Professional Documents
Culture Documents
Amnon
Amnon
www.jainsusa.com
Amnon Drip Emitterline
Product Features
■ Pressure-Compensating (PC) for maximum accuracy at variable topography and long
laterals
■ Cascade labyrinth provides strong self-cleaning turbulence
CNL ■ Hydrodynamic dripper design ensures continuous flushing of sediments and small dirt
particles
■ Low CV for maximal uniformity
■ Weir structure prevents root intrusion and sand separation
■ Side water inlet structure improves clog resistance
■ High-quality diaphragm
Applications
■ Versatile, all-purpose dripline
■ Pulse irrigation of greenhouses, vegetables and orchards
■ Subsurface Drip Irrigation (SDI)
AS
■ Reduces filling time for large fields with long rows
Special Models
■ CNL: Pressure-compensating non-drainage design reduces lateral filling time and
facilitates pulse irrigation.
■ AS: Pressure compensating anti-syphon design prevents suction at draining stage.
Suitable for subsurface drip irrigation.
2 www.jainsusa.com
Amnon Drip Emitterline
Tubing Specifications
Packing Data
Roll I.D. 16 16 16 16
Roll O.D. 32 32 32 32
Roll Width 9 9 10 13
Rolls/Pallet 24 24 24 24
Rolls/Truck
711 711 645 474
(Hand Stacked)
Filtration Requirements
Minimum disc filtration 120 mesh. Minimum screen filtration 140 mesh. In addition to fil-
tration, control of algae and bacterial slime growth and control of chemical precipitates
should be taken into consideration.
Technical data
Flow rates 0.29 gph 0.42 gph 0.58 gph 1.00 gph
Cv <5% <5% <5% <5%
K 0.29 0.42 0.58 1
x 0 0 0 0
Filtration 120 Mesh
PC 7 - 58 PSI
Anti-Siphon 7 - 58 PSI
CNL 14 - 58 PSI
CNL Opening 14 PSI
CNL Closing 3.6 PSI
Ordering Guide
Size Wall Flow Spacing Indicator Length
mm inches GPH @ 10 PSI inches Emitter Feet
AP16
12 PC 100
.640" O.D. x .550" I.D. 0.35
0.29 18
AP17
24
0.40 0.42
.660" O.D. x .560" I.D. 30
CNL 500
AP18 36
0.45 * 0.58
42
.710" O.D. x .620" I.D.
0.92 48
AP20 0.50 AS 1000
60
.800" O.D. x .710" I.D.
Model: AP18-45-42-30-1000
Description: Amnon PC 18 mm 0.45 wall .42 GPH 30" spacing 1000'
* Standard wall thinckness
25
20
15
10
5
0
0 400 800 D 1200 1600 2000 2400 2800
Dripline Length (feet)
Amnon 16mm 0.42 gph, 0% Slope
40
35
30
Head Loss (psi)
25
20
15
10
5
0
0 400 800 1200 1600 2000
Dripline Length (feet)
30
25
20
15
10
5
0
0 400 800 1200 1600
Dripline Length (feet)
Amnon 16mm 1.0 gph, 0% Slope
40
35
30
Head Loss (psi)
25
20
15
10
5
0
0 400 800 1200
Dripline Length (feet)
©2011 Jain Irrigation, Inc. www.jainsusa.com 5
Amnon Drip Emitterline
Head Loss v. Dripline Length- Amnon
12" 18" 24" 30" 36" 42" 48" 60"
25
20
15
10
5
0
0 400 800 1200 1600 2000 2400 2800
Dripline Length (feet)
25
20
15
10
5
0
0 400 800 1200 1600 2000 2400
Dripline Length (feet)
25
20
15
10
5
0
0 400 800 1200 1600
Dripline Length (feet)
Amnon 17mm 1.0 gph, 0% Slope
40
35
30
Head Loss (psi)
25
20
15
10
5
0
0 400 800 1200
Dripline Length (feet)
6 www.jainsusa.com ©2011 Jain Irrigation, Inc.
