Professional Documents
Culture Documents
NT Bosch Edc7c3 Man 1033
NT Bosch Edc7c3 Man 1033
00
The lay-by pins are placed in the lower part of the ECU.
Dimsport srl – 15020 Serralunga di Crea (AL) - Italy- Tel. +39 0142 9552 – WEB : www.dimsport.com -1-
NT_BOSCH EDC7 C3 MAN VER 02.00
ECU CONNECTOR
In order to connect to the ECU use the CABLE F32GN037C.
Make sure that the POWER led (red) on NEW TRASDATA is ON.
DIRECT CONNECTION
For the direct connection it is required the soldering adapter F34NTA06, please verify the PIN 1 of
the board matches with the PIN 1 of the adapter.
Dimsport srl – 15020 Serralunga di Crea (AL) - Italy- Tel. +39 0142 9552 – WEB : www.dimsport.com -2-
NT_BOSCH EDC7 C3 MAN VER 02.00
DIMA CONNECTION
Dimsport srl – 15020 Serralunga di Crea (AL) - Italy- Tel. +39 0142 9552 – WEB : www.dimsport.com -3-