The document contains 23 questions related to drawing multi-view projections and developments of various geometric solids like prisms, pyramids, cones, cylinders, and spheres. The questions cover topics from units III, IV and V including drawing projections when the solids are cut by different planes, developing lateral surfaces, and drawing isometric views.
The document contains 23 questions related to drawing multi-view projections and developments of various geometric solids like prisms, pyramids, cones, cylinders, and spheres. The questions cover topics from units III, IV and V including drawing projections when the solids are cut by different planes, developing lateral surfaces, and drawing isometric views.
The document contains 23 questions related to drawing multi-view projections and developments of various geometric solids like prisms, pyramids, cones, cylinders, and spheres. The questions cover topics from units III, IV and V including drawing projections when the solids are cut by different planes, developing lateral surfaces, and drawing isometric views.
1. prism of side of base 25mm and axis 50mm long, is
resting on an edge of its base on H.P. The face containing that edge is inclined at 300 to H.P. Draw the projections of the prism when the edge on which the prism rests, is inclined at 600 with V.P.
2. A square pyramid base 40mm side and axis 65mm
long has its base in the V.P. one edge of the base is inclined at 300 to the H.P. and a corner contained by the edge on the H.P. Draw its projections.
3. A square prism, base 40mm side and height 65mm,
has its axis inclined at 450 to the H.P. and has an edge of its base, on the H.P. and inclined at 300 to the V.P. Draw its projections.
4. a pentagonal pyramid side of base 30 mm and axis 60
mm long lies with one of its slant edges on H.P. such the axis is parallel to V.P. draw its projections. A cone of base diameter 40mm and axis height 60mm rests on the ground on a point of its base circle such that the axis of the cone is inclined at 400 to the H.P. and 300 to the V.P. Draw its top and front views.
5. A regular pentagonal pyramid with the sides of its base
30mm and height 80mm rests on an edge of the base. The base is tilted until its apex is 50mm above the level of the edge of the base on which it rests. Draw the projections of the pyramid when the edge on which it rests is parallel to V.P. and the apex of the pyramid points towards V.P.
6. a square prim, side of base 40 mm and height 60 mm
rests with its base on H.P. such that one of its rectangular faces is inclined at an angle of 30 degrees to V.P. draw its projections.
7. A pentagonal prim of side of base 30 mm and axis 60
mm long is resting on H.P and a corner of its base. Draw the projections of prism when the base is inclined at 60 degrees to H.P. and the axis appears to be inclined at 30 degrees to V.P.
UNIT IV
8. A hexagonal pyramid side of base 30mm axis 70mm is
resting on H.P. on its base. It is cut by a section plane perpendicular to V.P. and at 450 to H.P. and passing through the mid point of the axis of the pyramid. Draw the development of the lateral surface of the truncated pyramid. 9. A rectangular prism, side of base 40 mm X25 mm and height 60 mm rests with its base on H.P such that one of its larger rectangular faces is parallel to V.P. A section plane perpendicular to H.P. and parallel to V.P cuts the prism into two equal halves. Draw its top view and sectional front view. 10. A hollow cylinder of 40 mm outside diameter and 30 mm inside diameter is resting on a point on the rim in V.P with axis length of the cylinder is 60 mm. it is cut by a vertical section plane inclined at 600 to V.P and bisecting the axis. Draw the sectional front view, top view and trace the shape of the section. 11. A sphere of 75 mm diameter is cut by a section plane perpendicular to the V.P. and inclined at 300 to the H.P. in such a way that the true shape of the section is a circle of 50 mm diameter. Draw its front view, sectional top view and sectional side view. 12. A pentagonal pyramid of base side 40 mm and axis length 80 mm lying on the H.P on one of its triangular faces with its axis parallel to the V.P. it is cut by a plane inclined at 300 to the H.P. and perpendicular to V.P. the cutting plane meets the axis at 15 mm from the base. Draw the elevation, sectional plan and the true shape of the section. 13. A cone of base diameter 50 mm and axis 75 mm long has its base in V.P. it is sectioned by a vertical section plane 10 mm to the right of the axis. Draw its projections and develop the surface of the truncated cone. 14. A vertical cylinder of base diameter 30 mm and axis 45 mm long is sectioned such that its front view appears as isosceles triangle of 30 mm and height 45 mm. develop its surfaces. 15. A cube of 40 mm edge stands on one of its faces on H.P. with a vertical face making 450 to V.P. a hole of 30 mm diameter and whose axis is perpendicular to VP and parallel to HP is drilled centrally through the cube such that the hole passes through the opposite vertical edges of the cube. Obtain the development of the lateral surface of the cube with the hole. 16. A hexagonal prism of side of base 30 mm and axis 65 stands on one of its ends in H.P with two of rectangular faces parallel to VP. A circular hole of diameter 40 mm is drilled completely through the prism such that the axis of the hole is perpendicular to V.P. and bisects the axis of the prism. Draw the development of the lateral surface of the prism showing the shape of the holes formed on it. 17. A vertical cone of 40 mm diameter of base and height 50 mm is cut by a cutting plane perpendicular to VP and inclined at 300 to HP so as to bisect the axis of the cone. Draw the development of the lateral surfaces of the truncated portion of the cone.
UNIT V 18. Draw the isometric view of a cone 40 mm diameter and axis 55 mm long when its axis is horizontal. Draw isometric scale.
19. Draw the isometric projection of a frustum of
hexagonal pyramid, side 30 mm . the top face 15 mm of height 50 mm.
20. A sphere of diameter 40 mm rests centrally on the top
of a square frustum, base 60 mm to 40 mm and height 75 mm. draw the isometric view of the combination of solids.
21. A pentagonal prism of base 40 mm and axis 70 mm
long has a central triangular hole of side 30 mm cut through one of the rectangular faces. Draw the isometric view of the prism. 22. A cylinder of base diameter 30 mm and axis 60 mm is resting centrally on a slab of 60 mm square and thickness 20 mm. draw the isometric projection of the combination of the solids.
23. Draw the isometric View of the following
24. Draw the Orthographic projections from the given isometric view: