Professional Documents
Culture Documents
CR 0701 Ref
CR 0701 Ref
CR 0701 Ref
References
1. Nelik, L., Pumps, Kirk-Othmer Encyclopedia of Chemical Technology, Vol. 4, 4th ed,
John Wiley & Sons, New York, 1996.
2. Hydraulic Institute, Hydraulic Institute Standards for Centrifugal, Rotary & Recip-
rocating Pumps, Parsippany, NJ, 1994.
3. Russell, G. Hydraulics, 5th ed., Henry Holt and Company, New York, 1942.
4. Stepanoff, A. J. Centrifugal and Rotary Pumps, 2nd ed., John Wiley & Sons, New
York, 1948.
5. Shigley, J. and Mischke, C., Gears, Mechanical Engineering Design, 5th ed.,
McGraw-Hill, New York, 1989.
6. Avallone, E., Hydrodynamics Bearings, in Marks’ Handbook for Mechanical Engi-
neers, Section 8, 9th ed., McGraw-Hill, New York, 1986.
7. Budris, A., Preventing Cavitation in Rotary Gear Pumps, Chemical Engineering, May
5, 1980.
8. SKF, SKF General Catalog No. 4000US (Bearings), King of Prussia, PA, 1991.
9. Luer, K. and Marder, A., Wear Resistant Materials for Boiler Feed Pump Internal
Seals, Advances in Steam Turbine Technology for Power Generation,ASME Reprint
from PWR Book No. G00518, Vol. 10, 1990.
10. Nelik, L., Positive Displacement Pumps, paper presented at the Texas A&M 15th Int.
Pump Users Symp., section on Screw Pumps by J. Brennan, Houston, March, 1998.
11. Dillon, M. and Vullings, K., Applying the NPSHR Standard to Progressing Cavity
Pumps, Pumps and Systems, 1995.
12. Bourke, J., Pumping Abrasive Liquids with Progressing Cavity Pumps, J. Paint Tech.,
Vol. 46, Federation of Societies for Paint Technologies, Philadelphia, PA, August,
1974.
13. Platt, R., Pump Selection: Progressing Cavity, Pumps and Systems, August, 1995.
14. Nelik, L., Progressing Cavity Pumps, Downhole Pumps, and Mudmotors: Geometry
and Fundamentals (in press).
15. Schlichting, H., Boundary-Layer Theory, 7th ed., McGraw-Hill, New York, 1979.
16. Heald, C., Cameron Hydraulic Data, 18th ed., Ingersoll-Dresser Pumps, Liberty
Corner, NJ, 1996.
17. The Sealing Technology Guidebook, 9th ed., Durametallic Corp., Kalamazoo, MI,
1991.
18. Specification for Horizontal End Suction Centrifugal Pumps for Chemical Process,
ANSI/ASME B73.1M-1991 Standard, ASME, New York, 1991.
19. Block, H., Process Plant Machinery, Butterworth & Co. Publishers Ltd., Kent, U.K.,
1989.
20. Karassik, I., et al., Pumps Handbook, McGraw-Hill, New York, 1976.
21. Cholet, H., The Progressing Cavity Pumps, Editions Technip, France, 1996.
0-8493-????-?/97/$0.00+$.50
© 1997 by CRC Press LLC