Professional Documents
Culture Documents
Active Filters Problems and Solutions
Active Filters Problems and Solutions
Active Filters Problems and Solutions
Problem 1
Find the transfer function of the filter below.
a. Find the corner frequency.
b. Deduce its type
Answer:
Problem 2
Find the transfer function of the filter below.
a. Find the corner frequency.
b. Deduce its type
1|Page
Answer:
Problem 3
The circuit parameters for a series RLC bandstop filter are R =2 k, L = 0.1 H, C
=40 pF. Calculate:
a. The center frequency
b. The half-power frequencies
c. The quality factor
d. Find the transfer function for each of the active filter.
Answer:
2|Page
Problem 4
A general first-order filter is shown below.
b.
c. What condition must be satisfied for the circuit to operate as a high-pass
filter?
d. What condition must be satisfied for the circuit to operate as a lowpass
filter?
3|Page
Solution
Problem 5
A second-order active filter known as a Butterworth filter is shown below.
a. Find the transfer function Vo /Vi .
b. Show that it is a low-pass filter.
Solution
4|Page
Problem 6
Sketch the Bode Diagram of the H(s). Verify you diagram using matlab
𝑠(𝑠 + 20)
𝐻(𝑠) =
(𝑠 + 1)(𝑠 2 + 60𝑠 + 400)
Answer
5|Page
Problem 7
Sketch the Bode Diagram of the H(s). Verify you diagram using matlab
Answer
Problem 8
The circuit shown below has the impedance Z(s).Find:
a. the values of R, L, C, and G
b. the element values that will raise the resonant frequency by a factor of 103
by frequency scaling
6|Page
7|Page
8|Page