Professional Documents
Culture Documents
HH52, HH53, HH54 Series: Miniature Control Relays
HH52, HH53, HH54 Series: Miniature Control Relays
Features
• The products have obtained the CCC certification and can
satisfy the market demands.
• Standard products have been approved by UL, CSA and
TÜV.
• The series products are equipped with an operating
indicator (LED), ensuring a clear glance of work status.
• The products are environmentally friendly and conformed
to regulations on pollution control of electronic information HH52P-LC
products. HH53P-LC
HH54P-LC
Types
Contact Rated thermal Operating indicator Rated coil voltage *1 Type Applicable sockets
arrangement current (A) AC coil DC coil
2PDT 5 Not equipped AC110V DC24V HH52P-C TP58X1-C
Equipped AC220V DC48V HH52P-LC TP58X1-EC
3PDT 5 Not equipped HH53P-C TP511X1-C
Equipped HH53P-LC TP511X1-EC
4PDT 3 Not equipped HH54P-C TP514X1-C
Equipped HH54P-LC TP514X1-EC
*1 Please consult our company for the voltage specifications of other coils not mentioned in the above table
62E1-E-0086a
Specifications Electrical durability
Item Specifications Voltage Make Break Electrical life (million)
Rated insulation voltage 250V Current Power factor or Current Power factor or HH52P HH54P
Operating voltage AC 80% of the rated voltage (20°C) (A) time constant (A) time constant HH53P
DC 75% of the rated voltage (20°C) AC 200V 10 cosø=0.7 1 cosø= 0.4 0.08
Reset voltage AC 30% of the rated voltage (20°C) (Ind. load) 5 0.5 0.3 to 0.4 1 0.2
DC 10% of the rated voltage (20°C) 3 0.3 1.7 0.33
Maximum voltage 110% of the rated voltage 1 0.1 6 1.2
persistently applied AC 100V 10 cosø=0.7 1 cosø= 0.7 0.13
Range of operating -25 to +60°C (Ind. load) 5 0.5 0.3 to 0.4 1.5 0.28
temperature When 100% rated voltage is applied, no 3 0.3 2.8 0.5
condensation or icing is observed. 1 0.1 9 1.7
Dielectric strength The coil contacts and c contacts are AC2000V, 1 minute AC 200V 3 cosø=1 3 cosø=1 0.6 0.15
mutual voltage resistant. (Res. load) 1 1 2 0.5
Among the contact clearance AC1000V, 1 minute 0.3 0.3 8 2
Among the socket terminal AC2000V, 1 minute AC 100V 3 cosø=1 3 cosø=1 1 0.25
Insulation resistance Detected with a DC500V M meter; must be above (Res. load) 1 1 3.4 0.9
100MΩ 0.3 0.3 14 3.5
Operating time 20ms or less DC 100V 0.2 T=15ms 0.2 T=15ms 0.4 0.15
Reset time 20ms or less (Ind. load) 0.05 0.05 2.4 0.9
Vibration Malfunction 10 to 55 Hz, double amplitude 1mm DC 24V 1 T=15ms 1 T=15ms 0.5 0.15
Durability 10 to 55 Hz, double amplitude 1mm (Ind. load) 0.2 0.2 4 1.2
2 hours for each of X, Y and Z direction, 6 hours in all
DC 100V 0.5 T=0ms 0.5 T=0ms 0.6 0.15
Shock Malfunction 200m/s2 (Res. load) 0.1 0.1 5 1.2
Durability 1000m/s2, 3 times for each of X,Y and Z direction, 18 times in all.
DC 24V 3 T=0ms 3 T=0ms 0.4 0.1
Durability Mechanical AC ratings: 50 million operations (Res. load) 1 1 1.6 0.4
DC ratings: 100 million operations
0.2 0.2 14 3.5
Electrical Please refer to table below
Contact resistance 50mΩ or less (Before use)
Minimum applicable load 5V, 1mA
(reference value) *
Mass HH52P-LC: Approx. 32g
HH53P-LC: Approx. 33g
HH54P-LC: Approx. 33g
Note *: Reliability index λ60 =0.1×10-6/once
Referring to the minimum applicable load during the continual on-off when the relay
is installed in a clean electrical cabinet. But this does not apply to the minimum
applicable load during continual excitation work and etc.
