Professional Documents
Culture Documents
VIPER XTREM + Threaded Stud ZN 8.8 HDG 8.8 M16-28 09 2022
VIPER XTREM + Threaded Stud ZN 8.8 HDG 8.8 M16-28 09 2022
VIPER XTREM + Threaded Stud ZN 8.8 HDG 8.8 M16-28 09 2022
12
Date : 9/28/2022
Page : 1/8
Comment :
Recommended anchors
VIPER XTREM + Threaded stud Zn 8.8 / HDG 8.8 M16 / hef = 187 mm Product Code: 060189
Base material
Concrete resistance : C30/37
Cracking of concrete : Cracked concrete
Thickness of concrete : 600 mm
Reinforcement type : Dense concrete reinforcement
Edge reinforcement : Straight and closely spaced stirrups
Conditions
Installation conditions : Dry concrete
Short term temperature : 40 °C
Long term temperature : 24 °C
Anchor plate
Thickness of part to be fixed : 12 mm
Recommended plate thickness : The base plate thickness has not been checked
Clearance diameter : 18 mm
Profile : HEA180
Profile position : Ex = 0 mm ; Ey = 0 mm
Stand-off : None
Specifications :
Static
Sustained Load : False
Ref : 9/28/2022 - 2:52:42 PM / Version 2021.10.12
Date : 9/28/2022
Page : 2/8
Geometry :
Calculation Hypothesis :
- The anchoring plate is assumed to be sufficient to resist deformation imposed by the load actions.
- This anchor arrangement can be used close to an edge if the gap between the hole and the fixture is filled with mortar of sufficient
compression strength or eliminate by other suitable means
- Connection between profile and base plate has not been checked
- The calculation is done acc. to expert judgement, based on EN 1992-4
- SPIT can only be held responsible if the calculation examples exactly reflect the application and if the installation is carried out
according to the instruction given in the SPIT specifications. The calculation is correct for SPIT anchors only. The
contractor or specifier should make sure that the base material is able to support the loads especially in the case of a group of
anchors. SPIT cannot be held responsible if this software package is modified without its written approval.
Ref : 9/28/2022 - 2:52:42 PM / Version 2021.10.12
Date : 9/28/2022
Page : 3/8
Loads on anchors
7.9 0.99 0 0
49.08 8.42
Utilization
CALCULATION DETAILS
INSTALLATION DATA
VIPER XTREM + Threaded stud Zn 8.8 / HDG 8.8 M16 / hef = 187 mm Product Code: 060189
Effective embedment : 187 mm
ETA-17/0514 issued 2017/12/13
INSTALLATION Method