Professional Documents
Culture Documents
Toddlers Rocking Scottie
Toddlers Rocking Scottie
Rocking Scottie
All parts designed to be made
with common materials found in
Home Improvement stores.
FULL-SIZE
WOOD TOY
PLAN SET
It’s all quick and easy to make with
no fancy joints or cuts. Build it using
common tools and with easy to find
materials and supplies.
ToymakingPlans.com © 2020
Toddler’s
ROCKING SCOTTIE
2 ToymakingPlans.com © 2020
Toddler’s
Rocking Scottie
Warning: Read before copying.
The unauthorized reproduction or
distribution of this copyrighted work is
illegal. Criminal copyright infringement
including infringement without
monetary gain, is investigated by the
FBI and is punishable by up to 5 years
in federal prison and a fine of $250,000.
This color painted wood toy can be built with danish plywood,
hardwoods, softwoods or MDF. The finish is spray can Krylon or Rust-
Oleum. Spray 2 coats of primer sanding each coat with 220 sandpaper
when dry. Then spray 3 coats of color sanding with 400 sandpaper
when dry. Apply final coat without sanding. All Krylon and Rust-Oleum
paints and finishes are non-toxic when dry.
4 ToymakingPlans.com © 2020
Toddler’s
ROCKING SCOTTIE
ToymakingPlans.com © 2020 5
Toddler’s
ROCKING SCOTTIE
This clear-coated wood toy can be built with danish plywood,
hardwoods, softwoods or MDF. The finish is spray can Krylon or
Rust-Oleum clear gloss. Spray 2 thin coats sanding each coat
with 220 sandpaper when dry. Then spray 3 light final coats of
clear, sanding with 400 sandpaper when dry. Apply final coat
without sanding. All Krylon and Rust-Oleum paints and finishes
are non-toxic when dry.
SHOWN SMALLER
THAN ACTUAL SIZE
6 ToymakingPlans.com © 2020
Toddler’s
ROCKING SCOTTIE
This clear-coated wood toy can be built with danish plywood,
hardwoods, softwoods or MDF. The finish is spray can Krylon or
Rust-Oleum clear gloss. Spray 2 thin coats sanding each coat
with 220 sandpaper when dry. Then spray 3 light final coats of
clear, sanding with 400 sandpaper when dry. Apply final coat
without sanding. All Krylon and Rust-Oleum paints and finishes
are non-toxic when dry.
SHOWN SMALLER
THAN ACTUAL SIZE
ToymakingPlans.com © 2020 7
Toddler’s
ROCKING SCOTTIE
This clear-coated wood toy can be built with danish plywood, hardwoods, softwoods or MDF. The finish is spray
can Krylon or Rust-Oleum clear gloss. Spray 2 thin coats sanding each coat with 220 sandpaper when dry.
Then spray 3 light final coats of clear, sanding with 400 sandpaper when dry. Apply final coat without sanding.
All Krylon and Rust-Oleum paints and finishes are non-toxic when dry.
SHOWN SMALLER
THAN ACTUAL SIZE
8 ToymakingPlans.com © 2020
Toddler’s
ROCKING SCOTTIE
This clear-coated wood toy can be built with danish
plywood, hardwoods, softwoods or MDF. The finish
is spray can Krylon or Rust-Oleum clear gloss. Spray
2 thin coats sanding each coat with 220 sandpaper
when dry. Then spray 3 light final coats of clear,
sanding with 400 sandpaper when dry. Apply final
coat without sanding. All Krylon and Rust-Oleum
paints and finishes are non-toxic when dry.
SHOWN SMALLER
THAN ACTUAL SIZE
ToymakingPlans.com © 2020 9
Toddler’s
ROCKING SCOTTIE Toddler’s Rocking Scottie Patterns Index
page 26 page 27
7
page 5
14-16 A B C A 3
4
B C
page 28
Top Plan View
page 29
page 31
page 30
page
17-19 D E F D E F
page 32
page
20-22
G H I G page 33 H 1
page
Side Plan View
23-25
J K L
Parts List
1
. 1-1/2” x 8-3/4” x 9” make 1
2. 1-1/2” x 2-3/8” x 2-3/4” make 1
3. 1/2” diameter x 2-3/8” make 14
4. 1-1/2” x 7-3/4” x 7-7/8” make 2
5. 1-1/2” x 7-3/4” x 15-3/4” make 1
6. 1” diameter x 8-3/4” make 1
7. 1-1/2” x 3-3/8” x 23-3/4” make 2
10 ToymakingPlans.com © 2020
TODDLERS ROCKING SCOTTIE EXPLODED VIEW Toddler’s
3 3 ROCKING SCOTTIE
3
3
3 5
3
4
3
7
3
ToymakingPlans.com © 2020 11
Toddler’s TODDLERS ROCKING SCOTTIE ASSEMBLY STEPS
ROCKING SCOTTIE Drill Do not drill holes for Part 1
into head until Step 3.
legs.