5 5
HH
52
P,
3 3
H
HH
H5
Make and breaking operation (million)
HH
52
3P
2 2
54
P,
DC
H
P
H5
HH
HH
HH
DC
10
3P
52
52
52
10
0V
HH
P,
P,
P,
DC
0V
1 1
H
HH
H
54
48
H5
H5
H5
HH
P
54
V
3P
3P
3P
52
DC
P
HH
P,
DC
DC
DC
DC
48
0.5 0.5
H
HH
54
V
24
48
10
48
H5
P
54
V
V
0V
3P
DC
HH
P
DC
0.3 0.3
DC
10
54
0V
24
24
DC
V
V
0.2 0.2
24
V
0.1 0.1
Note1) On-off frequency: 1800 times/ hour
0.05 0.05 Power supply rate: 40%
0.03 0.03
Note 1) Default time constant T=15ms
0.02 2) On-off frequency: 1800 times/hour 0.02
Power supply rate 40%
0.01 0.01
0.02 0.03 0.05 0.1 0.2 0.3 0.5 1.0 2.0 5.0 10 0.02 0.03 0.05 0.1 0.2 0.3 0.5 1.0 2.0 3.0 5.0 10
3 3
Make and breaking operation (million)
HH H52
HH
52
2 2
54
P,
P
HH
HH H53
HH
AC
HH
52 H52
P,
53
54
10
54
H
P,
P
P
1 1
0V 00V
H
P
HH , HH
AC C20
HH
AC AC
AC
53
10
P
54
10
2
P
A
P
0V
P
0V 00V
AC
53
0V
10 C20
0.5 0.5
2
0V
A
0.3 0.3
0V
0.2 0.2
0.1 0.1
Note 1) Making current 10×In cosφ=0.7
Breaking current In cosφ=0.3 to 0.4
0.05 However, in the hidden line area 0.05
Note1) On-off frequency: 1800 times/ hour
Making current 5×In cosφ=0.7 Power supply rate: 40%
0.03 Breaking current In cosφ=0.3 to 0.4 0.03
2) On-off frequency: 1800 times/ hour
0.02 0.02
In hidden line area: 300 times/ hour
Power supply rate: 40%
0.01 0.01
0.02 0.03 0.05 0.1 0.2 0.3 0.5 1.0 2.0 3.0 5.0 10 0.02 0.03 0.05 0.1 0.2 0.3 0.5 1.0 2.0 3.0 5.0 10
Rated voltage (V) Coil voltage Rated current (mA) Coil resistance Coil inductance (H) Power consumption
(Ω) For armature dropout For armature pickup
DC24 DC24V 37 650 3.32 5.85 Approx. 0.9W
DC48 DC48V 18.8 2560 11.67 20.57
Standard
Type EC instruction Safety identification standard CCC certification
CE mark UL CSA GB
HH52P-C, HH52P-LC
HH53P-C, HH53P-LC m m m m
HH54P-C, HH54P-LC
m: Standard products shall abide by the above standards as well as the obtained certifications.
