Professional Documents
Culture Documents
Installation System Request Form - v.3 - Basic Info
Installation System Request Form - v.3 - Basic Info
Installation System Request Form - v.3 - Basic Info
/ 4
Installation System
Cable Tray/Ladder, Piping, and HVAC/Duct Steel Supports
Request Form
(Place a check mark √ for the type of quotation stage.)
*Feasibility study – Preliminary design and reference drawings for
TENDERING STAGE
understanding with bill of materials will be provided.
*Approval – Customer is committed to use Hilti System. Detailed engineering
DETAILED DESIGN STAGE
drawings and calculations, if any, will be provided.
OFFSHORE Application
1. Project Information
Project name
Project segment Choose an item:
City
State / Province
Country
HI Site Code
Potential Order Size
Project HRP
2. Customer Information
Company Name
Country
Customer Name Contact Number
Position Email
3. Submitted by
Hilti MO
Name
Position
4. Timing
Date Today
Date Needed
Estimated Decision Date
Estimated Delivery Date
INSTALLATION SUPPORT
5.1 Type of Application (Place a check mark √ on the item selected.) SAMPLE ONLY
Installation System
Cable Tray/Ladder, Piping, and HVAC/Duct Steel Supports
5.6 Base Material (Place a check mark √ on items requiring answers for Y/N.)
Concrete Base Material (*If no, proceed to steel base material) Yes No
Cracked Concrete? (Y/N) Yes No Conc. Thickness mm
Steel Base Material (*If no, provide information required in conc. base material above) Yes No
Attached to: Beam Flange Beam Web
Is steel profile inclined? (Y/N) Yes No If yes, provide θ o
5.7 Design Code Requirement (Place a check mark √ on the required design code.)
1)
Note: In the case of rework (revisions) because of incorrect information from the client, the design request will be treated as a new request
and will be charged accordingly.
2)
Unfactored Load = Nominal Load
3)
Factored Load = Nominal Load x Load Factor
Installation System
Cable Tray/Ladder, Piping, and HVAC/Duct Steel Supports
5.8.4 Seismic Load (Place a check mark √ on items requiring answers for Y/N.)
5.8.5 Wind Load (Place a check mark √ on items requiring answers for Y/N.)
5.8.6 Snow Load (Place a check mark √ on items requiring answers for Y/N.)
5.8.7 Friction Load – for Pipe Support only (Place a check mark √ on items requiring answers for Y/N.)
Note: Information provided above is for reference only and shall not be used as a final data in the design.
The client needs to provide sea force acceleration based on their Marine Transport Contractor advise.
Installation System
Cable Tray/Ladder, Piping, and HVAC/Duct Steel Supports
5.9 Deflection Criteria (Place the deflection requirement for beams and cantilever beams as per project specification.)
Note: In case no information is provided to HILTI by the client, HITLI will consider the following:
a. Maximum Beam Allowable Deflection, L/200
b. Maximum Cantilever Allowable Deflection, L/150
6. Documents/Submittals
6.1 Project Documents (Place a check mark √ on items applicable to this design request.)
Note: 1) The channels will be delivered on precut length. The geometrical tolerances will be as per ISO 1101.
2)
All items will be packed as per Hilti Standard Packaging procedures.
3)
The steel supports will be assembled as per layout shown in the issued detailed drawing.
a. Detailed design of all typical supports with Bill of Materials - BOM and Instruction for Use - IFU drawings.
b. The IFU - Instruction for Use drawings will be submitted at the time of delivery of material.
c. Standard conditions of contract to be given by customer.
d. Inputs for quote preparation (lump sum).
e. Design and Engineering Calculation Report, if needed.
f. Others. Please specify: ______________________________________________________________
Additional Requirements
Note: In the case of rework (revisions) because of incorrect information from the client, the design request will be treated as a
new request since the design needs to be checked and analyzed from the beginning. A minimum of 7 working days is
required and depending on the scope of work. A charged will be imposed accordingly.