Download as pdf or txt
Download as pdf or txt
You are on page 1of 9

924K Small Wheel Loader HJF00001-UP (MACHINE) POWERED BY C7.1 Engine(SE...

Page 1 of 9

Shutdown SIS

Previous Screen

Product: WHEEL LOADER


Model: 924K WHEEL LOADER HJF
Configuration: 924K Small Wheel Loader HJF00001-UP (MACHINE) POWERED BY C7.1 Engine

Systems Operation
924K, 930K and 938K Wheel Loaders InstrClstr/CMPD Monitoring
Media Number -UENR0291-02 Publication Date -01/08/2014 Date Updated -27/08/2014

i04720384

Instrument Cluster
SMCS - 7490

Illustration 1 g02478577

(1) Left Turn Signal

(2) Right Turn signal

(3) Implement Float Active

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 07/09/2022
924K Small Wheel Loader HJF00001-UP (MACHINE) POWERED BY C7.1 Engine(SE... Page 2 of 9

(4) Primary Steering Failure

(5) Differential Lock

(6) High Beam

(7) Quick Steer Active

(8) Quick Coupler

(9) Parking Brake

(10) Ride Control Active

(11) Action Lamp

(12) Engine Warning

(13) Starting Aid Active

(14) Air Filter Blocked

(15) Low Fuel

(16) Water in Fuel

(17) Transmission Filter Bypass

(18) Charging System Failure

(19) Hydraulic Filter Bypass

(20) Engine Coolant Temperature

(21) Engine RPM

(22) Fuel Level

(23) LCD Display

(24) Hydraulic Oil Temperature

Note: When any of the indicator lights turn on, check the Secondary Display for the detailed
information about the fault. The monitoring system will identify the error in the Secondary display.

Left Turn Signal - Alert indicator (1)


will flash when the left turn signal is
activated.

Right Turn signal - Alert indicator (2)


will flash when the right turn signal is
activated.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 07/09/2022
924K Small Wheel Loader HJF00001-UP (MACHINE) POWERED BY C7.1 Engine(SE... Page 3 of 9

Implement Float Active - Alert


indicator (3) will light when float is
active.

Primary Steering Failure - Alert


indicator (4) will light and an audible
alarm will sound when the primary
steering oil pressure is low. Immediately
pull the machine to a convenient stop.
Stop the engine. Do not operate the
machine until the fault has been
corrected.

Note: If the machine is equipped with secondary steering, when you turn the engine start switch key
to the ON position, the alert indicator for the primary steering will light for 3 seconds. If the alert
indicator for the primary steering does not light, investigate the cause. Do not operate the machine
until the fault has been corrected.

Differential Lock - Alert indicator (5)


will light when the differentials are
locked.

High Beam - The alert indicator (6)


will light when the high beams are on.

Quick Steer Active - Alert indicator


(7) will light when the Quick Steer is
active.

Quick coupler - Alert indicator (8) will


light when the Quick coupler is
disengaged.

Parking Brake - Alert indicator (9) will


light when the parking brake is engaged.
An audible alarm will sound when the
parking brake is engaged and the
transmission is put into forward or
reverse. The alert indicator should go
out when the parking brake is released.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 07/09/2022
924K Small Wheel Loader HJF00001-UP (MACHINE) POWERED BY C7.1 Engine(SE... Page 4 of 9

Ride Control - Alert indicator (10) will


light when the ride control is activated.
The light will be green when ride
control is active or in automatic mode.
The light will be off when ride control
is deactivated.

Action Lamp - Alert indicator (11) will


light in order to inform the operator of a
malfunction in the operating system.

Engine Warning - Alert indicator (12)


will light when the engine warning is
activated.

Starting Aid Active - Alert indicator


(13) will light when the glow plugs or
ether (if equipped) are activated during
engine starting. Refer to the Operation
and Maintenance Manual, "Engine
Starting" for more information.

Air Filter Blocked - Alert indicator


(14) will light when the engine air filter
needs to be cleaned or changed.

Low Fuel - Alert indicator (15) will


light when the fuel level is below 25%.

Water in Fuel - Alert indicator (16) will


light when there is water in the fuel.

Transmission Filter Bypass - Alert


indicator (17) will flash when a
transmission filter bypass occurs. The
transmission filter needs to be replaced.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 07/09/2022
924K Small Wheel Loader HJF00001-UP (MACHINE) POWERED BY C7.1 Engine(SE... Page 5 of 9

Charging System Failure - Alert


indicator (18) will light when there is a
malfunction in the electrical system.

Hydraulic Filter Bypass - Alert


indicator (19) will light when the
hydraulic system warning is activated.

Gauge Panel

Coolant Temperature - Gauge (20)


indicates the temperature of the engine
coolant.

Tachometer - Gauge (21) indicates the


engine speed.

Fuel Level - Graph (22) indicates the


level of fuel that is in the fuel tank.

Hydraulic Oil Temperature - Gauge


(24) indicates the temperature of the
hydraulic oil.

LCD Display - The LCD display (23)


provides a display area for functions of
the machine.

LCD Display
The LCD display will notify the operator the following:

• Service Hours

• MSS

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 07/09/2022
924K Small Wheel Loader HJF00001-UP (MACHINE) POWERED BY C7.1 Engine(SE... Page 6 of 9

• Fuel Level

• Direction

• Ground Speed

ICONS IN THE PREMIUM VALUE DISPLAY

Illustration 2 g02831220

MSS

This icon will appear if the MSS is installed and at startup, with the key on and engine off, a non-
validated or unrecognized key is installed. This icon will display for five seconds or until proper MSS
key is validated.

Illustration 3 g02831221

Engine Idle Shutdown

This icon will appear if the machine is idle and auto shutdown is initiated.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 07/09/2022
924K Small Wheel Loader HJF00001-UP (MACHINE) POWERED BY C7.1 Engine(SE... Page 7 of 9

Illustration 4 g02831226

Delayed Engine Shutdown

his icon will appear on key off if delayed engine shutdown is initiated.

Illustration 5 g02831228

Secondary Steering Failure

This set of icons will appear if primary steering fails and secondary steering is activated.

Illustration 6 g02831230

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 07/09/2022
924K Small Wheel Loader HJF00001-UP (MACHINE) POWERED BY C7.1 Engine(SE... Page 8 of 9

Brake Accumulator Warning

This icon will appear if the brake accumulator is low.

Illustration 7 g02831236

Secondary Steering Test Active

This set of icons will appear if the secondary steering system is being tested.

Illustration 8 g02831244

Parking brake Test Active

This set of icons will appear if the parking brake system is being tested.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 07/09/2022
924K Small Wheel Loader HJF00001-UP (MACHINE) POWERED BY C7.1 Engine(SE... Page 9 of 9

Illustration 9 g02831257

Service Brake Test Active

This set of icons will appear if the service brake system is being tested.

FUNCTIONAL TEST
The battery disconnect switch must be in the ON position.

When you turn the engine start switch key from the OFF position to the ON position, the Caterpillar
monitoring system will perform an automatic self-diagnostic test.

The self-diagnostic test verifies that the outputs (gauges and alert indicators) are operating correctly.

When you turn the engine start switch key to the ON position, the following systems are tested for
approximately one second: Alert indicators, Gauges, and LCD displays

The gauges must go to the far right positions. All alert indicators must come on momentarily. All
segments of the LCD displays must come on momentarily.

Copyright 1993 - 2022 Caterpillar Inc. Wed Sep 7 22:43:34 CDT 2022
All Rights Reserved.
Private Network For SIS Licensees.

https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb... 07/09/2022

You might also like