Wear =
Si
POWER TOOLS INSPECTION CHECKLIST
i
Type of tools: Grind Machine location: Ho GAs /wew Gon
(Serialnumber: — 3o.30/ R Make/Manufacturer: A/c.
“one power tool only per checklist
“Mack the box with (Yi Satisfactory, (X) If Unsatistactory, and (N/A) if Not Applicable
Dates of Inspection (dd/mm/yy)
bona rere ron
¢
a a
39-22
v
a
a
Items to be checked
1_|[Srounding/double insulation OK
3 [Trigger lock disabled/not equipped
=f
Safety guards in good condition
No wobble in shaft
No burns on casing
JAttachments suitable (speed, size)
jw
a
8
[2 [Flexible shaft in good condition Vv
10 |Proper storage available
11 [Tool shaft turn freely be
12 [No grease, metallic dust on tool
13 [Ventilating slots are clean
[Coriied by an Tidependent testing and
*4 Veernicaion wsaentunseunsie)
Taspected by HF
[Aftab Alam - Competent Electrician I
eres by satety otters A any
Remar: 4 9f vas chcewealWas
sas
POWER TOOLS INSPECTION CHECKLIST
Type of tools: Gooiclar Afmohine
Location:
UGRS/ New Ga
[Serial number: 4 4563 R
|Make/Manufacturer:
Mataks
one power tool only per checklist
"Mark the box with (vif Satisfactory, X) if Unsatisfactory, and (N/A) if Not Applicable
Dates of Inspection (daymm/vy)
seas a ns
Taye
as
RRUECHS|E Je de fe fe fe le fa
Items to be checked siel
1 |Grounding/double insulation OK wv
2. [Plug and cord free from defects i
3. [Trigger lock disabled/not equipped
4 [Safety guards in good con:
5_|No wobble in shaft
Adjusting key available
rH
No burns on casing
9. [Flexible shaft in good condition
Proper storage available
11 [Tool shaft turn freely
Ct
Et
12 |No grease, metallic dust on tool
13 [Ventilating slots are clean
[Certived by an dependant testing and
certification uyrmntian etc.)
14
inspected by:
[Aftab Alam - Competent Electrician
—
Neried by safety officer A. og
U
Rematks:4 seve Hatta
fb is aeed Card ition &
was\w GAR
Soot
POWER TOOLS INSPECTION CHECKLIST
[rsp oftools: Grincken
Serialnumber: 96 gy
Mesbine location: A/c) GQ
& Make/Manufacturer: Ya icc.
New Gay
“one power tool anly per checklist
“Mark the box with (¥) if Satisfactory,
r
2)
Items to be checked
1_|Srounding/double insulation OK
Plug and cord free from defects
0%) if Unsatisfactory, and (N/A) if Not Applicable
Dates of Inspection (ad/mm/yy)
al af
ag JES [en a |e a
3. [Trigger lock disabled/not equipped
Safety guards in good condition
5. |No wobble in shaft
+
6 [Adjusting key available
7. [No burns on casing
8 [Attachments suitable (speed, size)
9. |Flexible shaft in good condition
10 [Proper ‘Storage available
[Tool shaft turn freely
12 |No grease, metallic dust on tool
13 [Ventilating slots are clean
4
[CertTvee by an independent testing an
eertitication,usmxswa ec.)
inspected by:
jAftab Alam - Competent Electrician
Verified by Safety officer: Any
++]
ae
Remarks:
4 OF esas Sosenwed that Ainiga kudep
th 2s good C. dition & antely Cal Che vf
0 i Lowe toals,Wess
E
POWER TOOLS INSPECTION CHECKLIST
Type of tools: Cun > Fr
Serial number: G 87 02. (>
\<
bocation: fib 2m Donte ph |
IMake/Manufacturer: SWAT F
“one power tool only per checklist
Items to be checked
“Mark the box with (¥) if Satisfactory, (X) if Unsatisfactory, and (N/A) if Not Applicable
Dates of inspection (dd/mm/yy)
put the dates below one column is for ono Jy inspection
x
1. |Grounding/double insulation OK
Plug and cord free from defects
Trigger lock disabled/not equipped
Safety guards in good condition
5 |No wobble in shaft
Adjusting key available
No burns on casing
|Attachments suitable (speed, size)
Flexible shaft in good condition
Proper storage available
11 |Tool shaft turn freely
12 |No grease, metallic dust on tool
13 |Ventilating slots are clean
14 |Certed By an independent testing and
certication excea Keune
inspected whe
[Aftab Alam - Competent Electrician
\Verified by Safety Officer:
Remarks:Was &
POWER TOOLS INSPECTION CHECKLIST
Type oftoos: rw er Location; Pf, ern “Done K
:
Serial number: BIS~71 TL IMake/Manutacturer: (MACY A
“one power tool only per checklist
“Mark the box with (Y) if Satisfactory, (X) if Unsatisfactory, and (N/A) if Not Applicable
Daksa pean GOTT
Aye]
=
jai
Items to be checked
Grounding/double insulation OK
2 |Plug and cord free from defects
{+}
9,
[\ le,
3. [Trigger lock disabled/not equipped
4 |Safety guards in good condition
\ARARR
AIN
5. |No wobble in shaft
CANA
6 Adjusting key available
7. [No burns on casing
AIA
NIN
8 attachments suitable (speed, size)
Flexible shaft in good condition
10 |Proper storage available
[Tool shaft turn freely
12 |No grease, metallic dust on tool
13 | Ventilating slots are clean
[Ceriied by an independent testing and
[28 Icertitication uemxema neunte,
Inspected
14
[Aftab Alam - Competent Electrician
ified by Safety Officer:
Remarks: