This document provides design details for a one-way slab, including dimensions, loads, material properties, and calculations for bending moments, steel reinforcement requirements, shear checks, and temperature reinforcement. Key values include a span length of 3.3m, a minimum slab thickness of 110mm, a factored load of 11.82 kN/m2, and required steel areas and spacing to resist bending and temperature effects within design limits.
This document provides design details for a one-way slab, including dimensions, loads, material properties, and calculations for bending moments, steel reinforcement requirements, shear checks, and temperature reinforcement. Key values include a span length of 3.3m, a minimum slab thickness of 110mm, a factored load of 11.82 kN/m2, and required steel areas and spacing to resist bending and temperature effects within design limits.
This document provides design details for a one-way slab, including dimensions, loads, material properties, and calculations for bending moments, steel reinforcement requirements, shear checks, and temperature reinforcement. Key values include a span length of 3.3m, a minimum slab thickness of 110mm, a factored load of 11.82 kN/m2, and required steel areas and spacing to resist bending and temperature effects within design limits.
Floor Finish 75 1800 135 P.C.C 60 2300 138 Factored Load qu 11.82 Factored Bending Moments ln = 3 Exterior Support Mu- 4.43 Exterior Support M u + 7.60 First Interior Support M u - 11.82 Check for Maximum Spacing of Main Steel 3h = 330 mm 450mm = 450 mm 159600/fy - 2.5 Cc = 330 mm 126000/fy = 300 mm Smax = 300 mm Section R=Mu/bd 2 ω ρ ρbd As,min As Exterior Support Mu- 0.6432 0.0405 0.0017 144 220 144.3 Exterior Span Mu + 1.1025 0.0405 0.0030 251 220 251.471 First Interior Support Mu - 1.7151 0.0405 0.0048 400 220 400.396 Exterior Span Mu+ As Bar with Spacing As,sel 251 #10 @275mm c/c 258 Available Balance Section As Extra Steel Steel As Exterior Support Mu- 144 First Interior Support Mu - 400 Temperature Reinforcement Temp Steel Bar with Spacing As,sel 220 #10 @300mm c/c 237 Check For Shear Vu Vlim 19.25 22.27 OK