The document contains G-code instructions for machining a part using a 6mm end mill. It includes:
- Pocket milling along the X and Y axes in incremental depths from 2.222mm to 20mm.
- Rapid moves between pocket locations across the top face of the part material.
- The toolpath is completed in multiple sequential sections moving across the face.
The document contains G-code instructions for machining a part using a 6mm end mill. It includes:
- Pocket milling along the X and Y axes in incremental depths from 2.222mm to 20mm.
- Rapid moves between pocket locations across the top face of the part material.
- The toolpath is completed in multiple sequential sections moving across the face.
The document contains G-code instructions for machining a part using a 6mm end mill. It includes:
- Pocket milling along the X and Y axes in incremental depths from 2.222mm to 20mm.
- Rapid moves between pocket locations across the top face of the part material.
- The toolpath is completed in multiple sequential sections moving across the face.