Professional Documents
Culture Documents
TP 3
TP 3
NEMA TP 3
STANDARD
FOR THE
LABELING OF
DISTRIBUTION
TRANSFORMER
EFFICIENCY
Published by
© Copyright 2000 by the National Electrical Manufacturers Association. All rights including translation into
other languages, reserved under the Universal Copyright Convention, the Berne Convention for the
Protection of Literary and Artistic Works, and the International and Pan American Copyright Conventions.
--```-`-`,,`,,`,`,,`---
Table of Contents
Foreword..................................................................................................................................... iii
1.1 Scope...........................................................................................................................................1
--```-`-`,,`,,`,`,,`---
--```-`-`,,`,,`,`,,`---
Foreword
This foreword is for information only and is not part of the standard.
NEMA established the standard efficiency of distribution transformers in TP 1, Guide for Determining
Energy Efficiency for Distribution Transformers.
TP 2 establishes the test procedures to test the transformers for no load loss and load loss for the
purpose of establishing the conformance of the transformer efficiency to the established minimum
efficiency of TP 1.
This standards publication establishes the procedure for labeling all such distribution transformers that
meet the criteria of the established efficiency of TP 1.
This standards publication was developed by the Transformer Products Section. Section approval of the
standard does not necessarily imply that all section members voted for its approval or participated in its
development. Proposed or recommended revisions should be submitted to:
Rosslyn, VA 22209
At the time it was approved, the Section was composed of the following members:
Disclaimer
The standards or guidelines presented in a NEMA standards publication are considered technically sound
at the time they are approved for publication. They are not a substitute for a product seller's or user's own
judgment with respect to the particular product referenced in the standard or guideline, and NEMA does
not undertake to guaranty the performance of any individual manufacturer's products by virtue of this
standard or guide. Thus, NEMA expressly disclaims any responsibility for damages arising from the use,
application, or reliance by others on the information contained in these standards or guidelines.
--```-`-`,,`,,`,`,,`---
Section 1
STANDARD FOR LABELING
1.1 Scope
This standard defines the labeling of distribution transformers tested to the efficiency levels specified in
TP 1. The label shall be affixed to the transformer in a permanent manner. The label becomes the
certificate of conformance to the established efficiency of the transformer.
1.2 Label
The label may be type A or type B, at the option of the manufacturer:
Type A: The conformance statement shall be part of the main transformer's nameplate.
Type B: The conformance statement shall be on a separate nameplate from the main transformer
nameplate and be of the same material affixed in the same manner.
Type A:
1. Transformer serial, catalogue or style number
2. Efficiency statement
Type B:
1. Transformer serial, catalogue or style number
2. Efficiency statement
The type B label shall be of the same material as the main transformer nameplate and mounted in close
proximity.