Professional Documents
Culture Documents
TDS BS Epoxy 614
TDS BS Epoxy 614
Epoxy 614 is a pre-pigmented normal setting cold pour Use the product as per the requirement of the site use. Mix
epoxy joint filling compound for concrete saw-cut joints. components of Resin 100 parts and Hardener 40 parts , for
This epoxy system has senon-brittle properties and is 2 minutes, with a slow speed drill if the quantity is more
suitable for joint filling applications. Larger volume sealant than 8kgs at one time. Silica quartz can be added to the
can be done by adding M10 sand / Silica Quartz . This mixed material resin system till the desired flow is
product supports the joint edges and reduces spalling of achieved. Mixed material should be consumed within 60
the edges caused by wheel traffic. This System has been minutes of mixing.
designed for use under ACT 302, Section 4.10
recommended for epoxy joint fillers.
Cleaning of Tools
Features of BS Epoxy 614
Tools and equipment contaminated with epoxy can be
BS Epoxy 614 system is characterized by- cleaned with suitable solvent. Cleaning should be done
before it starts to gel or harden.
1) Excellent adhesion to Concrete.
2) Self priming properties Properties of Material Supplied
3) Easy to use, cold pour.
4) Normal Setting Value Unit Epoxy 614 R Epoxy 614 H
5) Can be used at varying thickness.
6) Excellent trafficability. Type of
-
Modified
Polyamide
7) High moisture resistance. Compound epoxy
8) Semi Rigid Properties Yellow, clear to
9) Allows for limited temperature and humidity Colour & Grey or Black
- slightly hazy
Appearance viscous liquid
movement of concrete. liquid
10) Tough performance reduces floor joint repairs and
maintenance. Solids at
11) Suitable for filling cracks in older floors to reduce the % 84±2
1200C
65 ± 3
rate of deterioration.
1. Concrete construction and control joints in industrial Mixing Proportions & Pot Life
floors.
2. Crack filler repair for old floors. Name (Parts by
Pot life
weight)
Application Methods BS Epoxy 614
Surface Preparation-All surfaces must be sound, clean, dry, Epoxy 614 R : Mixture@30ºC :
100 : 40
and free from oil, grease, cement laitance and all loosely 614 H Approx.60 min.
adhering particles.
1 Buildsmart Construction Chemicals Pvt Ltd an ISO 9001:2015 & ISO 14001:2015 Certified Company.
Corporate Office: SB 114(A), Lal Kothi, Tonk Road, Jaipur-302015, Rajasthan, INDIA.
PH: +91 (141) 4012629, 2709468 Fax: +91 (141) 2710227
Email: mail@buildsmart.in Website: www.buildsmart.in
Note: Information In this document may be changed without any notice. Please Confirm for the latest updates on product lines.
Smart Chemistry for Construction
Touch Dry: 6 - 8 hrs, Trafficable 24 hours. ● Do not use this system as an expansion joint
sealant.
Technical Properties ● Use only at temperatures above 100 C.
● Contact surfaces must be cleaned and dry.
● Epoxy Sealants should be applied after sufficient
Property UOM Values
curing of the concrete slab for best results
Tack free time at 250 C Hours 12 Use gloves, goggles and barrier cream. Avoid contact with
skin. Ensure adequate ventilation during application. For
further details, refer to the Material Safety Data Sheet.
Shore A Hardness >100
2 Buildsmart Construction Chemicals Pvt Ltd an ISO 9001:2015 & ISO 14001:2015 Certified Company.
Corporate Office: SB 114(A), Lal Kothi, Tonk Road, Jaipur-302015, Rajasthan, INDIA.
PH: +91 (141) 4012629, 2709468 Fax: +91 (141) 2710227
Email: mail@buildsmart.in Website: www.buildsmart.in
Note: Information In this document may be changed without any notice. Please Confirm for the latest updates on product lines.