Professional Documents
Culture Documents
IB200 Datasheet 110 E0
IB200 Datasheet 110 E0
EN 50131-1
EN 50131-3
EN 50130-5
I-BUS ISOLATORS
In the IB200/P and IB200/U versions, the isolator protects and regenerates the BUS data signals. In the IB200/A version, the
isolator protects and regenerates the BUS data signals and the power supply.
The isolator allows the confinement of problems caused by malfunction on a downstream branch to that branch only, thus
not allowing malfunctions to affect the upstream branch. The isolator also makes it possible to extend the BUS length thanks
to the signal regeneration function.
The IB200/A is very useful when it is necessary to protect peripheral devices located in unprotected areas against vandalism. If
a device is damaged and BUS functionality is compromised, the isolator, once properly installed within the protected area, will
guarantee the proper functioning of the rest of the system.
80
46.5
97
126 27
27 172 9 83 14
IB200/A - back
64
67.7 65.7
IB200
EN 50131-1
EN 50131-3
EN 50130-5
CONNECTION DIAGRAMS
IB200/U, IB200/P
Control panel Cable length Maximum num-
BUS speed downstream of ber of cascaded
ISOLATE
the isolator isolators
Uncut 38.4kbps 500m 9
jumpers
125kbps 350m 6
I-BUS I-BUS 250kbps 200m 2
upstream downstream
IB200/U, IB200/P
Control panel
ISOLATE
Cut
jumpers
I-BUS I-BUS
upstream External downstream
power
supply 13.8V
IB200/A
Control panel
ISOLATE
ORDER CODES
DCSTINE0IB200-110-20200630