Retain printed data for historical reference only. For future maintenance, use only current data. Print Date: Thu Aug 11 03:51:20 CDT 2022 Model 172 (Series 1996 And On) Maintenance Manual (Rev 24) 11-00-00 (Rev 11)
PLACARDS AND MARKINGS - INSPECTION/CHECK
1. Scope A. This section has inspection data for the interior and exterior placards. 2. Interior and Exterior Placard and Decal Inspection NOTE: This section gives an inspection procedure for all placards, decals, and markings on the airplane. A. Do an inspection of the placards, decals, and markings. (1) Examine the interior of the airplane. Include the aft baggage areas for the installation of all required placards, decals, and markings. (a) For required placards, decals, and markings, refer to the Model 172R Illustrated Parts Catalog. (2) Examine the exterior of the airplane for the installation of all required placards, decals, and markings. (a) For required placards, decals, and markings, refer to the Model 172R Illustrated Parts Catalog. (3) Examine the airplane identification (ID) plate. (a) The ID plate is found on the left side of the stinger, Zone 310. Refer to the Model 172R Illustrated Parts Catalog and Chapter 6, Airplane Zoning - Description and Operation.