Professional Documents
Culture Documents
i-PROG Manual (Eng)
i-PROG Manual (Eng)
X▝
Ⅰ. Information of Components
1. Basic Components ··················································································· 1
2. Optional Components ············································································· 3
Ⅲ. Reset
1. Way of Searching models ······································································· 9
2. Operation Options ···················································································· 11
3. RESET ········································································································· 13
Ⅳ. Additional Functions
1. Inspection ·································································································· 15
2. Operation History ····················································································· 16
3. Data Trasfer ······························································································ 17
Ⅴ. Settings
1. Language, Volume, Date and Time ···················································· 18
2. Credit Charging ························································································ 19
3. i-PROG Upgrade ····················································································· 19
4. Device Information ················································································ 19
I. Information of Components
1. Basic Components
- 1 -
CLT-407, CLT-409 , DELL-1230, Founder-C3000
JIG No.4
CRG-322(LBP-9600),HP-P1005/P1505/P1007/P1102/P1566/P2035/
P3015/P4015,HP-M4550,HP-CP1025/CP1215M/CP1525/CP2025/
CP3525/CP4525/CP5225/CP5525,HP-CM4540/ENTERPRISE700/
M775/LBP9600/CRG-322(LBP-9600),HP-PRO200/PRO300/PRO400/PRO-500...
JIG No.6
Connect i-PROG with Computer when using manager program for upgrade,
online credit charging and so on.
USB Cable
Adaptor
- 2 -
2. Optional Components
Jig No.05
- 3 -
CLP-510, HS-511, Phaser-6100
Jig No.8
CLP-600
Jig No.9
Jig No.10
Jig No.11
DP-2065/3055, YJ-526
Jig No.13
DC-C400 D/R, DC-C450 D/R, DP-C4350 D/R, DP-C3540 D/R, Phaser-7700 D/R,
Phaser-7750 D/R, Phaser-7760 D/R, Lexmark X935/945 D/R
Jig No.14
- 4 -
ML-8200/8300, ML-8550, ML-8700, PR-3200, PR-3260, HS-2050, HS-2300,
HS-2650, HS-3210, HS-3270 , MultiWriter-2300
Jig No.15
Jig No.16
Jig No.17
SCX-6555 D/R
Jig No.18
Jig No.19
MLT-307 D/R
Jig No.20
DocuPrint-C2250/C3350/C3360/C4000/C5000/C5005/CM505
DocuCentre-IV 2056/2060/2260/2270/4070/4430/6080
WorkCentre-5019/5325/7120/7425/7525, DocuPrint-CP105
Dell-C1760, C1660, C3760, EPSON Aculaser-C1700, M200, M300, M400...
Jig No.22
- 5 -
SLX-8380 D/R, SLX-8385 D/R
Jig No.24
SINDORICOH-A603
LEXMARK-MS310/410/510/710, MX310/710/711
Jig No.25
- 6 -
II. Name of each part, and way of connection
1. Detail name
i-PROG at a glance
• Search
• Power
• Start(Proceed)
• Back
- 7 -
2. How to connect
Connect a Jig cable to the device when you work with contact
type chips.
- 8 -
Ⅲ. Reset
1) Main Screen
When credit insterted, this icon will be shown.
The figures on right side indicate remained credit.
Main Menue
1. RESET(need to insert credit)
2. Additional functions(No need to insert credit)
3.Settings(No need to insert credit)
Put a jig on a chip (In case of RFID chip, place it on the antena)
with the main screen on. If you click search button ( button
on main body), it is available for searching model without
selecting menu. Reset A is the simplest method. However,
since there are limitations for some models, please read notices
before you use it.
- 9 -
★ Notice 1.
If you search or reset with different model number for RFID-LF series chips from the
below box, chip data can be damaged because of chip features. With this issue,
i-PROG does not support automatic search function(Search A).
--> To avoid any problem for these series chips, DO NOT search your chip from the
main page. Instead, please search with exact model number (Reset B) or enter into the
exact series.
