686 50.002 0.0006 0.014 0.00045 0.011 1.9681 49.990 1.9675 49.974 0.00045 0.011 0.00055 0.014
11 2.1654 55 2.1648 54.985 2.1660 55.016 2.1655 55.004 0.0007 0.017 0.00055 0.014 2.1650 54.991 2.1643 54.973 0.00045 0.011 0.00055 0.014
12 2.3622 60 2.3616 59.985 2.3628 60.015 2.3623 60.002 0.0007 0.017 0.00055 0.014 2.3618 59.990 2.3611 59.972 0.00045 0.011 0.00055 0.014
13 2.5591 65 2.5585 64.985 2.5597 65.016 2.5592 65.004 0.0007 0.017 0.00055 0.014 2.5587 64.991 2.5580 64.973 0.00045 0.011 0.00055 0.014
14 2.7559 70 2.7553 69.985 2.7565 70.015 2.7560 70.002 0.0007 0.017 0.00055 0.014 2.7555 69.990 2.7548 69.972 0.00045 0.011 0.00055 0.014
15 2.9528 75 2.9552 74.985 2.9534 75.016 2.9529 75.004 0.0007 0.017 0.00055 0.014 2.9524 74.991 2.9517 74.973 0.00045 0.011 0.00055 0.014
16 3.1496 80 3.1490 79.985 3.1502 80.015 3.1497 80.002 0.0007 0.017 0.00055 0.014 3.1492 79.990 3.1485 79.972 0.00045 0.011 0.00055 0.014
17 3.3465 85 3.3457 84.980 3.3472 85.019 3.3466 85.004 0.0008 0.020 0.00065 0.017 3.3460 84.988 3.3452 84.968 0.00050 0.013 0.00065 0.017
18 3.5433 90 3.5425 89.980 3.5440 90.018 3.5434 90.002 0.0008 0.020 0.00065 0.017 3.5428 89.987 3.5420 89.967 0.00050 0.013 0.00065 0.017
19 3.7402 95 3.7394 94.980 3.7409 95.019 3.7403 95.004 0.0008 0.020 0.00065 0.017 3.7397 94.988 3.7389 94.968 0.00050 0.013 0.00065 0.017
20 3.9370 100 3.9362 99.980 3.9377 100.018 3.9371 100.002 0.0008 0.020 0.00065 0.017 3.9365 99.987 3.9357 99.967 0.00050 0.013 0.00065 0.017
21 4.1339 105 4.1331 104.980 4.1346 105.019 4.1340 105.004 0.0008 0.020 0.00065 0.017 4.1334 104.988 4.1326 104.968 0.00050 0.013 0.00065 0.017
22 4.3307 110 4.3299 109.980 4.3314 110.018 4.3308 110.002 0.0008 0.020 0.00065 0.017 4.3302 109.987 4.3294 109.967 0.00050 0.013 0.00065 0.017
EXTRA-LARGE SERIES
124, 224, 324 4.7244 120 4.7236 119.980 4.7251 120.018 4.7245 120.002 0.0008 0.020 0.00065 0.017 4.7239 119.987 4.7231 119.967 0.00050 0.013 0.00065 0.017
126, 226, 326 5.1181 130 5.1171 129.975 5.1189 130.020 5.1182 130.002 0.0010 0.024 0.00075 0.019 5.1175 129.984 5.1166 129.962 0.00055 0.014 0.00075 0.019
128, 228, 328
9130, 130, 230, 330
5.5118
5.9055
140
150
5.5108
5.9045
139.975
149.975
5.5126
5.9063
140.020
150.020
5.5119
5.9056
140.002
150.002
0.0010
0.0010
0.024
0.024
0.00075
0.00075
0.019
0.019
5.5112
5.9049
139.984
149.984
5.5103
5.9040
139.962
149.962
0.00055
0.00055
0.014
0.014
0.00075
0.00075
0.019
0.019
5
9132, 132, 232 6.2992 160 6.2982 159.975 6.3000 160.020 6.2993 160.002 0.0010 0.024 0.00075 0.019 6.2986 159.984 6.2977 159.962 0.00055 0.014 0.00075 0.019
9134, 134, 234 6.6929 170 6.6919 169.975 6.6937 170.020 6.6930 170.002 0.0010 0.024 0.00075 0.019 6.6923 169.984 6.6914 169.962 0.00055 0.014 0.00075 0.019
9136, 136, 236, 336 7.0866 180 7.0856 179.975 7.0874 180.020 7.0867 180.002 0.0010 0.024 0.00075 0.019 7.0860 179.984 7.0851 179.962 0.00055 0.014 0.00075 0.019
9138, 138, 238, 338 7.4803 190 7.4791 189.970 7.4813 190.025 7.4805 190.005 0.0012 0.030 0.00095 0.024 7.4797 189.984 7.4786 189.956 0.00055 0.014 0.00080 0.020
9140, 240, 340 7.8740 200 7.8728 199.969 7.8750 200.025 7.8742 200.005 0.0012 0.030 – – 7.8734 199.984 7.8722 199.954 0.00060 0.015 – –
9142, 242, 342 8.2677 210 8.2665 212.509 8.2587 209.771 8.2678 210.002 0.0012 0.030 – – 8.2672 209.987 8.2658 209.951 0.00060 0.015 – –
9144, 244, 344 8.6614 220 8.6602 219.969 8.6624 220.025 8.6616 220.005 0.0012 0.030 – – 8.6608 219.984 8.6596 219.954 0.00060 0.015 – –
9146, 246 9.0551 230 9.0539 229.969 9.0561 230.025 9.0553 230.005 0.0012 0.030 – – 9.0545 230.022 9.0533 229.951 0.00060 0.015 – –
248, 348 9.4488 240 9.4476 239.969 9.4498 240.025 9.4490 240.005 0.0012 0.030 – – 9.4482 239.984 9.4470 239.954 0.00060 0.015 – –
250 9.8425 250 9.8411 249.964 9.8434 250.020 9.8426 250.005 0.0012 0.030 – – 9.8418 250.022 9.8406 249.972 0.00060 0.015 – –
9152, 252, 352 10.2362 260 10.2348 259.964 10.2373 260.027 10.2364 260.005 0.0014 0.036 – – 10.2355 259.982 10.2343 259.951 0.00060 0.015 – –
