Professional Documents
Culture Documents
Warning: Quick Start Guide
Warning: Quick Start Guide
WARNING To prevent serious injury, read manual warnings and instructions before use.
Knob
Install FLUX-CORE
wire spool.
Spring
Insert wire through
both wire liners and
Top Plate
clamp it into feed
mechanism.
Wire Spool welding
See manual if
changing wire size. wire Wire
Spindle Spool
2"
Take off nozzle and tip,
plug in welder, turn it on, Contact
Tip
WARNING and squeeze trigger until
wire comes out. Nozzle
To prevent fire and
serious injury:
Keep torch and
wire clear of
grounded objects 0″
Incrementally tighten
.03
2"- 3
wire will bend from
"
feed tension at 2"-3". wood
clockwise GUN
block
90 AMP FLUX WIRE WELDER
ITEM 68887
according to chart.
Capacity 18 Ga. – 3/16″ Steel Plate
Weldable Mild, Low Alloy Steel
Materials (Not for Aluminum or Stainless Steel)
GUN GROUND
120V~
60Hz
20A
O
OFF MAX
Specifications
WIRE FEED SPEED Wire 0.030″- 0.035″ Flux-Core
Capacity 18 Ga. – 3/16″ Steel Plate
Weldable Mild, Low Alloy Steel
Materials (Not for Aluminum or Stainless Steel)
GROUND
17e
BASIC WELDING INSTRUCTIONS AND WELDING TIPS ARE IN MANUAL. 120V~
60Hz
20A
63583 WELD EXAMPLE PICTURES
CLEAN WELDS FIRST!
Flux-core welds will have a coat of slag over them until cleaned.
Current
GUN
Weld Weld
Good Current Too High or Stickout
Speed Speed
Weld Too Low Wire Feed Too Long
Too Fast Too Slow
GUN Too Fast
90 AMP FLUX WIRE WELDER
ITEM 68887
O
ON MIN
OFF MAX maintain
I
Specifications 90 AMP FLUX WIRE WELDER
Wire 0.030″- 0.035″ Flux-Core
WIRE FEED SPEED ITEM 68887 less
O Capacity 18 Ga. – 3/16″ Steel Plate
Weldable Mild, Low Alloy Steel
Materials (Not for Aluminum or Stainless Steel)
or weld weld
OFF MAX than 1/2"
Specifications GROUND ON MIN slower faster stickout
WIRE FEED SPEED Wire 0.030″- 0.035″ Flux-Core
Capacity 18 Ga. – 3/16″ Steel Plate 120V~
I
Weldable Mild, Low Alloy Steel 60Hz
Materials (Not for Aluminum or Stainless Steel)
20A
O
GROUND
120V~ OFF MAX
60Hz Specifications
20A WIRE FEED SPEED Wire 0.030″- 0.035″ Flux-Core
Capacity 18 Ga. – 3/16″ Steel Plate
Weldable Mild, Low Alloy Steel
Materials (Not for Aluminum or Stainless Steel)
GROUND