Professional Documents
Culture Documents
Met S20 041 2400 7
Met S20 041 2400 7
Met S20 041 2400 7
CONTROL DE CAMBIOS
DJ
1 1
DL
47
,10
°
2 2
47,
10°
DL
0
931,05 -1 7
3 3
Galvanizing
drain holes (x4) 30,00
6,00
NOTES:
DETAILDJ SECTION DL-DL -The dimensions of total length and angles correspond to the dimensions necessary for a perfect contact between the different
SCALE 1 : 1 SCALE 1 : 1 components that make up the structure. If, by process, a space is required between the different components, the supplier must
make this adjustment in the dimensions.The maximum gap between profiles will be 1mm.
- If galvanizing drain holes larger than specified are required, consult engineering team. 4
A B C D E