Download as pdf
Download as pdf
You are on page 1of 1
(b) slightly more than atmospheric (©) slightly less than atmospheric (4) pressure slightly more than atmospheric and temperature slightly less than atmospheric _{eypressure sightly less than atmospheric and temperature slightly more than atmospheric. Ans: e 10, isothermal compression effeicency can be attained by running the compressor (a) at very high speed (at very slow speed (c) at average speed (a) at zero speed (€) isothermally Ans: b 11. The compressor capacity with decrease in suction temperature (afincreases (b) decreases () remains unaffected (a) may increase or decrease depending on compressor capacity (e) increases upto certain limit and then decreases. ‘Ans: a 12, Isothermal compression efficiency, even when running at high speed, can be approached by using (a) multi-stage compression (b) cold water spray _Seyboth (a) and (b) above (4) fully insulating the cylinder (e) high stroke. Ans: c 13, Compression efficiency is compared against (a) ideal compression (b) adiabatic compression (c) botii isothermal and adiabatic compression (d) isentropic compression {2) isothermal compression Ans: € 14, Aeroplanes employ following type of compressor (2) radial flow ) axial flow (c) centrifugal (4) combination of above (e) none of the above Ans: b 16. Inter cooling in compressors (2) cools the delivered air (b) results in saving of power in compressing a given volume to given pressure (c) is the standard practice for big compressors (4) enables compression in two stages (e) prevents compressor jacket running very hot. Ans: b 16. An ideal air compressor cycle without clearance on p-v diagram can be represented by following processes _{a}one adiabatic, two isobaric, and one constant volume (b) two adiabatic and two isobaric (c) two adiabatic, one isobaric and one constant volume (A) one adiabatic, one isobaric and two constant volume () two isobaric, two adiabatic and one constant volume. ‘Ans: a 17 An ideal air compressor cycle with clearance on p-v diagram can be represented by followng processes (2) one adiabatic, two isobaric, and one constant volume fw adiabatic and two isobaric ORI 0 SER PETES ee ae PE

You might also like