Professional Documents
Culture Documents
ACS800 HINT AGDR Backward Compatibility
ACS800 HINT AGDR Backward Compatibility
1. Introduction
There are three diffrerent versions of the AGDR-gate driver board available for ACS800
inverter modules: AGDR-6X, AGDR-7X and AGDR-8x.
Due to various differences between these types, certain restrictions and
recommendations apply depending on the drive and the type of the AGDR being
replaced. These guidelines are described below for each case concerned.
Note. AGDR-7X and AGDR-8X are fully compatible, so mixing AGDR-7X with AGDR-
8X in same module is allowed.
2. ACS800, ACS550: R7
3. ACS800, ACS550: R8
Old AGDR/IGBT Replacement
AGDR-61C AGDR-61C
AGDR-62C AGDR-62C
AGDR-66C AGDR-66C
Note. In case all three AGDR´s are changed then replacement can be done with any
AGDR type. (AGDR-6X, AGDR-7X and AGDR-8x.)
Old AGDR/IGBT Replacement
AGDR-71C AGDR-71C
AGDR-81C
AGDR-72C AGDR-72C
AGDR-82C
AGDR-76C AGDR-76C
AGDR-86C
4. ACS800: R7i
Old AGDR/IGBT Replacement
AGDR-61C (not recommended)
AGDR-61C/AGDR-71C AGDR-71C
AGDR-81C
AGDR-62C (not recommended)
AGDR-62C/AGDR-72C AGDR-72C
AGDR-82C
AGDR-66C (not recommended)
AGDR-66C/AGDR-76C AGDR-76C
AGDR-86C
5. ACS800: R8i
Old AGDR/IGBT Replacement
AGDR-61C AGDR-61C
AGDR-62C AGDR-62C
AGDR-66C AGDR-66C