Setup disk information

----------------------
Flow Computer
Setup software version 04.40.00
File : D:\ARCHIV~1\FC1VER4\DEFAULT.FC1
: * Modified but not saved to disk
Monday, April 5, 2021
14:14:52
Administrative
--------------
Operator Code 0
System Parameters:
------------------
Instrument Rate/Totalizer
Flow Equation Volume
Indicators:
-----------
Basic units
Volume unit gal
Mass unit kg
Temperature Deg_°F
Decimal places
Total 0
Rate 1
Temperature 1
Density 3
Rate
Time Base /min
Descriptor RATE
Unit label gal /min
Rate averaging filter 0
% Quick Change 1 %
Totalizer
Descriptor TOTAL
Unit label gal
Density
Descriptor DENS
Unit label kg / gal
Temperature
Descriptor TEMP
Unit label °F

Flow Input:
-----------
Flowmeter Type SQRLAW W/O SQRT
Flow input Analog, 4-20 mA
DC Output 24 VDC
Low Scale 0 gal /min
Full Scale 3600 gal /min
Low Flow Cutoff 5 gal /min
Low Flow rate alarm 0 gal /min
High Flow rate alarm 3700 gal /min
Fluid Data:
-----------
Ref Density 1 kg / gal
Ref Temperature 60 °F
Calibration Density 3,0168 kg / gal
Other Input Channel
---------------------
Input Signal NOT ASSIGNED
Pulse Output :
--------------
Assign Pulse Output OFF/NOT USED
Current Output
------------------
Assign Current Out VOLUME FLOW
Current Range 4 - 20 mA
Low Scale 0 gal /min
Full Scale 3600 gal /min
Time Constant 0
System Relay 1 :
----------------
Relay Function NOT ASSIGNED
Relay Mode HI ALARM, FOLLOW
System Relay 2 :
----------------
Relay Function NOT ASSIGNED
Relay Mode HI ALARM, FOLLOW

System Relay 3 :
----------------
Relay Function NOT ASSIGNED
Relay Mode HI ALARM, FOLLOW
System Relay 4 :
----------------
Relay Function NOT ASSIGNED
Relay Mode HI ALARM, FOLLOW
Control Input
--------------
Control input 1 Not Assigned
Control input 2 Not Assigned
Control input 3 Print
System Communication :
----------------------
Device ID d01
Baud Rate 9600
Parity NONE
Handshake NONE
Serial Hardware RS232
Modem Setup :
-------------
Enable Modem Control No
Datalog/Print
-------------
Print Interval 00:00:00
Print Time 00:00:00
Enable Print Key Yes
Enable Clear Total No
Enable Datalog Only No
Output Format Printer
Page Length 0
Top Margin 3