Professional Documents
Culture Documents
30.9.2020 Rubberwood
30.9.2020 Rubberwood
Rubberwood sheets
4. Kyln drying: It’s a process done to remove the moisture content fully
from the lumber and immerse chemicals into it, to make it suitable for further
use.
Fig. 187 Cutting of old Rubber- Fig.188 Sawmilling of Rubber- Fig. 189 Non pressure method of
wood trees by using Chainsaw. wood (cutting of logs into lumber) wood preservation i.e. spraying,
diping or soaking lumber into
chemical solution( boric acid,
borax and sodium pentachloro-
phenol (BBP)) as it is susceptible
to fungi.
40
Fig. 190 Kyln drying of lumber by using furnace
type lumber dryer(FTLD so that the moisture
content reaches a low level to destroy the live
conditions of fungus.
Fig. 191 Finger joint machine Fig. 192 Applying adhesive in Fig. 193 Joining different parts
making grooves in the board grooves to join different parts to- together by applying force with
came after drying gether to make finger joint board the help of machine.
Fig.194 Cutting of boards for Fig. 195 Adhesive used for join- Fig. 196 Screwing can be also be
further use. ing different parts. done to join different part.
Timber 41
Fig. 197 Nailing and Hammering Fig. 198 Sanding (used to Fig. 199Final Product
smooth surfaces by abrasion
Properties
Eco-friendly to the max.
Low natural luster.
It is strong, flexible, beautiful grain, light color,
Rubberwood is perishable, and has very little natural resistance to decay.
Color of rubberwood is initially creamy when sawn, but after kiln drying and
exposure to light, the wood turns darker with brownish and pinkish tints.
Dries rapidly with a medium to high risk of warp development. Good stacking
with stickers only 12 inches apart, plus weights on the tops of the piles will
help control warp.
Applications
Maintenance Aspects
In case of any crack happens in the furniture due to high temperature, putty
is used to fill the gaps.
Details/Junctions/joineries
Small rubberwood residues parts are glue together which ends up in longer
pieces and better strength of the joint that is called fingerjoint.
Different timber joineries , Adhesive , nailing and hammering , screwing all Fig. 204 Rubberwood sheets
these are used to make products out of rubberwood sheets.
Timber 43
Case study (Ahemdabad , Gujarat)
Fig. 207 Dinning table Fig. 208 Dinning table Fig. 209 Dinning table
Fig. 210 Butt joint Fig. 211 Biscuit joint Fig. 212 Tongue and groove joint
Fig. 213 Dowel joint Fig. 214 Mortise and tenon joint Fig. 215 Lap joint