This document is a statement of competency from the Directorate General of Air Communications that certifies an individual's ability to perform maintenance on turbine engines. It lists 19 tasks related to turbine engine maintenance including daily inspections, installing and adjusting fuel and ignition components, performing rigging and testing of the propeller, and conducting a hot section inspection and engine run up. The supervisor certifies that the individual mentioned has met the requirements of the Civil Aviation Safety Regulations to perform these maintenance tasks.
This document is a statement of competency from the Directorate General of Air Communications that certifies an individual's ability to perform maintenance on turbine engines. It lists 19 tasks related to turbine engine maintenance including daily inspections, installing and adjusting fuel and ignition components, performing rigging and testing of the propeller, and conducting a hot section inspection and engine run up. The supervisor certifies that the individual mentioned has met the requirements of the Civil Aviation Safety Regulations to perform these maintenance tasks.
This document is a statement of competency from the Directorate General of Air Communications that certifies an individual's ability to perform maintenance on turbine engines. It lists 19 tasks related to turbine engine maintenance including daily inspections, installing and adjusting fuel and ignition components, performing rigging and testing of the propeller, and conducting a hot section inspection and engine run up. The supervisor certifies that the individual mentioned has met the requirements of the Civil Aviation Safety Regulations to perform these maintenance tasks.
• DIRECTORATE GENERAL OF AIR COMMUNICATIONS STATEMENT OF COMPETENCY
DIRECTORATE OF AIRWORTHINESS CERTIFICATION (TURBINE ENGINE - A4)
NO. DESCRIPTION DATE TYPE OF AIRCRAFT & SIGNATURE OF SUPERVISOR! REMARKS
REGISTRATION AME Lie. No. 1. Perform Daily Inspection of moter turbine and propeler
2. Install and adjust fuel control.
3. Install and adjust fuel pump.
4. Install and adjust flow meter.
5. Install heat excharger.
6. Install ignition unit.
7. Reinstall ignitor plug.
8. Adjust idle RPM
9. Adjust maximum RPM
10. Adjust Exhaust Gas Temperature (EGT)
11. Test E.G. T indicating system
12. Reinstall starter
13. Reinstall generator
14. Reinstall proppeler and proppeler regulator component
15. Perform rigging on proppeler control
16. Test proppeler performance after minor repair.
17. Perform Hot Section Inspection (HSI)
18. Perform engine run up
19. Perform safety precaution
I Name I hereby certify that the person mentioned above has been met Address .. ... , .. Jakarta. to the requirements of the CIVI AViation Safety Regulation ..... . . .. . .. (CASR) Part 65 Place & Date of Birth ... Deputy Director of Mamtenance Control Head of Oualityllnspector Company . ..... ......... ...... .. . ... . .... ..... ...... .... ..... - ...