9156, 256, 356 11.0236 280 11.0222 279.964 11.0247 280.027 11.0238 280.005 0.0014 0.036 – – 11.0229 279.982 11.0217 279.951 0.00060 0.015 – –
9160, 260 11.8110 300 11.8096 299.964 11.8121 300.027 11.8112 300.005 0.0014 0.036 – – 11.8103 299.982 11.8091 299.951 0.00060 0.015 – –
9164, 264 12.5984 320 12.5970 319.964 12.5996 320.030 12.5986 320.005 0.0015 0.038 – – 12.5977 319.982 12.5963 319.946 0.00060 0.015 – –
9180 15.7480 400 15.7464 399.969 15.7492 400.030 15.7482 400.005 0.0015 0.038 – – 15.7473 399.982 15.7459 399.946 0.00060 0.015 – –
E41
20 3.9370 100 3.9365 99.987 3.9369 99.997 3.9375 100.013 0.00045 0.011
21 4.1339 105 4.1334 104.988 4.1338 104.999 4.1344 105.014 0.00045 0.011
22 4.3307 110 4.3302 109.987 4.3306 109.997 4.3312 110.012 0.00045 0.011
24 4.7244 120 4.7239 119.987 4.7243 119.997 4.7249 120.012 0.00045 0.011
26 5.1181 130 5.1174 129.982 5.1180 129.997 5.1187 130.015 0.0006 0.015
28 5.5118 140 5.5111 139.982 5.5117 139.997 5.5124 140.015 0.0006 0.015
30 5.9055 150 5.9048 149.982 5.9054 149.997 5.9061 150.015 0.0006 0.015
E42
These diameters result in a bearing O.D. to These diameters result in a bearing O.D.
to housing bore fit which closely conforms to housing bore fit which closely conforms to
H6 listed on pages E36 and E38. M7 listed on pages E37 and E39.
HOUSING FITS, ABEC-1, ABEC-3
Basic Bearing Number Housing Stationary, Load Stationary or Housing Rotating, Load Stationary or
Housing Rotating, Load Rotating Housing Stationary, Load Rotating
Extra Extra Housing Bore, Mean Fit Loose Housing Bore, Mean Fit Tight
Small Light Light Medium Heavy minimum maximum ABEC–1 ABEC–3 minimum maximum ABEC–1 ABEC–3
(2)
30, S, F 9100, 9300 200, 300, 400
5200,7200 5300,7300 7400
SERIES SERIES SERIES SERIES SERIES in. mm in mm in. mm in. mm in. mm in mm in. mm in. mm
33K3, F33K3 – – – – 0.3750 9.525 0.3754 9.535 0.00040 0.010 0.00035 0.009 0.3743 9.507 0.3750 9.525 0.00015 0.004 0.00020 0.005
33K4 – – – – 0.5000 12.700 0.5004 12.710 0.00040 0.010 0.00035 0.009 0.4993 12.682 0.5000 12.700 0.00015 0.004 0.00020 0.005
33K5, F33K5 – – – – 0.5000 12.700 0.5004 12.710 0.00040 0.010 0.00035 0.009 0.4993 12.682 0.5000 12.700 0.00015 0.004 0.00020 0.005
34K – – – – 0.6299 15.999 0.6303 16.010 0.00040 0.010 0.00035 0.009 0.6292 15.982 0.6299 15.999 0.00015 0.004 0.00020 0.005
35K – – – – 0.7480 18.999 0.7485 19.012 0.00045 0.011 0.00040 0.010 0.7472 18.979 0.7480 18.999 0.00020 0.005 0.00025 0.006
36K – – – – 0.7480 18.999 0.7485 19.012 0.00045 0.011 0.00040 0.010 0.7472 18.979 0.7480 18.999 0.00020 0.005 0.00025 0.006
37K – – – – 0.8661 21.999 0.8666 22.012 0.00045 0.011 0.00040 0.010 0.8653 21.979 0.8661 29.999 0.00020 0.005 0.00025 0.006
38K – – – – 0.8661 21.999 0.8666 22.012 0.00045 0.011 0.00040 0.010 0.8653 21.979 0.8661 21.999 0.00020 0.005 0.00025 0.006
38KV – – – – 0.9449 24.000 0.9454 24.013 0.00045 0.011 0.00040 0.010 0.9441 23.980 0.9449 24.000 0.00020 0.005 0.00025 0.006
39K 9100 – – – 1.0236 25.999 1.0241 26.012 0.00045 0.011 0.00040 0.010 1.0228 25.979 1.0236 25.999 0.00020 0.005 0.00025 0.006
S1K7, FS1K7 – – – – 0.6250 15.875 0.6254 15.885 0.00040 0.010 0.00035 0.009 0.6243 15.857 0.6250 15.875 0.00015 0.004 0.00020 0.005
S1K – – – – 0.7500 19.050 0.7505 19.063 0.00045 0.011 0.00040 0.010 0.7492 19.030 0.7500 19.050 0.00020 0.005 0.00025 0.006
S3K, FS3K – – – – 0.8750 22.225 0.8755 22.238 0.00045 0.011 0.00040 0.010 0.8742 22.205 0.8750 22.225 0.00020 0.005 0.00025 0.006
S5K – – – – 1.1250 28.575 1.1255 28.588 0.00045 0.011 0.00040 0.010 1.1242 28.555 1.1250 28.575 0.00020 0.005 0.00025 0.006
S7K – – – – 1.3750 34.925 1.3756 34.940 0.00055 0.014 0.00045 0.011 1.3740 34.900 1.3750 34.925 0.00025 0.006 0.00035 0.009
S8K – – – – 1.6250 41.275 1.6256 41.290 0.00055 0.014 0.00045 0.011 1.6240 41.250 1.6250 41.275 0.00025 0.006 0.00035 0.009
S9K – – – – 1.8750 47.625 1.8756 47.640 0.00055 0.014 0.00045 0.011 1.8740 47.600 1.8750 47.625 0.00025 0.006 0.00035 0.009
