742h Label Placement

You might also like

Download as xls, pdf, or txt
Download as xls, pdf, or txt
You are on page 1of 3

TECH PACK

Document No. : RPPD73301


Lot 89A, B.E.P.Z.
Walgama, Malwana. LABEL PLACEMENT

CUSTOMER: ODLO

STYLE NO : 188742/ 188742H/ 188752

Care label, Biocide Label and Keep away from fire


Lable
Size label

Place to CB Place 8cm away from CB to the inside of the wearer's left side.

TolerancThis is a draw programe. Please get it from sample room. Biocide Label is attached underneath the Care Label.

Do not keep loose thread at any end. Keep away from fire Lable behind the care labe and Bioside Lable.

Tolerance (+/-) 0.5cm

Code label.
Place 8cm away from centre back to wearer's right.
Tolerance (+/-) 0.5cm

All label attaching method

1. length of tack stitch should be max. 5mm


2. tack stitch should be placed as much as possible
towards the edges of the label;
distance to cutting edge side = max. 3mm; 0.1mm
tole:
distance to cutting edge top = 3mm; 0.1mm
3. tack stitch should be as invisible as possible from
the outside, means stitch should sit on upper double
needle stitching from waistband
4. tension of stitching should be a tiny little bit tighter
as on sample in order to avoid unclean overlaying of
thread

……………...…………
FIT & CONS ENG
CONTROLLED

This document is the property of MAS Active (Pvt) Linea Intimo and the information contained herein is confidential. Persons receiving this document are responsible to maintain confidentiality except when absolutely necessary and should be consistent with intended use.
TECH PACK
Document No. : RPPD73301
Lot 89A, B.E.P.Z.
Walgama, Malwana. Label Attaching Machine

CUSTOMER: ODLO

STYLE NO : 188742/ 188742H/ 188752

Please use bar tack machine to attach labels.

This is a draw programe. Please get it from sample room.

1. length of tack stitch should be max. 5mm


2. tack stitch should be placed as much as possible
towards the edges of the label;
distance to cutting edge side = max. 3mm; 0.1mm
tole:
distance to cutting edge top = 3mm, 0.1mm tole:
3. tack stitch should be as invisible as possible from
the outside, means stitch should sit on upper double
needle stitching from waistband
4. tension of stitching should be a tiny little bit tighter
as on sample in order to avoid unclean overlaying of
thread

……………...…………
FIT & CONS ENG
CONTROLLED

This document is the property of MAS Active (Pvt) Linea Intimo and the information contained herein is confidential. Persons receiving this document are responsible to maintain confidentiality except when absolutely necessary and should be consistent with intended use.
TECH PACK
Document No. : RPPD73301
Lot 89A, B.E.P.Z.
Walgama, Malwana. Care label, Bioside & Keep away from fire label tack Method

CUSTOMER: ODLO

STYLE NO : 188742/ 188742H/ 188752

Use L/S machine

Prepare the 3 labels (Biocide Label is attached underneath the Care Label. Keep away from fire Lable behind the care labe and Bioside Lable.)

……………...…………
FIT & CONS ENG
CONTROLLED

This document is the property of MAS Active (Pvt) Linea Intimo and the information contained herein is confidential. Persons receiving this document are responsible to maintain confidentiality except when absolutely necessary and should be consistent with intended use.

You might also like