Amnon Drip Emitterline
Head Loss v. Dripline Length- Amnon
12" 18" 24" 30" 36" 42" 48" 60"
Amnon 18mm 0.29 gph, 0% Slope
40
35
Head Loss (psi)
30
25
20
15
10
5
0
0 400 800 1200 1600 2000 2400
Dripline Length (feet)
Amnon 18mm 0.42 gph, 0% Slope
40
A
35
Head Loss (psi)
30
25
20
15
10
5
0
0 400 800 1200 1600 2000 2400
Dripline Length (feet)
Amnon 18mm 0.58 gph, 0% Slope
40
35
Head Loss (psi)
30
25
20
15
10
5
0
0 400 800 1200 1600 2000
Dripline Length (feet)
25
20
15
10
5
0
0 400 800 1200 160
Dripline Length (feet)
©2011 Jain Irrigation, Inc. www.jainsusa.com 7
Amnon Drip Emitterline
Head Loss v. Dripline Length- Amnon
12" 18" 24" 30" 36" 42" 48" 60"
25
20
15
10
5
0
0 400 800 1200 1600 2000 2400 2800
Dripline Length (feet)
Amnon 20mm 0.42 gph, 0% Slope
40
35
30
Head Loss (psi)
25
20
15
10
5
0
0 400 800 1200 1600 2000 2400 2800
Dripline Length (feet)
25
20
15
10
5
0
0 400 800 1200 1600 2000 2400
Dripline Length (feet)
25
20
15
10
5
0
0 400 800 1200 1600 2000
Dripline Length (feet)
8 www.jainsusa.com ©2011 Jain Irrigation, Inc.
Amnon Drip Emitterline
Amnon Maximum Lateral Lengths (0% Slope)
16 mm (0.630 x 0.540)
Water quality is a factor in maintaining micro-irrigation systems. A water quality test will measure silt or
sand; algae; bacteria; dissolved solids such as iron, sulfar, salts, and calcium; and the pH of the water. For
more information on micro-irrigation system maintenance, contact your Extension agent and
micro-irrigation manufacturer.
Maintenance Tasks
■ Annually treat system with acid to neutralize calcium carbonates if the water is “hard.” Consult
equipment manufacturer for type of acid and treatment interval.
Regularly
■ Irrigation system evaluation by trained professional is highly recommended
■ Check for leaks, rodent damage, and mechanical damage
■ Inspect pressure-regulating valves and pressure gauges for correct operation and pressure readings.
Liquid-filled pressure gauges are recommended
■ Flush lateral lines. Depending on water quality and filtration system, flushing should be done bi-weekly
are after fertilizer or chemical injection or chlorination
■ Regularly check for and clean or replace clogged emitters.
■ Check emitters for correct flow.Take precise measurements at least twice each year by catching the flow
from several emitters in a calibrated cylinder (such as rain gauge) during a carefully time interval
■ Backwash filters either manually or using automatic cycle, depending on system design and type of filter.
■ Replace cartridge filters.
■ If media (such as sand) cakes, replace media. For sand filters, periodically supplement with additional
media
■ Chlorinate system with 10 ppm if water has high organic load.
■ If clogging due to organic matter continues to be problem, inject 50-100 ppm of chlorine and allow to
sit for 24 hours.
■ If clogging due to precipitates (such as calcium carbonate) persists, inject system with acid to lower pH
to about 5.0 Allow to sit for 24 hours. Contact equipment manufacturer before undertaking this task
to determine the minimum pH allowable for system type.
At Season Shutdown
■ Treat entire system with 40 ppm residual chlorine concentration for at least four hours, and completely
flush the system.
■ Drain water from all pipelines. The system may have to be blown out lateral by lateral with an air
compressor to accomplish this. Don’t exceed 15 to 20 psi of air pressure, or you’ll blow off the emitters.
Polyethylene pipes can withstand some freezing without breaking, so it isn’t critical that all water be
removed. In cases where remaining water may be a problem, however, add a gallon of non-toxic
antifreeze (type used in RV’s) to the piping system and distribute it throughout with compressed air.
More antifreeze may be necessary for larger systems.
2851 E. Florence Ave. P.O. Box 3760 740 Water St. P.O. Box 3546 • Haines City, FL 33845
Fresno, CA 93721 Ontario, CA 91761 Watertown, NY 13601 3857 W. Lake Hamilton Dr.
Ph 800-695-7171 Ph 800-828-9919 Ph 800-242-7467 Winter Haven, FL 33881
Fax 888-434-3747 Fax 800-777-6162 Fax 866-329-2427 Ph 800-848-8153 • Fax 800-533-6421
©2011 Jain Irrigation, Inc. • All rights reserved. • www.jainsusa.com Amnon Emitterline rev 10/11 • Part # 91500060