S10K – – – – 2.0000 50.800 2.0007 50.818 0.00060 0.015 0.00055 0.014 1.9988 50.770 2.0000 50.800 0.00035 0.009 0.00040 0.010
S11K – – – – 2.1250 53.975 2.1257 53.993 0.00060 0.015 0.00055 0.014 2.1238 53.945 2.1250 53.975 0.00035 0.009 0.00040 0.010
S12K – – – – 2.2500 57.150 2.2507 57.168 0.00060 0.015 0.00055 0.014 2.2488 57.120 2.2500 57.150 0.00035 0.009 0.00040 0.010
F2002 – – – – 0.3750 9.525 0.3753 9.533 0.00000 0.000 0.00000 0.000 0.3749 9.522 0.3753 9.533 0.00000 0.000 0.00000 0.000
F2 – – – – 0.4375 11.112 0.4378 11.120 0.00000 0.000 0.00000 0.000 0.4374 11.110 0.4378 11.120 0.00000 0.000 0.00000 0.000
F3 – – – – 0.5624 14.285 0.5628 14.295 0.00000 0.000 0.00000 0.000 0.5624 14.285 0.5628 14.295 0.00000 0.000 0.00000 0.000
F4 – – – – 0.6249 15.872 0.6253 15.883 0.00000 0.000 0.00000 0.000 0.6249 15.872 0.6253 15.883 0.00000 0.000 0.00000 0.000
F5 – – – – 0.6874 17.460 0.6878 17.470 0.00000 0.000 0.00000 0.000 0.6874 17.460 0.6878 17.476 0.00000 0.000 0.00000 0.000
– 9101, 9302 – – – 1.1024 28.001 1.1029 28.014 0.00045 0.011 0.00040 0.010 1.1016 27.981 1.1024 28.001 0.00020 0.005 0.00025 0.006
– 9303 200 – – 1.1811 30.000 1.1816 30.013 0.00045 0.011 0.00040 0.010 1.1803 29.980 1.1811 39.000 0.00020 0.005 0.00025 0.006
– 9102 201 – – 1.2598 31.999 1.2604 32.014 0.00055 0.014 0.00045 0.011 1.2588 31.974 1.2598 31.999 0.00025 0.006 0.00035 0.009
–
–
9103
9304
202
–
300
301
–
–
1.3780
1.4567
35.001
37.000
1.3786
1.4573
35.016
37.015
0.00055
0.00055
0.014
0.014
0.00045
0.00045
0.011
0.011
1.3770
1.4557
34.976
36.975
1.3780
1.4567
35.001
37.000
0.00025
0.00025
0.006
0.006
0.00035
0.00035
0.009
0.009
5
– – 203 – – 1.5748 40.000 1.5754 40.015 0.00055 0.014 0.00045 0.011 1.5738 39.975 1.5748 40.000 0.00025 0.006 0.00035 0.009
– 9104, 9305 – 302 – 1.6535 41.999 1.6541 42.014 0.00055 0.014 0.00045 0.011 1.6525 41.974 1.6535 41.999 0.00025 0.006 0.00035 0.009
– 9105, 9306 204 303 – 1.8504 47.000 1.8510 47.015 0.00055 0.014 0.00045 0.011 1.8494 46.975 1.8504 47.000 0.00025 0.006 0.00035 0.009
– – 205 304 – 2.0472 51.999 2.0479 52.017 0.00060 0.015 0.00055 0.014 2.0460 51.968 2.0472 51.999 0.00035 0.009 0.00040 0.010
– 9106, 9307 – – – 2.1654 55.001 2.1661 55.019 0.00060 0.015 0.00055 0.014 2.1642 54.971 2.1654 55.001 0.00035 0.009 0.00040 0.010
– 9107, 9308 206 305 403 2.4409 61.999 2.4416 62.017 0.00060 0.015 0.00055 0.014 2.4397 61.968 2.4409 61.999 0.00030 0.009 0.00040 0.010
– 9108 – – – 2.6772 68.001 2.6779 68.019 0.00060 0.015 0.00055 0.014 2.6760 67.970 2.6772 68.001 0.00030 0.009 0.00040 0.010
– 9310 207 306 404 2.8346 71.999 2.8353 72.017 0.00060 0.015 0.00055 0.014 2.8334 71.968 2.8346 71.999 0.00030 0.009 0.00040 0.010
– 9109 – – – 2.9528 75.001 2.9535 75.019 0.00060 0.015 0.00055 0.014 2.9516 74.971 2.9528 75.001 0.00030 0.009 0.00040 0.010
– 9110 208 307 405 3.1496 80.000 3.1503 80.018 0.00060 0.015 0.00055 0.014 3.1484 79.969 3.1496 80.000 0.00030 0.009 0.00040 0.010
– 9312 209 – – 3.3465 85.001 3.3474 85.024 0.00080 0.019 0.00065 0.017 3.3451 84.966 3.3465 85.001 0.00040 0.010 0.00050 0.013
– 9111 210 308 406 3.5433 90.000 3.5442 90.023 0.00080 0.019 0.00065 0.017 3.5419 89.964 3.5433 90.000 0.00040 0.010 0.00050 0.013
– 9112 – – – 3.7402 95.001 3.7411 120.424 0.00080 0.019 0.00065 0.017 3.7388 94.965 3.7402 95.001 0.00040 0.010 0.00050 0.013
– 9113 211 309 407 3.9370 100.000 3.9379 100.023 0.00080 0.019 0.00065 0.017 3.9356 99.964 3.9370 100.000 0.00040 0.010 0.00050 0.013
– 9114 212 310 408 4.3307 110.000 4.3316 110.023 0.00080 0.019 0.00065 0.017 4.3293 109.964 4.3307 110.000 0.00040 0.010 0.00050 0.013
(2)
400 Series are "specials", consult Timken Engieering.
E43
These diameters result in a bearing O.D. to These diameters result in a bearing O.D. to
housing bore fit which closely conforms to housing bore fit which closely conforms to
H6 listed on pages E36 and E38. M7 listed on pages E37 and E39.
