Professional Documents
Culture Documents
PS StepByStepBasicInfo
PS StepByStepBasicInfo
FOR HELP:
o HQ tech line: 1-877-697-8458, Opt. 2 8:30-5 MT
o P-S: 1-855-777-5257
o Two Chicks Quilting: 361-771-3978
TURN ON:
o PS carriage
o Simply 16
o PS tablet (software should automatically launch)
TURN OFF:
o File>Shutdown (PS tablet)
o Simply 16
o PS carriage
CHECK SOFTWARE VERSION:
o Information>About and write down version number
o Go to http://prostitcher.com/prostitcher-software-update/
o Click ProStitcher Lite tab and view number on latest version and compare to yours
o If newer, download and extract files on your computer; put .exe file on USB drive
o With tablet on and software open, click File>Update
o Select the update you wish to install and click Start
o Follow prompts until complete
o Restart tablet and quilting machine before using PSL
CROSSHAIRS:
o Orange – gears engaged
o Purple – gears disengaged for free-motion quilting
o Green – simulation mode
o Bring design to crosshairs, not the other way around
o Crosshairs (needle position) used with the Reposition function to determine design position.
SETUP (VERIFY):
o Cruise mode (icon on R) to use ProStitcher
o Speed on machine = 150
o On PS, set speed to 60 and Acceleration to 50 or use OptiStitch
o Load test sandwich and check tension
MISC.:
o Thread: Superior Threads Omni or Fil-Tec Glide 40 wt, Sz 18 needle
Glide – 205-210 TOWA??; if problems with tension, unthread and rethread; turn top tension knob
fully tight, then fully loose, then tighten/adjust
Pokies - if visible on top, top thread is too tight; if visible on bottom, top thread too loose
Eyelashing - when happens on one side, adjust other side
Use Glide foot for lofty batting, applique, etc.
Bobbin: load bobbin into case with thread coming off on top to the right (think “9”)
o
LOADING:
Max. Quilting Area w/PS: 12 1/4”x49” (backing and batting can be wider, pole=67”)
If doing E2E, MEASURE WIDTH and LENGTH OF QUILT before loading
Measure quilt top from center to top
Measure that distance from center of backing to top and mark with pins on sides (red in picture)