Professional Documents
Culture Documents
Pic Kit S9
Pic Kit S9
COM
PIC KIT S9
Repair process
PREFACE
Hashboards from Antminer S9 and S9(i)/(j) versions have a component called "PIC",
which may fail to perform properly due to the various circumstances, including (but not limited
to) unstable power supply, heat, etc.
When you see this in your log (accessible on miner's web page: [miner's IP]/kernelLog.html ):
…
Check chain[5] PIC fw version=0x00
chain[5] PIC need restore …
Error of set PIC FLASH addr: addr_H=3(0) addr_L=0(0) on Chain[5]
…
(it could be chain[6] or chain[7] as well)
· Make sure connector is not moving. Signal loss during programming process may brick
your PIC component on hashing board.
· Wait until you see blue signal blinking on the PIC KIT S9
· Press a button on PIC KIT S9
· Red signal will appear on PIC KIT S9 for a couple of seconds
· When red becomes green and blue light continues blinking - you are all done!