HOUSING FITS, ABEC-1, ABEC-3
Basic Bearing Number Housing Stationary, Load Stationary or Housing Rotating, Load Stationary or
Housing Rotating, Load Rotating Housing Stationary, Load Rotating
Extra Extra
Small Light Light Medium Heavy Housing Bore mean fit loose Housing Bore mean fit tight
— 9115 — — — 4.5276 115.001 4.5285 115.024 0.0008 0.019 0.00065 0.017 4.5262 114.965 4.5276 115.001 0.0004 0.010 0.00050 0.013
— — 213 311 409 4.7244 120.000 4.7253 120.023 0.0008 0.019 0.00065 0.017 4.7230 119.964 4.7244 120.000 0.0004 0.010 0.00050 0.013
— — 214 — — 4.9213 125.001 4.9223 125.026 0.0009 0.023 0.00075 0.019 4.9197 124.960 4.9213 125.001 0.0004 0.010 0.00055 0.014
— 9117 215 312 410 5.1181 130.000 5.1191 130.025 0.0009 0.023 0.00075 0.019 5.1165 129.959 5.1181 130.000 0.0004 0.010 0.00055 0.014
— 9118 216 313 411 5.5118 140.000 5.5128 140.025 0.0009 0.023 0.00075 0.019 5.5102 139.959 5.5118 140.000 0.0004 0.010 0.00055 0.014
— 9120 217 314 412 5.9055 150.000 5.9065 150.025 0.0009 0.023 0.00075 0.019 5.9039 149.959 5.9055 150.000 0.0004 0.010 0.00055 0.014
— 120–2 218 315 — 6.2992 160.000 6.3002 160.025 0.0010 0.025 0.00080 0.020 6.2976 159.959 6.2992 160.000 0.0003 0.008 0.00050 0.013
— 9121 — — 413 6.2992 160.000 6.3002 160.025 0.0010 0.025 0.00080 0.020 6.2976 159.959 6.2992 160.000 0.0003 0.008 0.00050 0.013
— 9122 129 316 — 6.6929 170.000 6.6939 170.025 0.0010 0.025 0.00080 0.020 6.6913 169.959 6.6929 170.000 0.0003 0.008 0.00050 0.013
— 122 — — — 6.8898 175.000 6.8908 175.026 0.0010 0.025 0.00080 0.020 6.8882 174.960 6.8898 175.001 0.0003 0.008 0.00050 0.013
— 9124 220 317 414 7.0866 180.000 7.0876 180.025 0.0010 0.025 0.00080 0.020 7.0850 179.959 7.0866 180.000 0.0003 0.008 0.00050 0.013
— 124 221 318 415 7.4803 190.000 7.4815 190.028 0.0012 0.029 0.00090 0.023 7.4785 189.954 7.4803 190.000 0.0003 0.008 0.00055 0.014
— 9126 222 319 416 7.8740 200.000 7.8752 200.028 0.0012 0.029 0.00090 0.023 7.8722 199.954 7.8740 200.000 0.0003 0.008 0.00055 0.014
— 126 — — — 8.0709 205.001 8.0721 205.029 0.0012 0.029 0.00090 0.023 8.0691 204.955 8.0709 205.001 0.0003 0.008 0.00055 0.014
— 9128 — — — 8.2677 210.000 8.2689 210.028 0.0012 0.029 0.00090 0.023 8.2659 209.954 8.2677 210.000 0.0003 0.008 0.00055 0.014
— — 224 320 — 8.4646 215.001 8.4658 215.029 0.0012 0.029 0.00090 0.023 8.4628 214.955 8.4646 215.001 0.0003 0.008 0.00055 0.014
— 128 — — — 8.6614 220.000 8.6626 220.028 0.0012 0.029 0.00090 0.023 8.6596 219.954 8.6614 220.000 0.0003 0.008 0.00055 0.014
— 9130 — 321 418 8.8583 225.001 8.8595 225.029 0.0012 0.029 0.00090 0.023 8.8565 224.955 8.8583 225.001 0.0003 0.008 0.00055 0.014
— — 226 — — 9.0551 230.000 9.0563 230.027 0.0012 0.029 0.00090 0.023 9.0533 229.954 9.0551 230.000 0.0003 0.008 0.00055 0.014
— 130 — — — 9.2520 235.001 9.2532 235.029 0.0012 0.029 0.00090 0.023 9.2502 234.955 9.2520 235.001 0.0003 0.008 0.00055 0.014
— 9132 — 322 — 9.4488 240.000 9.4506 240.027 0.0012 0.029 0.00090 0.023 9.4470 239.954 9.4488 240.000 0.0003 0.008 0.00055 0.014
— 132 228 — — 9.8425 250.000 9.8437 250.027 0.0012 0.029 0.00090 0.023 9.8407 249.954 9.8425 250.000 0.0003 0.008 0.00055 0.014
— 9134 — 324 — 10.2362 259.999 10.2374 260.032 0.0013 0.033 0.00105 0.027 10.2342 259.942 10.2362 259.999 0.0003 0.008 0.00060 0.015
— 134 — — 420 10.4331 265.001 10.4343 265.034 0.0013 0.033 0.00105 0.027 10.4311 264.950 10.4331 265.001 0.0003 0.008 0.00060 0.015
— — 230 — — 10.6299 269.999 10.6311 270.032 0.0013 0.033 0.00105 0.027 10.6279 269.949 10.6299 269.999 0.0003 0.008 0.00060 0.015
