Professional Documents
Culture Documents
303-03 Engine Cooling 2.3L EcoBoost - Removal and Installation - Cooling Fan
303-03 Engine Cooling 2.3L EcoBoost - Removal and Installation - Cooling Fan
303-03 Engine Cooling - 2.3L EcoBoost (201kW/273PS) 2019 Ranger
Removal and Installation Procedure revision date: 01/7/2019
Cooling Fan
303-1692
Holding Wrench, Pulley
Removal
2.
l Detach the wiring harness retainers.
l Disconnect the electrical connector.
http://www.fordservicecontent.com/Ford_Content/vdirsnet/workshop/ody/~WSKG/US/EN/... 1/9/2019
Page 2 of 4
4. NOTE: Take extra care not to damage the electrical connector.
Using the special tools, remove the cooling fan and clutch.
Use Special Service Tool: 303-1692 Holding Wrench, Pulley.
Torque: 81 lb.ft (110 Nm)
http://www.fordservicecontent.com/Ford_Content/vdirsnet/workshop/ody/~WSKG/US/EN/... 1/9/2019
Page 3 of 4
5. NOTE: This step is only necessary when installing a new component.
Remove the bolts and separate the cooling fan from the cooling fan clutch.
Torque: 93 lb.in (10.5 Nm)
Installation
http://www.fordservicecontent.com/Ford_Content/vdirsnet/workshop/ody/~WSKG/US/EN/... 1/9/2019
Page 4 of 4
http://www.fordservicecontent.com/Ford_Content/vdirsnet/workshop/ody/~WSKG/US/EN/... 1/9/2019