Professional Documents
Culture Documents
CSS9 TQ PT 1st2nd
CSS9 TQ PT 1st2nd
ASSESSMENT
____1. Why do you think that selection, testing, and cost of material are the important factors to be
taken into consideration when choosing the right material?
a. because these are rules in choosing the right material for their components and assemblies
b. because we always need to relate material properties to product and process quality
c. because we need to consider the label or name of the company which is producing a great
quality of materials and are known in the market
d. because we can meet the standards and the right cost for materials to buy
____3. JHope detach the monitor from the computer, the computer will still function, but it’s not
going to be very helpful.
As a would-be computer technician, how will you infer with the statement inside the box?
a. Without an input device, there’s no way to determine what the computer is doing.
There is no indicator of errors, nor of the need for additional input.
b. Without an output device, there’s no way to determine what the computer is doing.
There is no indicator of errors, nor of the need for additional input.
c. An input device will dictate the output device what the users is doing or clicking.
d. An output device will dictate the output device what the users is doing or clicking.
____4. How will you start searching the information on the internet?
a. click the search engine
b. click the web browser
c. type the keyword that you are looking for
d. type the URL on the address bar
____5. Mr. Dick wants to connect and hold the lead of electronics component.
What
appropriate hand tools should be used?
a. long nose pliers b. side cutter pliers c. screwdriver d. cutter
ANSWER KEY
1. a 6. a
2. d 7. b
3. b 8. a
4. b 9. c
5. c 10. b
TABLE OF SPECIFICATION
Learning Percent No of Remembering Understandin Applying Analyzin Evaluating Creating Total
Competencies of Items g g
Items
Easy Average Difficult 100%
(50%) (30%) (10%)
LO 2. Prepare
hand tools
TLE_IACSS9-
12UHT-IIIb-18
LO 3. Use
appropriate hand
tools and test
equipment
TLE_IACSS9-
12UHT-IIIc-19
LO 4. Maintain
hand tools
TLE_IACSS9-
12UHT-IIId-20
LESSON 6: TERMINATING AND CONNECTING ELECTRICAL WIRING AND ELECTRONICS CIRCUIT (TCEW)
LO 1. Plan and
prepare for
termination/
connection of
electrical wiring/
electronics
TLE_IACSS9-
12TCEW-IIIe-f-
21
LO 2: Terminate/
connect
electrical
wiring/electronic
circuits
TLE_IACSS9-
12TCEW-IIIg-i-
22
LO 3: Test
termination/
connections of
electrical
wiring/electronics
circuits
TLE_IACSS9-
12TCEW-IIIi-j-23
Total 100% 10 3 2 2 2 1 0 10
PERFORMANCE TASK
Directions: Take a video of yourself creating your own electrical splices applying the different
splicing techniques. Submit that video to your teacher’s messenger account.
Scoring Rubric
Item Laboratory 1 2 3 4 5 TOTAL
No. Activities
1 Splicing
Technique
2 Wiring and
Connections
are soldered
3 Safety
Precautions
are observed.
5 – Skillfully performed
4 – Very satisfactorily performed
3 – Satisfactorily performed
2 – Fairly performed
1 – Poorly performed
Noted by:
ASSESSMENT
____1. What method is used to determine computer motherboard faults and problems?
a. beep analyzing c. power analyzing
b. click analyzing d. sound analyzing
____3. Testing refers to the methods and procedures of determining the signals and
responses from an electronic component.
____4. Which is NOT a step on safety inspection guide to identify potentially unsafe conditions on
electrical Products?
A. Check for worn out, frayed or pinched cables.
B. Remove the cover.
C. Power-off computer. Disconnect the power cord.
D. Don’t check for worn out, frayed or pinched cables.
____5. Mr. JD, a computer technician, conducted testing. He found out that if a
processor is intended to run with a HYPERTHREADING capabilities, then it
should work as expected.
What
basic method of testing did Mr. JD is using?
a. continuity test c. performance test
b. voltage or current test d. diagnostic test
____7. Technical report is any document that records the procedure from technical
activity or investigation.
What is NOT a good technical report?
a. Being concise c. Know the potentiality of the readers
b. Specific and itemized d. Long and detailed
Sometimes when the problem with a system is not totally apparent and the problem may
be intermittent, using a basic common diagnostic procedure may help determine what is
wrong.
____9.
What rule in diagnosing computer system when you educate oneself on all aspects and
operation of computer parts?
a. know your facts c. focus on replaceable units
b. use your commonsense d. Proper assembly and disassembly
____10. What type of current does the figure show in which a circuit has
an open path for current to flow?
a. closed circuit b. open circuit c. parallel circuit d. series circuit
ANSWER KEY
1. a 6. d
2. d 7. d
3. d 8. a
4. d 9. b
5. c 10. b
TABLE OF SPECIFICATION
Learning Percent No of Remembering Understanding Applyin Analyzing Evaluating Creatin Total
Competencies of Items g g
Items Easy Average Difficult
(50%) (30%) (10%)
LO 3: Test 20% 2 10 4 2
components
TLE_IACSS9-
12TECO-IVf-h-
26
LO 4: Evaluate 20% 2 8 9 2
the testing
process
TLE_IACSS9-
12TECO-IVh-j-
27
Total 100% 10 4 2 1 3 10
PERFORMANCE TASK
Directions: Analyze the situation carefully. Create a sample job order on a separate bond-paper with
A4 size. This will be compiled with your portfolio.
Assume you are the responsible personnel or the customer service representative of a
manufacturing company or a repair shop, and there comes a customer (a client) who claims a
warranty or needs a repair service of his desktop which does not turn ON and keeps on
beeping continuously.
After an interview with the client, you were able to record the details as follow:
The name of the customer is Mr. Rowel Avila. He lives in Poblacion, Bonifacio but the
defective unit is in his office at Bonifacio NHS, Liloan, Bonifacio, Mis. Occ. Mr. Avila’s number
is 0997-607-0691, but he is too busy to attend with the repair service, so he instructed one of
his staff named Arlyn Besana to assist the technician. The staff can be reached at 0910-177-
3320. These are the only details you got.
Create a job order for Mr. Avila, so the technician will know the details or specifics of the
job.
Note: Refer to the example of the job order form.
Scoring Rubric
TOTAL
Completeness The sheet must indicate the efficiency
of the tools and effectivity of the testing tools used 4
used. by the technician throughout the
entire procedure.
Completeness The sheet must indicate the
of the appropriateness of the testing
methods or methods and techniques applied by 4
techniques the technician throughout the entire
applied procedure.
Summary of The sheet must indicate the summary
the evaluation of the evaluation, including the 2
recommendations of the responsible
personnel or evaluator.
TOTAL
Noted by:
ALBERTO T. ALAVAREN, ED.D.
Principal III