— 136,9136 — 326 — 11.0236 279.999 11.0248 280.032 0.0013 0.033 0.00105 0.027 11.0216 279.949 11.0236 279.999 0.0003 0.008 0.00060 0.015
— 9138 232 — — 11.4173 289.999 11.4185 290.039 0.0013 0.033 0.00105 0.027 11.4153 289.949 11.4173 289.999 0.0003 0.008 0.00060 0.015
— 138 — 328 — 11.8110 299.999 11.8122 300.032 0.0013 0.033 0.00105 0.027 11.8090 299.949 11.8110 299.999 0.0003 0.008 0.00060 0.015
— 9140 234 — — 12.2047 309.999 12.2059 310.029 0.0013 0.033 — — 12.2027 309.949 12.2047 309.999 0.0003 0.008 — —
— — 236 330 — 12.5984 319.999 12.5998 320.035 0.0015 0.038 — — 12.5962 319.943 12.5984 319.999 0.0003 0.008 — —
— 9144 238 — — 13.3858 339.999 13.3872 340.035 0.0015 0.038 — — 13.3836 339.943 13.3858 339.999 0.0003 0.008 — —
— 9146 240 — — 14.1732 359.999 14.1746 360.035 0.0015 0.038 — — 14.1710 359.943 14.1732 359.999 0.0003 0.008 — —
— — 242 336 — 14.9606 380.007 14.9620 380.035 0.0015 0.038 — — 14.9584 379.943 14.9606 379.999 0.0003 0.008 — —
— 9152 244 338 — 15.7480 399.999 15.7494 400.035 0.0015 0.038 — — 15.7458 399.943 15.7480 399.999 0.0003 0.008 — —
— 9156 246 340 — 16.5354 419.999 16.5370 420.040 0.0017 0.038 — — 16.5329 419.936 16.5354 419.999 0.0004 0.010 — —
— — 248 342 — 17.3228 439.999 17.3244 440.040 0.0017 0.038 — — 17.3203 439.936 17.3228 439.999 0.0004 0.010 — —
— 9160 250 344 — 18.1102 459.999 18.1118 460.040 0.0017 0.038 — — 18.1077 459.936 18.1102 459.999 0.0004 0.010 — —
— 9164 252 — — 18.8976 479.999 18.8992 480.040 0.0017 0.038 — — 18.8951 479.936 18.8976 479.999 0.0004 0.010 — —
— — 256 348 — 19.6850 499.999 19.6866 500.040 0.0017 0.038 — — 19.6825 499.936 19.6850 499.999 0.0004 0.010 — —
— — 260 352 — 21.2598 539.999 21.2615 540.042 0.0019 0.048 — — 21.2571 539.930 21.2598 539.999 0.0004 0.010 — —
— — 264 356 — 22.8346 579.999 22.8363 580.042 0.0019 0.048 — — 22.8319 579.930 22.8346 579.999 0.0004 0.010 — —
— 9180 — — — 23.6220 599.999 23.6237 600.042 0.0019 0.048 — — 23.6193 599.930 23.6220 599.999 0.0004 0.010 — —
E44
SHAFT
Shaft and housing diameter are shown in inches over millimeters with
millimeters printed in blue.
Mounting Shaft Shaft Diameter Shaft
Conditions Service Finish Tolerance
Over Incl. Symbol
Steady load 7.5 36.0
Rotating Cone Ground
moderate shock 190.5 914.0 t1
Ground
7.5 24.0
or
Heavy loads, 190.5 610.0
Rotating or Turned *
high speeds or
Stationary Cone shock
Ground 24.0 36.0
610.0 914.0 t2
7.5 36.0
Turned
Moderate loads, 190.5 914.0 t3
no shock
Ground
7.5 36.0
Stationary Cone Sheaves, wheels, etc. Turned 190.5 914.0 t4
*Use “Turned Shaft Fitting Practice, “ an average cone interference fit of 0.0005 inches (0.013mm)
per inch (25.4mm) of bore diameter.
HOUSING
Mounting Housing Diameter Housing
Conditions Service Tolerance
Over Incl. Symbol
10.5 36.0
Adjustable
266.7 914.0 T3
E45
SHAFT
Bearing Bore t1 t2 t3 t4 t5
Nominal
(min.) Tol. Shaft Diam. Shaft Diam. Shaft Diam. Shaft Diam. Shaft Diam.
Over Incl. –0 max. min. Fit max. min. Fit max. min. Fit max. min. Fit max. min. Fit
in in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
24.0000 36.0000 +30 +75 +45 15T +150 +120 90T +30 0 30L 0 -30 0L For
75T 150T 30T 60L — Class 4
609.600 914.400 +76 +191 +114 38T +381 +305 229T +76 0 76L 0 -76 0L bearings
191T 381T 76T 152L only
HOUSING
Bearing O.D. T1 T2 T3 T4 T5
Nominal Tol. Housing Bore Housing Bore Housing Bore Housing Bore Housing Bore
(min.) Fit Fit Fit Fit Fit
Over Incl. –0 max. min. max. min. max. min. max. min. max. min.
