Professional Documents
Culture Documents
Exhaust Manifold
Exhaust Manifold
Exhaust Manifold
Page 1 of 3
Shutdown SIS
Previous Screen
Exhaust Manifold
SMCS - 1059-12; 1059-11
a) remove muffler
NOTE: Be extra careful not to cause damage to the fuel lines when the manifold bolts are
removed.
3. Disconnect fuel line (6) from the fuel filter. Remove bolt (5) that holds the clip for fuel line (6).
4. Remove two clamps (7) that hold breather tube (3) to the cylinder block. Loosen clamp (4) and
remove breather tube (3).
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 8/2/2019
D3B TRACTOR / POWER SHIFT / 23Y00001-UP (MACHINE) POWERED BY 32... Page 2 of 3
5. Bend locks (9) down. Remove bolts (10) and locks (9) that hold the exhaust manifold to the
cylinder head.
1. Put the gaskets and exhaust manifold (1) in place on the cylinder head.
2. Put 5P3931 Anti-Seize Compound on the threads of the bolts that hold the exhaust manifold in
place.
3. Install the locks and bolts that hold the exhaust manifold to the cylinder head. Bend the locks
up.
4. Put breather tube (3) in position and tighten clamp (2). Install two clamps (6) that hold the
breather tube to the cylinder block.
5. Connect fuel line (4) to the fuel filter. Install bolt (5) that holds the clip for the fuel line.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 8/2/2019
D3B TRACTOR / POWER SHIFT / 23Y00001-UP (MACHINE) POWERED BY 32... Page 3 of 3
end by:
a) install muffler
Copyright 1993 - 2019 Caterpillar Inc. Fri Aug 2 23:18:38 UTC+0800 2019
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe... 8/2/2019