Professional Documents
Culture Documents
Ashraf Cad
Ashraf Cad
PROBLEM :1
DATE :
AIM
Draw sectional plan and elevation of a simply supported one way slab with following data:
Size of the room: 3.5mx7.5m
Thickness of the slab= 150 mm
Wall thickness=300mm
Bearing on wall= 200mm
Reinforcement:
Main bars=12mm dia @150mm c/c alternate bars bent up
Distribution steel=8mm diameter @ 200mm c/c
1
CEL 334 CIVIL ENGINEERING SOFTWARE LAB
3900.0000
3700.0000
7500.0000 7500.0000
c/c
m
m
0
15
@
m
m
12
#
150
PLAN
200.0000 200.0000
3700.0000
RESULT
Plan and the cross section of a one way slab has been drawn
NOWFEL K
S6 CIVIL
ROLL NO. : 22
2
CEL 334 CIVIL ENGINEERING SOFTWARE LAB
PROBLEM :2
DATE :
AIM
A continuous one way RCC slab 150mm thick is provided for a college drawing hall 6.5m X 13m
size. The width of the wall is 300mm as per following detail Main reinforcement @ 150 c/c, 12
mm ɸ with U hook at the end of bar Distribution reinforcement @ 200C/c, 8 mm ɸ Size of the
beam is 300 X 600 mm. Slab is monolithic with beam reinforced. Main reinforcement= 4- 20 mm
ɸ 2- legged stirrups 8 mm ɸ @ 150 c/c throughout. Draw the longitudinal section only.
150
300
a
b
320
# 12 mm @ 150 mmc/c
# 12mm @150mm c/c
3200
3
0.25l=800
800
c
640
300
CEL 334 CIVIL ENGINEERING SOFTWARE LAB
a
8 mm @200 mm c/c
3200
RESULT
12600
Longitudinal section of a continuous slab has been drawn.
4-# 20mm
8mm@ 150 c/c
3200
NOWFEL K
h
S6 CIVIL
800
g
640
ROLL NO. : 22
300
PROBLEM :3
640
170
800
DATE :
e
3200
SINGLY REINFORCED BEAM
0.1l
AIM
h
g
300
Draw the L-section and cross section of a simply supported rectangular RCC beam with the
following data
Clear span=3.5m
Bearing on walls=200mm
Overall depth of the beam=300mm
Width of beam=220mm
Main reinforcement =5-12mm ɸ bars, 2 bars bent up at 𝑙 6 ⁄ from the center of support
Stirrups=6mm ɸ at 200 mm c/c
Anchor bars=2- 10mm diameter bars
4
CEL 334 CIVIL ENGINEERING SOFTWARE LAB
300
20 5-12 mm Ø Bars
3400
430 mm
200 200
300 100
Effective Span, l = 3700 mm
L-Section
RESULT
Longitudinal section and cross section of a singly reinforced beam has been drawn.
5
CEL 334 CIVIL ENGINEERING SOFTWARE LAB
NOWFEL K
S6 CIVIL
PROBLEM :4 ROLL NO. : 22
DATE :
CONTINUOUS BEAMS
AIM
Draw the longitudinal section of a continuous beam spanning on two openings of 3m each with
intermediate support 300mm wide.
The end supports are 400mm
Overall depth of beam=300mm
Width of beam =220mm
Main reinforcement=5 nos 12 mm ɸ with 2 bars bent up (HYSD bars)
Anchor bars= 2 Nos 10 mm ɸ
Vertical stirrups= 6 mm ɸ @ 180 c/c
6
CEL 334 CIVIL ENGINEERING SOFTWARE LAB
300
300
RESULT
Longitudinal section of a continuous beam has been drawn
7
CEL 334 CIVIL ENGINEERING SOFTWARE LAB
NOWFEL K
S6 CIVIL
PROBLEM :5 ROLL NO. : 20
DATE :
ISOLATED FOUNDATION
AIM
Draw sectional plan and elevation of a square footing column with for the following data
reinforcement :
Longitudinal bar= 8-20mm dia
Transverse ties=6mm dia @300mmc/c
Base reinforcement=10-10mm dia bars c/c both ways
Column size= 500mmx500mm
Footing size=2.4mx2.4m
Thickness of footing: at free end= 150 mm, at column face= 400mm
Depth below GL=1.0m
8
CEL 334 CIVIL ENGINEERING SOFTWARE LAB
RESULT
Sectional plan and elevation of a square footing has been drawn.
9
CEL 334 CIVIL ENGINEERING SOFTWARE LAB
NOWFEL K
S6 CIVIL
ROLL NO. : 22
10