in in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
10.5000 12.0000 +10 +20 +30 10L +10 +20 0L 0 +20 10T -20 -10 10T -30 -20 20T
30L 20L 20L 30T 40T For
266.700 304.800 +25 +51 +76 25L +25 +51 0L 0 +51 25T -51 -25 25T -76 -51 51T Class 2 or
76L 51L 51L 76T 102T Class 4
bearings
12.0000 24.0000 +20 +40 +60 20L +20 +40 0L +10 +30 10T -30 -10 10T -40 -20 20T
60L 40L 30L 50T 60T
304.800 609.600 +51 +102 +152 51L +51 +102 0L +25 +76 25T -76 -25 25T -102 -51 51T
152L 102L 76L 127T 152T
24.0000 36.0000 +30 +60 +90 30L +30 +60 0L +20 +50 10T -40 -10 10T For
90L 60L 50L 70T — Class 4
609.600 914.400 +76 +152 +229 76L +76 +152 0L +51 +127 25T -102 -25 25T bearings
229L 152L 127L 178T only
E46
in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm
HOUSING HOUSING
Bearing O.D. Housing Bore Bearing O.D. Shaft Diameter
nominal (max.) nominal (max.) Loose Fit** Interference Fit*
Over Incl. Max. Min. Over Incl. Max. Min. Max. Min.
in. in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm mm
4.7188 17.3750 +0.0090 +0.0050 0.0000 23.0000 +0.0060 0.0030 -0.0060 -0.0030
119.858 441.325 +0.229 +0.127 0.000 584.000 +0.152 0.076 -0.152 -0.076
17.3750 39.3701 +0.0100 +0.0060 23.0000 70.0000 +0.0100 0.0050 -0.0100 -0.0050
441.325 1000.000 +0.254 +0.152 584.000 1778.000 +0.254 0.127 -0.254 -0.127
* Dowel pin suggested. ** Dowel pin required.
Housing Bore
THRUST SPHERICAL ROLLER BEARING
Tolerances for housing bore and for shaft diameters shown as variance
from nominal bearing dimension.
Data shown in inches over millimeters.
When application calls for thrust loads only, the housing must be
relieved by 1⁄16" on diameter so that no radial load is carried on the
bearing.
Shaft Diameter
SHAFT HOUSING
Tolerances are 1/10,000 of an inch (5 = .0005") and 1/1000 of a millimeter (µm ) Tolerances are 1/10,000 of an inch (5 = .0005") and 1/1000 of a millimeter (µm )
Bearing Bore Shaft Diameter Bearing O.D. Housing Bore
nominal (max.) Stationary Load Rotating Load nominal (max.)
Springs in Combined Axial &Radial Load
inches Housing
Over Incl. max. min. max. min. Light Radial Stationary Rotating
inches Load Outer Ring Outer Ring
in. in. in. in. in. in.
mm mm mm mm mm mm Over Incl. min. max. min. max. min. max.
3.1496 4.7244 +5 -4 +10 +1 in. in. in. in. in. in. in. in.
80 120 +13 -10 +25 +3 mm mm mm mm mm mm mm mm
4.7244
120
7.0866
180
+6
+15
-4
-10
+11
+28
+1
+3
7.0866
180
9.8425
250
+6
+15
+24
+61
-7
-18
+11
+28
-13
-33
+5
+13
5
7.0866 7.8740 +7 -5 +14 +2 9.8425 12.4016 +7 +27 -7 +13 -14 +6
180 200 +18 -13 +36 +5 250 315 +18 +69 -18 +33 -36 +15
19.6850 24.8031 +9 -8 +34 +17 31.4960 39.3700 +10 +43 -10 +23 -23 +10
500 630 +23 -20 +86 +43 800 1000 +25 +109 -25 +58 -58 +25
E47
E48
Over Incl.
Max.+0
Min.
Thrust Blocks
Max. Min. Over
nominal (min.)
Incl. max. min. 5
in. in. in. in. in. in. in. in. in.
mm mm mm mm mm mm mm mm mm
E49
9301K 0.58 14.7 0.85 21.6 33K3 0.20 5.1 0.19 4.8 0.32 8.1 0.31 7.9
9302K 0.70 17.8 1.00 25.4 33K4 0.24 6.1 0.23 5.8 0.44 11.2 0.43 10.9
9303K 0.78 19.8 1.08 27.4 33K5 0.26 6.6 0.25 6.4 0.44 11.2 0.43 10.9
9304K 0.94 23.9 1.32 33.5 34K 0.26 6.6 0.25 6.4 0.56 14.2 0.55 14.0
9305K 1.14 29.0 1.52 38.6 35K 0.37 9.4 0.36 9.1 0.67 17.0 0.66 16.8
9306K 1.32 33.5 1.71 43.4 36K 0.37 9.4 0.36 9.1 0.67 17.0 0.66 16.8
9307K 1.56 39.6 2.00 50.8 37K 0.44 11.2 0.42 10.7 0.79 20.1 0.77 19.6
9308K 1.77 45.0 2.26 57.4 38K 0.45 11.4 0.43 10.9 0.79 20.1 0.77 19.6
9309K 1.98 50.3 2.49 63.2 38KV 0.45 11.4 0.43 10.9 0.79 20.1 0.77 19.6