• CCC certification
Type Application type Rated operating voltage (V) Rated thermal current (A) Agreed heating current (A) Electrical durability (x104 )
HH52P-C, HH53P-C AC-12 (Res. load) 220 5 5 20
HH52P-LC, HH53P-LC AC-15 (Ind. load) 220 1
DC-12 (Res. load) 110 0.5
DC-13 (Ind. load) 110 0.2 10
AC-12 (Res. load) 240 5 20
DC-12 (Res. load) 30 5
HH54P-C AC-12 (Res. load) 220 3 3 10
HH54P-LC AC-15 (Ind. load) 220 0.3 20
DC-12 (Res. load) 110 0.5
DC-13 (Ind. load) 110 0.2 7
AC-12 (Res. load) 240 3 20
DC-12 (Res. load) 30 3
Dimensions, mm
Type Appearance, mass Dimensions, mm
HH52P-C 0.5
2.8
HH52P-LC
1.2
4 8 12 14
21
1 5 9
2.2
13
3 6 9 14
2 5 8
21
1 4 7
2.2
13
4 8 12 14
3 7 11
21
2 6 10
2.2
1 5 9 13
Internal wirings
Standard Equipped with an operating indicator
HH52P-C HH53P-C HH54P-C HH52P-LC HH53P-LC HH54P-LC
(+)
(+) (+) (+) (+) (+) 4 8 12 14
4 8 12 14 3 6 9 14 4 8 12 14 4 8 12 14 3 6 9 14
3 7 11
3 7 11
2 5 8 2 5 8 2 6 10
2 6 10
1 5 9 13
1 5 9 13 1 4 7 13 1 5 9 13 1 5 9 13 1 4 7 13 (-)
(-) (-) (-) (-) (-)
Sockets Approx. 79(height of rail is 15)
Approx. 71.5(height of rail is 7.5)
Type Appearance, mass Applicable relay Dimensions29(mm)
Approx. 39 15 Panel drilling (mm) Wiring diagrams
22
TP58X1-C 2−4x4.5 HH52P 21 Approx. 79(height of rail is 15)
Approx. 79(height of rail is 15)
Approx. 71.5(height of rail is 7.5)
6 10.5 Approx. 71.5(height of rail is 7.5)
(For the wiring of screws used 22 Approx. 39 29 15
4 1 2−4x4.5 22 Approx. 39 2921 15
for the groove rail installation) 2−4x4.5
6 4 1
6 2110.5
10.5
4 1
Terminal screw M3 4 1
8
4 1
45 1
8 5
8 5
59
8 5
59
8 5
825 25
59
5
69
25
* Standard products have
69
69
12 9 12 9
accompanied vibration 12 9 12 9
12 9 1214 13 9
resistant metal parts 14 13 23 (Min. installation
interval) 14 13
23 (Min. installation
14 13 14 13
13 Approx. 79(height of rail
15 is 15) 9
23 2-ø4(Min. installation
interval)
4.5
14 (M3-M4 tap hole for
Approx. 71.5(height15of railM3x8
is 7.5) 9 35mm IEC rail 2-ø4interval)
4.5
Screw with gasket screw installation)
Approx. 32g Approx. 39 29 M3x8 35mm IEC15 rail (M3-M4 tap hole for
22
15 9 Screw with gasket 2-ø4 screw installation)
4.5
(No.AF91-874)
2−4x4.5 21 Approx. 79(height of rail is 15)
6 10.535mm IEC rail
Approx. 71.5(height of (M3-M4
rail is 7.5) tap hole for
TP58X1-EC HH52P Approx. 79(height of rail is 15)
4 1M3x8 Screw with gasket 22 Approx. 71.5(height of screw
Approx. 39 29
rail is 7.2)installation)
15
With finger safety protection 2−4x4.5
6 Approx. 39
21
29 10.5 4 1
21
(For the wiring of screws used 2-4x4.5 22 4 1
6 10.5
8 4 1
5
for the groove rail installation) 8 5
59
Terminal Screw M3 8 5
59
8 5
25 25
69
69
69
12 9 12 9
12 9 1214 13 9
* Standard products have M3x8 14 13 23 (Min. installation
interval)
accompanied vibration 14 13
13 15 9 23 2-ø4(Min. installation
4.5
14
resistant metal parts. 9 35mm IEC rail
(M3-M4 tap hole for
interval)
Approx. 33g 15 M3x8 Screw with gasket screw installation)
4.5
35mm IEC rail
(No.KKD11-026) 15 9 2-ø4
4.5
6 5 4
6 5 4
59
69 25
* Standard products have
accompanied vibration
9 8 7
resistant metal parts 9 8 7
30 (Min installation
interval)
14 13
2-ø4 14 13
9 (M3-M4 tap holen for
15 screw installation)
Approx. 43g 35mm IEC rail
4.5
(No.KKD12-100)
TP511X1-EC HH53P Approx. 79(height of rails is 15)
With finger safety protection Approx. 71.5(height of rails is 7.5)
29 Approx. 39 29 22
(For the wiring of screws used 2−4×4.5
6
M3x11 21 3 2 1
10.5
for the groove rail installation) 6 5 4
Terminal Screw M3
25 59
69
25
5959
25
25
69
69
69
59
25 25
69
69
12 11 10 9
69
Information in this catalog is subject to change without notice. 2012-12 PDF FOLS 62E1-E-0086a