3
Do not drill 5
5
into legs. 5
3
5
4
Drill 4
into 4
4
legs. 1 1
scrap wood
supports
Step 1: clamp. Step 2: Step 3: Step 4:
Using pages 14-25 as a guide, clamp Remove clamps. Dowel pin holes in Using pages 14-25 as a guide, glue Using pages 14-25 as a guide, glue
(no glue) two Part 4’s to Part 5 then legs Part 4 now align perfectly with the and clamp Part 1 to Part 5. Let glue two dowel pins Part 3 through Part 5
drill four 1/2” dia x 2-3/8” deep holes dowel pin holes in the body Part 5. Legs dry thoroughly then drill two 1/2” dia x and into Part 1. Let glue dry before
into two Part 4’s using Part 5 holes as are glued in place in Step 5. 2-3/8” deep holes into Part 1 using Part proceeding.
a guide. Do not drill two Part 1 head 5 pattern holes as a guide.
holes.
3
3
2 3 6
1
5 5
4
4
7
4
4
3
3
7 4
4
7
Step 5: Step 6: 3
Using pages 14-25 as a guide, glue Using pages 14-25 as a guide, glue
and clamp two Part 4’s with four dowel and clamp two Part 7’s to two Part 4’s.
Step 7:
pins Part 3 inserted through Part 5 and Leave clamps in place until glue is dry.
into two Part 4’s. Leave clamps in place Glue and clamp Part 2 to Part 5. Let Drill eight 1/2” dia x 2-3/8” holes through Part 7 holes and into Part 4’s. Glue eight
until glue is dry. glue dry before proceeding. dowel pins Part 3 inserted through Part 7’s and into two Part 4’s. Let glue dry. Insert
and glue Part 6 through head Part 1 and centered in head Part 1 with equal lengths
protruding on each side of Part 1.
12 ToymakingPlans.com © 2020
Toddler’s
ROCKING SCOTTIE
ToymakingPlans.com © 2020 13
Toddler’s
ROCKING SCOTTIE
0 printer scale 1 2 3
ACTUAL SIZE
A
A B C
D E F
Toddler’s Rocking Scottie
G H I PLAN VIEW 5
3
J K L
ATTENTION: TIP:
THESE FULL-SIZE PLAN To print paper plan views and patterns from your
VIEWS ARE FOR ASSEMBLY computer only print pages 14-33 landscape mode.
REFERENCE. INDIVIDUAL Pages are printed in black to conserve ink. Check 3
PATTERNS ON PAGES 26-33. printer printed size accuracy by measuring the printer
scale on each pattern with a ruler. If printed size is not
100% adjust printer settings.
ToymakingPlans.com © 2020
14
Toddler’s ROCKING SCOTTIE
0 printer scale 1 2 3
ACTUAL SIZE
5
B
A B C TIP:
To print paper plan views and patterns from your
computer only print pages 14-33 landscape mode.
Pages are printed in black to conserve ink. Check
printer printed size accuracy by measuring the printer
D E F scale on each pattern with a ruler. If printed size is not
3 100% adjust printer settings.
G H I ATTENTION:
THESE FULL-SIZE PLAN
VIEWS ARE FOR ASSEMBLY
REFERENCE. INDIVIDUAL
PATTERNS ON PAGES 26-33.
J K L
ToymakingPlans.com © 2020
15
Toddler’s
ROCKING SCOTTIE 0 printer scale 1 2 3
ACTUAL SIZE
4
5
C A
D
B
E
C
F
3
G H I
2
J K L
ATTENTION: TIP:
THESE FULL-SIZE PLAN To print paper plan views and patterns from your
VIEWS ARE FOR ASSEMBLY computer only print pages 14-33 landscape mode.
REFERENCE. INDIVIDUAL Pages are printed in black to conserve ink. Check
PATTERNS ON PAGES 26-33. printer printed size accuracy by measuring the printer
scale on each pattern with a ruler. If printed size is not
3
100% adjust printer settings.
16 ToymakingPlans.com © 2020
Toddler’s
ROCKING SCOTTIE
0 printer scale 1 2 3
ACTUAL SIZE
TIP:
To print paper plan views and patterns from your
A B C computer only print pages 14-33 landscape mode.
Pages are printed in black to conserve ink. Check
printer printed size accuracy by measuring the printer
scale on each pattern with a ruler. If printed size is not
100% adjust printer settings.
D E F
ATTENTION:
3
THESE FULL-SIZE PLAN
G H I VIEWS ARE FOR ASSEMBLY
REFERENCE. INDIVIDUAL 1
PATTERNS ON PAGES 26-33.
