ELSAP01D

You might also like

Download as doc, pdf, or txt
Download as doc, pdf, or txt
You are on page 1of 1

ASSOC.

PIP Data Sheet for Battery Chargers ELSAP01D


ELSAP01 for Station Batteries PAGE 1

Client       Engineering Org.       Spec. No.      

Project Title       Location       Date      


Project Location       Contract Number       Equip. No.      

Proj. No.       Specifier Name       Tele. No.      


P. O. No.      

Refer to Specification No. ELSAP01 for General Requirements


Applicable State and Local Codes:      

Data Provided by:  Buyer  Seller with Proposal  Seller after Order

Site Conditions: Additional Alarms Requirements (4.6.2):


Altitude       ft. Seismic Zone    AC Input Failure

Ambient Temperature: Max.     F Min.     F Charger Over-Temperature

Other       Overload Shutdown

Battery Type and Load Requirements: High Output Voltage


Lead-Calcium Lead-Antimony Equalize Charge Mode
Nickel-Cadmium Other       Battery End of Discharge
No. of Cells     Output Breaker Open

Capacity       Amperes for    Hours, Ground Fault Indication Meter (4.8.2)
to      Final Volts Per Cell (VPC) Enclosure (4.11):

Battery Recharge Time (to 90% Capacity) (4.1.4):    Hours Enclosure Type (4.11.1): Mfr. Std. Other      
External DC Load (Excluding Battery):     Amps Max. Cable Entry (4.11.6): Top Bottom

Duty Cycle Description:       Paint Finish (4.12): Mfr. Std. Other      
(attach diagram)
Nameplates (4.13):
Charge Ratings and Requirements: Nameplate Engraving:
AC Input (4.3.2):     Volts,    Phase,    Hz            

Available Short Circuit Current       Amps RMS Sym            
DC Output Rating     Volts Color: Black/White Other      

Battery Eliminator (4.3.6) Additional Testing Requirements (5.2):


DC Output Filtering (4.3.7): 30 mV 100 mV 200 mV      
Other            

Battery Temperature Compensation (4.3.11) Documentation (7.0):


Output Overcurrent Protection (4.3.16):  Electronic Document Format .DXF
Circuit Breaker Fused Disconnect Other      
Parallel Operation Required (4.3.17) Manufacturer to Provide:
Automatic Equalize Charging (4.4.3)    Reproducible Plus

   Copies of All Documentation Plus


   Copies of the Operating Manuals

Notes and Other Requirements:


     
     
     

You might also like