TECHNICAL DATA SHEET

CHOPPED STRAND MAT

Introduction
Chopped strand mat are consisting of glass strands chopped to lengths of mostly 50 mm and held together by a
binder which is soluble in styrene. The binder content may vary from 3 to 5%, depending on the requirements in
terms of processing of the mat and the characteristics of the finished product. Chopped strand mat is particularly
suited to contact moulding and to continuous moulding between layers of film. The final products are: boats,
handly-lay-up FRP, automobile parts, bathtube, etcc.

Properties:
Uniform thickness
Easy wet-out in resins
Good mold conformability
High wet-strength retention

Specification:
Weight 225 300 450 600 +/-5%
Fiber Chopped length 50mm
Solvability of powder into resin 20 second +/-5
Sizing Silane
Filament Diameter 11-13
Bonder Content--Emulsion(%) 4.0 +/- 0.5
Bonder Content--Powder(%) 4.0 +/- 0.5
Moisture Content(%) < 0.10
Width (mm) 1040-- 3200mm
Package weight(kg) According the spc.
Remark: Special products are available according to customer’s requirement.

Packing:
The packing is according customer’s requirement.
Each roll with a plastic bag and carton.
____________________________________________________________________________________
AMP composites Ltd.
Add:East Room 201 SanXin XinTianDi,ZhenXing East Road, TongXiang ZheJiang China 314500
TeL: 0086 573 88131566 8131066 Fax: 0086 573 88132566
E mail: sales@ampcomposites.com Web: www.ampcomposites.com