Professional Documents
Culture Documents
Sharpen (8X) : 1 1 Plate T 1.5
Sharpen (8X) : 1 1 Plate T 1.5
Date
1 Increased size of slots CBg CBg 2020-02-07
Sharpen (8X)
42(6X) 1,5
R2(18X)
245
42(7X)
60(3X)
A
95(2X)
140,5
7(28X)
40,3
33,3
25 5,5(8X)
20
15
8
0 R10(2X)
R2(32X)
12(7X) R30(8X) 30(8X)
0
5
18
33
48
52,6
54
55,4
70
290
355
360
Edge
30
°
Note!
IF Applicable: General tolerances for machined parts, unless otherwise stated, according to EN ISO 2768-1-mK.
A-A (2 : 1) IF Applicable: General tolerances for welded parts, unless otherwise stated, according to EN ISO 13920-AE
IF Applicable: Welding splatter on smooth surfaces shall be removed. If applicable; before surface treatment.
All sharp edges and burrs shall be removed.
CBg 2019-06-26
Approved Date
This document and its contents
BCC AB
Profilgatan 15 is our exclusive property and CBg 2020-02-07
261 35 Landskrona must not be copied, reproduced, Drwg.No.
transmitted or communicated to Rev.
Sweden
340-01238 1
Phone +46 (0)418 44 99 20 any other party or used
Internet: www.bccab.com for purposes not expressly
permitted by us.