After searching for the typical model what you look for in order to reset, proceed with the model
search on series search display.
★ Notice 2.
IF or below listed chips, it will be locked if you attempt to reset or search with wrong
model no more than 7~8 times. If a chip is locked, it will not be possible to reset or
search again. Many models are in similar or same shape but the data can be different
for each model. If you don't know the exact
model, we recommend you to use automatic search(Reset A) to avoid any trouble from
direct model selection (Reset B)
- 10 -
1-2) Way of searching models “B”.
2. Operation Options
- 11 -
*Mandatory operational option: Please tap arrow
next to 'reset' box to open it.
a. RESET : Resetting chip. Depending on diffrence betrween original and compatible, models available is
different. Please check supported model for details of the supported model information.
Credit will be reduced to operate.
b. Information : In current status of the chip, it is available to modify Change contents including country,
color, capacity and so on. This serveice is not available for original chips, and even
for the compatible chips, supported models and conditions to change are limited.
Credit will NOT be reduced to operate. Basically, only new chips(unused) are
avaiable for changing information.
c. Upgrade : Upgrade the Firmware of chip to the lastest one. When you reset, upgrading is done at
the same time, so for the resetted chip, this work is not needed additionally.
Credit will NOT be reduced to operate.
d. Data Read : In order to check data if the chip is abnormal, or to send data for development, read
the data of a chip. Data read from this function, is available for transferring to sever
and checking in 'Additional function> Data transfer'. Credit will NOT be reduced to operate.
ㆍAuto Mode : Continue to work with the current settings After selecting check
box and clicking Start button, it operates. For disabling, please
check box button or change options.
ㆍAuto Region : Modify *Auto-Region as' On' or 'Off' on the chip.
ㆍExternal Antenna : Choose to work with external antenna, not with internal one inside the
device. It is convenient for resetting chip attached to the catridge.
*Auto Region - When a chip is not recognized due to regional version, without
needing to change the chip or to change regional information in
i-PROG, version can be changed by on and off of power of the
printer. This function makes chips to change regional version in
order of DOM > EXP > EUR >CHN until it finds the mathing version.
(Available for some Samsung Series of Chips only)
- 12 -
3. RESET
1) RESET
<Reset completed>
- 13 -
2) nformation Change
Basic procedure is same with Reset and as the following process, click the arrow next to current chip
information and select parts to be modified.
< Select Option > < Select region > < Select color >
3) Upgrade
4) Data Read
- 14 -
Ⅳ. Additional Functions
1. Inspection
If you sellect 'Additional Functions' from the main screen, the screen on right side below
will be shown.
'Verify wheter the data of chips are correct. Data in various chips can be inspected
without testing by a printer. Through the three ways of model searching (Recent work,
Model, Brand) as the same process with 'Reset, sellect model to inspect. Then press
'START' button.
- 15 -
2. Operation History
If you sellect 'Additional Functions' from the main screen, the screen on right side below
will be shown.
iThrough i-PROG, it is available for checking the entire history of works. In order of
recent work, it is available for checking the entire history of work and statistically by
period(monthly/daily) and by work(Reset, Information Change upgrade and Inspection).
In case of statistical inquiry, operated number is calculated and displayed for each same
model.
◀ Inquiry Complete
◀ Statistics by period
◀ Statistics by work
- 16 -
3. Data Trasfer
If you sellect 'Additional Functions' from the main screen, the screen on right side below
will be shown.
Trasfer the data read from 'Reset' to server(This function is also available with
i-PROG manager.) To transfer, Internet LAN should be connected to 'LAN" of back of main body.
If clicking 'Transfer' key next to data not transmitted (expressed with N), the following
window shows up. If clicking 'Yes', transfer is proceeeded and after the completion, the
message of ''transfer completed'
shows up.
- 17 -
Ⅴ. Settings
1) Language : Please sellect a language to be set. 2) Volume : Please control the volume.
① Date
② Time
- 18 -
2. Credit Charging
3. i-PROG Upgrade
4. Device Information
- 19 -