Professional Documents
Culture Documents
Manual - TF 1900SK 190
Manual - TF 1900SK 190
Manual - TF 1900SK 190
Instruction Manual
© TELIKOU Systems
All Rights Reserved
TELIKOU SKYLINE TF-1900 / SK-190 Wireless Intercom
I. Introduction
Thank you for choosing TELIKOU SKYLINE series wireless intercom products. TF-1900 / SK-190
system is not only a full duplex wireless party system, but also a wireless interface for all the wired
system. The system is suitable for occasions where mobile communication is required, such as TV
stations, communication centers, OB Van, live performance and engineering test sites.
The system adopts DECT technology. It has the characteristics of flexible configuration, simple
operation, stable and reliable performance, strong anti-noise, clear and loud voice quality, etc.
II. Features
1. Add wireless user end for wired system
2. Internal 2-wire/4-wire interface
3. Supports up to 32 pieces wireless belt packs
4. Belt pack can roam between different antennas.
5. Supports ISO function
6. Supports 4xAA rechargeable battery
III. Antenna
1. Receive
Adjust the audio level which received from belt pack
2. Transmit
Adjust the audio level which transmit to belt pack
3. Register
Belt pack should register with all antennas that belt pack may roam to.
1
TELIKOU SKYLINE TF-1900 / SK-190 Wireless Intercom
5. Antenna Address
Two digit code switch. In one area, there are four pieces TF-1900 can work together. Please
make sure follow the address diagram to set the TF-1900 antenna address.
7. Address Diagram
Follow this diagram to setup the TF-1900 antenna logical address.
9. Transmit Indicator
This indicator lights on when antenna transmitter is working.
2
TELIKOU SKYLINE TF-1900 / SK-190 Wireless Intercom
1 8 1 8
0 0
Orange 橙白
White 橙白
Orange White
橙
Orange 橙
Orange
Green 绿白
White 蓝
Blue
蓝Blue 绿白
Green White
Blue 蓝白
White 绿
Green
绿
Green 蓝白
Blue White
Brown 棕白
White 棕白
Brown White
棕
Brown 棕
Brown
屏蔽
Shield 屏蔽
Shield
3
TELIKOU SKYLINE TF-1900 / SK-190 Wireless Intercom
2. Mic Button
Touch button with two operating mode
l PTT: Push to talk
l Latch: Pressing time is less than 200ms, the switch is turned on and locked. Press again to
unlock the switch.
4
TELIKOU SKYLINE TF-1900 / SK-190 Wireless Intercom
R
T
S
R : Earphone +
T : Earphone -
S : GND
4. Micro-USB Connector
Charging port. If the belt pack has a Ni-MH/Ni-Cd rechargeable battery, you can connect a 5v
adapter to charge it.
5. Headset Connector
XLR-5M connector
Pin 1 --- Mic -
Pin 2 --- Mic +
Pin 3 --- Ear -
Pin 4 --- Ear +
Pin 5 --- GND
6. ISO Button
Press and hold the button. The belt pack makes an isolated conversation with ISO target belt
pack. Release the button, the ISO conversation is finished.
7. LCD Screen
l Display content:
n Registered antenna number, Current working antenna number and Signal field
strength
n Battery Power
n Working Frequency
n Belt Pack Label (BP-1, BP-2, BP-3, BP-4,BP-5, BP-6,...,BP-16 )
n ISO Target Label ( ISO: Null, BP-1, BP-2, BP-3, BP-4,BP-5, BP-6,...,BP-16)
l Setting Menu
Hold the Mic button and press power button will enter setting menu. LCD screen displays
menu. Rotate the power and volume encoder to move the cursor. When the cursor is on an
5
TELIKOU SKYLINE TF-1900 / SK-190 Wireless Intercom
option, press the power and volume encoder to enter the option. Rotate the power and
volume encoder to Change parameters.
n Language: English or Chinese
n ISO Set: Base and other belt packs which under same antenna
n Mic Gain: Volume 1 ~ Volume 16
n Frequency: select 1.8G or 1.9G first, then select country or area.
n Registration: Register belt pack to antenna
n Label: BP-1, BP-2, BP-3, BP-4,BP-5, BP-6,...,BP-16
n Reset: When the belt pack can not work normally due to problems such as
registration, you can use this function to clear the registration information and restore
the factory settings.
n Save&Exit: Save change and exit
n Exit: Exit without save any change
8. Roaming
Every belt pack can be paired with four antennas. Belt pack shows the antenna number (1-4)
which are already paired on LCD screen. Belt pack can roam among these antennas. Press
and
rotate the power and volume encoder can switch antenna manually.
V Technical Parameters
1. Power:
4xAA Battery or 4xAA Rechargeable Battery
2. Standby Time:
Over 72 hours
3. Working Time:
Over 10 hours
4. Charging:
Micro-USB 5VDC
5. Frequency
1.8G Channel
Channel Transmit Receive
0 1897.344 1897.344
1 1895.616 1895.616
2 1893.888 1893.888
3 1892.160 1892.160
4 1890.432 1890.432
5 1888.704 1888.704
6
TELIKOU SKYLINE TF-1900 / SK-190 Wireless Intercom
6 1886.976 1886.976
7 1885.248 1885.248
8 1883.520 1883.520
9 1881.792 1881.792
1.9G Channel
Channel Transmit Receive
0 1921.536 1921.536
1 1923.264 1923.264
2 1924.992 1924.992
3 1926.720 1926.720
4 1928.448 1928.448
8. Size
TF-1900 Antenna: 130 x 110 x 45mm(without antenna), 160 x 110 x 200mm(with antenna),
7
TELIKOU SKYLINE TF-1900 / SK-190 Wireless Intercom