Professional Documents
Culture Documents
TEC-2000671-WC INSTALACIONES-Almacen Pasto-750gpm@150PSI-DIESEL-HOR-ES-Rev0
TEC-2000671-WC INSTALACIONES-Almacen Pasto-750gpm@150PSI-DIESEL-HOR-ES-Rev0
PUMP:
Flow : 750 GPM
Head : 150 PSI
Type : Horizontal End-Suction
Manufacture : Waterfall Pumps Manufacturing
Model : WF-4X12 ESF
Speed : 3000 RPM
Listing : UL-Listed & FM Approved
Construction : Bronze Impeller, Ductile Iron casing
Accessories : Suction & Discharge Gauges, Fuel Tank, Batteries
with Cables, PRV, Waste Cone
ENGINE:
Type : Diesel Engine
Manufacture : Kirloskar
Model : KFP6R-UF26R2
Speed : 3000 RPM
Rating : 217.0 HP
Listing : UL Listed & FM Approved
CONTROLLER:
Type : Diesel Engine Controller
Manufacture : Firetrol
Listing : UL Listed & FM Approved
Supply : 220V/1Phase/50-60Hz
Enclosure : Nema 2
Phone:+971 4 26 333 25
Website: www.wfpumps.com
Email: info@wfpumps.com 2
Location: Dubai,UAE|P.O Box 446054
ITEM(2):Electric Motor Driven Jockey Pump QTY:1
PUMP:
Flow : 20 GPM
Head : 160 PSI
Type : Jockey Pump
Model : RV4-10
Speed : 3500 RPM
Construction : Stainless Steel/ Cast Iron
Accessories : Suction & Discharge Gauges
DRIVER:
Type : Electric Motor
Speed : 3500 RPM
Rating : 5.5 HP
Supply : 220-240V/3Phase/60Hz
Enclosure : TEFC
CONTROLLER:
Type : Jockey Pump Controller
Manufacture : Firetrol
Rating : 5.5 HP
Listing : UL Listed
Supply : 220-240V/3Phase/60Hz
Enclosure : Nema 2
Phone:+971 4 26 333 25
Website: www.wfpumps.com
Email: info@wfpumps.com 3
Location: Dubai,UAE|P.O Box 446054
Performance Curve WF-4X12 ESF
80 800
140
70 700
TOTAL HEAD (meters of head)
120 Rated
60 600
150% Rated
100
NPSH (m)
ɳ(%)
BHP
50 500
80
40 400
Min. 65% at 150% Rated
60
30 300
40
20 200
10 20 100
0 0 0
0 200 400 600 800 1000 1200 1400
FLOW (GPM)
----
A B C D E F G H
ENGINE A B C D
KFP4R-UF16R1/R2 2245.0 2000.0 444.5 1391.5
-A-
8 KFP6R-UF26R1/R2 2502.3 2200.0 435.0 1484.0 8
7 7
123+2.5
6
-2.5
TOP VIEW 6
A+10
-10
-A-
-A-
5 5
Ø100MM DISCHARGE
Ø253.5MM O.D FLANGE
8-Ø22 BOLTS 672+5
-5 475
ASME B16.42
CLASS 300
4 4
D+10
-10
-A- 317+2.5
-2.5
-A-
Ø125.5MM SUCTION
Ø279MM O.D FLANGE
C+5
-5
8-Ø22 BOLTS
3 ASME B16.42 3
CLASS 300
380+5
-5
760+10
-10
B+10
-10
PUMP PERFORMANCE
• Flow ranges from 50 GPM up to 1000 GPM
• Pressure ratings from 80 psi up to 309 psi
DESIGN FEATURES
• Underwriter Laboratories (UL) – 448
• Factory Mutual (FM) – 1319
• NFPA 20
www.wfpumps.com
CROSS SECTIONAL
1. PUMP CASING: Rugged heavy duty, integrally cast supports, volute type, centerline discharge and
self-venting. Back-pull-out design allows removal of bearing assembly and impeller without disturbing
the pipe connection. Provided with O-ring seals between pump casing and back cover to avoid any
leakage.
2. CASING WEAR RING: Standard enclosed impellers are designed with integral casing wear rings to
reduce end thrust.
3. IMPELLER: End suction type, enclosed, dynamically and hydraulically balanced prior to the assembly.
Impellers designed with back rings to minimize axial thrust. Impellers are firmly keyed and locked to an
accurately finished oversized shaft to absorb all shock loads.
4. BEARING HOUSING: Two anti-friction, grease lubricated stainless steel bearings selected to carry
design loads while offering higher life than specified by standards. Both the inboard and outboard
bearings are protected by lip seals to keep contaminants out of bearing.
5. LANTERN RING: Perforated hollow ring made of corrosion resistant material designed to allow flow of
cooling water uniformly around the shaft to provide lubrication and cooling.
6. GLAND PACKING: Packing rings selected to offer maximum tightness while allowing smooth and
friction free running of the shaft.
7. CASING COVER: Casing cover with integral stuffing box designed for maximum working pressure.
Stuffing box sized to house five rings of packing along with lantern ring.
8. SHAFT SLEEVE: Centrifugally cast renewable shaft sleeves protect the shaft from corrosion, packing
wear and are sealed to prevent leakage. Sleeves are accurately positioned and locked in place.
9. BEARING: Grease lubricated stainless steel radial and thrust bearings maintains impeller in their central
position. Bearings are selected to offer very high operating life.
10. SHAFT: Made of high strength alloy steel accurately machined and polished to a smooth surface. Sized
with a liberal safety factor to transmit full driver horsepower while offering minimum deflection in full
range operation.