9310K 2.16 54.9 2.66 67.6 39K 0.51 13.0 0.49 12.5 0.91 23.1 0.89 22.6
9311K 2.40 61.0 2.94 74.7 S1K7 0.34 8.6 0.32 8.1 0.56 14.2 0.54 13.7
9312K 2.59 65.8 3.14 79.8 S1K 0.37 9.4 0.35 8.9 0.69 17.5 0.67 17.0
S3K 0.50 12.7 0.48 12.2 0.80 20.3 0.78 19.8
S5K 0.63 16.0 0.61 15.5 0.99 25.1 0.97 24.6
S7K 0.84 21.3 0.80 20.3 1.24 31.5 1.20 30.5
S8K 0.97 24.6 0.93 23.6 1.46 37.1 1.40 35.6
S9K 1.14 28.9 1.10 27.9 1.65 41.9 1.61 40.9
S10K 1.24 31.5 1.20 30.5 1.84 46.7 1.80 45.7
S11K 1.34 34.0 1.30 33.0 1.95 49.5 1.91 48.5
S12K 1.55 39.4 1.51 38.4 2.20 55.9 2.00 50.8
E50
9100 0.52 13.2 0.47 11.9 0.95 24.1 0.91 23.1 200 0.56 14.2 0.50 12.7 0.98 24.9 0.97 24.6 300 0.59 15.0 0.50 12.7 1.18 30.0 1.15 29.2
9101 0.71 18.0 0.55 14.0 1.02 25.9 0.97 24.6 201 0.64 16.3 0.58 14.7 1.06 26.9 1.05 26.7 301 0.69 17.5 0.63 16.0 1.22 31.0 1.21 30.7
9102 0.75 19.0 0.67 17.0 1.18 30.0 1.13 28.7 202 0.75 19.0 0.69 17.5 1.18 30.0 1.15 29.2 302 0.81 20.6 0.75 19.0 1.42 36.1 1.40 35.6
9103 0.81 20.6 0.75 19.0 1.30 33.0 1.25 31.8 203 0.84 21.3 0.77 19.6 1.34 34.0 1.31 33.3 303 0.91 23.1 0.83 21.1 1.61 40.9 1.60 40.6
9104 0.98 24.9 0.89 22.6 1.46 37.1 1.41 35.8 204 1.00 25.4 0.94 23.9 1.61 40.9 1.58 40.1 304 1.06 26.9 0.94 23.9 1.77 45.0 1.75 44.4
9105 1.18 30.0 1.08 27.4 1.65 41.9 1.60 40.6 205 1.22 31.0 1.14 29.0 1.81 46.0 1.78 45.2 305 1.31 33.3 1.14 29.0 2.17 55.1 2.09 53.1
9106 1.38 35.1 1.34 34.0 1.93 49.0 1.88 47.8 206 1.47 37.3 1.34 34.0 2.21 56.1 2.16 54.9 306 1.56 39.6 1.34 34.0 2.56 65.0 2.44 62.0
9107 1.63 41.4 1.53 38.9 2.21 56.1 2.15 54.6 207 1.72 43.7 1.53 38.9 2.56 65.0 2.47 62.7 307 1.78 45.2 1.69 42.9 2.80 71.1 2.72 69.1
9108 1.81 46.0 1.73 43.9 2.44 62.0 2.39 60.7 208 1.94 49.3 1.73 43.9 2.87 72.9 2.78 70.6 308 2.00 50.8 1.93 49.0 3.19 81.0 3.06 77.7
9109 2.03 51.6 1.94 49.3 2.72 69.1 2.67 67.8 209 2.13 54.1 1.94 49.3 3.07 78.0 2.97 75.4 309 2.28 57.9 2.13 54.1 3.58 90.9 3.41 86.6
9110 2.22 56.4 2.13 54.1 2.91 73.9 2.86 72.6 210 2.34 59.4 2.13 54.1 3.27 83.1 3.17 80.5 310 2.50 63.5 2.36 59.9 3.94 100.1 3.75 95.2
9111 2.48 63.0 2.33 59.2 3.27 83.1 3.22 81.8 211 2.54 64.5 2.41 61.2 3.68 93.5 3.56 90.4 311 2.75 69.8 2.56 65.0 4.33 110.0 4.13 104.9
9112 2.67 67.8 2.53 64.3 3.47 88.1 3.42 86.9 212 2.81 71.4 2.67 67.8 3.98 101.1 3.87 98.3 312 2.94 74.7 2.84 72.1 4.65 118.1 4.44 112.8
9113 2.84 72.1 2.72 69.1 3.66 93.0 3.61 81.7 213 3.03 77.0 2.86 72.6 4.37 111.0 4.19 106.4 313 3.19 81.0 3.03 77.0 5.04 128.0 4.81 122.2
9114 3.11 79.0 2.91 73.9 4.06 103.1 3.97 100.8 214 3.22 81.8 3.06 77.7 4.57 116.1 4.41 112.0 314 3.44 87.4 3.23 82.0 5.43 137.9 5.13 130.3
9115 3.31 84.1 3.11 79.0 4.25 108.0 4.16 105.7 215 3.44 87.4 3.25 82.6 4.76 120.9 4.59 116.6 315 3.88 98.6 3.43 87.1 5.83 148.1 5.50 139.7
9116 3.56 90.4 3.31 84.1 4.65 118.1 4.50 114.3 216 3.69 93.7 3.55 90.2 5.12 130.0 4.93 125.2 316 3.94 100.1 3.62 91.9 6.22 158.0 5.88 149.4
9117 3.75 95.2 3.50 88.9 4.84 122.9 4.71 119.6 217 3.88 98.6 3.75 95.2 5.51 140.0 5.31 134.9 317 4.13 104.9 3.90 99.1 6.54 166.1 6.19 157.2
9118 4.03 102.4 3.84 97.5 5.16 131.1 5.13 130.3 218 4.16 105.7 3.94 100.1 5.91 150.1 5.62 142.7 318 4.38 111.3 4.09 103.9 6.93 176.0 6.50 165.1
9120 4.38 111.3 4.23 107.4 5.55 141.0 5.44 138.2 219 4.38 111.3 4.21 106.9 6.22 158.0 6.06 153.9 319 4.63 117.6 4.29 109.0 7.32 185.9 6.88 174.8
9121 4.66 118.4 4.53 115.1 5.91 150.1 5.75 146.0 220 4.63 117.6 4.41 112.0 6.61 167.9 6.31 160.3 320 4.88 124.0 4.49 114.0 7.91 200.9 7.38 187.4