J K L
ToymakingPlans.com © 2020 17
Toddler’s
ROCKING SCOTTIE
0 printer scale 1 2 3
ACTUAL SIZE
E A B C
TIP:
D E F
To print paper plan views and patterns from your
computer only print pages 14-33 landscape mode.
Pages are printed in black to conserve ink. Check
printer printed size accuracy by measuring the printer G H I
scale on each pattern with a ruler. If printed size is not
100% adjust printer settings.
ATTENTION:
THESE FULL-SIZE PLAN
J K L
VIEWS ARE FOR ASSEMBLY
REFERENCE. INDIVIDUAL
PATTERNS ON PAGES 26-33.
18 ToymakingPlans.com © 2020
Toddler’s
ROCKING SCOTTIE
0 printer scale 1 2 3
ACTUAL SIZE
3
Toddler’s Rocking Scottie
PLAN VIEW
TIP:
F A B C
ATTENTION:
THESE FULL-SIZE PLAN
VIEWS ARE FOR ASSEMBLY J K L
REFERENCE. INDIVIDUAL
PATTERNS ON PAGES 26-33.
ToymakingPlans.com © 2020 19
Toddler’s
ROCKING SCOTTIE
0 printer scale 1 2 3
ACTUAL SIZE
G
PLAN VIEW
1
A B C
TIP:
To print paper plan views and 3
D E F patterns from your computer
only print pages 14-33
landscape mode. Pages are
printed in black to conserve ink.
G H I Check printer printed size
accuracy by measuring the
printer scale on each pattern 5
with a ruler. If printed size is not
100% adjust printer settings.
J K L
ATTENTION:
THESE FULL-SIZE PLAN
VIEWS ARE FOR ASSEMBLY 3
REFERENCE. INDIVIDUAL
PATTERNS ON PAGES 26-33.
ToymakingPlans.com © 2020
20
Toddler’s
0 printer scale 1 2 3 ROCKING SCOTTIE
ACTUAL SIZE
H
A B C
1
D E F
TIP:
To print paper plan views and patterns from your
computer only print pages 14-33 landscape mode. G H I
Pages are printed in black to conserve ink. Check
printer printed size accuracy by measuring the printer
scale on each pattern with a ruler. If printed size is not
100% adjust printer settings.
J K L
ATTENTION:
THESE FULL-SIZE PLAN
VIEWS ARE FOR ASSEMBLY
3 REFERENCE. INDIVIDUAL
PATTERNS ON PAGES 26-33.
ToymakingPlans.com © 2020
21
Toddler’s
ROCKING SCOTTIE
0 printer scale 1 2 3
ACTUAL SIZE
TIP:
To print paper plan views and patterns
from your computer only print pages
I A B C
ATTENTION:
THESE FULL-SIZE PLAN
VIEWS ARE FOR ASSEMBLY J K L
REFERENCE. INDIVIDUAL
PATTERNS ON PAGES 26-33.
ToymakingPlans.com © 2020
22
Toddler’s
0 printer scale 1 2 3 ROCKING SCOTTIE
ACTUAL SIZE
A B C
G
E
H
F
I
J
Toddler’s Rocking Scottie 4
PLAN VIEW
J K L
TIP:
3
To print paper plan views and patterns
from your computer only print pages 14-33
landscape mode. Pages are printed in black
to conserve ink. Check printer printed size 3
accuracy by measuring the printer scale on
each pattern with a ruler. If printed size is not
100% adjust printer settings.
ATTENTION:
THESE FULL-SIZE PLAN
VIEWS ARE FOR ASSEMBLY
REFERENCE. INDIVIDUAL
PATTERNS ON PAGES 26-33.
ToymakingPlans.com © 2015
23
0 printer scale 1 2 3
Toddler’s ACTUAL SIZE
ROCKING SCOTTIE
K
A B C
TIP:
To print paper plan views and patterns from your
D E F computer only print pages 14-33 landscape mode.
Pages are printed in black to conserve ink. Check
printer printed size accuracy by measuring the printer
scale on each pattern with a ruler. If printed size is not
G H I 100% adjust printer settings.
ATTENTION:
THESE FULL-SIZE PLAN
VIEWS ARE FOR ASSEMBLY
J K L REFERENCE. INDIVIDUAL
PATTERNS ON PAGES 26-33.
24 ToymakingPlans.com © 2020
Toddler’s
ROCKING PONY
0 printer scale 1 2 3
ACTUAL SIZE
A B C
4
L
Toddler’s Rocking Scottie
D E F
G H I
PLAN VIEW
J K L
3
TIP:
To print paper plan views and patterns from your
computer only print pages 14-33 landscape mode.