1
7
5 9
8
4
6
10
KIRLOSKAR OIL ENGINES LIMITED
Engine Scope of Supply Basic Engine Model:
Kirloskar Oil Engines Limited KFP6R-UF26R2
Laxmanrao Kirloskar Road, Ref. No. : ESS - UF26R2 - 00
Khadki, Pune - 411003 (India)
Revision Date : 28.05.2018
Rev. Number : 00
KFP6R-UF26R2
OVERALL WIDTH - 932 MM
Equipment Standard Equipment Standard
Air Cleaner Direct Mounted, Disposable, Indoor Manual Start On Instrument Panel
Service with Drip shield Controls
Alternator 12V - DC, 35 AMPS, With Belt Guard Fuel Inj. System Direct Injection
Flywheel Housing S.A.E. #3 Governor & Speed Mechanical & Constant Speed
Flywheel Power S.A.E. 11.5" Fuel Stop Energize to Stop (ETS), 12V-DC
Take -off Solenoid
Engine Heater 240V-Ac, 2000 Watts Over speed On Instrument panel with Reset & Test
controls
Water Pump Vee Belt Driven with Belt Guard Starter Controls Dual Solenoids
Heat Exchanger Tube & Shell Type, 4.13 Bar, BSP Fuel Connection Metal tube with Fire Resistant Flexible
Connections & Fresh water compatible Supply & Return Lines
Instrument Panel Digital Panel with Tachometer - Exhaust Flex Mild Steel Flexible Bellow for Exhaust
Hourmeter, Volt meters(Two), Water Connection Connection
Temperature, Oil Pressure
Junction Box for On engine for AC supply wiring Exhaust Heat shield and Blanket on charge air
Engine Heater connection to Engine heater Protection cooler pipe
Switches Low Lub. Oil Pressure, Coolant High & Raw Water Automatic from engine Instrument
Low Temperature, Raw water High Solenoid Panel
Temperature, Low Raw water flow & Operation
Overspeed
Charge Air Cooler Tube & Shell Type with flange Raw water 1.25" Stainless Steel Cooling line with
Connections Cooling Loop flow alarm
Lube Oil Pump Gear Driven Starter 12V - DC
Lube Oil Filter Full Flow with By-Pass Valve Throttle Control Adjustable Speed Control
Lube Oil Cooler Engine Water Cooled, Plate Type Fuel Filter Primary Filter with Spin on type
Tool Kit Standard Tool kit
Page 1 of 1
Product FTA1100J
Description
CANADA
OF
S E
LAB RI
O R AT O
Tamaños 3" a 8" requerida por el sistema, abrir rápidamente para mantener una presión
2050B-4KG1KOL (Ángulo) controlada y cerrar gradualmente para lograr una operación libre de
fenómenos transitorios (golpes de ariete).
Aplicaciones Tipicas
Válvula de Alivio para Plataformas Marinas Válvula de Alivio de Bomba
para Instalaciones en Tierra
WC-1 2050B-4KG1KOL
Waste Cone
Pressure Relief Valve with
Anti-Cavitation Trim
Main
33A High Performance Gate
Combination Air Release Valve
& Vacuum Breaker Valve
Shut-Off
System
Blow-Off
581
Check Valve Tee and
Valve
FLOW
PO Box 1325 • Newport Beach, CA 92659-0325 • Ph: 949-722-4800 • F: 949-548-5441 • info@cla-val.com • www.cla-val.com
© Copyright Cla-Val 2014 Printed in USA Specifications subject to change without notice. SE-50B-4KG1KOL (R-11/2014)
WC-1
Waste Cone
MODEL
Standards: Flanges
• Fusion Bonded Red Epoxy Coated • 150# Class (FF Standard)
• Ductile Iron - ASTM A536-65 • 300# Class (RF Standard)
• (2) 2’’ 316 SS Sight Glasses per WC-1 • Raised Face and Flat Faced Options
• Single Body Casting (No Welding)
Typical Application:
Fire Pump Relief
CLA-VAL ©
1701 Placentia Avenue • Costa Mesa CA 92627 • Phone: 949-722-4800 • Fax: 949-548-5441 • E-mail: info@cla-val.com • Website cla-val.com
Copyright Cla-Val 2019 Printed in USA Specifications subject to change without notice.
WC-1
ØE ØG
EQUALLY EQUALLY
SPACED SPACED
Ø A Ø AA ØCC ØC
B
6" X 8" SIZE SHOWN
CLA-VAL
1701 Placentia Avenue • Costa Mesa CA 92627
800-942-6326 Fax: 949-548-5441 Web Site: cla-val.com E-mail: info@cla-val.com
CLA-VAL CANADA CLA-VAL EUROPE CLA-VAL UK CLA-VAL FRANCE CLA-VAL PACIFIC
4687 Christie Drive Chemin des Mésanges 1 Dainton House, Goods Station Road Porte du Grand Lyon 1 45 Kennaway Road
Beamsville, Ontario CH-1032 Romanel/ Tunbridge Wells ZAC du Champ du Périer Woolston, Christchurch, 8023
Canada L0R 1B4 Lausanne, Switzerland Kent TN1 2 DH England France - 01700 Neyron New Zealand
Phone: 905-563-4963 Phone: 41-21-643-15-55 Phone: 44-1892-514-400 Phone: 33-4-72-25-92-93 Phone: 64-39644860
E-mail sales@cla-val.ca E-mail: cla-val@cla-val.ch E-mail: info@cla-val.co.uk E-mail: cla-val@cla-val.fr www.cla-valpacific.com
E-WC-1 (R-03/2019)
E-mail: info@cla-valpacific.com
©COPYRIGHT CLA-VAL 2019 Printed in USA Specifications subject to change without notice.