1.2 Khái niệm và định nghĩa về thiết kế theo mô đun 1.3 Thuận lợi và khó khăn của thiết kế theo mô đun 1.4 Lịch sử phát triển, ứng dụng điển hình của TKTMĐ Kỹ thuật thiết kế máy theo mô đun Principle of Separation – Nguyên tắc tách The principle of separation is how we determine the module, and of the five principles, this principle has the most difficulty being sublimated to a preferable technology. As the principles of separation defines that a module is allowed to have only a specified function or structural configuration in full consideration of the following: Nguyên tắc tách là cách chúng ta xác định mô đun, và trong năm nguyên tắc, nguyên tắc này có nhiều khó khăn nhất được kiểm soát bởi công nghệ thích hợp. Vì các nguyên tắc của sự tách biệt xác định rằng một mô-đun chỉ được phép có một chức năng được chỉ định hoặc cấu trúc cấu trúc khi xem xét đầy đủ các yếu tố sau: 1. The user does not mind whether the machine tool is designed using the modular principle or not, apart from machine tools of customer-oriented type, and thus the modules must have the least function and configuration acceptable, but not be overspecified. 2. Người sử dụng không quan tâm xem máy công cụ có được thiết kế bằng nguyên lý mô đun hay không, ngoài các loại máy công cụ theo kiểu định hướng bởi nhu cầu khách hàng, và do đó các môđun phải có chức năng và cấu hình thấp nhất, nhưng không được vượt quá 3. The module must have satisfactory stiffness as well as high joint stiffness. 4. Môđun phải có độ cứng thỏa đáng cũng như độ cứng liên kết cao 5. The machine tool accuracy of the module should be within allowable tolerance to achieve the required assembly accuracy under any joint conditions. 6. Độ chính xác của mô-đun phải nằm trong dung sai cho phép để đạt được độ chính xác của lắp ráp theo bất kỳ điều kiện liên kết nào. In this section, we should be aware of that how to disintegrate a machine tool as a whole into the proper number of modules and how to determine a group of standardized modules according to the design purpose. Trong phần này, chúng ta nên biết rằng làm thế nào để phân rã một máy công cụ từ toàn máy thành số lượng thích hợp của mô-đun và làm thế nào để xác định một nhóm các mô-đun chuẩn hóa theo mục đích thiết kế: 1. Reasonable separation methodology including economic viewpoint 2. Phương pháp tách hợp lý bao gồm quan điểm kinh tế 3. Applicability of platform concept 4. Khả năng áp dụng khái niệm nền tảng 5. Reconsideration of effectiveness of modular design of hierarchical type 6. Xem xét lại hiệu quả của thiết kế mô đun kiểu phân cấp 7. Evaluation method for preferred module determination 8. Phương pháp đánh giá để xác định module ưu tiên The platform can be defined as a new concept which is concerned with the LCA (Life cycle assessment) and remanufacturing of the product and that has actually been proposed. Importantly, the platform is a combination of several common modules defined in the manufacture of the different kinds of machine tool from a group of modules. Generally, the platform is an entity of higher level than the module. Nền tảng này có thể được định nghĩa là một khái niệm mới liên quan đến đánh giá vòng đời (LCA) và tái sản xuất sản phẩm và thực sự đã được đề xuất. Quan trọng hơn, nền tảng này là sự kết hợp của một số mô đun chung được định nghĩa trong việc sản xuất các loại máy công cụ khác nhau từ một nhóm các mô-đun. Nói chung, nền tảng này là một thực thể có cấp độ cao hơn module