Professional Documents
Culture Documents
20011.0010 - System For Serial Number SN
20011.0010 - System For Serial Number SN
0010
Issued by Authorized by Valid from Page Edition
TLL MAO 2018-12-07 1(5) 11
Serienummer-, S/N-systemet
System for serial number, S/N
INNEHÅLL CONTENTS
1 Allmänt 1 General
2 Märkning 2 Marking
3 Serienumrets, S/N uppbyggnad 3 Structure for serial number, S/N
4 Nummeruttagsansvar 4 Number registration responsibility
5 Dokumentering 5 Documentation
6 Montering 6 Assembly
7 Eftermarknad 7 Aftermarket
8 Trucktyp 8 Truck type
9 Märkning av truckar 9 Markings of trucks
1 ALLMÄNT 1 GENERAL
Denna standard ger This standard gives
- anvisningar för numrering av nedan nämnda enheter - instruction for numbering of mentioned units below
när registrering sker i ERP-systemet LN6. when registration is done in the ERP-systems LN6.
Föregående T-nummersystemet i CICS enligt Previous System for serial number, T-number in CICS
K-standard 20011.0002. according to K-standard 20011.0002.
- riktlinjer till övriga nödvändiga insatser i anknytning - guidelines for other necessary work in connection to
till rutinen. the routine.
Varje truck och egenkonstruerade aggregat tillverkat på Every truck and self-designed attachment manufactured at
Kalmar skall definieras och kunna identifieras med ett Kalmar shall be defined and identified with a serial number,
serienummer, S/N. Observera att all lyftutrustning som S/N. Observe that all lifting equipment hanging on the
hängs på vagn eller gaffel exklusive gafflar, inverterade carriage or forks excluding the forks, inverted forks and
gafflar och förlängningsgafflar definieras som aggregat. extension forks are defines as attachment.
Kompletta lyftkrokar till Reachstacker räknas också som Complete lift hooks to Reachstacker are also defined as
aggregat. attachment.
2 MÄRKNING 2 MARKING
Truckens och aggregatets serienummer, S/N skall finnas The serial number, S/N of the truck and attachment shall be
angivet på respektive Maskinskylt. specified at respective Machine plate.
A 101 00001
Löpnummer/Serial number, avsnitt/section 3.3
Trucktyp/Truck type, avsnitt/section 3.2
MAU, Multi Assembly Unit, avsnitt/section 3.1
K-Standard 20011.0010
Issued by Authorized by Valid from Page Edition
TLL MAO 2018-12-07 2(5) 11
Serienummer-, S/N-systemet
System for serial number, S/N
3.1 MAU, MULTI ASSEMBLY UNIT 3.1 MAU, MULTI ASSEMBLY UNIT
MAU bildas av en (1) bokstav med följande betydelse: MAU is formed with one (1) letter with following meaning:
Andra (2) och tredje (3) siffran är tilläggskod som tas ut Second (2) and third (3) digit is additional code which is
enligt löpnummerprincipen. used according to serial number principle.
Aktuell förteckning över de olika trucktyperna specificeras i Current list over the different truck types are specified in
avsnitt 8. section 8.
Då en trucktyp som inte finns med i avsnitt 8 skall tillverkas When a truck type shall be manufactured and is not listed in
section 8
- informerar projektledare eller Chief Engineer eller - inform the project leader or Chief engineer or Product
Product Business management, Business management,
Product Safety/Standard den nya produkttypen och Product Safety/Standard about the new product type
aktuell MAU and current MAU
K-Standard 20011.0010
Issued by Authorized by Valid from Page Edition
TLL MAO 2018-12-07 3(5) 11
Serienummer-, S/N-systemet
System for serial number, S/N
- registrerar Product Safety/Standard ny trucktyp och - The Product Safety/Standard registers the new truck
meddelar LCA (Local Change Administrator) på type and inform LCA (Local Change Administrator) at
aktuell MAU the current MAU
- LCA på aktuell MAU registrerar den nya - LCA at the current MAU registers the new number
nummerserien series
Löpnumret för egenkonstruerade aggregat registreras i The Serial numbers for self-designed attachment is recorded
kontrollprotokollet av ansvarig testare vid leverans. in the check protocol by responsible test officer at delivery.
5 DOKUMENTERING 5 DOCUMENTATION
5.1 SERIAL END ITEM 5.1 SERIAL END ITEM
Serienummer, S/N för till trucken hörande externa aggregat Serial number, S/N to the truck belonging external
skall registreras i LN6 – ”Serial End Item”. Detta skall attachment shall be registered in LN6 – “Serial End Item”.
göras av ansvarig testare vid slutkontrollen. This shall be done by responsible test officer at the final
check.
Serienummer, S/N för egenkonstruerade aggregat Serial number, S/N to the self- designed attachment
(Trucktyp 901) skall registreras i kontrollprotokollet. Detta (Trucktype 901) shall be registered in the check protocol.
skall göras av ansvarig testare vid slutkontrollen. This shall be done by responsible test officer at the final
check.
Förteckning över komponenter med spårbarhetskrav, se List of components with traceability requirement, see
K-standard 20011.0007. K-standard 20011.0007.
6 MONTERING 6 ASSEMBLY
Kontroll av serienummer, S/N görs löpande under Control of serial number, S/N is continuously conducted in
monteringsprocessen. the assembly process.
7 EFTERMARKNAD 7 AFTERMARKET
Vid reservdelsbeställningar av serienumrerade, S/N Aftermarket shall ensure that the correct number is reported
aggregat skall eftermarknaden säkerställa att rätt nummer to Supplier, when spare part orders are placed for serial
meddelas Leverantör. numbered, S/N attachment.
K-Standard 20011.0010
Issued by Authorized by Valid from Page Edition
TLL MAO 2018-12-07 4(5) 11
Serienummer-, S/N-systemet
System for serial number, S/N
8 TRUCKTYP/TRUCK TYP
PRODUCT LINE RST (REACHSTACKERS) PRODUCT LINE FLT LIGHT DIESEL, GASOL/LPG
PRODUCT LINE FLT HEAVY INKL. /INCL. LCH PRODUCT LINE FLT LIGHT EL/ELECTRIC
201 DCD 200 – 250 (DCD280-520) 601 ECE 50 - 90L Inkl. /Incl. C
202 DCE 280 - 330 RoRo 602 ECF 50 - 90L Inkl. /Incl. C
203 DCF 280 – 330 (DCE 300 – 330) 603 ECG 50 - 90L Inkl. /Incl. DCG70C
204 DCF 370 - 520
205 DCF 360 –410GS GS = Gantry Topplyft
206 DCF 180 - 250
207 DCG 180-330
208 DCG 600-720
209 DCG380-540
210 DCG330-410GSx/y
TILLBEHÖR/ACCESSORIES
AGGREGAT/ATTACMENT
Aktuella trucktyper i produktion = fet stil och inramade. /Current truck type in production = bold font and bordered.
K-Standard 20011.0010
Issued by Authorized by Valid from Page Edition
TLL MAO 2018-12-07 5(5) 11
Serienummer-, S/N-systemet
System for serial number, S/N
1)
Produktbeteckning enligt K-standard 20017.0001 1)
Product type designation according to K-standard
20017.0001