Professional Documents
Culture Documents
Aehq6353-00 797F
Aehq6353-00 797F
Aehq6353-00 797F
797F XQ
MINING TRUCK
FEATURES:
Caterpillar design control of all major components creates a hauling unit High Performance Engine. The Cat ® C175-20 engine offers the perfect
that delivers the best combination of high production, availability and balance between power, robust design and economy.
payload in combination with lower sound levels for less impact to the Power Shift Transmission. Electronic Clutch Pressure Control (ECPC)
environment and communities. gives the 797F seven speed transmission smooth shifts while providing
constant power and efficiency for peak powertrain performance.
The Cat ® 797F XQ (Extra Quiet) continues the tradition of Caterpillar’s
proven 797 Truck with high productivity and lowest in class cost per ton. Enhanced Serviceability. Designed with improved serviceability points
and grouped service locations so more time is spent on the haul roads
The 797F XQ features the following:
and less time in the shop.
Safety and Sustainability has been enhanced. Safety is top priority.
Reliable Mechanical Drive System. The Cat mechanical drive power
Spectator Sound Levels have been lowered by as much as 9 dB(A) train provides unmatched operating efficiency.
when measured in accordance with the Caterpillar NVT121 Sound
A Variety of Cat Truck Bodies are available including four MSD II
Testing Standard.
(Mine Specific Design) body options in conjunction with a configurable
Sound Suppression Equipped. The XQ comes with a larger muffler, liner system to achieve the most efficient hauling solutions at the
engine sound suppression panels, engine enclosure panels and other lowest-cost-per-ton.
equipment to suppress sound.
Specifications
Engines Operating Specifications
Engine Model Cat C175-20 Nominal Payload Capacity 363 tonnes 400 tons
Gross Power – SAE J1995 2983 kW 4,000 hp Heaped SAE (2:1) Capacity 240-267 m3 314-350 yd3
Net Power – SAE J1349 2828 kW 3,793 hp Top Speed – Loaded 67.6 km/h 42 mph
Bore 175 mm 6.9 in Steer Angle 40 Degrees
Stroke 220 mm 8.7 in Machine Clearance Turning Diameter 42 m 138 ft
Displacement 106 L 6,469 in3 Refer to the Cat Mining Truck 10-10-20 payload policy for maximum
Power ratings apply at 1,750 rpm when tested under the specific
gross machine weight limitations.
conditions for the specified standard.
Chassis weight with 100 percent fuel, hoist, body mounting group,
rims and tires.
797F XQ Mining Truck
Final Drives
Differential Ratio 1.3:1
2
Double-reduction, planetary, with full floating axles.
3
13
12
Suspension 11
14
15
Effective Cylinder Stroke – Front 313.6 mm 12.3 in 10
16
9
Rear Axle Oscillation ±4.0 degrees 1
8 17
Body Hoists 7
5 6
Pump Flow – High Idle 1200 L/min 317 gal/min 4
Tires
Tire 59/80R63 – Michelin or Bridgestone
Productive capabilities of the 797F are such that, under certain job
conditions, TKPH (TMPH) capabilities of standard tires could be
exceeded and, therefore, limit production.
STANDARD EQUIPMENT
ANTIFREEZE
Extended Life Coolant to –35° C (–30° F)
Standard equipment may vary. Consult your Cat dealer for details.
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com AEHQ6353 (07-11)
© 2011 Caterpillar
All Rights Reserved
Printed in U.S.A.
Materials and specifications are subject to change without notice. Featured machines in photos may include additional
equipment. See your Cat dealer for available options.
CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as
well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.