Professional Documents
Culture Documents
Print Review: Project Name
Print Review: Project Name
Project Name:
Proposed Residential Development at NKIL No. 6563 Kai Tak Area 1L Site 2, Kai Tak, Kowloon
Date : 2022.03.07
Log No : KQ - P -2061
Customer :Shun Wing Aluminium Works Co., Limited
Distributor : Wah Fung (Universal) Building Materials Co.,Ltd
System Design: 4 sided structural sealant glazing , façade and site glazing application :
- 8mm Clear HS + 12mm Air + 10 mm Clear Tempered Glass
- 6mm Clear Tempered Glass + 1.52mm PVB + 8mm Clear Tempered Glass + 9mm Air Space +
6mm Clear Tempered Glass
Referenced Wind Load Max, Glass Size Sealant Bite Proposed Proposed Tremco
Drawings or (kPa) (Width x Height) Requirement Bite Size Glueline Products Approval
details Thickness
The proposed sealant bite of 10mm x 9mm and 10mm x 12mm is acceptable.
Please note that the above contact width calculation is the absolute minimum that must be achieved by any
part of the structural sealant bite, the designer should include additional tolerances in addition to this
minimum contact width in his design contact width.
Recommendations:
Proglaze II can be used for site glazing / re-glazing, temporary clips shall be installed during the sealant curing stage so
that no unnecessary loading imposed on the panel while the sealant is curing.
The results of the adhesion testing are only valid as long as the supplier certifies that neither the formulation nor
manufacturing process for these materials has been changed.
Application recommendations are based on Tremco Laboratory testing, evaluation and technical specifications.
Sincerely,
Benny Wong,
Sales Manager
9, Bongjae-gill 63th, Dunpo-myun, Asan-si, Chungcheongnam-do,
Korea 31411
http://www.tremco-illbruck.com