Professional Documents
Culture Documents
Liebert EXS 10-80kVA
Liebert EXS 10-80kVA
10 to 80 kW
Optimized and integrated
three-phase UPS solution
with high efficiency power
protection
Liebert® EXS™ 10 to 80 kW
Output Configuration EXS 10-20 kVA with integrated battery EXS 10-20 kVA with integrated battery
(up to two strings) strings (up to four strings)
Liebert EXS models up to 20 kVA
can be configured on-site to
deliver three (3/3) or single (3/1) UPS UPS
phase output giving it the
flexibility to adapt to changes in 1300 1300
installation environments. Battery Battery
650 650
335 242 335
UPS UPS
1600 UPS
1600 1600
Battery Battery
3
Liebert® EXS™ 10 to 80 kW
In The Field
Parallel Ready
Liebert EXS can be connected Automatic AC Bypass
with up to four units in parallel. A AC Normal AC Normal AC Normal AC Normal
single unit can be upgraded to
parallel operation via easy to
modify software settings, allowing
the system to be customized for
the requested configuration. The
loop parallel connection used in
paralleling the system delivers
ultimate reliability and eliminates
the possibility of a single point of
failure, ensuring perfect load Load
IS-Relay
Relay Card
IS-Unity-DP
10 - 20 kVA 30 - 40 kVA 60 kVA 80 kVA
Card
5
Liebert® EXS™ 10 to 80 kW
Vertiv's service program is First Time Fix Rate Fast Incident Response
designed to ensure that your Pro-active monitoring and data Vertiv LIFE Services allow for
critical power protection system is measuring ensure that when our immediate definition of the best
maintained in an optimum state of customer engineers are course of action, as a result of the
readiness at all times. dispatched on-site, they arrive regular communication between
prepared for first time resolution. your Liebert EXS system and our
The Vertiv LIFE™ Services remote Vertiv LIFE Service centers.
diagnostic and preventive Proactive Analysis
monitoring service provides early Reporting
From Vertiv LIFE Service centers,
warning of UPS conditions and out
our experts proactively analyze the You will receive a comprehensive
of tolerances. This allows effective
data and trends of your equipment, report detailing the working order
proactive maintenance, fast
to recommend actions to ensure of your equipment and its
incident response and remote
their best performance. operational performance.
troubleshooting, giving customers
complete security and peace of
mind. With Vertiv LIFE Services Minimized Total Cost of
you will benefit from: Ownership of Your Equipment
The continuous monitoring of all
relevant parameters in turn
Uptime Assurance maximizes unit performance,
Constant monitoring of UPS reduces on-site maintenance and
parameters, thus maximizing the extends the life of your equipment.
system’s availability.
Technical Specifications
Ratings (kVA / kW ) 10 15 20 30 40 60 80
Input
Input voltage range without battery discharge 173 to 498 V* 228 to 475 V*
Battery
Output
105 % for 60 min; 125 % for 5 min; 150 % for 1 min; 105 % for 60 min; 125 % for 10 min; 150 % for 1 min;
Inverter overload capacity
> 150 % for 200 ms > 150 % for 200 ms
General
Note:
* Conditions apply.
1. Height of the EXS 80 kVA UPS with top ventilation option is 1805 mm
2. Weight is excluding the battery and transformer
3. IP 31 option is available in EXS 20-80 kVA variants
7
Vertiv.com | Asia Pacific
© 2019 Vertiv Co. All rights reserved. Vertiv, and the Vertiv logo trademarks or registered trademarks of Vertiv Co. All other names and logos referred to are trade names, trademarks or registered trademarks of their
respective owners. While every precaution has been taken to ensure accuracy and completeness herein, Vertiv Co. assumes no responsibility, and disclaims all liability, for damages resulting from use of this information or for
any errors or omissions. Speci ications are subject to change without notice.
AP-UPS-EXS-V7-0820-EN