Professional Documents
Culture Documents
M140x Numerical Relay Features
M140x Numerical Relay Features
Part of the 140 platform, the M140x feeder management relays provide an integrated solution for the complete
protection, control and monitoring of overhead lines and underground cables, covering all distribution voltage levels.
Providing all essential information to efficiently maintain complex power systems and their components, the M140x
relay family is user-friendly, allowing application on any electrical network.
The M140x is a feeder management relay platform with over current and earth fault protection, as well as auto reclose
and a full suite of protection, control and monitoring functions. The platform also provides main or back-up protection
for MV, solidly earthed, and isolated neutral systems.
Key benefits:
Full feeder management with efficient monitoring, control, recording and digital communications
Supports major digital control system protocols for integration into DCS, SCADA and engineering workstations.
Overview
3-stages of non-directional over current, earth fault, sensitive earth fault protection
Negative phase sequence over current, Broken conductor, Breaker fail protection.
IEC 61850 with Rear FO Port, Modbus RTU or IEC60870-5-103 with RS 485 Rear Port for Remote Communication.
Key benefits:
Auto reclose function offers multi shots reclosing to avoid discontinuity during transient fault tripping in transmission
lines.
The standard curves offers reliable fault tripping, without constraining circuit loadability
Cold Load Switching feature avoids protection relay tripping due to inrush current, when a distribution circuit is re-
energized following an extended outage.
ANSI ® Device Numbers and Functions
79 Auto reclose
86 Latching/Lockout Contacts
50BF CB Failure
68 Inrush Blocking
Three Phase & Earth Fault Over current protections With Three stages of
✓ ✓ ✓ ✓
settings- Low set, wide set, High set (True RMS measurement).
6 independent Characteristics for Phase and Earth Fault. ✓ ✓ ✓ ✓
Negative sequence & Broken Conductor Protection x x ✓ x
Settings with Password Protection. ✓ ✓ ✓ ✓
16 Characters 2 Line LCD display with backlight- alphanumeric display ✓ ✓ ✓ ✓
1Amp & 5 Amp CT secondary selectable by software ✓ ✓ ✓ ✓
Aux Voltage: 24V, 30V, 48V, 110, 220 Vdc ✓ ✓ ✓ ✓
DC transient free instantaneous High set with operating time <25
milliseconds @5times the setting. (Takes care of CT saturation) ✓ ✓ ✓ ✓
Self Monitoring. ✓ ✓ ✓ ✓
Primary Current Metering x ✓ ✓ x
Secondary current Metering ✓ ✓ ✓ ✓
Sequence Components Metering x x ✓ x
Reset time feature for flashing faults. ✓ ✓ ✓ ✓
Two group of protection settings. x ✓ ✓ x
Cold load Switching x ✓ ✓ x
M140X FEATURES / AVAILABLE MODELS M 140A M 140B M 140C M 140D
Multi shot Auto reclose. x ✓ ✓ x
Trip circuit supervision. x ✓ ✓ x
Circuit Breaker failure protection. x ✓ ✓ x
Circuit Breaker monitoring. x ✓ ✓ x
External blocking feature. x ✓ ✓ x
Configurable Digital inputs. x ✓ ✓ x
Configurable Digital outputs. x ✓ ✓ x
Configurable dual color LED Indications. x ✓ ✓ x
Maximum current demand. x ✓ ✓ x
Feeder identification. x ✓ ✓ x
Software
M140x PC STUDIO
M140x PC STUDIO is a PC tool for configuring M140C and M140D relays that assemble all tools in a palette for
simple entry, with intuitive navigation via fewer mouse-clicks.
M140x PC STUDIO
July-2022