Professional Documents
Culture Documents
PolyJet 3D Printing Technology A4 Il
PolyJet 3D Printing Technology A4 Il
PolyJet 3D Printing Technology A4 Il
16 micron ultra-thin-layers Thin walls down to 0.6mm High accuracy 0.1mm High resolution Smooth surface Fine details Office environment Objet FullCure materials
SET UP
CLEAN
PolyJet Technology
Advanced Features
Embedded in the Objet Eden and Objet Desktop product lines are the breakthrough features of Objets PolyJet technology. Objets exclusive focus on photopolymer jetting drives the technology to ever-higher achievements in ultra-thin build layers, material properties, accuracy, speed, and ease-of-use. 16-micron Super-Thin Layers for Smooth Surfaces Microscopic drops are jetted in super-thin layers of up to 16 microns (0.0006). This results in ultra-smooth surfaces regardless of the geometric complexity of the model. 100 to 300-Micron Accuracy A combination of fine chemical development, precise mechanics and electronics, and advanced software features enables builds that fit very tight tolerances of 100 microns for most models, and up to 300 microns for all geometries. Durable Models for a Variety of Applications An integral part of the PolyJet technology is the Objet FullCure line of proprietary photopolymer resins. These materials offer excellent flexibility, impact strength and transparency, producing durable models suitable for snap fits and frequent handling.The Objet FullCure line includes multiple colors and the unique Tango flexible rubber-like materials. High-Speed Jetting for Greater Productivity PolyJet technology uses a raster process to produce photopolymer models, enabling the machine to build in slices of 65mm (2.5) rather than point-by-point. Several models can therefore be created in the same amount of time it takes other technologies to produce a single model. The combination of a raster process with high-speed mechanical movement further reduces build times compared to alternative technologies. Thin Walls for Unique Geometries The high-precision jetting of PolyJet technology enables superthin walls, down to 0.6mm, depending on the geometry. Clean, Easy Process Objets 3D Printing Systems can be used in an office-type facility, as the model and support materials are environmentally stable and are loaded in sealed cartridges, with the model material fully cured (Solidifield) immediately after build. The PolyLog materials management system optimizes materials usage and alerts the user when cartridges should be replaced. Objet Studio software is simple to use and intuitive, enabling virtually anyone to operate Objet systems efficiently. Easy Support Removal on any Geometry Objets support and model materials are completely separated with a high pressure WaterJet, resulting in clean, smooth surfaces. This process is quick and simple and allows finishing of most parts within 5 10 minutes. Fast jetting combined with easy support removal creates finished models, ready for use, in record time.
Objet Geometries Ltd. Headquarters 2 Holtzman st., Science Park, P.O Box 2496, Rehovot 76124, Israel T: +972-8-931-4314 F: +972-8-931-4315
Objet Geometries Inc. North America 5 Fortune Drive Billerica, MA 01821 USA T: +1-877-489-9449 F: +1-866-676-1533
Objet Geometries GmbH Europe Airport Boulevard B 210 77836 Rheinmnster Germany T: +49-7229-7772-0 F: +49-7229-7772-990
Objet Geometries AP Asia Pacific Unit 49, 10/f, HITEC 1 Trademart Drive Kowloon Bay, Kowloon Hong Kong T: +852-217-40111 F: +852-217-40555
Objet Geometries AP Limited China Rep Office Rm1701, CIMIC Tower, 1090 Century Blvd, Pudong Shanghai 200120 China T: +86-21-5836-2468 F: +86-21-5836-2469
2010 Objet, Quadra, QuadraTempo, PolyJet, FullCure, SHR, Eden, Eden250, Eden260, Eden260V, Eden330, Eden350, Eden350V, Eden500V, Job Manager, Objet Studio, CADMatrix, Connex, Connex350, Connex500, Alaris30, Objet24, Objet30, PolyLog, TangoBlack, TangoBlackPlus TangoGray, TangoPlus, VeroBlue, VeroWhite, VerowhitePlus, VeroBlack, VeroGray, Durus, Digital Materials, Polyjet Matrix and ObjetGreen are trademarks of Objet Geometries Ltd. and may be registered in certain jurisdictions. All other trademarks belong to their respective owners.
Q1/11
info@objet.com www.objet.com