Professional Documents
Culture Documents
Nannio
Nannio
User Manual
Congratulation!
Thanks for your patronage of our products and welcome to nannio Baby
Caring World! You can start to take care your baby whenever and
wherever you want.
This user manual has all the feature operations and troubleshooting
necessary to install and operate your nannio Baby monitor. Please review
this manual thoroughly to insure proper installation and operation of this
product.
Please keep your purchase order number carefully as this number will be
needed when you ask for warranty.
Before you use the products, please read the safety instructions.
Safety instructions
1 x Parent unit
1 x Baby unit
2 x Power Adapter
1 x Wall-Mount Kit
1 x Quick Guide
Baby unit
1. Camera
5
2. Power on light
4. Nightlight
5. Antenna
1
6 6. On/off slide
2
3 7 7. Nightlight on/off button
8 8. Microphone
10
Parent unit
3 9. Mode button
4 10. Talk-back
5 10 11. Lullaby button
6 11 12. Socket for power adapter
12
13. Menu button
13
14. Control button
15. Microphone
14 15
Power on the baby monitor
Push the on/off switch on the baby Press the on/off button on the parent
unit to the ON position. unit to turn on the unit.
Automatic connection
When the parent unit is turned on, it starts to search for the baby
unit.
When the parent unit and baby unit are connected, the connection
light on the parent unit becomes green.
When the baby unit is turned off, the parent unit will show
“out-of-range image”. If you want both products work properly,
please make sure that the baby unit is turned on.
Note: If no connection has been established, the connection light turns red,
the parent unit beeps three short beeps every 20 seconds and the
out-of-range image appears on the monitor
Placement of baby monitor
>2.5m/8.2ft >1-1.5m/3-3.5ft
Place the parent unit within the Make sure that the distance between
operating range of the baby unit. Make the baby unit and baby is more than
sure it is at least 2.5 meters/8.2 feet 1-1.5 meters/3-3.5 feet, because of
away from the baby unit to avoid potential strangulation hazards.
acoustic feedback.
5ft
16
m/
50
300m/985ft
Tip 1: Adjust the baby unit in a way that ensures the best view of the
baby.
Tip 2: Put the baby unit at a higher position to get a good overview of
the crib or playpen.
Operating range
The operating range is up to 50 meters/165 feet indoors and 300
meters /985 feet outdoors.
Volume
You can adjust the speaker volume of the parent unit to the level
you like.
1 Press the top or bottom part of the control button to adjust the
volume.
Note: When the volume is at its minimum, the volume is muted. The parent
unit shows a mute icon on the status bar.
Brightness
You can adjust the brightness of the parent unit to the level you
like.
1 Press the left and right part of the control button to adjust the
brightness of the screen of the parent unit.
Video•Audio•VOX
With the baby monitor turned on, you can choose 3 different modes
by pressing the mode button on the side of the parent unit.
Video Mode
1 Press the mode button on the side of the parent unit to select the
VIDEO mode.
2. After enabling the video mode, the screen is always on, so you
can see your baby always and all sounds are directly transmitted
to the parent unit.
Audio Mode
1 Press the mode button on the side of the parent unit to select the
AUDIO mode.
3. If your baby is crying, the display is still in black, but you can hear
the crying of your baby.
VOX Mode
1 Press the mode button on the side of the parent unit to select
VOX mode.
2. When the VOX mode is activated, the display and sound of the
parent unit turned off. And the VOX light becomes green
Night light
Press the night light on/off on the baby unit to turn on the night light
feature.
Note: The night light cannot be controlled from the parent unit. You can only
turn on or off the night light on the baby unit.
Soothing lullaby
Talk-back
You can use the Talk-back button on the parent unit to talk to your
baby.
Note: When the “Talk-back” button is pressed, the parent unit cannot process
sounds coming from the baby unit.
Menu features
Volume
All features described in the following sections can be operated
through the menu of the parent unit.
Note: When you press the menu button again, you will leave the menu. Or,
if you are in the menu but do not press any buttons for 5 seconds, the menu
will exit without saving the changed settings.
Zoom (Digital Pan&Tilt)
1 Press button.
2. Choose the zoom icon and push the icon and choose on.
3. Then you can use to pan and tilt to the position you want.
Tip: You can use the top/bottom/right/left part of the control button to choose what image will
be shown on the parent unit.
4. Press the menu button to save the new setting. The image is automatically saved after
5 seconds.
5. Go to the zoom menu and turn off the zoom function, if you want to zoom out the image.
Voice Activation (Sensitivity)
Voice Activation (Sensitivity) Press the right part of the control button to
The sensitivity level of the baby unit defines access the sensitivity levels.
what you hear through the parent unit.
When the level is set high, you will hear Press the top or bottom part of the control
many sounds, including soft background button to select the desired sensitivity level.
sounds. When the sensitivity level is set
low, you will hear only the louder sounds. Note:If your baby only makes soft sounds, the
sensitivity of the baby unit needs to be set to a high
sensitivity level on the parent unit.
Low sensitivity
Middle sensitivity
High sensitivity
Press the left part of the control button to
save the new setting and to return to the
main menu.
Very High sensitivity
1.Press the right part of the control button to access the vibration options.
On when the parent unit is muted- when volume is set to minimum (muted) the
parent unit will vibrate when sound is detected from the baby unit
Always on- parent unit will always vibrate when sound is detected from the baby
unit and above sensitivity level.
When vibration is on, the parent unit will vibrate when your baby cries or
makes sounds, according to the sensitivity level you have selected.
The parent unit also vibrates when the temperature alert is on and a
maximum or minimum temperature is reached or when the parent unit lost
connection with the baby unit.
2.Press the left part of the control button to save the new setting and to return to the
main menu.
Temperature setting
The temperature sensor enables you to 1 Press the right part of the control button
monitor the temperature in your baby’s to access the temperature options.
room.
Tip:You can change the temperature unit
Note: The current temperature in your baby's room from °F to °C by selecting the unit option.
is shown in the status bar of the parent unit.
2. In the temperature menu, an alert for
temperature can be set on or off.
3. You can select the alert option to turn 4. Press the left part of the control button to
on the alert. To change the maximum save the new setting and to return to the
and minimum temperatures for the main menu.
temperature alert, select the desired
temperatures at ‘ ’ and ‘ ’ in the 5. The parent unit shows this alert when
temperature menu. chosen temperatures are measured or
exceeded.
Technical Specifications
Baby unit
Auto Infrared Night Vision Yes
Auto Out of Range Warning Yes
Temperature Sensor Yes
Lullabies Yes, 5x
Manual Pan-Tilt Yes
Auto Infrared Night Vision Yes
Auto Out of Range Warning Yes
Parent unit
LCD Screen 3.5"
Talkback Function Yes
Vibration Mode Yes
Voice Activation Screen Yes, VOX mode
Auto Out of Range Warning Yes
Battery Low Indicator Yes
Battery Life 10 hrs, 2600mAh
Volume Control Yes
Brightness Control 5-level
Sensitivity Setting 9-level
Menu Style Icons
Belt Clip No
Hand-Held and Rechargeable Yes (Parent unit)
System
Interface FHSS
Frequency 2.4 GHz
Maximum Outdoor Range 300m/985ft
Maximum Interior Range 50m/164ft
Mini USB Charging Yes
Power Cord 2.5m/8ft
AC input voltage 100 - 240 V
AC input frequency 50/60 Hz
Wall mount
Printing instructions:
Print this page in scale 100 % and use the template to accurately mark the position of the
holes for the screws on the wall.