9122 4.91 124.7 4.72 119.9 6.30 160.0 6.18 157.0 221 4.88 124.0 4.61 117.1 7.01 178.1 6.88 174.8 321 5.13 130.3 4.69 119.1 8.31 211.1 7.75 196.8
9124 5.28 134.1 5.12 130.0 6.69 169.9 6.50 165.1 222 5.13 130.3 4.80 121.9 7.40 188.0 7.06 179.3 322 5.50 139.7 4.88 124.0 8.90 226.1 8.25 209.6
9126 5.81 147.6 5.51 140.0 7.48 190.0 7.25 184.1 224 5.63 143.0 5.20 132.1 7.99 202.9 7.56 192.0 324 6.00 152.4 5.28 134.1 9.69 246.1 8.93 226.8
9128 6.06 153.9 5.81 147.6 7.88 200.2 7.68 195.1 226 6.00 152.4 5.67 144.0 8.50 215.9 8.13 206.5 326 6.44 163.6 5.83 148.1 10.32 262.1 9.69 246.1
9130 6.59 167.4 6.38 162.1 8.39 213.1 8.13 206.5 228 6.50 165.1 6.06 153.9 9.29 236.0 8.81 223.8 328 6.93 176.0 6.22 158.0 11.10 281.9 10.38 263.7
9132 6.96 176.8 6.56 166.6 9.00 228.6 8.75 222.2 230 6.97 177.0 6.46 164.1 10.08 256.0 9.50 241.3 330 7.44 189.0 6.61 167.9 11.89 302.0 11.06 280.9
9134 7.56 192.0 7.17 182.1 9.76 247.9 9.44 239.8 232 7.36 186.9 6.85 174.0 10.87 276.1 10.25 260.4 332 7.84 188.0 7.01 178.0 12.68 322.1 11.58 294.1
9138 8.38 212.9 7.95 201.9 10.95 278.1 10.50 266.7 234 7.98 202.7 7.40 188.0 11.50 292.1 10.88 276.4 334 8.40 213.4 7.40 188.0 13.47 342.1 12.27 311.7
9140 8.84 224.5 8.35 212.1 11.73 297.9 11.22 285.0 236 8.38 212.9 7.80 198.1 11.89 302.0 11.09 281.7 336 8.80 223.5 7.80 198.1 14.25 362.0 13.05 331.5
9144 9.70 246.4 9.21 233.9 12.84 326.1 12.24 310.9 238 8.77 222.8 8.19 208.0 12.68 322.1 11.88 301.8 338 9.35 237.5 8.35 212.1 14.89 378.2 13.59 345.2
9148 10.50 266.7 10.00 254.0 13.62 345.9 13.02 330.7 240 9.42 239.3 8.58 217.9 13.47 342.1 12.57 319.3 340 9.84 249.9 8.74 222.0 15.67 398.0 14.37 365.0
9152 11.49 291.8 10.95 278.1 15.04 382.0 14.44 366.8 242 9.69 246.1 8.87 225.3 14.26 362.2 13.26 336.8 342 10.24 260.1 9.14 232.2 16.47 418.3 15.17 385.3
9156 12.33 313.2 11.73 297.9 15.83 402.1 15.23 386.8 244 10.14 257.6 9.37 238.0 15.04 382.0 14.04 356.6 344 10.73 272.5 9.53 242.1 17.24 437.9 15.96 405.4
9160 13.36 339.3 12.52 318.0 17.40 442.0 16.60 421.6 246 10.58 268.7 9.76 247.9 15.83 402.1 14.60 370.8 348 11.52 292.6 10.32 262.1 18.82 478.0 17.32 439.9
9164 14.19 360.4 13.31 338.1 18.19 462.0 17.39 441.7 248 11.16 283.5 10.16 258.1 16.61 421.9 15.18 385.6 352 12.54 318.5 11.34 288.0 20.16 512.1 18.66 474.0
9180 18.00 457.2 17.00 431.8 22.12 561.8 21.62 549.1 250 11.55 293.4 10.55 268.0 17.40 442.0 15.70 398.8 356 13.43 341.1 12.13 308.1 21.73 551.9 20.13 511.3
E51
7405 1.47 1.34 2.80 2.63 7411 2.93 2.64 5.04 4.75
37.3 34.0 71.1 66.8 74.4 67.1 128.0 120.7
7406 1.72 1.54 3.19 3.00 7412 3.19 2.84 5.43 5.13
43.7 39.1 81.0 76.2 81.0 72.1 137.9 130.3
7407 1.93 1.73 3.58 3.38 7413 3.50 3.03 5.83 5.50
49.0 43.9 90.9 85.9 88.9 77.0 148.1 139.7
7408 2.19 1.97 3.94 3.69 7414 3.69 3.31 6.54 6.13
55.6 50.0 100.1 93.7 93.7 84.1 166.1 155.7
7409 2.44 2.17 4.33 4.00 7415 3.93 3.50 6.93 6.44
62.0 55.1 110.0 101.6 99.8 88.9 176.0 163.6
7410 2.69 2.44 4.65 4.38 7416 4.13 3.70 7.32 6.81
68.3 62.0 118.1 111.3 104.9 94.0 185.9 173.0
7418 4.69 4.25 8.15 7.75
119.1 108.0 207.0 196.9
7420 5.17 4.72 9.21 8.79
131.3 119.9 233.9 223.3
S S
H H Mechani-Seal KL, KLD, KLLTypes
Basic housing shoulder
Bearing diameter,H
Number max. min.
in. mm in. mm
E52
1
Bearing bore tolerance:⁄2" - 2 3⁄16" = nominal to +.0005", +.013mm;
2 1⁄4" - 3 3⁄16" = nominal to +.0006", +.015mm;
3 7⁄16" - 315⁄16" = nominal to +.0007", +.018mm.
Recommended shaft tolerances: 1⁄2" - 1 15⁄16" = nominal to -.0005", - .013mm;
2" - 3 15⁄16" = nominal to -.0010", - .025mm.