3
Pages are printed in black to conserve ink. Check
printer printed size accuracy by measuring the printer
scale on each pattern with a ruler. If printed size is not
100% adjust printer settings.
ATTENTION:
THESE FULL-SIZE PLAN
VIEWS ARE FOR ASSEMBLY
REFERENCE. INDIVIDUAL
PATTERNS ON PAGES 26-33.
ToymakingPlans.com © 2020 25
Toddler’s
ROCKING SCOTTIE 0 printer scale 1 2 3
PATTERNS
ACTUAL SIZE
A B C
D E F
A
G H
TIP:
To print paper plan views
and patterns from your
7 7 computer only print pages
3
14-33 landscape mode.
7. 1-1/2” x 3-3/8” x 23-3/4” Pages are printed in black
make 2
to conserve ink. Check
printer printed size
accuracy by measuring
the printer scale on each
Drill 1/2” pattern with a ruler. If
HOLE THRU printed size is not 100%
(2 Places) adjust printer settings.
ToymakingPlans.com © 2020
26
PATTERNS 0 printer scale 1 2 3
Toddler’s
ROCKING SCOTTIE
ACTUAL SIZE
Drill 1/2”
with 7/8” DEPTH
(4 Places)
4
B
Drill 1/2” IMPORTANT: Read page 12 Assembly
with 7/8” Instructions before drilling holes.
DEPTH
4 4
TIP:
To print paper plan views and patterns from your
computer only print pages 14-33 landscape mode.
Pages are printed in black to conserve ink. Check
printer printed size accuracy by measuring the
printer scale on each pattern with a ruler. If printed
size is not 100% adjust printer settings.
ToymakingPlans.com © 2020
27
Toddler’s
ROCKING SCOTTIE
PATTERNS
C
5 5
0 printer scale 1 2 3
ACTUAL SIZE
TIP:
To print paper plan views and patterns from your computer
only print pages 14-33 landscape mode. Pages are printed in
black to conserve ink. Check printer printed size accuracy
by measuring the printer scale on each pattern with a ruler. If
printed size is not 100% adjust printer settings.
ToymakingPlans.com © 2020
28
PATTERNS Toddler’s
ROCKING SCOTTIE
0 printer scale 1 2 3
ACTUAL SIZE
TIP:
To print paper plan views and patterns
from your computer only print pages 14-33
D
landscape mode. Pages are printed in black
to conserve ink. Check printer printed size
accuracy by measuring the printer scale on
each pattern with a ruler. If printed size is not
100% adjust printer settings.
7 7
D E F
G H
ToymakingPlans.com © 2020
29
0 printer scale 1
ACTUAL SIZE
2 3 PATTERNS
4
Drill 1/2” 4. 1-1/2” x 7-3/4” x 7-7/8”
with 7/8” make 2
DEPTH
A B C
E D E F
G H
1. 1-1/2” x 8-3/4” x 9”
make 1
TIP:
To print paper plan views and patterns Drill 3/4”
from your computer only print pages 14-33 HOLE THRU
landscape mode. Pages are printed in black
to conserve ink. Check printer printed size
accuracy by measuring the printer scale on IMPORTANT: Drill eyehole
before assembly.
each pattern with a ruler. If printed size is not
100% adjust printer settings.
30 ToymakingPlans.com © 2020
Toddler’s
ROCKING SCOTTIE
PATTERNS
0 printer scale 1 2 3
ACTUAL SIZE
TIP:
F
To print paper plan views and patterns
from your computer only print pages 14-33
landscape mode. Pages are printed in black
to conserve ink. Check printer printed size
accuracy by measuring the printer scale on
each pattern with a ruler. If printed size is not
100% adjust printer settings.
5 5
ToymakingPlans.com © 2020
31
PATTERNS
Toddler’s
ROCKING SCOTTIE Drill 1/2”
HOLE THRU 0 printer scale 1 2 3
(2 Places) ACTUAL SIZE
32 ToymakingPlans.com © 2020
PATTERNS
0 printer scale 1 2 3 Toddler’s
ACTUAL SIZE ROCKING SCOTTIE
Drill 1”
HOLE THRU IMPORTANT: Drill
handle hole before
assembly.
H
1
1. 1-1/2” x 8-3/4” x 9”
make 1
TIP:
To print paper plan views and patterns from your computer
only print pages 14-33 landscape mode. Pages are printed in
black to conserve ink. Check printer printed size accuracy
by measuring the printer scale on each pattern with a ruler. If
printed size is not 100% adjust printer settings.
Drill 1/2”
with 7/8” 1
6. 1” diameter x 8-3/4”
make 1
ToymakingPlans.com © 2020
33
Toddler’s
ROCKING SCOTTIE
ToymakingPlans.com © 2020 35
Toddler’s
BOX LABEL ROCKING SCOTTIE