Professional Documents
Culture Documents
Project Documentation Format
Project Documentation Format
By
Suhaib Ansari
2012-GCUF-12344
Suhaib Ansari
2012-GCUF-12344
BACHOLAR OF SCIENCE
IN
INFORMATION TECHNOLOGY
April 2018
1
DECLARATION
The work reported in this thesis was carried out by me under the supervision of Mr.
Shahbaz Nazeer Department of Information Technology GC University, Faisalabad,
Pakistan.
I hereby declare that the title of thesis PROJECT TITLE IN BOLD and the contents of
thesis are the product of my own research and no part has been copied from any published
source (except the references, standard mathematical or genetic models /equations
/formulas/protocols etc). I further declare that this work has not been submitted for award
of any other degree /diploma. The University may take action if the information provided
is found inaccurate at any stage.
2
3
CERTIFICATE BY SUPERVISORY COMMITTEE
We certify that the contents and form of thesis submitted by Ms. Suhaib Ansari
Registration No: 2012-GCUF-01234 and by Ms. Suhaib Ansari Registration No: 2012-
GCUF-01234. Has been Found satisfactory and in accordance with the prescribed format.
We recommend it to be processed for the evaluation by the External Examiner for the
award of Degree.
4
DEDICATED
TO
&
5
ACKNOWLEDGEMENTS
All praise to ALMIGHTY ALLAH, the most merciful and the most
compassionate and his Holy Prophet ‘MUHAMMAD’(Peace) be upon him) the most
perfect and exalted among and even born on the surface of earth, who is, forever a torch
of guidance and knowledge for the humanity as a whole.
The work presented in this manuscript was accomplished under the inspiring
guidance, gorgeous assistance, constructive criticism and enlightened supervision of Mr.
Shahbaz Nazeer Department of Information Technology GC University, Faisalabad for
his skilful guidance, constructive criticism, masterly advice, valuable suggestions and
sympathetic behaviour for the completion of this manuscript.
Words are very important to convey thoughts and thanks, the words are
impossible to find to thank our Father and whole family for their prayers and
encouragement for us and for our work.
Finally, I apologize if I have caused anger of offence to anybody and the errors
that remain in the manuscript are mine alone.
SUHAIB ANSARI
SUHAIB ANSARI
6
Table of Contents
Introduction
1.1 Background
1.2 Overview.…………………………………………………………………….
2 Requirements Specification
2.1 Non-functional Requirements
2.2.1 Category 1
2.2.2 Category 2
2.2.3 Category 3
2.2.4 Category 4
3 Analysis
3.1 Domain Model
3.2 Stakeholders
7
4 Project Design
4.1 Methodology
4.3.1 Module 1
4.3.2 Module 2
4.3.3 Module 3
5 Implementation
5.1 Development Stages
6 Testing
6.1 Unit Testing
6.3 Results
8
IV. Typing Directions:
Good quality white bond paper of the size A4 size must be used.
One inch broad margin must be on each side except the left side margin which
should be 1.25 inch.
No header footer used while typing no extra margin should be left within the
marked margin.
“New Times Roman” writing font style is the recommended throughout the
Project.
The main headings font size should be 16 and capital while for the sub heading
and general text should be 14 and 12 respectively.
All pages must be numbered. Pages of abstract and Acknowledgements should
bear Roman numbers (i, ii, iii, iv, v, vi etc), whereas pages from introduction
onward should be given Arabic numbers (1, 2,3,4,5 etc,).in the centre of the page
at bottom.
Red Colour Text used in format is just to highlight….